/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file    usart.c
  * @brief   This file provides code for the configuration
  *          of the USART instances.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "usart.h"

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

UART_HandleTypeDef huart3;
DMA_HandleTypeDef hdma_usart3_rx;

/* USART3 init function */

void MX_USART3_UART_Init(void)
{

  /* USER CODE BEGIN USART3_Init 0 */

  /* USER CODE END USART3_Init 0 */

  /* USER CODE BEGIN USART3_Init 1 */
			//256000*4
  /* USER CODE END USART3_Init 1 */
  huart3.Instance = USART3;
  huart3.Init.BaudRate = 9600*2;
  huart3.Init.WordLength = UART_WORDLENGTH_8B;
  huart3.Init.StopBits = UART_STOPBITS_1;
  huart3.Init.Parity = UART_PARITY_NONE;
  huart3.Init.Mode = UART_MODE_TX_RX;
  huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart3.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart3) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART3_Init 2 */

  /* USER CODE END USART3_Init 2 */

}

void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
{

  GPIO_InitTypeDef GPIO_InitStruct = {0};
  if(uartHandle->Instance==USART3)
  {
  /* USER CODE BEGIN USART3_MspInit 0 */

  /* USER CODE END USART3_MspInit 0 */
    /* USART3 clock enable */
    __HAL_RCC_USART3_CLK_ENABLE();

    __HAL_RCC_GPIOB_CLK_ENABLE();
    /**USART3 GPIO Configuration
    PB10     ------> USART3_TX
    PB11     ------> USART3_RX
    */
    GPIO_InitStruct.Pin = GPIO_PIN_10;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = GPIO_PIN_11;
    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

    /* USART3 DMA Init */
    /* USART3_RX Init */
    hdma_usart3_rx.Instance = DMA1_Channel3;
    hdma_usart3_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
    hdma_usart3_rx.Init.PeriphInc = DMA_PINC_DISABLE;
    hdma_usart3_rx.Init.MemInc = DMA_MINC_ENABLE;
    hdma_usart3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
    hdma_usart3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
    hdma_usart3_rx.Init.Mode = DMA_CIRCULAR;
    hdma_usart3_rx.Init.Priority = DMA_PRIORITY_LOW;
    if (HAL_DMA_Init(&hdma_usart3_rx) != HAL_OK)
    {
      Error_Handler();
    }

    __HAL_LINKDMA(uartHandle,hdmarx,hdma_usart3_rx);

    /* USART3 interrupt Init */
    HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
    HAL_NVIC_EnableIRQ(USART3_IRQn);
  /* USER CODE BEGIN USART3_MspInit 1 */

  /* USER CODE END USART3_MspInit 1 */
  }
}

void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
{

  if(uartHandle->Instance==USART3)
  {
  /* USER CODE BEGIN USART3_MspDeInit 0 */

  /* USER CODE END USART3_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_USART3_CLK_DISABLE();

    /**USART3 GPIO Configuration
    PB10     ------> USART3_TX
    PB11     ------> USART3_RX
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);

    /* USART3 DMA DeInit */
    HAL_DMA_DeInit(uartHandle->hdmarx);

    /* USART3 interrupt Deinit */
    HAL_NVIC_DisableIRQ(USART3_IRQn);
  /* USER CODE BEGIN USART3_MspDeInit 1 */

  /* USER CODE END USART3_MspDeInit 1 */
  }
}

/* USER CODE BEGIN 1 */


// CUSTOM UART INIT
//void User_UART_Init(UART_HandleTypeDef* huart, DMA_HandleTypeDef *DMAhuart, struct UARTSettings *uuart)
//{ // function takes uart handler, dma handler and setting structure for init
//	
//	// get setting for uart from UARTSettings structure
//	huart->Instance = uuart->UARTx;
//  huart->Init.BaudRate = uuart->UART_Speed*2;
//	
//	// everything else is default (for now, maybe this settings would be added in UARTSettings structure later)
//  huart->Init.WordLength = UART_WORDLENGTH_8B;
//  huart->Init.StopBits = UART_STOPBITS_1;
//  huart->Init.Parity = UART_PARITY_NONE;
//  huart->Init.Mode = UART_MODE_TX_RX;
//  huart->Init.HwFlowCtl = UART_HWCONTROL_NONE;
//  huart->Init.OverSampling = UART_OVERSAMPLING_16;
//  if (HAL_UART_Init(huart) != HAL_OK)
//  {
//    Error_Handler();
//  }
//	
//	// init gpio from UARTSettings structure
//	UART_GPIO_Init(uuart->GPIOx, uuart->GPIO_PIN_RX, uuart->GPIO_PIN_TX);
//	// init dma from UARTSettings structure if need
//	if (uuart->DMAChannel != 0)
//		UART_DMA_Init(huart, DMAhuart, uuart->DMAChannel);
//}


//void UART_GPIO_Init(GPIO_TypeDef *GPIOx, uint16_t GPIO_PIN_RX, uint16_t GPIO_PIN_TX)
//{ // function takes port and pins (for rx and tx)
//  GPIO_InitTypeDef GPIO_InitStruct = {0};
//	
//	// choose port for enable clock
//	if (GPIOx==GPIOA)
//		__HAL_RCC_GPIOA_CLK_ENABLE();
//	else if (GPIOx==GPIOB)
//		__HAL_RCC_GPIOB_CLK_ENABLE();
//	else if (GPIOx==GPIOC)
//		__HAL_RCC_GPIOC_CLK_ENABLE();
//	else if (GPIOx==GPIOD)
//		__HAL_RCC_GPIOD_CLK_ENABLE();
//	
//// USART3 GPIO Configuration
////GPIO_PIN_TX ------> USART_TX
//	GPIO_InitStruct.Pin = GPIO_PIN_TX;
//	GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
//	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
//	HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);

////	GPIO_PIN_RX ------> USART_RX	
//	GPIO_InitStruct.Pin = GPIO_PIN_RX;
//	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
//	GPIO_InitStruct.Pull = GPIO_NOPULL;
//	HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);
//}


//void UART_DMA_Init(UART_HandleTypeDef *huart, DMA_HandleTypeDef *hdma_rx, DMA_Channel_TypeDef *DMAhuart)
//{ // function takes uart and dma handlers and dmachannel for uart
//	// for now only dma rx is supported, tx maybe later if needed
//	
//	/* USART3 DMA Init */
//	/* USART3_RX Init */
//	hdma_rx->Instance = DMAhuart;
//	hdma_rx->Init.Direction = DMA_PERIPH_TO_MEMORY;
//	hdma_rx->Init.PeriphInc = DMA_PINC_DISABLE;
//	hdma_rx->Init.MemInc = DMA_MINC_ENABLE;
//	hdma_rx->Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
//	hdma_rx->Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
//	hdma_rx->Init.Mode = DMA_CIRCULAR;
//	hdma_rx->Init.Priority = DMA_PRIORITY_LOW;
//	if (HAL_DMA_Init(hdma_rx) != HAL_OK)
//	{
//		Error_Handler();
//	}

//	__USER_LINKDMA(huart,hdmarx,hdma_rx); 
//	// __USER_LINKDMA is need because __HAL_LINKDMA is written for global defined hdma_rx
//	// so you get error because hal uses . insted of ->
//}



//void HAL_UART_MspInit(UART_HandleTypeDef* huart) // redefine hal function
//{ // left only rcc and interrupt init for USART_1,2,3 (maybe UART_4,5 need to be added)
//	// GPIO and DMA init was move to their own functions
//  if(huart->Instance==USART3)
//  {
//	/* USART3 clock enable */
//	__HAL_RCC_USART3_CLK_ENABLE();
//	
//	/* USART3 interrupt Init */
//	HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
//  HAL_NVIC_EnableIRQ(USART3_IRQn);
//  }
//	else if(huart->Instance==USART2)
//  {
//	/* USART3 clock enable */
//	__HAL_RCC_USART2_CLK_ENABLE();
//	
//	/* USART3 interrupt Init */
//	HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
//  HAL_NVIC_EnableIRQ(USART2_IRQn);
//  }
//	else if(huart->Instance==USART1)
//  {
//	/* USART3 clock enable */
//	__HAL_RCC_USART1_CLK_ENABLE();
//	
//	/* USART3 interrupt Init */
//	HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
//  HAL_NVIC_EnableIRQ(USART1_IRQn);
//  }
//}
/* USER CODE END 1 */