исправлено неправильно считывание модбас настроек и окончательно добавлена микросекундняа задержки при прямом тесте диода

- дефайны и настройки нормально переименованы (A_POS, A_NEG, B_POS, B_NEG, TIME_FOR_FORWARD, TIME_FOR_REVERSE)
- Добавлена микросекундная задержка для прямого включения (прямое включение на заданное колво микросекунд)
- Кнопка переделана на подтягивание к нулю

.gitignore

@@ -101,3 +101,39 @@ compile_commands.json
 
 *_qmlcache.qrc
 
+
+
+
+# ---> MATLAB
+# Windows default autosave extension
+*.asv
+
+# OSX / *nix default autosave extension
+*.m~
+
+# Compiled MEX binaries (all platforms)
+*.mex*
+
+# Packaged app and toolbox files
+*.mlappinstall
+*.mltbx
+
+# Generated helpsearch folders
+helpsearch*/
+
+# Simulink code generation folders
+slprj/
+sccprj/
+
+# Matlab code generation folders
+codegen/
+
+# Simulink autosave extension
+*.autosave
+
+# Simulink cache files
+*.slxc
+
+# Octave session info
+octave-workspace
+

MATLAB/sim_model_init.m

@@ -0,0 +1,37 @@
+% Инициализация параметров модели
+clear, clc
+
+Ts = 1e-7;
+
+% первое число      - инициализация
+% второе число      - время подключения DC1 к цепи
+% третье число      - время отключения DC1 от цепи
+% четвертое число   - время подключения DC2 к цепи
+% пятое число       - время отключения DC2 от цепи
+switch_time = [0 0.01 0.011 0.03 0.031 0.05 0.051];
+
+
+DC1_V = 5;
+DC2_V = 5;
+
+
+R1_R = 10000;
+R2_R = 1;
+% L1_L = ;
+R3_R = 1;
+C1_C = 1e-6;
+
+D1_R            = 1e-3;
+D1_L            = 1e-6;
+D1_Voltage      = 0.8;
+D1_SnubberR     = 500;
+D1_SnubberC     = 250e-9;
+
+
+SW_R = 1e-3;
+SW_SnubberR = 1e5;
+SW_SnubberC = inf;
+
+
+AC_V = 5;
+AC_Freq = 5;

README.md

@@ -1,2 +1,117 @@
 # Diod_Test
 
+## Управление тестером 
+Тест может запускаться по кнопке или по коилу №2 `StartTest`. 
+Режим тестирования (прямое/обратное включение) выставляется в двух коилах:
+- 0: `ForwardTest` - тест диода в прямом включении (напряжение при прямом вкючении)
+- 1: `ReverseTest` - тест диода в обратном включении (скачок напряжения при обратном вкючении)
+Если включены оба, то будет тест скачка напряжения при переходе от прямого подлключения к обратному. 
+
+Можно переключать отдельные ключи по коилам №3-6:
+- 3: `KeyForwardHiTest` - включение и отключение ключа верхнего плеча фазы А (прямое включение) 
+- 4: `KeyForwardLoTest` - включение и отключение ключа нижнего плеча фазы А (прямое включение) 
+- 5: `KeyReverseHiTest` - включение и отключение ключа верхнего плеча фазы Б (обратное включение) 
+- 6: `KeyReverseLoTest` - включение и отключение ключа нижнего плеча фазы Б (обратное включение) 
+
+Результаты измерений при разных включениях записываются в input регистры №0-1:
+- 0: `ForwardVoltage` - измеренное напряжение при прямом включении
+- 1: `ReversePeakVoltage` - максимальный скачок напряжения при обратном включении
+
+## Настройка таймингов
+Тайминги выставляются в holding регистрах №0-4:
+  - 0: `TimeForForward` - время на которое диод включается в прямом направлении (мс или мкс)
+  - 1: `TimeForReverse` - время на которое диод включается в обратном направлении (мс или мкс)
+  - 2: `TimeBeforeTest` - время которое выжидается перед началом тестирования (мс или мкс)
+  - 3: `TimeDeadtime` - время между переключениями фаз (мс или мкс)
+  - 4: `TimeBeforePeak` - время между включением АЦП и подключением обратного напряжения (мс или мкс)
+
+В коилах №16-19, можно выставить флаги - включить миллисекундную задержку вместо микросекундной для соответствующего тайминга:
+  - 16: `msTimeForForward_enable`
+  - 17: `msTimeForReverse_enable`
+  - 18: `msTimeBeforeTest_enable`
+  - 19: `msTimeDeadtime_enable`
+  - 20: `msTimeBeforePeak_enable`
+
+## Настройка АЦП
+Настройки АЦП выставляются в holding регистрах №5-9:
+  - 5: `Adc_PulseWidth` - ожидаемая длительность импульса в отчетах ацп.
+На основе этого параметра берется выборка по которой расчитывается среднее значение пик (пик +-Adc_PulseWidth/2)
+  - 6: `Adc_PulseSign` - полярность скачка напряжения при обратном включении
+  - 7: `Adc_CalibrValue` - калибровочное значение ацп
+  - 8: `Adc_ZeroValue` - нулевое значение ацп
+  - 9: `Adc_U_Calibr` - калибровочное напряжение ацп
+
+Из этого рассчитывается шаг АЦП: `Adc_U_Calibr/(Adc_CalibrValue - Adc_ZeroValue)`
+
+
+# Тестирование
+## Тест в прямом подключении (`TESTER_TestDiode_Forward`)
+- ожидается задержка, перед началом работы `ticks_before_test`
+- включается АЦП в континуес режиме 
+- диод подключается в прямом направлении на заданное время `ticks_for_forward`.
+- считывается АЦП и накапливаются заданное количество для расчета среднего. и так по кругу пока диод подключен
+- после таймаута отключается напряжение и останавливается АЦП
+
+По итогу сохраняется напряжение прямого включения диода `htest->DiodeForwardVolt`.
+
+## Тест в обратном подключении (`TESTER_TestDiode_Reverse`)
+- ожидается задержка, перед началом работы `ticks_before_test`
+- включается АЦП в дма режиме 
+- ожидается задержка, перед предполагаемым скачком `ticks_before_peak`
+- диод подключается в обратном направлении на заданное время `ticks_for_reverse`, и отключается
+- после дожидается окончание заполнения буфера ДМА и обрабатывается: находится минимальный/максимальный пик и среднее напряжение в том районе
+
+По итогу сохраняется скачок напряжение при обратном включении диода `htest->DiodeReversePeakVolt`.
+
+## Тест перехода из прямого подключении в обратное (`TESTER_TestDiode_SwitchConnection`)
+- ожидается задержка, перед началом работы `ticks_before_test`
+- диод подключается в прямом направлении на заданное время `ticks_for_forward`
+- после истечения задержки сохраняется прямое напражение на диоде
+- диод отключается от питания и выжидается мертвое время `ticks_deadtime`
+- включается АЦП в дма режиме
+- ожидается задержка, перед предполагаемым скачком `ticks_before_peak`
+- диод подключается в обратном направлении на заданное время `ticks_for_reverse`
+- дожидается окончание заполнения буфера ДМА и обрабатывается: находится минимальный/максимальный пик и среднее напряжение в том районе
+
+По итогу сохраняется напряжение прямого включения диода `htest->DiodeForwardVolt` и скачок при обратном `htest->DiodeReversePeakVolt`.
+
+
+
+# Внутренняя настройка
+В начале программы в регистрах модбас выставляются дефолтные настройки из tester_config.h (`TESTER_Set_Default_Settings`)
+После эти настройки подтягиваются в структуры тестера, через отдельную функцию (`TESTER_UpdateSettings`). Она вызывается перед каждым тестом.
+## tester_config.h
+Содержит дефолтные настройки для таймингов (`TESTER_SW_TIMINGS_CONFIG`):
+- количество тиков и дефайн для включения миллисекундной разных задержек.
+
+для светодиода и кнопки (`TESTER_INTERFACE_CONFIG`):
+- состояния пина для включения и выключения светодиода
+- порт и пин светодиода
+- частоты моргания для разных режимов работы
+- состояния пина при нажатой и отжатой кнопки
+- порт и пин кнопки
+- задержка для выжидания дребезга
+
+для управления ключами (`TESTER_PHASE_SW_CONFIG`):
+- `USE_HAL_GPIO_FUNCTIONS` - использовать HAL_GPIO-функции. Без неё переключается быстрее
+- `RECONNECT_WITHOUT_DEADTIME` - отключить дедтайм при переключении. Если отключить еще и USE_HAL_GPIO_FUNCTIONS, то переключатся фазы будут почти синхронно (быстрее десятков мкс). Хз надо ли такое, но возможность есть
+- порт и пины для двух ключей обратного подключения диода (порт общий для двух ключей)
+- порт и пины для двух ключей обратного подключения диода (порт общий для двух ключей)
+
+для АЦП (`TESTER_ADC_CONFIG`):
+- размер dma буффера (`ADC_BUFF_SIZE, ADC_DMA_BUFF_SIZE`)
+- калибровочное напряжение АЦП (`ADC_U_CALIBR`)
+- значение АЦП при калибровочном напряжении (`ADC_VALUE_CALIBR`)
+- значение АЦП при нулевом напряжении (`ADC_VALUE_ZERO`)
+- таймаут на чтение АЦП (`ADC_READ_TIMEOUT_MS`)
+- ожидаемая длина импульса в отсчетах АЦП (`TESTER_ADC_PULES_EXPETCED_WIDTH`)
+Из этого рассчитывается шаг АЦП: `Adc_U_Calibr/(Adc_CalibrValue - Adc_ZeroValue)`
+
+## Структуры для настроек
+Настройки для таймингов записываются в структуру `SwTimings`, которая находится в `htest`/`hTestDiode (глобально)`, а она уже в главной структуре проекта `TESTER`.
+
+Настройки светодиода и кнопки записываются в структуры `leds.LED1` и `SwStart`. Они находятся в структуре проекта `TESTER`
+
+Настройки для портов и пинов ключей записываются в структуры `SwPhaseForward` и `SwPhaseReverse`, которые находится в `htest`/`hTestDiode (глобально)`, а она уже в главной структуре проекта `TESTER`.
+
+Настройки для АЦП записыватся в структуру `TESTER.htest->adc->chAdc.s` (`ADC_ParamsTypeDef`).

TERMINAL/proj_term.aliases

@@ -0,0 +1,3 @@
+[My Computer]
+My Computer = "10.0.85.2"
+

TERMINAL/proj_term.lvlps

@@ -0,0 +1,3 @@
+[ProjectWindow_Data]
+ProjectExplorer.ClassicPosition[String] = "193,1137,1207,2095"
+

TERMINAL/proj_term.lvproj

@@ -0,0 +1,23 @@
+<?xml version='1.0' encoding='UTF-8'?>
+<Project Type="Project" LVVersion="19008000">
+	<Item Name="My Computer" Type="My Computer">
+		<Property Name="server.app.propertiesEnabled" Type="Bool">true</Property>
+		<Property Name="server.control.propertiesEnabled" Type="Bool">true</Property>
+		<Property Name="server.tcp.enabled" Type="Bool">false</Property>
+		<Property Name="server.tcp.port" Type="Int">0</Property>
+		<Property Name="server.tcp.serviceName" Type="Str">My Computer/VI Server</Property>
+		<Property Name="server.tcp.serviceName.default" Type="Str">My Computer/VI Server</Property>
+		<Property Name="server.vi.callsEnabled" Type="Bool">true</Property>
+		<Property Name="server.vi.propertiesEnabled" Type="Bool">true</Property>
+		<Property Name="specify.custom.address" Type="Bool">false</Property>
+		<Item Name="TEST_DIOD.vi" Type="VI" URL="../TEST_DIOD.vi"/>
+		<Item Name="Dependencies" Type="Dependencies">
+			<Item Name="vi.lib" Type="Folder">
+				<Item Name="Error Cluster From Error Code.vi" Type="VI" URL="/&lt;vilib&gt;/Utility/error.llb/Error Cluster From Error Code.vi"/>
+				<Item Name="MB Master.lvlib" Type="Library" URL="/&lt;vilib&gt;/Plasmionique/MB Master/MB Master.lvlib"/>
+				<Item Name="MB_VISA_Lock.lvlib" Type="Library" URL="/&lt;vilib&gt;/Plasmionique/MB Master/MB_VISA_Lock/MB_VISA_Lock.lvlib"/>
+			</Item>
+		</Item>
+		<Item Name="Build Specifications" Type="Build"/>
+	</Item>
+</Project>

diode_tester/Core/Inc/adc.h

@@ -0,0 +1,52 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    adc.h
+  * @brief   This file contains all the function prototypes for
+  *          the adc.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __ADC_H__
+#define __ADC_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern ADC_HandleTypeDef hadc1;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_ADC1_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_H__ */
+

diode_tester/Core/Inc/dma.h

@@ -0,0 +1,52 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    dma.h
+  * @brief   This file contains all the function prototypes for
+  *          the dma.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __DMA_H__
+#define __DMA_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* DMA memory to memory transfer handles -------------------------------------*/
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_DMA_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_H__ */
+

diode_tester/Core/Inc/gpio.h

@@ -0,0 +1,49 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    gpio.h
+  * @brief   This file contains all the function prototypes for
+  *          the gpio.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __GPIO_H__
+#define __GPIO_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_GPIO_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ GPIO_H__ */
+

diode_tester/Core/Inc/main.h

@@ -0,0 +1,97 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define PhaseAHiResponse_Pin GPIO_PIN_3
+#define PhaseAHiResponse_GPIO_Port GPIOA
+#define PhaseAHiResponse_EXTI_IRQn EXTI3_IRQn
+#define PhaseALoResponse_Pin GPIO_PIN_4
+#define PhaseALoResponse_GPIO_Port GPIOA
+#define PhaseALoResponse_EXTI_IRQn EXTI4_IRQn
+#define PhaseBHiResponse_Pin GPIO_PIN_5
+#define PhaseBHiResponse_GPIO_Port GPIOA
+#define PhaseBHiResponse_EXTI_IRQn EXTI9_5_IRQn
+#define PhaseBLoResponse_Pin GPIO_PIN_6
+#define PhaseBLoResponse_GPIO_Port GPIOA
+#define PhaseBLoResponse_EXTI_IRQn EXTI9_5_IRQn
+#define PhaseAHi_Pin GPIO_PIN_0
+#define PhaseAHi_GPIO_Port GPIOB
+#define PhaseALo_Pin GPIO_PIN_1
+#define PhaseALo_GPIO_Port GPIOB
+#define PhaseBHi_Pin GPIO_PIN_10
+#define PhaseBHi_GPIO_Port GPIOB
+#define PhaseBLo_Pin GPIO_PIN_11
+#define PhaseBLo_GPIO_Port GPIOB
+#define PhaseAHiSignal_Pin GPIO_PIN_12
+#define PhaseAHiSignal_GPIO_Port GPIOB
+#define PhaseALoSignal_Pin GPIO_PIN_13
+#define PhaseALoSignal_GPIO_Port GPIOB
+#define PhaseBHiSignal_Pin GPIO_PIN_14
+#define PhaseBHiSignal_GPIO_Port GPIOB
+#define PhaseBLoSignal_Pin GPIO_PIN_15
+#define PhaseBLoSignal_GPIO_Port GPIOB
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

diode_tester/Core/Inc/stm32f1xx_hal_conf.h

@@ -0,0 +1,391 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CONF_H
+#define __STM32F1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+
+#define HAL_MODULE_ENABLED
+  #define HAL_ADC_MODULE_ENABLED
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_CAN_MODULE_ENABLED   */
+/*#define HAL_CAN_LEGACY_MODULE_ENABLED   */
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_CORTEX_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_DAC_MODULE_ENABLED   */
+#define HAL_DMA_MODULE_ENABLED
+/*#define HAL_ETH_MODULE_ENABLED   */
+/*#define HAL_FLASH_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+/*#define HAL_I2C_MODULE_ENABLED   */
+/*#define HAL_I2S_MODULE_ENABLED   */
+/*#define HAL_IRDA_MODULE_ENABLED   */
+/*#define HAL_IWDG_MODULE_ENABLED   */
+/*#define HAL_NOR_MODULE_ENABLED   */
+/*#define HAL_NAND_MODULE_ENABLED   */
+/*#define HAL_PCCARD_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+/*#define HAL_HCD_MODULE_ENABLED   */
+/*#define HAL_PWR_MODULE_ENABLED   */
+/*#define HAL_RCC_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SD_MODULE_ENABLED   */
+/*#define HAL_MMC_MODULE_ENABLED   */
+/*#define HAL_SDRAM_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SPI_MODULE_ENABLED   */
+/*#define HAL_SRAM_MODULE_ENABLED   */
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED   */
+
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    8000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE               40000U    /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature. */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    32768U /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            15U    /*!< tick interrupt priority (lowest by default)  */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    8U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32f1xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f1xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "Legacy/stm32f1xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t* file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CONF_H */
+

diode_tester/Core/Inc/stm32f1xx_it.h

@@ -0,0 +1,73 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_IT_H
+#define __STM32F1xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void EXTI3_IRQHandler(void);
+void EXTI4_IRQHandler(void);
+void DMA1_Channel1_IRQHandler(void);
+void EXTI9_5_IRQHandler(void);
+void TIM2_IRQHandler(void);
+void TIM3_IRQHandler(void);
+void USART1_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_IT_H */

diode_tester/Core/Inc/tim.h

@@ -0,0 +1,55 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    tim.h
+  * @brief   This file contains all the function prototypes for
+  *          the tim.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TIM_H__
+#define __TIM_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern TIM_HandleTypeDef htim2;
+
+extern TIM_HandleTypeDef htim3;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_TIM2_Init(void);
+void MX_TIM3_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_H__ */
+

diode_tester/Core/Inc/usart.h

@@ -0,0 +1,52 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usart.h
+  * @brief   This file contains all the function prototypes for
+  *          the usart.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USART_H__
+#define __USART_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern UART_HandleTypeDef huart1;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_USART1_UART_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USART_H__ */
+

diode_tester/Core/Interfaces/crc_algs.c

@@ -0,0 +1,116 @@
+#include "crc_algs.h"
+
+
+uint32_t CRC_calc;
+uint32_t CRC_ref;
+
+//uint16_t CRC_calc;
+//uint16_t CRC_ref;
+
+
+// left this global for debug
+uint8_t uchCRCHi = 0xFF;  
+uint8_t uchCRCLo = 0xFF; 
+unsigned uIndex;    
+
+
+uint32_t crc32(uint8_t *data, uint32_t data_size)
+{
+	static const unsigned int crc32_table[] =
+{
+	0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, 
+	0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, 
+	0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, 
+	0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, 
+	0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, 
+	0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, 
+	0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, 
+	0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, 
+	0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, 
+	0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, 
+	0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, 
+	0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, 
+	0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, 
+	0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, 
+	0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, 
+	0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, 
+	0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, 
+	0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, 
+	0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, 
+	0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, 
+	0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, 
+	0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, 
+	0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, 
+	0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, 
+	0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, 
+	0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, 
+	0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, 
+	0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, 
+	0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, 
+	0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, 
+	0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, 
+	0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+};  
+unsigned int crc = 0xFFFFFFFF;
+  while (data_size--)
+    {
+      crc = (crc >> 8) ^ crc32_table[(crc ^ *data) & 255];
+      data++;
+    }
+  return crc^0xFFFFFFFF;
+}
+
+
+uint16_t crc16(uint8_t *data, uint32_t data_size)
+{	
+	/*Table of CRC values for high order byte*/
+	static unsigned char auchCRCHi[]=
+	{
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
+			0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
+	};
+	/*Table of CRC values for low order byte*/
+	static char auchCRCLo[] =
+	{
+					0x00,0xC0,0xC1,0x01,0xC3,0x03,0x02,0xC2,0xC6,0x06,0x07,0xC7,0x05,0xC5,0xC4,0x04,
+					0xCC,0x0C,0x0D,0xCD,0x0F,0xCF,0xCE,0x0E,0x0A,0xCA,0xCB,0x0B,0xC9,0x09,0x08,0xC8,
+					0xD8,0x18,0x19,0xD9,0x1B,0xDB,0xDA,0x1A,0x1E,0xDE,0xDF,0x1F,0xDD,0x1D,0x1C,0xDC,
+					0x14,0xD4,0xD5,0x15,0xD7,0x17,0x16,0xD6,0xD2,0x12,0x13,0xD3,0x11,0xD1,0xD0,0x10,
+					0xF0,0x30,0x31,0xF1,0x33,0xF3,0xF2,0x32,0x36,0xF6,0xF7,0x37,0xF5,0x35,0x34,0xF4,
+					0x3C,0xFC,0xFD,0x3D,0xFF,0x3F,0x3E,0xFE,0xFA,0x3A,0x3B,0xFB,0x39,0xF9,0xF8,0x38,
+					0x28,0xE8,0xE9,0x29,0xEB,0x2B,0x2A,0xEA,0xEE,0x2E,0x2F,0xEF,0x2D,0xED,0xEC,0x2C,
+					0xE4,0x24,0x25,0xE5,0x27,0xE7,0xE6,0x26,0x22,0xE2,0xE3,0x23,0xE1,0x21,0x20,0xE0,
+					0xA0,0x60,0x61,0xA1,0x63,0xA3,0xA2,0x62,0x66,0xA6,0xA7,0x67,0xA5,0x65,0x64,0xA4,
+					0x6C,0xAC,0xAD,0x6D,0xAF,0x6F,0x6E,0xAE,0xAA,0x6A,0x6B,0xAB,0x69,0xA9,0xA8,0x68,
+					0x78,0xB8,0xB9,0x79,0xBB,0x7B,0x7A,0xBA,0xBE,0x7E,0x7F,0xBF,0x7D,0xBD,0xBC,0x7C,
+					0xB4,0x74,0x75,0xB5,0x77,0xB7,0xB6,0x76,0x72,0xB2,0xB3,0x73,0xB1,0x71,0x70,0xB0,
+					0x50,0x90,0x91,0x51,0x93,0x53,0x52,0x92,0x96,0x56,0x57,0x97,0x55,0x95,0x94,0x54,
+					0x9C,0x5C,0x5D,0x9D,0x5F,0x9F,0x9E,0x5E,0x5A,0x9A,0x9B,0x5B,0x99,0x59,0x58,0x98,
+					0x88,0x48,0x49,0x89,0x4B,0x8B,0x8A,0x4A,0x4E,0x8E,0x8F,0x4F,0x8D,0x4D,0x4C,0x8C,
+					0x44,0x84,0x85,0x45,0x87,0x47,0x46,0x86,0x82,0x42,0x43,0x83,0x41,0x81,0x80,0x40,
+			};
+	uchCRCHi = 0xFF;  
+  uchCRCLo = 0xFF;   
+    /* CRC Generation Function */
+  while( data_size--) /* pass through message buffer */
+  {
+    uIndex = uchCRCHi ^ *data++; /* calculate the CRC */
+    uchCRCHi = uchCRCLo ^ auchCRCHi[uIndex];
+		uchCRCLo = auchCRCLo[uIndex];
+  }
+	return uchCRCHi | uchCRCLo<<8;
+} 

diode_tester/Core/Interfaces/crc_algs.h

@@ -0,0 +1,9 @@
+#include "mylibs_include.h"
+
+// extern here to use in bootloader.c
+extern uint32_t CRC_calc;
+extern uint32_t CRC_ref;
+
+
+uint16_t crc16(uint8_t *data, uint32_t data_size);
+uint32_t crc32(uint8_t *data, uint32_t data_size);

diode_tester/Core/Interfaces/interface_config.h

@@ -0,0 +1,70 @@
+/**
+**************************************************************************
+* @file interface_config.h
+* @brief Конфигурации для интерфейсов
+**************************************************************************
+  * @defgroup    INTERFACE_CONFIGS     Configs for interfaces
+  * @brief       Конфигурации для интерфейсов
+  * @details     
+	@{
+*************************************************************************/
+#ifndef _INTERFACE_CONFIG_H_
+#define _INTERFACE_CONFIG_H_
+
+/** 
+	* @addtogroup 		MODBUS_CONFIG   Конфигурации для модбас
+	* @ingroup        INTERFACE_CONFIGS
+	* @ingroup        MODBUS
+	@{
+	*/
+
+#define MODBUS_VENDOR_NAME            "NIO-12"
+#define MODBUS_PRODUCT_CODE           "12345"
+#define MODBUS_REVISION               "Ver. 1.0"
+#define MODBUS_VENDOR_URL             "https://git.arktika.cyou/Andrey/Diod_Test"
+#define MODBUS_PRODUCT_NAME           "Diode Tester"
+#define MODBUS_MODEL_NAME             "STM32F103"
+#define MODBUS_USER_APPLICATION_NAME  "diode_tester"
+
+//#define MODBUS_UART_NUMB 							1							///< Номер используемого UART, по нему выставляется дефайн USED_MB_UART = USARTx
+#define MODBUS_SPEED									115200			  ///< Скорость UART для модбас
+//#define MODBUS_GPIOX									GPIOA					///< Порт для UART RX/TX
+//#define MODBUS_GPIO_PIN_RX						GPIO_PIN_9		///< Пин для UART RX
+//#define MODBUS_GPIO_PIN_TX						GPIO_PIN_10		///< Пин для UART TX
+
+//#define MODBUS_TIM_NUMB 							2							///< number of used tim, accord to this define sets define USED_MB_TIM = TIMx 
+//#define MODBUS_TIM_AHB_FREQ						72						///< TIM AHB Bus Freq
+
+// defines for modbus behaviour 
+#define MODBUS_DEVICE_ID 							1			///< девайс текущего устройства
+//#define MODBUS_MAX_TIMEOUT 						500 	///< максимальнйы тайтаут MB is ms
+
+
+#define RS_UART_Init                  MX_USART1_UART_Init
+#define RS_UART_DeInit                HAL_UART_MspDeInit
+#define RS_TIM_Init                   MX_TIM2_Init
+#define RS_TIM_DeInit                 HAL_TIM_Base_MspDeInit
+#define rs_huart                      huart1
+#define rs_htim                       htim2
+/**
+  * @brief    Поменять комманды 0x03 и 0x04 местами (для LabView терминалки от двигателей)
+  * @details  Терминалка от двигателей использует для чтения регистров комманду R_HOLD_REGS вместо R_IN_REGS
+  *           Поэтому чтобы считывать Input Regs - надо поменять их местами.
+  */
+//#define MODBUS_SWITCH_COMMAND_R_IN_REGS_AND_R_HOLD_REGS
+
+/////////////////////////////////////////////////////////////////////
+/////////////////////////---CALC DEFINES---//////////////////////////
+
+/** MODBUS_CONFIG
+  * @}
+  */
+
+
+  
+  
+/** INTERFACE_CONFIGS
+  * @}
+  */
+
+#endif //_INTERFACE_CONFIG_H_

diode_tester/Core/Interfaces/modbus.h

@@ -0,0 +1,357 @@
+/** 
+	**************************************************************************
+	* @file 	modbus.h
+	* @brief 	Заголовочный файл модуля MODBUS.
+	* @details 	Данный файл необходимо подключить в rs_message.h. После подключать 
+	* rs_message.h к основному проекту.
+	* 
+	* @defgroup MODBUS
+	* @brief 		Modbus stuff
+	*
+	*************************************************************************/
+#ifndef __MODBUS_H_
+#define __MODBUS_H_
+ 
+#include "mylibs_include.h"
+#include "modbus_data.h"
+//#include "settings.h"		// for modbus settings
+
+/** 
+	* @addtogroup MODBUS_SETTINGS
+	* @ingroup 		MODBUS
+	* @brief 			Some defines for modbus
+	@{
+	*/
+/////////////////////////////////////////////////////////////////////
+//////////////////////////---SETTINGS---/////////////////////////////
+// USER SETTINGS FOR MODBUS IN interface_config.h
+//////////////////////////---SETTINGS---/////////////////////////////
+
+
+/////////////////////////////////////////////////////////////////////
+/////////////////////---USER MESSAGE DEFINES---//////////////////////
+//-------------DEFINES FOR STRUCTURE----------------
+/* defines for structure of modbus message */
+#define MbAddr_SIZE 						1						///< size of (MbAddr)
+#define Func_Code_SIZE					1						///< size of (Func_Code)
+#define	Addr_SIZE								2						///< size of (Addr)
+#define Qnt_SIZE								2						///< size of (Qnt)
+#define ByteCnt_SIZE						1						///< size of (ByteCnt)
+#define DATA_SIZE 							125 				///< maximum number of data: DWORD (NOT MESSAGE SIZE)
+#define CRC_SIZE 								2 					///< size of (MB_CRC) in bytes
+
+/** @brief Size of whole message */
+#define INFO_SIZE_MAX 					(MbAddr_SIZE+Func_Code_SIZE+Addr_SIZE+Qnt_SIZE+ByteCnt_SIZE)
+
+/** @brief Size of first part of message that will be received
+first receive info part of message, than defines size of rest message*/
+#define RX_FIRST_PART_SIZE			INFO_SIZE_MAX
+
+/** @brief Size of buffer: max size of whole message */
+#define MSG_SIZE_MAX 						(INFO_SIZE_MAX + DATA_SIZE*2 + CRC_SIZE) // max possible size of message
+
+/** @brief Structure for modbus exception codes */
+typedef enum //MB_ExceptionTypeDef
+{
+	// reading
+	NO_ERRORS                 = 0x00,		///< no errors
+	ILLEGAL_FUNCTION          = 0x01,		///< Принятый код функции не может быть обработан
+	ILLEGAL_DATA_ADDRESS      = 0x02,		///< Адрес данных, указанный в запросе, недоступен
+	ILLEGAL_DATA_VALUE        = 0x03,		///< Значение, содержащееся в поле данных запроса, является недопустимой величиной
+	SLAVE_DEVICE_FAILURE      = 0x04,		///< Невосстанавливаемая ошибка имела место, пока ведомое устройство пыталось выполнить затребованное действие
+//	ACKNOWLEDGE =						0x05,		///< idk
+//	SLAVE_DEVICE_BUSY =			0x06,		///< idk
+//	MEMORY_PARITY_ERROR =		0x08,		///< idk
+}MB_ExceptionTypeDef;
+
+#define ERR_VALUES_START				0x80U				///< from this value starts error func codes
+/** @brief Structure for modbus func codes */
+typedef enum //MB_FunctonTypeDef
+{
+  /* COMMANDS */
+	// reading
+	MB_R_COILS            = 0x01,			///< Чтение битовых ячеек
+	MB_R_DISC_IN          = 0x02,		  ///< Чтение дискретных входов
+#ifndef MODBUS_SWITCH_COMMAND_R_IN_REGS_AND_R_HOLD_REGS
+	MB_R_HOLD_REGS        = 0x03,			///< Чтение входных регистров
+	MB_R_IN_REGS          = 0x04,			///< Чтение регистров хранения
+#else
+	MB_R_HOLD_REGS        = 0x04,			///< Чтение входных регистров
+	MB_R_IN_REGS          = 0x03,			///< Чтение регистров хранения
+#endif
+	
+	// writting
+	MB_W_COIL             = 0x05,			///< Запись битовой ячейки
+	MB_W_HOLD_REG         = 0x06,			///< Запись одиночного регистра
+	MB_W_COILS            = 0x0F,			///< Запись нескольких битовых ячеек
+	MB_W_HOLD_REGS        = 0x10,			///< Запись нескольких регистров
+  
+  MB_R_DEVICE_INFO      = 0x2B,			///< Чтения информации об устройстве
+  
+  /* ERRORS */
+	// error reading
+	MB_ERR_R_COILS        = MB_R_COILS + ERR_VALUES_START,			  ///< Ошибка чтения битовых ячеек
+	MB_ERR_R_DISC_IN      = MB_R_DISC_IN + ERR_VALUES_START,	    ///< Ошибка чтения дискретных входов
+	MB_ERR_R_IN_REGS      = MB_R_IN_REGS + ERR_VALUES_START,			///< Ошибка чтения регистров хранения
+	MB_ERR_R_HOLD_REGS    = MB_R_HOLD_REGS + ERR_VALUES_START,		///< Ошибка чтения входных регистров
+	
+	// error writting
+	MB_ERR_W_COIL         = MB_W_COIL + ERR_VALUES_START,			    ///< Ошибка записи битовой ячейки
+	MB_ERR_W_HOLD_REG     = MB_W_HOLD_REG + ERR_VALUES_START,			///< Ошибка записи одиночного регистра
+	MB_ERR_W_COILS        = MB_W_COILS + ERR_VALUES_START,			  ///< Ошибка записи нескольких битовых ячеек
+	MB_ERR_W_HOLD_REGS    = MB_W_HOLD_REGS + ERR_VALUES_START,	  ///< Ошибка записи нескольких регистров
+}MB_FunctonTypeDef;
+
+/** @brief Structure for MEI func codes */
+typedef enum //MB_FunctonTypeDef
+{
+  MEI_DEVICE_IDENTIFICATION = 0x0E,
+}MB_MEITypeDef;
+
+/** @brief Structure for MEI func codes */
+typedef enum //MB_FunctonTypeDef
+{
+  MB_BASIC_IDENTIFICATION = 0x01,
+  MB_REGULAR_IDENTIFICATION = 0x02,
+  
+  
+  /* ERRORS */  
+  MB_ERR_BASIC_IDENTIFICATION = MB_BASIC_IDENTIFICATION + ERR_VALUES_START,
+  MB_ERR_REGULAR_IDENTIFICATION = MB_REGULAR_IDENTIFICATION + ERR_VALUES_START,
+}MB_ConformityTypeDef;
+
+/** @brief Structure for decive identification message type */
+typedef struct
+{
+	MB_MEITypeDef 		        MEI_Type;			  ///< MEI Type assigned number for Device Identification Interface
+  MB_ConformityTypeDef      ReadDevId;
+  MB_ConformityTypeDef      Conformity;
+  uint8_t                   MoreFollows;    ///< in this library always a zero
+  uint8_t                   NextObjId;
+  uint8_t                   NumbOfObj;  
+}MB_DevIdMsgTypeDef;
+
+/** @brief Structure for modbus messsage */
+typedef struct 	// RS_MsgTypeDef
+{
+	uint8_t 							MbAddr;							///< Modbus Slave Address
+	MB_FunctonTypeDef 		Func_Code;					///< Modbus Function Code
+  MB_DevIdMsgTypeDef    DevId;              ///< Read Device Identification Header struct
+	uint16_t 							Addr;								///< Modbus Address of data
+	uint16_t 							Qnt;								///< Quantity of modbus data
+	uint8_t 							ByteCnt;						///< Quantity of bytes of data in message to transmit/receive
+	
+	uint16_t 							DATA[DATA_SIZE];		///< Modbus Data
+	MB_ExceptionTypeDef		Except_Code;				///< Exception Code for the command
+	
+	uint16_t 							MB_CRC;							///< Modbus CRC
+}RS_MsgTypeDef;
+//--------------------------------------------------
+extern RS_MsgTypeDef MODBUS_MSG;
+/////////////////////---MODBUS USER SETTINGS---//////////////////////
+
+/** MODBUS_SETTINGS
+  * @} 
+  */
+
+
+/////////////////////////////////////////////////////////////////////
+////////////////////---MODBUS MESSAGE DEFINES---/////////////////////
+/** 
+	* @addtogroup MODBUS_MESSAGE_DEFINES
+	* @ingroup 		MODBUS
+	* @brief 			Some defines for modbus
+	@{
+	*/
+/** @brief Structure for coils operation */
+typedef enum
+{
+	SET_COIL,
+	RESET_COIL,
+	TOOGLE_COIL,
+}MB_CoilsOpTypeDef;
+
+//--------------------------------------------------
+
+/** 
+	* @brief 	Macros to set pointer to 16-bit array
+	* @param 	_arr_ 				- массив регистров (16-бит).
+	*/
+#define MB_Set_Arr16_Ptr(_arr_)												((uint16_t*)(&(_arr_)))
+/** 
+	* @brief 	Macros to set pointer to register
+	* @param 	_parr_ 				- массив регистров.
+	* @param 	_addr_ 				- Номер регистра (его индекс) от начала массива _arr_.
+	*/
+#define MB_Set_Register_Ptr(_parr_, _addr_)						((uint16_t *)(_parr_)+(_addr_))
+
+/** 
+	* @brief 	Macros to set pointer to a certain register that contains certain coil
+	* @param 	_parr_ 				- массив коилов.
+	* @param 	_coil_ 				- Номер коила от начала массива _arr_.
+	*	@note		Используется вместе с @ref MB_Set_Coil_Mask
+	@verbatim	Пояснение выражений
+						(_coil_/16) - get index (address shift) of register that contain certain coil
+	Visual explanation: 30th coil in coils registers array
+	xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxCx
+	|register[0]----|	|register[1]----|
+	|skip this------|	|get this-------|
+										|shift to 14 bit|
+	@endverbatim
+	*/
+#define MB_Set_Coil_Reg_Ptr(_parr_, _coil_)						((uint16_t *)(_parr_)+((_coil_)/16))
+/** 
+	* @brief 	Macros to set mask to a certain bit in coils register
+	* @param 	_coil_ 				- Номер коила от начала массива _arr_.
+	*	@note		Используется вместе с @ref MB_Set_Coil_Reg_Ptr
+	@verbatim	Пояснение выражений
+						(16*(_coil_/16) - how many coils we need to skip. e.g. (16*30/16) - skip 16 coils from first register
+						_coil_-(16*(_coil_/16)) - shift to certain coil in certain register
+					e.g. Coil(30) gets in register[1] (30/16 = 1) coil №14 (30 - (16*30/16) = 30 - 16 = 14)
+	
+	Visual explanation: 30th coil in coils registers array
+	xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxCx
+	|register[0]----|	|register[1]----|
+	|skip this------|	|get this-------|
+										|shift to 14 bit|
+	@endverbatim
+	*/
+#define MB_Set_Coil_Mask(_coil_)											(1 << ( _coil_ - (16*((_coil_)/16)) ))
+	
+/** 
+	* @brief 	Read Coil at its local address.
+	* @param 	_parr_ 				- массив коилов.
+	* @param 	_coil_ 				- Номер коила от начала массива _arr_.
+	* @return uint16_t			- Возвращает запрошенный коил на 0м бите.
+	*
+  * @details 	Позволяет обратиться к коилу по адресу относительно _arr_.
+	*/
+#define MB_Read_Coil_Local(_parr_, _coil_)					((	*MB_Set_Coil_Reg_Ptr(_parr_, _coil_)	&		MB_Set_Coil_Mask(_coil_) ) >> (_coil_))
+/** 
+	* @brief 	Set Coil at its local address.
+	* @param 	_parr_ 				- указатель на массив коилов.
+	* @param 	_coil_ 				- Номер коила от начала массива _arr_.
+	*	
+  * @details 	Позволяет обратиться к коилу по адресу относительно _arr_.
+	*/
+#define	MB_Set_Coil_Local(_parr_, _coil_)							*MB_Set_Coil_Reg_Ptr(_parr_, _coil_) 	|= 	MB_Set_Coil_Mask(_coil_)
+/** 
+	* @brief 	Reset Coil at its local address.
+	* @param 	_parr_ 				- указатель на массив коилов.
+	* @param 	_coil_ 				- Номер коила от начала массива _arr_.
+	*
+  * @details 	Позволяет обратиться к коилу по адресу относительно _arr_.
+	*/
+#define MB_Reset_Coil_Local(_parr_, _coil_)						*MB_Set_Coil_Reg_Ptr(_parr_, _coil_) 	&= ~(MB_Set_Coil_Mask(_coil_))
+/** 
+	* @brief 	Set Coil at its local address.
+	* @param 	_parr_ 				- указатель на массив коилов.
+	* @param 	_coil_ 				- Номер коила от начала массива _arr_.
+	*	
+  * @details 	Позволяет обратиться к коилу по адресу относительно _arr_.
+	*/
+#define	MB_Toogle_Coil_Local(_parr_, _coil_)					*MB_Set_Coil_Reg_Ptr(_parr_, _coil_) 	^= 	MB_Set_Coil_Mask(_coil_)
+//--------------------------------------------------
+
+
+//------------------OTHER DEFINES-------------------
+#define RegisterType_Holding				0
+#define RegisterType_Input					1
+#define RegisterType_Discrete				2
+// create hadnles and settings for uart, tim, rs with _modbus_ name
+#define CONCAT(a,b) a##b
+#define Create_MODBUS_Handles(_modbus_)												\
+				UART_SettingsTypeDef CONCAT(_modbus_, _suart);				\
+				UART_HandleTypeDef CONCAT(_modbus_, _huart);					\
+				TIM_SettingsTypeDef CONCAT(_modbus_, _stim);					\
+				TIM_HandleTypeDef CONCAT(_modbus_, _htim);						\
+				RS_HandleTypeDef CONCAT(h, _modbus_)	
+//--------------------------------------------------
+/** GENERAL_MODBUS_STUFF
+  * @} 
+  */
+////////////////////---MODBUS MESSAGE DEFINES---/////////////////////
+
+
+
+/////////////////////////////////////////////////////////////////////
+/////////////////////////---FUNCTIONS---/////////////////////////////
+/** 
+	* @addtogroup MODBUS_FUNCTIONS
+	* @ingroup 		MODBUS
+	* @brief 			Function for controling modbus communication
+	*/
+	
+//----------------FUNCTIONS FOR USER----------------
+/** 
+	* @addtogroup MODBUS_DATA_ACCESS_FUNCTIONS
+	* @ingroup 		MODBUS_FUNCTIONS
+	* @brief 			Function for user use
+	@{
+	*/
+/* First set up of MODBUS */
+void MODBUS_FirstInit(void);
+/* Set or Reset Coil at its global address */
+MB_ExceptionTypeDef MB_Write_Coil_Global(uint16_t Addr, MB_CoilsOpTypeDef WriteVal);
+/* Read Coil at its global address */
+uint16_t MB_Read_Coil_Global(uint16_t Addr, MB_ExceptionTypeDef *Exception);
+
+/** MODBUS_DATA_ACCESS_FUNCTIONS
+  * @} 
+  */
+	
+//---------PROCESS MODBUS COMMAND FUNCTIONS---------
+/** 
+	* @addtogroup MODBUS_CMD_PROCESS_FUNCTIONS
+	* @ingroup 		MODBUS_FUNCTIONS
+	* @brief 			Function process commands
+	@{
+	*/
+/* Check is address valid for certain array */
+MB_ExceptionTypeDef MB_Check_Address_For_Arr(uint16_t Addr, uint16_t Qnt, uint16_t R_ARR_ADDR, uint16_t R_ARR_NUMB);
+/* Define Address Origin for Input/Holding Registers */
+MB_ExceptionTypeDef MB_DefineRegistersAddress(uint16_t **pRegs, uint16_t Addr, uint16_t Qnt, uint8_t RegisterType);
+/* Define Address Origin for coils */
+MB_ExceptionTypeDef MB_DefineCoilsAddress(uint16_t **pCoils, uint16_t Addr, uint16_t Qnt, uint16_t *start_shift, uint8_t WriteFlag);
+/* Proccess command Read Coils (01 - 0x01) */
+uint8_t MB_Read_Coils(RS_MsgTypeDef *modbus_msg);
+/* Proccess command Read Holding Registers (03 - 0x03) */
+uint8_t MB_Read_Hold_Regs(RS_MsgTypeDef *modbus_msg);
+/* Proccess command Read Input Registers (04 - 0x04) */
+uint8_t MB_Read_Input_Regs(RS_MsgTypeDef *modbus_msg);
+/* 	Proccess command Write Single Coils (05 - 0x05) */
+uint8_t MB_Write_Single_Coil(RS_MsgTypeDef *modbus_msg);
+/* Proccess command Write Multiple Coils (15 - 0x0F) */
+uint8_t MB_Write_Miltuple_Coils(RS_MsgTypeDef *modbus_msg);
+/* Proccess command Write Multiple Register (16 - 0x10) */
+uint8_t MB_Write_Miltuple_Regs(RS_MsgTypeDef *modbus_msg);
+
+/** MODBUS_DATA_ACCESS_FUNCTIONS
+  * @} 
+  */
+/////////////////////////---FUNCTIONS---/////////////////////////////
+	
+	
+	
+/////////////////////////////////////////////////////////////////////
+/////////////////////////---CALC DEFINES---//////////////////////////
+
+
+// TRACES DEFINES
+#ifndef Trace_MB_UART_Enter
+#define Trace_MB_UART_Enter()
+#endif //Trace_MB_UART_Enter
+	
+#ifndef Trace_MB_UART_Exit
+#define Trace_MB_UART_Exit()
+#endif //Trace_MB_UART_Exit
+
+#ifndef Trace_MB_TIM_Enter
+#define Trace_MB_TIM_Enter()
+#endif //Trace_MB_TIM_Enter
+	
+#ifndef Trace_MB_TIM_Exit
+#define Trace_MB_TIM_Exit()
+#endif //Trace_MB_TIM_Exit
+
+#endif //__MODBUS_H_

diode_tester/Core/Interfaces/modbus_data.h

@@ -0,0 +1,173 @@
+/** 
+**************************************************************************
+* @file   modbus_data.h
+* @brief    Заголовочный файл с описанием даты MODBUS.
+* @details  Данный файл необходимо подключается в rs_message.h. После rs_message.h 
+* подключается к основному проекту.
+* 
+* @defgroup MODBUS_DATA
+* @ingroup  MODBUS
+* @brief    Modbus data description
+*
+*************************************************************************/
+
+#ifndef _MODBUS_DATA_H_
+#define _MODBUS_DATA_H_
+  
+#include "stdint.h"
+//--------------DEFINES FOR REGISTERS---------------
+// DEFINES FOR ARRAYS
+/** 
+  * @addtogroup MODBUS_DATA_RERISTERS_DEFINES
+  * @ingroup    MODBUS_DATA
+  * @brief      Defines for registers
+  Структура дефайна адресов
+  @verbatim    
+  Для массивов регистров:
+    R_<NAME_ARRAY>_ADDR   -  модбас адресс первого регистра в массиве
+    R_<NAME_ARRAY>_QNT    -  количество регистров в массиве
+  
+  @endverbatim
+  * @{
+  */
+  
+  
+/** 
+  * @brief Регистры хранения
+  */
+typedef struct //MB_DataInRegsTypeDef
+{
+  uint16_t ForwardVoltage;
+  uint16_t ReversePeakVoltage;
+}MB_DataInRegsTypeDef;
+
+
+/** 
+  * @brief Входные регистры 
+  */
+typedef struct //MB_DataInRegsTypeDef
+{
+  uint16_t TimeForForward;
+  uint16_t TimeForReverse;
+  uint16_t TimeBeforeTest;
+  uint16_t TimeDeadtime;
+  uint16_t TimeBeforePeak;
+  
+  uint16_t Adc_PulseWidth;
+  uint16_t Adc_PulseSign;
+  uint16_t Adc_CalibrValue;
+  uint16_t Adc_ZeroValue;
+  uint16_t Adc_U_Calibr;
+}MB_DataHoldRegsTypeDef;
+
+
+// DEFINES FOR INPUT REGISTERS ARRAYS
+#define   R_MEASURED_ADDR                 0
+#define   R_MEASURED_QNT                  2
+
+// DEFINES FOR HOLDING REGISTERS ARRAYS
+#define   R_SETTINGS_ADDR                   0
+#define   R_SETTINGS_QNT                    10
+
+
+// DEFINES FOR REGISTERS LOCAL ADDRESSES
+//#define R_SET_ERROR(_te_num_)          0
+
+ 
+/** MODBUS_DATA_RERISTERS_DEFINES
+  * @} 
+  */
+
+//----------------DEFINES FOR COILS-----------------
+/** 
+  * @addtogroup MODBUS_DATA_COILS_DEFINES
+  * @ingroup    MODBUS_DATA
+  * @brief      Defines for coils
+  @verbatim    
+  Структура дефайна
+  Для массивов коилов:
+    C_<NAME_ARRAY>_ADDR   - модбас адресс первого коила в массиве
+    C_<NAME_ARRAY>_QNT    - количество коилов в массиве (минимум 16)
+
+  @endverbatim
+  * @{
+  */
+  
+  
+  
+/** 
+  * @brief     Коилы
+  */
+typedef struct //MB_DataCoilsTypeDef
+{
+  /* reg 1 - control */
+  unsigned ForwardTest:1;
+  unsigned ReverseTest:1;
+  unsigned StartTest:1;
+  unsigned KeyForwardHiTest:1;
+  unsigned KeyForwardLoTest:1;
+  unsigned KeyReverseHiTest:1;
+  unsigned KeyReverseLoTest:1;
+  
+  unsigned reserved:9;
+  
+  /* reg 2 - settings */
+  unsigned msTimeForForward_enable:1;
+  unsigned msTimeForReverse_enable:1;  
+  unsigned msTimeBeforeTest_enable:1;
+  unsigned msTimeDeadtime_enable:1;
+  unsigned msTimeBeforePeak_enable:1;
+  unsigned reserved2:11;
+}MB_DataCoilsTypeDef;
+
+// DEFINES FOR COIL ARRAYS
+#define C_CONTROL_ADDR                0
+#define C_CONTROL_QNT                 7
+
+#define C_SETTINGS_ADDR               16
+#define C_SETTINGS_QNT                5
+
+/** MODBUS_DATA_COILS_DEFINES
+  * @} 
+  */
+  
+  
+//-----------MODBUS DEVICE DATA SETTING-------------
+// MODBUS DATA STRUCTTURE
+/** 
+  * @brief Структура со всеми регистрами и коилами модбас 
+  * @ingroup  MODBUS_DATA
+  */
+typedef struct // tester modbus data
+{
+  MB_DataInRegsTypeDef      InRegs;     ///< Modbus input registers @ref MB_DataInRegsTypeDef
+
+  MB_DataCoilsTypeDef       Coils;      ///< Modbus coils @ref MB_DataCoilsTypeDef
+  
+  MB_DataHoldRegsTypeDef    HoldRegs;   ///< Modbus holding registers @ref MB_DataHoldRegsTypeDef
+}MB_DataStructureTypeDef;
+extern MB_DataStructureTypeDef MB_DATA;
+
+
+typedef struct
+{
+  unsigned  length;
+  char      *name;
+}MB_DeviceObjectTypeDef;
+typedef struct
+{
+  MB_DeviceObjectTypeDef VendorName;
+  MB_DeviceObjectTypeDef ProductCode;
+  MB_DeviceObjectTypeDef Revision;
+  MB_DeviceObjectTypeDef VendorUrl;
+  MB_DeviceObjectTypeDef ProductName;
+  MB_DeviceObjectTypeDef ModelName;
+  MB_DeviceObjectTypeDef UserApplicationName;
+}MB_DeviceIdentificationTypeDef;
+void MB_DevoceInentificationInit(void);
+
+
+#endif //_MODBUS_DATA_H_
+
+/////////////////////////////////////////////////////////////
+///////////////////////TEMP/OUTDATE/OTHER////////////////////

diode_tester/Core/Interfaces/rs_message.c

@@ -0,0 +1,598 @@
+/** 
+**************************************************************************
+* @file rs_message.c
+* @brief Модуль для реализации протоколов по RS/UART.
+**************************************************************************
+  @verbatim
+  //-------------------Функции-------------------//
+  Functions: users
+    -	RS_Parse_Message/RS_Collect_Message	Заполнение структуры сообщения и буфера
+    -	RS_Response  									Ответ на сообщение
+    - RS_Define_Size_of_RX_Message	Определение размера принимаемых данных
+  
+  Functions: general
+    -	RS_Receive_IT									Ожидание комманды и ответ на неё
+    -	RS_Transmit_IT								Отправление комманды и ожидание ответа
+    -	RS_Init												Инициализация переферии и структуры для RS
+    -	RS_ReInit_UART								Реинициализация UART для RS
+    -	RS_Abort											Отмена приема/передачи по ЮАРТ
+    -	RS_Init												Инициализация периферии и modbus handler
+  
+  Functions: callback/handler
+    - RS_Handle_Receive_Start				Функция для запуска приема или остановки RS
+    - RS_Handle_Transmit_Start			Функция для запуска передачи или остановки RS
+    
+    -	RS_UART_RxCpltCallback				Коллбек при окончании приема или передачи
+      RS_UART_TxCpltCallback		
+      
+    - RS_UART_Handler								Обработчик прерывания для UART
+    - RS_TIM_Handler								Обработчик прерывания для TIM
+    
+  Functions: uart initialize (это было в отдельных файлах, мб надо обратно разнести)
+    - UART_Base_Init							Инициализация UART для RS
+    - RS_UART_GPIO_Init						Инициализация GPIO для RS
+    - UART_DMA_Init								Инициализация DMA для RS
+    - UART_MspInit								Аналог HAL_MspInit для RS
+    - UART_MspDeInit							Аналог HAL_MspDeInit для RS
+  
+  @endverbatim
+*************************************************************************/
+#include "rs_message.h"
+
+uint8_t RS_Buffer[MSG_SIZE_MAX]; // uart buffer
+
+#ifndef INCLUDE_GENERAL_PERIPH_LIBS
+extern void RS_UART_Init(void);
+extern void RS_UART_DeInit(UART_HandleTypeDef *huart);
+extern void RS_TIM_Init(void);
+extern void RS_TIM_DeInit(TIM_HandleTypeDef *htim);
+#endif 
+
+//-------------------------------------------------------------------
+//-------------------------GENERAL FUNCTIONS-------------------------
+/**
+  * @brief 	Start receive IT.
+  * @param 	hRS 		- указатель на хендлер RS.
+  * @param 	RS_msg 	- указатель на структуру сообщения.
+  * @return RS_RES	- статус о состоянии RS после инициализации приема.
+	*/
+RS_StatusTypeDef RS_Receive_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
+{
+	RS_StatusTypeDef RS_RES = 0;
+	HAL_StatusTypeDef uart_res = 0;
+	
+	//-------------CHECK RS LINE----------------
+	// check that receive isnt busy
+	if( RS_Is_RX_Busy(hRS) ) // if tx busy - return busy status
+		return RS_BUSY;	
+	
+	//-----------INITIALIZE RECEIVE-------------
+	// if all OK: start receiving
+	RS_EnableReceive();
+	RS_Set_Busy(hRS);							// set RS busy	
+	RS_Set_RX_Flags(hRS);					// initialize flags for receive
+	hRS->pMessagePtr = RS_msg; 		// set pointer to message structire for filling it from UARTHandler fucntions
+	
+	// start receiving
+	uart_res = HAL_UART_Receive_IT(hRS->huart, hRS->pBufferPtr, RX_FIRST_PART_SIZE); // receive until ByteCnt+1 byte, 
+	// then in Callback restart receive for rest bytes	
+	
+	// if receive isnt started - abort RS
+	if(uart_res != HAL_OK)
+	{
+		RS_RES = RS_Abort(hRS, ABORT_RS);
+    printf_rs_err("\n%d: Error RS: Failed to start RS receiving...", uwTick);
+    TrackerCnt_Err(hRS->rs_err);
+	}
+	else
+  {
+		RS_RES = RS_OK;
+    printf_rs("\n%d: RS: Start Receiving...", uwTick);
+    TrackerCnt_Ok(hRS->rs_err);
+  }
+	
+	hRS->RS_STATUS = RS_RES;
+	return RS_RES; // returns result of receive init	
+}
+
+/**
+  * @brief 	Start transmit IT.
+  * @param 	hRS 		- указатель на хендлер RS.
+  * @param 	RS_msg 	- указатель на структуру сообщения.
+  * @return RS_RES	- статус о состоянии RS после инициализации передачи.
+	*/
+RS_StatusTypeDef RS_Transmit_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
+{	
+	RS_StatusTypeDef RS_RES = 0;
+	HAL_StatusTypeDef uart_res = 0;
+	
+	//-------------CHECK RS LINE----------------
+	// check that transmit isnt busy
+	if( RS_Is_TX_Busy(hRS) ) // if tx busy - return busy status
+		return RS_BUSY;
+		// check receive line
+
+	
+	//------------COLLECT MESSAGE---------------
+	RS_RES = RS_Collect_Message(hRS, RS_msg, hRS->pBufferPtr);
+	if (RS_RES != RS_OK) // if message isnt collect - stop RS and return error in RS_RES
+	{// need collect message status, so doesnt write abort to RS_RES
+		RS_Abort(hRS, ABORT_RS);
+		RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);	// restart receive
+	}
+	else // if collect successful
+	{
+		
+		//----------INITIALIZE TRANSMIT-------------
+    RS_EnableTransmit();
+//    for(int i = 0; i < hRS->sRS_Timeout; i++);
+    
+		RS_Set_Busy(hRS);							// set RS busy
+		RS_Set_TX_Flags(hRS);					// initialize flags for transmit IT
+		hRS->pMessagePtr = RS_msg; 		// set pointer for filling given structure from UARTHandler fucntion
+
+		// if all OK: start transmitting
+		uart_res = HAL_UART_Transmit_IT(hRS->huart, hRS->pBufferPtr, hRS->RS_Message_Size); 
+		// if transmit isnt started - abort RS
+		if(uart_res != HAL_OK)
+		{
+			RS_RES = RS_Abort(hRS, ABORT_RS);
+      printf_rs_err("\n%d: Error RS: Failed to start RS transmitting...", uwTick);
+      TrackerCnt_Err(hRS->rs_err);
+    }
+    else
+    {
+      RS_RES = RS_OK;
+      printf_rs("\n%d: RS: Start Transmitting...", uwTick);
+      TrackerCnt_Ok(hRS->rs_err);
+    }
+  }
+	
+	
+	hRS->RS_STATUS = RS_RES;
+	return RS_RES; // returns result of transmit init 	
+}
+
+/** 
+	* @brief 	Initialize UART and handle RS stucture.
+	* @param 	hRS 					- указатель на хендлер RS.
+	* @param 	suart 				- указатель на структуру с настройками UART.
+	* @param 	stim 					- указатель на структуру с настройками таймера.
+	* @param 	pRS_BufferPtr - указатель на буффер для приема-передачи по UART. Если он NULL, то поставиться библиотечный буфер.
+	* @return RS_RES				- статус о состоянии RS после инициализации.
+	* @note		Инициализация перефирии и структуры для приема-передачи по RS.
+	*/
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart, TIM_SettingsTypeDef *stim, uint8_t *pRS_BufferPtr)
+#else
+RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_HandleTypeDef *huart, TIM_HandleTypeDef *htim, uint8_t *pRS_BufferPtr)
+#endif
+{
+	// check that hRS is defined
+	if (hRS == NULL)
+		return RS_ERR;
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+	// check that huart is defined
+	if ((suart->huart.Instance == NULL) || (suart->huart.Init.BaudRate == NULL)) 
+		return RS_ERR;
+#else
+	// check that huart is defined
+	if (huart == NULL) 
+		return RS_ERR;
+#endif
+	// init uart
+  
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+	UART_Base_Init(suart);
+	hRS->huart = &suart->huart;
+#else
+//	RS_UART_Init();
+	hRS->huart = huart;
+#endif
+	
+	
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+	// check that timeout in interrupt needed
+	if (hRS->sRS_Timeout)
+	{
+		if (stim->htim.Instance == NULL) // check is timer defined
+			return RS_ERR;	
+					
+		// calc frequency corresponding to timeout and tims 1ms tickbase
+		stim->sTickBaseUS = TIM_TickBase_1MS;
+		stim->htim.Init.Period = hRS->sRS_Timeout;
+		
+		TIM_Base_Init(stim);
+		hRS->htim = &stim->htim;
+	}
+#else
+//	RS_TIM_Init();
+	hRS->htim = htim;
+#endif
+	
+	if (hRS->sRS_RX_Size_Mode == NULL)
+		return RS_ERR;
+	
+	// check that buffer is defined
+	if (hRS->pBufferPtr == NULL)
+	{
+		hRS->pBufferPtr = RS_Buffer; 		// if no - set default
+	}
+	else
+		hRS->pBufferPtr = pRS_BufferPtr; // if yes - set by user
+		
+	return RS_OK;
+}
+
+/** 
+	* @brief 	ReInitialize UART and RS receive.
+	* @param 	hRS 					- указатель на хендлер RS.
+	* @param 	suart 				- указатель на структуру с настройками UART.
+	* @return RS_RES				- статус о состоянии RS после инициализации.
+	* @note		Реинициализация UART и приема по RS.
+	*/
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart)
+#else
+HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_HandleTypeDef *huart)
+#endif
+{
+	HAL_StatusTypeDef RS_RES;
+	hRS->f.ReInit_UART = 0;
+	
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+	// check is settings are valid
+	if(Check_UART_Init_Struct(suart) != HAL_OK)
+		return HAL_ERROR;
+  
+	RS_Abort(hRS, ABORT_RS);
+  
+	UART_MspDeInit(&suart->huart);
+  
+	RS_RES = UART_Base_Init(suart);	
+	
+#else
+//	// check is settings are valid
+//	if(Check_UART_Init_Struct(suart) != HAL_OK)
+//		return HAL_ERROR;
+  
+	RS_Abort(hRS, ABORT_RS);
+  
+	RS_UART_DeInit(huart);
+  
+  RS_UART_Init();
+	
+#endif
+	
+	RS_Receive_IT(hRS, hRS->pMessagePtr);
+	return RS_RES;
+}
+
+
+/**
+	* @brief 	Abort RS/UART.
+	* @param 	hRS 				- указатель на хендлер RS.
+	* @param 	AbortMode 	- выбор, что надо отменить.
+							- ABORT_TX:		 Отмена передачи по ЮАРТ, с очищением флагов TX,
+							- ABORT_RX:		 Отмена приема по ЮАРТ, с очищением флагов RX,
+							- ABORT_RX_TX: Отмена приема и передачи по ЮАРТ,
+							- ABORT_RS: 	 Отмена приема-передачи RS, с очищением всей структуры.
+	* @return RS_RES			- статус о состоянии RS после аборта.
+	* @note		Отмена работы UART в целом или отмена приема/передачи RS. 
+						Также очищается хендл hRS.
+	*/
+RS_StatusTypeDef RS_Abort(RS_HandleTypeDef *hRS, RS_AbortTypeDef AbortMode)
+{
+	HAL_StatusTypeDef uart_res = 0;
+	hRS->htim->Instance->CNT = 0;
+	__HAL_TIM_CLEAR_IT(hRS->htim, TIM_IT_UPDATE);
+	
+	if(hRS->sRS_Timeout)								// if timeout setted
+		HAL_TIM_Base_Stop_IT(hRS->htim);	// stop timeout
+	
+	if((AbortMode&ABORT_RS) == 0x00)
+	{	
+		if((AbortMode&ABORT_RX) == ABORT_RX)
+		{
+			uart_res = HAL_UART_AbortReceive(hRS->huart); 	// abort receive
+			RS_Reset_RX_Flags(hRS);
+		}
+		
+		if((AbortMode&ABORT_TX) == ABORT_TX)
+		{
+			uart_res = HAL_UART_AbortTransmit(hRS->huart); 	// abort transmit
+			RS_Reset_TX_Flags(hRS);
+		}
+	}
+	else
+	{
+		uart_res = HAL_UART_Abort(hRS->huart);
+		RS_Clear_All(hRS);
+	}
+	hRS->RS_STATUS = RS_ABORTED;
+	return RS_ABORTED;
+}
+
+
+//-------------------------GENERAL FUNCTIONS-------------------------
+//-------------------------------------------------------------------
+
+
+
+//-------------------------------------------------------------------
+//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
+/**
+	* @brief 	Handle for starting receive.
+	* @param 	hRS 		- указатель на хендлер RS.
+	* @param 	RS_msg 	- указатель на структуру сообщения.
+	* @return RS_RES	- статус о состоянии RS после инициализации приема или окончания общения.
+	* @note		Определяет начинать прием команды/ответа или нет.
+	*/
+RS_StatusTypeDef RS_Handle_Receive_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
+{	
+	RS_StatusTypeDef RS_RES = 0;
+	
+	switch(hRS->sRS_Mode)
+	{
+		case SLAVE_ALWAYS_WAIT: 											// in slave mode with permanent waiting
+			RS_RES = RS_Receive_IT(hRS, RS_msg); break; // start receiving again
+		case SLAVE_TIMEOUT_WAIT:											// in slave mode with timeout waiting (start receiving cmd by request)
+			RS_Set_Free(hRS);	 RS_RES = RS_OK; break;		// end RS communication (set RS unbusy)
+	}
+  
+  if(RS_RES != RS_OK)
+  {
+    TrackerCnt_Err(hRS->rs_err);
+  }
+	
+	return RS_RES;
+}
+/**  
+	* @brief 	Handle for starting transmit.
+	* @param 	hRS 		- указатель на хендлер RS.
+	* @param 	RS_msg 	- указатель на структуру сообщения.
+	* @return RS_RES	- статус о состоянии RS после инициализации передачи.
+	* @note		Определяет отвечать ли на команду или нет.
+	*/
+RS_StatusTypeDef RS_Handle_Transmit_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
+{	
+	RS_StatusTypeDef RS_RES = 0;
+	
+	switch(hRS->sRS_Mode)
+	{
+		case SLAVE_ALWAYS_WAIT: 	// in slave mode always response
+		case SLAVE_TIMEOUT_WAIT:	// transmit response
+			RS_RES = RS_Transmit_IT(hRS, RS_msg); break; 
+	}
+  if(RS_RES != RS_OK)
+  {
+    TrackerCnt_Err(hRS->rs_err);
+  }
+  
+	return RS_RES;
+}
+
+/**  
+	* @brief 	UART RX Callback: define behaviour after receiving parts of message.
+	* @param 	hRS 		- указатель на хендлер RS.
+	* @return RS_RES	- статус о состоянии RS после обработки приема.
+	* @note		Контролирует прием сообщения: определяет размер принимаемой посылки и обрабатывает его.
+	*/
+RS_StatusTypeDef RS_UART_RxCpltCallback(RS_HandleTypeDef *hRS)
+{
+	RS_StatusTypeDef RS_RES = 0;
+	HAL_StatusTypeDef uart_res = 0;
+	
+	// if we had received bytes before ByteCnt
+	if((hRS->sRS_RX_Size_Mode == RS_RX_Size_NotConst) && (hRS->f.RX_Half == 0)) // if data size isnt constant and its first half, and
+	{	// First receive part of message, then define size of rest of message, and start receive it
+		hRS->f.RX_Half = 1;
+		//---------------FIND DATA SIZE-----------------
+		uint32_t NuRS_of_Rest_Bytes = 0xFFFF;
+		RS_RES = RS_Define_Size_of_RX_Message(hRS, &NuRS_of_Rest_Bytes);
+		
+		
+    // if we need to skip this message - restart receive
+		if(RS_RES == RS_SKIP || NuRS_of_Rest_Bytes == 0xFFFF)
+		{
+      TrackerCnt_Err(hRS->rs_err);
+			RS_Abort(hRS, ABORT_RX);
+			RS_RES = RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
+			return RS_RES;
+		}
+    
+		// if there is no bytes to receive
+    if(NuRS_of_Rest_Bytes == 0)
+    {
+      hRS->f.RX_Half = 0;
+
+      //---------PROCESS DATA & ENDING RECEIVING--------
+      RS_Set_RX_End(hRS);
+      
+      if(hRS->sRS_Timeout)								// if timeout setted
+        HAL_TIM_Base_Stop_IT(hRS->htim);	// stop timeout
+      
+      // parse received data
+      RS_RES = RS_Parse_Message(hRS, hRS->pMessagePtr, hRS->pBufferPtr); // parse message
+      
+      // RESPONSE
+      RS_RES = RS_Response(hRS, hRS->pMessagePtr);	
+      return RS_RES;
+    }
+    
+		
+		//-------------START UART RECEIVE---------------
+		uart_res = HAL_UART_Receive_IT(hRS->huart, (hRS->pBufferPtr + RX_FIRST_PART_SIZE), NuRS_of_Rest_Bytes); 
+		
+		if(uart_res != HAL_OK)
+		{// need uart status, so doesnt write abort to RS_RES
+      TrackerCnt_Err(hRS->rs_err);
+			RS_RES = RS_Abort(hRS, ABORT_RS);
+		}
+		else
+			RS_RES = RS_OK;
+	}	 
+	else // if we had received whole message
+	{
+		hRS->f.RX_Half = 0;
+
+		//---------PROCESS DATA & ENDING RECEIVING--------
+		RS_Set_RX_End(hRS);
+		
+		if(hRS->sRS_Timeout)								// if timeout setted
+			HAL_TIM_Base_Stop_IT(hRS->htim);	// stop timeout
+		
+		// parse received data
+		RS_RES = RS_Parse_Message(hRS, hRS->pMessagePtr, hRS->pBufferPtr); // parse message
+    
+		// RESPONSE
+		RS_RES = RS_Response(hRS, hRS->pMessagePtr);	
+	}
+	
+	return RS_RES;	
+}
+
+
+/**  
+	* @brief 	UART TX Callback: define behaviour after transmiting message.
+	* @param 	hRS 		- указатель на хендлер RS.
+	* @return RS_RES	- статус о состоянии RS после обработки приема.
+	* @note		Определяет поведение RS после передачи сообщения.
+	*/
+RS_StatusTypeDef RS_UART_TxCpltCallback(RS_HandleTypeDef *hRS)
+{
+	RS_StatusTypeDef RS_RES = RS_OK;
+	HAL_StatusTypeDef uart_res = 0;
+	
+	//--------------ENDING TRANSMITTING-------------
+	RS_Set_TX_End(hRS);
+	RS_EnableReceive();
+//  for(int i = 0; i < hRS->sRS_Timeout; i++);
+	
+	//-----------START RECEIVING or END RS----------
+	RS_RES = RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
+	
+	return RS_RES;
+}
+
+/**  
+	* @brief 	Handler for UART.
+	* @param 	hRS 		- указатель на хендлер RS.
+	* @note		Обрабатывает ошибки если есть и вызывает RS Коллбеки.
+	*					Добавить вызов этой функции в UARTx_IRQHandler().
+	*/
+void RS_UART_Handler(RS_HandleTypeDef *hRS)
+{
+  HAL_UART_IRQHandler(hRS->huart);
+	//-------------CALL RS CALLBACKS------------	
+	/* IF NO ERROR OCCURS */
+	if(hRS->huart->ErrorCode == 0) 
+	{
+		hRS->htim->Instance->CNT = 0; // reset cnt;
+		/* Start timeout */
+		if(hRS->sRS_Timeout)								// if timeout setted
+			if((hRS->huart->RxXferCount+1 == hRS->huart->RxXferSize) && RS_Is_RX_Busy(hRS)) // if first byte is received and receive is active
+      {
+				HAL_TIM_Base_Start_IT(hRS->htim);
+        RS_Set_RX_Active_Flags(hRS);
+      }
+		
+		/* RX Callback */
+		if ((	hRS->huart->RxXferCount == 0U) && RS_Is_RX_Busy(hRS) && 	// if all bytes are received and receive is active
+					hRS->huart->RxState != HAL_UART_STATE_BUSY_RX)						// also check that receive "REALLY" isnt busy
+			RS_UART_RxCpltCallback(hRS);
+		
+		/* TX Callback */
+		if ((	hRS->huart->TxXferCount == 0U) && RS_Is_TX_Busy(hRS) &&  // if all bytes are transmited and transmit is active
+					hRS->huart->gState != HAL_UART_STATE_BUSY_TX)						// also check that receive "REALLY" isnt busy
+			RS_UART_TxCpltCallback(hRS);
+	}
+	//----------------ERRORS HANDLER----------------
+	else
+	{
+    TrackerCnt_Err(hRS->rs_err);
+		/* de-init uart transfer */
+		RS_Abort(hRS, ABORT_RS);
+		RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
+				
+		// later, maybe, will be added specific handlers for err	
+	}
+}
+
+
+/**  
+	* @brief 	Handler for TIM.
+	* @param 	hRS 		- указатель на хендлер RS.
+	* @note		Попадание сюда = таймаут и перезапуск RS приема
+	*					Добавить вызов этой функции в TIMx_IRQHandler().
+	*/
+void RS_TIM_Handler(RS_HandleTypeDef *hRS)
+{
+  HAL_TIM_IRQHandler(hRS->htim);
+	HAL_TIM_Base_Stop_IT(hRS->htim);
+	RS_Abort(hRS, ABORT_RS);	
+	
+	RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
+}
+//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
+//-------------------------------------------------------------------
+
+
+
+//-------------------------------------------------------------------
+//--------------WEAK PROTOTYPES FOR PROCESSING MESSAGE---------------
+/** 
+	* @brief 	Respond accord to received message.
+	* @param 	hRS 		- указатель на хендлер RS.
+	* @param 	RS_msg 	- указатель на структуру сообщения.
+	* @return RS_RES	- статус о результате ответа на комманду.
+	* @note		Обработка принятой комманды и ответ на неё.
+	*/
+__weak RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
+{
+	/* Redefine function for user purposes */
+	return RS_ERR;
+}
+
+/** 
+	* @brief 	Collect message in buffer to transmit it.
+	* @param 	hRS 					- указатель на хендлер RS.
+	* @param 	RS_msg 				- указатель на структуру сообщения.
+	* @param 	msg_uart_buff	- указатель на буффер UART.
+	* @return RS_RES				- статус о результате заполнения буфера.
+	* @note		Заполнение буффера UART из структуры сообщения.
+	*/
+__weak RS_StatusTypeDef RS_Collect_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff)
+{
+	/* Redefine function for user purposes */
+	return RS_ERR;
+}
+
+/** 
+	* @brief 	Parse message from buffer to process it.
+	* @param 	hRS 					- указатель на хендлер RS.
+	* @param 	RS_msg 				- указатель на структуру сообщения.
+	* @param 	msg_uart_buff	- указатель на буффер UART.
+	* @return RS_RES				- статус о результате заполнения структуры.
+	* @note		Заполнение структуры сообщения из буффера UART.
+	*/
+__weak RS_StatusTypeDef RS_Parse_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff)
+{
+	/* Redefine function for user purposes */
+	return RS_ERR;
+}
+
+/** 
+	* @brief 	Define size of RX Message that need to be received.
+	* @param 	hRS 					- указатель на хендлер RS.
+	* @param 	rx_data_size 	- указатель на переменную для записи кол-ва байт для принятия.
+	* @return RS_RES				- статус о корректности рассчета кол-ва байт для принятия.
+	* @note		Определение сколько байтов надо принять по протоколу.
+	*/
+__weak RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hRS, uint32_t *rx_data_size)
+{
+	/* Redefine function for user purposes */
+	return RS_ERR;
+}
+//--------------WEAK PROTOTYPES FOR PROCESSING MESSAGE---------------
+//-------------------------------------------------------------------

diode_tester/Core/Interfaces/rs_message.h

@@ -0,0 +1,265 @@
+/**
+**************************************************************************
+* @file rs_message.h
+* @brief Заголовочный файл для модуля реализации протоколов по RS/UART.
+**************************************************************************
+* @defgroup RS_TOOLS
+* @brief 		Всякое для работы по UART/RS
+**************************************************************************
+@details
+**************************************************************************
+Для настройки RS/UART под нужный протокол, необходимо:
+  - Определить структуру сообщения RS_MsgTypeDef и 
+  дефайны RX_FIRST_PART_SIZE и MSG_SIZE_MAX.
+  - Подключить этот файл в раздел rs_message.h.
+	- Определить функции для обработки сообщения: RS_Parse_Message(), 
+  RS_Collect_Message(), RS_Response(), RS_Define_Size_of_RX_Message()
+	- Добавить UART/TIM Handler в Хендлер используемых UART/TIM.
+ 
+Так же данный модуль использует счетчики 
+**************************************************************************
+@verbatim
+Визуальное описание. Форматирование сохраняется как в коде.
+@endverbatim
+*************************************************************************/
+#ifndef __RS_LIB_H_
+#define __RS_LIB_H_
+
+#include "modbus.h" 
+
+#include "mylibs_include.h"
+#include "crc_algs.h"
+
+
+/////////////////////////////////////////////////////////////////////
+////////////////////////////---DEFINES---////////////////////////////
+/* Check that all defines required by RS are defined */
+#ifndef MSG_SIZE_MAX
+#error Define MSG_SIZE_MAX (Maximum size of message). This is necessary to create buffer for UART.
+#endif
+
+#ifndef RX_FIRST_PART_SIZE
+#error Define RX_FIRST_PART_SIZE (Size of first part of message). This is necessary to receive the first part of the message, from which determine the size of the remaining part of the message.
+#endif
+
+
+/* Clear message-uart buffer */
+#define RS_Clear_Buff(_buff_)				for(int i=0; i<MSG_SIZE_MAX;i++)	_buff_[i] = NULL
+
+/* Set/Reset flags */
+#define RS_Set_Free(_hRS_)					_hRS_->f.RS_Busy = 0
+#define RS_Set_Busy(_hRS_)					_hRS_->f.RS_Busy = 1
+
+#define RS_Set_RX_Flags(_hRS_)			    _hRS_->f.RX_Busy = 1; _hRS_->f.RX_Done = 0; _hRS_->f.RX_Half = 0
+#define RS_Set_RX_Active_Flags(_hRS_)   _hRS_->f.RX_Ongoing = 1
+
+
+#define RS_Set_TX_Flags(_hRS_)			    _hRS_->f.TX_Busy = 1; _hRS_->f.TX_Done = 0
+
+#define RS_Reset_RX_Active_Flags(_hRS_) _hRS_->f.RX_Ongoing = 0
+#define RS_Reset_RX_Flags(_hRS_)		    RS_Reset_RX_Active_Flags(_hRS_); _hRS_->f.RX_Busy = 0; _hRS_->f.RX_Done = 0; _hRS_->f.RX_Half = 0
+#define RS_Reset_TX_Flags(_hRS_)		    _hRS_->f.TX_Busy = 0; _hRS_->f.TX_Done = 0
+
+#define RS_Set_RX_End_Flag(_hRS_)		_hRS_->f.RX_Done = 1;
+#define RS_Set_TX_End_Flag(_hRS_)		_hRS_->f.TX_Done = 1
+
+#define RS_Set_RX_End(_hRS_)				RS_Reset_RX_Flags(_hRS_); RS_Set_RX_End_Flag(_hRS_)
+#define RS_Set_TX_End(_hRS_)				RS_Reset_TX_Flags(_hRS_); RS_Set_TX_End_Flag(_hRS_)
+
+/* Clear all RS stuff */
+#define RS_Clear_All(_hRS_) 				RS_Clear_Buff(_hRS_->pBufferPtr);	RS_Reset_RX_Flags(_hRS_);	RS_Reset_TX_Flags(_hRS_);
+
+//#define MB_Is_RX_Busy(_hRS_)				((_hRS_->huart->gState&HAL_USART_STATE_BUSY_RX) == HAL_USART_STATE_BUSY_RX)
+//#define MB_Is_TX_Busy(_hRS_)				((_hRS_->huart->gState&HAL_USART_STATE_BUSY_RX) == HAL_USART_STATE_BUSY_TX)
+#define RS_Is_RX_Busy(_hRS_)				(_hRS_->f.RX_Busy == 1)
+#define RS_Is_TX_Busy(_hRS_)				(_hRS_->f.TX_Busy == 1)
+
+
+#ifndef RS_EnableReceive
+#define RS_EnableReceive()
+#endif
+#ifndef RS_EnableTransmit
+#define RS_EnableTransmit()
+#endif
+////////////////////////////---DEFINES---////////////////////////////
+
+
+
+/////////////////////////////////////////////////////////////////////
+///////////////////////---STRUCTURES & ENUMS---//////////////////////
+//------------------ENUMERATIONS--------------------
+/** @brief Enums for respond CMD about RS status */
+typedef enum		// RS_StatusTypeDef
+{
+	/* IN-CODE STATUS (start from 0x01, and goes up)*/
+	/*0x01*/	RS_OK = 0x01,
+	/*0x02*/	RS_ERR,	
+	/*0x03*/	RS_ABORTED,	
+	/*0x04*/	RS_BUSY,		
+	/*0x05*/	RS_SKIP,	
+	
+	/*0x06*/	RS_COLLECT_MSG_ERR,
+	/*0x07*/	RS_PARSE_MSG_ERR,
+	
+	// reserved values
+//	/*0x00*/ 	RS_UNKNOWN_ERR = 				0x00, ///< reserved for case, if no one error founded (nothing changed response from zero)
+}RS_StatusTypeDef;
+
+
+/** @brief Enums for RS Modes */
+typedef enum	// RS_ModeTypeDef
+{
+	SLAVE_ALWAYS_WAIT =				0x01,		///< Slave mode with infinity waiting
+	SLAVE_TIMEOUT_WAIT = 			0x02,		///< Slave mode with waiting with timeout
+//	MASTER = 									0x03,		///< Master mode
+}RS_ModeTypeDef;
+
+/** @brief Enums for RS UART Modes */
+typedef enum	// RS_ITModeTypeDef
+{
+	BLCK_MODE = 		0x00,		///< Blocking mode
+	IT_MODE = 			0x01,		///< Interrupt mode
+}RS_ITModeTypeDef;
+
+/** @brief Enums for Abort modes */
+typedef enum	// RS_AbortTypeDef
+{
+	ABORT_TX = 			0x01,		///< Abort transmit
+	ABORT_RX = 			0x02,		///< Abort receive
+	ABORT_RX_TX =		0x03,		///< Abort receive and transmit
+	ABORT_RS = 			0x04,		///< Abort uart and reset RS structure
+}RS_AbortTypeDef;
+
+/** @brief Enums for RX Size modes */
+typedef enum	// RS_RXSizeTypeDef
+{
+	RS_RX_Size_Const = 			0x01,		///< size of receiving message is constant
+	RS_RX_Size_NotConst = 	0x02,		///< size of receiving message isnt constant
+}RS_RXSizeTypeDef;
+
+
+//-----------STRUCTURE FOR HANDLE RS------------
+/** @brief Struct for flags RS */
+typedef struct
+{
+	unsigned 									RX_Half:1;						///< flag: 0 - receiving msg before ByteCnt, 	0 - receiving msg after ByteCnt
+	
+	unsigned 									RS_Busy:1;						///< flag: 1 - RS is busy, 0 - RS isnt busy		
+	unsigned 									RX_Ongoing:1;				  ///< flag: 1 - receiving data right now, 	0 - waiting for receiving data
+  
+	unsigned 									RX_Busy:1;						///< flag: 1 - receiving is active, 	0 - receiving isnt active
+	unsigned 									TX_Busy:1;						///< flag: 1 - transmiting is active, 0 - transmiting isnt active				
+	
+	unsigned 									RX_Done:1;						///< flag: 1 - receiving is done, 	0 - receiving isnt done	
+	unsigned 									TX_Done:1;						///< flag: 1 - transmiting is done, 0 - transmiting isnt done	
+		
+	// setted by user
+	unsigned 									MessageHandled:1;		  ///< flag: 1 - RS command is handled, 				0 - RS command isnt handled yet
+	unsigned 									EchoResponse:1;			  ///< flag: 1 - response with received msg,		0 - response with own msg
+	unsigned 									DeferredResponse:1;	  ///< flag: 1 - response not in interrupt, 		0 - response in interrupt
+	unsigned 									ReInit_UART:1;				///< flag: 1 - need to reinitialize uart, 		0 - nothing	
+}RS_FlagsTypeDef;
+
+
+
+/** 
+	* @brief 	Handle for RS communication.
+	* @note 	Prefixes: h - handle, s - settings, f - flag
+	*/
+typedef struct	// RS_HandleTypeDef
+{		
+	/* MESSAGE */
+	uint8_t										ID;										///< ID of RS "channel"
+	RS_MsgTypeDef 						*pMessagePtr;					///< pointer to message struct
+	uint8_t 									*pBufferPtr;					///< pointer to message buffer
+	uint32_t									RS_Message_Size;			///< size of whole message, not only data
+	
+	/* HANDLERS and SETTINGS */
+	UART_HandleTypeDef 				*huart;								///< handler for used uart
+	TIM_HandleTypeDef 				*htim;								///< handler for used tim
+	RS_ModeTypeDef						sRS_Mode;							///< setting: slave or master @ref RS_ModeTypeDef
+	RS_ITModeTypeDef					sRS_IT_Mode;					///< setting: 1 - IT mode, 	0 - Blocking mode 
+	uint16_t 									sRS_Timeout;					///< setting: timeout in ms
+	RS_RXSizeTypeDef					sRS_RX_Size_Mode;			///< setting: 1 - not const, 0 - const 
+	
+	/* FLAGS */		
+	RS_FlagsTypeDef           f;                    ///< These flags for controling receive/transmit
+  
+	/* RS STATUS */
+	RS_StatusTypeDef 					RS_STATUS;						///< RS status
+  RS_TrackerTypeDef         rs_err;
+}RS_HandleTypeDef;
+extern RS_HandleTypeDef hmodbus1;
+
+
+///////////////////////---STRUCTURES & ENUMS---//////////////////////
+
+
+/////////////////////////////////////////////////////////////////////
+///////////////////////////---FUNCTIONS---///////////////////////////
+//----------------FUNCTIONS FOR PROCESSING MESSAGE-------------------
+/*--------------------Defined by users purposes--------------------*/
+/* Respond accord to received message */
+RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
+
+/* Collect message in buffer to transmit it */
+RS_StatusTypeDef RS_Collect_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff);
+
+/* Parse message from buffer to process it */
+RS_StatusTypeDef RS_Parse_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff);
+
+/* Define size of RX Message that need to be received */
+RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hRS, uint32_t *rx_data_size);
+
+
+//-------------------------GENERAL FUNCTIONS-------------------------
+/*-----------------Should be called from main code-----------------*/
+/* Start receive IT */
+RS_StatusTypeDef RS_Receive_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
+
+/* Start transmit IT */
+RS_StatusTypeDef RS_Transmit_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
+
+/* Initialize UART and handle RS stucture */
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart, TIM_SettingsTypeDef *stim, uint8_t *pRS_BufferPtr);
+#else
+RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_HandleTypeDef *huart, TIM_HandleTypeDef *htim, uint8_t *pRS_BufferPtr);
+#endif
+/* ReInitialize UART and RS receive */
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart);
+#else
+HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_HandleTypeDef *suart);
+#endif
+/* Abort RS/UART */
+RS_StatusTypeDef RS_Abort(RS_HandleTypeDef *hRS, RS_AbortTypeDef AbortMode);
+//-------------------------GENERAL FUNCTIONS-------------------------
+
+
+//-------------------------------------------------------------------
+//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
+/* Handle for starting receive */
+RS_StatusTypeDef RS_Handle_Receive_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
+/* Handle for starting transmit */
+RS_StatusTypeDef RS_Handle_Transmit_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
+/* UART RX Callback: define behaviour after receiving parts of message */
+RS_StatusTypeDef RS_UART_RxCpltCallback(RS_HandleTypeDef *hRS);
+/* UART TX Callback: define behaviour after transmiting message */
+RS_StatusTypeDef RS_UART_TxCpltCallback(RS_HandleTypeDef *hRS);
+/* Handler for UART */
+void RS_UART_Handler(RS_HandleTypeDef *hRS);
+/* Handler for TIM */
+void RS_TIM_Handler(RS_HandleTypeDef *hRS);
+//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
+///////////////////////////---FUNCTIONS---///////////////////////////
+
+
+#ifndef printf_rs_err
+#define printf_rs_err(...)
+#endif
+
+#ifndef printf_rs
+#define printf_rs(...)
+#endif
+#endif // __RS_LIB_H_

diode_tester/Core/MyLibs/bit_access.h

@@ -0,0 +1,249 @@
+/** 
+**************************************************************************
+* @file mylibs_defs.h
+* @brief Заголочный файл для дефайнов библиотеки MyLibsGeneral.
+**************************************************************************
+* @defgroup BIT_ACCESS_DEFINES    Bit access defines
+* @ingroup  MYLIBS_DEFINES
+* @brief 		Всякое для доступа к битам в unsigned
+*************************************************************************/
+#ifndef __BIT_ACCESS_H_
+#define __BIT_ACCESS_H_
+#include "mylibs_defs.h"
+
+/** 
+	* @addtogroup BIT_ACCESS_TYPEDEF   Byte access typedefs
+	* @ingroup 		BIT_ACCESS_DEFINES
+  * @brief 		  Дефайны юнионов для обращения к битам.
+	@{
+	*/
+typedef union
+{
+  uint8_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned reserved:4;
+  }bit;
+}uint4_BitTypeDef;
+
+typedef union
+{
+  uint8_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned bit4:1;
+    unsigned reserved:3;
+  }bit;
+}uint5_BitTypeDef;
+
+typedef union
+{
+  uint8_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned bit4:1;
+    unsigned bit5:1;
+    unsigned reserved:2;
+  }bit;
+}uint6_BitTypeDef;
+
+typedef union
+{
+  uint8_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned bit4:1;
+    unsigned bit5:1;
+    unsigned bit6:1;
+    unsigned reserved:1;
+  }bit;
+}uint7_BitTypeDef;
+
+typedef union
+{
+  uint8_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned bit4:1;
+    unsigned bit5:1;
+    unsigned bit6:1;
+    unsigned bit7:1;
+  }bit;
+}uint8_BitTypeDef;
+
+typedef union
+{
+  uint16_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned bit4:1;
+    unsigned bit5:1;
+    unsigned bit6:1;
+    unsigned bit7:1;
+    unsigned bit8:1;
+    unsigned bit9:1;
+    unsigned bit10:1;
+    unsigned bit11:1;
+    unsigned bit12:1;
+    unsigned bit13:1;
+    unsigned bit14:1;
+    unsigned bit15:1;
+  }bit;
+}uint16_BitTypeDef;
+
+
+typedef union
+{
+  uint32_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned bit4:1;
+    unsigned bit5:1;
+    unsigned bit6:1;
+    unsigned bit7:1;
+    unsigned bit8:1;
+    unsigned bit9:1;
+    unsigned bit10:1;
+    unsigned bit11:1;
+    unsigned bit12:1;
+    unsigned bit13:1;
+    unsigned bit14:1;
+    unsigned bit15:1;
+    unsigned bit16:1;
+    unsigned bit17:1;
+    unsigned bit18:1;
+    unsigned bit19:1;
+    unsigned bit20:1;
+    unsigned bit21:1;
+    unsigned bit22:1;
+    unsigned bit23:1;
+    unsigned bit24:1;
+    unsigned bit25:1;
+    unsigned bit26:1;
+    unsigned bit27:1;
+    unsigned bit28:1;
+    unsigned bit29:1;
+    unsigned bit30:1;
+    unsigned bit31:1;
+  }bit;
+}uint32_BitTypeDef;
+
+
+typedef union
+{
+  uint64_t all;
+  struct
+  {
+    unsigned bit0:1;
+    unsigned bit1:1;
+    unsigned bit2:1;
+    unsigned bit3:1;
+    unsigned bit4:1;
+    unsigned bit5:1;
+    unsigned bit6:1;
+    unsigned bit7:1;
+    unsigned bit8:1;
+    unsigned bit9:1;
+    unsigned bit10:1;
+    unsigned bit11:1;
+    unsigned bit12:1;
+    unsigned bit13:1;
+    unsigned bit14:1;
+    unsigned bit15:1;
+    unsigned bit16:1;
+    unsigned bit17:1;
+    unsigned bit18:1;
+    unsigned bit19:1;
+    unsigned bit20:1;
+    unsigned bit21:1;
+    unsigned bit22:1;
+    unsigned bit23:1;
+    unsigned bit24:1;
+    unsigned bit25:1;
+    unsigned bit26:1;
+    unsigned bit27:1;
+    unsigned bit28:1;
+    unsigned bit29:1;
+    unsigned bit30:1;
+    unsigned bit31:1;
+    unsigned bit32:1;
+    unsigned bit33:1;
+    unsigned bit34:1;
+    unsigned bit35:1;
+    unsigned bit36:1;
+    unsigned bit37:1;
+    unsigned bit38:1;
+    unsigned bit39:1;
+    unsigned bit40:1;
+    unsigned bit41:1;
+    unsigned bit42:1;
+    unsigned bit43:1;
+    unsigned bit44:1;
+    unsigned bit45:1;
+    unsigned bit46:1;
+    unsigned bit47:1;
+    unsigned bit48:1;
+    unsigned bit49:1;
+    unsigned bit50:1;
+    unsigned bit51:1;
+    unsigned bit52:1;
+    unsigned bit53:1;
+    unsigned bit54:1;
+    unsigned bit55:1;
+    unsigned bit56:1;
+    unsigned bit57:1;
+    unsigned bit58:1;
+    unsigned bit59:1;
+    unsigned bit60:1;
+    unsigned bit61:1;
+    unsigned bit62:1;
+    unsigned bit63:1;
+  }bit;
+}uint64_BitTypeDef;
+/** BIT_ACCESS_TYPEDEF
+  * @}
+  */
+
+/** 
+	* @addtogroup BIT_ACCESS_FUNCTIONS   Byte access functions
+	* @ingroup 		BIT_ACCESS_DEFINES
+  * @brief 		  Дефайны для обращения к битам в unsigned.
+	@{
+	*/
+#define uint8_bit(_uint8_, _bit_)       (*(uint8_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
+#define uint16_bit(_uint8_, _bit_)      (*(uint16_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
+#define uint32_bit(_uint8_, _bit_)      (*(uint32_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
+#define uint64_bit(_uint8_, _bit_)      (*(uint64_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
+ 
+/** BIT_ACCESS_FUNCTIONS
+  * @}
+  */
+#endif //__BIT_ACCESS_H_

diode_tester/Core/MyLibs/general_gpio.c

@@ -0,0 +1,128 @@
+/** 
+	**************************************************************************
+	* @file general_gpio.c
+	* @brief Модуль для инициализации портов.
+	**************************************************************************
+		@verbatim
+		//-------------------Функции-------------------//
+		Functions: users
+			- GPIO_Clock_Enable							Инициализация тактирования порта
+		@endverbatim
+***************************************************************************/
+#include "general_gpio.h"
+
+//-------------------------------------------------------------------
+//------------------------GPIO INIT FUNCTIONS------------------------
+
+HAL_StatusTypeDef GPIO_Clock_Enable(GPIO_TypeDef *GPIOx)
+{	
+	HAL_StatusTypeDef status = HAL_OK;
+	// choose port for enable clock
+	if (GPIOx==GPIOA)
+		__HAL_RCC_GPIOA_CLK_ENABLE();
+	else if (GPIOx==GPIOB)
+		__HAL_RCC_GPIOB_CLK_ENABLE();
+	else if (GPIOx==GPIOC)
+		__HAL_RCC_GPIOC_CLK_ENABLE();
+#ifdef GPIOD
+	else if (GPIOx==GPIOD)
+		__HAL_RCC_GPIOD_CLK_ENABLE();
+#endif
+#ifdef GPIOE
+	else if (GPIOx==GPIOE)
+		__HAL_RCC_GPIOE_CLK_ENABLE();
+#endif
+	else
+		status = HAL_ERROR;
+	
+	return status;
+}
+
+//------------------------GPIO INIT FUNCTIONS------------------------
+//-------------------------------------------------------------------
+
+
+//-------------------------------------------------------------------
+//------------------------GPIO LED FUNCTIONS-------------------------
+
+/**
+  * @brief  Включить светодиод 
+  */
+void GPIO_LED_On(GPIO_LEDTypeDef *led)
+{
+  led->state = LED_IS_ON;
+  HAL_GPIO_WritePin(led->LED_Port, led->LED_Pin, LED_ON);
+}
+/**
+  * @brief  Выключить светодиод 
+  */
+void GPIO_LED_Off(GPIO_LEDTypeDef *led)
+{
+  led->state = LED_IS_OFF;
+  HAL_GPIO_WritePin(led->LED_Port, led->LED_Pin, LED_OFF);
+}
+
+/**
+  * @brief Активировать моргание светодиодом
+	*/
+void GPIO_LED_Blink_Start(GPIO_LEDTypeDef *led, uint32_t period)
+{
+  led->state = LED_IS_BLINKING;
+  led->LED_Period = period;
+}
+  
+/**
+  * @brief Моргание светодиодом
+	*/
+void GPIO_LED_Blink_Handle(GPIO_LEDTypeDef *led)
+{
+  if(led->state == LED_IS_BLINKING)
+  {
+    uint32_t tickcurrent = HAL_GetTick();
+    if((tickcurrent - led->tickprev) > led->LED_Period)
+    {
+      HAL_GPIO_TogglePin(led->LED_Port, led->LED_Pin);
+      led->tickprev = tickcurrent;
+    }
+  }
+}
+//------------------------GPIO LED FUNCTIONS-------------------------
+//-------------------------------------------------------------------
+
+//-------------------------------------------------------------------
+//------------------------GPIO SW FUNCTIONS-------------------------
+
+/**
+  * @brief Считать состоянии кнопки запуска 
+  */
+uint8_t GPIO_Read_Swich(GPIO_SwitchTypeDef *sw)
+{
+
+  if(HAL_GPIO_ReadPin(sw->Sw_Port, sw->Sw_Pin) == SW_ON)
+  {
+    sw->Sw_PrevState = 1;
+    
+    if(sw->tickprev == 0)
+      sw->tickprev = HAL_GetTick();
+    
+    if((HAL_GetTick() - sw->tickprev) > sw->Sw_FilterDelay)
+    {
+      if(HAL_GPIO_ReadPin(sw->Sw_Port, sw->Sw_Pin) == SW_ON)
+      {
+        return 1;
+      }
+      else
+      {
+        sw->tickprev = 0;
+        return 0;
+      }
+    }
+  }
+  else
+  {
+    sw->Sw_PrevState = 0;
+  }
+  return 0;
+}
+//------------------------GPIO SW FUNCTIONS-------------------------
+//-------------------------------------------------------------------

diode_tester/Core/MyLibs/general_gpio.h

@@ -0,0 +1,72 @@
+/** 
+	**************************************************************************
+	* @file general_gpio.h
+	* @brief Заголовочный файл для модуля инициализации портов.
+	*************************************************************************/
+#ifndef __GPIO_GENERAL_H_
+#define __GPIO_GENERAL_H_
+
+#include "mylibs_defs.h"
+
+
+#define SPI_Alternate_Mapping(INSTANCE) 			 ((((INSTANCE) == TIM1) || ((INSTANCE) == TIM2))? GPIO_AF1_TIM1: 																										\
+																								(((INSTANCE) == TIM3) || ((INSTANCE) == TIM4) || ((INSTANCE) == TIM5))? GPIO_AF2_TIM3:  													\
+																								(((INSTANCE) == TIM8) || ((INSTANCE) == TIM9) || ((INSTANCE) == TIM10) || ((INSTANCE) == TIM11))? GPIO_AF3_TIM8:  \
+																								(((INSTANCE) == TIM12) || ((INSTANCE) == TIM13) || ((INSTANCE) == TIM14))? GPIO_AF9_TIM12: 												\
+																								(0))
+
+
+#define TIM_Alternate_Mapping(INSTANCE) 			 ((((INSTANCE) == TIM1) || ((INSTANCE) == TIM2))? GPIO_AF1_TIM1: 																										\
+																								(((INSTANCE) == TIM3) || ((INSTANCE) == TIM4) || ((INSTANCE) == TIM5))? GPIO_AF2_TIM3:  													\
+																								(((INSTANCE) == TIM8) || ((INSTANCE) == TIM9) || ((INSTANCE) == TIM10) || ((INSTANCE) == TIM11))? GPIO_AF3_TIM8:  \
+																								(((INSTANCE) == TIM12) || ((INSTANCE) == TIM13) || ((INSTANCE) == TIM14))? GPIO_AF9_TIM12: 												\
+																								(0))
+
+
+typedef enum
+{
+  LED_IS_OFF = 0,
+  LED_IS_ON = 1,
+  LED_IS_BLINKING = 2,
+  LED_IS_FADING = 3,
+}GPIO_LEDStateTypeDef;
+
+typedef struct
+{
+  GPIO_LEDStateTypeDef state;
+  
+  GPIO_TypeDef  *LED_Port;
+  uint32_t      LED_Pin;
+  
+  uint32_t      LED_Period;
+  uint32_t      tickprev;
+}GPIO_LEDTypeDef;
+
+typedef struct
+{
+  GPIO_TypeDef  *Sw_Port;
+  uint32_t      Sw_Pin;
+  
+  uint32_t      Sw_PrevState;
+  uint32_t      Sw_FilterDelay;
+  uint32_t      tickprev;
+}GPIO_SwitchTypeDef;
+
+/////////////////////////////////////////////////////////////////////
+///////////////////////////---FUNCTIONS---///////////////////////////
+HAL_StatusTypeDef GPIO_Clock_Enable(GPIO_TypeDef *GPIOx);
+
+/* Считать состоянии кнопки запуска */
+uint8_t GPIO_Read_Swich(GPIO_SwitchTypeDef *swstart);
+/* Включить светодиод */
+void GPIO_LED_On(GPIO_LEDTypeDef *led);
+/* Выключить светодиод */
+void GPIO_LED_Off(GPIO_LEDTypeDef *led);
+/* Активировать моргание светодиодом */
+void GPIO_LED_Blink_Start(GPIO_LEDTypeDef *led, uint32_t period);
+/* Моргание светодиодом */
+void GPIO_LED_Blink_Handle(GPIO_LEDTypeDef *led);
+///////////////////////////---FUNCTIONS---///////////////////////////
+
+
+#endif // __GPIO_GENERAL_H_

diode_tester/Core/MyLibs/mylibs_config.h

@@ -0,0 +1,36 @@
+/** 
+**************************************************************************
+* @file mylibs_config.h
+* @brief Конфигурации для библиотек MyLibs
+**************************************************************************
+* @defgroup MYLIBS_CONFIG   Configs My Libs
+* @ingroup  MYLIBS_ALL
+* @brief 		Конфигурации для библиотек MyLibs
+@{
+*************************************************************************/
+#ifndef __MYLIBS_CONFIG_H_
+#define __MYLIBS_CONFIG_H_
+
+#include "stm32f1xx_hal.h"
+
+// user includes
+#include "interface_config.h"
+#include "tester_config.h"
+
+
+#define RS_USER_VARS_NUMB       0
+#define ADC_USER_VARS_NUMB      0
+#define ADC_CH_USER_VARS_NUMB   0
+
+
+#define INCLUDE_BIT_ACCESS_LIB
+#define INCLUDE_TRACKERS_LIB
+#define INCLUDE_TRACE_LIB
+//#define INCLUDE_GENERAL_PERIPH_LIBS
+//#define FREERTOS_DELAY
+
+
+/** MYLIBS_CONFIG
+  * @}
+  */
+#endif //__MYLIBS_CONFIG_H_

diode_tester/Core/MyLibs/mylibs_defs.h

@@ -0,0 +1,106 @@
+/** 
+**************************************************************************
+* @file mylibs_defs.h
+* @brief Заголочный файл для дефайнов библиотеки MyLibsGeneral.
+**************************************************************************
+* @defgroup MYLIBS_DEFINES  My Libs defines
+* @brief 		Базовые дефайны для всего проекта
+*
+*************************************************************************/
+#ifndef __MYLIBS_DEFINES_H_
+#define __MYLIBS_DEFINES_H_
+
+#include "stm32f1xx_hal.h"
+#include "mylibs_config.h"
+
+/***************************************************************************
+******************************ERROR_HANDLER********************************/
+/** 
+	* @addtogroup ERROR_HANDLER_DEFINES   Error Handler defines
+	* @ingroup 		MYLIBS_DEFINES
+  * @brief 		  Дефайны для определения функции обработки ошибок
+	@{
+	*/
+
+/* extern Error_Handler from main.h */
+extern void Error_Handler(void);
+
+/* Define error handler for MyLibs */
+#define MyLibs_Error_Handler(_params_) 	Error_Handler(_params_)
+/* If error handler not defined - set void */
+#ifndef MyLibs_Error_Handler
+#define ((void)0U)
+#endif // MyLibs_Error_Handler
+
+/** ERROR_HANDLER_DEFINES
+  * @}
+  */
+  
+
+/***************************************************************************
+********************************ACCESS_DEFINES*****************************/
+
+#define ClearStruct(_struct_)     memset(&(_struct_), 0, sizeof(_struct_))
+
+
+
+/***************************************************************************
+******************************DELAYS_DEFINES*******************************/
+/** 
+	* @addtogroup DELAYS_DEFINES    Delays defines
+	* @ingroup 		MYLIBS_DEFINES
+  * @brief 		  Дефайны для реализации задержек
+	@{
+	*/
+
+#ifdef FREERTOS_DELAY
+	#define msDelay(_ms_)			osDelay(_ms_)
+#else
+	#define msDelay(_ms_)			if(_ms_ != 0) HAL_Delay(_ms_-1)
+#endif
+
+/** DELAYS_DEFINES
+  * @}
+  */
+
+
+/***************************************************************************
+*******************************MATH_DEFINES********************************/
+/** 
+	* @addtogroup MATH_DEFINES      Math defines
+	* @ingroup 		MYLIBS_DEFINES
+  * @brief 		  Дефайны для различных математических функций
+	@{
+	*/
+
+/**
+	* @brief	Calc dividing including remainder
+	*	@param 	_val_		- делимое.
+	*	@param 	_div_		- делитель.
+	*	@details 	Если результат деления без остатка: он возвращается как есть
+						Если с остатком - округляется вверх
+	*/
+//#define Divide_Up(_val_, _div_)												(((_val_)%(_div_))? (_val_)/(_div_)+1 : (_val_)/_div_)	/* через тернарный оператор */
+#define Divide_Up(_val_, _div_)												((_val_ - 1) / _div_) + 1																	/* через мат выражение */	
+
+/** 
+	* @brief 	Swap between Little Endian and Big Endian
+	* @param 	v 			- Переменная для свапа.
+  * @return v (new)	- Свапнутая переменная.
+  * @details 	Переключения между двумя типами хранения слова: HI-LO байты и LO-HI байты.
+	*/
+#define ByteSwap16(v)																	(((v&0xFF00) >> (8)) | ((v&0x00FF) << (8)))
+
+/** 
+	* @brief 	Absolute
+	* @param 	x 			- Переменная для модудя.
+  * @return x (new)	- Число по модулю.
+  * @details  Берет число по модулю. Хз как работает библиотечный abs в stdlib.h, мб это быстрее, но вряд ли конечно.
+	*/
+#define ABS(x) ( ((x) > 0)? (x) : -(x))?
+
+/** MATH_DEFINES
+  * @}
+  */
+  
+#endif //__MYLIBS_DEFINES_H_

diode_tester/Core/MyLibs/mylibs_include.h

@@ -0,0 +1,80 @@
+/** 
+**************************************************************************
+* @file mylibs_include.h
+* @brief Заголочный файл для всех библиотек
+**************************************************************************
+@details
+Здесь нужно собрать библиотеки и дефайны, которые должны быть видны во всем проекте,
+чтобы не подключать 100 инклюдов в каждом ".c" файле
+**************************************************************************
+* @defgroup MYLIBS_ALL      My Libs
+* @brief 		Все используемые MyLibs библиотеки
+*
+*************************************************************************/
+#ifndef __MYLIBS_INCLUDE_H_
+#define __MYLIBS_INCLUDE_H_
+
+#include "mylibs_defs.h"
+
+
+#ifdef ARM_MATH_CM4
+	#include "arm_math.h"
+#endif
+
+
+#ifdef INCLUDE_BIT_ACCESS_LIB
+#include "bit_access.h"
+#endif
+
+#ifdef INCLUDE_TRACKERS_LIB
+#include "trackers.h"
+#endif
+
+#ifdef INCLUDE_TRACE_LIB
+#include "trace.h"
+#endif
+
+
+
+#ifdef INCLUDE_GENERAL_PERIPH_LIBS
+
+#include "general_flash.h"
+#include "general_gpio.h"
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "general_spi.h"
+#endif
+#ifdef HAL_UART_MODULE_ENABLED
+#include "general_uart.h"
+#endif
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "general_tim.h"
+#endif
+
+#endif //INCLUDE_GENERAL_PERIPH_LIBS
+
+
+
+
+/////////////////////////---USER SETTINGS---/////////////////////////
+// user includes
+#include "stdlib.h"
+#include "string.h"
+#include "stdio.h"
+#include "math.h"
+
+#include "main.h"
+#include "modbus_data.h"
+#include "general_gpio.h"
+
+/** @brief Struct for trackers for Measure */
+/** @brief Struct for trackers for RS */
+typedef TrackerTypeDef(RS_USER_VARS_NUMB)      RS_TrackerTypeDef;
+/** @brief Struct for trackers for ADC */
+typedef TrackerTypeDef(ADC_USER_VARS_NUMB)     ADC_TrackerTypeDef;
+/** @brief Struct for trackers for ADC Channel */
+typedef TrackerTypeDef(ADC_CH_USER_VARS_NUMB)  ADCChannel_TrackerTypeDef;
+/////////////////////////---USER SETTINGS---/////////////////////////
+
+
+#endif // __MYLIBS_INCLUDE_H_
+

diode_tester/Core/MyLibs/trace.h

@@ -0,0 +1,80 @@
+/** 
+**************************************************************************
+* @file trace.h
+* @brief Заголочный файл для работы с трассировкой.
+**************************************************************************
+* @addtogroup 	TRACE           Trace defines
+* @ingroup 		  MYLIBS_DEFINES
+* @brief 		    Дефайны для работы с трассировкой
+*************************************************************************/
+#ifndef __TRACE_H_
+#define __TRACE_H_
+#include "mylibs_defs.h"
+
+/** 
+	* @addtogroup TRACE_SERIAL    Serial trace defines
+	* @ingroup 		TRACE
+  * @brief 		  Дефайны для работы с serial трассировкой
+  * @details    Определяется дефайн my_printf() для работы с serial трассировкой:
+    - для RTT это будет вызов функции SEGGER_RTT_printf(), с подключением библиотеки SEGGER_RTT.h
+    - для SWO это будет просто printf(), но библиотеку STDOUT надо подключить самостоятельно:
+    
+    @verbatim
+    Manage Run-Time Environment -> Compiler -> I/O -> STDOUT
+    @endverbatim
+    
+    - Если трассировка отключена, то все дефайны определяются как 'ничего' и на производительность кода не влияют
+	@{
+	*/
+/* Выбор какой serial trace использовать */
+#ifdef SERIAL_TRACE_ENABLE
+
+  #if defined(RTT_TRACE_ENABLE)
+    #undef SWO_TRACE_ENABLE
+    #include "SEGGER_RTT.h"
+    #define my_printf(...)     SEGGER_RTT_printf(0, __VA_ARGS__)
+  #elif defined(SWO_TRACE_ENABLE)
+    #undef RTT_TRACE_ENABLE
+    #define my_printf(...)     printf(__VA_ARGS__)
+  #else // NO_TRACE
+    #define my_printf(...)     
+    #warning No trace is selected. Serial debug wont work.
+  #endif // RTT_TRACE_ENABLE/SWO_TRACE_ENABLE/NO_TRACE
+#else //SERIAL_TRACE_ENABLE
+  #define my_printf(...)     
+  #undef RTT_TRACE_ENABLE
+  #undef SWO_TRACE_ENABLE
+
+#endif //SERIAL_TRACE_ENABLE
+
+/** TRACE_SERIAL
+  * @}
+  */
+
+
+/** 
+	* @addtogroup TRACE_GPIO    GPIO trace defines
+	* @ingroup 		TRACE
+  * @brief 		  Дефайны для работы с GPIO трассировкой
+  * @details    Определяется дефайны для работы с GPIO трассировкой:
+    - TRACE_GPIO_RESET() - для сброса ножки GPIO (через BSRR)
+    - TRACE_GPIO_SET() - для выставления ножки GPIO (через BSRR)
+    
+    - Если трассировка отключена, то все дефайны определяются как 'ничего' и на производительность кода не влияют
+	@{
+	*/
+#ifndef GPIO_TRACE_ENABLE
+  #define TRACE_GPIO_RESET(_gpio_,_pin_)
+  #define TRACE_GPIO_SET(_gpio_,_pin_)
+#else
+  #define TRACE_GPIO_RESET(_gpio_,_pin_)				(_gpio_)->BSRR = ((_pin_)<<16)
+  #define TRACE_GPIO_SET(_gpio_,_pin_)					(_gpio_)->BSRR = (((_pin_)))
+#endif //GPIO_TRACE_ENABLE
+
+
+/** TRACE_GPIO
+  * @}
+  */
+
+
+#endif //__TRACE_H_

diode_tester/Core/MyLibs/trackers.h

@@ -0,0 +1,141 @@
+/** 
+**************************************************************************
+* @file mylibs_defs.h
+* @brief Заголочный файл для дефайнов библиотеки MyLibsGeneral.
+**************************************************************************
+* @defgroup MYLIBS_DEFINES  My Libs defines
+* @brief 		Базовые дефайны для всего проекта
+*
+*************************************************************************/
+#ifndef __TRACKERS_H_
+#define __TRACKERS_H_
+#include "mylibs_defs.h"
+
+/** 
+	* @addtogroup TRACKERS        Trackers defines
+	* @ingroup 		MYLIBS_DEFINES
+  * @brief 		  Дефайны для работы с трекерами
+  * @details    Есть дефайн для объявления структуры трекера: TrackerTypeDef(num_user_vars). 
+    Структура состоит из следующих элементов: 
+    - cnt_ok
+    - cnt_err
+    - cnt_warn
+    - user[num_user_vars]    
+    Также есть ряд функций (дефайнов) для обращения к элементам этой структуры.
+    
+    
+    Если трассировка отключена, то все дефайны определяются как ничего и на производительность кода не влияют  
+    
+    @par Пример:
+    Определяем typedef трекера измерений @ref Measure_TrackerTypeDef
+
+    @verbatim
+    typedef TrackerTypeDef(MEASURE_USER_VARS_NUMB) Measure_TrackerTypeDef;
+    @endverbatim
+
+    И через @ref Measure_TrackerTypeDef структура подключается в @ref TESTER_MeasureHandleTypeDef, а также
+    если необхожимо в другие структуру, например в структуру всех ошибок через указатель @ref TESTER_TrackerTypeDef
+    
+	@{  
+	*/
+
+#ifdef TRACKERS_ENABLE
+  /** 
+    * @brief Структура для счетчиков отладки
+    * @param num_user_vars - количество пользовательских счетчиков
+    * @details Содержит счетчик для успешных событый (cnt_ok),
+    * счетчик для ошибок (cnt_err), счетчик для предупреждений (cnt_warn).
+    *
+    * Также есть возможность объявить пользовательские счетчики в 
+    * количестве <num_user_vars> штук.
+    *
+    * Для работы с структурой можно использовать функции:
+    * - TrackerCnt_Ok()
+    * - TrackerCnt_Err()
+    * - TrackerCnt_Warn()
+    * - TrackerCnt_User()
+    * - TrackerWrite_User()
+    * - TrackerClear_All()
+    * - TrackerClear_Ok()
+    * - TrackerClear_Err()
+    * - TrackerClear_Warn()
+    * - TrackerClear_User()
+    * - TrackerClear_UserAll()
+    */
+  #define TrackerTypeDef(num_user_vars)       \
+  struct                                      \
+  {                                           \
+    uint32_t cnt_ok;                          \
+    uint32_t cnt_err;                         \
+    uint32_t cnt_warn;                        \
+    uint32_t user[num_user_vars];             \
+  }
+
+  /** @brief Получить количетство пользовательских переменных */
+  #define num_of_usercnts(_user_)                               (sizeof(_user_) / sizeof(_user_[0]))
+  /** @brief Проверка существует ли указанная пользовательская переменная */
+  #define assert_usertracker(_cntstruct_, _uservarnumb_)        ((_uservarnumb_) < num_of_usercnts((_cntstruct_).user))
+  /** @brief Условие для проверки существует ли указанная пользовательская переменная */
+  #define if_assert_usertracker(_cntstruct_, _uservarnumb_)     if(assert_usertracker(_cntstruct_, _uservarnumb_))
+  /** @brief Тернарный оператор для проверки существует ли указанная пользовательская переменная */
+  #define tern_assert_usertracker(_cntstruct_, _uservarnumb_)   (assert_usertracker(_cntstruct_, _uservarnumb_)) ? _uservarnumb_ : 0
+
+  
+  
+  /** 
+    * @brief Запись числа в пользовательскую переменную 
+    * @note   Здесь нет проверки - существует ли пользовательская переменная! 
+    *         Есть возможность выйти за границы структуры!!! 
+    *         Чтобы этого избежать используете дефайн #ref assert_usertracker()
+    */
+  #define TrackerGet_User(_cntstruct_, _uservarnumb_)             (_cntstruct_).user[tern_assert_usertracker(_cntstruct_, _uservarnumb_)]
+  
+  
+  
+  /** @brief Инкрементирование счетчика успешных событий */
+  #define TrackerCnt_Ok(_cntstruct_)                              (_cntstruct_).cnt_ok++
+  /** @brief Инкрементирование счетчика ошибок */
+  #define TrackerCnt_Err(_cntstruct_)                             (_cntstruct_).cnt_err++
+  /** @brief Инкрементирование счетчика предупреждений */
+  #define TrackerCnt_Warn(_cntstruct_)                            (_cntstruct_).cnt_warn++
+  /** @brief Инкрементирование пользовательской переменной */
+  #define TrackerCnt_User(_cntstruct_, _uservarnumb_)             if_assert_usertracker(_cntstruct_, _uservarnumb_) (_cntstruct_).user[_uservarnumb_]++;
+  /** @brief Запись числа в пользовательскую переменную */
+  #define TrackerWrite_User(_cntstruct_, _uservarnumb_, _val_)    if_assert_usertracker(_cntstruct_, _uservarnumb_) (_cntstruct_).user[_uservarnumb_] = (_val_)
+
+  /** @brief Очистка всей структуры */
+  #define TrackerClear_All(_cntstruct_)                           memset(&(_cntstruct_), 0, sizeof(_cntstruct_))
+  /** @brief Очистка счетчика успешных событий */
+  #define TrackerClear_Ok(_cntstruct_)                            (_cntstruct_).cnt_ok = 0
+  /** @brief Очистка счетчика ошибок */
+  #define TrackerClear_Err(_cntstruct_)                           (_cntstruct_).cnt_err = 0
+  /** @brief Очистка счетчика предупреждений */
+  #define TrackerClear_Warn(_cntstruct_)                          (_cntstruct_).cnt_warn = 0
+  /** @brief Очистка пользовательской переменной */
+  #define TrackerClear_User(_cntstruct_, _uservarnumb_)           if_assert_usertracker(_cntstruct_, _uservarnumb_) (_cntstruct_).user[_uservarnumb_] = 0;
+  /** @brief Очистка всех пользовательских переменных */
+  #define TrackerClear_UserAll(_cntstruct_)                       memset(&(_cntstruct_).user, 0, sizeof((_cntstruct_).user))
+
+#else //TRACKERS_ENABLE
+  #define TrackerTypeDef(num_user_vars)                    void *
+
+  #define num_of_usercnts(_user_)                               
+  #define assert_tracecnt(_cntstruct_, _uservarnumb_)           
+
+  #define TrackerCnt_Ok(_cntstruct_)                              
+  #define TrackerCnt_Err(_cntstruct_)                             
+  #define TrackerCnt_Warn(_cntstruct_)                            
+  #define TrackerCnt_User(_cntstruct_, _uservarnumb_)                 
+  #define TrackerWrite_User(_cntstruct_, _uservarnumb_, _val_)     
+
+  /** @brief Очистка всей структуры */
+  #define TrackerClear_All(_cntstruct_)                        
+  #define TrackerClear_Ok(_cntstruct_)                         
+  #define TrackerClear_Err(_cntstruct_)                        
+  #define TrackerClear_Warn(_cntstruct_)                       
+  #define TrackerClear_User(_cntstruct_)                       
+  #define TrackerClear_UserAll(_cntstruct_)                    
+
+#endif //TRACKERS_ENABLE
+  
+#endif //__TRACKERS_H_

diode_tester/Core/Src/adc.c

@@ -0,0 +1,142 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    adc.c
+  * @brief   This file provides code for the configuration
+  *          of the ADC instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "adc.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+ADC_HandleTypeDef hadc1;
+DMA_HandleTypeDef hdma_adc1;
+
+/* ADC1 init function */
+void MX_ADC1_Init(void)
+{
+
+  /* USER CODE BEGIN ADC1_Init 0 */
+
+  /* USER CODE END ADC1_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC1_Init 1 */
+
+  /* USER CODE END ADC1_Init 1 */
+
+  /** Common config
+  */
+  hadc1.Instance = ADC1;
+  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
+  hadc1.Init.ContinuousConvMode = ENABLE;
+  hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc1.Init.NbrOfConversion = 1;
+  if (HAL_ADC_Init(&hadc1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure Regular Channel
+  */
+  sConfig.Channel = ADC_CHANNEL_0;
+  sConfig.Rank = ADC_REGULAR_RANK_1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC1_Init 2 */
+
+  /* USER CODE END ADC1_Init 2 */
+
+}
+
+void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(adcHandle->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspInit 0 */
+
+  /* USER CODE END ADC1_MspInit 0 */
+    /* ADC1 clock enable */
+    __HAL_RCC_ADC1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**ADC1 GPIO Configuration
+    PA0-WKUP     ------> ADC1_IN0
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_0;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+    /* ADC1 DMA Init */
+    /* ADC1 Init */
+    hdma_adc1.Instance = DMA1_Channel1;
+    hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
+    hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
+    hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+    hdma_adc1.Init.Mode = DMA_NORMAL;
+    hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
+    if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(adcHandle,DMA_Handle,hdma_adc1);
+
+  /* USER CODE BEGIN ADC1_MspInit 1 */
+
+  /* USER CODE END ADC1_MspInit 1 */
+  }
+}
+
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
+{
+
+  if(adcHandle->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspDeInit 0 */
+
+  /* USER CODE END ADC1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_ADC1_CLK_DISABLE();
+
+    /**ADC1 GPIO Configuration
+    PA0-WKUP     ------> ADC1_IN0
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0);
+
+    /* ADC1 DMA DeInit */
+    HAL_DMA_DeInit(adcHandle->DMA_Handle);
+  /* USER CODE BEGIN ADC1_MspDeInit 1 */
+
+  /* USER CODE END ADC1_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

diode_tester/Core/Src/dma.c

@@ -0,0 +1,55 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    dma.c
+  * @brief   This file provides code for the configuration
+  *          of all the requested memory to memory DMA transfers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "dma.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure DMA                                                              */
+/*----------------------------------------------------------------------------*/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+  * Enable DMA controller clock
+  */
+void MX_DMA_Init(void)
+{
+
+  /* DMA controller clock enable */
+  __HAL_RCC_DMA1_CLK_ENABLE();
+
+  /* DMA interrupt init */
+  /* DMA1_Channel1_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */
+

diode_tester/Core/Src/gpio.c

@@ -0,0 +1,102 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    gpio.c
+  * @brief   This file provides code for the configuration
+  *          of all used GPIO pins.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "gpio.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure GPIO                                                             */
+/*----------------------------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/** Configure pins as
+        * Analog
+        * Input
+        * Output
+        * EVENT_OUT
+        * EXTI
+*/
+void MX_GPIO_Init(void)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, PhaseAHi_Pin|PhaseALo_Pin|PhaseBHi_Pin|PhaseBLo_Pin
+                          |PhaseAHiSignal_Pin|PhaseALoSignal_Pin|PhaseBHiSignal_Pin|PhaseBLoSignal_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin : PC13 */
+  GPIO_InitStruct.Pin = GPIO_PIN_13;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PC14 */
+  GPIO_InitStruct.Pin = GPIO_PIN_14;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PAPin PAPin PAPin PAPin */
+  GPIO_InitStruct.Pin = PhaseAHiResponse_Pin|PhaseALoResponse_Pin|PhaseBHiResponse_Pin|PhaseBLoResponse_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /*Configure GPIO pins : PBPin PBPin PBPin PBPin
+                           PBPin PBPin PBPin PBPin */
+  GPIO_InitStruct.Pin = PhaseAHi_Pin|PhaseALo_Pin|PhaseBHi_Pin|PhaseBLo_Pin
+                          |PhaseAHiSignal_Pin|PhaseALoSignal_Pin|PhaseBHiSignal_Pin|PhaseBLoSignal_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* EXTI interrupt init*/
+  HAL_NVIC_SetPriority(EXTI3_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(EXTI3_IRQn);
+
+  HAL_NVIC_SetPriority(EXTI4_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(EXTI4_IRQn);
+
+  HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */

diode_tester/Core/Src/main.c

@@ -0,0 +1,204 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "adc.h"
+#include "dma.h"
+#include "tim.h"
+#include "usart.h"
+#include "gpio.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+#include "rs_message.h"
+#include "tester_main.h"
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+int delay = 250;
+int delay_en = 1;
+int before_pulse_delay = 50;
+int pulse_delay = 10;
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_DMA_Init();
+  MX_ADC1_Init();
+  MX_TIM3_Init();
+  MX_USART1_UART_Init();
+  MX_TIM2_Init();
+  /* USER CODE BEGIN 2 */
+//  HAL_ADC_Start_DMA(&hadc1, (uint32_t *)buff, ADC_BUFF_SIZE);
+//  HAL_TIM_Base_Start_IT(&htim3);
+  TESTER_Init(&TESTER);
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  TESTER_pre_while(&TESTER);
+  while (1)
+  {
+    TESTER_main_delay(&TESTER);
+    TESTER_main_while(&TESTER);
+    
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
+  PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+  __disable_irq();
+  while (1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

diode_tester/Core/Src/stm32f1xx_hal_msp.c

@@ -0,0 +1,87 @@
+
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32f1xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_AFIO_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
+  */
+  __HAL_AFIO_REMAP_SWJ_NOJTAG();
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

diode_tester/Core/Src/stm32f1xx_it.c

@@ -0,0 +1,328 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f1xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+#include "tester_main.h"
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_adc1;
+extern TIM_HandleTypeDef htim2;
+extern TIM_HandleTypeDef htim3;
+extern UART_HandleTypeDef huart1;
+/* USER CODE BEGIN EV */
+
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M3 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+   while (1)
+  {
+  }
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Prefetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+  TESTER_InterfaceHandle(&TESTER);
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F1xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f1xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles EXTI line3 interrupt.
+  */
+void EXTI3_IRQHandler(void)
+{
+  /* USER CODE BEGIN EXTI3_IRQn 0 */
+  __disable_irq();
+  
+  HAL_GPIO_TogglePin(PhaseAHiSignal_GPIO_Port, PhaseAHiSignal_Pin);
+  
+  __enable_irq();
+  /* USER CODE END EXTI3_IRQn 0 */
+  HAL_GPIO_EXTI_IRQHandler(PhaseAHiResponse_Pin);
+  /* USER CODE BEGIN EXTI3_IRQn 1 */
+
+  /* USER CODE END EXTI3_IRQn 1 */
+}
+
+/**
+  * @brief This function handles EXTI line4 interrupt.
+  */
+void EXTI4_IRQHandler(void)
+{
+  /* USER CODE BEGIN EXTI4_IRQn 0 */
+  __disable_irq();
+  
+  HAL_GPIO_TogglePin(PhaseALoSignal_GPIO_Port, PhaseALoSignal_Pin);
+  
+  __enable_irq();
+  /* USER CODE END EXTI4_IRQn 0 */
+  HAL_GPIO_EXTI_IRQHandler(PhaseALoResponse_Pin);
+  /* USER CODE BEGIN EXTI4_IRQn 1 */
+
+  /* USER CODE END EXTI4_IRQn 1 */
+}
+
+/**
+  * @brief This function handles DMA1 channel1 global interrupt.
+  */
+void DMA1_Channel1_IRQHandler(void)
+{
+  /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
+  ADC_DMA_Handler(&tester_adc);
+  /* USER CODE END DMA1_Channel1_IRQn 0 */
+  HAL_DMA_IRQHandler(&hdma_adc1);
+  /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
+
+  /* USER CODE END DMA1_Channel1_IRQn 1 */
+}
+
+/**
+  * @brief This function handles EXTI line[9:5] interrupts.
+  */
+void EXTI9_5_IRQHandler(void)
+{
+  /* USER CODE BEGIN EXTI9_5_IRQn 0 */
+  __disable_irq();
+  
+  if (__HAL_GPIO_EXTI_GET_IT(PhaseBHiResponse_Pin) != 0x00u)
+    HAL_GPIO_TogglePin(PhaseBHiSignal_GPIO_Port, PhaseBHiSignal_Pin);
+  if (__HAL_GPIO_EXTI_GET_IT(PhaseBLoResponse_Pin) != 0x00u)
+    HAL_GPIO_TogglePin(PhaseBLoSignal_GPIO_Port, PhaseBLoSignal_Pin);
+  
+  __enable_irq();
+  /* USER CODE END EXTI9_5_IRQn 0 */
+  HAL_GPIO_EXTI_IRQHandler(PhaseBHiResponse_Pin);
+  HAL_GPIO_EXTI_IRQHandler(PhaseBLoResponse_Pin);
+  /* USER CODE BEGIN EXTI9_5_IRQn 1 */
+
+  /* USER CODE END EXTI9_5_IRQn 1 */
+}
+
+/**
+  * @brief This function handles TIM2 global interrupt.
+  */
+void TIM2_IRQHandler(void)
+{
+  /* USER CODE BEGIN TIM2_IRQn 0 */
+	Trace_MB_TIM_Enter();
+	RS_TIM_Handler(&hmodbus1);
+	Trace_MB_TIM_Exit();
+  return;
+  /* USER CODE END TIM2_IRQn 0 */
+  HAL_TIM_IRQHandler(&htim2);
+  /* USER CODE BEGIN TIM2_IRQn 1 */
+
+  /* USER CODE END TIM2_IRQn 1 */
+}
+
+/**
+  * @brief This function handles TIM3 global interrupt.
+  */
+void TIM3_IRQHandler(void)
+{
+  /* USER CODE BEGIN TIM3_IRQn 0 */
+  
+  /* USER CODE END TIM3_IRQn 0 */
+  HAL_TIM_IRQHandler(&htim3);
+  /* USER CODE BEGIN TIM3_IRQn 1 */
+
+  /* USER CODE END TIM3_IRQn 1 */
+}
+
+/**
+  * @brief This function handles USART1 global interrupt.
+  */
+void USART1_IRQHandler(void)
+{
+  /* USER CODE BEGIN USART1_IRQn 0 */
+	Trace_MB_UART_Enter();
+	RS_UART_Handler(&hmodbus1);
+	Trace_MB_UART_Exit();
+  return;
+  /* USER CODE END USART1_IRQn 0 */
+  HAL_UART_IRQHandler(&huart1);
+  /* USER CODE BEGIN USART1_IRQn 1 */
+
+  /* USER CODE END USART1_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

diode_tester/Core/Src/system_stm32f1xx.c

@@ -0,0 +1,406 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f1xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f1xx_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
+  *    the product used), refer to "HSE_VALUE". 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017-2021 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f1xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Defines
+  * @{
+  */
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE               8000000U /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE               8000000U /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM  */ 
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Uncomment the following line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+/* #define USER_VECT_TAB_ADDRESS */
+
+#if defined(USER_VECT_TAB_ADDRESS)
+/*!< Uncomment the following line if you need to relocate your vector Table
+     in Sram else user remap will be done in Flash. */
+/* #define VECT_TAB_SRAM */
+#if defined(VECT_TAB_SRAM)
+#define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#endif /* VECT_TAB_SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Variables
+  * @{
+  */
+
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 8000000;
+const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8U] =  {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+  /* Configure the Vector Table location -------------------------------------*/
+#if defined(USER_VECT_TAB_ADDRESS)
+  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#endif /* USER_VECT_TAB_ADDRESS */
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depending on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE)
+  uint32_t prediv1factor = 0U;
+#endif /* STM32F100xB or STM32F100xE */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00U:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04U:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08U:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#if !defined(STM32F105xC) && !defined(STM32F107xC)      
+      pllmull = ( pllmull >> 18U) + 2U;
+      
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {
+ #if defined(STM32F100xB) || defined(STM32F100xE)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18U;
+      
+      if (pllmull != 0x0DU)
+      {
+         pllmull += 2U;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13U / 2U; 
+      }
+            
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+        
+        if (prediv1source == 0U)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F105xC */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f1xx.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f1xx_xx.s/.c before jump to main.
+  *         This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+  __IO uint32_t tmpreg;
+  /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+    required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114U;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+  RCC->APB2ENR = 0x000001E0U;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
+
+  (void)(tmpreg);
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BBU;  
+  GPIOD->CRH = 0xBBBBBBBBU;
+
+  GPIOE->CRL = 0xB44444BBU;  
+  GPIOE->CRH = 0xBBBBBBBBU;
+
+  GPIOF->CRL = 0x44BBBBBBU;  
+  GPIOF->CRH = 0xBBBB4444U;
+
+  GPIOG->CRL = 0x44BBBBBBU;  
+  GPIOG->CRH = 0x444B4B44U;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4U] = 0x00001091U;
+  FSMC_Bank1->BTCR[5U] = 0x00110212U;
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */

diode_tester/Core/Src/tim.c

@@ -0,0 +1,181 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    tim.c
+  * @brief   This file provides code for the configuration
+  *          of the TIM instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "tim.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+TIM_HandleTypeDef htim2;
+TIM_HandleTypeDef htim3;
+
+/* TIM2 init function */
+void MX_TIM2_Init(void)
+{
+
+  /* USER CODE BEGIN TIM2_Init 0 */
+
+  /* USER CODE END TIM2_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+  /* USER CODE BEGIN TIM2_Init 1 */
+
+  /* USER CODE END TIM2_Init 1 */
+  htim2.Instance = TIM2;
+  htim2.Init.Prescaler = 0;
+  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim2.Init.Period = 65535;
+  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM2_Init 2 */
+
+  /* USER CODE END TIM2_Init 2 */
+
+}
+/* TIM3 init function */
+void MX_TIM3_Init(void)
+{
+
+  /* USER CODE BEGIN TIM3_Init 0 */
+
+  /* USER CODE END TIM3_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+  /* USER CODE BEGIN TIM3_Init 1 */
+
+  /* USER CODE END TIM3_Init 1 */
+  htim3.Instance = TIM3;
+  htim3.Init.Prescaler = 72-1;
+  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim3.Init.Period = 65535;
+  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM3_Init 2 */
+
+  /* USER CODE END TIM3_Init 2 */
+
+}
+
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM2)
+  {
+  /* USER CODE BEGIN TIM2_MspInit 0 */
+
+  /* USER CODE END TIM2_MspInit 0 */
+    /* TIM2 clock enable */
+    __HAL_RCC_TIM2_CLK_ENABLE();
+
+    /* TIM2 interrupt Init */
+    HAL_NVIC_SetPriority(TIM2_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(TIM2_IRQn);
+  /* USER CODE BEGIN TIM2_MspInit 1 */
+
+  /* USER CODE END TIM2_MspInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspInit 0 */
+
+  /* USER CODE END TIM3_MspInit 0 */
+    /* TIM3 clock enable */
+    __HAL_RCC_TIM3_CLK_ENABLE();
+
+    /* TIM3 interrupt Init */
+    HAL_NVIC_SetPriority(TIM3_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(TIM3_IRQn);
+  /* USER CODE BEGIN TIM3_MspInit 1 */
+
+  /* USER CODE END TIM3_MspInit 1 */
+  }
+}
+
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM2)
+  {
+  /* USER CODE BEGIN TIM2_MspDeInit 0 */
+
+  /* USER CODE END TIM2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM2_CLK_DISABLE();
+
+    /* TIM2 interrupt Deinit */
+    HAL_NVIC_DisableIRQ(TIM2_IRQn);
+  /* USER CODE BEGIN TIM2_MspDeInit 1 */
+
+  /* USER CODE END TIM2_MspDeInit 1 */
+  }
+  else if(tim_baseHandle->Instance==TIM3)
+  {
+  /* USER CODE BEGIN TIM3_MspDeInit 0 */
+
+  /* USER CODE END TIM3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM3_CLK_DISABLE();
+
+    /* TIM3 interrupt Deinit */
+    HAL_NVIC_DisableIRQ(TIM3_IRQn);
+  /* USER CODE BEGIN TIM3_MspDeInit 1 */
+
+  /* USER CODE END TIM3_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

diode_tester/Core/Src/usart.c

@@ -0,0 +1,122 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usart.c
+  * @brief   This file provides code for the configuration
+  *          of the USART instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "usart.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+UART_HandleTypeDef huart1;
+
+/* USART1 init function */
+
+void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(uartHandle->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspInit 0 */
+
+  /* USER CODE END USART1_MspInit 0 */
+    /* USART1 clock enable */
+    __HAL_RCC_USART1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**USART1 GPIO Configuration
+    PA9     ------> USART1_TX
+    PA10     ------> USART1_RX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_9;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_10;
+    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+    /* USART1 interrupt Init */
+    HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
+    HAL_NVIC_EnableIRQ(USART1_IRQn);
+  /* USER CODE BEGIN USART1_MspInit 1 */
+
+  /* USER CODE END USART1_MspInit 1 */
+  }
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
+{
+
+  if(uartHandle->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspDeInit 0 */
+
+  /* USER CODE END USART1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART1_CLK_DISABLE();
+
+    /**USART1 GPIO Configuration
+    PA9     ------> USART1_TX
+    PA10     ------> USART1_RX
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
+
+    /* USART1 interrupt Deinit */
+    HAL_NVIC_DisableIRQ(USART1_IRQn);
+  /* USER CODE BEGIN USART1_MspDeInit 1 */
+
+  /* USER CODE END USART1_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

diode_tester/Core/Tester_main/tester_adc_func.c

@@ -0,0 +1,361 @@
+#include "tester_adc_func.h"
+#include "adc.h"
+
+TESTER_ADCTypeDef tester_adc = {0};
+
+uint16_t ADC_DMA_Buff[ADC_DMA_BUFF_SIZE];
+uint16_t ADC_DMA_HalfBuff[ADC_DMA_BUFF_SIZE/2];
+
+void ADC_DMA_Handler(TESTER_ADCTypeDef *adc)
+{
+  int flag_parse_dma = 0;
+  int buff_start_ind = 0;
+  int buff_end_ind = 0;    
+  
+  if(adc->f.dmaHandlerbusy)
+    return;
+  
+  
+  
+  adc->f.dmaHandlerbusy = 1;    
+  __disable_irq();
+  
+  if(DMA1->ISR & DMA_FLAG_HT1)
+  {
+    memcpy(ADC_DMA_HalfBuff, ADC_DMA_Buff, sizeof(ADC_DMA_HalfBuff));
+    
+    adc->f.dmaBufferHalfDone = 1;
+    
+    buff_start_ind = 0;
+    buff_end_ind = ADC_BUFF_SIZE/2;
+    flag_parse_dma = 1;
+  }
+  else if (DMA1->ISR & DMA_FLAG_TC1)
+  {
+    memcpy(ADC_DMA_HalfBuff, (ADC_DMA_Buff+ADC_DMA_BUFF_SIZE/2), sizeof(ADC_DMA_HalfBuff));
+    
+    
+    adc->f.dmaBufferHalfDone = 2;
+    
+    buff_start_ind = ADC_BUFF_SIZE/2;
+    buff_end_ind = ADC_BUFF_SIZE;
+    flag_parse_dma = 1;
+  }
+  else
+  {
+    flag_parse_dma = 0;
+    TrackerCnt_Warn(adc->adc_err);
+  }  
+  
+  __enable_irq();
+  if(adc->f.enable_dmaBuffTransfer && flag_parse_dma)
+  {
+    int dma_ind = 0;
+    for(int buff_ind = buff_start_ind; 
+        buff_ind < buff_end_ind; 
+        buff_ind++)
+    {
+      
+      
+      adc->chAdc.ADC_Buff[buff_ind] = ADC_DMA_HalfBuff[dma_ind];
+      
+      dma_ind += 1;
+    }
+    
+    printf_adc_it("\n%d: ADC DMA IT Done %d-half", uwTick, adc->f.dmaBufferHalfDone);
+    adc->f.dmaHandlerbusy = 0;
+    TrackerCnt_Ok(adc->adc_err);
+  }
+  else
+  {
+    TrackerCnt_Warn(adc->adc_err);
+  }  
+}
+
+
+void TESTER_ADC_StructInit(TESTER_ADCTypeDef *adc)
+{
+  ClearStruct(*adc);
+  adc->hadc = &hadc1;
+}
+
+void TESTER_ADC_UpdateSettings(TESTER_ADCTypeDef *adc, MB_DataStructureTypeDef *mbdata)
+{
+  adc->chAdc.s.ADC_calibr = mbdata->HoldRegs.Adc_CalibrValue;
+  adc->chAdc.s.ADC_zero = mbdata->HoldRegs.Adc_ZeroValue;
+  adc->chAdc.s.expected_pulse_sign = mbdata->HoldRegs.Adc_PulseSign;
+  adc->chAdc.s.pulse_width = mbdata->HoldRegs.Adc_PulseWidth;
+  
+  adc->chAdc.s.U_step = ((float)mbdata->HoldRegs.Adc_U_Calibr/1000)/(adc->chAdc.s.ADC_calibr - adc->chAdc.s.ADC_zero);
+}
+
+HAL_StatusTypeDef ADC_DMA_StartRead(TESTER_ADCTypeDef *adc)
+{
+  HAL_StatusTypeDef res;
+  
+  if(adc->f.adc_running)
+    return HAL_BUSY;
+  
+  /* Очистка флага какая половина DMA уже готова */
+  adc->f.dmaBufferHalfDone = 0; // никакая, данные DMA пока не готовы в принципе
+  
+  /* Разрешение заполнения буферов каналов */
+  adc->f.enable_dmaBuffTransfer = 1;
+  /* Выставления флага, что АЦП работает */
+  adc->f.adc_running = 1;
+
+  printf_adc("\n%d: ADC DMA Start", uwTick);
+
+  /* Старт АЦП с DMA */
+  res = HAL_ADC_Start_DMA(adc->hadc, (uint32_t *)ADC_DMA_Buff, ADC_DMA_BUFF_SIZE);
+  
+  /* Если старт неудачен - запрет заполнения буферов каналов */
+  if(res != HAL_OK)
+  {
+    adc->f.enable_dmaBuffTransfer = 0;
+    adc->f.adc_running = 0;
+  }
+  
+  return res;
+}
+
+HAL_StatusTypeDef ADC_DMA_StopRead(TESTER_ADCTypeDef *adc)
+{
+  HAL_StatusTypeDef res;
+  if(adc->f.adc_running)
+  {
+    /* Остановка АЦП */
+    res = HAL_ADC_Stop_DMA(adc->hadc);
+    
+    /* Очищение флагов АЦП */
+    adc->f.adc_running = 0;
+    adc->f.enable_dmaBuffTransfer = 0;
+    adc->f.dmaHandlerbusy = 0;
+   
+
+    printf_adc("\n%d: ADC DMA Stop", uwTick);
+  }
+  
+  return res;
+}
+
+void ADC_DMA_Fuel_Cell_Reset(TESTER_ADCChannelTypeDef *adc_fc)
+{
+  adc_fc->ADC_Filtered = 0;
+  adc_fc->ADC_Max = 0;
+  adc_fc->ADC_Min = 0;
+  adc_fc->pulse_peak_ind = 0;
+  adc_fc->state = 0;
+}
+
+void ADC_DMA_Channels_Prepare(TESTER_ADCChannelTypeDef *adc_fuel_cells, uint8_t MaskForChannels, uint8_t state)
+{
+  for(int i = 0; i < 4; i++)
+  {
+    if(MaskForChannels&(1<<i))
+    {
+      ADC_DMA_Fuel_Cell_Reset(&adc_fuel_cells[i]);
+      adc_fuel_cells[i].state = state;
+    }
+  }
+}
+
+
+void ADC_DMA_ProcessBufferForPeak(TESTER_ADCChannelTypeDef *adc_fc)
+{
+  uint16_t tmp_val = 0;
+  uint32_t val_sum = 0;  
+  
+  adc_fc->ADC_Max = 0;
+  adc_fc->ADC_Min = 0xFFFF;
+  
+  /* Просмотр стабильных значений в буфере */
+  for(int i = 0; i < ADC_BUFF_SIZE; i++)
+  {    
+    tmp_val = adc_fc->ADC_Buff[i];
+    /* Обновление максимального значения */
+    if(tmp_val > adc_fc->ADC_Max)
+    {
+      adc_fc->ADC_Max = tmp_val;
+      
+      if(adc_fc->s.expected_pulse_sign == 0)
+        adc_fc->pulse_peak_ind = i;
+    }
+    
+    /* Обновление минимального значения */
+    if(tmp_val < adc_fc->ADC_Min)
+    {
+      adc_fc->ADC_Min = tmp_val;
+      adc_fc->pulse_peak_ind = i;
+      
+      if(adc_fc->s.expected_pulse_sign == 1)
+        adc_fc->pulse_peak_ind = i;
+    }
+    
+  }
+  
+  
+  /* Расчет среднего значения в пике */
+  for(int i = (adc_fc->pulse_peak_ind - adc_fc->s.pulse_width/2); i < (adc_fc->pulse_peak_ind + adc_fc->s.pulse_width/2); i++)
+  {
+    tmp_val = adc_fc->ADC_Buff[i];
+    /* Накопление значений для расчета среднего */
+    val_sum += tmp_val;
+  }  
+  adc_fc->ADC_Filtered = val_sum/(adc_fc->s.pulse_width);
+  
+  adc_fc->U_Current = adc_fc->s.U_step*adc_fc->ADC_Filtered;
+  
+}
+
+
+/**
+  * @brief    Считать буфер DMA и найти в нем пик (скачок напряжения)
+  * @details  Основа функции взята из МЗКТЭ. Здесь немного неоптимизированная: 
+  *           в while(1) просто ждеться когда DMA не будет заполнен, 
+  *           потом можно будет сделать какую-то обработку пока он заполняется, чтобы не простаивать.
+  */
+HAL_StatusTypeDef ADC_DMA_ReadForPeak(TESTER_ADCTypeDef *adc, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+  
+  /* Проверка принятых параметров функции */
+  if(adc == 0)
+  {
+    ADC_DMA_StopRead(adc);
+    
+    printf_adc_err("\n%d: Error ADC: Handle is NULL)", uwTick);
+    return HAL_ERROR;
+  }
+  if(Timeout == 0)
+  {
+    ADC_DMA_StopRead(adc);
+    
+    printf_adc_err("\n%d: Error ADC: Read timeout is NULL)", uwTick);
+    return HAL_ERROR;
+  }
+  
+
+  int adc_buff_ind = 1;
+  uint16_t filter_halfend = ADC_BUFF_SIZE/2;
+  uint16_t filter_end = ADC_BUFF_SIZE;
+  uint8_t run_adc_check = 0;
+  uint8_t expected_dmaBufferHalf = 2;
+  
+  /* Обработка АЦП */
+  while(1)
+  {
+    /* Проверка на таймаут */
+    if(HAL_GetTick() - tickstart > Timeout)
+    {
+      ADC_DMA_StopRead(adc);
+
+      printf_adc_err("\n%d: Error ADC: Stable Not Found (Timeout)", uwTick);
+      return HAL_TIMEOUT;
+    }
+    
+    
+    /* Запуск обработки данных из DMA буфера, когда они готовы */
+    if( (expected_dmaBufferHalf == adc->f.dmaBufferHalfDone) && // Ожидаемая половина DMA буфера готова
+        (run_adc_check == 0))                                 // Обработка предыдущей половины не активна
+    {
+      run_adc_check = 1;
+
+      if(adc->f.dmaBufferHalfDone == 1)
+        printf_adc_processing("\n%d: ADC Processing DMA start...", uwTick);
+      else if(adc->f.dmaBufferHalfDone == 2)
+        printf_adc_processing("\n%d: ADC Processing DMA 2-half start...", uwTick);
+
+    }
+    
+    
+    /* Обработка буфера DMA */
+    if(run_adc_check)
+    { 
+      /* Вызов обработчиков буфера DMA для каждого канала, если он выбран */
+//      ADC_DMA_BufferHandler(&adc->chAdc, &adc->filter, adc_buff_ind);
+      
+      
+      
+      /* Переход на следующие во времени значения каналов АЦП */
+//      adc_buff_ind++;      
+      /* если это первая половина DMA буфера */
+      if(expected_dmaBufferHalf == 1) 
+      {
+        if(adc_buff_ind > filter_halfend)   // Проверка первой половины закончена
+        {
+          adc_buff_ind = filter_halfend;    // Выставляем индекс на вторую половину
+          run_adc_check = 0;                // Сбрасываем флаг проверки каналов
+          expected_dmaBufferHalf = 2;       // Устанавливаем ожидание готовности второй половины данных DMA буфера
+
+          printf_adc_processing("\n%d: ADC Processing 1-half DMA complete, wait for 2-half...", uwTick);
+
+        }
+      }
+      /* если это вторая половина DMA буфера */
+      else if(expected_dmaBufferHalf == 2)
+      {
+        /* Если АЦП работает - останавливаем его */
+        // note: пока без кольцевого режима, если за один цикл буфера ничего не удалось словить, вряд ли далее что-то появиться??
+        if(adc->f.adc_running)
+        {
+          ADC_DMA_StopRead(adc);
+          printf_adc_processing(": wait for processing complete...");
+        }
+        
+//        if(adc_buff_ind > filter_end)       // Проверка первой половины закончена
+//        {
+          adc_buff_ind = 0;                 // Выставляем индекс на первую половину
+          run_adc_check = 0;                // Сбрасываем флаг проверки каналов
+          expected_dmaBufferHalf = 1;       // Устанавливаем ожидание готовности первой половины данных DMA буфера
+
+          printf_adc_processing("\n%d: ADC Processing DMA complete", uwTick);
+          break;
+//        }
+      }
+      /* если это "никакая" половина DMA буфера */
+      else
+      { /* Сброс всего */
+
+        printf_adc_err("\n%d: ADC Processing DMA unexcpected half", uwTick);
+
+        adc_buff_ind = 0;
+        run_adc_check = 0;
+        expected_dmaBufferHalf = 1;
+      }
+    }
+  }
+  
+  ADC_DMA_ProcessBufferForPeak(&adc->chAdc);
+  
+  return HAL_OK;
+}
+
+
+/**
+  * @brief    Считывать АЦП, который работает в континуес режиме
+  */
+HAL_StatusTypeDef ADC_ReadContinuous(TESTER_ADCTypeDef *adc, uint32_t buff_size, uint32_t tickstart, uint32_t timeout)
+{
+  HAL_StatusTypeDef res = HAL_OK;
+  uint16_t val_sum = 0;
+  if(buff_size == 0)
+    return HAL_ERROR;
+  int i = 0;
+  for(i = 0; i < buff_size; i++)
+  {
+    if(HAL_GetTick() - tickstart > timeout)
+    {
+      res = HAL_TIMEOUT;
+      return res;
+    }
+    
+    HAL_ADC_PollForConversion(adc->hadc, 1);
+    adc->chAdc.ADC_Buff[i] = HAL_ADC_GetValue(adc->hadc);
+    val_sum += adc->chAdc.ADC_Buff[i];
+  }
+  
+  adc->chAdc.ADC_Filtered = val_sum/(i);  
+  adc->chAdc.U_Current = adc->chAdc.s.U_step*adc->chAdc.ADC_Filtered;
+  return res;
+}

diode_tester/Core/Tester_main/tester_adc_func.h

@@ -0,0 +1,113 @@
+/**
+**************************************************************************
+* @file tester_func.h
+* @brief Заголовочный файл для функций МЗКТ.
+**************************************************************************
+@details
+
+*************************************************************************/
+
+	
+#ifndef _TESTER_ADC_FUNC_H_
+#define _TESTER_ADC_FUNC_H_
+
+#include "mylibs_include.h"
+
+typedef uint16_t ADC_BuffTypeDef[ADC_BUFF_SIZE];
+
+typedef enum
+{
+  ADC_DISABLED              = 0,
+  WAIT_FOR_FIRST_HALF       = 1,
+  PROCESSING_FIRST_HALF     = 2,
+  WAIT_FOR_SECOND_HALF      = 3,
+  PROCESSING_SECOND_HALF    = 4,
+  ADC_DONE                  = 5,
+}ADC_ChannelState;
+
+typedef struct
+{
+  uint16_t        ADC_zero;
+  uint16_t        ADC_calibr;
+  float           U_step;
+  unsigned        pulse_width; 
+  unsigned        expected_pulse_sign; 
+}ADC_ParamsTypeDef;
+typedef struct
+{  
+  float           U_Current;
+  uint16_t        ADC_Filtered; 
+  ADC_BuffTypeDef ADC_Buff;
+  
+  uint16_t        ADC_Max;
+  uint16_t        ADC_Min;
+  unsigned        pulse_peak_ind; 
+  
+  
+  /* Parameter for calc voltage */
+  ADC_ParamsTypeDef s;
+  
+   
+  
+  ADC_ChannelState state;
+  
+  ADCChannel_TrackerTypeDef   adc_ch_err;
+}TESTER_ADCChannelTypeDef;
+
+typedef struct
+{
+  TESTER_ADCChannelTypeDef chAdc;
+  
+  ADC_HandleTypeDef *hadc; 
+
+//  TESTER_ADCFilterTypeDef filter;
+  
+  struct
+  {
+    
+    unsigned adc_running:1;
+    unsigned enable_dmaBuffTransfer:1;
+    unsigned dmaBufferHalfDone:2;
+    unsigned dmaHandlerbusy:1;
+  }f;
+  ADC_TrackerTypeDef adc_err;
+}TESTER_ADCTypeDef;
+
+
+extern TESTER_ADCTypeDef tester_adc;
+extern uint16_t ADC_DMA_Buff[ADC_DMA_BUFF_SIZE];
+extern uint16_t ADC_DMA_HalfBuff[ADC_DMA_BUFF_SIZE/2];
+
+void TESTER_ADC_StructInit(TESTER_ADCTypeDef *adc);
+
+void TESTER_ADC_UpdateSettings(TESTER_ADCTypeDef *adc, MB_DataStructureTypeDef *mbdata);
+void ADC_DMA_Handler(TESTER_ADCTypeDef *adc);
+
+void ADC_DMA_ProcessBufferForPeak(TESTER_ADCChannelTypeDef *adc_fc);
+void ADC_DMA_Channels_Prepare(TESTER_ADCChannelTypeDef *adc_fuel_cells, uint8_t MaskForChannels, uint8_t state);
+HAL_StatusTypeDef ADC_DMA_StartRead(TESTER_ADCTypeDef *adc);
+/* Считать буфер DMA и найти в нем пик (скачок напряжения) */
+HAL_StatusTypeDef ADC_DMA_ReadForPeak(TESTER_ADCTypeDef *adc, uint32_t Timeout);
+/* Считывать АЦП, который работает в континуес режиме */
+HAL_StatusTypeDef ADC_ReadContinuous(TESTER_ADCTypeDef *adc, uint32_t buff_size, uint32_t tickstart, uint32_t timeout);
+
+#ifndef printf_adc_result
+#define printf_adc_result(...)
+#endif
+#ifndef printf_adc_processing
+#define printf_adc_processing(...)
+#endif
+
+#ifndef printf_adc_err
+#define printf_adc_err(...)
+#endif
+
+#ifndef printf_adc_it
+#define printf_adc_it(...)
+#endif
+
+#ifndef printf_adc
+#define printf_adc(...)
+#endif
+#endif //_TESTER_ADC_FUNC_H_
+

diode_tester/Core/Tester_main/tester_config.h

@@ -0,0 +1,161 @@
+/**
+**************************************************************************
+* @file tester_config.h
+* @brief Конфигурации для тестера диодов
+**************************************************************************
+* @defgroup    TESTER_CONFIGS    Configs for project
+* @brief       Конфигурации для тестера диодов
+* @details     
+@{
+*************************************************************************/
+#ifndef _TESTER_CONFIG_H_
+#define _TESTER_CONFIG_H_
+
+
+/** 
+	* @addtogroup TESTER_SW_TIMINGS_CONFIG   Configs for switching timings
+	* @ingroup 		TESTER_CONFIGS
+  * @brief      Конфигурации таймингов для ключей питания
+	@{
+	*/
+
+/**
+  * @brief    Задержка (миллисекундная) для положительного напряжения ПО УМОЛЧАНИЮ
+  * @details  Задержка миллисекундная или микросекундная @ref TIME_BEFORE_TEST_MS_DELAY
+  */
+#define DEF_TIME_FOR_FORWARD                100
+#define DEF_TIME_FOR_FORWARD_MS_DELAY       1         ///< включение миллисекундной задержки для @ref DEF_TIME_FOR_FORWARD по умолчанию
+
+/**
+  * @brief    Задержка перед окончанием тестирования (отключение питания) ПО УМОЛЧАНИЮ
+  * @details  Задержка миллисекундная или микросекундная @ref TIME_FOR_REVERSE_MS_DELAY
+  */
+#define DEF_TIME_FOR_REVERSE                200
+#define DEF_TIME_FOR_REVERSE_MS_DELAY       1         ///< включение миллисекундной задержки для @ref TIME_FOR_REVERSE
+
+/**
+  * @brief    Задержка перед началом тестирования ПО УМОЛЧАНИЮ
+  * @details  Задержка миллисекундная или микросекундная @ref TIME_BEFORE_TEST_MS_DELAY
+  */
+#define DEF_TIME_BEFORE_TEST                500
+#define DEF_TIME_BEFORE_TEST_MS_DELAY       1         ///< включение миллисекундной задержки для @ref TIME_BEFORE_TEST по умолчанию
+
+/**
+  * @brief    Задержка для дедтайма ПО УМОЛЧАНИЮ
+  * @details  Задержка миллисекундная или микросекундная @ref DEF_DEADTIME_MS_DELAY
+  */
+#define DEF_DEADTIME                        0
+#define DEF_DEADTIME_MS_DELAY               0         ///< включение миллисекундной задержки для @ref DEF_DEADTIME по умолчанию
+
+/**
+  * @brief    Задержка между включением АЦП и предполагаемым скачком напряжения ПО УМОЛЧАНИЮ
+  * @details  Задержка нужна, чтобы точно поймать его в буфере АЦП. 
+  *
+  *           Задержка миллисекундная или микросекундная @ref TIME_BEFORE_TEST_MS_DELAY  
+  * @note     Но если миллисекундная, то скорее всего скачок не попадет в буфер АЦП.
+  *           Поэтому желательно только микросекундная (@ref TIME_BEFORE_PEAK_MS_DELAY = 0)
+  */
+#define DEF_TIME_BEFORE_PEAK                5
+#define DEF_TIME_BEFORE_PEAK_MS_DELAY       0         ///< включение миллисекундной задержки для @ref TIME_BEFORE_PEAK
+
+/** TESTER_SW_TIMINGS_CONFIG
+  * @}
+  */
+
+
+/** 
+	* @addtogroup TESTER_INTERFACE_CONFIG   Configs for interface of tester
+	* @ingroup 		TESTER_CONFIGS
+  * @brief      Конфигурации для интерфейса тестера
+	@{
+	*/
+
+/* Дефайны для светодиодов */
+/* Состояния включенного и выключенного светодиода */
+#define LED_ON      0     ///< Состояние включенного светодиода
+#define LED_OFF     1     ///< Состояние выключенного светодиода
+
+#define LED1_Port                       GPIOC         ///< Порт светодиода (при перенастройке надо также перенастроить через cube)
+#define LED1_Pin                        GPIO_PIN_13   ///< Пин светодиода (при перенастройке надо также перенастроить через cube)
+
+/* Периоды моргания светодиода */
+#define LED_FORWARD_DIODE_PERIOD        250           ///< Моргание для индикации подключенного положительного напряжения
+#define LED_REVERSE_DIODE_PERIOD        25            ///< Моргание для индикации подключенного отрицательного напряжения
+#define LED_BLINK_AS_ON                 5             ///< Моргание незаметное для глаза (светодиод просто включен)
+
+
+/* Дефайны для кнопки */
+/* Состояния нажатой и отжатой кнопки */
+#define SW_ON       0     ///< Состояние нажатой кнопки
+#define SW_OFF      1     ///< Состояние отжатой кнопки
+
+/* Пин кнопки при перенастройке надо также перенастроить через cube) */
+#define SWITCH_START_Port               GPIOC         ///< Порт кнокпи старта (при перенастройке надо также перенастроить через cube)
+#define SWITCH_START_Pin                GPIO_PIN_14   ///< Пин кнокпи старта (при перенастройке надо также перенастроить через cube)
+
+/* Задержка для компенсации дребезга (в миллисекундах) */
+#define SWITCH_ANTI_DREBEZG_DELAY       50            ///< Время которое выжидается для окончания дребезга
+
+/** TESTER_INTERFACE_CONFIG
+  * @}
+  */
+
+/** 
+	* @addtogroup TESTER_PHASE_SW_CONFIG   Configs for switches for phases
+	* @ingroup 		TESTER_CONFIGS
+  * @brief      Конфигурации для ключей фаз
+	@{
+	*/
+//#define USE_HAL_GPIO_FUNCTIONS  ///< По этому дефайну для переключения пинов будут использоваться HAL_GPIO функции
+#define RECONNECT_WITHOUT_DEADTIME ///< По этому дефайну дедтайм отключается. Если отключить и USE_HAL_GPIO_FUNCTIONS, то переключатся фазы будут почти синхронно (160 нс)
+  
+/* Состояния ключей для подключения и откючения питания */
+#define PHASE_CONNECT       1   ///< Ключ замкнут подключено в данном состоянии пина
+#define PHASE_DISCONNECT    0   ///< Ключ разомкнут отключено в данном состоянии пина
+
+/* Ключи для прямого включения диода */
+/* (при перенастройке надо также перенастроить через cube) */
+#define SWITCH_PHASES_Port        GPIOB         ///< Порт пина первого ключа для прямого включения диода
+#define SWITCH_PHASE_A_POS_Pin    GPIO_PIN_0    ///< Пин первого ключа для прямого включения диода
+#define SWITCH_PHASE_B_NEG_Pin    GPIO_PIN_1    ///< Пин второго ключа для прямого включения диода
+
+
+/* Ключи для обратного включения диода */
+/* (при перенастройке надо также перенастроить через cube) */
+#define SWITCH_PHASE_A_NEG_Pin    GPIO_PIN_10   ///< Пин первого ключа для обратного включения диода
+#define SWITCH_PHASE_B_POS_Pin    GPIO_PIN_11   ///< Пин первого ключа для обратного включения диода
+
+/** TESTER_PHASE_SW_CONFIG
+  * @}
+  */
+
+/** 
+	* @addtogroup TESTER_ADC_CONFIG   Configs for ADC
+	* @ingroup 		TESTER_CONFIGS
+  * @brief      Конфигурации для АЦП
+	@{
+	*/
+#define TESTER_ADC_PULSE_EXPETCED_WIDTH   4   ///< Предполагаемая длительность пика в отчетах ацп
+#define TESTER_ADC_PULSE_SIGN             0   ///< Полярность импульса 0 - положительная, 1 - отрицательая
+  
+#define ADC_BUFF_SIZE                           (200)               ///< Размер буфера АЦП
+#define ADC_DMA_BUFF_SIZE                       (ADC_BUFF_SIZE)     ///< Размер буфера ДМА (1 канал)
+
+#define ADC_U_CALIBR                            ((float)3.0)        ///< Калибровочное напряжение
+#define ADC_VALUE_CALIBR                        (0xFFF)             ///< Значение АЦП при калибровочном напряжении @ref ADC_U_CALIBR
+#define ADC_VALUE_ZERO                          (0)                 ///< Значение АЦП при нулевом напряжении
+  
+#define ADC_READ_TIMEOUT_MS                     20                  ///< Таймаут на ожидание разрядки конденсатора
+
+
+/** TESTER_ADC_CONFIG
+  * @}
+  */
+
+
+/** TESTER_CONFIGS
+  * @}
+  */
+
+#endif //_TESTER_CONFIG_H_
+

diode_tester/Core/Tester_main/tester_func.c

@@ -0,0 +1,253 @@
+#include "tester_func.h"
+
+TESTER_TestHandleTypeDef hTestDiode;
+
+/**s
+  * @brief    Инициализация хендла тестера диодов
+  */
+void TESTER_HandleInit(TESTER_TestHandleTypeDef *htest, TESTER_LEDsTypeDef *leds)
+{
+  /* Настройка структуры АЦП */
+  htest->adc = &tester_adc;  
+  htest->leds = leds;
+  TESTER_ADC_StructInit(htest->adc);
+    
+  htest->continuous_buff_size = 20;
+}
+
+
+/**
+  * @brief    Тест диодов: подключение прямого напряжения
+  */
+void TESTER_TestDiode_Forward(TESTER_TestHandleTypeDef *htest)
+{
+  /* Отключение питания от диода */
+  TESTER_Disconnect_AllPhases(&htest->SwPhaseReverse, &htest->SwPhaseForward);  
+  /* Очистка буферов каналов */
+  ClearStruct(htest->adc->chAdc.ADC_Buff);
+  
+  /* Задержка, перед началом работы */
+  TESTER_LED_TimeoutForStartTest(&htest->leds->LED1);
+  TESTER_Delay(&htest->SwTimings.ticks_before_test, &hmcstim);
+  TESTER_LED_TestingDiodeForward(&htest->leds->LED1);
+  
+  /* Включение континиус АЦП */
+  HAL_ADC_Start(htest->adc->hadc);  
+  
+  /* Прямое включение диода */
+  TESTER_Connect_Phase(&htest->SwPhaseForward);
+  
+  /* Прямое включение на определенное время */
+  if(htest->SwTimings.ticks_for_forward.msdelay)
+  {
+    uint32_t tickstart = HAL_GetTick();
+    HAL_StatusTypeDef res;
+    while(1)
+    {
+      /* Считывание АЦП пока таймаут истечет */
+      res = ADC_ReadContinuous(htest->adc, htest->continuous_buff_size, tickstart, htest->SwTimings.ticks_for_forward.ticks);
+      
+      if(res != HAL_OK)
+        break;
+    }
+  }
+  else
+  {
+    TESTER_Delay(&htest->SwTimings.ticks_for_forward, &hmcstim);
+  }
+  
+  /* Отключение питания от диода */
+  TESTER_Disconnect_AllPhases(&htest->SwPhaseReverse, &htest->SwPhaseForward);
+  
+  /* Выключение континиус АЦП */
+  HAL_ADC_Stop(htest->adc->hadc);
+  
+  TESTER_LED_WaitForAction(&htest->leds->LED1);  
+  
+  htest->DiodeForwardVolt = htest->adc->chAdc.U_Current;
+}
+
+/**
+  * @brief    Тест диодов: подключение обратного напряжения
+  */
+void TESTER_TestDiode_Reverse(TESTER_TestHandleTypeDef *htest)
+{
+  /* Отключение питания от диода */
+  TESTER_Disconnect_AllPhases(&htest->SwPhaseReverse, &htest->SwPhaseForward);
+  /* Очистка буферов каналов */
+  ClearStruct(htest->adc->chAdc.ADC_Buff);
+  
+  /* Задержка, перед началом работы */
+  TESTER_LED_TimeoutForStartTest(&htest->leds->LED1);
+  TESTER_Delay(&htest->SwTimings.ticks_before_test, &hmcstim);
+  TESTER_LED_TestingDiodeReverse(&htest->leds->LED1);
+  
+  /* Включение АЦП */
+  ADC_DMA_StartRead(htest->adc);
+  
+  /* Задержка, перед предполагаемым скачком */
+  TESTER_Delay(&htest->SwTimings.ticks_before_expected_peak, &hmcstim);
+  
+  /* Обратное включение диода */
+  TESTER_Connect_Phase(&htest->SwPhaseReverse);
+  
+  /* Обратное включение на определенное время */
+  TESTER_Delay(&htest->SwTimings.ticks_for_reverse, &hmcstim);
+  
+  /* Отключение питания от диода */
+  TESTER_Disconnect_AllPhases(&htest->SwPhaseReverse, &htest->SwPhaseForward);
+  
+  /* Обработка DMA */
+  ADC_DMA_ReadForPeak(htest->adc, ADC_READ_TIMEOUT_MS);
+  
+  TESTER_LED_WaitForAction(&htest->leds->LED1);
+  
+  htest->DiodeReversePeakVolt = htest->adc->chAdc.U_Current;  
+}
+
+
+/**
+  * @brief    Тест диодов: подключение прямого, а потом обратного напряжения
+  */
+void TESTER_TestDiode_SwitchConnection(TESTER_TestHandleTypeDef *htest)
+{ 
+  /* Отключение питания от диода */
+  TESTER_Disconnect_AllPhases(&htest->SwPhaseReverse, &htest->SwPhaseForward);
+  /* Очистка буферов каналов */
+  ClearStruct(htest->adc->chAdc.ADC_Buff);
+  
+  /* Задержка, перед началом работы */
+  TESTER_LED_TimeoutForStartTest(&htest->leds->LED1);
+  TESTER_Delay(&htest->SwTimings.ticks_before_test, &hmcstim);
+  TESTER_LED_TestingDiodeForward(&htest->leds->LED1);
+  
+  /* Прямое включение диода */
+  TESTER_Connect_Phase(&htest->SwPhaseForward);
+  
+  /* Прямое включение на определенное время */
+  TESTER_Delay(&htest->SwTimings.ticks_for_forward, &hmcstim);
+  htest->DiodeForwardVolt = htest->adc->chAdc.U_Current;
+  TESTER_LED_TestingDiodeReverse(&htest->leds->LED1);
+    
+  /* Переход из прямого включения в обратное */
+  TESTER_Reconnect_TwoPhases(&htest->SwPhaseForward, &htest->SwPhaseReverse, &htest->SwTimings.ticks_deadtime);
+  
+  /* Обратное включение на определенное время */
+  TESTER_Delay(&htest->SwTimings.ticks_for_reverse, &hmcstim);
+  
+  /* Отключение питания от диода */
+  TESTER_Disconnect_AllPhases(&htest->SwPhaseReverse, &htest->SwPhaseForward);
+  
+  /* Обработка DMA */
+  ADC_DMA_ReadForPeak(htest->adc, ADC_READ_TIMEOUT_MS);
+  
+  TESTER_LED_WaitForAction(&htest->leds->LED1);
+  
+  htest->DiodeReversePeakVolt = htest->adc->chAdc.U_Current;  
+}
+
+
+/**
+  * @brief    Тестирование одного ключа
+  */
+void TESTER_TestOneSwitch(GPIO_TypeDef *SwPort, uint32_t SwPin, uint8_t flag)
+{
+  if(flag)
+  {
+    TESTER_PhaseSwSingle_Set(SwPort, SwPin);
+  }
+  else
+  {
+    TESTER_PhaseSwSingle_Reset(SwPort, SwPin);
+  }
+}
+
+/**
+  * @brief    Подключить фазу с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef
+  */
+void TESTER_Connect_Phase(TESTER_PhaseSwitchTypeDef *PhaseSw)
+{
+  TESTER_PhaseSw_Set(PhaseSw);
+}
+/**
+  * @brief    Отключить фазу с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef
+  */
+void TESTER_Disconnect_Phase(TESTER_PhaseSwitchTypeDef *PhaseSw)
+{
+  TESTER_PhaseSw_Reset(PhaseSw);
+}
+
+/**
+  * @brief    Отключить фазу с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef
+  */
+void TESTER_Disconnect_AllPhases(TESTER_PhaseSwitchTypeDef *SwPhaseA, TESTER_PhaseSwitchTypeDef *SwPhaseB)
+{
+  TESTER_PhaseSw_Reset(SwPhaseA);
+  TESTER_PhaseSw_Reset(SwPhaseB);
+}
+/**
+  * @brief    Переключить две фазы с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef
+  */
+void TESTER_Reconnect_TwoPhases(TESTER_PhaseSwitchTypeDef *SwPhaseA, TESTER_PhaseSwitchTypeDef *SwPhaseB, TESTER_TicksDelayTypeDef *deadtime)
+{
+  /* Если дедтайм меньше 100 мкс, то сначала запускаем АЦП а потом дедтаймим */
+  /* Потому что эта функция по длительности порядка 30 мкс, поэтому дедтайм получается не может быть меньше 30 мкс*/
+  #ifndef RECONNECT_WITHOUT_DEADTIME
+  if(deadtime->msdelay == 0)
+  {
+    if(deadtime->ticks < 100)
+    {
+  #endif //RECONNECT_WITHOUT_DEADTIME
+      /* Включение АЦП */
+      ADC_DMA_StartRead(hTestDiode.adc);
+  
+      /* Ожидается задержка, перед предполагаемым скачком */
+      TESTER_Delay(&hTestDiode.SwTimings.ticks_before_expected_peak, &hmcstim);  
+  #ifndef RECONNECT_WITHOUT_DEADTIME
+    }
+  }
+  #endif //RECONNECT_WITHOUT_DEADTIME
+    
+  TESTER_PhaseSw_Reset(SwPhaseA);
+  
+  #ifndef RECONNECT_WITHOUT_DEADTIME
+  /* Ожидается задержка дедтайм */
+  TESTER_Delay(deadtime, &hmcstim);
+  
+  /* Включение АЦП */
+  ADC_DMA_StartRead(hTestDiode.adc);    
+  
+  /* Ожидается задержка, перед предполагаемым скачком */
+  TESTER_Delay(&hTestDiode.SwTimings.ticks_before_expected_peak, &hmcstim);  
+  #endif //RECONNECT_WITHOUT_DEADTIME
+  
+  
+  TESTER_PhaseSw_Set(SwPhaseB);
+}
+
+
+/**
+* @brief    Формирование задержки (в микро или миллисекундная)
+  */
+void TESTER_Delay(TESTER_TicksDelayTypeDef *tickdelay, TIM_HandleTypeDef *htim)
+{
+  /* если миллисекундная задержка выключена */
+  if(tickdelay->msdelay == 0)
+  {
+    htim->Instance->CNT = 1;
+    uint32_t tickstart = HAL_GetTick();
+    /* Задержка, в мкс */
+    while(htim->Instance->CNT < tickdelay->ticks)
+    {
+      /* Если прошло уже больше секунды, а микросекундная задержка не закончилась - возврат */
+      if(HAL_GetTick() - tickstart > 1000)
+        return;
+    }
+  }
+  /* если миллисекундная задержка включена */
+  else
+  {
+    /* Задержка, в миллисекундах */
+    msDelay(tickdelay->ticks);
+  }
+}

diode_tester/Core/Tester_main/tester_func.h

@@ -0,0 +1,128 @@
+/**
+**************************************************************************
+* @file tester_func.h
+* @brief Заголовочный файл для функций МЗКТ.
+**************************************************************************
+@details
+
+*************************************************************************/
+
+	
+#ifndef _TESTER_FUNC_H_
+#define _TESTER_FUNC_H_
+
+#include "tester_adc_func.h"
+#include "tester_interface_func.h"
+
+/**
+  * @brief Хендл микросекундного таймера
+  */
+#define hmcstim htim3 
+
+
+#ifdef USE_HAL_GPIO_FUNCTIONS
+#define TESTER_PhaseSw_Set(_sw_)      HAL_GPIO_WritePin((_sw_)->SW_Port, (_sw_)->SwHI_Pin | (_sw_)->SwLO_Pin, PHASE_CONNECT)
+#define TESTER_PhaseSw_Reset(_sw_)    HAL_GPIO_WritePin((_sw_)->SW_Port, (_sw_)->SwHI_Pin | (_sw_)->SwLO_Pin, PHASE_DISCONNECT)
+
+#define TESTER_PhaseSwSingle_Set(_swport_, _swpin_)      HAL_GPIO_WritePin((_swport_), (_swpin_), PHASE_CONNECT)
+#define TESTER_PhaseSwSingle_Reset(_swport_, _swpin_)      HAL_GPIO_WritePin((_swport_), (_swpin_), PHASE_DISCONNECT)
+#else //USE_HAL_GPIO_FUNCTIONS
+
+#if (PHASE_CONNECT == 1) && (PHASE_DISCONNECT == 0)
+#define TESTER_PhaseSw_Set(_sw_)      (_sw_)->SW_Port->BSRR = (_sw_)->SwHI_Pin | (_sw_)->SwLO_Pin
+#define TESTER_PhaseSw_Reset(_sw_)    (_sw_)->SW_Port->BSRR = ((_sw_)->SwHI_Pin | (_sw_)->SwLO_Pin) << 16
+
+#define TESTER_PhaseSwSingle_Set(_swport_, _swpin_)     (_swport_)->BSRR = (_swpin_)
+#define TESTER_PhaseSwSingle_Reset(_swport_, _swpin_)   (_swport_)->BSRR = ((_swpin_) << 16)
+#elif (PHASE_CONNECT == 0) && (PHASE_DISCONNECT == 1)
+#define TESTER_PhaseSw_Set(_sw_)      (_sw_)->SW_Port->BSRR = ((_sw_)->SwHI_Pin | _sw_->SwLO_Pin) << 16
+#define TESTER_PhaseSw_Reset(_sw_)    (_sw_)->SW_Port->BSRR = (_sw_)->SwHI_Pin | (_sw_)->SwLO_Pin
+
+#define TESTER_PhaseSwSingle_Set(_swport_, _swpin_)     (_swport_)->BSRR = ((_swpin_) << 16)
+#define TESTER_PhaseSwSingle_Reset(_swport_, _swpin_)   (_swport_)->BSRR = (_swpin_)
+#endif //POWER_CONNECT
+
+#endif //USE_HAL_GPIO_FUNCTIONS
+
+extern TIM_HandleTypeDef htim3;
+
+/**
+  * @brief Структура для пинов, которые отвечают за ключи, которые подключают фазы
+  */
+typedef struct
+{
+  GPIO_TypeDef *SW_Port;      ///< Порт первого ключа для фазы
+  uint32_t      SwHI_Pin;    ///< Пин первого ключа для фазы
+  uint32_t      SwLO_Pin;    ///< Пин второго ключа для фазы
+}TESTER_PhaseSwitchTypeDef;
+
+
+/**
+  * @brief Структура для тайминга с флагом миллисекундой или тиковой (пустой for) задержкой
+  */
+typedef struct
+{
+  unsigned  msdelay:1;
+  uint32_t  ticks;
+}TESTER_TicksDelayTypeDef;
+
+/**
+  * @brief Структура с таймингами для тестера 
+  */
+typedef struct
+{
+  TESTER_TicksDelayTypeDef  ticks_for_forward;          ///< задержка для прямого включения @ref TESTER_TestDiode_Forward
+  TESTER_TicksDelayTypeDef  ticks_for_reverse;          ///< задержка для прямого включения @ref TESTER_TestDiode_Reverse
+  TESTER_TicksDelayTypeDef  ticks_before_test;          ///< задержка перед началом тестирования (мс или мкс)
+  TESTER_TicksDelayTypeDef  ticks_deadtime;             ///< задержка между включением АЦП и предполагаемым скачком напряжения, чтобы точно поймать его в буфере АЦП (мс или мкс)
+  TESTER_TicksDelayTypeDef  ticks_before_expected_peak; ///< задержка между включением АЦП и предполагаемым скачком напряжения, чтобы точно поймать его в буфере АЦП (мс или мкс)
+}TESTER_SwitchTimingsTypeDef;
+
+/**
+  * @brief Структура-дескриптор для управления тестированием диодов
+  */
+typedef struct
+{
+  TESTER_ADCTypeDef *adc;                 ///< указатель на структуру АЦП тестера
+  
+  TESTER_SwitchTimingsTypeDef SwTimings;  ///< Тайминги для ключей
+  
+  TESTER_PhaseSwitchTypeDef SwPhaseForward;      ///< Пины ключей фаз для прямого включения
+  TESTER_PhaseSwitchTypeDef SwPhaseReverse;      ///< Пины ключей фаз для обратного включения
+  
+  uint32_t          continuous_buff_size;
+  
+  float             DiodeForwardVolt;
+  float             DiodeReversePeakVolt;
+  
+  TESTER_LEDsTypeDef *leds;
+}TESTER_TestHandleTypeDef;
+extern TESTER_TestHandleTypeDef hTestDiode;
+
+
+
+/* Инициализация хендла тестера диодов */
+void TESTER_HandleInit(TESTER_TestHandleTypeDef *htest, TESTER_LEDsTypeDef *leds);
+
+/* Тест диодов: подключение прямого напряжения */
+void TESTER_TestDiode_Forward(TESTER_TestHandleTypeDef *htest);
+/* Тест диодов: подключение обратного напряжения */
+void TESTER_TestDiode_Reverse(TESTER_TestHandleTypeDef *htest);
+/* Тест диодов: подключение прямого, а потом обратного напряжения */
+void TESTER_TestDiode_SwitchConnection(TESTER_TestHandleTypeDef *htest);
+
+/* Тестирование одного ключа */
+void TESTER_TestOneSwitch(GPIO_TypeDef *SwPort, uint32_t SwPin, uint8_t flag);
+  
+/* Подключить фазу с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef */
+void TESTER_Connect_Phase(TESTER_PhaseSwitchTypeDef *PhaseSw);
+/* Отключить фазу с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef */
+void TESTER_Disconnect_Phase(TESTER_PhaseSwitchTypeDef *PhaseSw);
+/* Отключить фазу с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef */
+void TESTER_Disconnect_AllPhases(TESTER_PhaseSwitchTypeDef *SwPhaseA, TESTER_PhaseSwitchTypeDef *SwPhaseB);
+/* Переключить две фазы с помощью ключей (пинов) в TESTER_PhaseSwitchTypeDef */
+void TESTER_Reconnect_TwoPhases(TESTER_PhaseSwitchTypeDef *SwPhaseA, TESTER_PhaseSwitchTypeDef *SwPhaseB, TESTER_TicksDelayTypeDef *deadtime);
+/* Формирование задержки (в микро или миллисекундная) */
+void TESTER_Delay(TESTER_TicksDelayTypeDef *tickdelay, TIM_HandleTypeDef *htim);
+#endif //_TESTER_FUNC_H_
+

diode_tester/Core/Tester_main/tester_interface_func.c

@@ -0,0 +1,40 @@
+#include "tester_interface_func.h"
+
+
+/**
+  * @brief Инициализация структур интерфейса 
+  */
+void TESTER_InterfaceInit(GPIO_SwitchTypeDef *swstart, TESTER_LEDsTypeDef *leds)
+{
+}
+
+/**
+* @brief Включить индикацию таймаута старта при активации теста
+	*/
+void TESTER_LED_TimeoutForStartTest(GPIO_LEDTypeDef *led)
+{
+  GPIO_LED_Off(led);
+}
+
+/**
+  * @brief Включить индикацию прямого подключения диода
+	*/
+void TESTER_LED_TestingDiodeForward(GPIO_LEDTypeDef *led)
+{
+  GPIO_LED_Blink_Start(led, LED_FORWARD_DIODE_PERIOD);
+}
+/**
+  * @brief Включить индикацию обратного подключения диода
+	*/
+void TESTER_LED_TestingDiodeReverse(GPIO_LEDTypeDef *led)
+{
+  GPIO_LED_Blink_Start(led, LED_REVERSE_DIODE_PERIOD);
+}
+/**
+  * @brief Выключить индикацию ожидания комманды
+  * @details Сделано через моргание, чтобы понимать, что системные тики работают
+	*/
+void TESTER_LED_WaitForAction(GPIO_LEDTypeDef *led)
+{
+  GPIO_LED_Blink_Start(led, LED_BLINK_AS_ON);
+}

diode_tester/Core/Tester_main/tester_interface_func.h

@@ -0,0 +1,39 @@
+/**
+**************************************************************************
+* @file tester_func.h
+* @brief Заголовочный файл для функций МЗКТ.
+**************************************************************************
+@details
+
+*************************************************************************/
+
+	
+#ifndef _TESTER_INTERFACE_FUNC_H_
+#define _TESTER_INTERFACE_FUNC_H_
+
+#include "mylibs_include.h"
+#include "rs_message.h"
+
+
+
+typedef struct
+{
+  GPIO_LEDTypeDef LED1;
+}TESTER_LEDsTypeDef;
+
+
+/* Инициализация структур интерфейса */
+void TESTER_InterfaceInit(GPIO_SwitchTypeDef *swstart, TESTER_LEDsTypeDef *leds);
+
+
+/* Включить индикацию таймаута старта при активации теста */
+void TESTER_LED_TimeoutForStartTest(GPIO_LEDTypeDef *led);
+/* Включить индикацию прямого подключения диода */
+void TESTER_LED_TestingDiodeForward(GPIO_LEDTypeDef *led);
+/* Включить индикацию обратного подключения диода */
+void TESTER_LED_TestingDiodeReverse(GPIO_LEDTypeDef *led);
+/* Выключить индикацию активного теста диодов */
+void TESTER_LED_WaitForAction(GPIO_LEDTypeDef *led);
+
+#endif //_TESTER_INTERFACE_FUNC_H_
+

diode_tester/Core/Tester_main/tester_main.c

@@ -0,0 +1,240 @@
+#include "tester_main.h"
+
+
+TESTER_ProjectTypeDef TESTER = {0};
+
+
+/**s
+  * @brief    Инициализация всех модулей для работы тестера
+  */
+void TESTER_Init(TESTER_ProjectTypeDef *tester)
+{
+  TESTER_InterfaceInit(&tester->SwStart, &tester->leds);
+  GPIO_LED_Blink_Start(&tester->leds.LED1, 100);
+  
+  tester->delay = 250;
+  tester->delay_en = 0;
+  
+  tester->func.disable_reset_call = 0;
+  tester->htest = &hTestDiode;
+  TESTER_HandleInit(tester->htest, &tester->leds);
+  
+  tester->hmodbus = &hmodbus1;
+  tester->mbdata = &MB_DATA;
+  MODBUS_FirstInit();
+}
+
+
+/**s
+  * @brief    Функция подготовки тестера к while(1)
+  */
+void TESTER_pre_while(TESTER_ProjectTypeDef *tester)
+{
+  TESTER_Set_Default_Settings(tester);
+  TESTER_UpdateSettings(tester->htest, tester->mbdata);
+  
+  RS_Receive_IT(tester->hmodbus, &MODBUS_MSG);
+  HAL_TIM_Base_Start(&hmcstim);
+  
+  
+  tester->f.flag_init_done = 1;
+  GPIO_LED_Blink_Start(&tester->leds.LED1, LED_BLINK_AS_ON);
+}
+
+
+
+/**
+  * @brief    Главная функция работы тестера
+  */
+void TESTER_main_while(TESTER_ProjectTypeDef *tester)
+{
+  if(tester->delay_en)
+    msDelay(tester->delay);
+  
+  
+  /* ПОДТЯГИВАНИЕ СОСТОЯНИЯ КЛЮЧЕЙ С МОДБАС */
+  TESTER_TestOneSwitch(tester->htest->SwPhaseForward.SW_Port, tester->htest->SwPhaseForward.SwHI_Pin,
+                        tester->mbdata->Coils.KeyForwardHiTest);
+  TESTER_TestOneSwitch(tester->htest->SwPhaseForward.SW_Port, tester->htest->SwPhaseForward.SwLO_Pin,
+                        tester->mbdata->Coils.KeyForwardLoTest);
+  TESTER_TestOneSwitch(tester->htest->SwPhaseForward.SW_Port, tester->htest->SwPhaseReverse.SwHI_Pin,
+                        tester->mbdata->Coils.KeyReverseHiTest);
+  TESTER_TestOneSwitch(tester->htest->SwPhaseForward.SW_Port, tester->htest->SwPhaseReverse.SwLO_Pin,
+                        tester->mbdata->Coils.KeyReverseLoTest);
+  
+  
+  
+  /* ТЕСТ В ОБРАТНОМ ВКЛЮЧЕНИИ */
+  if(tester->func.test_diode_reverse)
+  {
+    tester->f.flag_test_active = 1;
+    TESTER_TestDiode_Reverse(tester->htest);
+    
+    /* Запись данных в modbus */
+    tester->mbdata->InRegs.ReversePeakVoltage = tester->htest->DiodeReversePeakVolt*1000;
+    
+    if(tester->func.disable_reset_call == 0)
+      tester->func.test_diode_reverse = 0;
+    
+    tester->f.flag_test_active = 0;
+    tester->mbdata->Coils.StartTest = 0;
+  }
+    
+  /* ТЕСТ В ПРЯМОМ ВКЛЮЧЕНИИ */
+  if(tester->func.test_diode_forward)
+  {
+    tester->f.flag_test_active = 1;
+    TESTER_TestDiode_Forward(tester->htest);
+    
+    /* Запись данных в modbus */
+    tester->mbdata->InRegs.ForwardVoltage = tester->htest->DiodeForwardVolt*1000;
+    
+    if(tester->func.disable_reset_call == 0)
+      tester->func.test_diode_forward = 0;
+    
+    tester->f.flag_test_active = 0;
+    tester->mbdata->Coils.StartTest = 0;
+  }
+  /* ТЕСТ ПЕРЕХОДА ИЗ ПРЯМОГО В ОБРАТНОЕ ВКЛЮЧЕНИЯ*/
+  if(tester->func.test_diode_switch_connection)
+  {
+    tester->f.flag_test_active = 1;
+    TESTER_TestDiode_SwitchConnection(tester->htest);
+    
+    /* Запись данных в modbus */
+    tester->mbdata->InRegs.ReversePeakVoltage = tester->htest->DiodeReversePeakVolt*1000;
+    tester->mbdata->InRegs.ForwardVoltage = tester->htest->DiodeForwardVolt*1000;
+    
+    if(tester->func.disable_reset_call == 0)
+      tester->func.test_diode_switch_connection = 0;
+    
+    tester->f.flag_test_active = 0;
+    tester->mbdata->Coils.StartTest = 0;
+  }
+}
+
+
+
+/**
+  * @brief    Функция работы интерфейса
+  */
+void TESTER_InterfaceHandle(TESTER_ProjectTypeDef *tester)
+{
+  if(tester->f.flag_init_done == 0)
+    return;
+  
+  
+  /* считывание режима тестера с модбас */
+  tester->mode = *((TESTER_TestModeTypeDef *)&tester->mbdata->Coils) & 0x3;
+  
+  /* если кнопка нажата или пришла соответствующая комманда модбас */
+  if(GPIO_Read_Swich(&tester->SwStart) || tester->mbdata->Coils.StartTest)
+  {
+    /* Обновление настроек тестера */
+    TESTER_UpdateSettings(tester->htest, tester->mbdata);
+    switch(tester->mode)
+    {
+      case TEST_FORWARD:
+        tester->func.test_diode_forward = 1;
+        break;
+          
+      case TEST_REVERSE:
+        tester->func.test_diode_reverse = 1;
+        break;
+          
+      case TEST_SWITCH_CONNECTION:
+        tester->func.test_diode_switch_connection = 1;
+        break;
+      
+      default:
+        break;
+    }
+  }
+  
+  
+  GPIO_LED_Blink_Handle(&tester->leds.LED1);
+  
+}
+
+
+/**
+  * @brief    Обновление настроек тестера
+  */
+void TESTER_UpdateSettings(TESTER_TestHandleTypeDef *htest, MB_DataStructureTypeDef *mbdata)
+{
+  htest->SwTimings.ticks_for_forward.ticks = mbdata->HoldRegs.TimeForForward;
+  htest->SwTimings.ticks_for_reverse.ticks = mbdata->HoldRegs.TimeForReverse;
+  htest->SwTimings.ticks_before_test.ticks = mbdata->HoldRegs.TimeBeforeTest;  
+  htest->SwTimings.ticks_deadtime.ticks = mbdata->HoldRegs.TimeDeadtime;
+  htest->SwTimings.ticks_before_expected_peak.ticks = mbdata->HoldRegs.TimeBeforePeak;
+  
+  htest->SwTimings.ticks_for_forward.msdelay = mbdata->Coils.msTimeForForward_enable;  
+  htest->SwTimings.ticks_for_reverse.msdelay = mbdata->Coils.msTimeForReverse_enable;
+  htest->SwTimings.ticks_before_test.msdelay = mbdata->Coils.msTimeBeforeTest_enable;  
+  htest->SwTimings.ticks_deadtime.msdelay = mbdata->Coils.msTimeDeadtime_enable;
+  htest->SwTimings.ticks_before_expected_peak.msdelay = mbdata->Coils.msTimeBeforePeak_enable;
+  
+  TESTER_ADC_UpdateSettings(htest->adc, mbdata);
+}
+
+
+/**
+  * @brief    Инициализация тестера по дефолтным настрйокам в tester_config.h
+  */
+void TESTER_Set_Default_Settings(TESTER_ProjectTypeDef *tester)
+{
+  tester->mbdata->Coils.ForwardTest = 1;
+  tester->mbdata->Coils.ReverseTest = 1;
+  
+  /* Настройка пинов для обратного включения */
+  tester->htest->SwPhaseForward.SW_Port   = SWITCH_PHASES_Port;
+  tester->htest->SwPhaseForward.SwHI_Pin  = SWITCH_PHASE_A_POS_Pin;
+  tester->htest->SwPhaseForward.SwLO_Pin  = SWITCH_PHASE_B_NEG_Pin;
+  
+  /* Настройка пинов для прямого включения */
+  tester->htest->SwPhaseReverse.SW_Port   = SWITCH_PHASES_Port;
+  tester->htest->SwPhaseReverse.SwHI_Pin  = SWITCH_PHASE_B_POS_Pin;
+  tester->htest->SwPhaseReverse.SwLO_Pin  = SWITCH_PHASE_A_NEG_Pin;
+  
+  
+  /* Настройка пинов для кнопки старта */
+  tester->SwStart.Sw_Port           = SWITCH_START_Port;
+  tester->SwStart.Sw_Pin            = SWITCH_START_Pin;
+  tester->SwStart.Sw_FilterDelay    = SWITCH_ANTI_DREBEZG_DELAY;
+  
+  /* Настройка пинов для светодиода*/
+  tester->leds.LED1.LED_Port        = LED1_Port;
+  tester->leds.LED1.LED_Pin         = LED1_Pin;  
+  
+  /* Настройка таймингов по умолчанию для тестирования */
+  tester->mbdata->HoldRegs.TimeBeforeTest             = DEF_TIME_BEFORE_TEST;
+  tester->mbdata->Coils.msTimeBeforeTest_enable       = DEF_TIME_BEFORE_TEST_MS_DELAY;
+  
+  tester->mbdata->HoldRegs.TimeForReverse       = DEF_TIME_FOR_REVERSE;
+  tester->mbdata->Coils.msTimeForReverse_enable = DEF_TIME_FOR_REVERSE_MS_DELAY;
+  
+  tester->mbdata->HoldRegs.TimeForForward             = DEF_TIME_FOR_FORWARD;
+  tester->mbdata->Coils.msTimeForForward_enable       = DEF_TIME_FOR_FORWARD_MS_DELAY;
+  
+  tester->mbdata->HoldRegs.TimeDeadtime               = DEF_DEADTIME;
+  tester->mbdata->Coils.msTimeDeadtime_enable         = DEF_DEADTIME_MS_DELAY;
+  
+  tester->mbdata->HoldRegs.TimeBeforePeak             = DEF_TIME_BEFORE_PEAK;
+  tester->mbdata->Coils.msTimeBeforePeak_enable       = DEF_TIME_BEFORE_PEAK_MS_DELAY;
+  
+  
+  /* Настройка АЦП */
+  tester->mbdata->HoldRegs.Adc_PulseWidth             = TESTER_ADC_PULSE_EXPETCED_WIDTH;
+  tester->mbdata->HoldRegs.Adc_CalibrValue            = ADC_VALUE_CALIBR;
+  tester->mbdata->HoldRegs.Adc_ZeroValue              = ADC_VALUE_ZERO;
+  tester->mbdata->HoldRegs.Adc_U_Calibr               = ADC_U_CALIBR;
+}
+
+/**
+  * @brief    Задеркжка главного цикла
+  */
+void TESTER_main_delay(TESTER_ProjectTypeDef *tester)
+{
+  if(tester->delay_en)
+    msDelay(tester->delay);
+}

diode_tester/Core/Tester_main/tester_main.h

@@ -0,0 +1,90 @@
+/**
+**************************************************************************
+* @file tester_func.h
+* @brief Заголовочный файл для функций МЗКТ.
+**************************************************************************
+@details
+
+*************************************************************************/
+
+	
+#ifndef _TESTER_MAIN_H_
+#define _TESTER_MAIN_H_
+
+#include "tester_func.h"
+
+
+/**
+  * @brief Структура для вызова различных функций
+	*/
+typedef struct
+{
+  unsigned test_diode_reverse:1;
+  unsigned test_diode_switch_connection:1;
+  unsigned test_diode_forward:1;
+  
+  unsigned disable_reset_call:1;
+}function_calls;
+
+/**
+  * @brief Структура для вызова различных функций
+	*/
+typedef struct
+{
+  unsigned flag_init_done:1;
+  unsigned flag_test_active:1;
+}TESTER_FlagsTypeDef;
+
+typedef enum
+{
+  TEST_DISABLE    = 0,
+  TEST_FORWARD   = 1,
+  TEST_REVERSE   = 2,
+  TEST_SWITCH_CONNECTION     = 3
+}TESTER_TestModeTypeDef;
+
+
+/**
+  * @brief Структура проекта тестер
+	*/
+typedef struct
+{
+  function_calls              func;     ///< вызов разных функций
+  
+  TESTER_TestModeTypeDef      mode;     ///< режим тестера
+  
+  TESTER_TestHandleTypeDef    *htest;   ///< дескриптор тестера
+  
+  RS_HandleTypeDef            *hmodbus;
+  MB_DataStructureTypeDef     *mbdata;
+  
+  
+  GPIO_SwitchTypeDef          SwStart;  ///< структура кнопки старта
+  TESTER_LEDsTypeDef          leds;     ///< структура светодиодов
+  
+  
+  TESTER_FlagsTypeDef         f;
+  
+  uint32_t        delay;        ///< задержка главного цикла
+  uint32_t        delay_en:1;   ///< включить задержку в главном цикле
+}TESTER_ProjectTypeDef;
+extern TESTER_ProjectTypeDef TESTER;
+
+
+
+/* Инициализация всех модулей для работы тестера */
+void TESTER_Init(TESTER_ProjectTypeDef *tester);
+/* Функция подготовки тестера к while(1) */
+void TESTER_pre_while(TESTER_ProjectTypeDef *tester);
+/* Главная функция работы тестера */
+void TESTER_main_while(TESTER_ProjectTypeDef *tester);
+/*  Функция работы интерфейса */
+void TESTER_InterfaceHandle(TESTER_ProjectTypeDef *tester);
+/* Обновление настроек тестера */
+void TESTER_UpdateSettings(TESTER_TestHandleTypeDef *htest, MB_DataStructureTypeDef *mbdata);
+/* Инициализация тестера по дефолтным настрйокам в tester_config.h */
+void TESTER_Set_Default_Settings(TESTER_ProjectTypeDef *tester);
+/*Задеркжка главного цикла */
+void TESTER_main_delay(TESTER_ProjectTypeDef *tester);
+#endif //_TESTER_MAIN_H_
+

diode_tester/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h

@@ -0,0 +1,273 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32F1xx Device Peripheral Access Layer Header File. 
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *            - Configuration section that allows to select:
+  *              - The STM32F1xx device used in the target application
+  *              - To use or not the peripheral's drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral's registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017-2021 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx
+  * @{
+  */
+    
+#ifndef __STM32F1XX_H
+#define __STM32F1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32F1)
+#define STM32F1
+#endif /* STM32F1 */
+
+/* Uncomment the line below according to the target STM32L device used in your 
+   application 
+  */
+
+#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
+    !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
+    !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
+  /* #define STM32F100xB  */   /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
+  /* #define STM32F100xE */    /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
+  /* #define STM32F101x6  */   /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
+  /* #define STM32F101xB  */   /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
+  /* #define STM32F101xE */    /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ 
+  /* #define STM32F101xG  */   /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
+  /* #define STM32F102x6 */    /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
+  /* #define STM32F102xB  */   /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
+  /* #define STM32F103x6  */   /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
+  /* #define STM32F103xB  */   /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
+  /* #define STM32F103xE */    /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
+  /* #define STM32F103xG  */   /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
+  /* #define STM32F105xC */    /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
+  /* #define STM32F107xC  */   /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */  
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+  
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number
+  */
+#define __STM32F1_CMSIS_VERSION_MAIN   (0x04) /*!< [31:24] main version */
+#define __STM32F1_CMSIS_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
+#define __STM32F1_CMSIS_VERSION_SUB2   (0x05) /*!< [15:8]  sub2 version */
+#define __STM32F1_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F1_CMSIS_VERSION        ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
+                                       |(__STM32F1_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F100xB)
+  #include "stm32f100xb.h"
+#elif defined(STM32F100xE)
+  #include "stm32f100xe.h"
+#elif defined(STM32F101x6)
+  #include "stm32f101x6.h"
+#elif defined(STM32F101xB)
+  #include "stm32f101xb.h"
+#elif defined(STM32F101xE)
+  #include "stm32f101xe.h"
+#elif defined(STM32F101xG)
+  #include "stm32f101xg.h"
+#elif defined(STM32F102x6)
+  #include "stm32f102x6.h"
+#elif defined(STM32F102xB)
+  #include "stm32f102xb.h"
+#elif defined(STM32F103x6)
+  #include "stm32f103x6.h"
+#elif defined(STM32F103xB)
+  #include "stm32f103xb.h"
+#elif defined(STM32F103xE)
+  #include "stm32f103xe.h"
+#elif defined(STM32F103xG)
+  #include "stm32f103xg.h"
+#elif defined(STM32F105xC)
+  #include "stm32f105xc.h"
+#elif defined(STM32F107xC)
+  #include "stm32f107xc.h"
+#else
+ #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */  
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+/* Use of CMSIS compiler intrinsics for register exclusive access */
+/* Atomic 32-bit register access macro to set one or several bits */
+#define ATOMIC_SET_BIT(REG, BIT)                             \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT);       \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEAR_BIT(REG, BIT)                           \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)                          \
+  do {                                                                     \
+    uint32_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U);               \
+  } while(0)
+
+/* Atomic 16-bit register access macro to set one or several bits */
+#define ATOMIC_SETH_BIT(REG, BIT)                            \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT);       \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEARH_BIT(REG, BIT)                          \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)                         \
+  do {                                                                     \
+    uint16_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U);               \
+  } while(0)
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+

diode_tester/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h

@@ -0,0 +1,96 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017-2021 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t  AHBPrescTable[16U];  /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8U];   /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */

diode_tester/Drivers/CMSIS/Device/ST/STM32F1xx/LICENSE.txt

@@ -0,0 +1,6 @@
+This software component is provided to you as part of a software package and
+applicable license terms are in the Package_license file. If you received this
+software component outside of a package or without applicable license terms,
+the terms of the Apache-2.0 license shall apply.
+You may obtain a copy of the Apache-2.0 at:
+https://opensource.org/licenses/Apache-2.0

diode_tester/Drivers/CMSIS/Include/cmsis_armcc.h

@@ -0,0 +1,865 @@
+/**************************************************************************//**
+ * @file     cmsis_armcc.h
+ * @brief    CMSIS compiler ARMCC (Arm Compiler 5) header file
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+  #error "Please use Arm Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* CMSIS compiler control architecture macros */
+#if ((defined (__TARGET_ARCH_6_M  ) && (__TARGET_ARCH_6_M   == 1)) || \
+     (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M  == 1))   )
+  #define __ARM_ARCH_6M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M  == 1))
+  #define __ARM_ARCH_7M__           1
+#endif
+
+#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
+  #define __ARM_ARCH_7EM__          1
+#endif
+
+  /* __ARM_ARCH_8M_BASE__  not applicable */
+  /* __ARM_ARCH_8M_MAIN__  not applicable */
+
+
+/* CMSIS compiler specific defines */
+#ifndef   __ASM
+  #define __ASM                                  __asm
+#endif
+#ifndef   __INLINE
+  #define __INLINE                               __inline
+#endif
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE                        static __inline
+#endif
+#ifndef   __STATIC_FORCEINLINE                 
+  #define __STATIC_FORCEINLINE                   static __forceinline
+#endif           
+#ifndef   __NO_RETURN
+  #define __NO_RETURN                            __declspec(noreturn)
+#endif
+#ifndef   __USED
+  #define __USED                                 __attribute__((used))
+#endif
+#ifndef   __WEAK
+  #define __WEAK                                 __attribute__((weak))
+#endif
+#ifndef   __PACKED
+  #define __PACKED                               __attribute__((packed))
+#endif
+#ifndef   __PACKED_STRUCT
+  #define __PACKED_STRUCT                        __packed struct
+#endif
+#ifndef   __PACKED_UNION
+  #define __PACKED_UNION                         __packed union
+#endif
+#ifndef   __UNALIGNED_UINT32        /* deprecated */
+  #define __UNALIGNED_UINT32(x)                  (*((__packed uint32_t *)(x)))
+#endif
+#ifndef   __UNALIGNED_UINT16_WRITE
+  #define __UNALIGNED_UINT16_WRITE(addr, val)    ((*((__packed uint16_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT16_READ
+  #define __UNALIGNED_UINT16_READ(addr)          (*((const __packed uint16_t *)(addr)))
+#endif
+#ifndef   __UNALIGNED_UINT32_WRITE
+  #define __UNALIGNED_UINT32_WRITE(addr, val)    ((*((__packed uint32_t *)(addr))) = (val))
+#endif
+#ifndef   __UNALIGNED_UINT32_READ
+  #define __UNALIGNED_UINT32_READ(addr)          (*((const __packed uint32_t *)(addr)))
+#endif
+#ifndef   __ALIGNED
+  #define __ALIGNED(x)                           __attribute__((aligned(x)))
+#endif
+#ifndef   __RESTRICT
+  #define __RESTRICT                             __restrict
+#endif
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+/**
+  \brief   Enable IRQ Interrupts
+  \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __enable_irq();     */
+
+
+/**
+  \brief   Disable IRQ Interrupts
+  \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+/* intrinsic void __disable_irq();    */
+
+/**
+  \brief   Get Control Register
+  \details Returns the content of the Control Register.
+  \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/**
+  \brief   Set Control Register
+  \details Writes the given value to the Control Register.
+  \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/**
+  \brief   Get IPSR Register
+  \details Returns the content of the IPSR Register.
+  \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/**
+  \brief   Get APSR Register
+  \details Returns the content of the APSR Register.
+  \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/**
+  \brief   Get xPSR Register
+  \details Returns the content of the xPSR Register.
+  \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/**
+  \brief   Get Process Stack Pointer
+  \details Returns the current value of the Process Stack Pointer (PSP).
+  \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/**
+  \brief   Set Process Stack Pointer
+  \details Assigns the given value to the Process Stack Pointer (PSP).
+  \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+  \brief   Get Main Stack Pointer
+  \details Returns the current value of the Main Stack Pointer (MSP).
+  \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/**
+  \brief   Set Main Stack Pointer
+  \details Assigns the given value to the Main Stack Pointer (MSP).
+  \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+  \brief   Get Priority Mask
+  \details Returns the current state of the priority mask bit from the Priority Mask Register.
+  \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/**
+  \brief   Set Priority Mask
+  \details Assigns the given value to the Priority Mask Register.
+  \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+/**
+  \brief   Enable FIQ
+  \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/**
+  \brief   Disable FIQ
+  \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+           Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/**
+  \brief   Get Base Priority
+  \details Returns the current value of the Base Priority register.
+  \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/**
+  \brief   Set Base Priority
+  \details Assigns the given value to the Base Priority register.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Set Base Priority with condition
+  \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+           or the new value increases the BASEPRI priority level.
+  \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  register uint32_t __regBasePriMax      __ASM("basepri_max");
+  __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+  \brief   Get Fault Mask
+  \details Returns the current value of the Fault Mask register.
+  \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/**
+  \brief   Set Fault Mask
+  \details Assigns the given value to the Fault Mask register.
+  \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1U);
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+
+/**
+  \brief   Get FPSCR
+  \details Returns the current value of the Floating Point Status/Control register.
+  \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0U);
+#endif
+}
+
+
+/**
+  \brief   Set FPSCR
+  \details Assigns the given value to the Floating Point Status/Control register.
+  \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+     (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#else
+  (void)fpscr;
+#endif
+}
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/**
+  \brief   No Operation
+  \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/**
+  \brief   Wait For Interrupt
+  \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/**
+  \brief   Wait For Event
+  \details Wait For Event is a hint instruction that permits the processor to enter
+           a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/**
+  \brief   Send Event
+  \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/**
+  \brief   Instruction Synchronization Barrier
+  \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+           so that all instructions following the ISB are fetched from cache or memory,
+           after the instruction has been completed.
+ */
+#define __ISB() do {\
+                   __schedule_barrier();\
+                   __isb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Synchronization Barrier
+  \details Acts as a special kind of Data Memory Barrier.
+           It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+                   __schedule_barrier();\
+                   __dsb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+/**
+  \brief   Data Memory Barrier
+  \details Ensures the apparent order of the explicit memory operations before
+           and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+                   __schedule_barrier();\
+                   __dmb(0xF);\
+                   __schedule_barrier();\
+                } while (0U)
+
+                  
+/**
+  \brief   Reverse byte order (32 bit)
+  \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   Reverse byte order (16 bit)
+  \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   Rotate Right in unsigned value (32 bit)
+  \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+  \param [in]    op1  Value to rotate
+  \param [in]    op2  Number of Bits to rotate
+  \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/**
+  \brief   Breakpoint
+  \details Causes the processor to enter Debug state.
+           Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+  \param [in]    value  is ignored by the processor.
+                 If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+/**
+  \brief   Reverse bit order of value
+  \details Reverses the bit order of the given value.
+  \param [in]    value  Value to reverse
+  \return               Reversed value
+ */
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+  #define __RBIT                          __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+  uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
+
+  result = value;                      /* r will be reversed bits of v; first get LSB of v */
+  for (value >>= 1U; value != 0U; value >>= 1U)
+  {
+    result <<= 1U;
+    result |= value & 1U;
+    s--;
+  }
+  result <<= s;                        /* shift when v's highest bits are zero */
+  return result;
+}
+#endif
+
+
+/**
+  \brief   Count leading zeros
+  \details Counts the number of leading zeros of a data value.
+  \param [in]  value  Value to count the leading zeros
+  \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+
+#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+     (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+/**
+  \brief   LDR Exclusive (8 bit)
+  \details Executes a exclusive LDR instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXB(ptr)                                                        ((uint8_t ) __ldrex(ptr))
+#else
+  #define __LDREXB(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (16 bit)
+  \details Executes a exclusive LDR instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXH(ptr)                                                        ((uint16_t) __ldrex(ptr))
+#else
+  #define __LDREXH(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   LDR Exclusive (32 bit)
+  \details Executes a exclusive LDR instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __LDREXW(ptr)                                                        ((uint32_t ) __ldrex(ptr))
+#else
+  #define __LDREXW(ptr)          _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr))  _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (8 bit)
+  \details Executes a exclusive STR instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXB(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXB(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (16 bit)
+  \details Executes a exclusive STR instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXH(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXH(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   STR Exclusive (32 bit)
+  \details Executes a exclusive STR instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+  \return          0  Function succeeded
+  \return          1  Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+  #define __STREXW(value, ptr)                                                 __strex(value, ptr)
+#else
+  #define __STREXW(value, ptr)   _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr)        _Pragma("pop")
+#endif
+
+
+/**
+  \brief   Remove the exclusive lock
+  \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX                           __clrex
+
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/**
+  \brief   Rotate Right with Extend (32 bit)
+  \details Moves each bit of a bitstring right by one bit.
+           The carry input is shifted in at the left end of the bitstring.
+  \param [in]    value  Value to rotate
+  \return               Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+  rrx r0, r0
+  bx lr
+}
+#endif
+
+
+/**
+  \brief   LDRT Unprivileged (8 bit)
+  \details Executes a Unprivileged LDRT instruction for 8 bit value.
+  \param [in]    ptr  Pointer to data
+  \return             value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr)                      ((uint8_t )  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (16 bit)
+  \details Executes a Unprivileged LDRT instruction for 16 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr)                      ((uint16_t)  __ldrt(ptr))
+
+
+/**
+  \brief   LDRT Unprivileged (32 bit)
+  \details Executes a Unprivileged LDRT instruction for 32 bit values.
+  \param [in]    ptr  Pointer to data
+  \return        value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr)                       ((uint32_t ) __ldrt(ptr))
+
+
+/**
+  \brief   STRT Unprivileged (8 bit)
+  \details Executes a Unprivileged STRT instruction for 8 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRBT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (16 bit)
+  \details Executes a Unprivileged STRT instruction for 16 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRHT(value, ptr)               __strt(value, ptr)
+
+
+/**
+  \brief   STRT Unprivileged (32 bit)
+  \details Executes a Unprivileged STRT instruction for 32 bit values.
+  \param [in]  value  Value to store
+  \param [in]    ptr  Pointer to location
+ */
+#define __STRT(value, ptr)                __strt(value, ptr)
+
+#else  /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+/**
+  \brief   Signed Saturate
+  \details Saturates a signed value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (1..32)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+{
+  if ((sat >= 1U) && (sat <= 32U))
+  {
+    const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+    const int32_t min = -1 - max ;
+    if (val > max)
+    {
+      return max;
+    }
+    else if (val < min)
+    {
+      return min;
+    }
+  }
+  return val;
+}
+
+/**
+  \brief   Unsigned Saturate
+  \details Saturates an unsigned value.
+  \param [in]  value  Value to be saturated
+  \param [in]    sat  Bit position to saturate to (0..31)
+  \return             Saturated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+{
+  if (sat <= 31U)
+  {
+    const uint32_t max = ((1U << sat) - 1U);
+    if (val > (int32_t)max)
+    {
+      return max;
+    }
+    else if (val < 0)
+    {
+      return 0U;
+    }
+  }
+  return (uint32_t)val;
+}
+
+#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__  == 1)) || \
+           (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     )
+
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32U)     ) >> 32U))
+
+#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1))     ) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */

diode_tester/Drivers/CMSIS/Include/cmsis_compiler.h

@@ -0,0 +1,266 @@
+/**************************************************************************//**
+ * @file     cmsis_compiler.h
+ * @brief    CMSIS compiler generic header file
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __CMSIS_COMPILER_H
+#define __CMSIS_COMPILER_H
+
+#include <stdint.h>
+
+/*
+ * Arm Compiler 4/5
+ */
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+
+/*
+ * Arm Compiler 6 (armclang)
+ */
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armclang.h"
+
+
+/*
+ * GNU Compiler
+ */
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+
+/*
+ * IAR Compiler
+ */
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iccarm.h>
+
+
+/*
+ * TI Arm Compiler
+ */
+#elif defined ( __TI_ARM__ )
+  #include <cmsis_ccs.h>
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __attribute__((packed))
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __attribute__((packed))
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __attribute__((packed)) T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)                           __attribute__((aligned(x)))
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+/*
+ * TASKING Compiler
+ */
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+  #ifndef   __ASM
+    #define __ASM                                  __asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    #define __NO_RETURN                            __attribute__((noreturn))
+  #endif
+  #ifndef   __USED
+    #define __USED                                 __attribute__((used))
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __attribute__((weak))
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               __packed__
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        struct __packed__
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         union __packed__
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    struct __packed__ T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #define __ALIGNED(x)              __align(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+/*
+ * COSMIC Compiler
+ */
+#elif defined ( __CSMC__ )
+   #include <cmsis_csm.h>
+
+ #ifndef   __ASM
+    #define __ASM                                  _asm
+  #endif
+  #ifndef   __INLINE
+    #define __INLINE                               inline
+  #endif
+  #ifndef   __STATIC_INLINE
+    #define __STATIC_INLINE                        static inline
+  #endif
+  #ifndef   __STATIC_FORCEINLINE
+    #define __STATIC_FORCEINLINE                   __STATIC_INLINE
+  #endif
+  #ifndef   __NO_RETURN
+    // NO RETURN is automatically detected hence no warning here
+    #define __NO_RETURN
+  #endif
+  #ifndef   __USED
+    #warning No compiler specific solution for __USED. __USED is ignored.
+    #define __USED
+  #endif
+  #ifndef   __WEAK
+    #define __WEAK                                 __weak
+  #endif
+  #ifndef   __PACKED
+    #define __PACKED                               @packed
+  #endif
+  #ifndef   __PACKED_STRUCT
+    #define __PACKED_STRUCT                        @packed struct
+  #endif
+  #ifndef   __PACKED_UNION
+    #define __PACKED_UNION                         @packed union
+  #endif
+  #ifndef   __UNALIGNED_UINT32        /* deprecated */
+    @packed struct T_UINT32 { uint32_t v; };
+    #define __UNALIGNED_UINT32(x)                  (((struct T_UINT32 *)(x))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT16_WRITE
+    __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
+    #define __UNALIGNED_UINT16_WRITE(addr, val)    (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT16_READ
+    __PACKED_STRUCT T_UINT16_READ { uint16_t v; };
+    #define __UNALIGNED_UINT16_READ(addr)          (((const struct T_UINT16_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __UNALIGNED_UINT32_WRITE
+    __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
+    #define __UNALIGNED_UINT32_WRITE(addr, val)    (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
+  #endif
+  #ifndef   __UNALIGNED_UINT32_READ
+    __PACKED_STRUCT T_UINT32_READ { uint32_t v; };
+    #define __UNALIGNED_UINT32_READ(addr)          (((const struct T_UINT32_READ *)(const void *)(addr))->v)
+  #endif
+  #ifndef   __ALIGNED
+    #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+  #ifndef   __RESTRICT
+    #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
+    #define __RESTRICT
+  #endif
+
+
+#else
+  #error Unknown compiler.
+#endif
+
+
+#endif /* __CMSIS_COMPILER_H */
+

diode_tester/Drivers/CMSIS/Include/cmsis_iccarm.h

@@ -0,0 +1,935 @@
+/**************************************************************************//**
+ * @file     cmsis_iccarm.h
+ * @brief    CMSIS compiler ICCARM (IAR Compiler for Arm) header file
+ * @version  V5.0.7
+ * @date     19. June 2018
+ ******************************************************************************/
+
+//------------------------------------------------------------------------------
+//
+// Copyright (c) 2017-2018 IAR Systems
+//
+// Licensed under the Apache License, Version 2.0 (the "License")
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+//------------------------------------------------------------------------------
+
+
+#ifndef __CMSIS_ICCARM_H__
+#define __CMSIS_ICCARM_H__
+
+#ifndef __ICCARM__
+  #error This file should only be compiled by ICCARM
+#endif
+
+#pragma system_include
+
+#define __IAR_FT _Pragma("inline=forced") __intrinsic
+
+#if (__VER__ >= 8000000)
+  #define __ICCARM_V8 1
+#else
+  #define __ICCARM_V8 0
+#endif
+
+#ifndef __ALIGNED
+  #if __ICCARM_V8
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #elif (__VER__ >= 7080000)
+    /* Needs IAR language extensions */
+    #define __ALIGNED(x) __attribute__((aligned(x)))
+  #else
+    #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored.
+    #define __ALIGNED(x)
+  #endif
+#endif
+
+
+/* Define compiler macros for CPU architecture, used in CMSIS 5.
+ */
+#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__
+/* Macros already defined */
+#else
+  #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M'
+    #if __ARM_ARCH == 6
+      #define __ARM_ARCH_6M__ 1
+    #elif __ARM_ARCH == 7
+      #if __ARM_FEATURE_DSP
+        #define __ARM_ARCH_7EM__ 1
+      #else
+        #define __ARM_ARCH_7M__ 1
+      #endif
+    #endif /* __ARM_ARCH */
+  #endif /* __ARM_ARCH_PROFILE == 'M' */
+#endif
+
+/* Alternativ core deduction for older ICCARM's */
+#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \
+    !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__)
+  #if defined(__ARM6M__) && (__CORE__ == __ARM6M__)
+    #define __ARM_ARCH_6M__ 1
+  #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__)
+    #define __ARM_ARCH_7M__ 1
+  #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__)
+    #define __ARM_ARCH_7EM__  1
+  #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__)
+    #define __ARM_ARCH_8M_BASE__ 1
+  #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__)
+    #define __ARM_ARCH_8M_MAIN__ 1
+  #else
+    #error "Unknown target."
+  #endif
+#endif
+
+
+
+#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1
+  #define __IAR_M0_FAMILY  1
+#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1
+  #define __IAR_M0_FAMILY  1
+#else
+  #define __IAR_M0_FAMILY  0
+#endif
+
+
+#ifndef __ASM
+  #define __ASM __asm
+#endif
+
+#ifndef __INLINE
+  #define __INLINE inline
+#endif
+
+#ifndef   __NO_RETURN
+  #if __ICCARM_V8
+    #define __NO_RETURN __attribute__((__noreturn__))
+  #else
+    #define __NO_RETURN _Pragma("object_attribute=__noreturn")
+  #endif
+#endif
+
+#ifndef   __PACKED
+  #if __ICCARM_V8
+    #define __PACKED __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED __packed
+  #endif
+#endif
+
+#ifndef   __PACKED_STRUCT
+  #if __ICCARM_V8
+    #define __PACKED_STRUCT struct __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_STRUCT __packed struct
+  #endif
+#endif
+
+#ifndef   __PACKED_UNION
+  #if __ICCARM_V8
+    #define __PACKED_UNION union __attribute__((packed, aligned(1)))
+  #else
+    /* Needs IAR language extensions */
+    #define __PACKED_UNION __packed union
+  #endif
+#endif
+
+#ifndef   __RESTRICT
+  #define __RESTRICT            __restrict
+#endif
+
+#ifndef   __STATIC_INLINE
+  #define __STATIC_INLINE       static inline
+#endif
+
+#ifndef   __FORCEINLINE
+  #define __FORCEINLINE         _Pragma("inline=forced")
+#endif
+
+#ifndef   __STATIC_FORCEINLINE
+  #define __STATIC_FORCEINLINE  __FORCEINLINE __STATIC_INLINE
+#endif
+
+#ifndef __UNALIGNED_UINT16_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint16_t __iar_uint16_read(void const *ptr)
+{
+  return *(__packed uint16_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR)
+#endif
+
+
+#ifndef __UNALIGNED_UINT16_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val)
+{
+  *(__packed uint16_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32_READ
+#pragma language=save
+#pragma language=extended
+__IAR_FT uint32_t __iar_uint32_read(void const *ptr)
+{
+  return *(__packed uint32_t*)(ptr);
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR)
+#endif
+
+#ifndef __UNALIGNED_UINT32_WRITE
+#pragma language=save
+#pragma language=extended
+__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val)
+{
+  *(__packed uint32_t*)(ptr) = val;;
+}
+#pragma language=restore
+#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL)
+#endif
+
+#ifndef __UNALIGNED_UINT32   /* deprecated */
+#pragma language=save
+#pragma language=extended
+__packed struct  __iar_u32 { uint32_t v; };
+#pragma language=restore
+#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v)
+#endif
+
+#ifndef   __USED
+  #if __ICCARM_V8
+    #define __USED __attribute__((used))
+  #else
+    #define __USED _Pragma("__root")
+  #endif
+#endif
+
+#ifndef   __WEAK
+  #if __ICCARM_V8
+    #define __WEAK __attribute__((weak))
+  #else
+    #define __WEAK _Pragma("__weak")
+  #endif
+#endif
+
+
+#ifndef __ICCARM_INTRINSICS_VERSION__
+  #define __ICCARM_INTRINSICS_VERSION__  0
+#endif
+
+#if __ICCARM_INTRINSICS_VERSION__ == 2
+
+  #if defined(__CLZ)
+    #undef __CLZ
+  #endif
+  #if defined(__REVSH)
+    #undef __REVSH
+  #endif
+  #if defined(__RBIT)
+    #undef __RBIT
+  #endif
+  #if defined(__SSAT)
+    #undef __SSAT
+  #endif
+  #if defined(__USAT)
+    #undef __USAT
+  #endif
+
+  #include "iccarm_builtin.h"
+
+  #define __disable_fault_irq __iar_builtin_disable_fiq
+  #define __disable_irq       __iar_builtin_disable_interrupt
+  #define __enable_fault_irq  __iar_builtin_enable_fiq
+  #define __enable_irq        __iar_builtin_enable_interrupt
+  #define __arm_rsr           __iar_builtin_rsr
+  #define __arm_wsr           __iar_builtin_wsr
+
+
+  #define __get_APSR()                (__arm_rsr("APSR"))
+  #define __get_BASEPRI()             (__arm_rsr("BASEPRI"))
+  #define __get_CONTROL()             (__arm_rsr("CONTROL"))
+  #define __get_FAULTMASK()           (__arm_rsr("FAULTMASK"))
+
+  #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+       (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     )
+    #define __get_FPSCR()             (__arm_rsr("FPSCR"))
+    #define __set_FPSCR(VALUE)        (__arm_wsr("FPSCR", (VALUE)))
+  #else
+    #define __get_FPSCR()             ( 0 )
+    #define __set_FPSCR(VALUE)        ((void)VALUE)
+  #endif
+
+  #define __get_IPSR()                (__arm_rsr("IPSR"))
+  #define __get_MSP()                 (__arm_rsr("MSP"))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __get_MSPLIM()            (0U)
+  #else
+    #define __get_MSPLIM()            (__arm_rsr("MSPLIM"))
+  #endif
+  #define __get_PRIMASK()             (__arm_rsr("PRIMASK"))
+  #define __get_PSP()                 (__arm_rsr("PSP"))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __get_PSPLIM()            (0U)
+  #else
+    #define __get_PSPLIM()            (__arm_rsr("PSPLIM"))
+  #endif
+
+  #define __get_xPSR()                (__arm_rsr("xPSR"))
+
+  #define __set_BASEPRI(VALUE)        (__arm_wsr("BASEPRI", (VALUE)))
+  #define __set_BASEPRI_MAX(VALUE)    (__arm_wsr("BASEPRI_MAX", (VALUE)))
+  #define __set_CONTROL(VALUE)        (__arm_wsr("CONTROL", (VALUE)))
+  #define __set_FAULTMASK(VALUE)      (__arm_wsr("FAULTMASK", (VALUE)))
+  #define __set_MSP(VALUE)            (__arm_wsr("MSP", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure MSPLIM is RAZ/WI
+    #define __set_MSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_MSPLIM(VALUE)       (__arm_wsr("MSPLIM", (VALUE)))
+  #endif
+  #define __set_PRIMASK(VALUE)        (__arm_wsr("PRIMASK", (VALUE)))
+  #define __set_PSP(VALUE)            (__arm_wsr("PSP", (VALUE)))
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __set_PSPLIM(VALUE)       ((void)(VALUE))
+  #else
+    #define __set_PSPLIM(VALUE)       (__arm_wsr("PSPLIM", (VALUE)))
+  #endif
+
+  #define __TZ_get_CONTROL_NS()       (__arm_rsr("CONTROL_NS"))
+  #define __TZ_set_CONTROL_NS(VALUE)  (__arm_wsr("CONTROL_NS", (VALUE)))
+  #define __TZ_get_PSP_NS()           (__arm_rsr("PSP_NS"))
+  #define __TZ_set_PSP_NS(VALUE)      (__arm_wsr("PSP_NS", (VALUE)))
+  #define __TZ_get_MSP_NS()           (__arm_rsr("MSP_NS"))
+  #define __TZ_set_MSP_NS(VALUE)      (__arm_wsr("MSP_NS", (VALUE)))
+  #define __TZ_get_SP_NS()            (__arm_rsr("SP_NS"))
+  #define __TZ_set_SP_NS(VALUE)       (__arm_wsr("SP_NS", (VALUE)))
+  #define __TZ_get_PRIMASK_NS()       (__arm_rsr("PRIMASK_NS"))
+  #define __TZ_set_PRIMASK_NS(VALUE)  (__arm_wsr("PRIMASK_NS", (VALUE)))
+  #define __TZ_get_BASEPRI_NS()       (__arm_rsr("BASEPRI_NS"))
+  #define __TZ_set_BASEPRI_NS(VALUE)  (__arm_wsr("BASEPRI_NS", (VALUE)))
+  #define __TZ_get_FAULTMASK_NS()     (__arm_rsr("FAULTMASK_NS"))
+  #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE)))
+
+  #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+       (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
+    // without main extensions, the non-secure PSPLIM is RAZ/WI
+    #define __TZ_get_PSPLIM_NS()      (0U)
+    #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE))
+  #else
+    #define __TZ_get_PSPLIM_NS()      (__arm_rsr("PSPLIM_NS"))
+    #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE)))
+  #endif
+
+  #define __TZ_get_MSPLIM_NS()        (__arm_rsr("MSPLIM_NS"))
+  #define __TZ_set_MSPLIM_NS(VALUE)   (__arm_wsr("MSPLIM_NS", (VALUE)))
+
+  #define __NOP     __iar_builtin_no_operation
+
+  #define __CLZ     __iar_builtin_CLZ
+  #define __CLREX   __iar_builtin_CLREX
+
+  #define __DMB     __iar_builtin_DMB
+  #define __DSB     __iar_builtin_DSB
+  #define __ISB     __iar_builtin_ISB
+
+  #define __LDREXB  __iar_builtin_LDREXB
+  #define __LDREXH  __iar_builtin_LDREXH
+  #define __LDREXW  __iar_builtin_LDREX
+
+  #define __RBIT    __iar_builtin_RBIT
+  #define __REV     __iar_builtin_REV
+  #define __REV16   __iar_builtin_REV16
+
+  __IAR_FT int16_t __REVSH(int16_t val)
+  {
+    return (int16_t) __iar_builtin_REVSH(val);
+  }
+
+  #define __ROR     __iar_builtin_ROR
+  #define __RRX     __iar_builtin_RRX
+
+  #define __SEV     __iar_builtin_SEV
+
+  #if !__IAR_M0_FAMILY
+    #define __SSAT    __iar_builtin_SSAT
+  #endif
+
+  #define __STREXB  __iar_builtin_STREXB
+  #define __STREXH  __iar_builtin_STREXH
+  #define __STREXW  __iar_builtin_STREX
+
+  #if !__IAR_M0_FAMILY
+    #define __USAT    __iar_builtin_USAT
+  #endif
+
+  #define __WFE     __iar_builtin_WFE
+  #define __WFI     __iar_builtin_WFI
+
+  #if __ARM_MEDIA__
+    #define __SADD8   __iar_builtin_SADD8
+    #define __QADD8   __iar_builtin_QADD8
+    #define __SHADD8  __iar_builtin_SHADD8
+    #define __UADD8   __iar_builtin_UADD8
+    #define __UQADD8  __iar_builtin_UQADD8
+    #define __UHADD8  __iar_builtin_UHADD8
+    #define __SSUB8   __iar_builtin_SSUB8
+    #define __QSUB8   __iar_builtin_QSUB8
+    #define __SHSUB8  __iar_builtin_SHSUB8
+    #define __USUB8   __iar_builtin_USUB8
+    #define __UQSUB8  __iar_builtin_UQSUB8
+    #define __UHSUB8  __iar_builtin_UHSUB8
+    #define __SADD16  __iar_builtin_SADD16
+    #define __QADD16  __iar_builtin_QADD16
+    #define __SHADD16 __iar_builtin_SHADD16
+    #define __UADD16  __iar_builtin_UADD16
+    #define __UQADD16 __iar_builtin_UQADD16
+    #define __UHADD16 __iar_builtin_UHADD16
+    #define __SSUB16  __iar_builtin_SSUB16
+    #define __QSUB16  __iar_builtin_QSUB16
+    #define __SHSUB16 __iar_builtin_SHSUB16
+    #define __USUB16  __iar_builtin_USUB16
+    #define __UQSUB16 __iar_builtin_UQSUB16
+    #define __UHSUB16 __iar_builtin_UHSUB16
+    #define __SASX    __iar_builtin_SASX
+    #define __QASX    __iar_builtin_QASX
+    #define __SHASX   __iar_builtin_SHASX
+    #define __UASX    __iar_builtin_UASX
+    #define __UQASX   __iar_builtin_UQASX
+    #define __UHASX   __iar_builtin_UHASX
+    #define __SSAX    __iar_builtin_SSAX
+    #define __QSAX    __iar_builtin_QSAX
+    #define __SHSAX   __iar_builtin_SHSAX
+    #define __USAX    __iar_builtin_USAX
+    #define __UQSAX   __iar_builtin_UQSAX
+    #define __UHSAX   __iar_builtin_UHSAX
+    #define __USAD8   __iar_builtin_USAD8
+    #define __USADA8  __iar_builtin_USADA8
+    #define __SSAT16  __iar_builtin_SSAT16
+    #define __USAT16  __iar_builtin_USAT16
+    #define __UXTB16  __iar_builtin_UXTB16
+    #define __UXTAB16 __iar_builtin_UXTAB16
+    #define __SXTB16  __iar_builtin_SXTB16
+    #define __SXTAB16 __iar_builtin_SXTAB16
+    #define __SMUAD   __iar_builtin_SMUAD
+    #define __SMUADX  __iar_builtin_SMUADX
+    #define __SMMLA   __iar_builtin_SMMLA
+    #define __SMLAD   __iar_builtin_SMLAD
+    #define __SMLADX  __iar_builtin_SMLADX
+    #define __SMLALD  __iar_builtin_SMLALD
+    #define __SMLALDX __iar_builtin_SMLALDX
+    #define __SMUSD   __iar_builtin_SMUSD
+    #define __SMUSDX  __iar_builtin_SMUSDX
+    #define __SMLSD   __iar_builtin_SMLSD
+    #define __SMLSDX  __iar_builtin_SMLSDX
+    #define __SMLSLD  __iar_builtin_SMLSLD
+    #define __SMLSLDX __iar_builtin_SMLSLDX
+    #define __SEL     __iar_builtin_SEL
+    #define __QADD    __iar_builtin_QADD
+    #define __QSUB    __iar_builtin_QSUB
+    #define __PKHBT   __iar_builtin_PKHBT
+    #define __PKHTB   __iar_builtin_PKHTB
+  #endif
+
+#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #define __CLZ  __cmsis_iar_clz_not_active
+    #define __SSAT __cmsis_iar_ssat_not_active
+    #define __USAT __cmsis_iar_usat_not_active
+    #define __RBIT __cmsis_iar_rbit_not_active
+    #define __get_APSR  __cmsis_iar_get_APSR_not_active
+  #endif
+
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #define __get_FPSCR __cmsis_iar_get_FPSR_not_active
+    #define __set_FPSCR __cmsis_iar_set_FPSR_not_active
+  #endif
+
+  #ifdef __INTRINSICS_INCLUDED
+  #error intrinsics.h is already included previously!
+  #endif
+
+  #include <intrinsics.h>
+
+  #if __IAR_M0_FAMILY
+   /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
+    #undef __CLZ
+    #undef __SSAT
+    #undef __USAT
+    #undef __RBIT
+    #undef __get_APSR
+
+    __STATIC_INLINE uint8_t __CLZ(uint32_t data)
+    {
+      if (data == 0U) { return 32U; }
+
+      uint32_t count = 0U;
+      uint32_t mask = 0x80000000U;
+
+      while ((data & mask) == 0U)
+      {
+        count += 1U;
+        mask = mask >> 1U;
+      }
+      return count;
+    }
+
+    __STATIC_INLINE uint32_t __RBIT(uint32_t v)
+    {
+      uint8_t sc = 31U;
+      uint32_t r = v;
+      for (v >>= 1U; v; v >>= 1U)
+      {
+        r <<= 1U;
+        r |= v & 1U;
+        sc--;
+      }
+      return (r << sc);
+    }
+
+    __STATIC_INLINE  uint32_t __get_APSR(void)
+    {
+      uint32_t res;
+      __asm("MRS      %0,APSR" : "=r" (res));
+      return res;
+    }
+
+  #endif
+
+  #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
+         (defined (__FPU_USED   ) && (__FPU_USED    == 1U))     ))
+    #undef __get_FPSCR
+    #undef __set_FPSCR
+    #define __get_FPSCR()       (0)
+    #define __set_FPSCR(VALUE)  ((void)VALUE)
+  #endif
+
+  #pragma diag_suppress=Pe940
+  #pragma diag_suppress=Pe177
+
+  #define __enable_irq    __enable_interrupt
+  #define __disable_irq   __disable_interrupt
+  #define __NOP           __no_operation
+
+  #define __get_xPSR      __get_PSR
+
+  #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0)
+
+    __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr)
+    {
+      return __LDREX((unsigned long *)ptr);
+    }
+
+    __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr)
+    {
+      return __STREX(value, (unsigned long *)ptr);
+    }
+  #endif
+
+
+  /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+  #if (__CORTEX_M >= 0x03)
+
+    __IAR_FT uint32_t __RRX(uint32_t value)
+    {
+      uint32_t result;
+      __ASM("RRX      %0, %1" : "=r"(result) : "r" (value) : "cc");
+      return(result);
+    }
+
+    __IAR_FT void __set_BASEPRI_MAX(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_MAX,%0"::"r" (value));
+    }
+
+
+    #define __enable_fault_irq  __enable_fiq
+    #define __disable_fault_irq __disable_fiq
+
+
+  #endif /* (__CORTEX_M >= 0x03) */
+
+  __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2)
+  {
+    return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2));
+  }
+
+  #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+       (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+   __IAR_FT uint32_t __get_MSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,MSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_MSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure MSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      MSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __get_PSPLIM(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __set_PSPLIM(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t __TZ_get_CONTROL_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,CONTROL_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_CONTROL_NS(uint32_t value)
+    {
+      __asm volatile("MSR      CONTROL_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSP_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_SP_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,SP_NS" : "=r" (res));
+      return res;
+    }
+    __IAR_FT void   __TZ_set_SP_NS(uint32_t value)
+    {
+      __asm volatile("MSR      SP_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PRIMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,PRIMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PRIMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      PRIMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_BASEPRI_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,BASEPRI_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_BASEPRI_NS(uint32_t value)
+    {
+      __asm volatile("MSR      BASEPRI_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_FAULTMASK_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,FAULTMASK_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_FAULTMASK_NS(uint32_t value)
+    {
+      __asm volatile("MSR      FAULTMASK_NS,%0" :: "r" (value));
+    }
+
+    __IAR_FT uint32_t   __TZ_get_PSPLIM_NS(void)
+    {
+      uint32_t res;
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      res = 0U;
+    #else
+      __asm volatile("MRS      %0,PSPLIM_NS" : "=r" (res));
+    #endif
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_PSPLIM_NS(uint32_t value)
+    {
+    #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
+         (!defined (__ARM_FEATURE_CMSE  ) || (__ARM_FEATURE_CMSE   < 3)))
+      // without main extensions, the non-secure PSPLIM is RAZ/WI
+      (void)value;
+    #else
+      __asm volatile("MSR      PSPLIM_NS,%0" :: "r" (value));
+    #endif
+    }
+
+    __IAR_FT uint32_t   __TZ_get_MSPLIM_NS(void)
+    {
+      uint32_t res;
+      __asm volatile("MRS      %0,MSPLIM_NS" : "=r" (res));
+      return res;
+    }
+
+    __IAR_FT void   __TZ_set_MSPLIM_NS(uint32_t value)
+    {
+      __asm volatile("MSR      MSPLIM_NS,%0" :: "r" (value));
+    }
+
+  #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#endif   /* __ICCARM_INTRINSICS_VERSION__ == 2 */
+
+#define __BKPT(value)    __asm volatile ("BKPT     %0" : : "i"(value))
+
+#if __IAR_M0_FAMILY
+  __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
+  {
+    if ((sat >= 1U) && (sat <= 32U))
+    {
+      const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
+      const int32_t min = -1 - max ;
+      if (val > max)
+      {
+        return max;
+      }
+      else if (val < min)
+      {
+        return min;
+      }
+    }
+    return val;
+  }
+
+  __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
+  {
+    if (sat <= 31U)
+    {
+      const uint32_t max = ((1U << sat) - 1U);
+      if (val > (int32_t)max)
+      {
+        return max;
+      }
+      else if (val < 0)
+      {
+        return 0U;
+      }
+    }
+    return (uint32_t)val;
+  }
+#endif
+
+#if (__CORTEX_M >= 0x03)   /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
+
+  __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDRT(volatile uint32_t *addr)
+  {
+    uint32_t res;
+    __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr)
+  {
+    __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr)
+  {
+    __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
+  }
+
+  __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr)
+  {
+    __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory");
+  }
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
+     (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1))    )
+
+
+  __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDA(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr)
+  {
+    __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr)
+  {
+    __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr)
+  {
+    __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
+  }
+
+  __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint8_t)res);
+  }
+
+  __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return ((uint16_t)res);
+  }
+
+  __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+  __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
+  {
+    uint32_t res;
+    __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
+    return res;
+  }
+
+#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
+
+#undef __IAR_FT
+#undef __IAR_M0_FAMILY
+#undef __ICCARM_V8
+
+#pragma diag_default=Pe940
+#pragma diag_default=Pe177
+
+#endif /* __CMSIS_ICCARM_H__ */

diode_tester/Drivers/CMSIS/Include/cmsis_version.h

@@ -0,0 +1,39 @@
+/**************************************************************************//**
+ * @file     cmsis_version.h
+ * @brief    CMSIS Core(M) Version definitions
+ * @version  V5.0.2
+ * @date     19. April 2017
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2017 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CMSIS_VERSION_H
+#define __CMSIS_VERSION_H
+
+/*  CMSIS Version definitions */
+#define __CM_CMSIS_VERSION_MAIN  ( 5U)                                      /*!< [31:16] CMSIS Core(M) main version */
+#define __CM_CMSIS_VERSION_SUB   ( 1U)                                      /*!< [15:0]  CMSIS Core(M) sub version */
+#define __CM_CMSIS_VERSION       ((__CM_CMSIS_VERSION_MAIN << 16U) | \
+                                   __CM_CMSIS_VERSION_SUB           )       /*!< CMSIS Core(M) version number */
+#endif

diode_tester/Drivers/CMSIS/Include/core_cm0.h

@@ -0,0 +1,949 @@
+/**************************************************************************//**
+ * @file     core_cm0.h
+ * @brief    CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version  V5.0.5
+ * @date     28. May 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M0
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM0_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (0U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0_REV
+    #define __CM0_REV               0x0000U
+    #warning "__CM0_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M0 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

diode_tester/Drivers/CMSIS/Include/core_cm1.h

@@ -0,0 +1,976 @@
+/**************************************************************************//**
+ * @file     core_cm1.h
+ * @brief    CMSIS Cortex-M1 Core Peripheral Access Layer Header File
+ * @version  V1.0.0
+ * @date     23. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM1_H_GENERIC
+#define __CORE_CM1_H_GENERIC
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/**
+  \ingroup Cortex_M1
+  @{
+ */
+
+#include "cmsis_version.h"
+ 
+/*  CMSIS CM1 definitions */
+#define __CM1_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */
+#define __CM1_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */
+#define __CM1_CMSIS_VERSION       ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
+                                    __CM1_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
+
+#define __CORTEX_M                (1U)                                   /*!< Cortex-M Core */
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0U
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #if defined __ARM_PCS_VFP
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TI_ARM__ )
+  #if defined __TI_VFP_SUPPORT__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )
+  #if ( __CSMC__ & 0x400U)
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#endif
+
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM1_H_DEPENDANT
+#define __CORE_CM1_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM1_REV
+    #define __CM1_REV               0x0100U
+    #warning "__CM1_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2U
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0U
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */
+#define     __OM     volatile            /*! Defines 'write only' structure member permissions */
+#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M1 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_core_register Defines and Type Definitions
+  \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_CORE  Status and Control Registers
+  \brief      Core Register type definitions.
+  @{
+ */
+
+/**
+  \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/**
+  \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/**
+  \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */
+  } b;                                   /*!< Structure used for bit  access */
+  uint32_t w;                            /*!< Type      used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+  \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */
+        uint32_t RESERVED0[31U];
+  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */
+        uint32_t RSERVED1[31U];
+  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */
+        uint32_t RESERVED2[31U];
+  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */
+        uint32_t RESERVED3[31U];
+        uint32_t RESERVED4[64U];
+  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCB     System Control Block (SCB)
+  \brief    Type definitions for the System Control Block Registers
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */
+  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */
+        uint32_t RESERVED0;
+  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */
+  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */
+  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */
+        uint32_t RESERVED1;
+  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */
+  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+  \brief    Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+        uint32_t RESERVED0[2U];
+  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_ITCMUAEN_Pos            4U                                        /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMUAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos)         /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
+
+#define SCnSCB_ACTLR_ITCMLAEN_Pos            3U                                        /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
+#define SCnSCB_ACTLR_ITCMLAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos)         /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+  \brief    Type definitions for the System Timer Registers.
+  @{
+ */
+
+/**
+  \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */
+  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */
+  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+  \ingroup  CMSIS_core_register
+  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+  \brief    Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+            Therefore they are not covered by the Cortex-M1 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_bitfield     Core register bit field macros
+  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+  @{
+ */
+
+/**
+  \brief   Mask and shift a bit field value for use in a register bit range.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted value.
+*/
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
+
+/**
+  \brief     Mask and shift a register value to extract a bit filed value.
+  \param[in] field  Name of the register bit field.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
+  \return           Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+  \ingroup    CMSIS_core_register
+  \defgroup   CMSIS_core_base     Core Definitions
+  \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Core Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/**
+  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+  \brief    Functions that manage interrupts and exceptions via the NVIC.
+  @{
+ */
+
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping
+  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M1 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+
+#define NVIC_USER_IRQ_OFFSET          16
+
+
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
+
+
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+#define __NVIC_SetPriorityGrouping(X) (void)(X)
+#define __NVIC_GetPriorityGrouping()  (0U)
+
+/**
+  \brief   Enable Interrupt
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Enable status
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
+
+
+/**
+  \brief   Get Pending Interrupt
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt status is not pending.
+  \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+
+
+/**
+  \brief   Set Pending Interrupt
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Clear Pending Interrupt
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
+
+
+/**
+  \brief   Set Interrupt Priority
+  \details Sets the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]      IRQn  Interrupt number.
+  \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
+ */
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else
+  {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/**
+  \brief   Get Interrupt Priority
+  \details Reads the priority of a device specific interrupt or a processor exception.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn  Interrupt number.
+  \return             Interrupt Priority.
+                      Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+  else
+  {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/**
+  \brief   Encode Priority
+  \details Encodes the priority for an interrupt with the given priority group,
+           preemptive priority value, and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+  \param [in]     PriorityGroup  Used priority group.
+  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+  \param [in]       SubPriority  Subpriority value (starting from 0).
+  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/**
+  \brief   Decode Priority
+  \details Decodes an interrupt priority value with a given priority group to
+           preemptive priority value and subpriority value.
+           In case of a conflict between priority grouping and available
+           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+  \param [in]     PriorityGroup  Used priority group.
+  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+  \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+
+/**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           Address 0 must be mapped to SRAM.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)0x0U;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+
+
+/**
+  \brief   System Reset
+  \details Initiates a system reset request to reset the MCU.
+ */
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                          /* Ensure completion of memory access */
+
+  for(;;)                                                           /* wait until reset */
+  {
+    __NOP();
+  }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+  \brief    Functions that configure the System.
+  @{
+ */
+
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
+
+/**
+  \brief   System Tick Configuration
+  \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+           Counter is in free running mode to generate periodic interrupts.
+  \param [in]  ticks  Number of ticks between two interrupts.
+  \return          0  Function succeeded.
+  \return          1  Function failed.
+  \note    When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+           function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+           must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+  {
+    return (1UL);                                                   /* Reload value impossible */
+  }
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM1_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

diode_tester/Drivers/CMSIS/Include/mpu_armv7.h

@@ -0,0 +1,270 @@
+/******************************************************************************
+ * @file     mpu_armv7.h
+ * @brief    CMSIS MPU API for Armv7-M MPU
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+ 
+#ifndef ARM_MPU_ARMV7_H
+#define ARM_MPU_ARMV7_H
+
+#define ARM_MPU_REGION_SIZE_32B      ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
+#define ARM_MPU_REGION_SIZE_64B      ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
+#define ARM_MPU_REGION_SIZE_128B     ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
+#define ARM_MPU_REGION_SIZE_256B     ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
+#define ARM_MPU_REGION_SIZE_512B     ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
+#define ARM_MPU_REGION_SIZE_1KB      ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
+#define ARM_MPU_REGION_SIZE_2KB      ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
+#define ARM_MPU_REGION_SIZE_4KB      ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
+#define ARM_MPU_REGION_SIZE_8KB      ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
+#define ARM_MPU_REGION_SIZE_16KB     ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
+#define ARM_MPU_REGION_SIZE_32KB     ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
+#define ARM_MPU_REGION_SIZE_64KB     ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
+#define ARM_MPU_REGION_SIZE_128KB    ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
+#define ARM_MPU_REGION_SIZE_256KB    ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
+#define ARM_MPU_REGION_SIZE_512KB    ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
+#define ARM_MPU_REGION_SIZE_1MB      ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
+#define ARM_MPU_REGION_SIZE_2MB      ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
+#define ARM_MPU_REGION_SIZE_4MB      ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
+#define ARM_MPU_REGION_SIZE_8MB      ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
+#define ARM_MPU_REGION_SIZE_16MB     ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
+#define ARM_MPU_REGION_SIZE_32MB     ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
+#define ARM_MPU_REGION_SIZE_64MB     ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
+#define ARM_MPU_REGION_SIZE_128MB    ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
+#define ARM_MPU_REGION_SIZE_256MB    ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
+#define ARM_MPU_REGION_SIZE_512MB    ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
+#define ARM_MPU_REGION_SIZE_1GB      ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
+#define ARM_MPU_REGION_SIZE_2GB      ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
+#define ARM_MPU_REGION_SIZE_4GB      ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
+
+#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
+#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
+#define ARM_MPU_AP_URO  2U ///!< MPU Access Permission unprivileged access read-only
+#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
+#define ARM_MPU_AP_PRO  5U ///!< MPU Access Permission privileged access read-only
+#define ARM_MPU_AP_RO   6U ///!< MPU Access Permission read-only access
+
+/** MPU Region Base Address Register Value
+*
+* \param Region The region to be configured, number 0 to 15.
+* \param BaseAddress The base address for the region.
+*/
+#define ARM_MPU_RBAR(Region, BaseAddress) \
+  (((BaseAddress) & MPU_RBAR_ADDR_Msk) |  \
+   ((Region) & MPU_RBAR_REGION_Msk)    |  \
+   (MPU_RBAR_VALID_Msk))
+
+/**
+* MPU Memory Access Attributes
+* 
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+*/  
+#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable)   \
+  ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk)                 | \
+   (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk)                      | \
+   (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk)                      | \
+   (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
+
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param AccessAttributes  Memory access attribution, see \ref ARM_MPU_ACCESS_.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/
+#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size)      \
+  ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk)                                          | \
+   (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk)                                      | \
+   (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
+  
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/                         
+#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
+  ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
+
+/**
+* MPU Memory Access Attribute for strongly ordered memory.
+*  - TEX: 000b
+*  - Shareable
+*  - Non-cacheable
+*  - Non-bufferable
+*/ 
+#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
+
+/**
+* MPU Memory Access Attribute for device memory.
+*  - TEX: 000b (if non-shareable) or 010b (if shareable)
+*  - Shareable or non-shareable
+*  - Non-cacheable
+*  - Bufferable (if shareable) or non-bufferable (if non-shareable)
+*
+* \param IsShareable Configures the device memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
+
+/**
+* MPU Memory Access Attribute for normal memory.
+*  - TEX: 1BBb (reflecting outer cacheability rules)
+*  - Shareable or non-shareable
+*  - Cacheable or non-cacheable (reflecting inner cacheability rules)
+*  - Bufferable or non-bufferable (reflecting inner cacheability rules)
+*
+* \param OuterCp Configures the outer cache policy.
+* \param InnerCp Configures the inner cache policy.
+* \param IsShareable Configures the memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
+
+/**
+* MPU Memory Access Attribute non-cacheable policy.
+*/
+#define ARM_MPU_CACHEP_NOCACHE 0U
+
+/**
+* MPU Memory Access Attribute write-back, write and read allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_WRA 1U
+
+/**
+* MPU Memory Access Attribute write-through, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WT_NWA 2U
+
+/**
+* MPU Memory Access Attribute write-back, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_NWA 3U
+
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR; //!< The region base address register value (RBAR)
+  uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  MPU->RNR = rnr;
+  MPU->RASR = 0U;
+}
+
+/** Configure an MPU region.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
+{
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
+{
+  MPU->RNR = rnr;
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  while (cnt > MPU_TYPE_RALIASES) {
+    orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
+    table += MPU_TYPE_RALIASES;
+    cnt -= MPU_TYPE_RALIASES;
+  }
+  orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
+}
+
+#endif

diode_tester/Drivers/CMSIS/Include/mpu_armv8.h

@@ -0,0 +1,333 @@
+/******************************************************************************
+ * @file     mpu_armv8.h
+ * @brief    CMSIS MPU API for Armv8-M MPU
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+
+#ifndef ARM_MPU_ARMV8_H
+#define ARM_MPU_ARMV8_H
+
+/** \brief Attribute for device memory (outer only) */
+#define ARM_MPU_ATTR_DEVICE                           ( 0U )
+
+/** \brief Attribute for non-cacheable, normal memory */
+#define ARM_MPU_ATTR_NON_CACHEABLE                    ( 4U )
+
+/** \brief Attribute for normal memory (outer and inner)
+* \param NT Non-Transient: Set to 1 for non-transient data.
+* \param WB Write-Back: Set to 1 to use write-back update policy.
+* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
+* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
+*/
+#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
+  (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
+
+/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
+
+/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGnRE  (1U)
+
+/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_nGRE   (2U)
+
+/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
+#define ARM_MPU_ATTR_DEVICE_GRE    (3U)
+
+/** \brief Memory Attribute
+* \param O Outer memory attributes
+* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
+*/
+#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
+
+/** \brief Normal memory non-shareable  */
+#define ARM_MPU_SH_NON   (0U)
+
+/** \brief Normal memory outer shareable  */
+#define ARM_MPU_SH_OUTER (2U)
+
+/** \brief Normal memory inner shareable  */
+#define ARM_MPU_SH_INNER (3U)
+
+/** \brief Memory access permissions
+* \param RO Read-Only: Set to 1 for read-only memory.
+* \param NP Non-Privileged: Set to 1 for non-privileged memory.
+*/
+#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
+
+/** \brief Region Base Address Register value
+* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
+* \param SH Defines the Shareability domain for this memory region.
+* \param RO Read-Only: Set to 1 for a read-only memory region.
+* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
+* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
+*/
+#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
+  ((BASE & MPU_RBAR_BASE_Msk) | \
+  ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
+  ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
+  ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
+
+/** \brief Region Limit Address Register value
+* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
+* \param IDX The attribute index to be associated with this memory region.
+*/
+#define ARM_MPU_RLAR(LIMIT, IDX) \
+  ((LIMIT & MPU_RLAR_LIMIT_Msk) | \
+  ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
+  (MPU_RLAR_EN_Msk))
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR;                   /*!< Region Base Address Register value */
+  uint32_t RLAR;                   /*!< Region Limit Address Register value */
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+#ifdef MPU_NS
+/** Enable the Non-secure MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the Non-secure MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable_NS(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU_NS->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+#endif
+
+/** Set the memory attribute encoding to the given MPU.
+* \param mpu Pointer to the MPU to be configured.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
+{
+  const uint8_t reg = idx / 4U;
+  const uint32_t pos = ((idx % 4U) * 8U);
+  const uint32_t mask = 0xFFU << pos;
+  
+  if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
+    return; // invalid index
+  }
+  
+  mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
+}
+
+/** Set the memory attribute encoding.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU, idx, attr);
+}
+
+#ifdef MPU_NS
+/** Set the memory attribute encoding to the Non-secure MPU.
+* \param idx The attribute index to be set [0-7]
+* \param attr The attribute value to be set.
+*/
+__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
+{
+  ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
+}
+#endif
+
+/** Clear and disable the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
+{
+  mpu->RNR = rnr;
+  mpu->RLAR = 0U;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  ARM_MPU_ClrRegionEx(MPU, rnr);
+}
+
+#ifdef MPU_NS
+/** Clear and disable the given Non-secure MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
+{  
+  ARM_MPU_ClrRegionEx(MPU_NS, rnr);
+}
+#endif
+
+/** Configure the given MPU region of the given MPU.
+* \param mpu Pointer to MPU to be used.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  mpu->RNR = rnr;
+  mpu->RBAR = rbar;
+  mpu->RLAR = rlar;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
+}
+
+#ifdef MPU_NS
+/** Configure the given Non-secure MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rlar Value for RLAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
+{
+  ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);  
+}
+#endif
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table to the given MPU.
+* \param mpu Pointer to the MPU registers to be used.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  if (cnt == 1U) {
+    mpu->RNR = rnr;
+    orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
+  } else {
+    uint32_t rnrBase   = rnr & ~(MPU_TYPE_RALIASES-1U);
+    uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
+    
+    mpu->RNR = rnrBase;
+    while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
+      uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
+      orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
+      table += c;
+      cnt -= c;
+      rnrOffset = 0U;
+      rnrBase += MPU_TYPE_RALIASES;
+      mpu->RNR = rnrBase;
+    }
+    
+    orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU, rnr, table, cnt);
+}
+
+#ifdef MPU_NS
+/** Load the given number of MPU regions from a table to the Non-secure MPU.
+* \param rnr First region number to be configured.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
+}
+#endif
+
+#endif
+

diode_tester/Drivers/CMSIS/Include/tz_context.h

@@ -0,0 +1,70 @@
+/******************************************************************************
+ * @file     tz_context.h
+ * @brief    Context Management for Armv8-M TrustZone
+ * @version  V1.0.1
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef TZ_CONTEXT_H
+#define TZ_CONTEXT_H
+ 
+#include <stdint.h>
+ 
+#ifndef TZ_MODULEID_T
+#define TZ_MODULEID_T
+/// \details Data type that identifies secure software modules called by a process.
+typedef uint32_t TZ_ModuleId_t;
+#endif
+ 
+/// \details TZ Memory ID identifies an allocated memory slot.
+typedef uint32_t TZ_MemoryId_t;
+  
+/// Initialize secure context memory system
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_InitContextSystem_S (void);
+ 
+/// Allocate context memory for calling secure software modules in TrustZone
+/// \param[in]  module   identifies software modules called from non-secure mode
+/// \return value != 0 id TrustZone memory slot identifier
+/// \return value 0    no memory available or internal error
+TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
+ 
+/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
+ 
+/// Load secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
+ 
+/// Store secure context (called on RTOS thread context switch)
+/// \param[in]  id  TrustZone memory slot identifier
+/// \return execution status (1: success, 0: error)
+uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
+ 
+#endif  // TZ_CONTEXT_H

diode_tester/Drivers/CMSIS/LICENSE.txt

@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "{}"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright {yyyy} {name of copyright owner}
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h

@@ -0,0 +1,357 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the HAL
+  *          module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_H
+#define __STM32F1xx_HAL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_conf.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HAL
+  * @{
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+  * @{
+  */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+  * @{
+  */
+typedef enum
+{
+  HAL_TICK_FREQ_10HZ         = 100U,
+  HAL_TICK_FREQ_100HZ        = 10U,
+  HAL_TICK_FREQ_1KHZ         = 1U,
+  HAL_TICK_FREQ_DEFAULT      = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+  * @}
+  */
+/* Exported types ------------------------------------------------------------*/
+extern __IO uint32_t uwTick;
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+  * @{
+  */
+
+/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
+  * @brief   Freeze/Unfreeze Peripherals in Debug mode
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @{
+  */
+
+/* Peripherals on APB1 */
+/**
+  * @brief  TIM2 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
+
+/**
+  * @brief  TIM3 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM3()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM3()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
+
+#if defined (DBGMCU_CR_DBG_TIM4_STOP)
+/**
+  * @brief  TIM4 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM4()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM4()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM5_STOP)
+/**
+  * @brief  TIM5 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM5()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM5()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM6_STOP)
+/**
+  * @brief  TIM6 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM6()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM6()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM7_STOP)
+/**
+  * @brief  TIM7 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM7()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM7()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM12_STOP)
+/**
+  * @brief  TIM12 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM12()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM12()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM13_STOP)
+/**
+  * @brief  TIM13 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM13()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM13()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM14_STOP)
+/**
+  * @brief  TIM14 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM14()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM14()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
+#endif
+
+/**
+  * @brief  WWDG Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_WWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
+#define __HAL_DBGMCU_UNFREEZE_WWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
+
+/**
+  * @brief  IWDG Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_IWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
+#define __HAL_DBGMCU_UNFREEZE_IWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
+
+/**
+  * @brief  I2C1 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
+
+#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
+/**
+  * @brief  I2C2 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
+#endif
+
+#if defined (DBGMCU_CR_DBG_CAN1_STOP)
+/**
+  * @brief  CAN1 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_CAN1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_CAN1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_CAN2_STOP)
+/**
+  * @brief  CAN2 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_CAN2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
+#define __HAL_DBGMCU_UNFREEZE_CAN2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
+#endif
+
+/* Peripherals on APB2 */
+#if defined (DBGMCU_CR_DBG_TIM1_STOP)
+/**
+  * @brief  TIM1 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM8_STOP)
+/**
+  * @brief  TIM8 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM8()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM8()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM9_STOP)
+/**
+  * @brief  TIM9 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM9()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM9()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM10_STOP)
+/**
+  * @brief  TIM10 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM10()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM10()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM11_STOP)
+/**
+  * @brief  TIM11 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM11()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM11()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
+#endif
+
+
+#if defined (DBGMCU_CR_DBG_TIM15_STOP)
+/**
+  * @brief  TIM15 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM15()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM15()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM16_STOP)
+/**
+  * @brief  TIM16 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM16()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM16()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
+#endif
+
+#if defined (DBGMCU_CR_DBG_TIM17_STOP)
+/**
+  * @brief  TIM17 Peripherals Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM17()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_UNFREEZE_TIM17()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+  * @{
+  */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ)  || \
+                           ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+                           ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+  * @{
+  */
+/** @addtogroup HAL_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
+/**
+  * @}
+  */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_H */
+
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h

@@ -0,0 +1,706 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_adc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of ADC HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_ADC_EX_H
+#define __STM32F1xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"  
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup ADCEx_Exported_Types ADCEx Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  ADC Configuration injected Channel structure definition
+  * @note   Parameters of this structure are shared within 2 scopes:
+  *          - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+  *          - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+  *            AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+  * @note   The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+  *         ADC state can be either:
+  *          - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv')
+  *          - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group.
+  */
+typedef struct 
+{
+  uint32_t InjectedChannel;                       /*!< Selection of ADC channel to configure
+                                                       This parameter can be a value of @ref ADC_channels
+                                                       Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability.
+                                                       Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor)
+                                                       Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger.
+                                                             It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel.
+                                                             Refer to errata sheet of these devices for more details. */
+  uint32_t InjectedRank;                          /*!< Rank in the injected group sequencer
+                                                       This parameter must be a value of @ref ADCEx_injected_rank
+                                                       Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+  uint32_t InjectedSamplingTime;                  /*!< Sampling time value to be set for the selected channel.
+                                                       Unit: ADC clock cycles
+                                                       Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+                                                       This parameter can be a value of @ref ADC_sampling_times
+                                                       Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+                                                                If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+                                                       Note: In case of usage of internal measurement channels (VrefInt/TempSensor),
+                                                             sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                                             Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */
+  uint32_t InjectedOffset;                        /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+                                                       Offset value must be a positive number.
+                                                       Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+                                                       this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+  uint32_t InjectedNbrOfConversion;               /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+                                                       To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                                       This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+  FunctionalState InjectedDiscontinuousConvMode;  /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                                       Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                                       Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                                       This parameter can be set to ENABLE or DISABLE.
+                                                       Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+  FunctionalState AutoInjectedConv;               /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+                                                       This parameter can be set to ENABLE or DISABLE.
+                                                       Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+                                                       Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+                                                       Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+                                                             To maintain JAUTO always enabled, DMA must be configured in circular mode.
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConv;                 /*!< Selects the external event used to trigger the conversion start of injected group.
+                                                       If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+                                                       If set to external trigger source, triggering is on event rising edge.
+                                                       This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+                                                       Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+                                                             If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+                                                       Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                                configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/** 
+  * @brief  Structure definition of ADC multimode
+  * @note   The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group).
+  *         State of ADCs of the common group must be: disabled.
+  */
+typedef struct
+{
+  uint32_t Mode;              /*!< Configures the ADC to operate in independent or multi mode. 
+                                   This parameter can be a value of @ref ADCEx_Common_mode
+                                   Note: In dual mode, a change of channel configuration generates a restart that can produce a loss of synchronization. It is recommended to disable dual mode before any configuration change.
+                                   Note: In case of simultaneous mode used: Exactly the same sampling time should be configured for the 2 channels that will be sampled simultaneously by ACD1 and ADC2.
+                                   Note: In case of interleaved mode used: To avoid overlap between conversions, maximum sampling time allowed is 7 ADC clock cycles for fast interleaved mode and 14 ADC clock cycles for slow interleaved mode.
+                                   Note: Some multimode parameters are fixed on STM32F1 and can be configured on other STM32 devices with several ADC (multimode configuration structure can have additional parameters).
+                                         The equivalences are:
+                                           - Parameter 'DMAAccessMode': On STM32F1, this parameter is fixed to 1 DMA channel (one DMA channel for both ADC, DMA of ADC master). On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_DMAACCESSMODE_12_10_BITS'.
+                                           - Parameter 'TwoSamplingDelay': On STM32F1, this parameter is fixed to 7 or 14 ADC clock cycles depending on fast or slow interleaved mode selected. On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_TWOSAMPLINGDELAY_7CYCLES' (for fast interleaved mode). */
+
+  
+}ADC_MultiModeTypeDef;                                                          
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @}
+  */
+
+
+/* Exported constants --------------------------------------------------------*/
+   
+/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_injected_rank ADCEx rank into injected group
+  * @{
+  */
+#define ADC_INJECTED_RANK_1                           0x00000001U
+#define ADC_INJECTED_RANK_2                           0x00000002U
+#define ADC_INJECTED_RANK_3                           0x00000003U
+#define ADC_INJECTED_RANK_4                           0x00000004U
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group
+  * @{
+  */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE           0x00000000U
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING         ((uint32_t)ADC_CR2_JEXTTRIG)
+/**
+  * @}
+  */
+    
+/** @defgroup ADC_External_trigger_source_Regular ADC External trigger selection for regular group
+  * @{
+  */
+/*!< List of external triggers with generic trigger name, independently of    */
+/* ADC target, sorted by trigger name:                                        */
+
+/*!< External triggers of regular group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGCONV_T1_CC1         ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2         ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T2_CC2         ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T3_TRGO        ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC4         ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_EXT_IT11       ADC1_2_EXTERNALTRIG_EXT_IT11
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/*!< External triggers of regular group for ADC3 only */
+#define ADC_EXTERNALTRIGCONV_T2_CC3         ADC3_EXTERNALTRIG_T2_CC3
+#define ADC_EXTERNALTRIGCONV_T3_CC1         ADC3_EXTERNALTRIG_T3_CC1
+#define ADC_EXTERNALTRIGCONV_T5_CC1         ADC3_EXTERNALTRIG_T5_CC1
+#define ADC_EXTERNALTRIGCONV_T5_CC3         ADC3_EXTERNALTRIG_T5_CC3
+#define ADC_EXTERNALTRIGCONV_T8_CC1         ADC3_EXTERNALTRIG_T8_CC1
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/*!< External triggers of regular group for all ADC instances */
+#define ADC_EXTERNALTRIGCONV_T1_CC3         ADC1_2_3_EXTERNALTRIG_T1_CC3
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/*!< Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and   */
+/*         XL-density devices.                                                */
+/*         To use it on ADC or ADC2, a remap of trigger must be done from     */
+/*         EXTI line 11 to TIM8_TRGO with macro:                              */
+/*           __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE()                           */
+/*           __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE()                           */
+
+/* Note for internal constant value management: If TIM8_TRGO is available,    */
+/* its definition is set to value for ADC1&ADC2 by default and changed to     */
+/* value for ADC3 by HAL ADC driver if ADC3 is selected.                      */
+#define ADC_EXTERNALTRIGCONV_T8_TRGO        ADC1_2_EXTERNALTRIG_T8_TRGO
+#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#define ADC_SOFTWARE_START                  ADC1_2_3_SWSTART
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger selection for injected group
+  * @{
+  */
+/*!< List of external triggers with generic trigger name, independently of    */
+/* ADC target, sorted by trigger name:                                        */
+
+/*!< External triggers of injected group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO        ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1         ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4         ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO        ADC1_2_EXTERNALTRIGINJEC_T4_TRGO 
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15       ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/*!< External triggers of injected group for ADC3 only */
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3         ADC3_EXTERNALTRIGINJEC_T4_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2         ADC3_EXTERNALTRIGINJEC_T8_CC2
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO        ADC3_EXTERNALTRIGINJEC_T5_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4         ADC3_EXTERNALTRIGINJEC_T5_CC4
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/*!< External triggers of injected group for all ADC instances */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4         ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO        ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/*!< Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and    */
+/*         XL-density devices.                                                */
+/*         To use it on ADC1 or ADC2, a remap of trigger must be done from    */
+/*         EXTI line 11 to TIM8_CC4 with macro:                               */
+/*           __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE()                           */
+/*           __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE()                           */
+
+/* Note for internal constant value management: If TIM8_CC4 is available,     */
+/* its definition is set to value for ADC1&ADC2 by default and changed to     */
+/* value for ADC3 by HAL ADC driver if ADC3 is selected.                      */
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4         ADC1_2_EXTERNALTRIGINJEC_T8_CC4
+#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#define ADC_INJECTED_SOFTWARE_START              ADC1_2_3_JSWSTART
+/**
+  * @}
+  */
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/** @defgroup ADCEx_Common_mode ADC Extended Dual ADC Mode
+  * @{
+  */
+#define ADC_MODE_INDEPENDENT                              0x00000000U                                                                     /*!< ADC dual mode disabled (ADC independent mode) */
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT    ((uint32_t)(                                                            ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined regular simultaneous + injected simultaneous mode, on groups regular and injected */
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG      ((uint32_t)(                                        ADC_CR1_DUALMOD_1                    )) /*!< ADC dual mode enabled: Combined regular simultaneous + alternate trigger mode, on groups regular and injected */
+#define ADC_DUALMODE_INJECSIMULT_INTERLFAST   ((uint32_t)(                                        ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined injected simultaneous + fast interleaved mode, on groups regular and injected (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INJECSIMULT_INTERLSLOW   ((uint32_t)(                    ADC_CR1_DUALMOD_2                                        )) /*!< ADC dual mode enabled: Combined injected simultaneous + slow Interleaved mode, on groups regular and injected (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INJECSIMULT              ((uint32_t)(                    ADC_CR1_DUALMOD_2 |                     ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Injected simultaneous mode, on group injected */
+#define ADC_DUALMODE_REGSIMULT                ((uint32_t)(                    ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1                    )) /*!< ADC dual mode enabled: Regular simultaneous mode, on group regular */
+#define ADC_DUALMODE_INTERLFAST               ((uint32_t)(                    ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Fast interleaved mode, on group regular (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INTERLSLOW               ((uint32_t)(ADC_CR1_DUALMOD_3                                                            )) /*!< ADC dual mode enabled: Slow interleaved mode, on group regular (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_ALTERTRIG                ((uint32_t)(ADC_CR1_DUALMOD_3 |                                         ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Alternate trigger mode, on group injected */
+/**
+  * @}
+  */
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @}
+  */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup ADCEx_Private_Constants ADCEx Private Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended Internal HAL driver trigger selection for regular group
+  * @{
+  */
+/* List of external triggers of regular group for ADC1, ADC2, ADC3 (if ADC    */
+/* instance is available on the selected device).                             */
+/* (used internally by HAL driver. To not use into HAL structure parameters)  */
+
+/* External triggers of regular group for ADC1&ADC2 (if ADCx available) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1                       0x00000000U
+#define ADC1_2_EXTERNALTRIG_T1_CC2           ((uint32_t)(                                      ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T2_CC2           ((uint32_t)(                   ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO          ((uint32_t)(ADC_CR2_EXTSEL_2                                      ))
+#define ADC1_2_EXTERNALTRIG_T4_CC4           ((uint32_t)(ADC_CR2_EXTSEL_2 |                    ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11         ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1                   ))
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
+/* Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and     */
+/* XL-density devices.                                                        */
+#define ADC1_2_EXTERNALTRIG_T8_TRGO          ADC1_2_EXTERNALTRIG_EXT_IT11
+#endif
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/* External triggers of regular group for ADC3 */
+#define ADC3_EXTERNALTRIG_T3_CC1             ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC3_EXTERNALTRIG_T2_CC3             ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC3_EXTERNALTRIG_T8_CC1             ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC3_EXTERNALTRIG_T8_TRGO            ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC3_EXTERNALTRIG_T5_CC1             ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC3_EXTERNALTRIG_T5_CC3             ADC1_2_EXTERNALTRIG_EXT_IT11
+#endif
+
+/* External triggers of regular group for ADC1&ADC2&ADC3 (if ADCx available) */
+#define ADC1_2_3_EXTERNALTRIG_T1_CC3         ((uint32_t)(                   ADC_CR2_EXTSEL_1                   ))
+#define ADC1_2_3_SWSTART                     ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended Internal HAL driver trigger selection for injected group
+  * @{
+  */
+/* List of external triggers of injected group for ADC1, ADC2, ADC3 (if ADC    */
+/* instance is available on the selected device).                             */
+/* (used internally by HAL driver. To not use into HAL structure parameters)  */
+
+/* External triggers of injected group for ADC1&ADC2 (if ADCx available) */
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO          ((uint32_t)(                    ADC_CR2_JEXTSEL_1                    ))
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1           ((uint32_t)(                    ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_2                                        ))
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_2 |                     ADC_CR2_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15         ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1                    ))
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
+/* Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and      */
+/* XL-density devices.                                                        */
+#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4           ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+#endif
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/* External triggers of injected group for ADC3 */
+#define ADC3_EXTERNALTRIGINJEC_T4_CC3             ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC3_EXTERNALTRIGINJEC_T8_CC2             ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC3_EXTERNALTRIGINJEC_T8_CC4             ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC3_EXTERNALTRIGINJEC_T5_TRGO            ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC3_EXTERNALTRIGINJEC_T5_CC4             ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/* External triggers of injected group for ADC1&ADC2&ADC3 (if ADCx available) */
+#define ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO                    0x00000000U
+#define ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4         ((uint32_t)(                                        ADC_CR2_JEXTSEL_0))
+#define ADC1_2_3_JSWSTART                         ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Private_Macro ADCEx Private Macro
+  * @{
+  */
+/* Macro reserved for internal HAL driver usage, not intended to be used in   */
+/* code of final user.                                                        */
+
+    
+/**
+  * @brief For devices with 3 ADCs: Defines the external trigger source 
+  *        for regular group according to ADC into common group ADC1&ADC2 or 
+  *        ADC3 (some triggers with same source have different value to
+  *        be programmed into ADC EXTSEL bits of CR2 register).
+  *        For devices with 2 ADCs or less: this macro makes no change.
+  * @param __HANDLE__: ADC handle
+  * @param __EXT_TRIG_CONV__: External trigger selected for regular group.
+  * @retval External trigger to be programmed into EXTSEL bits of CR2 register
+  */
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__)                         \
+ (( (((__HANDLE__)->Instance) == ADC3)                                         \
+  )?                                                                           \
+   ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO                     \
+     )?                                                                        \
+      (ADC3_EXTERNALTRIG_T8_TRGO)                                              \
+      :                                                                        \
+      (__EXT_TRIG_CONV__)                                                      \
+   )                                                                           \
+   :                                                                           \
+   (__EXT_TRIG_CONV__)                                                         \
+ )
+#else
+#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__)                         \
+  (__EXT_TRIG_CONV__)
+#endif /* STM32F103xE || STM32F103xG */
+
+/**
+  * @brief For devices with 3 ADCs: Defines the external trigger source 
+  *        for injected group according to ADC into common group ADC1&ADC2 or 
+  *        ADC3 (some triggers with same source have different value to
+  *        be programmed into ADC JEXTSEL bits of CR2 register).
+  *        For devices with 2 ADCs or less: this macro makes no change.
+  * @param __HANDLE__: ADC handle
+  * @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group.
+  * @retval External trigger to be programmed into JEXTSEL bits of CR2 register
+  */
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__)                  \
+ (( (((__HANDLE__)->Instance) == ADC3)                                         \
+  )?                                                                           \
+   ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4           \
+     )?                                                                        \
+      (ADC3_EXTERNALTRIGINJEC_T8_CC4)                                          \
+      :                                                                        \
+      (__EXT_TRIG_INJECTCONV__)                                                \
+   )                                                                           \
+   :                                                                           \
+   (__EXT_TRIG_INJECTCONV__)                                                   \
+ )
+#else
+#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__)                  \
+   (__EXT_TRIG_INJECTCONV__)
+#endif /* STM32F103xE || STM32F103xG */
+
+
+/**
+  * @brief Verification if multimode is enabled for the selected ADC (multimode ADC master or ADC slave) (applicable for devices with several ADCs)
+  * @param __HANDLE__: ADC handle
+  * @retval Multimode state: RESET if multimode is disabled, other value if multimode is enabled
+  */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__)                                    \
+ (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)   \
+  )?                                                                           \
+   (ADC1->CR1 & ADC_CR1_DUALMOD)                                               \
+   :                                                                           \
+   (RESET)                                                                     \
+ )
+#else
+#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__)                                    \
+  (RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs)
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__)                        \
+  (( (((__HANDLE__)->Instance) == ADC2)                                        \
+   )?                                                                          \
+    ((ADC1->CR1 & ADC_CR1_DUALMOD) == RESET)                                   \
+    :                                                                          \
+    (!RESET)                                                                   \
+  )
+#else
+#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__)                        \
+  (!RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @brief Check ADC multimode setting: In case of multimode, check whether ADC master of the selected ADC has feature auto-injection enabled (applicable for devices with several ADCs)
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__)                                \
+  (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)  \
+   )?                                                                          \
+    (ADC1->CR1 & ADC_CR1_JAUTO)                                                \
+    :                                                                          \
+    (RESET)                                                                    \
+  )
+#else
+#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__)                                \
+  (RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/**
+  * @brief Set handle of the other ADC sharing the common multimode settings
+  * @param __HANDLE__: ADC handle
+  * @param __HANDLE_OTHER_ADC__: other ADC handle
+  * @retval None
+  */
+#define ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__)                 \
+  ((__HANDLE_OTHER_ADC__)->Instance = ADC2)
+
+/**
+  * @brief Set handle of the ADC slave associated to the ADC master
+  * On STM32F1 devices, ADC slave is always ADC2 (this can be different
+  * on other STM32 devices)
+  * @param __HANDLE_MASTER__: ADC master handle
+  * @param __HANDLE_SLAVE__: ADC slave handle
+  * @retval None
+  */
+#define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__)                   \
+  ((__HANDLE_SLAVE__)->Instance = ADC2)
+       
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+                                       ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+                                       ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+                                       ((CHANNEL) == ADC_INJECTED_RANK_4))
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE)  || \
+                                        ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING))
+
+/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification
+  * @{
+  */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH)  (((LENGTH) >= 1U) && ((LENGTH) <= 4U))
+/**
+  * @}
+  */
+
+#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F101xE)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO)   || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F101xG)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO)   || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11)  || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3)    || \
+                                 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO)   || \
+                                 ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+
+#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F101xE)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4)   || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F101xG)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                      ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4)   || \
+                                      ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT)                || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT)  || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG)    || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLFAST) || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLSLOW) || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT)            || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT)              || \
+                           ((MODE) == ADC_DUALMODE_INTERLFAST)             || \
+                           ((MODE) == ADC_DUALMODE_INTERLSLOW)             || \
+                           ((MODE) == ADC_DUALMODE_ALTERTRIG) )
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+  * @}
+  */      
+   
+    
+
+    
+    
+   
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+  * @{
+  */
+
+/* IO operation functions  *****************************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* ADC calibration */
+HAL_StatusTypeDef       HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef       HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/* ADC multimode */
+HAL_StatusTypeDef       HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef       HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc); 
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t                HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+uint32_t                HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc);
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
+void                    HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+/**
+  * @}
+  */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef       HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+HAL_StatusTypeDef       HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode);
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_ADC_EX_H */

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h

@@ -0,0 +1,410 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CORTEX_H
+#define __STM32F1xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */ 
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1U)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+  * @brief  MPU Region initialization structure 
+  * @{
+  */
+typedef struct
+{
+  uint8_t                Enable;                /*!< Specifies the status of the region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Enable                 */
+  uint8_t                Number;                /*!< Specifies the number of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Number                 */
+  uint32_t               BaseAddress;           /*!< Specifies the base address of the region to protect.                           */
+  uint8_t                Size;                  /*!< Specifies the size of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Size                   */
+  uint8_t                SubRegionDisable;      /*!< Specifies the number of the subregion protection to disable. 
+                                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF    */         
+  uint8_t                TypeExtField;          /*!< Specifies the TEX field level.
+                                                     This parameter can be a value of @ref CORTEX_MPU_TEX_Levels                    */                 
+  uint8_t                AccessPermission;      /*!< Specifies the region access permission type. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes  */
+  uint8_t                DisableExec;           /*!< Specifies the instruction access status. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Instruction_Access            */
+  uint8_t                IsShareable;           /*!< Specifies the shareability status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Shareable              */
+  uint8_t                IsCacheable;           /*!< Specifies the cacheable status of the region protected. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable              */
+  uint8_t                IsBufferable;          /*!< Specifies the bufferable status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable             */
+}MPU_Region_InitTypeDef;
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+  * @{
+  */
+#define NVIC_PRIORITYGROUP_0         0x00000007U /*!< 0 bits for pre-emption priority
+                                                      4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         0x00000006U /*!< 1 bits for pre-emption priority
+                                                      3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         0x00000005U /*!< 2 bits for pre-emption priority
+                                                      2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         0x00000004U /*!< 3 bits for pre-emption priority
+                                                      1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4         0x00000003U /*!< 4 bits for pre-emption priority
+                                                      0 bits for subpriority */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source 
+  * @{
+  */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8    0x00000000U
+#define SYSTICK_CLKSOURCE_HCLK         0x00000004U
+
+/**
+  * @}
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+  * @{
+  */
+#define  MPU_HFNMI_PRIVDEF_NONE           0x00000000U
+#define  MPU_HARDFAULT_NMI                MPU_CTRL_HFNMIENA_Msk
+#define  MPU_PRIVILEGED_DEFAULT           MPU_CTRL_PRIVDEFENA_Msk
+#define  MPU_HFNMI_PRIVDEF               (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+  * @{
+  */
+#define  MPU_REGION_ENABLE     ((uint8_t)0x01)
+#define  MPU_REGION_DISABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+  * @{
+  */
+#define  MPU_INSTRUCTION_ACCESS_ENABLE      ((uint8_t)0x00)
+#define  MPU_INSTRUCTION_ACCESS_DISABLE     ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+  * @{
+  */
+#define  MPU_ACCESS_SHAREABLE        ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_SHAREABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+  * @{
+  */
+#define  MPU_ACCESS_CACHEABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_CACHEABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+  * @{
+  */
+#define  MPU_ACCESS_BUFFERABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_BUFFERABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+  * @{
+  */
+#define  MPU_TEX_LEVEL0    ((uint8_t)0x00)
+#define  MPU_TEX_LEVEL1    ((uint8_t)0x01)
+#define  MPU_TEX_LEVEL2    ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+  * @{
+  */
+#define   MPU_REGION_SIZE_32B      ((uint8_t)0x04)
+#define   MPU_REGION_SIZE_64B      ((uint8_t)0x05)
+#define   MPU_REGION_SIZE_128B     ((uint8_t)0x06)
+#define   MPU_REGION_SIZE_256B     ((uint8_t)0x07)
+#define   MPU_REGION_SIZE_512B     ((uint8_t)0x08)
+#define   MPU_REGION_SIZE_1KB      ((uint8_t)0x09)
+#define   MPU_REGION_SIZE_2KB      ((uint8_t)0x0A)
+#define   MPU_REGION_SIZE_4KB      ((uint8_t)0x0B)
+#define   MPU_REGION_SIZE_8KB      ((uint8_t)0x0C)
+#define   MPU_REGION_SIZE_16KB     ((uint8_t)0x0D)
+#define   MPU_REGION_SIZE_32KB     ((uint8_t)0x0E)
+#define   MPU_REGION_SIZE_64KB     ((uint8_t)0x0F)
+#define   MPU_REGION_SIZE_128KB    ((uint8_t)0x10)
+#define   MPU_REGION_SIZE_256KB    ((uint8_t)0x11)
+#define   MPU_REGION_SIZE_512KB    ((uint8_t)0x12)
+#define   MPU_REGION_SIZE_1MB      ((uint8_t)0x13)
+#define   MPU_REGION_SIZE_2MB      ((uint8_t)0x14)
+#define   MPU_REGION_SIZE_4MB      ((uint8_t)0x15)
+#define   MPU_REGION_SIZE_8MB      ((uint8_t)0x16)
+#define   MPU_REGION_SIZE_16MB     ((uint8_t)0x17)
+#define   MPU_REGION_SIZE_32MB     ((uint8_t)0x18)
+#define   MPU_REGION_SIZE_64MB     ((uint8_t)0x19)
+#define   MPU_REGION_SIZE_128MB    ((uint8_t)0x1A)
+#define   MPU_REGION_SIZE_256MB    ((uint8_t)0x1B)
+#define   MPU_REGION_SIZE_512MB    ((uint8_t)0x1C)
+#define   MPU_REGION_SIZE_1GB      ((uint8_t)0x1D)
+#define   MPU_REGION_SIZE_2GB      ((uint8_t)0x1E)
+#define   MPU_REGION_SIZE_4GB      ((uint8_t)0x1F)
+/**
+  * @}
+  */
+   
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes 
+  * @{
+  */
+#define  MPU_REGION_NO_ACCESS      ((uint8_t)0x00)
+#define  MPU_REGION_PRIV_RW        ((uint8_t)0x01)
+#define  MPU_REGION_PRIV_RW_URO    ((uint8_t)0x02)
+#define  MPU_REGION_FULL_ACCESS    ((uint8_t)0x03)
+#define  MPU_REGION_PRIV_RO        ((uint8_t)0x05)
+#define  MPU_REGION_PRIV_RO_URO    ((uint8_t)0x06)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+  * @{
+  */
+#define  MPU_REGION_NUMBER0    ((uint8_t)0x00)
+#define  MPU_REGION_NUMBER1    ((uint8_t)0x01)
+#define  MPU_REGION_NUMBER2    ((uint8_t)0x02)
+#define  MPU_REGION_NUMBER3    ((uint8_t)0x03)
+#define  MPU_REGION_NUMBER4    ((uint8_t)0x04)
+#define  MPU_REGION_NUMBER5    ((uint8_t)0x05)
+#define  MPU_REGION_NUMBER6    ((uint8_t)0x06)
+#define  MPU_REGION_NUMBER7    ((uint8_t)0x07)
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup CORTEX_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+
+#if (__MPU_PRESENT == 1U)
+void HAL_MPU_Enable(uint32_t MPU_Control);
+void HAL_MPU_Disable(void);
+void HAL_MPU_EnableRegion(uint32_t RegionNumber);
+void HAL_MPU_DisableRegion(uint32_t RegionNumber);
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)         ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                ((IRQ) >= (IRQn_Type)0x00U)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                       ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1U)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+                                     ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+                                          ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE)   (((STATE) == MPU_ACCESS_SHAREABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE)   (((STATE) == MPU_ACCESS_CACHEABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE)   (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0)  || \
+                                ((TYPE) == MPU_TEX_LEVEL1)  || \
+                                ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS)   || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+                                                  ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER)    (((NUMBER) == MPU_REGION_NUMBER0) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER1) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER2) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER3) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER4) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER5) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER6) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE)    (((SIZE) == MPU_REGION_SIZE_32B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_64B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_128B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_256B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_512B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_1KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION)  ((SUBREGION) < (uint16_t)0x00FF)
+#endif /* __MPU_PRESENT */
+
+/**                                                                          
+  * @}                                                                  
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CORTEX_H */
+ 
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h

@@ -0,0 +1,211 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_def.h
+  * @author  MCD Application Team
+  * @brief   This file contains HAL common defines, enumeration, macros and
+  *          structures definitions.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_DEF
+#define __STM32F1xx_HAL_DEF
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include <stddef.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  HAL Status structures definition
+  */
+typedef enum
+{
+  HAL_OK       = 0x00U,
+  HAL_ERROR    = 0x01U,
+  HAL_BUSY     = 0x02U,
+  HAL_TIMEOUT  = 0x03U
+} HAL_StatusTypeDef;
+
+/**
+  * @brief  HAL Lock structures definition
+  */
+typedef enum
+{
+  HAL_UNLOCKED = 0x00U,
+  HAL_LOCKED   = 0x01U
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY      0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) != 0U)
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                      \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0U)
+
+#if !defined(UNUSED)
+#define UNUSED(X) (void)X      /* To avoid gcc/g++ warnings */
+#endif /* UNUSED */
+
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__ specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose:
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+/* Reserved for future use */
+#error "USE_RTOS should be 0 in the current HAL release"
+#else
+#define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0U)
+
+#define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0U)
+#endif /* USE_RTOS */
+
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+#ifndef __weak
+#define __weak  __attribute__((weak))
+#endif
+#ifndef __packed
+#define __packed  __attribute__((packed))
+#endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __weak
+#define __weak   __attribute__((weak))
+#endif /* __weak */
+#ifndef __packed
+#define __packed __attribute__((__packed__))
+#endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif
+#ifndef __ALIGN_END
+#define __ALIGN_END      __attribute__ ((aligned (4)))
+#endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __ALIGN_END
+#define __ALIGN_END    __attribute__ ((aligned (4)))
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif /* __ALIGN_BEGIN */
+#else
+#ifndef __ALIGN_END
+#define __ALIGN_END
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#if defined   (__CC_ARM)      /* ARM Compiler V5*/
+#define __ALIGN_BEGIN    __align(4)
+#elif defined (__ICCARM__)    /* IAR Compiler */
+#define __ALIGN_BEGIN
+#endif /* __CC_ARM */
+#endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+  * @brief  __RAM_FUNC definition
+  */
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+/* ARM Compiler V4/V5 and V6
+   --------------------------
+   RAM functions are defined using the toolchain options.
+   Functions that are executed in RAM should reside in a separate source module.
+   Using the 'Options for File' dialog you can simply change the 'Code / Const'
+   area of a module to a memory space in physical RAM.
+   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+   dialog.
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+   RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined   (  __GNUC__  )
+/* GNU Compiler
+   ------------
+  RAM functions are defined using a specific toolchain attribute
+   "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+  * @brief  __NOINLINE definition
+  */
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined   (  __GNUC__  )
+/* ARM V4/V5 and V6 & GNU Compiler
+   -------------------------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F1xx_HAL_DEF */
+
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h

@@ -0,0 +1,455 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_dma.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_DMA_H
+#define __STM32F1xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+  * @{
+  */
+
+/**
+  * @brief  DMA Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Direction;                 /*!< Specifies if the data will be transferred from memory to peripheral, 
+                                           from memory to memory or from peripheral to memory.
+                                           This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+  uint32_t PeriphInc;                 /*!< Specifies whether the Peripheral address register should be incremented or not.
+                                           This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+  uint32_t MemInc;                    /*!< Specifies whether the memory address register should be incremented or not.
+                                           This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+  uint32_t PeriphDataAlignment;       /*!< Specifies the Peripheral data width.
+                                           This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+  uint32_t MemDataAlignment;          /*!< Specifies the Memory data width.
+                                           This parameter can be a value of @ref DMA_Memory_data_size */
+
+  uint32_t Mode;                      /*!< Specifies the operation mode of the DMAy Channelx.
+                                           This parameter can be a value of @ref DMA_mode
+                                           @note The circular buffer mode cannot be used if the memory-to-memory
+                                                 data transfer is configured on the selected Channel */
+
+  uint32_t Priority;                  /*!< Specifies the software priority for the DMAy Channelx.
+                                           This parameter can be a value of @ref DMA_Priority_level */
+} DMA_InitTypeDef;
+
+/**
+  * @brief  HAL DMA State structures definition
+  */
+typedef enum
+{
+  HAL_DMA_STATE_RESET             = 0x00U,  /*!< DMA not yet initialized or disabled    */
+  HAL_DMA_STATE_READY             = 0x01U,  /*!< DMA initialized and ready for use      */
+  HAL_DMA_STATE_BUSY              = 0x02U,  /*!< DMA process is ongoing                 */
+  HAL_DMA_STATE_TIMEOUT           = 0x03U   /*!< DMA timeout state                      */
+}HAL_DMA_StateTypeDef;
+
+/**
+  * @brief  HAL DMA Error Code structure definition
+  */
+typedef enum
+{
+  HAL_DMA_FULL_TRANSFER           = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_HALF_TRANSFER           = 0x01U     /*!< Half Transfer     */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/** 
+  * @brief  HAL DMA Callback ID structure definition
+  */
+typedef enum
+{
+  HAL_DMA_XFER_CPLT_CB_ID          = 0x00U,    /*!< Full transfer     */
+  HAL_DMA_XFER_HALFCPLT_CB_ID      = 0x01U,    /*!< Half transfer     */
+  HAL_DMA_XFER_ERROR_CB_ID         = 0x02U,    /*!< Error             */ 
+  HAL_DMA_XFER_ABORT_CB_ID         = 0x03U,    /*!< Abort             */ 
+  HAL_DMA_XFER_ALL_CB_ID           = 0x04U     /*!< All               */ 
+    
+}HAL_DMA_CallbackIDTypeDef;
+
+/** 
+  * @brief  DMA handle Structure definition
+  */
+typedef struct __DMA_HandleTypeDef
+{
+  DMA_Channel_TypeDef        *Instance;                                                    /*!< Register base address                  */
+  
+  DMA_InitTypeDef            Init;                                                         /*!< DMA communication parameters           */
+  
+  HAL_LockTypeDef            Lock;                                                         /*!< DMA locking object                     */
+  
+  __IO HAL_DMA_StateTypeDef  State;                                                        /*!< DMA transfer state                     */
+  
+  void                       *Parent;                                                      /*!< Parent object state                    */
+  
+  void                       (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma);     /*!< DMA transfer complete callback         */
+  
+  void                       (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback    */
+  
+  void                       (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer error callback            */
+
+  void                       (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer abort callback            */
+  
+  __IO uint32_t              ErrorCode;                                                    /*!< DMA Error code                         */
+
+  DMA_TypeDef                *DmaBaseAddress;                                             /*!< DMA Channel Base Address               */
+  
+  uint32_t                   ChannelIndex;                                                /*!< DMA Channel Index                      */
+
+} DMA_HandleTypeDef;    
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+  * @{
+  */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+  * @{
+  */
+#define HAL_DMA_ERROR_NONE                     0x00000000U    /*!< No error             */
+#define HAL_DMA_ERROR_TE                       0x00000001U    /*!< Transfer error       */
+#define HAL_DMA_ERROR_NO_XFER                  0x00000004U    /*!< no ongoing transfer  */
+#define HAL_DMA_ERROR_TIMEOUT                  0x00000020U    /*!< Timeout error        */
+#define HAL_DMA_ERROR_NOT_SUPPORTED            0x00000100U    /*!< Not supported mode                    */ 
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+  * @{
+  */
+#define DMA_PERIPH_TO_MEMORY         0x00000000U                 /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH         ((uint32_t)DMA_CCR_DIR)     /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY         ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction     */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+  * @{
+  */
+#define DMA_PINC_ENABLE        ((uint32_t)DMA_CCR_PINC)  /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE       0x00000000U               /*!< Peripheral increment mode Disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+  * @{
+  */
+#define DMA_MINC_ENABLE         ((uint32_t)DMA_CCR_MINC)  /*!< Memory increment mode Enable  */
+#define DMA_MINC_DISABLE        0x00000000U               /*!< Memory increment mode Disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+  * @{
+  */
+#define DMA_PDATAALIGN_BYTE          0x00000000U                  /*!< Peripheral data alignment: Byte     */
+#define DMA_PDATAALIGN_HALFWORD      ((uint32_t)DMA_CCR_PSIZE_0)  /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD          ((uint32_t)DMA_CCR_PSIZE_1)  /*!< Peripheral data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+  * @{
+  */
+#define DMA_MDATAALIGN_BYTE          0x00000000U                  /*!< Memory data alignment: Byte     */
+#define DMA_MDATAALIGN_HALFWORD      ((uint32_t)DMA_CCR_MSIZE_0)  /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD          ((uint32_t)DMA_CCR_MSIZE_1)  /*!< Memory data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_mode DMA mode
+  * @{
+  */
+#define DMA_NORMAL         0x00000000U                  /*!< Normal mode                  */
+#define DMA_CIRCULAR       ((uint32_t)DMA_CCR_CIRC)     /*!< Circular mode                */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+  * @{
+  */
+#define DMA_PRIORITY_LOW             0x00000000U               /*!< Priority level : Low       */
+#define DMA_PRIORITY_MEDIUM          ((uint32_t)DMA_CCR_PL_0)  /*!< Priority level : Medium    */
+#define DMA_PRIORITY_HIGH            ((uint32_t)DMA_CCR_PL_1)  /*!< Priority level : High      */
+#define DMA_PRIORITY_VERY_HIGH       ((uint32_t)DMA_CCR_PL)    /*!< Priority level : Very_High */
+/**
+  * @}
+  */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+  * @{
+  */
+#define DMA_IT_TC                         ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT                         ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE                         ((uint32_t)DMA_CCR_TEIE)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+  * @{
+  */
+#define DMA_FLAG_GL1                      0x00000001U
+#define DMA_FLAG_TC1                      0x00000002U
+#define DMA_FLAG_HT1                      0x00000004U
+#define DMA_FLAG_TE1                      0x00000008U
+#define DMA_FLAG_GL2                      0x00000010U
+#define DMA_FLAG_TC2                      0x00000020U
+#define DMA_FLAG_HT2                      0x00000040U
+#define DMA_FLAG_TE2                      0x00000080U
+#define DMA_FLAG_GL3                      0x00000100U
+#define DMA_FLAG_TC3                      0x00000200U
+#define DMA_FLAG_HT3                      0x00000400U
+#define DMA_FLAG_TE3                      0x00000800U
+#define DMA_FLAG_GL4                      0x00001000U
+#define DMA_FLAG_TC4                      0x00002000U
+#define DMA_FLAG_HT4                      0x00004000U
+#define DMA_FLAG_TE4                      0x00008000U
+#define DMA_FLAG_GL5                      0x00010000U
+#define DMA_FLAG_TC5                      0x00020000U
+#define DMA_FLAG_HT5                      0x00040000U
+#define DMA_FLAG_TE5                      0x00080000U
+#define DMA_FLAG_GL6                      0x00100000U
+#define DMA_FLAG_TC6                      0x00200000U
+#define DMA_FLAG_HT6                      0x00400000U
+#define DMA_FLAG_TE6                      0x00800000U
+#define DMA_FLAG_GL7                      0x01000000U
+#define DMA_FLAG_TC7                      0x02000000U
+#define DMA_FLAG_HT7                      0x04000000U
+#define DMA_FLAG_TE7                      0x08000000U
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+  * @{
+  */
+
+/** @brief  Reset DMA handle state.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+  * @brief  Enable the specified DMA Channel.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE(__HANDLE__)        (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+/**
+  * @brief  Disable the specified DMA Channel.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE(__HANDLE__)       (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+
+/* Interrupt & Flag management */
+
+/**
+  * @brief  Enables the specified DMA Channel interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the specified DMA Channel interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__)))
+
+/**
+  * @brief  Check whether the specified DMA Channel interrupt is enabled or not.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
+  *            @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @retval The state of DMA_IT (SET or RESET).
+  */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+  * @brief  Return the number of remaining data units in the current DMA Channel transfer.
+  * @param  __HANDLE__: DMA handle
+  * @retval The number of remaining data units in the current DMA Channel transfer.
+  */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
+
+/**
+  * @}
+  */
+
+/* Include DMA HAL Extension module */
+#include "stm32f1xx_hal_dma_ex.h"   
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+  * @{
+  */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_PERIPH)  || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+                                            ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE)  || \
+                                        ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE)     || \
+                                           ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+                                           ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE)     || \
+                                       ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+                                       ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL )  || \
+                           ((MODE) == DMA_CIRCULAR))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW )   || \
+                                   ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+                                   ((PRIORITY) == DMA_PRIORITY_HIGH)   || \
+                                   ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_DMA_H */
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h

@@ -0,0 +1,275 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_dma_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_DMA_EX_H
+#define __STM32F1xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMAEx DMAEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros
+  * @{
+  */
+/* Interrupt & Flag management */
+#if defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || \
+    defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/** @defgroup DMAEx_High_density_XL_density_Product_devices DMAEx High density and XL density product devices
+  * @{
+  */
+
+/**
+  * @brief  Returns the current DMA Channel transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer complete flag index.
+  */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+   DMA_FLAG_TC5)
+
+/**
+  * @brief  Returns the current DMA Channel half transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified half transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+   DMA_FLAG_HT5)
+
+/**
+  * @brief  Returns the current DMA Channel transfer error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+   DMA_FLAG_TE5)
+
+/**
+  * @brief  Return the current DMA Channel Global interrupt flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\
+   DMA_FLAG_GL5)
+   
+/**
+  * @brief  Get the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+  (DMA1->ISR & (__FLAG__)))
+
+/**
+  * @brief  Clears the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *         Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+  (DMA1->IFCR = (__FLAG__)))
+
+/**
+  * @}
+  */
+
+#else
+/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices
+  * @{
+  */
+
+/**
+  * @brief  Returns the current DMA Channel transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer complete flag index.
+  */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+   DMA_FLAG_TC7)
+
+/**
+  * @brief  Return the current DMA Channel half transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified half transfer complete flag index.
+  */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+   DMA_FLAG_HT7)
+
+/**
+  * @brief  Return the current DMA Channel transfer error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+   DMA_FLAG_TE7)
+
+/**
+  * @brief  Return the current DMA Channel Global interrupt flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+   DMA_FLAG_GL7)
+
+/**
+  * @brief  Get the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *            @arg DMA_FLAG_GLx:  Global interrupt flag
+  *         Where x can be 1_7 to select the DMA Channel flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)   (DMA1->ISR & (__FLAG__))
+
+/**
+  * @brief  Clear the DMA Channel pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCx:  Transfer complete flag
+  *            @arg DMA_FLAG_HTx:  Half transfer complete flag
+  *            @arg DMA_FLAG_TEx:  Transfer error flag
+  *            @arg DMA_FLAG_GLx:  Global interrupt flag
+  *         Where x can be 1_7 to select the DMA Channel flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+/**
+  * @}
+  */
+
+#endif
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || */
+       /* STM32F103xG || STM32F105xC || STM32F107xC */
+
+#endif /* __STM32F1xx_HAL_DMA_H */
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h

@@ -0,0 +1,318 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_exti.h
+  * @author  MCD Application Team
+  * @brief   Header file of EXTI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_EXTI_H
+#define STM32F1xx_HAL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup EXTI EXTI
+  * @brief EXTI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup EXTI_Exported_Types EXTI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL EXTI common Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_EXTI_COMMON_CB_ID          = 0x00U
+} EXTI_CallbackIDTypeDef;
+
+/**
+  * @brief  EXTI Handle structure definition
+  */
+typedef struct
+{
+  uint32_t Line;                    /*!<  Exti line number */
+  void (* PendingCallback)(void);   /*!<  Exti pending callback */
+} EXTI_HandleTypeDef;
+
+/**
+  * @brief  EXTI Configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Line;      /*!< The Exti line to be configured. This parameter
+                           can be a value of @ref EXTI_Line */
+  uint32_t Mode;      /*!< The Exit Mode to be configured for a core.
+                           This parameter can be a combination of @ref EXTI_Mode */
+  uint32_t Trigger;   /*!< The Exti Trigger to be configured. This parameter
+                           can be a value of @ref EXTI_Trigger */
+  uint32_t GPIOSel;   /*!< The Exti GPIO multiplexer selection to be configured.
+                           This parameter is only possible for line 0 to 15. It
+                           can be a value of @ref EXTI_GPIOSel */
+} EXTI_ConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Line  EXTI Line
+  * @{
+  */
+#define EXTI_LINE_0                        (EXTI_GPIO     | 0x00u)    /*!< External interrupt line 0 */
+#define EXTI_LINE_1                        (EXTI_GPIO     | 0x01u)    /*!< External interrupt line 1 */
+#define EXTI_LINE_2                        (EXTI_GPIO     | 0x02u)    /*!< External interrupt line 2 */
+#define EXTI_LINE_3                        (EXTI_GPIO     | 0x03u)    /*!< External interrupt line 3 */
+#define EXTI_LINE_4                        (EXTI_GPIO     | 0x04u)    /*!< External interrupt line 4 */
+#define EXTI_LINE_5                        (EXTI_GPIO     | 0x05u)    /*!< External interrupt line 5 */
+#define EXTI_LINE_6                        (EXTI_GPIO     | 0x06u)    /*!< External interrupt line 6 */
+#define EXTI_LINE_7                        (EXTI_GPIO     | 0x07u)    /*!< External interrupt line 7 */
+#define EXTI_LINE_8                        (EXTI_GPIO     | 0x08u)    /*!< External interrupt line 8 */
+#define EXTI_LINE_9                        (EXTI_GPIO     | 0x09u)    /*!< External interrupt line 9 */
+#define EXTI_LINE_10                       (EXTI_GPIO     | 0x0Au)    /*!< External interrupt line 10 */
+#define EXTI_LINE_11                       (EXTI_GPIO     | 0x0Bu)    /*!< External interrupt line 11 */
+#define EXTI_LINE_12                       (EXTI_GPIO     | 0x0Cu)    /*!< External interrupt line 12 */
+#define EXTI_LINE_13                       (EXTI_GPIO     | 0x0Du)    /*!< External interrupt line 13 */
+#define EXTI_LINE_14                       (EXTI_GPIO     | 0x0Eu)    /*!< External interrupt line 14 */
+#define EXTI_LINE_15                       (EXTI_GPIO     | 0x0Fu)    /*!< External interrupt line 15 */
+#define EXTI_LINE_16                       (EXTI_CONFIG   | 0x10u)    /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_LINE_17                       (EXTI_CONFIG   | 0x11u)    /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#if defined(EXTI_IMR_IM18)
+#define EXTI_LINE_18                       (EXTI_CONFIG   | 0x12u)    /*!< External interrupt line 18 Connected to the USB Wakeup from suspend event */
+#endif /* EXTI_IMR_IM18 */
+#if defined(EXTI_IMR_IM19)
+#define EXTI_LINE_19                       (EXTI_CONFIG   | 0x13u)    /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+#endif /* EXTI_IMR_IM19 */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Mode  EXTI Mode
+  * @{
+  */
+#define EXTI_MODE_NONE                      0x00000000u
+#define EXTI_MODE_INTERRUPT                 0x00000001u
+#define EXTI_MODE_EVENT                     0x00000002u
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Trigger  EXTI Trigger
+  * @{
+  */
+#define EXTI_TRIGGER_NONE                   0x00000000u
+#define EXTI_TRIGGER_RISING                 0x00000001u
+#define EXTI_TRIGGER_FALLING                0x00000002u
+#define EXTI_TRIGGER_RISING_FALLING         (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_GPIOSel  EXTI GPIOSel
+  * @brief
+  * @{
+  */
+#define EXTI_GPIOA                          0x00000000u
+#define EXTI_GPIOB                          0x00000001u
+#define EXTI_GPIOC                          0x00000002u
+#define EXTI_GPIOD                          0x00000003u
+#if defined (GPIOE)
+#define EXTI_GPIOE                          0x00000004u
+#endif /* GPIOE */
+#if defined (GPIOF)
+#define EXTI_GPIOF                          0x00000005u
+#endif /* GPIOF */
+#if defined (GPIOG)
+#define EXTI_GPIOG                          0x00000006u
+#endif /* GPIOG */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+/**
+  * @brief  EXTI Line property definition
+  */
+#define EXTI_PROPERTY_SHIFT                 24u
+#define EXTI_CONFIG                         (0x02uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_GPIO                           ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
+#define EXTI_PROPERTY_MASK                  (EXTI_CONFIG | EXTI_GPIO)
+
+/**
+  * @brief  EXTI bit usage
+  */
+#define EXTI_PIN_MASK                       0x0000001Fu
+
+/**
+  * @brief  EXTI Mask for interrupt & event mode
+  */
+#define EXTI_MODE_MASK                      (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
+
+/**
+  * @brief  EXTI Mask for trigger possibilities
+  */
+#define EXTI_TRIGGER_MASK                   (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+
+/**
+  * @brief  EXTI Line number
+  */
+#if defined(EXTI_IMR_IM19)
+#define EXTI_LINE_NB                        20UL
+#elif defined(EXTI_IMR_IM18)
+#define EXTI_LINE_NB                        19UL
+#else /* EXTI_IMR_IM17 */
+#define EXTI_LINE_NB                        18UL
+#endif /* EXTI_IMR_IM19 */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Macros EXTI Private Macros
+  * @{
+  */
+#define IS_EXTI_LINE(__EXTI_LINE__)          ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+                                             ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG)   || \
+                                              (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))    && \
+                                              (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
+
+#define IS_EXTI_MODE(__EXTI_LINE__)          ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+                                              (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+
+#define IS_EXTI_TRIGGER(__EXTI_LINE__)       (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
+
+#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__)  ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
+
+#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__)   (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
+
+#if defined (GPIOG)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF) || \
+                                         ((__PORT__) == EXTI_GPIOG))
+#elif defined (GPIOF)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF))
+#elif defined (GPIOE)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE))
+#else
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD))
+#endif /* GPIOG */
+
+#define IS_EXTI_GPIO_PIN(__PIN__)       ((__PIN__) < 16u)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
+  * @brief    EXTI Exported Functions
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
+  * @brief    Configuration functions
+  * @{
+  */
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
+  * @brief    IO operation functions
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void              HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
+uint32_t          HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_EXTI_H */
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h

@@ -0,0 +1,325 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_flash.h
+  * @author  MCD Application Team
+  * @brief   Header file of Flash HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_FLASH_H
+#define __STM32F1xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+   
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+  
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define FLASH_TIMEOUT_VALUE              50000U /* 50 s */
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Private_Macros
+  * @{
+  */
+
+#define IS_FLASH_TYPEPROGRAM(VALUE)  (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_WORD)     || \
+                                      ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))  
+
+#if   defined(FLASH_ACR_LATENCY)
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+                                       ((__LATENCY__) == FLASH_LATENCY_1) || \
+                                       ((__LATENCY__) == FLASH_LATENCY_2))
+
+#else
+#define IS_FLASH_LATENCY(__LATENCY__)   ((__LATENCY__) == FLASH_LATENCY_0)
+#endif /* FLASH_ACR_LATENCY */
+/**
+  * @}
+  */  
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */  
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE              = 0U, 
+  FLASH_PROC_PAGEERASE         = 1U,
+  FLASH_PROC_MASSERASE         = 2U,
+  FLASH_PROC_PROGRAMHALFWORD   = 3U,
+  FLASH_PROC_PROGRAMWORD       = 4U,
+  FLASH_PROC_PROGRAMDOUBLEWORD = 5U
+} FLASH_ProcedureTypeDef;
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+  
+  __IO uint32_t               DataRemaining;    /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+  __IO uint32_t               Address;          /*!< Internal variable to save address selected for program or erase */
+
+  __IO uint64_t               Data;             /*!< Internal variable to save data to be programmed */
+
+  HAL_LockTypeDef             Lock;             /*!< FLASH locking object                */
+
+  __IO uint32_t               ErrorCode;        /*!< FLASH error code                    
+                                                     This parameter can be a value of @ref FLASH_Error_Codes  */
+} FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+
+/** @defgroup FLASH_Error_Codes FLASH Error Codes
+  * @{
+  */
+
+#define HAL_FLASH_ERROR_NONE      0x00U  /*!< No error */
+#define HAL_FLASH_ERROR_PROG      0x01U  /*!< Programming error */
+#define HAL_FLASH_ERROR_WRP       0x02U  /*!< Write protection error */
+#define HAL_FLASH_ERROR_OPTV      0x04U  /*!< Option validity error */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define FLASH_TYPEPROGRAM_HALFWORD             0x01U  /*!<Program a half-word (16-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_WORD                 0x02U  /*!<Program a word (32-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_DOUBLEWORD           0x03U  /*!<Program a double word (64-bit) at a specified address*/
+
+/**
+  * @}
+  */
+
+#if   defined(FLASH_ACR_LATENCY)
+/** @defgroup FLASH_Latency FLASH Latency
+  * @{
+  */
+#define FLASH_LATENCY_0            0x00000000U               /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1            FLASH_ACR_LATENCY_0       /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2            FLASH_ACR_LATENCY_1       /*!< FLASH Two Latency cycles */
+
+/**
+  * @}
+  */
+
+#else
+/** @defgroup FLASH_Latency FLASH Latency
+  * @{
+  */
+#define FLASH_LATENCY_0            0x00000000U    /*!< FLASH Zero Latency cycle */
+
+/**
+  * @}
+  */
+
+#endif /* FLASH_ACR_LATENCY */
+/**
+  * @}
+  */  
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ *  @brief macros to control FLASH features 
+ *  @{
+ */
+ 
+/** @defgroup FLASH_Half_Cycle FLASH Half Cycle
+ *  @brief macros to handle FLASH half cycle
+ * @{
+ */
+
+/**
+  * @brief  Enable the FLASH half cycle access.
+  * @note   half cycle access can only be used with a low-frequency clock of less than
+            8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
+  * @retval None
+  */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE()  (FLASH->ACR |= FLASH_ACR_HLFCYA)
+
+/**
+  * @brief  Disable the FLASH half cycle access.
+  * @note   half cycle access can only be used with a low-frequency clock of less than
+            8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
+  * @retval None
+  */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
+
+/**
+  * @}
+  */
+
+#if defined(FLASH_ACR_LATENCY)
+/** @defgroup FLASH_EM_Latency FLASH Latency
+ *  @brief macros to handle FLASH Latency
+ * @{
+ */ 
+  
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__ FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  * @retval None
+  */ 
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__)    (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  */ 
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+  * @}
+  */
+
+#endif /* FLASH_ACR_LATENCY */
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ *  @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */   
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval None
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()    (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval None
+  */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/* Include FLASH HAL Extended module */
+#include "stm32f1xx_hal_flash_ex.h"  
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler function */
+void       HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */ 
+void       HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void       HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+void HAL_FLASH_OB_Launch(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef       FLASH_WaitForLastOperation(uint32_t Timeout);
+#if defined(FLASH_BANK2_END)
+HAL_StatusTypeDef       FLASH_WaitForLastOperationBank2(uint32_t Timeout);
+#endif /* FLASH_BANK2_END */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_FLASH_H */
+
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h

@@ -0,0 +1,783 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_flash_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of Flash HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_FLASH_EX_H
+#define __STM32F1xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASHEx
+  * @{
+  */ 
+
+/** @addtogroup FLASHEx_Private_Constants
+  * @{
+  */
+
+#define FLASH_SIZE_DATA_REGISTER     0x1FFFF7E0U
+#define OBR_REG_INDEX                1U
+#define SR_FLAG_MASK                 ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP))
+
+/**
+  * @}
+  */  
+
+/** @addtogroup FLASHEx_Private_Macros
+  * @{
+  */
+
+#define IS_FLASH_TYPEERASE(VALUE)   (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_OPTIONBYTE(VALUE)        (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+
+#define IS_WRPSTATE(VALUE)          (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OB_RDP_LEVEL(LEVEL)      (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) 
+
+#define IS_OB_IWDG_SOURCE(SOURCE)   (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE)   (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE)  (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#if defined(FLASH_BANK2_END)
+#define IS_OB_BOOT1(BOOT1)         (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+#endif /* FLASH_BANK2_END */
+
+/* Low Density */
+#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08007FFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08003FFFU))
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+
+/* Medium Density */
+#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFFU))))
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
+
+/* High Density */
+#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU)))
+#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
+
+/* XL Density */
+#if defined(FLASH_BANK2_END)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFFU))
+#endif /* FLASH_BANK2_END */
+
+/* Connectivity Line */
+#if (defined(STM32F105xC) || defined(STM32F107xC))
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU) : \
+                                           (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) ==  0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \
+                                           ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU)))
+#endif /* STM32F105xC || STM32F107xC */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
+
+#if defined(FLASH_BANK2_END)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)  || \
+                             ((BANK) == FLASH_BANK_2)  || \
+                             ((BANK) == FLASH_BANK_BOTH))
+#else
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
+#endif /* FLASH_BANK2_END */
+
+/* Low Density */
+#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS)  (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
+                                            ((ADDRESS) <= FLASH_BANK1_END) :  ((ADDRESS) <= 0x08003FFFU)))
+
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+
+/* Medium Density */
+#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
+                                           ((ADDRESS) <= FLASH_BANK1_END) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \
+                                           ((ADDRESS) <= 0x0800FFFF) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
+                                           ((ADDRESS) <= 0x08007FFF) :  ((ADDRESS) <= 0x08003FFFU)))))
+
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
+
+/* High Density */
+#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? \
+                                           ((ADDRESS) <= FLASH_BANK1_END) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? \
+                                           ((ADDRESS) <= 0x0805FFFFU) :  ((ADDRESS) <= 0x0803FFFFU))))
+
+#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
+
+/* XL Density */
+#if defined(FLASH_BANK2_END)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? \
+                                           ((ADDRESS) <= FLASH_BANK2_END) :  ((ADDRESS) <= 0x080BFFFFU)))
+
+#endif /* FLASH_BANK2_END */
+
+/* Connectivity Line */
+#if (defined(STM32F105xC) || defined(STM32F107xC))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \
+                                           ((ADDRESS) <= FLASH_BANK1_END) :  (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
+                                           ((ADDRESS) <= 0x0801FFFFU) :  ((ADDRESS) <= 0x0800FFFFU))))
+
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+  * @}
+  */  
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
+  * @{
+  */  
+
+/**
+  * @brief  FLASH Erase structure definition
+  */
+typedef struct
+{
+  uint32_t TypeErase;   /*!< TypeErase: Mass erase or page erase.
+                             This parameter can be a value of @ref FLASHEx_Type_Erase */
+  
+  uint32_t Banks;       /*!< Select banks to erase when Mass erase is enabled.
+                             This parameter must be a value of @ref FLASHEx_Banks */    
+  
+  uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+                             This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END 
+                             (x = 1 or 2 depending on devices)*/
+  
+  uint32_t NbPages;     /*!< NbPages: Number of pagess to be erased.
+                             This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
+                                                          
+} FLASH_EraseInitTypeDef;
+
+/**
+  * @brief  FLASH Options bytes program structure definition
+  */
+typedef struct
+{
+  uint32_t OptionType;  /*!< OptionType: Option byte to be configured.
+                             This parameter can be a value of @ref FLASHEx_OB_Type */
+
+  uint32_t WRPState;    /*!< WRPState: Write protection activation or deactivation.
+                             This parameter can be a value of @ref FLASHEx_OB_WRP_State */
+
+  uint32_t WRPPage;     /*!< WRPPage: specifies the page(s) to be write protected
+                             This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+  uint32_t Banks;        /*!< Select banks for WRP activation/deactivation of all sectors.
+                              This parameter must be a value of @ref FLASHEx_Banks */ 
+    
+  uint8_t RDPLevel;     /*!< RDPLevel: Set the read protection level..
+                             This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
+
+#if defined(FLASH_BANK2_END)
+  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
+                             IWDG / STOP / STDBY / BOOT1
+                             This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, 
+                             @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */
+#else
+  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
+                             IWDG / STOP / STDBY
+                             This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, 
+                             @ref FLASHEx_OB_nRST_STDBY */
+#endif /* FLASH_BANK2_END */
+
+  uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
+                             This parameter can be a value of @ref FLASHEx_OB_Data_Address */
+  
+  uint8_t DATAData;     /*!< DATAData: Data to be stored in the option byte DATA
+                             This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+} FLASH_OBProgramInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+  * @{
+  */  
+
+/** @defgroup FLASHEx_Constants FLASH Constants
+  * @{
+  */ 
+
+/** @defgroup FLASHEx_Page_Size Page Size
+  * @{
+  */ 
+#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
+#define FLASH_PAGE_SIZE          0x400U
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+       /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+
+#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC))
+#define FLASH_PAGE_SIZE          0x800U
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+       /* STM32F101xG || STM32F103xG */ 
+       /* STM32F105xC || STM32F107xC */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Type_Erase Type Erase
+  * @{
+  */ 
+#define FLASH_TYPEERASE_PAGES     0x00U  /*!<Pages erase only*/
+#define FLASH_TYPEERASE_MASSERASE 0x02U  /*!<Flash mass erase activation*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Banks Banks
+  * @{
+  */
+#if defined(FLASH_BANK2_END)
+#define FLASH_BANK_1     1U /*!< Bank 1   */
+#define FLASH_BANK_2     2U /*!< Bank 2   */
+#define FLASH_BANK_BOTH  ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2  */
+
+#else
+#define FLASH_BANK_1     1U /*!< Bank 1   */
+#endif
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OptionByte_Constants Option Byte Constants
+  * @{
+  */ 
+
+/** @defgroup FLASHEx_OB_Type Option Bytes Type
+  * @{
+  */
+#define OPTIONBYTE_WRP            0x01U  /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP            0x02U  /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER           0x04U  /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA           0x08U  /*!<DATA option byte configuration*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_WRP_State Option Byte WRP State
+  * @{
+  */ 
+#define OB_WRPSTATE_DISABLE       0x00U  /*!<Disable the write protection of the desired pages*/
+#define OB_WRPSTATE_ENABLE        0x01U  /*!<Enable the write protection of the desired pagess*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_Write_Protection Option Bytes Write Protection
+  * @{
+  */
+/* STM32 Low and Medium density devices */
+#if  defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) \
+  || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) \
+  || defined(STM32F103xB)
+#define OB_WRP_PAGES0TO3               0x00000001U /*!< Write protection of page 0 to 3 */
+#define OB_WRP_PAGES4TO7               0x00000002U /*!< Write protection of page 4 to 7 */
+#define OB_WRP_PAGES8TO11              0x00000004U /*!< Write protection of page 8 to 11 */
+#define OB_WRP_PAGES12TO15             0x00000008U /*!< Write protection of page 12 to 15 */
+#define OB_WRP_PAGES16TO19             0x00000010U /*!< Write protection of page 16 to 19 */
+#define OB_WRP_PAGES20TO23             0x00000020U /*!< Write protection of page 20 to 23 */
+#define OB_WRP_PAGES24TO27             0x00000040U /*!< Write protection of page 24 to 27 */
+#define OB_WRP_PAGES28TO31             0x00000080U /*!< Write protection of page 28 to 31 */
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+       /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+       
+/* STM32 Medium-density devices */
+#if  defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
+#define OB_WRP_PAGES32TO35             0x00000100U   /*!< Write protection of page 32 to 35 */
+#define OB_WRP_PAGES36TO39             0x00000200U   /*!< Write protection of page 36 to 39 */
+#define OB_WRP_PAGES40TO43             0x00000400U   /*!< Write protection of page 40 to 43 */
+#define OB_WRP_PAGES44TO47             0x00000800U   /*!< Write protection of page 44 to 47 */
+#define OB_WRP_PAGES48TO51             0x00001000U   /*!< Write protection of page 48 to 51 */
+#define OB_WRP_PAGES52TO55             0x00002000U   /*!< Write protection of page 52 to 55 */
+#define OB_WRP_PAGES56TO59             0x00004000U   /*!< Write protection of page 56 to 59 */
+#define OB_WRP_PAGES60TO63             0x00008000U   /*!< Write protection of page 60 to 63 */
+#define OB_WRP_PAGES64TO67             0x00010000U   /*!< Write protection of page 64 to 67 */
+#define OB_WRP_PAGES68TO71             0x00020000U   /*!< Write protection of page 68 to 71 */
+#define OB_WRP_PAGES72TO75             0x00040000U   /*!< Write protection of page 72 to 75 */
+#define OB_WRP_PAGES76TO79             0x00080000U   /*!< Write protection of page 76 to 79 */
+#define OB_WRP_PAGES80TO83             0x00100000U   /*!< Write protection of page 80 to 83 */
+#define OB_WRP_PAGES84TO87             0x00200000U   /*!< Write protection of page 84 to 87 */
+#define OB_WRP_PAGES88TO91             0x00400000U   /*!< Write protection of page 88 to 91 */
+#define OB_WRP_PAGES92TO95             0x00800000U   /*!< Write protection of page 92 to 95 */
+#define OB_WRP_PAGES96TO99             0x01000000U   /*!< Write protection of page 96 to 99 */
+#define OB_WRP_PAGES100TO103           0x02000000U   /*!< Write protection of page 100 to 103 */
+#define OB_WRP_PAGES104TO107           0x04000000U   /*!< Write protection of page 104 to 107 */
+#define OB_WRP_PAGES108TO111           0x08000000U   /*!< Write protection of page 108 to 111 */
+#define OB_WRP_PAGES112TO115           0x10000000U   /*!< Write protection of page 112 to 115 */
+#define OB_WRP_PAGES116TO119           0x20000000U   /*!< Write protection of page 115 to 119 */
+#define OB_WRP_PAGES120TO123           0x40000000U   /*!< Write protection of page 120 to 123 */
+#define OB_WRP_PAGES124TO127           0x80000000U    /*!< Write protection of page 124 to 127 */
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+
+
+/* STM32 High-density, XL-density and Connectivity line devices */
+#if  defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) \
+  || defined(STM32F101xG) || defined(STM32F103xG) \
+  || defined(STM32F105xC) || defined(STM32F107xC)
+#define OB_WRP_PAGES0TO1               0x00000001U  /*!< Write protection of page 0 TO 1 */
+#define OB_WRP_PAGES2TO3               0x00000002U  /*!< Write protection of page 2 TO 3 */
+#define OB_WRP_PAGES4TO5               0x00000004U  /*!< Write protection of page 4 TO 5 */
+#define OB_WRP_PAGES6TO7               0x00000008U  /*!< Write protection of page 6 TO 7 */
+#define OB_WRP_PAGES8TO9               0x00000010U  /*!< Write protection of page 8 TO 9 */
+#define OB_WRP_PAGES10TO11             0x00000020U  /*!< Write protection of page 10 TO 11 */
+#define OB_WRP_PAGES12TO13             0x00000040U  /*!< Write protection of page 12 TO 13 */
+#define OB_WRP_PAGES14TO15             0x00000080U  /*!< Write protection of page 14 TO 15 */
+#define OB_WRP_PAGES16TO17             0x00000100U  /*!< Write protection of page 16 TO 17 */
+#define OB_WRP_PAGES18TO19             0x00000200U  /*!< Write protection of page 18 TO 19 */
+#define OB_WRP_PAGES20TO21             0x00000400U  /*!< Write protection of page 20 TO 21 */
+#define OB_WRP_PAGES22TO23             0x00000800U  /*!< Write protection of page 22 TO 23 */
+#define OB_WRP_PAGES24TO25             0x00001000U  /*!< Write protection of page 24 TO 25 */
+#define OB_WRP_PAGES26TO27             0x00002000U  /*!< Write protection of page 26 TO 27 */
+#define OB_WRP_PAGES28TO29             0x00004000U  /*!< Write protection of page 28 TO 29 */
+#define OB_WRP_PAGES30TO31             0x00008000U  /*!< Write protection of page 30 TO 31 */
+#define OB_WRP_PAGES32TO33             0x00010000U  /*!< Write protection of page 32 TO 33 */
+#define OB_WRP_PAGES34TO35             0x00020000U  /*!< Write protection of page 34 TO 35 */
+#define OB_WRP_PAGES36TO37             0x00040000U  /*!< Write protection of page 36 TO 37 */
+#define OB_WRP_PAGES38TO39             0x00080000U  /*!< Write protection of page 38 TO 39 */
+#define OB_WRP_PAGES40TO41             0x00100000U  /*!< Write protection of page 40 TO 41 */
+#define OB_WRP_PAGES42TO43             0x00200000U  /*!< Write protection of page 42 TO 43 */
+#define OB_WRP_PAGES44TO45             0x00400000U  /*!< Write protection of page 44 TO 45 */
+#define OB_WRP_PAGES46TO47             0x00800000U  /*!< Write protection of page 46 TO 47 */
+#define OB_WRP_PAGES48TO49             0x01000000U  /*!< Write protection of page 48 TO 49 */
+#define OB_WRP_PAGES50TO51             0x02000000U  /*!< Write protection of page 50 TO 51 */
+#define OB_WRP_PAGES52TO53             0x04000000U  /*!< Write protection of page 52 TO 53 */
+#define OB_WRP_PAGES54TO55             0x08000000U  /*!< Write protection of page 54 TO 55 */
+#define OB_WRP_PAGES56TO57             0x10000000U  /*!< Write protection of page 56 TO 57 */
+#define OB_WRP_PAGES58TO59             0x20000000U  /*!< Write protection of page 58 TO 59 */
+#define OB_WRP_PAGES60TO61             0x40000000U  /*!< Write protection of page 60 TO 61 */
+#define OB_WRP_PAGES62TO127            0x80000000U   /*!< Write protection of page 62 TO 127 */
+#define OB_WRP_PAGES62TO255            0x80000000U   /*!< Write protection of page 62 TO 255 */
+#define OB_WRP_PAGES62TO511            0x80000000U   /*!< Write protection of page 62 TO 511 */
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
+       /* STM32F101xG || STM32F103xG */ 
+       /* STM32F105xC || STM32F107xC */
+
+#define OB_WRP_ALLPAGES                0xFFFFFFFFU  /*!< Write protection of all Pages */
+ 
+/* Low Density */
+#if  defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)
+#define OB_WRP_PAGES0TO31MASK          0x000000FFU 
+#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
+
+/* Medium Density */
+#if  defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
+#define OB_WRP_PAGES0TO31MASK          0x000000FFU
+#define OB_WRP_PAGES32TO63MASK         0x0000FF00U
+#define OB_WRP_PAGES64TO95MASK         0x00FF0000U
+#define OB_WRP_PAGES96TO127MASK        0xFF000000U
+#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
+       
+/* High Density */
+#if  defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)  
+#define OB_WRP_PAGES0TO15MASK          0x000000FFU
+#define OB_WRP_PAGES16TO31MASK         0x0000FF00U
+#define OB_WRP_PAGES32TO47MASK         0x00FF0000U
+#define OB_WRP_PAGES48TO255MASK        0xFF000000U
+#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
+
+/* XL Density */
+#if  defined(STM32F101xG) || defined(STM32F103xG) 
+#define OB_WRP_PAGES0TO15MASK          0x000000FFU
+#define OB_WRP_PAGES16TO31MASK         0x0000FF00U
+#define OB_WRP_PAGES32TO47MASK         0x00FF0000U
+#define OB_WRP_PAGES48TO511MASK        0xFF000000U
+#endif /* STM32F101xG || STM32F103xG */
+      
+/* Connectivity line devices */
+#if defined(STM32F105xC) || defined(STM32F107xC)
+#define OB_WRP_PAGES0TO15MASK          0x000000FFU
+#define OB_WRP_PAGES16TO31MASK         0x0000FF00U
+#define OB_WRP_PAGES32TO47MASK         0x00FF0000U
+#define OB_WRP_PAGES48TO127MASK        0xFF000000U
+#endif /* STM32F105xC || STM32F107xC */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_Read_Protection Option Byte Read Protection
+  * @{
+  */
+#define OB_RDP_LEVEL_0            ((uint8_t)0xA5)
+#define OB_RDP_LEVEL_1            ((uint8_t)0x00)
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx_OB_IWatchdog Option Byte IWatchdog
+  * @{
+  */ 
+#define OB_IWDG_SW                ((uint16_t)0x0001)  /*!< Software IWDG selected */
+#define OB_IWDG_HW                ((uint16_t)0x0000)  /*!< Hardware IWDG selected */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_OB_nRST_STOP Option Byte nRST STOP
+  * @{
+  */ 
+#define OB_STOP_NO_RST            ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST               ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASHEx_OB_nRST_STDBY Option Byte nRST STDBY
+  * @{
+  */ 
+#define OB_STDBY_NO_RST           ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST              ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
+/**
+  * @}
+  */
+
+#if defined(FLASH_BANK2_END)
+/** @defgroup FLASHEx_OB_BOOT1 Option Byte BOOT1
+  * @{
+  */
+#define OB_BOOT1_RESET            ((uint16_t)0x0000) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET              ((uint16_t)0x0008) /*!< BOOT1 Set */
+/**
+  * @}
+  */
+#endif /* FLASH_BANK2_END */
+
+/** @defgroup FLASHEx_OB_Data_Address  Option Byte Data Address
+  * @{
+  */
+#define OB_DATA_ADDRESS_DATA0     0x1FFFF804U
+#define OB_DATA_ADDRESS_DATA1     0x1FFFF806U
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASHEx_Constants
+  * @{
+  */ 
+
+/** @defgroup FLASH_Flag_definition Flag definition
+  * @brief Flag definition
+  * @{
+  */
+#if defined(FLASH_BANK2_END)
+ #define FLASH_FLAG_BSY             FLASH_FLAG_BSY_BANK1       /*!< FLASH Bank1 Busy flag                   */ 
+ #define FLASH_FLAG_PGERR           FLASH_FLAG_PGERR_BANK1     /*!< FLASH Bank1 Programming error flag      */
+ #define FLASH_FLAG_WRPERR          FLASH_FLAG_WRPERR_BANK1    /*!< FLASH Bank1 Write protected error flag  */
+ #define FLASH_FLAG_EOP             FLASH_FLAG_EOP_BANK1       /*!< FLASH Bank1 End of Operation flag       */
+
+ #define FLASH_FLAG_BSY_BANK1       FLASH_SR_BSY               /*!< FLASH Bank1 Busy flag                   */ 
+ #define FLASH_FLAG_PGERR_BANK1     FLASH_SR_PGERR             /*!< FLASH Bank1 Programming error flag      */
+ #define FLASH_FLAG_WRPERR_BANK1    FLASH_SR_WRPRTERR          /*!< FLASH Bank1 Write protected error flag  */
+ #define FLASH_FLAG_EOP_BANK1       FLASH_SR_EOP               /*!< FLASH Bank1 End of Operation flag       */
+       
+ #define FLASH_FLAG_BSY_BANK2       (FLASH_SR2_BSY << 16U)      /*!< FLASH Bank2 Busy flag                   */ 
+ #define FLASH_FLAG_PGERR_BANK2     (FLASH_SR2_PGERR << 16U)    /*!< FLASH Bank2 Programming error flag      */
+ #define FLASH_FLAG_WRPERR_BANK2    (FLASH_SR2_WRPRTERR << 16U) /*!< FLASH Bank2 Write protected error flag  */
+ #define FLASH_FLAG_EOP_BANK2       (FLASH_SR2_EOP << 16U)      /*!< FLASH Bank2 End of Operation flag       */
+
+#else  
+
+ #define FLASH_FLAG_BSY             FLASH_SR_BSY              /*!< FLASH Busy flag                          */ 
+ #define FLASH_FLAG_PGERR           FLASH_SR_PGERR            /*!< FLASH Programming error flag             */
+ #define FLASH_FLAG_WRPERR          FLASH_SR_WRPRTERR         /*!< FLASH Write protected error flag         */
+ #define FLASH_FLAG_EOP             FLASH_SR_EOP              /*!< FLASH End of Operation flag              */
+
+#endif
+ #define FLASH_FLAG_OPTVERR         ((OBR_REG_INDEX << 8U | FLASH_OBR_OPTERR)) /*!< Option Byte Error        */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Interrupt_definition Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */
+#if defined(FLASH_BANK2_END)
+ #define FLASH_IT_EOP               FLASH_IT_EOP_BANK1        /*!< End of FLASH Operation Interrupt source Bank1 */
+ #define FLASH_IT_ERR               FLASH_IT_ERR_BANK1        /*!< Error Interrupt source Bank1                  */
+
+ #define FLASH_IT_EOP_BANK1         FLASH_CR_EOPIE            /*!< End of FLASH Operation Interrupt source Bank1 */
+ #define FLASH_IT_ERR_BANK1         FLASH_CR_ERRIE            /*!< Error Interrupt source Bank1                  */
+
+ #define FLASH_IT_EOP_BANK2         (FLASH_CR2_EOPIE << 16U)   /*!< End of FLASH Operation Interrupt source Bank2 */
+ #define FLASH_IT_ERR_BANK2         (FLASH_CR2_ERRIE << 16U)   /*!< Error Interrupt source Bank2                  */
+
+#else
+
+ #define FLASH_IT_EOP               FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
+ #define FLASH_IT_ERR               FLASH_CR_ERRIE          /*!< Error Interrupt source                  */
+
+#endif
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */
+  
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros
+  * @{
+  */
+
+/** @defgroup FLASH_Interrupt Interrupt
+ *  @brief macros to handle FLASH interrupts
+ * @{
+ */ 
+
+#if defined(FLASH_BANK2_END)
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *     This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
+  *     @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
+  *     @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
+  *     @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
+  * @retval none
+  */ 
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  do { \
+                          /* Enable Bank1 IT */ \
+                          SET_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \
+                          /* Enable Bank2 IT */ \
+                          SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \
+                    } while(0U)
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *     This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
+  *     @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
+  *     @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
+  *     @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
+  * @retval none
+  */ 
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  do { \
+                          /* Disable Bank1 IT */ \
+                          CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \
+                          /* Disable Bank2 IT */ \
+                          CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \
+                    } while(0U)
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__ specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref FLASH_FLAG_EOP_BANK1    FLASH End of Operation flag on bank1
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
+  *            @arg @ref FLASH_FLAG_PGERR_BANK1  FLASH Programming error flag on bank1
+  *            @arg @ref FLASH_FLAG_BSY_BANK1    FLASH Busy flag on bank1
+  *            @arg @ref FLASH_FLAG_EOP_BANK2    FLASH End of Operation flag on bank2
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
+  *            @arg @ref FLASH_FLAG_PGERR_BANK2  FLASH Programming error flag on bank2
+  *            @arg @ref FLASH_FLAG_BSY_BANK2    FLASH Busy flag on bank2
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
+                                            (FLASH->OBR & FLASH_OBR_OPTERR) : \
+                                        ((((__FLAG__) & SR_FLAG_MASK) != RESET)? \
+                                            (FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \
+                                            (FLASH->SR2 & ((__FLAG__) >> 16U))))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__ specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref FLASH_FLAG_EOP_BANK1    FLASH End of Operation flag on bank1
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
+  *            @arg @ref FLASH_FLAG_PGERR_BANK1  FLASH Programming error flag on bank1
+  *            @arg @ref FLASH_FLAG_BSY_BANK1    FLASH Busy flag on bank1
+  *            @arg @ref FLASH_FLAG_EOP_BANK2    FLASH End of Operation flag on bank2
+  *            @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
+  *            @arg @ref FLASH_FLAG_PGERR_BANK2  FLASH Programming error flag on bank2
+  *            @arg @ref FLASH_FLAG_BSY_BANK2    FLASH Busy flag on bank2
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)  do { \
+                          /* Clear FLASH_FLAG_OPTVERR flag */ \
+                          if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
+                          { \
+                            CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
+                          } \
+                          else { \
+                          /* Clear Flag in Bank1 */ \
+                          if (((__FLAG__) & SR_FLAG_MASK) != RESET) \
+                          { \
+                            FLASH->SR  = ((__FLAG__) & SR_FLAG_MASK); \
+                          } \
+                          /* Clear Flag in Bank2 */ \
+                          if (((__FLAG__) >> 16U) != RESET) \
+                          { \
+                            FLASH->SR2 = ((__FLAG__) >> 16U); \
+                          } \
+                          } \
+                    } while(0U)
+#else
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+  *     @arg @ref FLASH_IT_ERR Error Interrupt    
+  * @retval none
+  */ 
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+  *     @arg @ref FLASH_IT_ERR Error Interrupt    
+  * @retval none
+  */ 
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)   (FLASH->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__ specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref FLASH_FLAG_EOP    FLASH End of Operation flag 
+  *            @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag 
+  *            @arg @ref FLASH_FLAG_PGERR  FLASH Programming error flag
+  *            @arg @ref FLASH_FLAG_BSY    FLASH Busy flag
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)  (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
+                                            (FLASH->OBR & FLASH_OBR_OPTERR) : \
+                                            (FLASH->SR & (__FLAG__)))
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__ specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref FLASH_FLAG_EOP    FLASH End of Operation flag 
+  *            @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag 
+  *            @arg @ref FLASH_FLAG_PGERR  FLASH Programming error flag 
+  *            @arg @ref FLASH_FLAG_OPTVERR  Loaded OB and its complement do not match
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   do { \
+                          /* Clear FLASH_FLAG_OPTVERR flag */ \
+                          if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
+                          { \
+                            CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
+                          } \
+                          else { \
+                            /* Clear Flag in Bank1 */ \
+                            FLASH->SR  = (__FLAG__); \
+                          } \
+                    } while(0U)
+
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef  HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
+HAL_StatusTypeDef  HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef  HAL_FLASHEx_OBErase(void);
+HAL_StatusTypeDef  HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void               HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+uint32_t           HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_FLASH_EX_H */
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h

@@ -0,0 +1,306 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_GPIO_H
+#define STM32F1xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+
+/**
+  * @brief GPIO Init structure definition
+  */
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
+} GPIO_InitTypeDef;
+
+/**
+  * @brief  GPIO Bit SET and Bit RESET enumeration
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0u,
+  GPIO_PIN_SET
+} GPIO_PinState;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFF)  /* All pins selected */
+
+#define GPIO_PIN_MASK              0x0000FFFFu /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+  * @brief GPIO Configuration Mode
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */
+#define  GPIO_MODE_INPUT                        0x00000000u   /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    0x00000001u   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    0x00000011u   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        0x00000002u   /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        0x00000012u   /*!< Alternate Function Open Drain Mode    */
+#define  GPIO_MODE_AF_INPUT                     GPIO_MODE_INPUT          /*!< Alternate Function Input Mode         */
+
+#define  GPIO_MODE_ANALOG                       0x00000003u   /*!< Analog Mode  */
+
+#define  GPIO_MODE_IT_RISING                    0x10110000u   /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   0x10210000u   /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            0x10310000u   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+
+#define  GPIO_MODE_EVT_RISING                   0x10120000u   /*!< External Event Mode with Rising edge trigger detection               */
+#define  GPIO_MODE_EVT_FALLING                  0x10220000u   /*!< External Event Mode with Falling edge trigger detection              */
+#define  GPIO_MODE_EVT_RISING_FALLING           0x10320000u   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_speed_define  GPIO speed define
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */
+#define  GPIO_SPEED_FREQ_LOW              (GPIO_CRL_MODE0_1) /*!< Low speed */
+#define  GPIO_SPEED_FREQ_MEDIUM           (GPIO_CRL_MODE0_0) /*!< Medium speed */
+#define  GPIO_SPEED_FREQ_HIGH             (GPIO_CRL_MODE0)   /*!< High speed */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_pull_define GPIO pull define
+  * @brief GPIO Pull-Up or Pull-Down Activation
+  * @{
+  */
+#define  GPIO_NOPULL        0x00000000u   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        0x00000001u   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      0x00000002u   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__: specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f1xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN)           (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00u) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00u))
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
+                            ((MODE) == GPIO_MODE_AF_PP)              ||\
+                            ((MODE) == GPIO_MODE_AF_OD)              ||\
+                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
+                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
+                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
+                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                            ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || \
+                              ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || ((SPEED) == GPIO_SPEED_FREQ_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+                            ((PULL) == GPIO_PULLDOWN))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_GPIO_H */
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

@@ -0,0 +1,892 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_gpio_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_GPIO_EX_H
+#define STM32F1xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIOEx GPIOEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration
+  * @brief This section propose definition to use the Cortex EVENTOUT signal.
+  * @{
+  */
+
+/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin
+  * @{
+  */
+
+#define AFIO_EVENTOUT_PIN_0  AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */
+#define AFIO_EVENTOUT_PIN_1  AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */
+#define AFIO_EVENTOUT_PIN_2  AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */
+#define AFIO_EVENTOUT_PIN_3  AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */
+#define AFIO_EVENTOUT_PIN_4  AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */
+#define AFIO_EVENTOUT_PIN_5  AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */
+#define AFIO_EVENTOUT_PIN_6  AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */
+#define AFIO_EVENTOUT_PIN_7  AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */
+#define AFIO_EVENTOUT_PIN_8  AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */
+#define AFIO_EVENTOUT_PIN_9  AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */
+#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */
+#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */
+#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */
+#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */
+#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */
+#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */
+
+#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \
+                                       ((__PIN__) == AFIO_EVENTOUT_PIN_15))
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port
+  * @{
+  */
+
+#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */
+#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */
+#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */
+#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */
+#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */
+
+#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \
+                                         ((__PORT__) == AFIO_EVENTOUT_PORT_E))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping
+  * @brief This section propose definition to remap the alternate function to some other port/pins.
+  * @{
+  */
+
+/**
+  * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
+  * @note  ENABLE: Remap     (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP)
+
+/**
+  * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
+  * @note  DISABLE: No remap (NSS/PA4,  SCK/PA5, MISO/PA6, MOSI/PA7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI1_DISABLE()  AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP)
+
+/**
+  * @brief Enable the remapping of I2C1 alternate function SCL and SDA.
+  * @note  ENABLE: Remap     (SCL/PB8, SDA/PB9)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_I2C1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP)
+
+/**
+  * @brief Disable the remapping of I2C1 alternate function SCL and SDA.
+  * @note  DISABLE: No remap (SCL/PB6, SDA/PB7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_I2C1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP)
+
+/**
+  * @brief Enable the remapping of USART1 alternate function TX and RX.
+  * @note  ENABLE: Remap     (TX/PB6, RX/PB7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP)
+
+/**
+  * @brief Disable the remapping of USART1 alternate function TX and RX.
+  * @note  DISABLE: No remap (TX/PA9, RX/PA10)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP)
+
+/**
+  * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
+  * @note  ENABLE: Remap     (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART2_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP)
+
+/**
+  * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
+  * @note  DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP)
+
+/**
+  * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
+  * @note  ENABLE: Full remap     (TX/PD8,  RX/PD9,  CK/PD10, CTS/PD11, RTS/PD12)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART3_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
+  * @note  PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART3_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
+  * @note  DISABLE: No remap      (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_USART3_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
+  * @note  ENABLE: Full remap     (ETR/PE7,  CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8,  CH2N/PE10, CH3N/PE12)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
+  * @note  PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9,  CH3/PA10, CH4/PA11, BKIN/PA6,  CH1N/PA7,  CH2N/PB0,  CH3N/PB1)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
+  * @note  DISABLE: No remap      (ETR/PA12, CH1/PA8, CH2/PA9,  CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  ENABLE: Full remap       (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  PARTIAL_2: Partial remap (CH1/ETR/PA0,  CH2/PA1, CH3/PB10, CH4/PB11)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2,  CH4/PA3)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
+  * @note  DISABLE: No remap        (CH1/ETR/PA0,  CH2/PA1, CH3/PA2,  CH4/PA3)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM2_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
+  * @note  ENABLE: Full remap     (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9)
+  * @note  TIM3_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM3_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
+  * @note  PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1)
+  * @note  TIM3_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM3_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
+
+/**
+  * @brief Disable the remapping of TIM3 alternate function channels 1 to 4
+  * @note  DISABLE: No remap      (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1)
+  * @note  TIM3_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM3_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
+
+/**
+  * @brief Enable the remapping of TIM4 alternate function channels 1 to 4.
+  * @note  ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15)
+  * @note  TIM4_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM4_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM4 alternate function channels 1 to 4.
+  * @note  DISABLE: No remap  (TIM4_CH1/PB6,  TIM4_CH2/PB7,  TIM4_CH3/PB8,  TIM4_CH4/PB9)
+  * @note  TIM4_ETR on PE0 is not re-mapped.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP)
+
+#if defined(AFIO_MAPR_CAN_REMAP_REMAP1)
+
+/**
+  * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
+  * @note  CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN1_1()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP1, AFIO_MAPR_CAN_REMAP)
+
+/**
+  * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
+  * @note  CASE 2: CAN_RX mapped to PB8,  CAN_TX mapped to PB9 (not available on 36-pin package)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN1_2()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP2, AFIO_MAPR_CAN_REMAP)
+
+/**
+  * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
+  * @note  CASE 3: CAN_RX mapped to PD0,  CAN_TX mapped to PD1
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN1_3()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP3, AFIO_MAPR_CAN_REMAP)
+
+#endif
+
+/**
+  * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used
+  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
+  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
+  *        on 100-pin and 144-pin packages, no need for remapping).
+  * @note  ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_PD01_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP)
+
+/**
+  * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used
+  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
+  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
+  *        on 100-pin and 144-pin packages, no need for remapping).
+  * @note  DISABLE: No remapping of PD0 and PD1
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_PD01_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP)
+
+#if defined(AFIO_MAPR_TIM5CH4_IREMAP)
+/**
+  * @brief Enable the remapping of TIM5CH4.
+  * @note  ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose.
+  * @note  This function is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_TIM5CH4_IREMAP)
+
+/**
+  * @brief Disable the remapping of TIM5CH4.
+  * @note  DISABLE: TIM5_CH4 is connected to PA3
+  * @note  This function is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM5CH4_IREMAP)
+#endif
+
+#if defined(AFIO_MAPR_ETH_REMAP)
+/**
+  * @brief Enable the remapping of Ethernet MAC connections with the PHY.
+  * @note  ENABLE: Remap     (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ETH_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ETH_REMAP)
+
+/**
+  * @brief Disable the remapping of Ethernet MAC connections with the PHY.
+  * @note  DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5,  RXD2/PB0,  RXD3/PB1)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ETH_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ETH_REMAP)
+#endif
+
+#if defined(AFIO_MAPR_CAN2_REMAP)
+
+/**
+  * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
+  * @note  ENABLE: Remap     (CAN2_RX/PB5,  CAN2_TX/PB6)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN2_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_CAN2_REMAP)
+
+/**
+  * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
+  * @note  DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CAN2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_CAN2_REMAP)
+#endif
+
+#if defined(AFIO_MAPR_MII_RMII_SEL)
+/**
+  * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
+  * @note  ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_RMII() AFIO_REMAP_ENABLE(AFIO_MAPR_MII_RMII_SEL)
+
+/**
+  * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
+  * @note  ETH_MII: Configure Ethernet MAC for connection with an MII PHY
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_MII()  AFIO_REMAP_DISABLE(AFIO_MAPR_MII_RMII_SEL)
+#endif
+
+/**
+  * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
+  * @note  ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
+  * @note  DISABLE: ADC1 External trigger injected conversion is connected to EXTI15
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
+  * @note  ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
+  * @note  DISABLE: ADC1 External trigger regular conversion is connected to EXTI11
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
+
+#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
+  * @note  ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
+  * @note  DISABLE: ADC2 External trigger injected conversion is connected to EXTI15
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+#endif
+
+#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  DISABLE: ADC2 External trigger regular conversion is connected to EXTI11
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
+#endif
+
+/**
+  * @brief Enable the Serial wire JTAG configuration
+  * @note  ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SWJ_ENABLE()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET)
+
+/**
+  * @brief Enable the Serial wire JTAG configuration
+  * @note  NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SWJ_NONJTRST()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST)
+
+/**
+  * @brief Enable the Serial wire JTAG configuration
+  * @note  NOJTAG: JTAG-DP Disabled and SW-DP Enabled
+  * @retval None
+  */
+
+#define __HAL_AFIO_REMAP_SWJ_NOJTAG()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE)
+
+/**
+  * @brief Disable the Serial wire JTAG configuration
+  * @note  DISABLE: JTAG-DP Disabled and SW-DP Disabled
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SWJ_DISABLE()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE)
+
+#if defined(AFIO_MAPR_SPI3_REMAP)
+
+/**
+  * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
+  * @note  ENABLE: Remap     (SPI3_NSS-I2S3_WS/PA4,  SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12)
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI3_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_SPI3_REMAP)
+
+/**
+  * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
+  * @note  DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3,  SPI3_MISO/PB4,  SPI3_MOSI-I2S3_SD/PB5).
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_SPI3_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI3_REMAP)
+#endif
+
+#if defined(AFIO_MAPR_TIM2ITR1_IREMAP)
+
+/**
+  * @brief Control of TIM2_ITR1 internal mapping.
+  * @note  TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_TIM2ITR1_TO_USB() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
+
+/**
+  * @brief Control of TIM2_ITR1 internal mapping.
+  * @note  TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_TIM2ITR1_TO_ETH() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
+#endif
+
+#if defined(AFIO_MAPR_PTP_PPS_REMAP)
+
+/**
+  * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  ENABLE: PTP_PPS is output on PB5 pin.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_PTP_PPS_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_PTP_PPS_REMAP)
+
+/**
+  * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
+  * @note  DISABLE: PTP_PPS not output on PB5 pin.
+  * @note  This bit is available only in connectivity line devices and is reserved otherwise.
+  * @retval None
+  */
+#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PTP_PPS_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM9_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2.
+  * @note  ENABLE: Remap     (TIM9_CH1 on PE5 and TIM9_CH2 on PE6).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM9_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2.
+  * @note  DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM10_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM10_CH1.
+  * @note  ENABLE: Remap     (TIM10_CH1 on PF6).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM10_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM10_CH1.
+  * @note  DISABLE: No remap (TIM10_CH1 on PB8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM11_REMAP)
+/**
+  * @brief Enable the remapping of TIM11_CH1.
+  * @note  ENABLE: Remap     (TIM11_CH1 on PF7).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM11_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM11_CH1.
+  * @note  DISABLE: No remap (TIM11_CH1 on PB9).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM13_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM13_CH1.
+  * @note  ENABLE: Remap     STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM13_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM13_CH1.
+  * @note  DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM14_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM14_CH1.
+  * @note  ENABLE: Remap     STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM14_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM14_CH1.
+  * @note  DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_FSMC_NADV_REMAP)
+
+/**
+  * @brief Controls the use of the optional FSMC_NADV signal.
+  * @note  DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral.
+  * @retval None
+  */
+#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
+
+/**
+  * @brief Controls the use of the optional FSMC_NADV signal.
+  * @note  CONNECTED: The NADV signal is connected to the output (default).
+  * @retval None
+  */
+#define __HAL_AFIO_FSMCNADV_CONNECTED()    CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM15_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2.
+  * @note  ENABLE: Remap     (TIM15_CH1 on PB14 and TIM15_CH2 on PB15).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM15_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2.
+  * @note  DISABLE: No remap (TIM15_CH1 on PA2  and TIM15_CH2 on PA3).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM16_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM16_CH1.
+  * @note  ENABLE: Remap     (TIM16_CH1 on PA6).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM16_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM16_CH1.
+  * @note  DISABLE: No remap (TIM16_CH1 on PB8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM17_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM17_CH1.
+  * @note  ENABLE: Remap     (TIM17_CH1 on PA7).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM17_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM17_CH1.
+  * @note  DISABLE: No remap (TIM17_CH1 on PB9).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_CEC_REMAP)
+
+/**
+  * @brief Enable the remapping of CEC.
+  * @note  ENABLE: Remap     (CEC on PB10).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CEC_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
+
+/**
+  * @brief Disable the remapping of CEC.
+  * @note  DISABLE: No remap (CEC on PB8).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM1_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
+  * @note  ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
+  * @note  DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3).
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
+  * @note  ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
+
+/**
+  * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
+  * @note  DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4)
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_TIM12_REMAP)
+
+/**
+  * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2.
+  * @note  ENABLE: Remap     (TIM12_CH1 on PB12 and TIM12_CH2 on PB13).
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM12_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
+
+/**
+  * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2.
+  * @note  DISABLE: No remap (TIM12_CH1 on PC4  and TIM12_CH2 on PC5).
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
+#endif
+
+#if defined(AFIO_MAPR2_MISC_REMAP)
+
+/**
+  * @brief Miscellaneous features remapping.
+  *        This bit is set and cleared by software. It controls miscellaneous features.
+  *        The DMA2 channel 5 interrupt position in the vector table.
+  *        The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
+  * @note  ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is
+  *        selected as DAC Trigger 3, TIM15 triggers TIM1/3.
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_MISC_ENABLE()  SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
+
+/**
+  * @brief Miscellaneous features remapping.
+  *        This bit is set and cleared by software. It controls miscellaneous features.
+  *        The DMA2 channel 5 interrupt position in the vector table.
+  *        The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
+  * @note  DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO
+  *        event is selected as DAC Trigger 3, TIM5 triggers TIM1/3.
+  * @note  This bit is available only in high density value line devices.
+  * @retval None
+  */
+#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros
+  * @{
+  */
+#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
+                                   ((__GPIOx__) == (GPIOB))? 1uL :\
+                                   ((__GPIOx__) == (GPIOC))? 2uL :3uL)
+#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
+                                   ((__GPIOx__) == (GPIOB))? 1uL :\
+                                   ((__GPIOx__) == (GPIOC))? 2uL :\
+                                   ((__GPIOx__) == (GPIOD))? 3uL :4uL)
+#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
+                                   ((__GPIOx__) == (GPIOB))? 1uL :\
+                                   ((__GPIOx__) == (GPIOC))? 2uL :\
+                                   ((__GPIOx__) == (GPIOD))? 3uL :\
+                                   ((__GPIOx__) == (GPIOE))? 4uL :\
+                                   ((__GPIOx__) == (GPIOF))? 5uL :6uL)
+#endif
+
+#define AFIO_REMAP_ENABLE(REMAP_PIN)       do{ uint32_t tmpreg = AFIO->MAPR; \
+                                               tmpreg |= AFIO_MAPR_SWJ_CFG;  \
+                                               tmpreg |= REMAP_PIN;          \
+                                               AFIO->MAPR = tmpreg;          \
+                                               }while(0u)
+
+#define AFIO_REMAP_DISABLE(REMAP_PIN)      do{ uint32_t tmpreg = AFIO->MAPR;  \
+                                               tmpreg |= AFIO_MAPR_SWJ_CFG;   \
+                                               tmpreg &= ~REMAP_PIN;          \
+                                               AFIO->MAPR = tmpreg;           \
+                                               }while(0u)
+
+#define AFIO_REMAP_PARTIAL(REMAP_PIN, REMAP_PIN_MASK) do{ uint32_t tmpreg = AFIO->MAPR; \
+                                                          tmpreg &= ~REMAP_PIN_MASK;    \
+                                                          tmpreg |= AFIO_MAPR_SWJ_CFG;  \
+                                                          tmpreg |= REMAP_PIN;          \
+                                                          AFIO->MAPR = tmpreg;          \
+                                                          }while(0u)
+
+#define AFIO_DBGAFR_CONFIG(DBGAFR_SWJCFG)  do{ uint32_t tmpreg = AFIO->MAPR;     \
+                                               tmpreg &= ~AFIO_MAPR_SWJ_CFG_Msk; \
+                                               tmpreg |= DBGAFR_SWJCFG;          \
+                                               AFIO->MAPR = tmpreg;              \
+                                               }while(0u)
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup GPIOEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIOEx_Exported_Functions_Group1
+  * @{
+  */
+void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource);
+void HAL_GPIOEx_EnableEventout(void);
+void HAL_GPIOEx_DisableEventout(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_GPIO_EX_H */
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h

@@ -0,0 +1,385 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_PWR_H
+#define __STM32F1xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */ 
+
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+
+/**
+  * @}
+  */
+
+
+/* Internal constants --------------------------------------------------------*/
+
+/** @addtogroup PWR_Private_Constants
+  * @{
+  */ 
+
+#define PWR_EXTI_LINE_PVD  ((uint32_t)0x00010000)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+/**
+  * @}
+  */
+
+ 
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */ 
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+  * @{
+  */
+#define PWR_PVDLEVEL_0                  PWR_CR_PLS_2V2
+#define PWR_PVDLEVEL_1                  PWR_CR_PLS_2V3
+#define PWR_PVDLEVEL_2                  PWR_CR_PLS_2V4
+#define PWR_PVDLEVEL_3                  PWR_CR_PLS_2V5
+#define PWR_PVDLEVEL_4                  PWR_CR_PLS_2V6
+#define PWR_PVDLEVEL_5                  PWR_CR_PLS_2V7
+#define PWR_PVDLEVEL_6                  PWR_CR_PLS_2V8
+#define PWR_PVDLEVEL_7                  PWR_CR_PLS_2V9 
+                                                          
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 0x00000000U   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              0x00010001U   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             0x00010002U   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      0x00010003U   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           0x00020001U   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          0x00020002U   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   0x00020003U   /*!< Event Mode with Rising/Falling edge trigger detection */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+  * @{
+  */
+
+#define PWR_WAKEUP_PIN1                 PWR_CSR_EWUP
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        0x00000000U
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag PWR Flag
+  * @{
+  */
+#define PWR_FLAG_WU                     PWR_CSR_WUF
+#define PWR_FLAG_SB                     PWR_CSR_SBF
+#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macros PWR Exported Macros
+  * @{
+  */
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+  *                  was received from the WKUP pin or from the RTC alarm
+  *                  An additional wakeup event is detected if the WKUP pin is enabled
+  *                  (by setting the EWUP bit) when the WKUP pin level is already high.
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+  *                  For this reason, this bit is equal to 0 after Standby or reset
+  *                  until the PVDE bit is set.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the PWR's pending flags.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag
+  *            @arg PWR_FLAG_SB: StandBy flag
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2))
+
+/**
+  * @brief Enable interrupt on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()      SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable interrupt on PVD Exti Line 16. 
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()     CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set falling edge trigger.  
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()  SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set rising edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief  PVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+
+
+/**
+  * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()       (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD EXTI flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()     (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT()  SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+  * @{
+  */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL)) 
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1))
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+
+/**
+  * @}
+  */
+
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+
+/* Initialization and de-initialization functions *******************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+/* #define HAL_PWR_ConfigPVD 12*/
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+
+
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F1xx_HAL_PWR_H */

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h

@@ -0,0 +1,261 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of TIM HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_TIM_EX_H
+#define STM32F1xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+  * @{
+  */
+
+/**
+  * @brief  TIM Hall sensor Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t IC1Polarity;         /*!< Specifies the active edge of the input signal.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t Commutation_Delay;   /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+/**
+  * @}
+  */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* End of exported macro -----------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* End of private macro ------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+  *  @brief    Timer Hall Sensor functions
+  * @{
+  */
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+  *  @brief   Timer Complementary Output Compare functions
+  * @{
+  */
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+                                          uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+  *  @brief    Timer Complementary PWM functions
+  * @{
+  */
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+                                           uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+  *  @brief    Timer Complementary One Pulse functions
+  * @{
+  */
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+  *  @brief    Peripheral Control functions
+  * @{
+  */
+/* Extended Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                              uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                 uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                  uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+                                                        const TIM_MasterConfigTypeDef *sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+                                                const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+  * @brief    Extended Callbacks functions
+  * @{
+  */
+/* Extended Callback **********************************************************/
+void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+  * @brief    Extended Peripheral State functions
+  * @{
+  */
+/* Extended Peripheral State functions  ***************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim,  uint32_t ChannelN);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions
+  * @{
+  */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/* End of private functions --------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F1xx_HAL_TIM_EX_H */

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h

@@ -0,0 +1,915 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_uart.h
+  * @author  MCD Application Team
+  * @brief   Header file of UART HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_UART_H
+#define __STM32F1xx_HAL_UART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup UART
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+  * @{
+  */
+
+/**
+  * @brief UART Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the UART communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                           - IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate)))
+                                           - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref UART_Word_Length */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref UART_Stop_Bits */
+
+  uint32_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref UART_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref UART_Mode */
+
+  uint32_t HwFlowCtl;                 /*!< Specifies whether the hardware flow control mode is enabled or disabled.
+                                           This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+  uint32_t OverSampling;              /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+                                           This parameter can be a value of @ref UART_Over_Sampling. This feature is only available
+                                           on STM32F100xx family, so OverSampling parameter should always be set to 16. */
+} UART_InitTypeDef;
+
+/**
+  * @brief HAL UART State structures definition
+  * @note  HAL UART State value is a combination of 2 different substates: gState and RxState.
+  *        - gState contains UART state information related to global Handle management
+  *          and also information related to Tx operations.
+  *          gState value coding follow below described bitmap :
+  *          b7-b6  Error information
+  *             00 : No Error
+  *             01 : (Not Used)
+  *             10 : Timeout
+  *             11 : Error
+  *          b5     Peripheral initialization status
+  *             0  : Reset (Peripheral not initialized)
+  *             1  : Init done (Peripheral initialized. HAL UART Init function already called)
+  *          b4-b3  (not used)
+  *             xx : Should be set to 00
+  *          b2     Intrinsic process state
+  *             0  : Ready
+  *             1  : Busy (Peripheral busy with some configuration or internal operations)
+  *          b1     (not used)
+  *             x  : Should be set to 0
+  *          b0     Tx state
+  *             0  : Ready (no Tx operation ongoing)
+  *             1  : Busy (Tx operation ongoing)
+  *        - RxState contains information related to Rx operations.
+  *          RxState value coding follow below described bitmap :
+  *          b7-b6  (not used)
+  *             xx : Should be set to 00
+  *          b5     Peripheral initialization status
+  *             0  : Reset (Peripheral not initialized)
+  *             1  : Init done (Peripheral initialized)
+  *          b4-b2  (not used)
+  *            xxx : Should be set to 000
+  *          b1     Rx state
+  *             0  : Ready (no Rx operation ongoing)
+  *             1  : Busy (Rx operation ongoing)
+  *          b0     (not used)
+  *             x  : Should be set to 0.
+  */
+typedef enum
+{
+  HAL_UART_STATE_RESET             = 0x00U,    /*!< Peripheral is not yet Initialized
+                                                   Value is allowed for gState and RxState */
+  HAL_UART_STATE_READY             = 0x20U,    /*!< Peripheral Initialized and ready for use
+                                                   Value is allowed for gState and RxState */
+  HAL_UART_STATE_BUSY              = 0x24U,    /*!< an internal process is ongoing
+                                                   Value is allowed for gState only */
+  HAL_UART_STATE_BUSY_TX           = 0x21U,    /*!< Data Transmission process is ongoing
+                                                   Value is allowed for gState only */
+  HAL_UART_STATE_BUSY_RX           = 0x22U,    /*!< Data Reception process is ongoing
+                                                   Value is allowed for RxState only */
+  HAL_UART_STATE_BUSY_TX_RX        = 0x23U,    /*!< Data Transmission and Reception process is ongoing
+                                                   Not to be used for neither gState nor RxState.
+                                                   Value is result of combination (Or) between gState and RxState values */
+  HAL_UART_STATE_TIMEOUT           = 0xA0U,    /*!< Timeout state
+                                                   Value is allowed for gState only */
+  HAL_UART_STATE_ERROR             = 0xE0U     /*!< Error
+                                                   Value is allowed for gState only */
+} HAL_UART_StateTypeDef;
+
+/**
+  * @brief HAL UART Reception type definition
+  * @note  HAL UART Reception type value aims to identify which type of Reception is ongoing.
+  *        This parameter can be a value of @ref UART_Reception_Type_Values :
+  *           HAL_UART_RECEPTION_STANDARD         = 0x00U,
+  *           HAL_UART_RECEPTION_TOIDLE           = 0x01U,
+  */
+typedef uint32_t HAL_UART_RxTypeTypeDef;
+
+/**
+  * @brief HAL UART Rx Event type definition
+  * @note  HAL UART Rx Event type value aims to identify which type of Event has occurred
+  *        leading to call of the RxEvent callback.
+  *        This parameter can be a value of @ref UART_RxEvent_Type_Values :
+  *           HAL_UART_RXEVENT_TC                 = 0x00U,
+  *           HAL_UART_RXEVENT_HT                 = 0x01U,
+  *           HAL_UART_RXEVENT_IDLE               = 0x02U,
+  */
+typedef uint32_t HAL_UART_RxEventTypeTypeDef;
+
+/**
+  * @brief  UART handle Structure definition
+  */
+typedef struct __UART_HandleTypeDef
+{
+  USART_TypeDef                 *Instance;        /*!< UART registers base address        */
+
+  UART_InitTypeDef              Init;             /*!< UART communication parameters      */
+
+  const uint8_t                 *pTxBuffPtr;      /*!< Pointer to UART Tx transfer Buffer */
+
+  uint16_t                      TxXferSize;       /*!< UART Tx Transfer size              */
+
+  __IO uint16_t                 TxXferCount;      /*!< UART Tx Transfer Counter           */
+
+  uint8_t                       *pRxBuffPtr;      /*!< Pointer to UART Rx transfer Buffer */
+
+  uint16_t                      RxXferSize;       /*!< UART Rx Transfer size              */
+
+  __IO uint16_t                 RxXferCount;      /*!< UART Rx Transfer Counter           */
+
+  __IO HAL_UART_RxTypeTypeDef ReceptionType;      /*!< Type of ongoing reception          */
+
+  __IO HAL_UART_RxEventTypeTypeDef RxEventType;   /*!< Type of Rx Event                   */
+
+  DMA_HandleTypeDef             *hdmatx;          /*!< UART Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef             *hdmarx;          /*!< UART Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef               Lock;             /*!< Locking object                     */
+
+  __IO HAL_UART_StateTypeDef    gState;           /*!< UART state information related to global Handle management
+                                                       and also related to Tx operations.
+                                                       This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+  __IO HAL_UART_StateTypeDef    RxState;          /*!< UART state information related to Rx operations.
+                                                       This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+  __IO uint32_t                 ErrorCode;        /*!< UART Error code                    */
+
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+  void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart);        /*!< UART Tx Half Complete Callback        */
+  void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart);            /*!< UART Tx Complete Callback             */
+  void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart);        /*!< UART Rx Half Complete Callback        */
+  void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart);            /*!< UART Rx Complete Callback             */
+  void (* ErrorCallback)(struct __UART_HandleTypeDef *huart);             /*!< UART Error Callback                   */
+  void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart);         /*!< UART Abort Complete Callback          */
+  void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
+  void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart);  /*!< UART Abort Receive Complete Callback  */
+  void (* WakeupCallback)(struct __UART_HandleTypeDef *huart);            /*!< UART Wakeup Callback                  */
+  void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback     */
+
+  void (* MspInitCallback)(struct __UART_HandleTypeDef *huart);           /*!< UART Msp Init callback                */
+  void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart);         /*!< UART Msp DeInit callback              */
+#endif  /* USE_HAL_UART_REGISTER_CALLBACKS */
+
+} UART_HandleTypeDef;
+
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL UART Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_UART_TX_HALFCOMPLETE_CB_ID         = 0x00U,    /*!< UART Tx Half Complete Callback ID        */
+  HAL_UART_TX_COMPLETE_CB_ID             = 0x01U,    /*!< UART Tx Complete Callback ID             */
+  HAL_UART_RX_HALFCOMPLETE_CB_ID         = 0x02U,    /*!< UART Rx Half Complete Callback ID        */
+  HAL_UART_RX_COMPLETE_CB_ID             = 0x03U,    /*!< UART Rx Complete Callback ID             */
+  HAL_UART_ERROR_CB_ID                   = 0x04U,    /*!< UART Error Callback ID                   */
+  HAL_UART_ABORT_COMPLETE_CB_ID          = 0x05U,    /*!< UART Abort Complete Callback ID          */
+  HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U,    /*!< UART Abort Transmit Complete Callback ID */
+  HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID  = 0x07U,    /*!< UART Abort Receive Complete Callback ID  */
+  HAL_UART_WAKEUP_CB_ID                  = 0x08U,    /*!< UART Wakeup Callback ID                  */
+
+  HAL_UART_MSPINIT_CB_ID                 = 0x0BU,    /*!< UART MspInit callback ID                 */
+  HAL_UART_MSPDEINIT_CB_ID               = 0x0CU     /*!< UART MspDeInit callback ID               */
+
+} HAL_UART_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL UART Callback pointer definition
+  */
+typedef  void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart);  /*!< pointer to an UART callback function */
+typedef  void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos);   /*!< pointer to a UART Rx Event specific callback function */
+
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported Constants
+  * @{
+  */
+
+/** @defgroup UART_Error_Code UART Error Code
+  * @{
+  */
+#define HAL_UART_ERROR_NONE              0x00000000U   /*!< No error            */
+#define HAL_UART_ERROR_PE                0x00000001U   /*!< Parity error        */
+#define HAL_UART_ERROR_NE                0x00000002U   /*!< Noise error         */
+#define HAL_UART_ERROR_FE                0x00000004U   /*!< Frame error         */
+#define HAL_UART_ERROR_ORE               0x00000008U   /*!< Overrun error       */
+#define HAL_UART_ERROR_DMA               0x00000010U   /*!< DMA transfer error  */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+#define  HAL_UART_ERROR_INVALID_CALLBACK 0x00000020U   /*!< Invalid Callback error  */
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup UART_Word_Length UART Word Length
+  * @{
+  */
+#define UART_WORDLENGTH_8B                  0x00000000U
+#define UART_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+  * @{
+  */
+#define UART_STOPBITS_1                     0x00000000U
+#define UART_STOPBITS_2                     ((uint32_t)USART_CR2_STOP_1)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Parity UART Parity
+  * @{
+  */
+#define UART_PARITY_NONE                    0x00000000U
+#define UART_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+  * @{
+  */
+#define UART_HWCONTROL_NONE                  0x00000000U
+#define UART_HWCONTROL_RTS                   ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS                   ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS               ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Mode UART Transfer Mode
+  * @{
+  */
+#define UART_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE | USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup UART_State UART State
+  * @{
+  */
+#define UART_STATE_DISABLE                  0x00000000U
+#define UART_STATE_ENABLE                   ((uint32_t)USART_CR1_UE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+  * @{
+  */
+#define UART_OVERSAMPLING_16                    0x00000000U
+#if defined(USART_CR1_OVER8)
+#define UART_OVERSAMPLING_8                     ((uint32_t)USART_CR1_OVER8)
+#endif /* USART_CR1_OVER8 */
+/**
+  * @}
+  */
+
+/** @defgroup UART_LIN_Break_Detection_Length  UART LIN Break Detection Length
+  * @{
+  */
+#define UART_LINBREAKDETECTLENGTH_10B      0x00000000U
+#define UART_LINBREAKDETECTLENGTH_11B      ((uint32_t)USART_CR2_LBDL)
+/**
+  * @}
+  */
+
+/** @defgroup UART_WakeUp_functions  UART Wakeup Functions
+  * @{
+  */
+#define UART_WAKEUPMETHOD_IDLELINE                0x00000000U
+#define UART_WAKEUPMETHOD_ADDRESSMARK             ((uint32_t)USART_CR1_WAKE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Flags   UART FLags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the SR register
+  * @{
+  */
+#define UART_FLAG_CTS                       ((uint32_t)USART_SR_CTS)
+#define UART_FLAG_LBD                       ((uint32_t)USART_SR_LBD)
+#define UART_FLAG_TXE                       ((uint32_t)USART_SR_TXE)
+#define UART_FLAG_TC                        ((uint32_t)USART_SR_TC)
+#define UART_FLAG_RXNE                      ((uint32_t)USART_SR_RXNE)
+#define UART_FLAG_IDLE                      ((uint32_t)USART_SR_IDLE)
+#define UART_FLAG_ORE                       ((uint32_t)USART_SR_ORE)
+#define UART_FLAG_NE                        ((uint32_t)USART_SR_NE)
+#define UART_FLAG_FE                        ((uint32_t)USART_SR_FE)
+#define UART_FLAG_PE                        ((uint32_t)USART_SR_PE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Interrupt_definition  UART Interrupt Definitions
+  *        Elements values convention: 0xY000XXXX
+  *           - XXXX  : Interrupt mask (16 bits) in the Y register
+  *           - Y  : Interrupt source register (2bits)
+  *                   - 0001: CR1 register
+  *                   - 0010: CR2 register
+  *                   - 0011: CR3 register
+  * @{
+  */
+
+#define UART_IT_PE                       ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
+#define UART_IT_TXE                      ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
+#define UART_IT_TC                       ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
+#define UART_IT_RXNE                     ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
+#define UART_IT_IDLE                     ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
+
+#define UART_IT_LBD                      ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
+
+#define UART_IT_CTS                      ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
+#define UART_IT_ERR                      ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Reception_Type_Values  UART Reception type values
+  * @{
+  */
+#define HAL_UART_RECEPTION_STANDARD          (0x00000000U)             /*!< Standard reception                       */
+#define HAL_UART_RECEPTION_TOIDLE            (0x00000001U)             /*!< Reception till completion or IDLE event  */
+/**
+  * @}
+  */
+
+/** @defgroup UART_RxEvent_Type_Values  UART RxEvent type values
+  * @{
+  */
+#define HAL_UART_RXEVENT_TC                  (0x00000000U)             /*!< RxEvent linked to Transfer Complete event */
+#define HAL_UART_RXEVENT_HT                  (0x00000001U)             /*!< RxEvent linked to Half Transfer event     */
+#define HAL_UART_RXEVENT_IDLE                (0x00000002U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+  * @{
+  */
+
+/** @brief Reset UART handle gstate & RxState
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_UART_STATE_RESET;      \
+                                                       (__HANDLE__)->RxState = HAL_UART_STATE_RESET;     \
+                                                       (__HANDLE__)->MspInitCallback = NULL;             \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;           \
+                                                     } while(0U)
+#else
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_UART_STATE_RESET;      \
+                                                       (__HANDLE__)->RxState = HAL_UART_STATE_RESET;     \
+                                                     } while(0U)
+#endif /*USE_HAL_UART_REGISTER_CALLBACKS */
+
+/** @brief  Flushes the UART DR register
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief  Checks whether the specified UART flag is set or not.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __FLAG__ specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg UART_FLAG_CTS:  CTS Change flag (not available for UART4 and UART5)
+  *            @arg UART_FLAG_LBD:  LIN Break detection flag
+  *            @arg UART_FLAG_TXE:  Transmit data register empty flag
+  *            @arg UART_FLAG_TC:   Transmission Complete flag
+  *            @arg UART_FLAG_RXNE: Receive data register not empty flag
+  *            @arg UART_FLAG_IDLE: Idle Line detection flag
+  *            @arg UART_FLAG_ORE:  Overrun Error flag
+  *            @arg UART_FLAG_NE:   Noise Error flag
+  *            @arg UART_FLAG_FE:   Framing Error flag
+  *            @arg UART_FLAG_PE:   Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified UART pending flag.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __FLAG__ specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg UART_FLAG_CTS:  CTS Change flag (not available for UART4 and UART5).
+  *            @arg UART_FLAG_LBD:  LIN Break detection flag.
+  *            @arg UART_FLAG_TC:   Transmission Complete flag.
+  *            @arg UART_FLAG_RXNE: Receive data register not empty flag.
+  *
+  * @note   PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+  *          error) and IDLE (Idle line detected) flags are cleared by software
+  *          sequence: a read operation to USART_SR register followed by a read
+  *          operation to USART_DR register.
+  * @note   RXNE flag can be also cleared by a read to the USART_DR register.
+  * @note   TC flag can be also cleared by software sequence: a read operation to
+  *          USART_SR register followed by a write operation to USART_DR register.
+  * @note   TXE flag is cleared only by a write to the USART_DR register.
+  *
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief  Clears the UART PE pending flag.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__)     \
+  do{                                           \
+    __IO uint32_t tmpreg = 0x00U;               \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    tmpreg = (__HANDLE__)->Instance->DR;        \
+    UNUSED(tmpreg);                             \
+  } while(0U)
+
+/** @brief  Clears the UART FE pending flag.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clears the UART NE pending flag.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clears the UART ORE pending flag.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clears the UART IDLE pending flag.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Enable the specified UART interrupt.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __INTERRUPT__ specifies the UART interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CTS:  CTS change interrupt
+  *            @arg UART_IT_LBD:  LIN Break detection interrupt
+  *            @arg UART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:   Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_PE:   Parity Error interrupt
+  *            @arg UART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+                                                           ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief  Disable the specified UART interrupt.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __INTERRUPT__ specifies the UART interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CTS:  CTS change interrupt
+  *            @arg UART_IT_LBD:  LIN Break detection interrupt
+  *            @arg UART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:   Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_PE:   Parity Error interrupt
+  *            @arg UART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+                                                           ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief  Checks whether the specified UART interrupt source is enabled or not.
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         UART Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @param  __IT__ specifies the UART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+  *            @arg UART_IT_LBD: LIN Break detection interrupt
+  *            @arg UART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:  Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_ERR: Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \
+                                                       (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief  Enable CTS flow control
+  * @note   This macro allows to enable CTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         The Handle Instance can be any USARTx (supporting the HW Flow control feature).
+  *         It is used to select the USART peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__)        \
+  do{                                                      \
+    ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE);  \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE;        \
+  } while(0U)
+
+/** @brief  Disable CTS flow control
+  * @note   This macro allows to disable CTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         The Handle Instance can be any USARTx (supporting the HW Flow control feature).
+  *         It is used to select the USART peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__)        \
+  do{                                                       \
+    ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE);      \
+  } while(0U)
+
+/** @brief  Enable RTS flow control
+  *         This macro allows to enable RTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         The Handle Instance can be any USARTx (supporting the HW Flow control feature).
+  *         It is used to select the USART peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__)       \
+  do{                                                     \
+    ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE;       \
+  } while(0U)
+
+/** @brief  Disable RTS flow control
+  *         This macro allows to disable RTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__ specifies the UART Handle.
+  *         The Handle Instance can be any USARTx (supporting the HW Flow control feature).
+  *         It is used to select the USART peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__)       \
+  do{                                                      \
+    ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE);     \
+  } while(0U)
+#if defined(USART_CR3_ONEBIT)
+
+/** @brief  Macro to enable the UART's one bit sample method
+  * @param  __HANDLE__ specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  Macro to disable the UART's one bit sample method
+  * @param  __HANDLE__ specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\
+                                                       &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+#endif /* UART_ONE_BIT_SAMPLE_Feature */
+
+/** @brief  Enable UART
+  * @param  __HANDLE__ specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable UART
+  * @param  __HANDLE__ specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID,
+                                            pUART_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
+                                           uint32_t Timeout);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
+HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart);
+
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
+
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
+
+void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size);
+
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart);
+uint32_t              HAL_UART_GetError(const UART_HandleTypeDef *huart);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+  * @{
+  */
+/** @brief UART interruptions flag mask
+  *
+  */
+#define UART_IT_MASK                     0x0000FFFFU
+
+#define UART_CR1_REG_INDEX               1U
+#define UART_CR2_REG_INDEX               2U
+#define UART_CR3_REG_INDEX               3U
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+  * @{
+  */
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+                                     ((LENGTH) == UART_WORDLENGTH_9B))
+#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+                                    ((STOPBITS) == UART_STOPBITS_2))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+                                ((PARITY) == UART_PARITY_EVEN) || \
+                                ((PARITY) == UART_PARITY_ODD))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+                              (((CONTROL) == UART_HWCONTROL_NONE) || \
+                               ((CONTROL) == UART_HWCONTROL_RTS) || \
+                               ((CONTROL) == UART_HWCONTROL_CTS) || \
+                               ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U))
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+                              ((STATE) == UART_STATE_ENABLE))
+#if defined(USART_CR1_OVER8)
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+                                        ((SAMPLING) == UART_OVERSAMPLING_8))
+#endif /* USART_CR1_OVER8 */
+#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+                                                 ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+                                      ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 4500000U)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
+
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_)            (((_PCLK_)*25U)/(4U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_)        (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_)        ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U)\
+                                                         + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+            = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
+#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_)            (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
+                                                         (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
+                                                        (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
+
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_)             (((_PCLK_)*25U)/(2U*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_)         (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
+#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_)         ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U)\
+                                                         + 50U) / 100U)
+/* UART BRR = mantissa + overflow + fraction
+            = (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
+#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_)             (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
+                                                         ((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
+                                                        (UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup UART_Private_Functions UART Private Functions
+  * @{
+  */
+
+HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_UART_H */
+

diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h

@@ -0,0 +1,638 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_ll_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX LL module.
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The LL CORTEX driver contains a set of generic APIs that can be
+    used by user:
+      (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick
+          functions
+      (+) Low power mode configuration (SCB register of Cortex-MCU)
+      (+) MPU API to configure and enable regions
+          (MPU services provided only on some devices)
+      (+) API to access to MCU info (CPUID register)
+      (+) API to enable fault handler (SHCSR accesses)
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_LL_CORTEX_H
+#define __STM32F1xx_LL_CORTEX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+
+/** @addtogroup STM32F1xx_LL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX_LL CORTEX
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
+  * @{
+  */
+#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8     0x00000000U                 /*!< AHB clock divided by 8 selected as SysTick clock source.*/
+#define LL_SYSTICK_CLKSOURCE_HCLK          SysTick_CTRL_CLKSOURCE_Msk  /*!< AHB clock selected as SysTick clock source. */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
+  * @{
+  */
+#define LL_HANDLER_FAULT_USG               SCB_SHCSR_USGFAULTENA_Msk              /*!< Usage fault */
+#define LL_HANDLER_FAULT_BUS               SCB_SHCSR_BUSFAULTENA_Msk              /*!< Bus fault */
+#define LL_HANDLER_FAULT_MEM               SCB_SHCSR_MEMFAULTENA_Msk              /*!< Memory management fault */
+/**
+  * @}
+  */
+
+#if __MPU_PRESENT
+
+/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
+  * @{
+  */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE     0x00000000U                                       /*!< Disable NMI and privileged SW access */
+#define LL_MPU_CTRL_HARDFAULT_NMI          MPU_CTRL_HFNMIENA_Msk                             /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
+#define LL_MPU_CTRL_PRIVILEGED_DEFAULT     MPU_CTRL_PRIVDEFENA_Msk                           /*!< Enable privileged software access to default memory map */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF          (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
+  * @{
+  */
+#define LL_MPU_REGION_NUMBER0              0x00U /*!< REGION Number 0 */
+#define LL_MPU_REGION_NUMBER1              0x01U /*!< REGION Number 1 */
+#define LL_MPU_REGION_NUMBER2              0x02U /*!< REGION Number 2 */
+#define LL_MPU_REGION_NUMBER3              0x03U /*!< REGION Number 3 */
+#define LL_MPU_REGION_NUMBER4              0x04U /*!< REGION Number 4 */
+#define LL_MPU_REGION_NUMBER5              0x05U /*!< REGION Number 5 */
+#define LL_MPU_REGION_NUMBER6              0x06U /*!< REGION Number 6 */
+#define LL_MPU_REGION_NUMBER7              0x07U /*!< REGION Number 7 */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
+  * @{
+  */
+#define LL_MPU_REGION_SIZE_32B             (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64B             (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128B            (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256B            (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512B            (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1KB             (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2KB             (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4KB             (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8KB             (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16KB            (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32KB            (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64KB            (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128KB           (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256KB           (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512KB           (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1MB             (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2MB             (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4MB             (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8MB             (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16MB            (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32MB            (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64MB            (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128MB           (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256MB           (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512MB           (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1GB             (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2GB             (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4GB             (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
+  * @{
+  */
+#define LL_MPU_REGION_NO_ACCESS            (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
+#define LL_MPU_REGION_PRIV_RW              (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
+#define LL_MPU_REGION_PRIV_RW_URO          (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
+#define LL_MPU_REGION_FULL_ACCESS          (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
+#define LL_MPU_REGION_PRIV_RO              (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
+#define LL_MPU_REGION_PRIV_RO_URO          (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
+  * @{
+  */
+#define LL_MPU_TEX_LEVEL0                  (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
+#define LL_MPU_TEX_LEVEL1                  (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
+#define LL_MPU_TEX_LEVEL2                  (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
+#define LL_MPU_TEX_LEVEL4                  (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
+  * @{
+  */
+#define LL_MPU_INSTRUCTION_ACCESS_ENABLE   0x00U            /*!< Instruction fetches enabled */
+#define LL_MPU_INSTRUCTION_ACCESS_DISABLE  MPU_RASR_XN_Msk  /*!< Instruction fetches disabled*/
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_SHAREABLE            MPU_RASR_S_Msk   /*!< Shareable memory attribute */
+#define LL_MPU_ACCESS_NOT_SHAREABLE        0x00U            /*!< Not Shareable memory attribute */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_CACHEABLE            MPU_RASR_C_Msk   /*!< Cacheable memory attribute */
+#define LL_MPU_ACCESS_NOT_CACHEABLE        0x00U            /*!< Not Cacheable memory attribute */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_BUFFERABLE           MPU_RASR_B_Msk   /*!< Bufferable memory attribute */
+#define LL_MPU_ACCESS_NOT_BUFFERABLE       0x00U            /*!< Not Bufferable memory attribute */
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
+  * @{
+  */
+
+/**
+  * @brief  This function checks if the Systick counter flag is active or not.
+  * @note   It can be used in timeout function on application side.
+  * @rmtoll STK_CTRL     COUNTFLAG     LL_SYSTICK_IsActiveCounterFlag
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
+{
+  return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
+}
+
+/**
+  * @brief  Configures the SysTick clock source
+  * @rmtoll STK_CTRL     CLKSOURCE     LL_SYSTICK_SetClkSource
+  * @param  Source This parameter can be one of the following values:
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
+{
+  if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
+  {
+    SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+  }
+  else
+  {
+    CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+  }
+}
+
+/**
+  * @brief  Get the SysTick clock source
+  * @rmtoll STK_CTRL     CLKSOURCE     LL_SYSTICK_GetClkSource
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
+{
+  return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+}
+
+/**
+  * @brief  Enable SysTick exception request
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_EnableIT
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
+{
+  SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  Disable SysTick exception request
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_DisableIT
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
+{
+  CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  Checks if the SYSTICK interrupt is enabled or disabled.
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_IsEnabledIT
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
+{
+  return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
+  * @{
+  */
+
+/**
+  * @brief  Processor uses sleep as its low power mode
+  * @rmtoll SCB_SCR      SLEEPDEEP     LL_LPM_EnableSleep
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableSleep(void)
+{
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+  * @brief  Processor uses deep sleep as its low power mode
+  * @rmtoll SCB_SCR      SLEEPDEEP     LL_LPM_EnableDeepSleep
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
+{
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+  * @brief  Configures sleep-on-exit when returning from Handler mode to Thread mode.
+  * @note   Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
+  *         empty main application.
+  * @rmtoll SCB_SCR      SLEEPONEXIT   LL_LPM_EnableSleepOnExit
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief  Do not sleep when returning to Thread mode.
+  * @rmtoll SCB_SCR      SLEEPONEXIT   LL_LPM_DisableSleepOnExit
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief  Enabled events and all interrupts, including disabled interrupts, can wakeup the
+  *         processor.
+  * @rmtoll SCB_SCR      SEVEONPEND    LL_LPM_EnableEventOnPend
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
+{
+  /* Set SEVEONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @brief  Only enabled interrupts or events can wakeup the processor, disabled interrupts are
+  *         excluded
+  * @rmtoll SCB_SCR      SEVEONPEND    LL_LPM_DisableEventOnPend
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
+{
+  /* Clear SEVEONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
+  * @{
+  */
+
+/**
+  * @brief  Enable a fault in System handler control register (SHCSR)
+  * @rmtoll SCB_SHCSR    MEMFAULTENA   LL_HANDLER_EnableFault
+  * @param  Fault This parameter can be a combination of the following values:
+  *         @arg @ref LL_HANDLER_FAULT_USG
+  *         @arg @ref LL_HANDLER_FAULT_BUS
+  *         @arg @ref LL_HANDLER_FAULT_MEM
+  * @retval None
+  */
+__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
+{
+  /* Enable the system handler fault */
+  SET_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+  * @brief  Disable a fault in System handler control register (SHCSR)
+  * @rmtoll SCB_SHCSR    MEMFAULTENA   LL_HANDLER_DisableFault
+  * @param  Fault This parameter can be a combination of the following values:
+  *         @arg @ref LL_HANDLER_FAULT_USG
+  *         @arg @ref LL_HANDLER_FAULT_BUS
+  *         @arg @ref LL_HANDLER_FAULT_MEM
+  * @retval None
+  */
+__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
+{
+  /* Disable the system handler fault */
+  CLEAR_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
+  * @{
+  */
+
+/**
+  * @brief  Get Implementer code
+  * @rmtoll SCB_CPUID    IMPLEMENTER   LL_CPUID_GetImplementer
+  * @retval Value should be equal to 0x41 for ARM
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
+}
+
+/**
+  * @brief  Get Variant number (The r value in the rnpn product revision identifier)
+  * @rmtoll SCB_CPUID    VARIANT       LL_CPUID_GetVariant
+  * @retval Value between 0 and 255 (0x1: revision 1, 0x2: revision 2)
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
+}
+
+/**
+  * @brief  Get Constant number
+  * @rmtoll SCB_CPUID    ARCHITECTURE  LL_CPUID_GetConstant
+  * @retval Value should be equal to 0xF for Cortex-M3 devices
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
+}
+
+/**
+  * @brief  Get Part number
+  * @rmtoll SCB_CPUID    PARTNO        LL_CPUID_GetParNo
+  * @retval Value should be equal to 0xC23 for Cortex-M3
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
+}
+
+/**
+  * @brief  Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
+  * @rmtoll SCB_CPUID    REVISION      LL_CPUID_GetRevision
+  * @retval Value between 0 and 255 (0x0: patch 0, 0x1: patch 1)
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
+}
+
+/**
+  * @}
+  */
+
+#if __MPU_PRESENT
+/** @defgroup CORTEX_LL_EF_MPU MPU
+  * @{
+  */
+
+/**
+  * @brief  Enable MPU with input options
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_Enable
+  * @param  Options This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
+  *         @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
+  *         @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
+  *         @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
+{
+  /* Enable the MPU*/
+  WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
+  /* Ensure MPU settings take effects */
+  __DSB();
+  /* Sequence instruction fetches using update settings */
+  __ISB();
+}
+
+/**
+  * @brief  Disable MPU
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_Disable
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_Disable(void)
+{
+  /* Make sure outstanding transfers are done */
+  __DMB();
+  /* Disable MPU*/
+  WRITE_REG(MPU->CTRL, 0U);
+}
+
+/**
+  * @brief  Check if MPU is enabled or not
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_IsEnabled
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
+{
+  return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
+}
+
+/**
+  * @brief  Enable a MPU region
+  * @rmtoll MPU_RASR     ENABLE        LL_MPU_EnableRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Enable the MPU region */
+  SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @brief  Configure and enable a region
+  * @rmtoll MPU_RNR      REGION        LL_MPU_ConfigRegion\n
+  *         MPU_RBAR     REGION        LL_MPU_ConfigRegion\n
+  *         MPU_RBAR     ADDR          LL_MPU_ConfigRegion\n
+  *         MPU_RASR     XN            LL_MPU_ConfigRegion\n
+  *         MPU_RASR     AP            LL_MPU_ConfigRegion\n
+  *         MPU_RASR     S             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     C             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     B             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     SIZE          LL_MPU_ConfigRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @param  Address Value of region base address
+  * @param  SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
+  * @param  Attributes This parameter can be a combination of the following values:
+  *         @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
+  *           or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
+  *           or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
+  *           or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
+  *           or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
+  *           or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
+  *         @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
+  *           or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
+  *         @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
+  *         @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or  @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
+  *         @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
+  *         @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
+  *         @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Set base address */
+  WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
+  /* Configure MPU */
+  WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos)));
+}
+
+/**
+  * @brief  Disable a region
+  * @rmtoll MPU_RNR      REGION        LL_MPU_DisableRegion\n
+  *         MPU_RASR     ENABLE        LL_MPU_DisableRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Disable the MPU region */
+  CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @}
+  */
+
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_LL_CORTEX_H */
+