Shteibezandt_VA/CAN_Request-Response_protocol
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
Tenocha
2024-10-31 09:45:24 +03:00
commit 99143a6a6b
904 changed files with 434971 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3783
Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h Normal file
View File

File diff suppressed because it is too large Load Diff

358
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h Normal file
View File

@@ -0,0 +1,358 @@
/**
******************************************************************************
* @file stm32f1xx_hal.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_H
#define __STM32F1xx_HAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_conf.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup HAL
* @{
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup HAL_Exported_Constants HAL Exported Constants
* @{
*/
/** @defgroup HAL_TICK_FREQ Tick Frequency
* @{
*/
typedef enum
{
HAL_TICK_FREQ_10HZ = 100U,
HAL_TICK_FREQ_100HZ = 10U,
HAL_TICK_FREQ_1KHZ = 1U,
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
} HAL_TickFreqTypeDef;
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
extern __IO uint32_t uwTick;
extern uint32_t uwTickPrio;
extern HAL_TickFreqTypeDef uwTickFreq;
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup HAL_Exported_Macros HAL Exported Macros
* @{
*/
/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
* @brief Freeze/Unfreeze Peripherals in Debug mode
* Note: On devices STM32F10xx8 and STM32F10xxB,
* STM32F101xC/D/E and STM32F103xC/D/E,
* STM32F101xF/G and STM32F103xF/G
* STM32F10xx4 and STM32F10xx6
* Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
* debug mode (not accessible by the user software in normal mode).
* Refer to errata sheet of these devices for more details.
* @{
*/
/* Peripherals on APB1 */
/**
* @brief TIM2 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
/**
* @brief TIM3 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
#if defined (DBGMCU_CR_DBG_TIM4_STOP)
/**
* @brief TIM4 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM5_STOP)
/**
* @brief TIM5 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM6_STOP)
/**
* @brief TIM6 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM7_STOP)
/**
* @brief TIM7 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM12_STOP)
/**
* @brief TIM12 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM13_STOP)
/**
* @brief TIM13 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM14_STOP)
/**
* @brief TIM14 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
#endif
/**
* @brief WWDG Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
/**
* @brief IWDG Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
/**
* @brief I2C1 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
/**
* @brief I2C2 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#endif
#if defined (DBGMCU_CR_DBG_CAN1_STOP)
/**
* @brief CAN1 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
#endif
#if defined (DBGMCU_CR_DBG_CAN2_STOP)
/**
* @brief CAN2 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
#endif
/* Peripherals on APB2 */
#if defined (DBGMCU_CR_DBG_TIM1_STOP)
/**
* @brief TIM1 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM8_STOP)
/**
* @brief TIM8 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM9_STOP)
/**
* @brief TIM9 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM10_STOP)
/**
* @brief TIM10 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM11_STOP)
/**
* @brief TIM11 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM15_STOP)
/**
* @brief TIM15 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM16_STOP)
/**
* @brief TIM16 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
#endif
#if defined (DBGMCU_CR_DBG_TIM17_STOP)
/**
* @brief TIM17 Peripherals Debug mode
*/
#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
#endif
/**
* @}
*/
/** @defgroup HAL_Private_Macros HAL Private Macros
* @{
*/
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
((FREQ) == HAL_TICK_FREQ_100HZ) || \
((FREQ) == HAL_TICK_FREQ_1KHZ))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup HAL_Exported_Functions
* @{
*/
/** @addtogroup HAL_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void HAL_MspInit(void);
void HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_IncTick(void);
void HAL_Delay(uint32_t Delay);
uint32_t HAL_GetTick(void);
uint32_t HAL_GetTickPrio(void);
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
void HAL_SuspendTick(void);
void HAL_ResumeTick(void);
uint32_t HAL_GetHalVersion(void);
uint32_t HAL_GetREVID(void);
uint32_t HAL_GetDEVID(void);
uint32_t HAL_GetUIDw0(void);
uint32_t HAL_GetUIDw1(void);
uint32_t HAL_GetUIDw2(void);
void HAL_DBGMCU_EnableDBGSleepMode(void);
void HAL_DBGMCU_DisableDBGSleepMode(void);
void HAL_DBGMCU_EnableDBGStopMode(void);
void HAL_DBGMCU_DisableDBGStopMode(void);
void HAL_DBGMCU_EnableDBGStandbyMode(void);
void HAL_DBGMCU_DisableDBGStandbyMode(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup HAL_Private_Variables HAL Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup HAL_Private_Constants HAL Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

850
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h Normal file
View File

@@ -0,0 +1,850 @@
/**
******************************************************************************
* @file stm32f1xx_hal_can.h
* @author MCD Application Team
* @brief Header file of CAN HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F1xx_HAL_CAN_H
#define STM32F1xx_HAL_CAN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
#if defined (CAN1)
/** @addtogroup CAN
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CAN_Exported_Types CAN Exported Types
* @{
*/
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
HAL_CAN_STATE_LISTENING = 0x02U, /*!< CAN receive process is ongoing */
HAL_CAN_STATE_SLEEP_PENDING = 0x03U, /*!< CAN sleep request is pending */
HAL_CAN_STATE_SLEEP_ACTIVE = 0x04U, /*!< CAN sleep mode is active */
HAL_CAN_STATE_ERROR = 0x05U /*!< CAN error state */
} HAL_CAN_StateTypeDef;
/**
* @brief CAN init structure definition
*/
typedef struct
{
uint32_t Prescaler; /*!< Specifies the length of a time quantum.
This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
uint32_t Mode; /*!< Specifies the CAN operating mode.
This parameter can be a value of @ref CAN_operating_mode */
uint32_t SyncJumpWidth; /*!< Specifies the maximum number of time quanta the CAN hardware
is allowed to lengthen or shorten a bit to perform resynchronization.
This parameter can be a value of @ref CAN_synchronisation_jump_width */
uint32_t TimeSeg1; /*!< Specifies the number of time quanta in Bit Segment 1.
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
uint32_t TimeSeg2; /*!< Specifies the number of time quanta in Bit Segment 2.
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
FunctionalState TimeTriggeredMode; /*!< Enable or disable the time triggered communication mode.
This parameter can be set to ENABLE or DISABLE. */
FunctionalState AutoBusOff; /*!< Enable or disable the automatic bus-off management.
This parameter can be set to ENABLE or DISABLE. */
FunctionalState AutoWakeUp; /*!< Enable or disable the automatic wake-up mode.
This parameter can be set to ENABLE or DISABLE. */
FunctionalState AutoRetransmission; /*!< Enable or disable the non-automatic retransmission mode.
This parameter can be set to ENABLE or DISABLE. */
FunctionalState ReceiveFifoLocked; /*!< Enable or disable the Receive FIFO Locked mode.
This parameter can be set to ENABLE or DISABLE. */
FunctionalState TransmitFifoPriority;/*!< Enable or disable the transmit FIFO priority.
This parameter can be set to ENABLE or DISABLE. */
} CAN_InitTypeDef;
/**
* @brief CAN filter configuration structure definition
*/
typedef struct
{
uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
configuration, first one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
configuration, second one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
according to the mode (MSBs for a 32-bit configuration,
first one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
according to the mode (LSBs for a 32-bit configuration,
second one for a 16-bit configuration).
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
This parameter can be a value of @ref CAN_filter_FIFO */
uint32_t FilterBank; /*!< Specifies the filter bank which will be initialized.
For single CAN instance(14 dedicated filter banks),
this parameter must be a number between Min_Data = 0 and Max_Data = 13.
For dual CAN instances(28 filter banks shared),
this parameter must be a number between Min_Data = 0 and Max_Data = 27. */
uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
This parameter can be a value of @ref CAN_filter_mode */
uint32_t FilterScale; /*!< Specifies the filter scale.
This parameter can be a value of @ref CAN_filter_scale */
uint32_t FilterActivation; /*!< Enable or disable the filter.
This parameter can be a value of @ref CAN_filter_activation */
uint32_t SlaveStartFilterBank; /*!< Select the start filter bank for the slave CAN instance.
For single CAN instances, this parameter is meaningless.
For dual CAN instances, all filter banks with lower index are assigned to master
CAN instance, whereas all filter banks with greater index are assigned to slave
CAN instance.
This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
} CAN_FilterTypeDef;
/**
* @brief CAN Tx message header structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
uint32_t ExtId; /*!< Specifies the extended identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
This parameter can be a value of @ref CAN_identifier_type */
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
This parameter can be a value of @ref CAN_remote_transmission_request */
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
FunctionalState TransmitGlobalTime; /*!< Specifies whether the timestamp counter value captured on start
of frame transmission, is sent in DATA6 and DATA7 replacing pData[6] and pData[7].
@note: Time Triggered Communication Mode must be enabled.
@note: DLC must be programmed as 8 bytes, in order these 2 bytes are sent.
This parameter can be set to ENABLE or DISABLE. */
} CAN_TxHeaderTypeDef;
/**
* @brief CAN Rx message header structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
uint32_t ExtId; /*!< Specifies the extended identifier.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
This parameter can be a value of @ref CAN_identifier_type */
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
This parameter can be a value of @ref CAN_remote_transmission_request */
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
uint32_t Timestamp; /*!< Specifies the timestamp counter value captured on start of frame reception.
@note: Time Triggered Communication Mode must be enabled.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF. */
uint32_t FilterMatchIndex; /*!< Specifies the index of matching acceptance filter element.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
} CAN_RxHeaderTypeDef;
/**
* @brief CAN handle Structure definition
*/
typedef struct __CAN_HandleTypeDef
{
CAN_TypeDef *Instance; /*!< Register base address */
CAN_InitTypeDef Init; /*!< CAN required parameters */
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
__IO uint32_t ErrorCode; /*!< CAN Error code.
This parameter can be a value of @ref CAN_Error_Code */
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
void (* TxMailbox0CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 0 complete callback */
void (* TxMailbox1CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 1 complete callback */
void (* TxMailbox2CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 2 complete callback */
void (* TxMailbox0AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 0 abort callback */
void (* TxMailbox1AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 1 abort callback */
void (* TxMailbox2AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 2 abort callback */
void (* RxFifo0MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 msg pending callback */
void (* RxFifo0FullCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 full callback */
void (* RxFifo1MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 msg pending callback */
void (* RxFifo1FullCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 full callback */
void (* SleepCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Sleep callback */
void (* WakeUpFromRxMsgCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Wake Up from Rx msg callback */
void (* ErrorCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Error callback */
void (* MspInitCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Msp Init callback */
void (* MspDeInitCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Msp DeInit callback */
#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
} CAN_HandleTypeDef;
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
/**
* @brief HAL CAN common Callback ID enumeration definition
*/
typedef enum
{
HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID = 0x00U, /*!< CAN Tx Mailbox 0 complete callback ID */
HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID = 0x01U, /*!< CAN Tx Mailbox 1 complete callback ID */
HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID = 0x02U, /*!< CAN Tx Mailbox 2 complete callback ID */
HAL_CAN_TX_MAILBOX0_ABORT_CB_ID = 0x03U, /*!< CAN Tx Mailbox 0 abort callback ID */
HAL_CAN_TX_MAILBOX1_ABORT_CB_ID = 0x04U, /*!< CAN Tx Mailbox 1 abort callback ID */
HAL_CAN_TX_MAILBOX2_ABORT_CB_ID = 0x05U, /*!< CAN Tx Mailbox 2 abort callback ID */
HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID = 0x06U, /*!< CAN Rx FIFO 0 message pending callback ID */
HAL_CAN_RX_FIFO0_FULL_CB_ID = 0x07U, /*!< CAN Rx FIFO 0 full callback ID */
HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID = 0x08U, /*!< CAN Rx FIFO 1 message pending callback ID */
HAL_CAN_RX_FIFO1_FULL_CB_ID = 0x09U, /*!< CAN Rx FIFO 1 full callback ID */
HAL_CAN_SLEEP_CB_ID = 0x0AU, /*!< CAN Sleep callback ID */
HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID = 0x0BU, /*!< CAN Wake Up from Rx msg callback ID */
HAL_CAN_ERROR_CB_ID = 0x0CU, /*!< CAN Error callback ID */
HAL_CAN_MSPINIT_CB_ID = 0x0DU, /*!< CAN MspInit callback ID */
HAL_CAN_MSPDEINIT_CB_ID = 0x0EU, /*!< CAN MspDeInit callback ID */
} HAL_CAN_CallbackIDTypeDef;
/**
* @brief HAL CAN Callback pointer definition
*/
typedef void (*pCAN_CallbackTypeDef)(CAN_HandleTypeDef *hcan); /*!< pointer to a CAN callback function */
#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CAN_Exported_Constants CAN Exported Constants
* @{
*/
/** @defgroup CAN_Error_Code CAN Error Code
* @{
*/
#define HAL_CAN_ERROR_NONE (0x00000000U) /*!< No error */
#define HAL_CAN_ERROR_EWG (0x00000001U) /*!< Protocol Error Warning */
#define HAL_CAN_ERROR_EPV (0x00000002U) /*!< Error Passive */
#define HAL_CAN_ERROR_BOF (0x00000004U) /*!< Bus-off error */
#define HAL_CAN_ERROR_STF (0x00000008U) /*!< Stuff error */
#define HAL_CAN_ERROR_FOR (0x00000010U) /*!< Form error */
#define HAL_CAN_ERROR_ACK (0x00000020U) /*!< Acknowledgment error */
#define HAL_CAN_ERROR_BR (0x00000040U) /*!< Bit recessive error */
#define HAL_CAN_ERROR_BD (0x00000080U) /*!< Bit dominant error */
#define HAL_CAN_ERROR_CRC (0x00000100U) /*!< CRC error */
#define HAL_CAN_ERROR_RX_FOV0 (0x00000200U) /*!< Rx FIFO0 overrun error */
#define HAL_CAN_ERROR_RX_FOV1 (0x00000400U) /*!< Rx FIFO1 overrun error */
#define HAL_CAN_ERROR_TX_ALST0 (0x00000800U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
#define HAL_CAN_ERROR_TX_TERR0 (0x00001000U) /*!< TxMailbox 0 transmit failure due to transmit error */
#define HAL_CAN_ERROR_TX_ALST1 (0x00002000U) /*!< TxMailbox 1 transmit failure due to arbitration lost */
#define HAL_CAN_ERROR_TX_TERR1 (0x00004000U) /*!< TxMailbox 1 transmit failure due to transmit error */
#define HAL_CAN_ERROR_TX_ALST2 (0x00008000U) /*!< TxMailbox 2 transmit failure due to arbitration lost */
#define HAL_CAN_ERROR_TX_TERR2 (0x00010000U) /*!< TxMailbox 2 transmit failure due to transmit error */
#define HAL_CAN_ERROR_TIMEOUT (0x00020000U) /*!< Timeout error */
#define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U) /*!< Peripheral not initialized */
#define HAL_CAN_ERROR_NOT_READY (0x00080000U) /*!< Peripheral not ready */
#define HAL_CAN_ERROR_NOT_STARTED (0x00100000U) /*!< Peripheral not started */
#define HAL_CAN_ERROR_PARAM (0x00200000U) /*!< Parameter error */
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
#define HAL_CAN_ERROR_INVALID_CALLBACK (0x00400000U) /*!< Invalid Callback error */
#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
#define HAL_CAN_ERROR_INTERNAL (0x00800000U) /*!< Internal error */
/**
* @}
*/
/** @defgroup CAN_InitStatus CAN InitStatus
* @{
*/
#define CAN_INITSTATUS_FAILED (0x00000000U) /*!< CAN initialization failed */
#define CAN_INITSTATUS_SUCCESS (0x00000001U) /*!< CAN initialization OK */
/**
* @}
*/
/** @defgroup CAN_operating_mode CAN Operating Mode
* @{
*/
#define CAN_MODE_NORMAL (0x00000000U) /*!< Normal mode */
#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
/**
* @}
*/
/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
* @{
*/
#define CAN_SJW_1TQ (0x00000000U) /*!< 1 time quantum */
#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
/**
* @}
*/
/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
* @{
*/
#define CAN_BS1_1TQ (0x00000000U) /*!< 1 time quantum */
#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
/**
* @}
*/
/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
* @{
*/
#define CAN_BS2_1TQ (0x00000000U) /*!< 1 time quantum */
#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
/**
* @}
*/
/** @defgroup CAN_filter_mode CAN Filter Mode
* @{
*/
#define CAN_FILTERMODE_IDMASK (0x00000000U) /*!< Identifier mask mode */
#define CAN_FILTERMODE_IDLIST (0x00000001U) /*!< Identifier list mode */
/**
* @}
*/
/** @defgroup CAN_filter_scale CAN Filter Scale
* @{
*/
#define CAN_FILTERSCALE_16BIT (0x00000000U) /*!< Two 16-bit filters */
#define CAN_FILTERSCALE_32BIT (0x00000001U) /*!< One 32-bit filter */
/**
* @}
*/
/** @defgroup CAN_filter_activation CAN Filter Activation
* @{
*/
#define CAN_FILTER_DISABLE (0x00000000U) /*!< Disable filter */
#define CAN_FILTER_ENABLE (0x00000001U) /*!< Enable filter */
/**
* @}
*/
/** @defgroup CAN_filter_FIFO CAN Filter FIFO
* @{
*/
#define CAN_FILTER_FIFO0 (0x00000000U) /*!< Filter FIFO 0 assignment for filter x */
#define CAN_FILTER_FIFO1 (0x00000001U) /*!< Filter FIFO 1 assignment for filter x */
/**
* @}
*/
/** @defgroup CAN_identifier_type CAN Identifier Type
* @{
*/
#define CAN_ID_STD (0x00000000U) /*!< Standard Id */
#define CAN_ID_EXT (0x00000004U) /*!< Extended Id */
/**
* @}
*/
/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
* @{
*/
#define CAN_RTR_DATA (0x00000000U) /*!< Data frame */
#define CAN_RTR_REMOTE (0x00000002U) /*!< Remote frame */
/**
* @}
*/
/** @defgroup CAN_receive_FIFO_number CAN Receive FIFO Number
* @{
*/
#define CAN_RX_FIFO0 (0x00000000U) /*!< CAN receive FIFO 0 */
#define CAN_RX_FIFO1 (0x00000001U) /*!< CAN receive FIFO 1 */
/**
* @}
*/
/** @defgroup CAN_Tx_Mailboxes CAN Tx Mailboxes
* @{
*/
#define CAN_TX_MAILBOX0 (0x00000001U) /*!< Tx Mailbox 0 */
#define CAN_TX_MAILBOX1 (0x00000002U) /*!< Tx Mailbox 1 */
#define CAN_TX_MAILBOX2 (0x00000004U) /*!< Tx Mailbox 2 */
/**
* @}
*/
/** @defgroup CAN_flags CAN Flags
* @{
*/
/* Transmit Flags */
#define CAN_FLAG_RQCP0 (0x00000500U) /*!< Request complete MailBox 0 flag */
#define CAN_FLAG_TXOK0 (0x00000501U) /*!< Transmission OK MailBox 0 flag */
#define CAN_FLAG_ALST0 (0x00000502U) /*!< Arbitration Lost MailBox 0 flag */
#define CAN_FLAG_TERR0 (0x00000503U) /*!< Transmission error MailBox 0 flag */
#define CAN_FLAG_RQCP1 (0x00000508U) /*!< Request complete MailBox1 flag */
#define CAN_FLAG_TXOK1 (0x00000509U) /*!< Transmission OK MailBox 1 flag */
#define CAN_FLAG_ALST1 (0x0000050AU) /*!< Arbitration Lost MailBox 1 flag */
#define CAN_FLAG_TERR1 (0x0000050BU) /*!< Transmission error MailBox 1 flag */
#define CAN_FLAG_RQCP2 (0x00000510U) /*!< Request complete MailBox2 flag */
#define CAN_FLAG_TXOK2 (0x00000511U) /*!< Transmission OK MailBox 2 flag */
#define CAN_FLAG_ALST2 (0x00000512U) /*!< Arbitration Lost MailBox 2 flag */
#define CAN_FLAG_TERR2 (0x00000513U) /*!< Transmission error MailBox 2 flag */
#define CAN_FLAG_TME0 (0x0000051AU) /*!< Transmit mailbox 0 empty flag */
#define CAN_FLAG_TME1 (0x0000051BU) /*!< Transmit mailbox 1 empty flag */
#define CAN_FLAG_TME2 (0x0000051CU) /*!< Transmit mailbox 2 empty flag */
#define CAN_FLAG_LOW0 (0x0000051DU) /*!< Lowest priority mailbox 0 flag */
#define CAN_FLAG_LOW1 (0x0000051EU) /*!< Lowest priority mailbox 1 flag */
#define CAN_FLAG_LOW2 (0x0000051FU) /*!< Lowest priority mailbox 2 flag */
/* Receive Flags */
#define CAN_FLAG_FF0 (0x00000203U) /*!< RX FIFO 0 Full flag */
#define CAN_FLAG_FOV0 (0x00000204U) /*!< RX FIFO 0 Overrun flag */
#define CAN_FLAG_FF1 (0x00000403U) /*!< RX FIFO 1 Full flag */
#define CAN_FLAG_FOV1 (0x00000404U) /*!< RX FIFO 1 Overrun flag */
/* Operating Mode Flags */
#define CAN_FLAG_INAK (0x00000100U) /*!< Initialization acknowledge flag */
#define CAN_FLAG_SLAK (0x00000101U) /*!< Sleep acknowledge flag */
#define CAN_FLAG_ERRI (0x00000102U) /*!< Error flag */
#define CAN_FLAG_WKU (0x00000103U) /*!< Wake up interrupt flag */
#define CAN_FLAG_SLAKI (0x00000104U) /*!< Sleep acknowledge interrupt flag */
/* Error Flags */
#define CAN_FLAG_EWG (0x00000300U) /*!< Error warning flag */
#define CAN_FLAG_EPV (0x00000301U) /*!< Error passive flag */
#define CAN_FLAG_BOF (0x00000302U) /*!< Bus-Off flag */
/**
* @}
*/
/** @defgroup CAN_Interrupts CAN Interrupts
* @{
*/
/* Transmit Interrupt */
#define CAN_IT_TX_MAILBOX_EMPTY ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
/* Receive Interrupts */
#define CAN_IT_RX_FIFO0_MSG_PENDING ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
#define CAN_IT_RX_FIFO0_FULL ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
#define CAN_IT_RX_FIFO0_OVERRUN ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
#define CAN_IT_RX_FIFO1_MSG_PENDING ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
#define CAN_IT_RX_FIFO1_FULL ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
#define CAN_IT_RX_FIFO1_OVERRUN ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
/* Operating Mode Interrupts */
#define CAN_IT_WAKEUP ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
#define CAN_IT_SLEEP_ACK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
/* Error Interrupts */
#define CAN_IT_ERROR_WARNING ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
#define CAN_IT_ERROR_PASSIVE ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
#define CAN_IT_BUSOFF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
#define CAN_IT_LAST_ERROR_CODE ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
#define CAN_IT_ERROR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup CAN_Exported_Macros CAN Exported Macros
* @{
*/
/** @brief Reset CAN handle state
* @param __HANDLE__ CAN handle.
* @retval None
*/
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->State = HAL_CAN_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
#endif /*USE_HAL_CAN_REGISTER_CALLBACKS */
/**
* @brief Enable the specified CAN interrupts.
* @param __HANDLE__ CAN handle.
* @param __INTERRUPT__ CAN Interrupt sources to enable.
* This parameter can be any combination of @arg CAN_Interrupts
* @retval None
*/
#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
/**
* @brief Disable the specified CAN interrupts.
* @param __HANDLE__ CAN handle.
* @param __INTERRUPT__ CAN Interrupt sources to disable.
* This parameter can be any combination of @arg CAN_Interrupts
* @retval None
*/
#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
/** @brief Check if the specified CAN interrupt source is enabled or disabled.
* @param __HANDLE__ specifies the CAN Handle.
* @param __INTERRUPT__ specifies the CAN interrupt source to check.
* This parameter can be a value of @arg CAN_Interrupts
* @retval The state of __IT__ (TRUE or FALSE).
*/
#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) & (__INTERRUPT__))
/** @brief Check whether the specified CAN flag is set or not.
* @param __HANDLE__ specifies the CAN Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of @arg CAN_flags
* @retval The state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 3U)? ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
/** @brief Clear the specified CAN pending flag.
* @param __HANDLE__ specifies the CAN Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg CAN_FLAG_RQCP0: Request complete MailBox 0 Flag
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox 0 Flag
* @arg CAN_FLAG_ALST0: Arbitration Lost MailBox 0 Flag
* @arg CAN_FLAG_TERR0: Transmission error MailBox 0 Flag
* @arg CAN_FLAG_RQCP1: Request complete MailBox 1 Flag
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox 1 Flag
* @arg CAN_FLAG_ALST1: Arbitration Lost MailBox 1 Flag
* @arg CAN_FLAG_TERR1: Transmission error MailBox 1 Flag
* @arg CAN_FLAG_RQCP2: Request complete MailBox 2 Flag
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox 2 Flag
* @arg CAN_FLAG_ALST2: Arbitration Lost MailBox 2 Flag
* @arg CAN_FLAG_TERR2: Transmission error MailBox 2 Flag
* @arg CAN_FLAG_FF0: RX FIFO 0 Full Flag
* @arg CAN_FLAG_FOV0: RX FIFO 0 Overrun Flag
* @arg CAN_FLAG_FF1: RX FIFO 1 Full Flag
* @arg CAN_FLAG_FOV1: RX FIFO 1 Overrun Flag
* @arg CAN_FLAG_WKUI: Wake up Interrupt Flag
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Interrupt Flag
* @retval None
*/
#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
(((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup CAN_Exported_Functions CAN Exported Functions
* @{
*/
/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
* @{
*/
/* Initialization and de-initialization functions *****************************/
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef *hcan);
void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan);
void HAL_CAN_MspDeInit(CAN_HandleTypeDef *hcan);
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
/* Callbacks Register/UnRegister functions ***********************************/
HAL_StatusTypeDef HAL_CAN_RegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID, void (* pCallback)(CAN_HandleTypeDef *_hcan));
HAL_StatusTypeDef HAL_CAN_UnRegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID);
#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
/**
* @}
*/
/** @addtogroup CAN_Exported_Functions_Group2 Configuration functions
* @brief Configuration functions
* @{
*/
/* Configuration functions ****************************************************/
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDef *sFilterConfig);
/**
* @}
*/
/** @addtogroup CAN_Exported_Functions_Group3 Control functions
* @brief Control functions
* @{
*/
/* Control functions **********************************************************/
HAL_StatusTypeDef HAL_CAN_Start(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_Stop(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_RequestSleep(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
uint32_t HAL_CAN_IsSleepActive(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_AddTxMessage(CAN_HandleTypeDef *hcan, CAN_TxHeaderTypeDef *pHeader, uint8_t aData[], uint32_t *pTxMailbox);
HAL_StatusTypeDef HAL_CAN_AbortTxRequest(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
uint32_t HAL_CAN_GetTxMailboxesFreeLevel(CAN_HandleTypeDef *hcan);
uint32_t HAL_CAN_IsTxMessagePending(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
uint32_t HAL_CAN_GetTxTimestamp(CAN_HandleTypeDef *hcan, uint32_t TxMailbox);
HAL_StatusTypeDef HAL_CAN_GetRxMessage(CAN_HandleTypeDef *hcan, uint32_t RxFifo, CAN_RxHeaderTypeDef *pHeader, uint8_t aData[]);
uint32_t HAL_CAN_GetRxFifoFillLevel(CAN_HandleTypeDef *hcan, uint32_t RxFifo);
/**
* @}
*/
/** @addtogroup CAN_Exported_Functions_Group4 Interrupts management
* @brief Interrupts management
* @{
*/
/* Interrupts management ******************************************************/
HAL_StatusTypeDef HAL_CAN_ActivateNotification(CAN_HandleTypeDef *hcan, uint32_t ActiveITs);
HAL_StatusTypeDef HAL_CAN_DeactivateNotification(CAN_HandleTypeDef *hcan, uint32_t InactiveITs);
void HAL_CAN_IRQHandler(CAN_HandleTypeDef *hcan);
/**
* @}
*/
/** @addtogroup CAN_Exported_Functions_Group5 Callback functions
* @brief Callback functions
* @{
*/
/* Callbacks functions ********************************************************/
void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_TxMailbox1CompleteCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_TxMailbox2CompleteCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_TxMailbox0AbortCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_TxMailbox1AbortCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_TxMailbox2AbortCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_RxFifo0FullCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_RxFifo1FullCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_SleepCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_WakeUpFromRxMsgCallback(CAN_HandleTypeDef *hcan);
void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
/**
* @}
*/
/** @addtogroup CAN_Exported_Functions_Group6 Peripheral State and Error functions
* @brief CAN Peripheral State functions
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef *hcan);
uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/** @defgroup CAN_Private_Types CAN Private Types
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup CAN_Private_Variables CAN Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup CAN_Private_Constants CAN Private Constants
* @{
*/
#define CAN_FLAG_MASK (0x000000FFU)
/**
* @}
*/
/* Private Macros -----------------------------------------------------------*/
/** @defgroup CAN_Private_Macros CAN Private Macros
* @{
*/
#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
((MODE) == CAN_MODE_LOOPBACK)|| \
((MODE) == CAN_MODE_SILENT) || \
((MODE) == CAN_MODE_SILENT_LOOPBACK))
#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ) || \
((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
#define IS_CAN_BS1(BS1) (((BS1) == CAN_BS1_1TQ) || ((BS1) == CAN_BS1_2TQ) || \
((BS1) == CAN_BS1_3TQ) || ((BS1) == CAN_BS1_4TQ) || \
((BS1) == CAN_BS1_5TQ) || ((BS1) == CAN_BS1_6TQ) || \
((BS1) == CAN_BS1_7TQ) || ((BS1) == CAN_BS1_8TQ) || \
((BS1) == CAN_BS1_9TQ) || ((BS1) == CAN_BS1_10TQ)|| \
((BS1) == CAN_BS1_11TQ)|| ((BS1) == CAN_BS1_12TQ)|| \
((BS1) == CAN_BS1_13TQ)|| ((BS1) == CAN_BS1_14TQ)|| \
((BS1) == CAN_BS1_15TQ)|| ((BS1) == CAN_BS1_16TQ))
#define IS_CAN_BS2(BS2) (((BS2) == CAN_BS2_1TQ) || ((BS2) == CAN_BS2_2TQ) || \
((BS2) == CAN_BS2_3TQ) || ((BS2) == CAN_BS2_4TQ) || \
((BS2) == CAN_BS2_5TQ) || ((BS2) == CAN_BS2_6TQ) || \
((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ))
#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
#define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU)
#if defined(CAN2)
#define IS_CAN_FILTER_BANK_DUAL(BANK) ((BANK) <= 27U)
#endif
#define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U)
#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
((MODE) == CAN_FILTERMODE_IDLIST))
#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
((SCALE) == CAN_FILTERSCALE_32BIT))
#define IS_CAN_FILTER_ACTIVATION(ACTIVATION) (((ACTIVATION) == CAN_FILTER_DISABLE) || \
((ACTIVATION) == CAN_FILTER_ENABLE))
#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
((FIFO) == CAN_FILTER_FIFO1))
#define IS_CAN_TX_MAILBOX(TRANSMITMAILBOX) (((TRANSMITMAILBOX) == CAN_TX_MAILBOX0 ) || \
((TRANSMITMAILBOX) == CAN_TX_MAILBOX1 ) || \
((TRANSMITMAILBOX) == CAN_TX_MAILBOX2 ))
#define IS_CAN_TX_MAILBOX_LIST(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= (CAN_TX_MAILBOX0 | CAN_TX_MAILBOX1 | CAN_TX_MAILBOX2))
#define IS_CAN_STDID(STDID) ((STDID) <= 0x7FFU)
#define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU)
#define IS_CAN_DLC(DLC) ((DLC) <= 8U)
#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
((IDTYPE) == CAN_ID_EXT))
#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
#define IS_CAN_RX_FIFO(FIFO) (((FIFO) == CAN_RX_FIFO0) || ((FIFO) == CAN_RX_FIFO1))
#define IS_CAN_IT(IT) ((IT) <= (CAN_IT_TX_MAILBOX_EMPTY | CAN_IT_RX_FIFO0_MSG_PENDING | \
CAN_IT_RX_FIFO0_FULL | CAN_IT_RX_FIFO0_OVERRUN | \
CAN_IT_RX_FIFO1_MSG_PENDING | CAN_IT_RX_FIFO1_FULL | \
CAN_IT_RX_FIFO1_OVERRUN | CAN_IT_WAKEUP | \
CAN_IT_SLEEP_ACK | CAN_IT_ERROR_WARNING | \
CAN_IT_ERROR_PASSIVE | CAN_IT_BUSOFF | \
CAN_IT_LAST_ERROR_CODE | CAN_IT_ERROR))
/**
* @}
*/
/* End of private macros -----------------------------------------------------*/
/**
* @}
*/
#endif /* CAN1 */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F1xx_HAL_CAN_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

410
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h Normal file
View File

@@ -0,0 +1,410 @@
/**
******************************************************************************
* @file stm32f1xx_hal_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_CORTEX_H
#define __STM32F1xx_HAL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup CORTEX
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
* @{
*/
#if (__MPU_PRESENT == 1U)
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
* @brief MPU Region initialization structure
* @{
*/
typedef struct
{
uint8_t Enable; /*!< Specifies the status of the region.
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
uint8_t Number; /*!< Specifies the number of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
uint8_t Size; /*!< Specifies the size of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint8_t TypeExtField; /*!< Specifies the TEX field level.
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
uint8_t AccessPermission; /*!< Specifies the region access permission type.
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
uint8_t DisableExec; /*!< Specifies the instruction access status.
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
}MPU_Region_InitTypeDef;
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
* @{
*/
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
4 bits for subpriority */
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
3 bits for subpriority */
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
2 bits for subpriority */
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
1 bits for subpriority */
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
0 bits for subpriority */
/**
* @}
*/
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
* @{
*/
#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U
#define SYSTICK_CLKSOURCE_HCLK 0x00000004U
/**
* @}
*/
#if (__MPU_PRESENT == 1)
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
* @{
*/
#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U
#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk
#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk
#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
* @{
*/
#define MPU_REGION_ENABLE ((uint8_t)0x01)
#define MPU_REGION_DISABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
* @{
*/
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
* @{
*/
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
* @{
*/
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
* @{
*/
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
* @{
*/
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
* @{
*/
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
* @{
*/
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
* @{
*/
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported Macros -----------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup CORTEX_Exported_Functions
* @{
*/
/** @addtogroup CORTEX_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
void HAL_NVIC_SystemReset(void);
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
/**
* @}
*/
/** @addtogroup CORTEX_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ***********************************************/
uint32_t HAL_NVIC_GetPriorityGrouping(void);
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
void HAL_SYSTICK_IRQHandler(void);
void HAL_SYSTICK_Callback(void);
#if (__MPU_PRESENT == 1U)
void HAL_MPU_Enable(uint32_t MPU_Control);
void HAL_MPU_Disable(void);
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
* @{
*/
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
((GROUP) == NVIC_PRIORITYGROUP_1) || \
((GROUP) == NVIC_PRIORITYGROUP_2) || \
((GROUP) == NVIC_PRIORITYGROUP_3) || \
((GROUP) == NVIC_PRIORITYGROUP_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
#if (__MPU_PRESENT == 1U)
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
((STATE) == MPU_REGION_DISABLE))
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
((TYPE) == MPU_TEX_LEVEL1) || \
((TYPE) == MPU_TEX_LEVEL2))
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RW) || \
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
((TYPE) == MPU_REGION_FULL_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RO) || \
((TYPE) == MPU_REGION_PRIV_RO_URO))
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
((NUMBER) == MPU_REGION_NUMBER1) || \
((NUMBER) == MPU_REGION_NUMBER2) || \
((NUMBER) == MPU_REGION_NUMBER3) || \
((NUMBER) == MPU_REGION_NUMBER4) || \
((NUMBER) == MPU_REGION_NUMBER5) || \
((NUMBER) == MPU_REGION_NUMBER6) || \
((NUMBER) == MPU_REGION_NUMBER7))
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
((SIZE) == MPU_REGION_SIZE_64B) || \
((SIZE) == MPU_REGION_SIZE_128B) || \
((SIZE) == MPU_REGION_SIZE_256B) || \
((SIZE) == MPU_REGION_SIZE_512B) || \
((SIZE) == MPU_REGION_SIZE_1KB) || \
((SIZE) == MPU_REGION_SIZE_2KB) || \
((SIZE) == MPU_REGION_SIZE_4KB) || \
((SIZE) == MPU_REGION_SIZE_8KB) || \
((SIZE) == MPU_REGION_SIZE_16KB) || \
((SIZE) == MPU_REGION_SIZE_32KB) || \
((SIZE) == MPU_REGION_SIZE_64KB) || \
((SIZE) == MPU_REGION_SIZE_128KB) || \
((SIZE) == MPU_REGION_SIZE_256KB) || \
((SIZE) == MPU_REGION_SIZE_512KB) || \
((SIZE) == MPU_REGION_SIZE_1MB) || \
((SIZE) == MPU_REGION_SIZE_2MB) || \
((SIZE) == MPU_REGION_SIZE_4MB) || \
((SIZE) == MPU_REGION_SIZE_8MB) || \
((SIZE) == MPU_REGION_SIZE_16MB) || \
((SIZE) == MPU_REGION_SIZE_32MB) || \
((SIZE) == MPU_REGION_SIZE_64MB) || \
((SIZE) == MPU_REGION_SIZE_128MB) || \
((SIZE) == MPU_REGION_SIZE_256MB) || \
((SIZE) == MPU_REGION_SIZE_512MB) || \
((SIZE) == MPU_REGION_SIZE_1GB) || \
((SIZE) == MPU_REGION_SIZE_2GB) || \
((SIZE) == MPU_REGION_SIZE_4GB))
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_CORTEX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

210
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h Normal file
View File

@@ -0,0 +1,210 @@
/**
******************************************************************************
* @file stm32f1xx_hal_def.h
* @author MCD Application Team
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_DEF
#define __STM32F1xx_HAL_DEF
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
#include "Legacy/stm32_hal_legacy.h"
#include <stddef.h>
/* Exported types ------------------------------------------------------------*/
/**
* @brief HAL Status structures definition
*/
typedef enum
{
HAL_OK = 0x00U,
HAL_ERROR = 0x01U,
HAL_BUSY = 0x02U,
HAL_TIMEOUT = 0x03U
} HAL_StatusTypeDef;
/**
* @brief HAL Lock structures definition
*/
typedef enum
{
HAL_UNLOCKED = 0x00U,
HAL_LOCKED = 0x01U
} HAL_LockTypeDef;
/* Exported macro ------------------------------------------------------------*/
#define HAL_MAX_DELAY 0xFFFFFFFFU
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != 0U)
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
do{ \
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
(__DMA_HANDLE__).Parent = (__HANDLE__); \
} while(0U)
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
/** @brief Reset the Handle's State field.
* @param __HANDLE__ specifies the Peripheral Handle.
* @note This macro can be used for the following purpose:
* - When the Handle is declared as local variable; before passing it as parameter
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
* to set to 0 the Handle's "State" field.
* Otherwise, "State" field may have any random value and the first time the function
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
* (i.e. HAL_PPP_MspInit() will not be executed).
* - When there is a need to reconfigure the low level hardware: instead of calling
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
* @retval None
*/
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
#if (USE_RTOS == 1U)
/* Reserved for future use */
#error "USE_RTOS should be 0 in the current HAL release"
#else
#define __HAL_LOCK(__HANDLE__) \
do{ \
if((__HANDLE__)->Lock == HAL_LOCKED) \
{ \
return HAL_BUSY; \
} \
else \
{ \
(__HANDLE__)->Lock = HAL_LOCKED; \
} \
}while (0U)
#define __HAL_UNLOCK(__HANDLE__) \
do{ \
(__HANDLE__)->Lock = HAL_UNLOCKED; \
}while (0U)
#endif /* USE_RTOS */
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
#ifndef __weak
#define __weak __attribute__((weak))
#endif
#ifndef __packed
#define __packed __attribute__((packed))
#endif
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#ifndef __packed
#define __packed __attribute__((__packed__))
#endif /* __packed */
#endif /* __GNUC__ */
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
#endif
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4)))
#endif
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4)))
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
#endif /* __ALIGN_BEGIN */
#else
#ifndef __ALIGN_END
#define __ALIGN_END
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#if defined (__CC_ARM) /* ARM Compiler V5*/
#define __ALIGN_BEGIN __align(4)
#elif defined (__ICCARM__) /* IAR Compiler */
#define __ALIGN_BEGIN
#endif /* __CC_ARM */
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
/**
* @brief __RAM_FUNC definition
*/
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
/* ARM Compiler V4/V5 and V6
--------------------------
RAM functions are defined using the toolchain options.
Functions that are executed in RAM should reside in a separate source module.
Using the 'Options for File' dialog you can simply change the 'Code / Const'
area of a module to a memory space in physical RAM.
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
dialog.
*/
#define __RAM_FUNC
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
RAM functions are defined using a specific toolchain keyword "__ramfunc".
*/
#define __RAM_FUNC __ramfunc
#elif defined ( __GNUC__ )
/* GNU Compiler
------------
RAM functions are defined using a specific toolchain attribute
"__attribute__((section(".RamFunc")))".
*/
#define __RAM_FUNC __attribute__((section(".RamFunc")))
#endif
/**
* @brief __NOINLINE definition
*/
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ )
/* ARM V4/V5 and V6 & GNU Compiler
-------------------------------
*/
#define __NOINLINE __attribute__ ( (noinline) )
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
*/
#define __NOINLINE _Pragma("optimize = no_inline")
#endif
#ifdef __cplusplus
}
#endif
#endif /* ___STM32F1xx_HAL_DEF */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

457
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h Normal file
View File

@@ -0,0 +1,457 @@
/**
******************************************************************************
* @file stm32f1xx_hal_dma.h
* @author MCD Application Team
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_DMA_H
#define __STM32F1xx_HAL_DMA_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup DMA
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DMA_Exported_Types DMA Exported Types
* @{
*/
/**
* @brief DMA Configuration Structure definition
*/
typedef struct
{
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
from memory to memory or from peripheral to memory.
This parameter can be a value of @ref DMA_Data_transfer_direction */
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
This parameter can be a value of @ref DMA_Memory_incremented_mode */
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
This parameter can be a value of @ref DMA_Peripheral_data_size */
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
This parameter can be a value of @ref DMA_Memory_data_size */
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
This parameter can be a value of @ref DMA_mode
@note The circular buffer mode cannot be used if the memory-to-memory
data transfer is configured on the selected Channel */
uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
This parameter can be a value of @ref DMA_Priority_level */
} DMA_InitTypeDef;
/**
* @brief HAL DMA State structures definition
*/
typedef enum
{
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */
}HAL_DMA_StateTypeDef;
/**
* @brief HAL DMA Error Code structure definition
*/
typedef enum
{
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
}HAL_DMA_LevelCompleteTypeDef;
/**
* @brief HAL DMA Callback ID structure definition
*/
typedef enum
{
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */
HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */
HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */
HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */
}HAL_DMA_CallbackIDTypeDef;
/**
* @brief DMA handle Structure definition
*/
typedef struct __DMA_HandleTypeDef
{
DMA_Channel_TypeDef *Instance; /*!< Register base address */
DMA_InitTypeDef Init; /*!< DMA communication parameters */
HAL_LockTypeDef Lock; /*!< DMA locking object */
HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
void *Parent; /*!< Parent object state */
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */
__IO uint32_t ErrorCode; /*!< DMA Error code */
DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
uint32_t ChannelIndex; /*!< DMA Channel Index */
} DMA_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA_Exported_Constants DMA Exported Constants
* @{
*/
/** @defgroup DMA_Error_Code DMA Error Code
* @{
*/
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< no ongoing transfer */
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
/**
* @}
*/
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
* @{
*/
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */
/**
* @}
*/
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
* @{
*/
#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */
/**
* @}
*/
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
* @{
*/
#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */
/**
* @}
*/
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
* @{
*/
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */
/**
* @}
*/
/** @defgroup DMA_Memory_data_size DMA Memory data size
* @{
*/
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */
/**
* @}
*/
/** @defgroup DMA_mode DMA mode
* @{
*/
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */
/**
* @}
*/
/** @defgroup DMA_Priority_level DMA Priority level
* @{
*/
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
/**
* @}
*/
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
* @{
*/
#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
/**
* @}
*/
/** @defgroup DMA_flag_definitions DMA flag definitions
* @{
*/
#define DMA_FLAG_GL1 0x00000001U
#define DMA_FLAG_TC1 0x00000002U
#define DMA_FLAG_HT1 0x00000004U
#define DMA_FLAG_TE1 0x00000008U
#define DMA_FLAG_GL2 0x00000010U
#define DMA_FLAG_TC2 0x00000020U
#define DMA_FLAG_HT2 0x00000040U
#define DMA_FLAG_TE2 0x00000080U
#define DMA_FLAG_GL3 0x00000100U
#define DMA_FLAG_TC3 0x00000200U
#define DMA_FLAG_HT3 0x00000400U
#define DMA_FLAG_TE3 0x00000800U
#define DMA_FLAG_GL4 0x00001000U
#define DMA_FLAG_TC4 0x00002000U
#define DMA_FLAG_HT4 0x00004000U
#define DMA_FLAG_TE4 0x00008000U
#define DMA_FLAG_GL5 0x00010000U
#define DMA_FLAG_TC5 0x00020000U
#define DMA_FLAG_HT5 0x00040000U
#define DMA_FLAG_TE5 0x00080000U
#define DMA_FLAG_GL6 0x00100000U
#define DMA_FLAG_TC6 0x00200000U
#define DMA_FLAG_HT6 0x00400000U
#define DMA_FLAG_TE6 0x00800000U
#define DMA_FLAG_GL7 0x01000000U
#define DMA_FLAG_TC7 0x02000000U
#define DMA_FLAG_HT7 0x04000000U
#define DMA_FLAG_TE7 0x08000000U
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup DMA_Exported_Macros DMA Exported Macros
* @{
*/
/** @brief Reset DMA handle state.
* @param __HANDLE__: DMA handle
* @retval None
*/
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
/**
* @brief Enable the specified DMA Channel.
* @param __HANDLE__: DMA handle
* @retval None
*/
#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
/**
* @brief Disable the specified DMA Channel.
* @param __HANDLE__: DMA handle
* @retval None
*/
#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
/* Interrupt & Flag management */
/**
* @brief Enables the specified DMA Channel interrupts.
* @param __HANDLE__: DMA handle
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask
* @arg DMA_IT_HT: Half transfer complete interrupt mask
* @arg DMA_IT_TE: Transfer error interrupt mask
* @retval None
*/
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__)))
/**
* @brief Disable the specified DMA Channel interrupts.
* @param __HANDLE__: DMA handle
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask
* @arg DMA_IT_HT: Half transfer complete interrupt mask
* @arg DMA_IT_TE: Transfer error interrupt mask
* @retval None
*/
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__)))
/**
* @brief Check whether the specified DMA Channel interrupt is enabled or not.
* @param __HANDLE__: DMA handle
* @param __INTERRUPT__: specifies the DMA interrupt source to check.
* This parameter can be one of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask
* @arg DMA_IT_HT: Half transfer complete interrupt mask
* @arg DMA_IT_TE: Transfer error interrupt mask
* @retval The state of DMA_IT (SET or RESET).
*/
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/**
* @brief Return the number of remaining data units in the current DMA Channel transfer.
* @param __HANDLE__: DMA handle
* @retval The number of remaining data units in the current DMA Channel transfer.
*/
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
/**
* @}
*/
/* Include DMA HAL Extension module */
#include "stm32f1xx_hal_dma_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMA_Exported_Functions
* @{
*/
/** @addtogroup DMA_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
/**
* @}
*/
/** @addtogroup DMA_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
/**
* @}
*/
/** @addtogroup DMA_Exported_Functions_Group3
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DMA_Private_Macros DMA Private Macros
* @{
*/
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
((STATE) == DMA_PINC_DISABLE))
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
((STATE) == DMA_MINC_DISABLE))
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
((SIZE) == DMA_PDATAALIGN_WORD))
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
((SIZE) == DMA_MDATAALIGN_WORD ))
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
((MODE) == DMA_CIRCULAR))
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
((PRIORITY) == DMA_PRIORITY_HIGH) || \
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_DMA_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

277
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h Normal file
View File

@@ -0,0 +1,277 @@
/**
******************************************************************************
* @file stm32f1xx_hal_dma_ex.h
* @author MCD Application Team
* @brief Header file of DMA HAL extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_DMA_EX_H
#define __STM32F1xx_HAL_DMA_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @defgroup DMAEx DMAEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros
* @{
*/
/* Interrupt & Flag management */
#if defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || \
defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
/** @defgroup DMAEx_High_density_XL_density_Product_devices DMAEx High density and XL density product devices
* @{
*/
/**
* @brief Returns the current DMA Channel transfer complete flag.
* @param __HANDLE__: DMA handle
* @retval The specified transfer complete flag index.
*/
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
DMA_FLAG_TC5)
/**
* @brief Returns the current DMA Channel half transfer complete flag.
* @param __HANDLE__: DMA handle
* @retval The specified half transfer complete flag index.
*/
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
DMA_FLAG_HT5)
/**
* @brief Returns the current DMA Channel transfer error flag.
* @param __HANDLE__: DMA handle
* @retval The specified transfer error flag index.
*/
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
DMA_FLAG_TE5)
/**
* @brief Return the current DMA Channel Global interrupt flag.
* @param __HANDLE__: DMA handle
* @retval The specified transfer error flag index.
*/
#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\
DMA_FLAG_GL5)
/**
* @brief Get the DMA Channel pending flags.
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCx: Transfer complete flag
* @arg DMA_FLAG_HTx: Half transfer complete flag
* @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
(DMA1->ISR & (__FLAG__)))
/**
* @brief Clears the DMA Channel pending flags.
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCx: Transfer complete flag
* @arg DMA_FLAG_HTx: Half transfer complete flag
* @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
* @retval None
*/
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
(DMA1->IFCR = (__FLAG__)))
/**
* @}
*/
#else
/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices
* @{
*/
/**
* @brief Returns the current DMA Channel transfer complete flag.
* @param __HANDLE__: DMA handle
* @retval The specified transfer complete flag index.
*/
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
DMA_FLAG_TC7)
/**
* @brief Return the current DMA Channel half transfer complete flag.
* @param __HANDLE__: DMA handle
* @retval The specified half transfer complete flag index.
*/
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
DMA_FLAG_HT7)
/**
* @brief Return the current DMA Channel transfer error flag.
* @param __HANDLE__: DMA handle
* @retval The specified transfer error flag index.
*/
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
DMA_FLAG_TE7)
/**
* @brief Return the current DMA Channel Global interrupt flag.
* @param __HANDLE__: DMA handle
* @retval The specified transfer error flag index.
*/
#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
DMA_FLAG_GL7)
/**
* @brief Get the DMA Channel pending flags.
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCx: Transfer complete flag
* @arg DMA_FLAG_HTx: Half transfer complete flag
* @arg DMA_FLAG_TEx: Transfer error flag
* @arg DMA_FLAG_GLx: Global interrupt flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
/**
* @brief Clear the DMA Channel pending flags.
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DMA_FLAG_TCx: Transfer complete flag
* @arg DMA_FLAG_HTx: Half transfer complete flag
* @arg DMA_FLAG_TEx: Transfer error flag
* @arg DMA_FLAG_GLx: Global interrupt flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval None
*/
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
/**
* @}
*/
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || */
/* STM32F103xG || STM32F105xC || STM32F107xC */
#endif /* __STM32F1xx_HAL_DMA_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

320
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h Normal file
View File

@@ -0,0 +1,320 @@
/**
******************************************************************************
* @file stm32f1xx_hal_exti.h
* @author MCD Application Team
* @brief Header file of EXTI HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F1xx_HAL_EXTI_H
#define STM32F1xx_HAL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @defgroup EXTI EXTI
* @brief EXTI HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup EXTI_Exported_Types EXTI Exported Types
* @{
*/
/**
* @brief HAL EXTI common Callback ID enumeration definition
*/
typedef enum
{
HAL_EXTI_COMMON_CB_ID = 0x00U
} EXTI_CallbackIDTypeDef;
/**
* @brief EXTI Handle structure definition
*/
typedef struct
{
uint32_t Line; /*!< Exti line number */
void (* PendingCallback)(void); /*!< Exti pending callback */
} EXTI_HandleTypeDef;
/**
* @brief EXTI Configuration structure definition
*/
typedef struct
{
uint32_t Line; /*!< The Exti line to be configured. This parameter
can be a value of @ref EXTI_Line */
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
This parameter can be a combination of @ref EXTI_Mode */
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
can be a value of @ref EXTI_Trigger */
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
This parameter is only possible for line 0 to 15. It
can be a value of @ref EXTI_GPIOSel */
} EXTI_ConfigTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_Line EXTI Line
* @{
*/
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
#if defined(EXTI_IMR_IM18)
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB Wakeup from suspend event */
#endif /* EXTI_IMR_IM18 */
#if defined(EXTI_IMR_IM19)
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
#endif /* EXTI_IMR_IM19 */
/**
* @}
*/
/** @defgroup EXTI_Mode EXTI Mode
* @{
*/
#define EXTI_MODE_NONE 0x00000000u
#define EXTI_MODE_INTERRUPT 0x00000001u
#define EXTI_MODE_EVENT 0x00000002u
/**
* @}
*/
/** @defgroup EXTI_Trigger EXTI Trigger
* @{
*/
#define EXTI_TRIGGER_NONE 0x00000000u
#define EXTI_TRIGGER_RISING 0x00000001u
#define EXTI_TRIGGER_FALLING 0x00000002u
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
/**
* @}
*/
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
* @brief
* @{
*/
#define EXTI_GPIOA 0x00000000u
#define EXTI_GPIOB 0x00000001u
#define EXTI_GPIOC 0x00000002u
#define EXTI_GPIOD 0x00000003u
#if defined (GPIOE)
#define EXTI_GPIOE 0x00000004u
#endif /* GPIOE */
#if defined (GPIOF)
#define EXTI_GPIOF 0x00000005u
#endif /* GPIOF */
#if defined (GPIOG)
#define EXTI_GPIOG 0x00000006u
#endif /* GPIOG */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
* @{
*/
/**
* @}
*/
/* Private constants --------------------------------------------------------*/
/** @defgroup EXTI_Private_Constants EXTI Private Constants
* @{
*/
/**
* @brief EXTI Line property definition
*/
#define EXTI_PROPERTY_SHIFT 24u
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
/**
* @brief EXTI bit usage
*/
#define EXTI_PIN_MASK 0x0000001Fu
/**
* @brief EXTI Mask for interrupt & event mode
*/
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
/**
* @brief EXTI Mask for trigger possibilities
*/
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
/**
* @brief EXTI Line number
*/
#if defined(EXTI_IMR_IM19)
#define EXTI_LINE_NB 20UL
#elif defined(EXTI_IMR_IM18)
#define EXTI_LINE_NB 19UL
#else /* EXTI_IMR_IM17 */
#define EXTI_LINE_NB 18UL
#endif /* EXTI_IMR_IM19 */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup EXTI_Private_Macros EXTI Private Macros
* @{
*/
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
(((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
(((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
#if defined (GPIOG)
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE) || \
((__PORT__) == EXTI_GPIOF) || \
((__PORT__) == EXTI_GPIOG))
#elif defined (GPIOF)
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE) || \
((__PORT__) == EXTI_GPIOF))
#elif defined (GPIOE)
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE))
#else
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD))
#endif /* GPIOG */
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
* @brief EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
* @brief Configuration functions
* @{
*/
/* Configuration functions ****************************************************/
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
/**
* @}
*/
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
* @{
*/
/* IO operation functions *****************************************************/
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F1xx_HAL_EXTI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

328
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h Normal file
View File

@@ -0,0 +1,328 @@
/**
******************************************************************************
* @file stm32f1xx_hal_flash.h
* @author MCD Application Team
* @brief Header file of Flash HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_FLASH_H
#define __STM32F1xx_HAL_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/** @addtogroup FLASH_Private_Constants
* @{
*/
#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */
/**
* @}
*/
/** @addtogroup FLASH_Private_Macros
* @{
*/
#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
#if defined(FLASH_ACR_LATENCY)
#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
((__LATENCY__) == FLASH_LATENCY_1) || \
((__LATENCY__) == FLASH_LATENCY_2))
#else
#define IS_FLASH_LATENCY(__LATENCY__) ((__LATENCY__) == FLASH_LATENCY_0)
#endif /* FLASH_ACR_LATENCY */
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Procedure structure definition
*/
typedef enum
{
FLASH_PROC_NONE = 0U,
FLASH_PROC_PAGEERASE = 1U,
FLASH_PROC_MASSERASE = 2U,
FLASH_PROC_PROGRAMHALFWORD = 3U,
FLASH_PROC_PROGRAMWORD = 4U,
FLASH_PROC_PROGRAMDOUBLEWORD = 5U
} FLASH_ProcedureTypeDef;
/**
* @brief FLASH handle Structure definition
*/
typedef struct
{
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
__IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
__IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
__IO uint64_t Data; /*!< Internal variable to save data to be programmed */
HAL_LockTypeDef Lock; /*!< FLASH locking object */
__IO uint32_t ErrorCode; /*!< FLASH error code
This parameter can be a value of @ref FLASH_Error_Codes */
} FLASH_ProcessTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASH_Error_Codes FLASH Error Codes
* @{
*/
#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */
#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */
#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */
#define HAL_FLASH_ERROR_OPTV 0x04U /*!< Option validity error */
/**
* @}
*/
/** @defgroup FLASH_Type_Program FLASH Type Program
* @{
*/
#define FLASH_TYPEPROGRAM_HALFWORD 0x01U /*!<Program a half-word (16-bit) at a specified address.*/
#define FLASH_TYPEPROGRAM_WORD 0x02U /*!<Program a word (32-bit) at a specified address.*/
#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x03U /*!<Program a double word (64-bit) at a specified address*/
/**
* @}
*/
#if defined(FLASH_ACR_LATENCY)
/** @defgroup FLASH_Latency FLASH Latency
* @{
*/
#define FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two Latency cycles */
/**
* @}
*/
#else
/** @defgroup FLASH_Latency FLASH Latency
* @{
*/
#define FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */
/**
* @}
*/
#endif /* FLASH_ACR_LATENCY */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
* @brief macros to control FLASH features
* @{
*/
/** @defgroup FLASH_Half_Cycle FLASH Half Cycle
* @brief macros to handle FLASH half cycle
* @{
*/
/**
* @brief Enable the FLASH half cycle access.
* @note half cycle access can only be used with a low-frequency clock of less than
8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
* @retval None
*/
#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE() (FLASH->ACR |= FLASH_ACR_HLFCYA)
/**
* @brief Disable the FLASH half cycle access.
* @note half cycle access can only be used with a low-frequency clock of less than
8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
* @retval None
*/
#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
/**
* @}
*/
#if defined(FLASH_ACR_LATENCY)
/** @defgroup FLASH_EM_Latency FLASH Latency
* @brief macros to handle FLASH Latency
* @{
*/
/**
* @brief Set the FLASH Latency.
* @param __LATENCY__ FLASH Latency
* The value of this parameter depend on device used within the same series
* @retval None
*/
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
/**
* @brief Get the FLASH Latency.
* @retval FLASH Latency
* The value of this parameter depend on device used within the same series
*/
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
/**
* @}
*/
#endif /* FLASH_ACR_LATENCY */
/** @defgroup FLASH_Prefetch FLASH Prefetch
* @brief macros to handle FLASH Prefetch buffer
* @{
*/
/**
* @brief Enable the FLASH prefetch buffer.
* @retval None
*/
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
/**
* @brief Disable the FLASH prefetch buffer.
* @retval None
*/
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
/**
* @}
*/
/**
* @}
*/
/* Include FLASH HAL Extended module */
#include "stm32f1xx_hal_flash_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASH_Exported_Functions
* @{
*/
/** @addtogroup FLASH_Exported_Functions_Group1
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
/* FLASH IRQ handler function */
void HAL_FLASH_IRQHandler(void);
/* Callbacks in non blocking modes */
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_Lock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
void HAL_FLASH_OB_Launch(void);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group3
* @{
*/
/* Peripheral State and Error functions ***************************************/
uint32_t HAL_FLASH_GetError(void);
/**
* @}
*/
/**
* @}
*/
/* Private function -------------------------------------------------*/
/** @addtogroup FLASH_Private_Functions
* @{
*/
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
#if defined(FLASH_BANK2_END)
HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout);
#endif /* FLASH_BANK2_END */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_FLASH_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

786
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h Normal file
View File

@@ -0,0 +1,786 @@
/**
******************************************************************************
* @file stm32f1xx_hal_flash_ex.h
* @author MCD Application Team
* @brief Header file of Flash HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_FLASH_EX_H
#define __STM32F1xx_HAL_FLASH_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup FLASHEx
* @{
*/
/** @addtogroup FLASHEx_Private_Constants
* @{
*/
#define FLASH_SIZE_DATA_REGISTER 0x1FFFF7E0U
#define OBR_REG_INDEX 1U
#define SR_FLAG_MASK ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP))
/**
* @}
*/
/** @addtogroup FLASHEx_Private_Macros
* @{
*/
#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE))
#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE))
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1))
#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1))
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
#if defined(FLASH_BANK2_END)
#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
#endif /* FLASH_BANK2_END */
/* Low Density */
#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08007FFFU) : \
((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08003FFFU))
#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
/* Medium Density */
#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \
(((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU) : \
(((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFFU) : \
((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFFU))))
#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
/* High Density */
#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFFU) : \
(((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFFU) : \
((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU)))
#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
/* XL Density */
#if defined(FLASH_BANK2_END)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFFU) : \
((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFFU))
#endif /* FLASH_BANK2_END */
/* Connectivity Line */
#if (defined(STM32F105xC) || defined(STM32F107xC))
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU) : \
(((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \
((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU)))
#endif /* STM32F105xC || STM32F107xC */
#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
#if defined(FLASH_BANK2_END)
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
((BANK) == FLASH_BANK_2) || \
((BANK) == FLASH_BANK_BOTH))
#else
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
#endif /* FLASH_BANK2_END */
/* Low Density */
#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
((ADDRESS) <= FLASH_BANK1_END) : ((ADDRESS) <= 0x08003FFFU)))
#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
/* Medium Density */
#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \
((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFFU)))))
#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
/* High Density */
#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? \
((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? \
((ADDRESS) <= 0x0805FFFFU) : ((ADDRESS) <= 0x0803FFFFU))))
#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
/* XL Density */
#if defined(FLASH_BANK2_END)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? \
((ADDRESS) <= FLASH_BANK2_END) : ((ADDRESS) <= 0x080BFFFFU)))
#endif /* FLASH_BANK2_END */
/* Connectivity Line */
#if (defined(STM32F105xC) || defined(STM32F107xC))
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \
((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
((ADDRESS) <= 0x0801FFFFU) : ((ADDRESS) <= 0x0800FFFFU))))
#endif /* STM32F105xC || STM32F107xC */
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
* @{
*/
/**
* @brief FLASH Erase structure definition
*/
typedef struct
{
uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
This parameter can be a value of @ref FLASHEx_Type_Erase */
uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
This parameter must be a value of @ref FLASHEx_Banks */
uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END
(x = 1 or 2 depending on devices)*/
uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
} FLASH_EraseInitTypeDef;
/**
* @brief FLASH Options bytes program structure definition
*/
typedef struct
{
uint32_t OptionType; /*!< OptionType: Option byte to be configured.
This parameter can be a value of @ref FLASHEx_OB_Type */
uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
This parameter can be a value of @ref FLASHEx_OB_WRP_State */
uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected
This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
This parameter must be a value of @ref FLASHEx_Banks */
uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
#if defined(FLASH_BANK2_END)
uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
IWDG / STOP / STDBY / BOOT1
This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
@ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */
#else
uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
IWDG / STOP / STDBY
This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
@ref FLASHEx_OB_nRST_STDBY */
#endif /* FLASH_BANK2_END */
uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
This parameter can be a value of @ref FLASHEx_OB_Data_Address */
uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
} FLASH_OBProgramInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
* @{
*/
/** @defgroup FLASHEx_Constants FLASH Constants
* @{
*/
/** @defgroup FLASHEx_Page_Size Page Size
* @{
*/
#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
#define FLASH_PAGE_SIZE 0x400U
#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
/* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC))
#define FLASH_PAGE_SIZE 0x800U
#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
/* STM32F101xG || STM32F103xG */
/* STM32F105xC || STM32F107xC */
/**
* @}
*/
/** @defgroup FLASHEx_Type_Erase Type Erase
* @{
*/
#define FLASH_TYPEERASE_PAGES 0x00U /*!<Pages erase only*/
#define FLASH_TYPEERASE_MASSERASE 0x02U /*!<Flash mass erase activation*/
/**
* @}
*/
/** @defgroup FLASHEx_Banks Banks
* @{
*/
#if defined(FLASH_BANK2_END)
#define FLASH_BANK_1 1U /*!< Bank 1 */
#define FLASH_BANK_2 2U /*!< Bank 2 */
#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
#else
#define FLASH_BANK_1 1U /*!< Bank 1 */
#endif
/**
* @}
*/
/**
* @}
*/
/** @defgroup FLASHEx_OptionByte_Constants Option Byte Constants
* @{
*/
/** @defgroup FLASHEx_OB_Type Option Bytes Type
* @{
*/
#define OPTIONBYTE_WRP 0x01U /*!<WRP option byte configuration*/
#define OPTIONBYTE_RDP 0x02U /*!<RDP option byte configuration*/
#define OPTIONBYTE_USER 0x04U /*!<USER option byte configuration*/
#define OPTIONBYTE_DATA 0x08U /*!<DATA option byte configuration*/
/**
* @}
*/
/** @defgroup FLASHEx_OB_WRP_State Option Byte WRP State
* @{
*/
#define OB_WRPSTATE_DISABLE 0x00U /*!<Disable the write protection of the desired pages*/
#define OB_WRPSTATE_ENABLE 0x01U /*!<Enable the write protection of the desired pagess*/
/**
* @}
*/
/** @defgroup FLASHEx_OB_Write_Protection Option Bytes Write Protection
* @{
*/
/* STM32 Low and Medium density devices */
#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) \
|| defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) \
|| defined(STM32F103xB)
#define OB_WRP_PAGES0TO3 0x00000001U /*!< Write protection of page 0 to 3 */
#define OB_WRP_PAGES4TO7 0x00000002U /*!< Write protection of page 4 to 7 */
#define OB_WRP_PAGES8TO11 0x00000004U /*!< Write protection of page 8 to 11 */
#define OB_WRP_PAGES12TO15 0x00000008U /*!< Write protection of page 12 to 15 */
#define OB_WRP_PAGES16TO19 0x00000010U /*!< Write protection of page 16 to 19 */
#define OB_WRP_PAGES20TO23 0x00000020U /*!< Write protection of page 20 to 23 */
#define OB_WRP_PAGES24TO27 0x00000040U /*!< Write protection of page 24 to 27 */
#define OB_WRP_PAGES28TO31 0x00000080U /*!< Write protection of page 28 to 31 */
#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
/* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
/* STM32 Medium-density devices */
#if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
#define OB_WRP_PAGES32TO35 0x00000100U /*!< Write protection of page 32 to 35 */
#define OB_WRP_PAGES36TO39 0x00000200U /*!< Write protection of page 36 to 39 */
#define OB_WRP_PAGES40TO43 0x00000400U /*!< Write protection of page 40 to 43 */
#define OB_WRP_PAGES44TO47 0x00000800U /*!< Write protection of page 44 to 47 */
#define OB_WRP_PAGES48TO51 0x00001000U /*!< Write protection of page 48 to 51 */
#define OB_WRP_PAGES52TO55 0x00002000U /*!< Write protection of page 52 to 55 */
#define OB_WRP_PAGES56TO59 0x00004000U /*!< Write protection of page 56 to 59 */
#define OB_WRP_PAGES60TO63 0x00008000U /*!< Write protection of page 60 to 63 */
#define OB_WRP_PAGES64TO67 0x00010000U /*!< Write protection of page 64 to 67 */
#define OB_WRP_PAGES68TO71 0x00020000U /*!< Write protection of page 68 to 71 */
#define OB_WRP_PAGES72TO75 0x00040000U /*!< Write protection of page 72 to 75 */
#define OB_WRP_PAGES76TO79 0x00080000U /*!< Write protection of page 76 to 79 */
#define OB_WRP_PAGES80TO83 0x00100000U /*!< Write protection of page 80 to 83 */
#define OB_WRP_PAGES84TO87 0x00200000U /*!< Write protection of page 84 to 87 */
#define OB_WRP_PAGES88TO91 0x00400000U /*!< Write protection of page 88 to 91 */
#define OB_WRP_PAGES92TO95 0x00800000U /*!< Write protection of page 92 to 95 */
#define OB_WRP_PAGES96TO99 0x01000000U /*!< Write protection of page 96 to 99 */
#define OB_WRP_PAGES100TO103 0x02000000U /*!< Write protection of page 100 to 103 */
#define OB_WRP_PAGES104TO107 0x04000000U /*!< Write protection of page 104 to 107 */
#define OB_WRP_PAGES108TO111 0x08000000U /*!< Write protection of page 108 to 111 */
#define OB_WRP_PAGES112TO115 0x10000000U /*!< Write protection of page 112 to 115 */
#define OB_WRP_PAGES116TO119 0x20000000U /*!< Write protection of page 115 to 119 */
#define OB_WRP_PAGES120TO123 0x40000000U /*!< Write protection of page 120 to 123 */
#define OB_WRP_PAGES124TO127 0x80000000U /*!< Write protection of page 124 to 127 */
#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
/* STM32 High-density, XL-density and Connectivity line devices */
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) \
|| defined(STM32F101xG) || defined(STM32F103xG) \
|| defined(STM32F105xC) || defined(STM32F107xC)
#define OB_WRP_PAGES0TO1 0x00000001U /*!< Write protection of page 0 TO 1 */
#define OB_WRP_PAGES2TO3 0x00000002U /*!< Write protection of page 2 TO 3 */
#define OB_WRP_PAGES4TO5 0x00000004U /*!< Write protection of page 4 TO 5 */
#define OB_WRP_PAGES6TO7 0x00000008U /*!< Write protection of page 6 TO 7 */
#define OB_WRP_PAGES8TO9 0x00000010U /*!< Write protection of page 8 TO 9 */
#define OB_WRP_PAGES10TO11 0x00000020U /*!< Write protection of page 10 TO 11 */
#define OB_WRP_PAGES12TO13 0x00000040U /*!< Write protection of page 12 TO 13 */
#define OB_WRP_PAGES14TO15 0x00000080U /*!< Write protection of page 14 TO 15 */
#define OB_WRP_PAGES16TO17 0x00000100U /*!< Write protection of page 16 TO 17 */
#define OB_WRP_PAGES18TO19 0x00000200U /*!< Write protection of page 18 TO 19 */
#define OB_WRP_PAGES20TO21 0x00000400U /*!< Write protection of page 20 TO 21 */
#define OB_WRP_PAGES22TO23 0x00000800U /*!< Write protection of page 22 TO 23 */
#define OB_WRP_PAGES24TO25 0x00001000U /*!< Write protection of page 24 TO 25 */
#define OB_WRP_PAGES26TO27 0x00002000U /*!< Write protection of page 26 TO 27 */
#define OB_WRP_PAGES28TO29 0x00004000U /*!< Write protection of page 28 TO 29 */
#define OB_WRP_PAGES30TO31 0x00008000U /*!< Write protection of page 30 TO 31 */
#define OB_WRP_PAGES32TO33 0x00010000U /*!< Write protection of page 32 TO 33 */
#define OB_WRP_PAGES34TO35 0x00020000U /*!< Write protection of page 34 TO 35 */
#define OB_WRP_PAGES36TO37 0x00040000U /*!< Write protection of page 36 TO 37 */
#define OB_WRP_PAGES38TO39 0x00080000U /*!< Write protection of page 38 TO 39 */
#define OB_WRP_PAGES40TO41 0x00100000U /*!< Write protection of page 40 TO 41 */
#define OB_WRP_PAGES42TO43 0x00200000U /*!< Write protection of page 42 TO 43 */
#define OB_WRP_PAGES44TO45 0x00400000U /*!< Write protection of page 44 TO 45 */
#define OB_WRP_PAGES46TO47 0x00800000U /*!< Write protection of page 46 TO 47 */
#define OB_WRP_PAGES48TO49 0x01000000U /*!< Write protection of page 48 TO 49 */
#define OB_WRP_PAGES50TO51 0x02000000U /*!< Write protection of page 50 TO 51 */
#define OB_WRP_PAGES52TO53 0x04000000U /*!< Write protection of page 52 TO 53 */
#define OB_WRP_PAGES54TO55 0x08000000U /*!< Write protection of page 54 TO 55 */
#define OB_WRP_PAGES56TO57 0x10000000U /*!< Write protection of page 56 TO 57 */
#define OB_WRP_PAGES58TO59 0x20000000U /*!< Write protection of page 58 TO 59 */
#define OB_WRP_PAGES60TO61 0x40000000U /*!< Write protection of page 60 TO 61 */
#define OB_WRP_PAGES62TO127 0x80000000U /*!< Write protection of page 62 TO 127 */
#define OB_WRP_PAGES62TO255 0x80000000U /*!< Write protection of page 62 TO 255 */
#define OB_WRP_PAGES62TO511 0x80000000U /*!< Write protection of page 62 TO 511 */
#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
/* STM32F101xG || STM32F103xG */
/* STM32F105xC || STM32F107xC */
#define OB_WRP_ALLPAGES 0xFFFFFFFFU /*!< Write protection of all Pages */
/* Low Density */
#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)
#define OB_WRP_PAGES0TO31MASK 0x000000FFU
#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
/* Medium Density */
#if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
#define OB_WRP_PAGES0TO31MASK 0x000000FFU
#define OB_WRP_PAGES32TO63MASK 0x0000FF00U
#define OB_WRP_PAGES64TO95MASK 0x00FF0000U
#define OB_WRP_PAGES96TO127MASK 0xFF000000U
#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
/* High Density */
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)
#define OB_WRP_PAGES0TO15MASK 0x000000FFU
#define OB_WRP_PAGES16TO31MASK 0x0000FF00U
#define OB_WRP_PAGES32TO47MASK 0x00FF0000U
#define OB_WRP_PAGES48TO255MASK 0xFF000000U
#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
/* XL Density */
#if defined(STM32F101xG) || defined(STM32F103xG)
#define OB_WRP_PAGES0TO15MASK 0x000000FFU
#define OB_WRP_PAGES16TO31MASK 0x0000FF00U
#define OB_WRP_PAGES32TO47MASK 0x00FF0000U
#define OB_WRP_PAGES48TO511MASK 0xFF000000U
#endif /* STM32F101xG || STM32F103xG */
/* Connectivity line devices */
#if defined(STM32F105xC) || defined(STM32F107xC)
#define OB_WRP_PAGES0TO15MASK 0x000000FFU
#define OB_WRP_PAGES16TO31MASK 0x0000FF00U
#define OB_WRP_PAGES32TO47MASK 0x00FF0000U
#define OB_WRP_PAGES48TO127MASK 0xFF000000U
#endif /* STM32F105xC || STM32F107xC */
/**
* @}
*/
/** @defgroup FLASHEx_OB_Read_Protection Option Byte Read Protection
* @{
*/
#define OB_RDP_LEVEL_0 ((uint8_t)0xA5)
#define OB_RDP_LEVEL_1 ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup FLASHEx_OB_IWatchdog Option Byte IWatchdog
* @{
*/
#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */
/**
* @}
*/
/** @defgroup FLASHEx_OB_nRST_STOP Option Byte nRST STOP
* @{
*/
#define OB_STOP_NO_RST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
/**
* @}
*/
/** @defgroup FLASHEx_OB_nRST_STDBY Option Byte nRST STDBY
* @{
*/
#define OB_STDBY_NO_RST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
/**
* @}
*/
#if defined(FLASH_BANK2_END)
/** @defgroup FLASHEx_OB_BOOT1 Option Byte BOOT1
* @{
*/
#define OB_BOOT1_RESET ((uint16_t)0x0000) /*!< BOOT1 Reset */
#define OB_BOOT1_SET ((uint16_t)0x0008) /*!< BOOT1 Set */
/**
* @}
*/
#endif /* FLASH_BANK2_END */
/** @defgroup FLASHEx_OB_Data_Address Option Byte Data Address
* @{
*/
#define OB_DATA_ADDRESS_DATA0 0x1FFFF804U
#define OB_DATA_ADDRESS_DATA1 0x1FFFF806U
/**
* @}
*/
/**
* @}
*/
/** @addtogroup FLASHEx_Constants
* @{
*/
/** @defgroup FLASH_Flag_definition Flag definition
* @brief Flag definition
* @{
*/
#if defined(FLASH_BANK2_END)
#define FLASH_FLAG_BSY FLASH_FLAG_BSY_BANK1 /*!< FLASH Bank1 Busy flag */
#define FLASH_FLAG_PGERR FLASH_FLAG_PGERR_BANK1 /*!< FLASH Bank1 Programming error flag */
#define FLASH_FLAG_WRPERR FLASH_FLAG_WRPERR_BANK1 /*!< FLASH Bank1 Write protected error flag */
#define FLASH_FLAG_EOP FLASH_FLAG_EOP_BANK1 /*!< FLASH Bank1 End of Operation flag */
#define FLASH_FLAG_BSY_BANK1 FLASH_SR_BSY /*!< FLASH Bank1 Busy flag */
#define FLASH_FLAG_PGERR_BANK1 FLASH_SR_PGERR /*!< FLASH Bank1 Programming error flag */
#define FLASH_FLAG_WRPERR_BANK1 FLASH_SR_WRPRTERR /*!< FLASH Bank1 Write protected error flag */
#define FLASH_FLAG_EOP_BANK1 FLASH_SR_EOP /*!< FLASH Bank1 End of Operation flag */
#define FLASH_FLAG_BSY_BANK2 (FLASH_SR2_BSY << 16U) /*!< FLASH Bank2 Busy flag */
#define FLASH_FLAG_PGERR_BANK2 (FLASH_SR2_PGERR << 16U) /*!< FLASH Bank2 Programming error flag */
#define FLASH_FLAG_WRPERR_BANK2 (FLASH_SR2_WRPRTERR << 16U) /*!< FLASH Bank2 Write protected error flag */
#define FLASH_FLAG_EOP_BANK2 (FLASH_SR2_EOP << 16U) /*!< FLASH Bank2 End of Operation flag */
#else
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */
#define FLASH_FLAG_WRPERR FLASH_SR_WRPRTERR /*!< FLASH Write protected error flag */
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
#endif
#define FLASH_FLAG_OPTVERR ((OBR_REG_INDEX << 8U | FLASH_OBR_OPTERR)) /*!< Option Byte Error */
/**
* @}
*/
/** @defgroup FLASH_Interrupt_definition Interrupt definition
* @brief FLASH Interrupt definition
* @{
*/
#if defined(FLASH_BANK2_END)
#define FLASH_IT_EOP FLASH_IT_EOP_BANK1 /*!< End of FLASH Operation Interrupt source Bank1 */
#define FLASH_IT_ERR FLASH_IT_ERR_BANK1 /*!< Error Interrupt source Bank1 */
#define FLASH_IT_EOP_BANK1 FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source Bank1 */
#define FLASH_IT_ERR_BANK1 FLASH_CR_ERRIE /*!< Error Interrupt source Bank1 */
#define FLASH_IT_EOP_BANK2 (FLASH_CR2_EOPIE << 16U) /*!< End of FLASH Operation Interrupt source Bank2 */
#define FLASH_IT_ERR_BANK2 (FLASH_CR2_ERRIE << 16U) /*!< Error Interrupt source Bank2 */
#else
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros
* @{
*/
/** @defgroup FLASH_Interrupt Interrupt
* @brief macros to handle FLASH interrupts
* @{
*/
#if defined(FLASH_BANK2_END)
/**
* @brief Enable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
* @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
* @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
* @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
* @retval none
*/
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { \
/* Enable Bank1 IT */ \
SET_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \
/* Enable Bank2 IT */ \
SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \
} while(0U)
/**
* @brief Disable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
* @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
* @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
* @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
* @retval none
*/
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { \
/* Disable Bank1 IT */ \
CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \
/* Disable Bank2 IT */ \
CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \
} while(0U)
/**
* @brief Get the specified FLASH flag status.
* @param __FLAG__ specifies the FLASH flag to check.
* This parameter can be one of the following values:
* @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1
* @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
* @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1
* @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1
* @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2
* @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
* @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2
* @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2
* @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
(FLASH->OBR & FLASH_OBR_OPTERR) : \
((((__FLAG__) & SR_FLAG_MASK) != RESET)? \
(FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \
(FLASH->SR2 & ((__FLAG__) >> 16U))))
/**
* @brief Clear the specified FLASH flag.
* @param __FLAG__ specifies the FLASH flags to clear.
* This parameter can be any combination of the following values:
* @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1
* @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
* @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1
* @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1
* @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2
* @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
* @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2
* @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2
* @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
* @retval none
*/
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \
/* Clear FLASH_FLAG_OPTVERR flag */ \
if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
{ \
CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
} \
else { \
/* Clear Flag in Bank1 */ \
if (((__FLAG__) & SR_FLAG_MASK) != RESET) \
{ \
FLASH->SR = ((__FLAG__) & SR_FLAG_MASK); \
} \
/* Clear Flag in Bank2 */ \
if (((__FLAG__) >> 16U) != RESET) \
{ \
FLASH->SR2 = ((__FLAG__) >> 16U); \
} \
} \
} while(0U)
#else
/**
* @brief Enable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
* @arg @ref FLASH_IT_ERR Error Interrupt
* @retval none
*/
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
/**
* @brief Disable the specified FLASH interrupt.
* @param __INTERRUPT__ FLASH interrupt
* This parameter can be any combination of the following values:
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
* @arg @ref FLASH_IT_ERR Error Interrupt
* @retval none
*/
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(__INTERRUPT__))
/**
* @brief Get the specified FLASH flag status.
* @param __FLAG__ specifies the FLASH flag to check.
* This parameter can be one of the following values:
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
* @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
* @arg @ref FLASH_FLAG_BSY FLASH Busy flag
* @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
(FLASH->OBR & FLASH_OBR_OPTERR) : \
(FLASH->SR & (__FLAG__)))
/**
* @brief Clear the specified FLASH flag.
* @param __FLAG__ specifies the FLASH flags to clear.
* This parameter can be any combination of the following values:
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
* @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
* @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
* @retval none
*/
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \
/* Clear FLASH_FLAG_OPTVERR flag */ \
if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
{ \
CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
} \
else { \
/* Clear Flag in Bank1 */ \
FLASH->SR = (__FLAG__); \
} \
} while(0U)
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASHEx_Exported_Functions
* @{
*/
/** @addtogroup FLASHEx_Exported_Functions_Group1
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
/**
* @}
*/
/** @addtogroup FLASHEx_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_FLASHEx_OBErase(void);
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_FLASH_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

308
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h Normal file
View File

@@ -0,0 +1,308 @@
/**
******************************************************************************
* @file stm32f1xx_hal_gpio.h
* @author MCD Application Team
* @brief Header file of GPIO HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F1xx_HAL_GPIO_H
#define STM32F1xx_HAL_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Types GPIO Exported Types
* @{
*/
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIO_mode_define */
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
This parameter can be a value of @ref GPIO_pull_define */
uint32_t Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIO_speed_define */
} GPIO_InitTypeDef;
/**
* @brief GPIO Bit SET and Bit RESET enumeration
*/
typedef enum
{
GPIO_PIN_RESET = 0u,
GPIO_PIN_SET
} GPIO_PinState;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
* @{
*/
/** @defgroup GPIO_pins_define GPIO pins define
* @{
*/
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
#define GPIO_PIN_MASK 0x0000FFFFu /* PIN mask for assert test */
/**
* @}
*/
/** @defgroup GPIO_mode_define GPIO mode define
* @brief GPIO Configuration Mode
* Elements values convention: 0xX0yz00YZ
* - X : GPIO mode or EXTI Mode
* - y : External IT or Event trigger detection
* - z : IO configuration on External IT or Event
* - Y : Output type (Push Pull or Open Drain)
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
* @{
*/
#define GPIO_MODE_INPUT 0x00000000u /*!< Input Floating Mode */
#define GPIO_MODE_OUTPUT_PP 0x00000001u /*!< Output Push Pull Mode */
#define GPIO_MODE_OUTPUT_OD 0x00000011u /*!< Output Open Drain Mode */
#define GPIO_MODE_AF_PP 0x00000002u /*!< Alternate Function Push Pull Mode */
#define GPIO_MODE_AF_OD 0x00000012u /*!< Alternate Function Open Drain Mode */
#define GPIO_MODE_AF_INPUT GPIO_MODE_INPUT /*!< Alternate Function Input Mode */
#define GPIO_MODE_ANALOG 0x00000003u /*!< Analog Mode */
#define GPIO_MODE_IT_RISING 0x10110000u /*!< External Interrupt Mode with Rising edge trigger detection */
#define GPIO_MODE_IT_FALLING 0x10210000u /*!< External Interrupt Mode with Falling edge trigger detection */
#define GPIO_MODE_IT_RISING_FALLING 0x10310000u /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING 0x10120000u /*!< External Event Mode with Rising edge trigger detection */
#define GPIO_MODE_EVT_FALLING 0x10220000u /*!< External Event Mode with Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING_FALLING 0x10320000u /*!< External Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup GPIO_speed_define GPIO speed define
* @brief GPIO Output Maximum frequency
* @{
*/
#define GPIO_SPEED_FREQ_LOW (GPIO_CRL_MODE0_1) /*!< Low speed */
#define GPIO_SPEED_FREQ_MEDIUM (GPIO_CRL_MODE0_0) /*!< Medium speed */
#define GPIO_SPEED_FREQ_HIGH (GPIO_CRL_MODE0) /*!< High speed */
/**
* @}
*/
/** @defgroup GPIO_pull_define GPIO pull define
* @brief GPIO Pull-Up or Pull-Down Activation
* @{
*/
#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */
#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */
#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
* @{
*/
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param __EXTI_LINE__: specifies the EXTI line flag to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending flags.
* @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
/**
* @brief Checks whether the specified EXTI line is asserted or not.
* @param __EXTI_LINE__: specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending bits.
* @param __EXTI_LINE__: specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
/**
* @brief Generates a Software interrupt on selected EXTI line.
* @param __EXTI_LINE__: specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
/**
* @}
*/
/* Include GPIO HAL Extension module */
#include "stm32f1xx_hal_gpio_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup GPIO_Exported_Functions
* @{
*/
/** @addtogroup GPIO_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
/**
* @}
*/
/** @addtogroup GPIO_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup GPIO_Private_Macros GPIO Private Macros
* @{
*/
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00u) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00u))
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
((MODE) == GPIO_MODE_AF_PP) ||\
((MODE) == GPIO_MODE_AF_OD) ||\
((MODE) == GPIO_MODE_IT_RISING) ||\
((MODE) == GPIO_MODE_IT_FALLING) ||\
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
((MODE) == GPIO_MODE_EVT_RISING) ||\
((MODE) == GPIO_MODE_EVT_FALLING) ||\
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
((MODE) == GPIO_MODE_ANALOG))
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || \
((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || ((SPEED) == GPIO_SPEED_FREQ_HIGH))
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
((PULL) == GPIO_PULLDOWN))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup GPIO_Private_Functions GPIO Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F1xx_HAL_GPIO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

894
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h Normal file
View File

@@ -0,0 +1,894 @@
/**
******************************************************************************
* @file stm32f1xx_hal_gpio_ex.h
* @author MCD Application Team
* @brief Header file of GPIO HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F1xx_HAL_GPIO_EX_H
#define STM32F1xx_HAL_GPIO_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @defgroup GPIOEx GPIOEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
* @{
*/
/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration
* @brief This section propose definition to use the Cortex EVENTOUT signal.
* @{
*/
/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin
* @{
*/
#define AFIO_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */
#define AFIO_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */
#define AFIO_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */
#define AFIO_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */
#define AFIO_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */
#define AFIO_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */
#define AFIO_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */
#define AFIO_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */
#define AFIO_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */
#define AFIO_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */
#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */
#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */
#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */
#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */
#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */
#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */
#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \
((__PIN__) == AFIO_EVENTOUT_PIN_1) || \
((__PIN__) == AFIO_EVENTOUT_PIN_2) || \
((__PIN__) == AFIO_EVENTOUT_PIN_3) || \
((__PIN__) == AFIO_EVENTOUT_PIN_4) || \
((__PIN__) == AFIO_EVENTOUT_PIN_5) || \
((__PIN__) == AFIO_EVENTOUT_PIN_6) || \
((__PIN__) == AFIO_EVENTOUT_PIN_7) || \
((__PIN__) == AFIO_EVENTOUT_PIN_8) || \
((__PIN__) == AFIO_EVENTOUT_PIN_9) || \
((__PIN__) == AFIO_EVENTOUT_PIN_10) || \
((__PIN__) == AFIO_EVENTOUT_PIN_11) || \
((__PIN__) == AFIO_EVENTOUT_PIN_12) || \
((__PIN__) == AFIO_EVENTOUT_PIN_13) || \
((__PIN__) == AFIO_EVENTOUT_PIN_14) || \
((__PIN__) == AFIO_EVENTOUT_PIN_15))
/**
* @}
*/
/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port
* @{
*/
#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */
#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */
#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */
#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */
#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */
#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \
((__PORT__) == AFIO_EVENTOUT_PORT_B) || \
((__PORT__) == AFIO_EVENTOUT_PORT_C) || \
((__PORT__) == AFIO_EVENTOUT_PORT_D) || \
((__PORT__) == AFIO_EVENTOUT_PORT_E))
/**
* @}
*/
/**
* @}
*/
/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping
* @brief This section propose definition to remap the alternate function to some other port/pins.
* @{
*/
/**
* @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
* @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5)
* @retval None
*/
#define __HAL_AFIO_REMAP_SPI1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP)
/**
* @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
* @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7)
* @retval None
*/
#define __HAL_AFIO_REMAP_SPI1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP)
/**
* @brief Enable the remapping of I2C1 alternate function SCL and SDA.
* @note ENABLE: Remap (SCL/PB8, SDA/PB9)
* @retval None
*/
#define __HAL_AFIO_REMAP_I2C1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP)
/**
* @brief Disable the remapping of I2C1 alternate function SCL and SDA.
* @note DISABLE: No remap (SCL/PB6, SDA/PB7)
* @retval None
*/
#define __HAL_AFIO_REMAP_I2C1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP)
/**
* @brief Enable the remapping of USART1 alternate function TX and RX.
* @note ENABLE: Remap (TX/PB6, RX/PB7)
* @retval None
*/
#define __HAL_AFIO_REMAP_USART1_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP)
/**
* @brief Disable the remapping of USART1 alternate function TX and RX.
* @note DISABLE: No remap (TX/PA9, RX/PA10)
* @retval None
*/
#define __HAL_AFIO_REMAP_USART1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP)
/**
* @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
* @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7)
* @retval None
*/
#define __HAL_AFIO_REMAP_USART2_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP)
/**
* @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
* @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4)
* @retval None
*/
#define __HAL_AFIO_REMAP_USART2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP)
/**
* @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
* @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12)
* @retval None
*/
#define __HAL_AFIO_REMAP_USART3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
* @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14)
* @retval None
*/
#define __HAL_AFIO_REMAP_USART3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
/**
* @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
* @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14)
* @retval None
*/
#define __HAL_AFIO_REMAP_USART3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
* @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM1_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
* @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM1_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
/**
* @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
* @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM1_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
* @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM2_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
* @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
* @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
/**
* @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
* @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM2_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM3 alternate function channels 1 to 4
* @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9)
* @note TIM3_ETR on PE0 is not re-mapped.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM3_ENABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM3 alternate function channels 1 to 4
* @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1)
* @note TIM3_ETR on PE0 is not re-mapped.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM3_PARTIAL() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
/**
* @brief Disable the remapping of TIM3 alternate function channels 1 to 4
* @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1)
* @note TIM3_ETR on PE0 is not re-mapped.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM3_DISABLE() AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
/**
* @brief Enable the remapping of TIM4 alternate function channels 1 to 4.
* @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15)
* @note TIM4_ETR on PE0 is not re-mapped.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM4_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP)
/**
* @brief Disable the remapping of TIM4 alternate function channels 1 to 4.
* @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9)
* @note TIM4_ETR on PE0 is not re-mapped.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP)
#if defined(AFIO_MAPR_CAN_REMAP_REMAP1)
/**
* @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
* @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12
* @retval None
*/
#define __HAL_AFIO_REMAP_CAN1_1() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP1, AFIO_MAPR_CAN_REMAP)
/**
* @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
* @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package)
* @retval None
*/
#define __HAL_AFIO_REMAP_CAN1_2() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP2, AFIO_MAPR_CAN_REMAP)
/**
* @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
* @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1
* @retval None
*/
#define __HAL_AFIO_REMAP_CAN1_3() AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP3, AFIO_MAPR_CAN_REMAP)
#endif
/**
* @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used
* (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
* OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
* on 100-pin and 144-pin packages, no need for remapping).
* @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT.
* @retval None
*/
#define __HAL_AFIO_REMAP_PD01_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP)
/**
* @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used
* (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
* OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
* on 100-pin and 144-pin packages, no need for remapping).
* @note DISABLE: No remapping of PD0 and PD1
* @retval None
*/
#define __HAL_AFIO_REMAP_PD01_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP)
#if defined(AFIO_MAPR_TIM5CH4_IREMAP)
/**
* @brief Enable the remapping of TIM5CH4.
* @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose.
* @note This function is available only in high density value line devices.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM5CH4_IREMAP)
/**
* @brief Disable the remapping of TIM5CH4.
* @note DISABLE: TIM5_CH4 is connected to PA3
* @note This function is available only in high density value line devices.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM5CH4_IREMAP)
#endif
#if defined(AFIO_MAPR_ETH_REMAP)
/**
* @brief Enable the remapping of Ethernet MAC connections with the PHY.
* @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12)
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_REMAP_ETH_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ETH_REMAP)
/**
* @brief Disable the remapping of Ethernet MAC connections with the PHY.
* @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1)
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_REMAP_ETH_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ETH_REMAP)
#endif
#if defined(AFIO_MAPR_CAN2_REMAP)
/**
* @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
* @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6)
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_REMAP_CAN2_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_CAN2_REMAP)
/**
* @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
* @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13)
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_REMAP_CAN2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_CAN2_REMAP)
#endif
#if defined(AFIO_MAPR_MII_RMII_SEL)
/**
* @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
* @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_ETH_RMII() AFIO_REMAP_ENABLE(AFIO_MAPR_MII_RMII_SEL)
/**
* @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
* @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_ETH_MII() AFIO_REMAP_DISABLE(AFIO_MAPR_MII_RMII_SEL)
#endif
/**
* @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
* @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4.
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
/**
* @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
* @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
/**
* @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
* @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0.
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
/**
* @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
* @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
/**
* @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
* @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4.
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
/**
* @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
* @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
#endif
#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP)
/**
* @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
* @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0.
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
/**
* @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
* @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11
* @retval None
*/
#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
#endif
/**
* @brief Enable the Serial wire JTAG configuration
* @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State
* @retval None
*/
#define __HAL_AFIO_REMAP_SWJ_ENABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET)
/**
* @brief Enable the Serial wire JTAG configuration
* @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST
* @retval None
*/
#define __HAL_AFIO_REMAP_SWJ_NONJTRST() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST)
/**
* @brief Enable the Serial wire JTAG configuration
* @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled
* @retval None
*/
#define __HAL_AFIO_REMAP_SWJ_NOJTAG() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE)
/**
* @brief Disable the Serial wire JTAG configuration
* @note DISABLE: JTAG-DP Disabled and SW-DP Disabled
* @retval None
*/
#define __HAL_AFIO_REMAP_SWJ_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE)
#if defined(AFIO_MAPR_SPI3_REMAP)
/**
* @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
* @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12)
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_REMAP_SPI3_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_SPI3_REMAP)
/**
* @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
* @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5).
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_REMAP_SPI3_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI3_REMAP)
#endif
#if defined(AFIO_MAPR_TIM2ITR1_IREMAP)
/**
* @brief Control of TIM2_ITR1 internal mapping.
* @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes.
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_TIM2ITR1_TO_USB() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
/**
* @brief Control of TIM2_ITR1 internal mapping.
* @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes.
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_TIM2ITR1_TO_ETH() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
#endif
#if defined(AFIO_MAPR_PTP_PPS_REMAP)
/**
* @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
* @note ENABLE: PTP_PPS is output on PB5 pin.
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_ETH_PTP_PPS_ENABLE() AFIO_REMAP_ENABLE(AFIO_MAPR_PTP_PPS_REMAP)
/**
* @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
* @note DISABLE: PTP_PPS not output on PB5 pin.
* @note This bit is available only in connectivity line devices and is reserved otherwise.
* @retval None
*/
#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PTP_PPS_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM9_REMAP)
/**
* @brief Enable the remapping of TIM9_CH1 and TIM9_CH2.
* @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM9_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
/**
* @brief Disable the remapping of TIM9_CH1 and TIM9_CH2.
* @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM10_REMAP)
/**
* @brief Enable the remapping of TIM10_CH1.
* @note ENABLE: Remap (TIM10_CH1 on PF6).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM10_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
/**
* @brief Disable the remapping of TIM10_CH1.
* @note DISABLE: No remap (TIM10_CH1 on PB8).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM11_REMAP)
/**
* @brief Enable the remapping of TIM11_CH1.
* @note ENABLE: Remap (TIM11_CH1 on PF7).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM11_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
/**
* @brief Disable the remapping of TIM11_CH1.
* @note DISABLE: No remap (TIM11_CH1 on PB9).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM13_REMAP)
/**
* @brief Enable the remapping of TIM13_CH1.
* @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM13_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
/**
* @brief Disable the remapping of TIM13_CH1.
* @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM14_REMAP)
/**
* @brief Enable the remapping of TIM14_CH1.
* @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM14_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
/**
* @brief Disable the remapping of TIM14_CH1.
* @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
#endif
#if defined(AFIO_MAPR2_FSMC_NADV_REMAP)
/**
* @brief Controls the use of the optional FSMC_NADV signal.
* @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral.
* @retval None
*/
#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
/**
* @brief Controls the use of the optional FSMC_NADV signal.
* @note CONNECTED: The NADV signal is connected to the output (default).
* @retval None
*/
#define __HAL_AFIO_FSMCNADV_CONNECTED() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM15_REMAP)
/**
* @brief Enable the remapping of TIM15_CH1 and TIM15_CH2.
* @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM15_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
/**
* @brief Disable the remapping of TIM15_CH1 and TIM15_CH2.
* @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM16_REMAP)
/**
* @brief Enable the remapping of TIM16_CH1.
* @note ENABLE: Remap (TIM16_CH1 on PA6).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM16_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
/**
* @brief Disable the remapping of TIM16_CH1.
* @note DISABLE: No remap (TIM16_CH1 on PB8).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM17_REMAP)
/**
* @brief Enable the remapping of TIM17_CH1.
* @note ENABLE: Remap (TIM17_CH1 on PA7).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM17_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
/**
* @brief Disable the remapping of TIM17_CH1.
* @note DISABLE: No remap (TIM17_CH1 on PB9).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
#endif
#if defined(AFIO_MAPR2_CEC_REMAP)
/**
* @brief Enable the remapping of CEC.
* @note ENABLE: Remap (CEC on PB10).
* @retval None
*/
#define __HAL_AFIO_REMAP_CEC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
/**
* @brief Disable the remapping of CEC.
* @note DISABLE: No remap (CEC on PB8).
* @retval None
*/
#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM1_DMA_REMAP)
/**
* @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
* @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
/**
* @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
* @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3).
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
/**
* @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
* @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
/**
* @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
* @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4)
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
#endif
#if defined(AFIO_MAPR2_TIM12_REMAP)
/**
* @brief Enable the remapping of TIM12_CH1 and TIM12_CH2.
* @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13).
* @note This bit is available only in high density value line devices.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM12_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
/**
* @brief Disable the remapping of TIM12_CH1 and TIM12_CH2.
* @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5).
* @note This bit is available only in high density value line devices.
* @retval None
*/
#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
#endif
#if defined(AFIO_MAPR2_MISC_REMAP)
/**
* @brief Miscellaneous features remapping.
* This bit is set and cleared by software. It controls miscellaneous features.
* The DMA2 channel 5 interrupt position in the vector table.
* The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
* @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is
* selected as DAC Trigger 3, TIM15 triggers TIM1/3.
* @note This bit is available only in high density value line devices.
* @retval None
*/
#define __HAL_AFIO_REMAP_MISC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
/**
* @brief Miscellaneous features remapping.
* This bit is set and cleared by software. It controls miscellaneous features.
* The DMA2 channel 5 interrupt position in the vector table.
* The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
* @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO
* event is selected as DAC Trigger 3, TIM5 triggers TIM1/3.
* @note This bit is available only in high density value line devices.
* @retval None
*/
#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
#endif
/**
* @}
*/
/**
* @}
*/
/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros
* @{
*/
#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)
#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
((__GPIOx__) == (GPIOB))? 1uL :\
((__GPIOx__) == (GPIOC))? 2uL :3uL)
#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC)
#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
((__GPIOx__) == (GPIOB))? 1uL :\
((__GPIOx__) == (GPIOC))? 2uL :\
((__GPIOx__) == (GPIOD))? 3uL :4uL)
#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\
((__GPIOx__) == (GPIOB))? 1uL :\
((__GPIOx__) == (GPIOC))? 2uL :\
((__GPIOx__) == (GPIOD))? 3uL :\
((__GPIOx__) == (GPIOE))? 4uL :\
((__GPIOx__) == (GPIOF))? 5uL :6uL)
#endif
#define AFIO_REMAP_ENABLE(REMAP_PIN) do{ uint32_t tmpreg = AFIO->MAPR; \
tmpreg |= AFIO_MAPR_SWJ_CFG; \
tmpreg |= REMAP_PIN; \
AFIO->MAPR = tmpreg; \
}while(0u)
#define AFIO_REMAP_DISABLE(REMAP_PIN) do{ uint32_t tmpreg = AFIO->MAPR; \
tmpreg |= AFIO_MAPR_SWJ_CFG; \
tmpreg &= ~REMAP_PIN; \
AFIO->MAPR = tmpreg; \
}while(0u)
#define AFIO_REMAP_PARTIAL(REMAP_PIN, REMAP_PIN_MASK) do{ uint32_t tmpreg = AFIO->MAPR; \
tmpreg &= ~REMAP_PIN_MASK; \
tmpreg |= AFIO_MAPR_SWJ_CFG; \
tmpreg |= REMAP_PIN; \
AFIO->MAPR = tmpreg; \
}while(0u)
#define AFIO_DBGAFR_CONFIG(DBGAFR_SWJCFG) do{ uint32_t tmpreg = AFIO->MAPR; \
tmpreg &= ~AFIO_MAPR_SWJ_CFG_Msk; \
tmpreg |= DBGAFR_SWJCFG; \
AFIO->MAPR = tmpreg; \
}while(0u)
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup GPIOEx_Exported_Functions
* @{
*/
/** @addtogroup GPIOEx_Exported_Functions_Group1
* @{
*/
void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource);
void HAL_GPIOEx_EnableEventout(void);
void HAL_GPIOEx_DisableEventout(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F1xx_HAL_GPIO_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

388
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h Normal file
View File

@@ -0,0 +1,388 @@
/**
******************************************************************************
* @file stm32f1xx_hal_pwr.h
* @author MCD Application Team
* @brief Header file of PWR HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_PWR_H
#define __STM32F1xx_HAL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Types PWR Exported Types
* @{
*/
/**
* @brief PWR PVD configuration structure definition
*/
typedef struct
{
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
This parameter can be a value of @ref PWR_PVD_detection_level */
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWR_PVD_Mode */
}PWR_PVDTypeDef;
/**
* @}
*/
/* Internal constants --------------------------------------------------------*/
/** @addtogroup PWR_Private_Constants
* @{
*/
#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
* @{
*/
#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2
#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3
#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4
#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5
#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6
#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7
#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8
#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9
/**
* @}
*/
/** @defgroup PWR_PVD_Mode PWR PVD Mode
* @{
*/
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
* @{
*/
#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode
* @{
*/
#define PWR_MAINREGULATOR_ON 0x00000000U
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
/**
* @}
*/
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
* @{
*/
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
* @{
*/
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup PWR_Flag PWR Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Macros PWR Exported Macros
* @{
*/
/** @brief Check PWR flag is set or not.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
* was received from the WKUP pin or from the RTC alarm
* An additional wakeup event is detected if the WKUP pin is enabled
* (by setting the EWUP bit) when the WKUP pin level is already high.
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
* resumed from StandBy mode.
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
* For this reason, this bit is equal to 0 after Standby or reset
* until the PVDE bit is set.
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
/** @brief Clear the PWR's pending flags.
* @param __FLAG__: specifies the flag to clear.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag
* @arg PWR_FLAG_SB: StandBy flag
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2))
/**
* @brief Enable interrupt on PVD Exti Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
/**
* @brief Disable interrupt on PVD Exti Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
/**
* @brief Enable event on PVD Exti Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
/**
* @brief Disable event on PVD Exti Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
/**
* @brief PVD EXTI line configuration: set falling edge trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
/**
* @brief PVD EXTI line configuration: set rising edge trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Extended Interrupt Rising Trigger.
* This parameter can be:
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
/**
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
/**
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
* This parameter can be:
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
/**
* @brief Check whether the specified PVD EXTI interrupt flag is set or not.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
/**
* @brief Clear the PVD EXTI flag.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/** @defgroup PWR_Private_Macros PWR Private Macros
* @{
*/
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
((MODE) == PWR_PVD_MODE_NORMAL))
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1))
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions *******************************/
void HAL_PWR_DeInit(void);
void HAL_PWR_EnableBkUpAccess(void);
void HAL_PWR_DisableBkUpAccess(void);
/**
* @}
*/
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
/* #define HAL_PWR_ConfigPVD 12*/
void HAL_PWR_EnablePVD(void);
void HAL_PWR_DisablePVD(void);
/* WakeUp pins configuration functions ****************************************/
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
/* Low Power modes configuration functions ************************************/
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
void HAL_PWR_EnterSTANDBYMode(void);
void HAL_PWR_EnableSleepOnExit(void);
void HAL_PWR_DisableSleepOnExit(void);
void HAL_PWR_EnableSEVOnPend(void);
void HAL_PWR_DisableSEVOnPend(void);
void HAL_PWR_PVD_IRQHandler(void);
void HAL_PWR_PVDCallback(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_PWR_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1378
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h Normal file
View File

File diff suppressed because it is too large Load Diff

1908
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h Normal file
View File

File diff suppressed because it is too large Load Diff

607
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h Normal file
View File

@@ -0,0 +1,607 @@
/**
******************************************************************************
* @file stm32f1xx_hal_rtc.h
* @author MCD Application Team
* @brief Header file of RTC HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_RTC_H
#define __STM32F1xx_HAL_RTC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup RTC
* @{
*/
/** @addtogroup RTC_Private_Macros
* @{
*/
#define IS_RTC_ASYNCH_PREDIV(PREDIV) (((PREDIV) <= 0xFFFFFU) || ((PREDIV) == RTC_AUTO_1_SECOND))
#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U)
#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U)
#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U)
#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U)
#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U))
#define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U))
#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_ALARM_A)
#define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUTSOURCE_NONE) || \
((__OUTPUT__) == RTC_OUTPUTSOURCE_CALIBCLOCK) || \
((__OUTPUT__) == RTC_OUTPUTSOURCE_ALARM) || \
((__OUTPUT__) == RTC_OUTPUTSOURCE_SECOND))
/**
* @}
*/
/** @addtogroup RTC_Private_Constants
* @{
*/
/** @defgroup RTC_Timeout_Value Default Timeout Value
* @{
*/
#define RTC_TIMEOUT_VALUE 1000U
/**
* @}
*/
/** @defgroup RTC_EXTI_Line_Event RTC EXTI Line event
* @{
*/
#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */
/**
* @}
*/
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RTC_Exported_Types RTC Exported Types
* @{
*/
/**
* @brief RTC Time structure definition
*/
typedef struct
{
uint8_t Hours; /*!< Specifies the RTC Time Hour.
This parameter must be a number between Min_Data = 0 and Max_Data = 23 */
uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
} RTC_TimeTypeDef;
/**
* @brief RTC Alarm structure definition
*/
typedef struct
{
RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
uint32_t Alarm; /*!< Specifies the alarm ID (only 1 alarm ID for STM32F1).
This parameter can be a value of @ref RTC_Alarms_Definitions */
} RTC_AlarmTypeDef;
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */
HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */
HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */
HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */
HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */
} HAL_RTCStateTypeDef;
/**
* @brief RTC Configuration Structure definition
*/
typedef struct
{
uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF or RTC_AUTO_1_SECOND
If RTC_AUTO_1_SECOND is selected, AsynchPrediv will be set automatically to get 1sec timebase */
uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC Tamper pin.
This parameter can be a value of @ref RTC_output_source_to_output_on_the_Tamper_pin */
} RTC_InitTypeDef;
/**
* @brief RTC Date structure definition
*/
typedef struct
{
uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay (not necessary for HAL_RTC_SetDate).
This parameter can be a value of @ref RTC_WeekDay_Definitions */
uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
This parameter can be a value of @ref RTC_Month_Date_Definitions */
uint8_t Date; /*!< Specifies the RTC Date.
This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
uint8_t Year; /*!< Specifies the RTC Date Year.
This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
} RTC_DateTypeDef;
/**
* @brief Time Handle Structure definition
*/
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
typedef struct __RTC_HandleTypeDef
#else
typedef struct
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
{
RTC_TypeDef *Instance; /*!< Register base address */
RTC_InitTypeDef Init; /*!< RTC required parameters */
RTC_DateTypeDef DateToUpdate; /*!< Current date set by user and updated automatically */
HAL_LockTypeDef Lock; /*!< RTC locking object */
__IO HAL_RTCStateTypeDef State; /*!< Time communication state */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */
void (* Tamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */
void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */
void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
} RTC_HandleTypeDef;
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/**
* @brief HAL RTC Callback ID enumeration definition
*/
typedef enum
{
HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00u, /*!< RTC Alarm A Event Callback ID */
HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04u, /*!< RTC Tamper 1 Callback ID */
HAL_RTC_MSPINIT_CB_ID = 0x0Eu, /*!< RTC Msp Init callback ID */
HAL_RTC_MSPDEINIT_CB_ID = 0x0Fu /*!< RTC Msp DeInit callback ID */
} HAL_RTC_CallbackIDTypeDef;
/**
* @brief HAL RTC Callback pointer definition
*/
typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTC_Exported_Constants RTC Exported Constants
* @{
*/
/** @defgroup RTC_Automatic_Prediv_1_Second Automatic calculation of prediv for 1sec timebase
* @{
*/
#define RTC_AUTO_1_SECOND 0xFFFFFFFFU
/**
* @}
*/
/** @defgroup RTC_Input_parameter_format_definitions Input Parameter Format
* @{
*/
#define RTC_FORMAT_BIN 0x000000000U
#define RTC_FORMAT_BCD 0x000000001U
/**
* @}
*/
/** @defgroup RTC_Month_Date_Definitions Month Definitions
* @{
*/
/* Coded in BCD format */
#define RTC_MONTH_JANUARY ((uint8_t)0x01)
#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
#define RTC_MONTH_MARCH ((uint8_t)0x03)
#define RTC_MONTH_APRIL ((uint8_t)0x04)
#define RTC_MONTH_MAY ((uint8_t)0x05)
#define RTC_MONTH_JUNE ((uint8_t)0x06)
#define RTC_MONTH_JULY ((uint8_t)0x07)
#define RTC_MONTH_AUGUST ((uint8_t)0x08)
#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
/**
* @}
*/
/** @defgroup RTC_WeekDay_Definitions WeekDay Definitions
* @{
*/
#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup RTC_Alarms_Definitions Alarms Definitions
* @{
*/
#define RTC_ALARM_A 0U /*!< Specify alarm ID (mainly for legacy purposes) */
/**
* @}
*/
/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin Output source to output on the Tamper pin
* @{
*/
#define RTC_OUTPUTSOURCE_NONE 0x00000000U /*!< No output on the TAMPER pin */
#define RTC_OUTPUTSOURCE_CALIBCLOCK BKP_RTCCR_CCO /*!< RTC clock with a frequency divided by 64 on the TAMPER pin */
#define RTC_OUTPUTSOURCE_ALARM BKP_RTCCR_ASOE /*!< Alarm pulse signal on the TAMPER pin */
#define RTC_OUTPUTSOURCE_SECOND (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE) /*!< Second pulse signal on the TAMPER pin */
/**
* @}
*/
/** @defgroup RTC_Interrupts_Definitions Interrupts Definitions
* @{
*/
#define RTC_IT_OW RTC_CRH_OWIE /*!< Overflow interrupt */
#define RTC_IT_ALRA RTC_CRH_ALRIE /*!< Alarm interrupt */
#define RTC_IT_SEC RTC_CRH_SECIE /*!< Second interrupt */
#define RTC_IT_TAMP1 BKP_CSR_TPIE /*!< TAMPER Pin interrupt enable */
/**
* @}
*/
/** @defgroup RTC_Flags_Definitions Flags Definitions
* @{
*/
#define RTC_FLAG_RTOFF RTC_CRL_RTOFF /*!< RTC Operation OFF flag */
#define RTC_FLAG_RSF RTC_CRL_RSF /*!< Registers Synchronized flag */
#define RTC_FLAG_OW RTC_CRL_OWF /*!< Overflow flag */
#define RTC_FLAG_ALRAF RTC_CRL_ALRF /*!< Alarm flag */
#define RTC_FLAG_SEC RTC_CRL_SECF /*!< Second flag */
#define RTC_FLAG_TAMP1F BKP_CSR_TEF /*!< Tamper Interrupt Flag */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup RTC_Exported_macros RTC Exported Macros
* @{
*/
/** @brief Reset RTC handle state
* @param __HANDLE__: RTC handle.
* @retval None
*/
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\
(__HANDLE__)->State = HAL_RTC_STATE_RESET;\
(__HANDLE__)->MspInitCallback = NULL;\
(__HANDLE__)->MspDeInitCallback = NULL;\
}while(0u)
#else
#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
/**
* @brief Disable the write protection for RTC registers.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF)
/**
* @brief Enable the write protection for RTC registers.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF)
/**
* @brief Enable the RTC Alarm interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Disable the RTC Alarm interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Check whether the specified RTC Alarm interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be checked
* This parameter can be:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Alarm's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_ALRAF
* @retval None
*/
#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @brief Check whether the specified RTC Alarm interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.
* This parameter can be:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CRL) & (__INTERRUPT__)) != RESET)? SET : RESET)
/**
* @brief Clear the RTC Alarm's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_ALRAF
* @retval None
*/
#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) &= ~(__FLAG__)
/**
* @brief Enable interrupt on ALARM Exti Line 17.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable interrupt on ALARM Exti Line 17.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Enable event on ALARM Exti Line 17.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable event on ALARM Exti Line 17.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief ALARM EXTI line configuration: set falling edge trigger.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable the ALARM Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief ALARM EXTI line configuration: set rising edge trigger.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable the ALARM Extended Interrupt Rising Trigger.
* This parameter can be:
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief ALARM EXTI line configuration: set rising & falling edge trigger.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() \
do{ \
__HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \
__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the ALARM Extended Interrupt Rising & Falling Trigger.
* This parameter can be:
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() \
do{ \
__HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE(); \
__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Check whether the specified ALARM EXTI interrupt flag is set or not.
* @retval EXTI ALARM Line Status.
*/
#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & (RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Clear the ALARM EXTI flag.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = (RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Generate a Software interrupt on selected EXTI line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, RTC_EXTI_LINE_ALARM_EVENT)
/**
* @}
*/
/* Include RTC HAL Extension module */
#include "stm32f1xx_hal_rtc_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RTC_Exported_Functions
* @{
*/
/* Initialization and de-initialization functions ****************************/
/** @addtogroup RTC_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
/**
* @}
*/
/* RTC Time and Date functions ************************************************/
/** @addtogroup RTC_Exported_Functions_Group2
* @{
*/
HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
/**
* @}
*/
/* RTC Alarm functions ********************************************************/
/** @addtogroup RTC_Exported_Functions_Group3
* @{
*/
HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/* Peripheral State functions *************************************************/
/** @addtogroup RTC_Exported_Functions_Group4
* @{
*/
HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/* Peripheral Control functions ***********************************************/
/** @addtogroup RTC_Exported_Functions_Group5
* @{
*/
HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_RTC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

412
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h Normal file
View File

@@ -0,0 +1,412 @@
/**
******************************************************************************
* @file stm32f1xx_hal_rtc_ex.h
* @author MCD Application Team
* @brief Header file of RTC HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_RTC_EX_H
#define __STM32F1xx_HAL_RTC_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup RTCEx
* @{
*/
/** @addtogroup RTCEx_Private_Macros
* @{
*/
/** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy
* @{
*/
#define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler
/**
* @}
*/
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
* @{
*/
#define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1)
#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
#if RTC_BKP_NUMBER > 10U
#define IS_RTC_BKP(BKP) (((BKP) <= (uint32_t)RTC_BKP_DR10) || (((BKP) >= (uint32_t)RTC_BKP_DR11) && ((BKP) <= (uint32_t)RTC_BKP_DR42)))
#else
#define IS_RTC_BKP(BKP) ((BKP) <= (uint32_t)RTC_BKP_NUMBER)
#endif
#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007FU)
/**
* @}
*/
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
* @{
*/
/**
* @brief RTC Tamper structure definition
*/
typedef struct
{
uint32_t Tamper; /*!< Specifies the Tamper Pin.
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
} RTC_TamperTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
* @{
*/
/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions
* @{
*/
#define RTC_TAMPER_1 BKP_CR_TPE /*!< Select tamper to be enabled (mainly for legacy purposes) */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions
* @{
*/
#define RTC_TAMPERTRIGGER_LOWLEVEL BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
#define RTC_TAMPERTRIGGER_HIGHLEVEL 0x00000000U /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
/**
* @}
*/
/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions
* @{
*/
#if RTC_BKP_NUMBER > 0U
#define RTC_BKP_DR1 0x00000001U
#define RTC_BKP_DR2 0x00000002U
#define RTC_BKP_DR3 0x00000003U
#define RTC_BKP_DR4 0x00000004U
#define RTC_BKP_DR5 0x00000005U
#define RTC_BKP_DR6 0x00000006U
#define RTC_BKP_DR7 0x00000007U
#define RTC_BKP_DR8 0x00000008U
#define RTC_BKP_DR9 0x00000009U
#define RTC_BKP_DR10 0x0000000AU
#endif /* RTC_BKP_NUMBER > 0 */
#if RTC_BKP_NUMBER > 10U
#define RTC_BKP_DR11 0x00000010U
#define RTC_BKP_DR12 0x00000011U
#define RTC_BKP_DR13 0x00000012U
#define RTC_BKP_DR14 0x00000013U
#define RTC_BKP_DR15 0x00000014U
#define RTC_BKP_DR16 0x00000015U
#define RTC_BKP_DR17 0x00000016U
#define RTC_BKP_DR18 0x00000017U
#define RTC_BKP_DR19 0x00000018U
#define RTC_BKP_DR20 0x00000019U
#define RTC_BKP_DR21 0x0000001AU
#define RTC_BKP_DR22 0x0000001BU
#define RTC_BKP_DR23 0x0000001CU
#define RTC_BKP_DR24 0x0000001DU
#define RTC_BKP_DR25 0x0000001EU
#define RTC_BKP_DR26 0x0000001FU
#define RTC_BKP_DR27 0x00000020U
#define RTC_BKP_DR28 0x00000021U
#define RTC_BKP_DR29 0x00000022U
#define RTC_BKP_DR30 0x00000023U
#define RTC_BKP_DR31 0x00000024U
#define RTC_BKP_DR32 0x00000025U
#define RTC_BKP_DR33 0x00000026U
#define RTC_BKP_DR34 0x00000027U
#define RTC_BKP_DR35 0x00000028U
#define RTC_BKP_DR36 0x00000029U
#define RTC_BKP_DR37 0x0000002AU
#define RTC_BKP_DR38 0x0000002BU
#define RTC_BKP_DR39 0x0000002CU
#define RTC_BKP_DR40 0x0000002DU
#define RTC_BKP_DR41 0x0000002EU
#define RTC_BKP_DR42 0x0000002FU
#endif /* RTC_BKP_NUMBER > 10 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
* @{
*/
/**
* @brief Enable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP1: Tamper A interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__))
/**
* @brief Disable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP1: Tamper A interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(BKP->CSR, (__INTERRUPT__))
/**
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
* This parameter can be:
* @arg RTC_IT_TAMP1
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Tamper's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Tamper's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
* This parameter can be:
* @arg RTC_IT_TAMP1
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET)
/**
* @brief Clear the RTC Tamper's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F
* @retval None
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI)
/**
* @brief Enable the RTC Second interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled
* This parameter can be any combination of the following values:
* @arg RTC_IT_SEC: Second A interrupt
* @retval None
*/
#define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Disable the RTC Second interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_SEC: Second A interrupt
* @retval None
*/
#define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Check whether the specified RTC Second interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_IT_SEC: Second A interrupt
* @retval None
*/
#define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Second's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_SEC
* @retval None
*/
#define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @brief Clear the RTC Second's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_SEC
* @retval None
*/
#define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) &= ~(__FLAG__)
/**
* @brief Enable the RTC Overflow interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled
* This parameter can be any combination of the following values:
* @arg RTC_IT_OW: Overflow A interrupt
* @retval None
*/
#define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Disable the RTC Overflow interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_OW: Overflow A interrupt
* @retval None
*/
#define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
/**
* @brief Check whether the specified RTC Overflow interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_IT_OW: Overflow A interrupt
* @retval None
*/
#define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET)
/**
* @brief Get the selected RTC Overflow's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_OW
* @retval None
*/
#define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @brief Clear the RTC Overflow's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
* This parameter can be:
* @arg RTC_FLAG_OW
* @retval None
*/
#define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RTCEx_Exported_Functions
* @{
*/
/* RTC Tamper functions *****************************************/
/** @addtogroup RTCEx_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
/**
* @}
*/
/* RTC Second functions *****************************************/
/** @addtogroup RTCEx_Exported_Functions_Group2
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/* Extension Control functions ************************************************/
/** @addtogroup RTCEx_Exported_Functions_Group3
* @{
*/
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_RTC_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

761
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_sd.h Normal file
View File

@@ -0,0 +1,761 @@
/**
******************************************************************************
* @file stm32f1xx_hal_sd.h
* @author MCD Application Team
* @brief Header file of SD HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F1xx_HAL_SD_H
#define STM32F1xx_HAL_SD_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(SDIO)
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_ll_sdmmc.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @defgroup SD SD
* @brief SD HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup SD_Exported_Types SD Exported Types
* @{
*/
/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure
* @{
*/
typedef enum
{
HAL_SD_STATE_RESET = 0x00000000U, /*!< SD not yet initialized or disabled */
HAL_SD_STATE_READY = 0x00000001U, /*!< SD initialized and ready for use */
HAL_SD_STATE_TIMEOUT = 0x00000002U, /*!< SD Timeout state */
HAL_SD_STATE_BUSY = 0x00000003U, /*!< SD process ongoing */
HAL_SD_STATE_PROGRAMMING = 0x00000004U, /*!< SD Programming State */
HAL_SD_STATE_RECEIVING = 0x00000005U, /*!< SD Receiving State */
HAL_SD_STATE_TRANSFER = 0x00000006U, /*!< SD Transfer State */
HAL_SD_STATE_ERROR = 0x0000000FU /*!< SD is in error state */
}HAL_SD_StateTypeDef;
/**
* @}
*/
/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure
* @{
*/
typedef uint32_t HAL_SD_CardStateTypeDef;
#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */
#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */
#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */
#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */
#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */
#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */
#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */
#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */
#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */
/**
* @}
*/
/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition
* @{
*/
#define SD_InitTypeDef SDIO_InitTypeDef
#define SD_TypeDef SDIO_TypeDef
/**
* @brief SD Card Information Structure definition
*/
typedef struct
{
uint32_t CardType; /*!< Specifies the card Type */
uint32_t CardVersion; /*!< Specifies the card version */
uint32_t Class; /*!< Specifies the class of the card class */
uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
uint32_t BlockSize; /*!< Specifies one block size in bytes */
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
}HAL_SD_CardInfoTypeDef;
/**
* @brief SD handle Structure definition
*/
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
typedef struct __SD_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
{
SD_TypeDef *Instance; /*!< SD registers base address */
SD_InitTypeDef Init; /*!< SD required parameters */
HAL_LockTypeDef Lock; /*!< SD locking object */
uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */
uint32_t TxXferSize; /*!< SD Tx Transfer size */
uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */
uint32_t RxXferSize; /*!< SD Rx Transfer size */
__IO uint32_t Context; /*!< SD transfer context */
__IO HAL_SD_StateTypeDef State; /*!< SD card State */
__IO uint32_t ErrorCode; /*!< SD Card Error codes */
DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */
uint32_t CSD[4]; /*!< SD card specific data table */
uint32_t CID[4]; /*!< SD card identification number table */
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd);
void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd);
void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd);
void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd);
void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd);
void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd);
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
}SD_HandleTypeDef;
/**
* @}
*/
/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register
* @{
*/
typedef struct
{
__IO uint8_t CSDStruct; /*!< CSD structure */
__IO uint8_t SysSpecVersion; /*!< System specification version */
__IO uint8_t Reserved1; /*!< Reserved */
__IO uint8_t TAAC; /*!< Data read access time 1 */
__IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
__IO uint16_t CardComdClasses; /*!< Card command classes */
__IO uint8_t RdBlockLen; /*!< Max. read data block length */
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
__IO uint8_t DSRImpl; /*!< DSR implemented */
__IO uint8_t Reserved2; /*!< Reserved */
__IO uint32_t DeviceSize; /*!< Device Size */
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
__IO uint8_t EraseGrSize; /*!< Erase group size */
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
__IO uint8_t WrSpeedFact; /*!< Write speed factor */
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
__IO uint8_t Reserved3; /*!< Reserved */
__IO uint8_t ContentProtectAppli; /*!< Content protection application */
__IO uint8_t FileFormatGroup; /*!< File format group */
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
__IO uint8_t PermWrProtect; /*!< Permanent write protection */
__IO uint8_t TempWrProtect; /*!< Temporary write protection */
__IO uint8_t FileFormat; /*!< File format */
__IO uint8_t ECC; /*!< ECC code */
__IO uint8_t CSD_CRC; /*!< CSD CRC */
__IO uint8_t Reserved4; /*!< Always 1 */
}HAL_SD_CardCSDTypeDef;
/**
* @}
*/
/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register
* @{
*/
typedef struct
{
__IO uint8_t ManufacturerID; /*!< Manufacturer ID */
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
__IO uint32_t ProdName1; /*!< Product Name part1 */
__IO uint8_t ProdName2; /*!< Product Name part2 */
__IO uint8_t ProdRev; /*!< Product Revision */
__IO uint32_t ProdSN; /*!< Product Serial Number */
__IO uint8_t Reserved1; /*!< Reserved1 */
__IO uint16_t ManufactDate; /*!< Manufacturing Date */
__IO uint8_t CID_CRC; /*!< CID CRC */
__IO uint8_t Reserved2; /*!< Always 1 */
}HAL_SD_CardCIDTypeDef;
/**
* @}
*/
/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13
* @{
*/
typedef struct
{
__IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
__IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
__IO uint16_t CardType; /*!< Carries information about card type */
__IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
__IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
__IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
__IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
__IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
__IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
__IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
}HAL_SD_CardStatusTypeDef;
/**
* @}
*/
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition
* @{
*/
typedef enum
{
HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */
HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */
HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */
HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */
HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */
HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */
}HAL_SD_CallbackIDTypeDef;
/**
* @}
*/
/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition
* @{
*/
typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd);
/**
* @}
*/
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SD_Exported_Constants Exported Constants
* @{
*/
#define BLOCKSIZE 512U /*!< Block size is 512 bytes */
/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
* @{
*/
#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
number of transferred bytes does not match the block length */
#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
command or if there was an attempt to access a locked card */
#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
of erase sequence command was received */
#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
* @{
*/
#define SD_CONTEXT_NONE 0x00000000U /*!< None */
#define SD_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
#define SD_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
#define SD_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
#define SD_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
#define SD_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
/**
* @}
*/
/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
* @{
*/
#define CARD_SDSC 0x00000000U /*!< SD Standard Capacity <2Go */
#define CARD_SDHC_SDXC 0x00000001U /*!< SD High Capacity <32Go, SD Extended Capacity <2To */
#define CARD_SECURED 0x00000003U
/**
* @}
*/
/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
* @{
*/
#define CARD_V1_X 0x00000000U
#define CARD_V2_X 0x00000001U
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup SD_Exported_macros SD Exported Macros
* @brief macros to handle interrupts and specific clock configurations
* @{
*/
/** @brief Reset SD handle state.
* @param __HANDLE__ : SD handle.
* @retval None
*/
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \
(__HANDLE__)->State = HAL_SD_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET)
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
/**
* @brief Enable the SD device.
* @retval None
*/
#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
/**
* @brief Disable the SD device.
* @retval None
*/
#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
/**
* @brief Enable the SDMMC DMA transfer.
* @retval None
*/
#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
/**
* @brief Disable the SDMMC DMA transfer.
* @retval None
*/
#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
/**
* @brief Enable the SD device interrupt.
* @param __HANDLE__: SD Handle
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
* This parameter can be one or a combination of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
* @retval None
*/
#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
/**
* @brief Disable the SD device interrupt.
* @param __HANDLE__: SD Handle
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
* This parameter can be one or a combination of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
* @retval None
*/
#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
/**
* @brief Check whether the specified SD flag is set or not.
* @param __HANDLE__: SD Handle
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
* @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
* @arg SDIO_FLAG_CMDACT: Command transfer in progress
* @arg SDIO_FLAG_TXACT: Data transmit in progress
* @arg SDIO_FLAG_RXACT: Data receive in progress
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
* @arg SDIO_FLAG_SDIOIT: SDIO interrupt received
* @retval The new state of SD FLAG (SET or RESET).
*/
#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
/**
* @brief Clear the SD's pending flags.
* @param __HANDLE__: SD Handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be one or a combination of the following values:
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
* @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
* @arg SDIO_FLAG_SDIOIT: SDIO interrupt received
* @retval None
*/
#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
/**
* @brief Check whether the specified SD interrupt has occurred or not.
* @param __HANDLE__: SD Handle
* @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
* This parameter can be one of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
* @retval The new state of SD IT (SET or RESET).
*/
#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
/**
* @brief Clear the SD's interrupt pending bits.
* @param __HANDLE__: SD Handle
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
* This parameter can be one or a combination of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
* @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
* @retval None
*/
#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SD_Exported_Functions SD Exported Functions
* @{
*/
/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);
HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);
HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
/**
* @}
*/
/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
* @{
*/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
/* Non-Blocking mode: IT */
HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
/* Callback in non blocking modes (DMA) */
void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);
void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);
void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);
void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);
#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
/* SD callback registering/unregistering */
HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId, pSD_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId);
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
* @{
*/
HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
/**
* @}
*/
/** @defgroup SD_Exported_Functions_Group4 SD card related functions
* @{
*/
HAL_StatusTypeDef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);
HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);
HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);
HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);
HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);
/**
* @}
*/
/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions
* @{
*/
HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);
uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);
/**
* @}
*/
/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management
* @{
*/
HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);
HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/** @defgroup SD_Private_Types SD Private Types
* @{
*/
/**
* @}
*/
/* Private defines -----------------------------------------------------------*/
/** @defgroup SD_Private_Defines SD Private Defines
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup SD_Private_Variables SD Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup SD_Private_Constants SD Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup SD_Private_Macros SD Private Macros
* @{
*/
/**
* @}
*/
/* Private functions prototypes ----------------------------------------------*/
/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
* @{
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup SD_Private_Functions SD Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* SDIO */
#ifdef __cplusplus
}
#endif
#endif /* STM32F1xx_HAL_SD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2129
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h Normal file
View File

File diff suppressed because it is too large Load Diff

262
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h Normal file
View File

@@ -0,0 +1,262 @@
/**
******************************************************************************
* @file stm32f1xx_hal_tim_ex.h
* @author MCD Application Team
* @brief Header file of TIM HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F1xx_HAL_TIM_EX_H
#define STM32F1xx_HAL_TIM_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup TIMEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
* @{
*/
/**
* @brief TIM Hall sensor Configuration Structure definition
*/
typedef struct
{
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t IC1Filter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
} TIM_HallSensor_InitTypeDef;
/**
* @}
*/
/* End of exported types -----------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
* @{
*/
/** @defgroup TIMEx_Remap TIM Extended Remapping
* @{
*/
/**
* @}
*/
/**
* @}
*/
/* End of exported constants -------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
* @{
*/
/**
* @}
*/
/* End of exported macro -----------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
* @{
*/
/**
* @}
*/
/* End of private macro ------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
* @{
*/
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
* @brief Timer Hall Sensor functions
* @{
*/
/* Timer Hall Sensor functions **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
* @brief Timer Complementary Output Compare functions
* @{
*/
/* Timer Complementary Output Compare functions *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
* @brief Timer Complementary PWM functions
* @{
*/
/* Timer Complementary PWM functions ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
* @brief Timer Complementary One Pulse functions
* @{
*/
/* Timer Complementary One Pulse functions **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
* @brief Peripheral Control functions
* @{
*/
/* Extended Control functions ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
TIM_MasterConfigTypeDef *sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
* @brief Extended Callbacks functions
* @{
*/
/* Extended Callback **********************************************************/
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
* @brief Extended Peripheral State functions
* @{
*/
/* Extended Peripheral State functions ***************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN);
/**
* @}
*/
/**
* @}
*/
/* End of exported functions -------------------------------------------------*/
/* Private functions----------------------------------------------------------*/
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
* @{
*/
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/* End of private functions --------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F1xx_HAL_TIM_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

887
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h Normal file
View File

@@ -0,0 +1,887 @@
/**
******************************************************************************
* @file stm32f1xx_hal_uart.h
* @author MCD Application Team
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_UART_H
#define __STM32F1xx_HAL_UART_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup UART
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UART_Exported_Types UART Exported Types
* @{
*/
/**
* @brief UART Init Structure definition
*/
typedef struct
{
uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
The baud rate is computed using the following formula:
- IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate)))
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref UART_Word_Length */
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref UART_Stop_Bits */
uint32_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref UART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref UART_Mode */
uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
This parameter can be a value of @ref UART_Hardware_Flow_Control */
uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
This parameter can be a value of @ref UART_Over_Sampling. This feature is only available
on STM32F100xx family, so OverSampling parameter should always be set to 16. */
} UART_InitTypeDef;
/**
* @brief HAL UART State structures definition
* @note HAL UART State value is a combination of 2 different substates: gState and RxState.
* - gState contains UART state information related to global Handle management
* and also information related to Tx operations.
* gState value coding follow below described bitmap :
* b7-b6 Error information
* 00 : No Error
* 01 : (Not Used)
* 10 : Timeout
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
* 1 : Init done (Peripheral initialized. HAL UART Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
* 0 : Ready
* 1 : Busy (Peripheral busy with some configuration or internal operations)
* b1 (not used)
* x : Should be set to 0
* b0 Tx state
* 0 : Ready (no Tx operation ongoing)
* 1 : Busy (Tx operation ongoing)
* - RxState contains information related to Rx operations.
* RxState value coding follow below described bitmap :
* b7-b6 (not used)
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
* 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
* 0 : Ready (no Rx operation ongoing)
* 1 : Busy (Rx operation ongoing)
* b0 (not used)
* x : Should be set to 0.
*/
typedef enum
{
HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
Value is allowed for gState and RxState */
HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
Value is allowed for gState and RxState */
HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
Value is allowed for gState only */
HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
Value is allowed for gState only */
HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
Value is allowed for RxState only */
HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
Not to be used for neither gState nor RxState.
Value is result of combination (Or) between gState and RxState values */
HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
Value is allowed for gState only */
HAL_UART_STATE_ERROR = 0xE0U /*!< Error
Value is allowed for gState only */
} HAL_UART_StateTypeDef;
/**
* @brief HAL UART Reception type definition
* @note HAL UART Reception type value aims to identify which type of Reception is ongoing.
* It is expected to admit following values :
* HAL_UART_RECEPTION_STANDARD = 0x00U,
* HAL_UART_RECEPTION_TOIDLE = 0x01U,
*/
typedef uint32_t HAL_UART_RxTypeTypeDef;
/**
* @brief UART handle Structure definition
*/
typedef struct __UART_HandleTypeDef
{
USART_TypeDef *Instance; /*!< UART registers base address */
UART_InitTypeDef Init; /*!< UART communication parameters */
uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
uint16_t TxXferSize; /*!< UART Tx Transfer size */
__IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
uint16_t RxXferSize; /*!< UART Rx Transfer size */
__IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
__IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */
DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
and also related to Tx operations.
This parameter can be a value of @ref HAL_UART_StateTypeDef */
__IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
This parameter can be a value of @ref HAL_UART_StateTypeDef */
__IO uint32_t ErrorCode; /*!< UART Error code */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */
void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */
void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */
void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */
void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */
void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */
void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */
void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */
void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */
void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */
void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
} UART_HandleTypeDef;
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/**
* @brief HAL UART Callback ID enumeration definition
*/
typedef enum
{
HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */
HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */
HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */
HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */
HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */
HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */
HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */
HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */
HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */
HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */
HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */
} HAL_UART_CallbackIDTypeDef;
/**
* @brief HAL UART Callback pointer definition
*/
typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UART_Exported_Constants UART Exported Constants
* @{
*/
/** @defgroup UART_Error_Code UART Error Code
* @{
*/
#define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */
#define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */
#define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */
#define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */
#define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
#define HAL_UART_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup UART_Word_Length UART Word Length
* @{
*/
#define UART_WORDLENGTH_8B 0x00000000U
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
/**
* @}
*/
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
* @{
*/
#define UART_STOPBITS_1 0x00000000U
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
/**
* @}
*/
/** @defgroup UART_Parity UART Parity
* @{
*/
#define UART_PARITY_NONE 0x00000000U
#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
/**
* @}
*/
/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
* @{
*/
#define UART_HWCONTROL_NONE 0x00000000U
#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
/**
* @}
*/
/** @defgroup UART_Mode UART Transfer Mode
* @{
*/
#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE | USART_CR1_RE))
/**
* @}
*/
/** @defgroup UART_State UART State
* @{
*/
#define UART_STATE_DISABLE 0x00000000U
#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
/**
* @}
*/
/** @defgroup UART_Over_Sampling UART Over Sampling
* @{
*/
#define UART_OVERSAMPLING_16 0x00000000U
#if defined(USART_CR1_OVER8)
#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
#endif /* USART_CR1_OVER8 */
/**
* @}
*/
/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
* @{
*/
#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
/**
* @}
*/
/** @defgroup UART_WakeUp_functions UART Wakeup Functions
* @{
*/
#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U
#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
/**
* @}
*/
/** @defgroup UART_Flags UART FLags
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the SR register
* @{
*/
#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
/**
* @}
*/
/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
* Elements values convention: 0xY000XXXX
* - XXXX : Interrupt mask (16 bits) in the Y register
* - Y : Interrupt source register (2bits)
* - 0001: CR1 register
* - 0010: CR2 register
* - 0011: CR3 register
* @{
*/
#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
/**
* @}
*/
/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values
* @{
*/
#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */
#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup UART_Exported_Macros UART Exported Macros
* @{
*/
/** @brief Reset UART handle gstate & RxState
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0U)
#else
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
} while(0U)
#endif /*USE_HAL_UART_REGISTER_CALLBACKS */
/** @brief Flushes the UART DR register
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
*/
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
/** @brief Checks whether the specified UART flag is set or not.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
* @arg UART_FLAG_LBD: LIN Break detection flag
* @arg UART_FLAG_TXE: Transmit data register empty flag
* @arg UART_FLAG_TC: Transmission Complete flag
* @arg UART_FLAG_RXNE: Receive data register not empty flag
* @arg UART_FLAG_IDLE: Idle Line detection flag
* @arg UART_FLAG_ORE: Overrun Error flag
* @arg UART_FLAG_NE: Noise Error flag
* @arg UART_FLAG_FE: Framing Error flag
* @arg UART_FLAG_PE: Parity Error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/** @brief Clears the specified UART pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __FLAG__ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
* @arg UART_FLAG_LBD: LIN Break detection flag.
* @arg UART_FLAG_TC: Transmission Complete flag.
* @arg UART_FLAG_RXNE: Receive data register not empty flag.
*
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
* error) and IDLE (Idle line detected) flags are cleared by software
* sequence: a read operation to USART_SR register followed by a read
* operation to USART_DR register.
* @note RXNE flag can be also cleared by a read to the USART_DR register.
* @note TC flag can be also cleared by software sequence: a read operation to
* USART_SR register followed by a write operation to USART_DR register.
* @note TXE flag is cleared only by a write to the USART_DR register.
*
* @retval None
*/
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
/** @brief Clears the UART PE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
do{ \
__IO uint32_t tmpreg = 0x00U; \
tmpreg = (__HANDLE__)->Instance->SR; \
tmpreg = (__HANDLE__)->Instance->DR; \
UNUSED(tmpreg); \
} while(0U)
/** @brief Clears the UART FE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clears the UART NE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clears the UART ORE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clears the UART IDLE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Enable the specified UART interrupt.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __INTERRUPT__ specifies the UART interrupt source to enable.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_PE: Parity Error interrupt
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
/** @brief Disable the specified UART interrupt.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __INTERRUPT__ specifies the UART interrupt source to disable.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_PE: Parity Error interrupt
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
/** @brief Checks whether the specified UART interrupt source is enabled or not.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __IT__ specifies the UART interrupt source to check.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_ERR: Error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
/** @brief Enable CTS flow control
* @note This macro allows to enable CTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
do{ \
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
} while(0U)
/** @brief Disable CTS flow control
* @note This macro allows to disable CTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
do{ \
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
} while(0U)
/** @brief Enable RTS flow control
* This macro allows to enable RTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
do{ \
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
} while(0U)
/** @brief Disable RTS flow control
* This macro allows to disable RTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
do{ \
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
} while(0U)
#if defined(USART_CR3_ONEBIT)
/** @brief Macro to enable the UART's one bit sample method
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
/** @brief Macro to disable the UART's one bit sample method
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
#endif /* UART_ONE_BIT_SAMPLE_Feature */
/** @brief Enable UART
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
/** @brief Disable UART
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UART_Exported_Functions
* @{
*/
/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization/de-initialization functions **********************************/
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart);
void HAL_UART_MspInit(UART_HandleTypeDef *huart);
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
* @{
*/
/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
/* Transfer Abort functions */
HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size);
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group4
* @{
*/
/* Peripheral State functions **************************************************/
HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup UART_Private_Constants UART Private Constants
* @{
*/
/** @brief UART interruptions flag mask
*
*/
#define UART_IT_MASK 0x0000FFFFU
#define UART_CR1_REG_INDEX 1U
#define UART_CR2_REG_INDEX 2U
#define UART_CR3_REG_INDEX 3U
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UART_Private_Macros UART Private Macros
* @{
*/
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
((STOPBITS) == UART_STOPBITS_2))
#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
((PARITY) == UART_PARITY_EVEN) || \
((PARITY) == UART_PARITY_ODD))
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
(((CONTROL) == UART_HWCONTROL_NONE) || \
((CONTROL) == UART_HWCONTROL_RTS) || \
((CONTROL) == UART_HWCONTROL_CTS) || \
((CONTROL) == UART_HWCONTROL_RTS_CTS))
#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U))
#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
((STATE) == UART_STATE_ENABLE))
#if defined(USART_CR1_OVER8)
#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
((SAMPLING) == UART_OVERSAMPLING_8))
#endif /* USART_CR1_OVER8 */
#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 4500000U)
#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U)
/* UART BRR = mantissa + overflow + fraction
= (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U) + 50U) / 100U)
/* UART BRR = mantissa + overflow + fraction
= (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup UART_Private_Functions UART Private Functions
* @{
*/
HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_UART_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1015
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h Normal file
View File

File diff suppressed because it is too large Load Diff

640
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h Normal file
View File

@@ -0,0 +1,640 @@
/**
******************************************************************************
* @file stm32f1xx_ll_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL CORTEX driver contains a set of generic APIs that can be
used by user:
(+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
functions
(+) Low power mode configuration (SCB register of Cortex-MCU)
(+) MPU API to configure and enable regions
(MPU services provided only on some devices)
(+) API to access to MCU info (CPUID register)
(+) API to enable fault handler (SHCSR accesses)
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_LL_CORTEX_H
#define __STM32F1xx_LL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
/** @addtogroup STM32F1xx_LL_Driver
* @{
*/
/** @defgroup CORTEX_LL CORTEX
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
* @{
*/
#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
* @{
*/
#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */
#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */
#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */
/**
* @}
*/
#if __MPU_PRESENT
/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
* @{
*/
#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
* @{
*/
#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
* @{
*/
#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
* @{
*/
#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
* @{
*/
#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
* @{
*/
#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
* @{
*/
#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
* @{
*/
#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
* @{
*/
#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
* @{
*/
/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
* @{
*/
/**
* @brief This function checks if the Systick counter flag is active or not.
* @note It can be used in timeout function on application side.
* @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
{
return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
}
/**
* @brief Configures the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
{
if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
{
SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
else
{
CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
}
/**
* @brief Get the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
*/
__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
{
return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
/**
* @brief Enable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
{
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Disable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
{
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Checks if the SYSTICK interrupt is enabled or disabled.
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
{
return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
* @{
*/
/**
* @brief Processor uses sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleep(void)
{
/* Clear SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Processor uses deep sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
{
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
* @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
* empty main application.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
{
/* Set SLEEPONEXIT bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Do not sleep when returning to Thread mode.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
{
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
* processor.
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
{
/* Set SEVEONPEND bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
* excluded
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
{
/* Clear SEVEONPEND bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
* @{
*/
/**
* @brief Enable a fault in System handler control register (SHCSR)
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault
* @param Fault This parameter can be a combination of the following values:
* @arg @ref LL_HANDLER_FAULT_USG
* @arg @ref LL_HANDLER_FAULT_BUS
* @arg @ref LL_HANDLER_FAULT_MEM
* @retval None
*/
__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
{
/* Enable the system handler fault */
SET_BIT(SCB->SHCSR, Fault);
}
/**
* @brief Disable a fault in System handler control register (SHCSR)
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault
* @param Fault This parameter can be a combination of the following values:
* @arg @ref LL_HANDLER_FAULT_USG
* @arg @ref LL_HANDLER_FAULT_BUS
* @arg @ref LL_HANDLER_FAULT_MEM
* @retval None
*/
__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
{
/* Disable the system handler fault */
CLEAR_BIT(SCB->SHCSR, Fault);
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
* @{
*/
/**
* @brief Get Implementer code
* @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
* @retval Value should be equal to 0x41 for ARM
*/
__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
}
/**
* @brief Get Variant number (The r value in the rnpn product revision identifier)
* @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
* @retval Value between 0 and 255 (0x1: revision 1, 0x2: revision 2)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
}
/**
* @brief Get Constant number
* @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant
* @retval Value should be equal to 0xF for Cortex-M3 devices
*/
__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
}
/**
* @brief Get Part number
* @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
* @retval Value should be equal to 0xC23 for Cortex-M3
*/
__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
}
/**
* @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
* @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
* @retval Value between 0 and 255 (0x0: patch 0, 0x1: patch 1)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
}
/**
* @}
*/
#if __MPU_PRESENT
/** @defgroup CORTEX_LL_EF_MPU MPU
* @{
*/
/**
* @brief Enable MPU with input options
* @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
* @param Options This parameter can be one of the following values:
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
* @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
* @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
* @retval None
*/
__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
{
/* Enable the MPU*/
WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
/* Ensure MPU settings take effects */
__DSB();
/* Sequence instruction fetches using update settings */
__ISB();
}
/**
* @brief Disable MPU
* @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
* @retval None
*/
__STATIC_INLINE void LL_MPU_Disable(void)
{
/* Make sure outstanding transfers are done */
__DMB();
/* Disable MPU*/
WRITE_REG(MPU->CTRL, 0U);
}
/**
* @brief Check if MPU is enabled or not
* @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
{
return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
}
/**
* @brief Enable a MPU region
* @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @retval None
*/
__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Enable the MPU region */
SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
}
/**
* @brief Configure and enable a region
* @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
* MPU_RBAR REGION LL_MPU_ConfigRegion\n
* MPU_RBAR ADDR LL_MPU_ConfigRegion\n
* MPU_RASR XN LL_MPU_ConfigRegion\n
* MPU_RASR AP LL_MPU_ConfigRegion\n
* MPU_RASR S LL_MPU_ConfigRegion\n
* MPU_RASR C LL_MPU_ConfigRegion\n
* MPU_RASR B LL_MPU_ConfigRegion\n
* MPU_RASR SIZE LL_MPU_ConfigRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @param Address Value of region base address
* @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
* @param Attributes This parameter can be a combination of the following values:
* @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
* or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
* or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
* or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
* or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
* or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
* @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
* or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
* @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
* @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
* @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
* @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
* @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
* @retval None
*/
__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Set base address */
WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
/* Configure MPU */
WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
}
/**
* @brief Disable a region
* @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
* MPU_RASR ENABLE LL_MPU_DisableRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @retval None
*/
__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Disable the MPU region */
CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
}
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_LL_CORTEX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1960
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h Normal file
View File

File diff suppressed because it is too large Load Diff

888
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h Normal file
View File

@@ -0,0 +1,888 @@
/**
******************************************************************************
* @file stm32f1xx_ll_exti.h
* @author MCD Application Team
* @brief Header file of EXTI LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F1xx_LL_EXTI_H
#define STM32F1xx_LL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
/** @addtogroup STM32F1xx_LL_Driver
* @{
*/
#if defined (EXTI)
/** @defgroup EXTI_LL EXTI
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private Macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
* @{
*/
typedef struct
{
uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
} LL_EXTI_InitTypeDef;
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_LL_EC_LINE LINE
* @{
*/
#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
#if defined(EXTI_IMR_IM16)
#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
#endif
#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
#if defined(EXTI_IMR_IM18)
#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
#endif
#if defined(EXTI_IMR_IM19)
#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
#endif
#if defined(EXTI_IMR_IM20)
#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
#endif
#if defined(EXTI_IMR_IM21)
#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
#endif
#if defined(EXTI_IMR_IM22)
#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
#endif
#if defined(EXTI_IMR_IM23)
#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
#endif
#if defined(EXTI_IMR_IM24)
#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
#endif
#if defined(EXTI_IMR_IM25)
#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
#endif
#if defined(EXTI_IMR_IM26)
#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
#endif
#if defined(EXTI_IMR_IM27)
#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
#endif
#if defined(EXTI_IMR_IM28)
#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
#endif
#if defined(EXTI_IMR_IM29)
#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
#endif
#if defined(EXTI_IMR_IM30)
#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
#endif
#if defined(EXTI_IMR_IM31)
#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
#endif
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
#if defined(USE_FULL_LL_DRIVER)
#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EC_MODE Mode
* @{
*/
#define LL_EXTI_MODE_IT ((uint8_t)0x00) /*!< Interrupt Mode */
#define LL_EXTI_MODE_EVENT ((uint8_t)0x01) /*!< Event Mode */
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02) /*!< Interrupt & Event Mode */
/**
* @}
*/
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
* @{
*/
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00) /*!< No Trigger Mode */
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01) /*!< Trigger Rising Mode */
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02) /*!< Trigger Falling Mode */
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03) /*!< Trigger Rising & Falling Mode */
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
* @{
*/
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in EXTI register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
/**
* @brief Read a value in EXTI register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
* @{
*/
/**
* @brief Enable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
* @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR, ExtiLine);
}
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR, ExtiLine);
}
/**
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
* @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR, ExtiLine);
}
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR, ExtiLine);
}
/**
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
* @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
* @{
*/
/**
* @brief Generate a software Interrupt Event for Lines in range 0 to 31
* @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR
* register (by writing a 1 into the bit)
* @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER, ExtiLine);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
* @{
*/
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
}
/**
* @brief Read ExtLine Combination Flag for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
}
/**
* @brief Clear ExtLine Flags for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
{
WRITE_REG(EXTI->PR, ExtiLine);
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
* @{
*/
uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
uint32_t LL_EXTI_DeInit(void);
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* EXTI */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F1xx_LL_EXTI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2347
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h Normal file
View File

File diff suppressed because it is too large Load Diff

440
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h Normal file
View File

@@ -0,0 +1,440 @@
/**
******************************************************************************
* @file stm32f1xx_ll_pwr.h
* @author MCD Application Team
* @brief Header file of PWR LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_LL_PWR_H
#define __STM32F1xx_LL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
/** @addtogroup STM32F1xx_LL_Driver
* @{
*/
#if defined(PWR)
/** @defgroup PWR_LL PWR
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
* @brief Flags defines which can be used with LL_PWR_WriteReg function
* @{
*/
#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */
#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */
/**
* @}
*/
/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_PWR_ReadReg function
* @{
*/
#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */
#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */
#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */
#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP /*!< Enable WKUP pin 1 */
/**
* @}
*/
/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
* @{
*/
#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */
#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */
/**
* @}
*/
/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode
* @{
*/
#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */
#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */
/**
* @}
*/
/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
* @{
*/
#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */
#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */
#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */
#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */
#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */
#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */
#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */
#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */
/**
* @}
*/
/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins
* @{
*/
#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP) /*!< WKUP pin 1 : PA0 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
* @{
*/
/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
* @{
*/
/**
* @brief Write a value in PWR register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
/**
* @brief Read a value in PWR register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
* @{
*/
/** @defgroup PWR_LL_EF_Configuration Configuration
* @{
*/
/**
* @brief Enable access to the backup domain
* @rmtoll CR DBP LL_PWR_EnableBkUpAccess
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
{
SET_BIT(PWR->CR, PWR_CR_DBP);
}
/**
* @brief Disable access to the backup domain
* @rmtoll CR DBP LL_PWR_DisableBkUpAccess
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
{
CLEAR_BIT(PWR->CR, PWR_CR_DBP);
}
/**
* @brief Check if the backup domain is enabled
* @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
{
return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
}
/**
* @brief Set voltage Regulator mode during deep sleep mode
* @rmtoll CR LPDS LL_PWR_SetRegulModeDS
* @param RegulMode This parameter can be one of the following values:
* @arg @ref LL_PWR_REGU_DSMODE_MAIN
* @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
{
MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
}
/**
* @brief Get voltage Regulator mode during deep sleep mode
* @rmtoll CR LPDS LL_PWR_GetRegulModeDS
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_REGU_DSMODE_MAIN
* @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
*/
__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
{
return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
}
/**
* @brief Set Power Down mode when CPU enters deepsleep
* @rmtoll CR PDDS LL_PWR_SetPowerMode\n
* @rmtoll CR LPDS LL_PWR_SetPowerMode
* @param PDMode This parameter can be one of the following values:
* @arg @ref LL_PWR_MODE_STOP_MAINREGU
* @arg @ref LL_PWR_MODE_STOP_LPREGU
* @arg @ref LL_PWR_MODE_STANDBY
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
{
MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
}
/**
* @brief Get Power Down mode when CPU enters deepsleep
* @rmtoll CR PDDS LL_PWR_GetPowerMode\n
* @rmtoll CR LPDS LL_PWR_GetPowerMode
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_MODE_STOP_MAINREGU
* @arg @ref LL_PWR_MODE_STOP_LPREGU
* @arg @ref LL_PWR_MODE_STANDBY
*/
__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
{
return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
}
/**
* @brief Configure the voltage threshold detected by the Power Voltage Detector
* @rmtoll CR PLS LL_PWR_SetPVDLevel
* @param PVDLevel This parameter can be one of the following values:
* @arg @ref LL_PWR_PVDLEVEL_0
* @arg @ref LL_PWR_PVDLEVEL_1
* @arg @ref LL_PWR_PVDLEVEL_2
* @arg @ref LL_PWR_PVDLEVEL_3
* @arg @ref LL_PWR_PVDLEVEL_4
* @arg @ref LL_PWR_PVDLEVEL_5
* @arg @ref LL_PWR_PVDLEVEL_6
* @arg @ref LL_PWR_PVDLEVEL_7
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
{
MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
}
/**
* @brief Get the voltage threshold detection
* @rmtoll CR PLS LL_PWR_GetPVDLevel
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_PVDLEVEL_0
* @arg @ref LL_PWR_PVDLEVEL_1
* @arg @ref LL_PWR_PVDLEVEL_2
* @arg @ref LL_PWR_PVDLEVEL_3
* @arg @ref LL_PWR_PVDLEVEL_4
* @arg @ref LL_PWR_PVDLEVEL_5
* @arg @ref LL_PWR_PVDLEVEL_6
* @arg @ref LL_PWR_PVDLEVEL_7
*/
__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
{
return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
}
/**
* @brief Enable Power Voltage Detector
* @rmtoll CR PVDE LL_PWR_EnablePVD
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnablePVD(void)
{
SET_BIT(PWR->CR, PWR_CR_PVDE);
}
/**
* @brief Disable Power Voltage Detector
* @rmtoll CR PVDE LL_PWR_DisablePVD
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisablePVD(void)
{
CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
}
/**
* @brief Check if Power Voltage Detector is enabled
* @rmtoll CR PVDE LL_PWR_IsEnabledPVD
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
{
return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
}
/**
* @brief Enable the WakeUp PINx functionality
* @rmtoll CSR EWUP LL_PWR_EnableWakeUpPin
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
{
SET_BIT(PWR->CSR, WakeUpPin);
}
/**
* @brief Disable the WakeUp PINx functionality
* @rmtoll CSR EWUP LL_PWR_DisableWakeUpPin
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
{
CLEAR_BIT(PWR->CSR, WakeUpPin);
}
/**
* @brief Check if the WakeUp PINx functionality is enabled
* @rmtoll CSR EWUP LL_PWR_IsEnabledWakeUpPin
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
{
return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
}
/**
* @}
*/
/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
* @{
*/
/**
* @brief Get Wake-up Flag
* @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
{
return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
}
/**
* @brief Get Standby Flag
* @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
{
return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
}
/**
* @brief Indicate whether VDD voltage is below the selected PVD threshold
* @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
{
return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
}
/**
* @brief Clear Standby Flag
* @rmtoll CR CSBF LL_PWR_ClearFlag_SB
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
{
SET_BIT(PWR->CR, PWR_CR_CSBF);
}
/**
* @brief Clear Wake-up Flags
* @rmtoll CR CWUF LL_PWR_ClearFlag_WU
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
{
SET_BIT(PWR->CR, PWR_CR_CWUF);
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup PWR_LL_EF_Init De-initialization function
* @{
*/
ErrorStatus LL_PWR_DeInit(void);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* defined(PWR) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_LL_PWR_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2312
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h Normal file
View File

File diff suppressed because it is too large Load Diff

1003
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rtc.h Normal file
View File

File diff suppressed because it is too large Load Diff

1115
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_sdmmc.h Normal file
View File

File diff suppressed because it is too large Load Diff

574
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h Normal file
View File

@@ -0,0 +1,574 @@
/**
******************************************************************************
* @file stm32f1xx_ll_system.h
* @author MCD Application Team
* @brief Header file of SYSTEM LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL SYSTEM driver contains a set of generic APIs that can be
used by user:
(+) Some of the FLASH features need to be handled in the SYSTEM file.
(+) Access to DBGCMU registers
(+) Access to SYSCFG registers
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_LL_SYSTEM_H
#define __STM32F1xx_LL_SYSTEM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
/** @addtogroup STM32F1xx_LL_Driver
* @{
*/
#if defined (FLASH) || defined (DBGMCU)
/** @defgroup SYSTEM_LL SYSTEM
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
* @{
*/
/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
* @{
*/
#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_CR_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_CR_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_CR_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */
#if defined(DBGMCU_CR_DBG_TIM5_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_CR_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM5_STOP */
#if defined(DBGMCU_CR_DBG_TIM6_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_CR_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM6_STOP */
#if defined(DBGMCU_CR_DBG_TIM7_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_CR_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM7_STOP */
#if defined(DBGMCU_CR_DBG_TIM12_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_CR_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM12_STOP */
#if defined(DBGMCU_CR_DBG_TIM13_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_CR_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM13_STOP */
#if defined(DBGMCU_CR_DBG_TIM14_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_CR_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM14_STOP */
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_CR_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_CR_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
#if defined(DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
#endif /* DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT */
#if defined(DBGMCU_CR_DBG_CAN1_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_CR_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */
#endif /* DBGMCU_CR_DBG_CAN1_STOP */
#if defined(DBGMCU_CR_DBG_CAN2_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_CR_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */
#endif /* DBGMCU_CR_DBG_CAN2_STOP */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_CR_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */
#if defined(DBGMCU_CR_DBG_TIM8_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_CR_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_CAN1_STOP */
#if defined(DBGMCU_CR_DBG_TIM9_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_CR_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM9_STOP */
#if defined(DBGMCU_CR_DBG_TIM10_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_CR_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM10_STOP */
#if defined(DBGMCU_CR_DBG_TIM11_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_CR_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM11_STOP */
#if defined(DBGMCU_CR_DBG_TIM15_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_CR_DBG_TIM15_STOP /*!< TIM15 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM15_STOP */
#if defined(DBGMCU_CR_DBG_TIM16_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_CR_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM16_STOP */
#if defined(DBGMCU_CR_DBG_TIM17_STOP)
#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_CR_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */
#endif /* DBGMCU_CR_DBG_TIM17_STOP */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
* @{
*/
#if defined(FLASH_ACR_LATENCY)
#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */
#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */
#else
#endif /* FLASH_ACR_LATENCY */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
* @{
*/
/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
* @{
*/
/**
* @brief Return the device identifier
* @note For Low Density devices, the device ID is 0x412
* @note For Medium Density devices, the device ID is 0x410
* @note For High Density devices, the device ID is 0x414
* @note For XL Density devices, the device ID is 0x430
* @note For Connectivity Line devices, the device ID is 0x418
* @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
* @retval Values between Min_Data=0x00 and Max_Data=0xFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
}
/**
* @brief Return the device revision identifier
* @note This field indicates the revision of the device.
For example, it is read as revA -> 0x1000,for Low Density devices
For example, it is read as revA -> 0x0000, revB -> 0x2000, revZ -> 0x2001, rev1,2,3,X or Y -> 0x2003,for Medium Density devices
For example, it is read as revA or 1 -> 0x1000, revZ -> 0x1001,rev1,2,3,X or Y -> 0x1003,for Medium Density devices
For example, it is read as revA or 1 -> 0x1003,for XL Density devices
For example, it is read as revA -> 0x1000, revZ -> 0x1001 for Connectivity line devices
* @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
}
/**
* @brief Enable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Disable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Enable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Disable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Enable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Disable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Set Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
* @param PinAssignment This parameter can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
{
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
}
/**
* @brief Get Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
* @retval Returned value can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
{
return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
}
/**
* @brief Freeze APB1 peripherals (group1 peripherals)
* @rmtoll DBGMCU_CR_APB1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_CR_APB1 DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->CR, Periphs);
}
/**
* @brief Unfreeze APB1 peripherals (group1 peripherals)
* @rmtoll DBGMCU_CR_APB1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_CR_APB1 DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->CR, Periphs);
}
/**
* @brief Freeze APB2 peripherals
* @rmtoll DBGMCU_CR_APB2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->CR, Periphs);
}
/**
* @brief Unfreeze APB2 peripherals
* @rmtoll DBGMCU_CR_APB2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_CR_APB2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP (*)
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->CR, Periphs);
}
/**
* @}
*/
#if defined(FLASH_ACR_LATENCY)
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
* @{
*/
/**
* @brief Set FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
* @param Latency This parameter can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_2
* @retval None
*/
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
{
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
}
/**
* @brief Get FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
* @retval Returned value can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_2
*/
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
{
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
}
/**
* @brief Enable Prefetch
* @rmtoll FLASH_ACR PRFTBE LL_FLASH_EnablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_PRFTBE);
}
/**
* @brief Disable Prefetch
* @rmtoll FLASH_ACR PRFTBE LL_FLASH_DisablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTBE);
}
/**
* @brief Check if Prefetch buffer is enabled
* @rmtoll FLASH_ACR PRFTBS LL_FLASH_IsPrefetchEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
{
return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTBS) == (FLASH_ACR_PRFTBS));
}
#endif /* FLASH_ACR_LATENCY */
/**
* @brief Enable Flash Half Cycle Access
* @rmtoll FLASH_ACR HLFCYA LL_FLASH_EnableHalfCycleAccess
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableHalfCycleAccess(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_HLFCYA);
}
/**
* @brief Disable Flash Half Cycle Access
* @rmtoll FLASH_ACR HLFCYA LL_FLASH_DisableHalfCycleAccess
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableHalfCycleAccess(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_HLFCYA);
}
/**
* @brief Check if Flash Half Cycle Access is enabled or not
* @rmtoll FLASH_ACR HLFCYA LL_FLASH_IsHalfCycleAccessEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_FLASH_IsHalfCycleAccessEnabled(void)
{
return (READ_BIT(FLASH->ACR, FLASH_ACR_HLFCYA) == (FLASH_ACR_HLFCYA));
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (FLASH) || defined (DBGMCU) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_LL_SYSTEM_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

3904
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_tim.h Normal file
View File

File diff suppressed because it is too large Load Diff

2569
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h Normal file
View File

File diff suppressed because it is too large Load Diff

272
Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h Normal file
View File

@@ -0,0 +1,272 @@
/**
******************************************************************************
* @file stm32f1xx_ll_utils.h
* @author MCD Application Team
* @brief Header file of UTILS LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL UTILS driver contains a set of generic APIs that can be
used by user:
(+) Device electronic signature
(+) Timing functions
(+) PLL configuration functions
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_LL_UTILS_H
#define __STM32F1xx_LL_UTILS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
/** @addtogroup STM32F1xx_LL_Driver
* @{
*/
/** @defgroup UTILS_LL UTILS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
* @{
*/
/* Max delay can be used in LL_mDelay */
#define LL_MAX_DELAY 0xFFFFFFFFU
/**
* @brief Unique device ID register base address
*/
#define UID_BASE_ADDRESS UID_BASE
/**
* @brief Flash size data register base address
*/
#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
* @{
*/
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
* @{
*/
/**
* @brief UTILS PLL structure definition
*/
typedef struct
{
uint32_t PLLMul; /*!< Multiplication factor for PLL VCO input clock.
This parameter can be a value of @ref RCC_LL_EC_PLL_MUL
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
uint32_t Prediv; /*!< Division factor for HSE used as PLL clock source.
This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
} LL_UTILS_PLLInitTypeDef;
/**
* @brief UTILS System, AHB and APB buses clock configuration structure definition
*/
typedef struct
{
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAHBPrescaler(). */
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAPB1Prescaler(). */
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAPB2Prescaler(). */
} LL_UTILS_ClkInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
* @{
*/
/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
* @{
*/
#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
* @{
*/
/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
* @{
*/
/**
* @brief Get Word0 of the unique device identifier (UID based on 96 bits)
* @retval UID[31:0]
*/
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
}
/**
* @brief Get Word1 of the unique device identifier (UID based on 96 bits)
* @retval UID[63:32]
*/
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
}
/**
* @brief Get Word2 of the unique device identifier (UID based on 96 bits)
* @retval UID[95:64]
*/
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
}
/**
* @brief Get Flash memory size
* @note This bitfield indicates the size of the device Flash memory expressed in
* Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
* @retval FLASH_SIZE[15:0]: Flash memory size
*/
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
{
return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)));
}
/**
* @}
*/
/** @defgroup UTILS_LL_EF_DELAY DELAY
* @{
*/
/**
* @brief This function configures the Cortex-M SysTick source of the time base.
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
* @note When a RTOS is used, it is recommended to avoid changing the SysTick
* configuration by calling this function, for a delay use rather osDelay RTOS service.
* @param Ticks Number of ticks
* @retval None
*/
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
{
/* Configure the SysTick to have interrupt in 1ms time base */
SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
}
void LL_Init1msTick(uint32_t HCLKFrequency);
void LL_mDelay(uint32_t Delay);
/**
* @}
*/
/** @defgroup UTILS_EF_SYSTEM SYSTEM
* @{
*/
void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
#if defined(FLASH_ACR_LATENCY)
ErrorStatus LL_SetFlashLatency(uint32_t Frequency);
#endif /* FLASH_ACR_LATENCY */
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
#if defined(RCC_PLL2_SUPPORT)
ErrorStatus LL_PLL_ConfigSystemClock_PLL2(uint32_t HSEFrequency, uint32_t HSEBypass, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_PLLInitTypeDef *UTILS_PLL2InitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
#endif /* RCC_PLL2_SUPPORT */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_LL_UTILS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/