Tenocha/CAN_Request-Response_protocol
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Compare commits

merge into: Tenocha:main
Branches Tags
Tenocha:main
Tenocha:master
...
pull from: Tenocha:master
Branches Tags
Tenocha:main
Tenocha:master

No commits in common. "main" and "master" have entirely different histories.
main ... master

26 changed files with 1476 additions and 2280 deletions
Show Stats Expand all files Collapse all files

36
Core/Inc/boot_project_setup.h Normal file
View File

@ -0,0 +1,36 @@
// BOOTLOADER defines
// RCC defines
#define __RCC_UART_BOOT_CLK_ENABLE() __HAL_RCC_USART3_CLK_ENABLE()
#define __RCC_UART_PORT_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define __RCC_DMA_UART_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
#define __RCC_DMA_SDIO_CLK_ENABLE() __HAL_RCC_DMA2_CLK_ENABLE()
#define __RCC_TIM_BOOT_CLK_ENABLE() __HAL_RCC_TIM7_CLK_ENABLE()
// USART defines
#define UART_BOOT USART3 // usart
#define UART_SPEED 256000
#define UART_BOOT_IRQn USART3_IRQn
#define UART_PORT GPIOB // usart port
#define UART_PIN_TX GPIO_PIN_10
#define UART_PIN_RX GPIO_PIN_11
// DMA defines
#define DMA_UART_Channel DMA1_Channel3
#define DMA_SDIO_Channel DMA2_Channel4
#define DMA_UART_IRQn DMA1_Channel3_IRQn
#define DMA_SDIO_IRQn DMA2_Channel4_5_IRQn
// TIM defines
#define TIM_BOOT TIM7
#define TIM_BOOT_Prescaler 64000 // set up for 1 tick - 1 ms (no decrement needed)
#define TIM_BOOT_IRQn TIM7_IRQn
// SDIO defines
#define SDIO_SDCard_In_PORT GPIOB
#define SDIO_SDCard_In_PIN GPIO_PIN_5
#define SDIO_SDCard_In_IRQn EXTI9_5_IRQn

9
Core/Inc/custom_flash.h Normal file
View File

@ -0,0 +1,9 @@
#include "main.h"
#define PAGE_SIZE 2048
HAL_StatusTypeDef FLASH_Write_Page(uint32_t *Address, uint8_t *Data, int Data_size);
HAL_StatusTypeDef FLASH_Write_Word(uint32_t Address, uint64_t Data);
HAL_StatusTypeDef FLASH_Erase_App(void);
uint8_t *FLASH_Read(uint32_t add);

20
Core/Inc/custom_receive_and_write.h Normal file
View File

@ -0,0 +1,20 @@
#include "main.h"
#include "ff.h"
//#include "usart.h"
#define sizebuff 16
struct flags
{
unsigned writting:1;
};
extern struct flags flags_UART_FATFS;
FRESULT CreateAndOpenMessageFile(FIL *MessageFile, const TCHAR* path);
FRESULT OpenMessageFile(FIL *MessageFile, const TCHAR* path);
FRESULT WriteMessage(FIL *MessageFile, char *Message, UINT SizeOfMessage);
FRESULT CloseMessageFile(FIL *MessageFile);
void WriteFile(char *Data, int Num_of_Data);
void Check_USART(void);

20
Core/Inc/custom_usart.h Normal file
View File

@ -0,0 +1,20 @@
#include "main.h"
#define __USER_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
do{ \
(__HANDLE__)->__PPP_DMA_FIELD__ = (__DMA_HANDLE__); \
(__DMA_HANDLE__)->Parent = (__HANDLE__);} while(0U)
struct UARTSettings
{
USART_TypeDef *UARTx;
uint32_t UART_Speed;
GPIO_TypeDef *GPIOx;
uint16_t GPIO_PIN_RX;
uint16_t GPIO_PIN_TX;
DMA_Channel_TypeDef *DMAChannel; // DMAChannel = 0 if doesnt need
};
void User_UART_Init(UART_HandleTypeDef* huart, DMA_HandleTypeDef *DMAhuart, struct UARTSettings *uuart);
void UART_GPIO_Init(GPIO_TypeDef *GPIOx, uint16_t GPIO_PIN_RX, uint16_t GPIO_PIN_TX);
void UART_DMA_Init(UART_HandleTypeDef *huart, DMA_HandleTypeDef *hdma_rx, DMA_Channel_TypeDef *DMAhuart);

1
Core/Inc/main.h
View File

@ -31,6 +31,7 @@ extern "C" {
/* Private includes ----------------------------------------------------------*/ /* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "boot_project_setup.h"
#include "requester.h" #include "requester.h"
/* USER CODE END Includes */ /* USER CODE END Includes */

135
Core/Inc/requester.h
View File

@ -10,20 +10,8 @@
#define ONLINE 1; #define ONLINE 1;
#define OFFLINE 0; #define OFFLINE 0;
// TIM defines
#define TIM_REQUESTER_Prescaler 64000 #define TIM_REQUESTER_Prescaler 64000
//CAN Settings
#define _HCAN hcan
//CAN Speed
#define CAN_SPEED_PRSC_1000KB 2
#define CAN_SPEED_PRSC_500KB 4
#define CAN_SPEED_PRSC_250KB 8
#define CAN_SPEED_PRSC_125KB 16
#define CAN_SPEED_PRSC_50KB 40
#define CAN_CURRENT_SPEED CAN_SPEED_PRSC_250KB
//CAN Filter //CAN Filter
#define ID_MAIN_DEVICE 0x000 #define ID_MAIN_DEVICE 0x000
#define CURRENT_ID_DEVICE 0x002 #define CURRENT_ID_DEVICE 0x002
@ -34,6 +22,19 @@
#define CAN_SENSOR_TYPE_FILTER 0x00F80000 #define CAN_SENSOR_TYPE_FILTER 0x00F80000
#define CAN_SENSOR_ID_FILTER 0x0007FF00 #define CAN_SENSOR_ID_FILTER 0x0007FF00
void REQUESTER_Init(void);
void REQUESTER_MainWhile(void);
void Boot_SystemClock_Config(void);
void REQUESTER_AnalogProcessing(void);
void REQUESTER_BroadcastProcessing(void);
void REQUESTER_DiscreticProcessing(void);
void REQUESTER_ModbusProcessing(void);
void REQUESTER_RTC_SYNC(uint8_t *data);
void REQUESTER_Pulse_TIM_Handler(void);
void Boot_SystemClock_Config(void);
void REQUESTER_CAN_FILTERS(void);
union Byte{ union Byte{
struct bitfield{ struct bitfield{
unsigned bit0:1; unsigned bit0:1;
@ -74,26 +75,24 @@ _Bool IsLeapYear(uint8_t year);
#define DATA_TYPE_PULSE 0b1111 #define DATA_TYPE_PULSE 0b1111
//Sensor Types for DATA_TYPE_BROADCAST //Sensor Types for DATA_TYPE_BROADCAST
#define SENSOR_TYPE_BROADCAST_STATUS 0b00000 #define SENSOR_TYPE_STATUS 0b00000
#define SENSOR_TYPE_BROADCAST_ONOFF 0b00001 #define SENSOR_TYPE_ONOFF 0b00001
#define SENSOR_TYPE_BROADCAST_RESTARTDEVICE 0b00010 #define SENSOR_TYPE_RTCSETUP 0b00010
#define SENSOR_TYPE_BROADCAST_RTCSETUP 0b00011
//Sensor Types for DATA_TYPE_DISCRETE //Sensor Types for DATA_TYPE_DISCRETE
#define SENSOR_TYPE_DISCRETE_ACCIDENT 0b00000 #define SENSOR_TYPE_ACCIDENT 0b00000
#define SENSOR_TYPE_DISCRETE_WARNING 0b00001 #define SENSOR_TYPE_WARNING 0b00001
#define SENSOR_TYPE_DISCRETE_CONTROL_SIGNALS 0b00010 #define SENSOR_TYPE_CONTROL_SIGNALS 0b00010
#define SENSOR_TYPE_DISCRETE_FLAGS 0b00011 #define SENSOR_TYPE_FLAGS 0b00011
#define SENSOR_TYPE_DISCRETE_RESET 0b00100 #define SENSOR_TYPE_RESET 0b00100
#define SENSOR_TYPE_DISCRETE_CHANGE_MODE 0b00101 #define SENSOR_TYPE_CHANGE_MODE 0b00101
#define SENSOR_TYPE_DISCRETE_REQUEST_LIST_OF_PARAMETERS 0b00110 #define SENSOR_TYPE_REQUEST_LIST_OF_PARAMETERS 0b00110
//Sensor Types for DATA_TYPE_ANALOG //Sensor Types for DATA_TYPE_ANALOG
#define SENSOR_TYPE_ANALOG_UNIVERSAL 0b00000 #define SENSOR_TYPE_UNIVERSAL 0b00000
#define SENSOR_TYPE_ANALOG_USTAVKI 0b00001 #define SENSOR_TYPE_U 0b00001
#define SENSOR_TYPE_ANALOG_U 0b00010 #define SENSOR_TYPE_I 0b00010
#define SENSOR_TYPE_ANALOG_I 0b00011 #define SENSOR_TYPE_T 0b00011
#define SENSOR_TYPE_ANALOG_T 0b00100
//Error Code //Error Code
#define NONEXISTENT_ELEMENT 0x01 #define NONEXISTENT_ELEMENT 0x01
@ -107,7 +106,7 @@ struct controlflags{
}; };
//Device settings //Device settings
/*union ext_ID{ union ext_ID{
struct ext_ID_fields{ struct ext_ID_fields{
unsigned DeviceID:8; unsigned DeviceID:8;
unsigned SensorID:11; unsigned SensorID:11;
@ -124,33 +123,15 @@ union ext_ID_Modbus{
unsigned CountReg:8; unsigned CountReg:8;
unsigned StrAdr:8; unsigned StrAdr:8;
unsigned DataType:4; unsigned DataType:4;
unsigned Route:1; unsigned Route;
}Fields; }Fields;
unsigned int BitAll:29; unsigned int BitAll:29;
};*/ };
typedef union _extID{
struct extID_Standard_Fields{
unsigned DeviceID:8;
unsigned SensorID:11;
unsigned SensorType:5;
unsigned DataType:4;
unsigned Route:1;
}StandardFields;
struct extID_Modbus_Fields{
unsigned DeviceID:8;
unsigned CountReg:8;
unsigned StrAdr:8;
unsigned DataType:4;
unsigned Route:1;
}ModbusFields;
unsigned int BitAll:29;
}extID;
struct device struct device
{ {
unsigned Status:1; unsigned Status:1;
extID ExtID; union ext_ID ExtID;
unsigned TimeFromLastPulse; unsigned TimeFromLastPulse;
unsigned LastPulseStep; unsigned LastPulseStep;
}; };
@ -180,7 +161,7 @@ struct data
}; };
struct received_request{ struct received_request{
extID RequestedExtID; union ext_ID RequestedExtID;
unsigned RequestedDLC; unsigned RequestedDLC;
uint8_t RxData[8]; uint8_t RxData[8];
@ -240,56 +221,4 @@ struct received_request{
unsigned ModbusFlag:1; unsigned ModbusFlag:1;
}; };
#define CAN_RX_BUFFER_SIZE 128
struct RXMsg{
struct INFO{
unsigned EXT:1;
unsigned RTR:1;
}info;
extID eID;
uint16_t DLC;
uint8_t Data[8];
};
uint16_t AvailableCanRxMsg(void);
void REQUESTER_Init(void);
void REQUESTER_MainWhile(void);
void Boot_SystemClock_Config(void);
void REQUESTER_AnalogProcessing(struct RXMsg _rxMsg);
HAL_StatusTypeDef CanRequestToAnalogUniversal(struct RXMsg _rxMsg);
HAL_StatusTypeDef CanRequestToAnalogUSTAVKI(struct RXMsg _rxMsg);
HAL_StatusTypeDef CanRequestToAnalogUSens(struct RXMsg _rxMsg);
HAL_StatusTypeDef CanRequestToAnalogISens(struct RXMsg _rxMsg);
HAL_StatusTypeDef CanRequestToAnalogTSens(struct RXMsg _rxMsg);
void REQUESTER_BroadcastProcessing(struct RXMsg _rxMsg);
HAL_StatusTypeDef CanRequestToBroadcastStatus(struct RXMsg _rxMsg);
void CanRequestToBroadcastOnOff(struct RXMsg _rxMsg);
void CanRequestToBroadcastRestart(struct RXMsg _rxMsg);
void CanRequestToBroadcastRtcSetup(struct RXMsg _rxMsg);
void REQUESTER_DiscreticProcessing(struct RXMsg _rxMsg);
void CanRequestToDiscreteAccident(struct RXMsg _rxMsg);
void CanRequestToDiscreteWarning(struct RXMsg _rxMsg);
void CanRequestToDiscreteControlSignals(struct RXMsg _rxMsg);
void CanRequestToDiscreteFlags(struct RXMsg _rxMsg);
void CanRequestToDiscreteReset(struct RXMsg _rxMsg);
void CanRequestToDiscreteChangeMode(struct RXMsg _rxMsg);
void CanRequestToDiscreteRequestListOfParameters(struct RXMsg _rxMsg);
void REQUESTER_ModbusProcessing(struct RXMsg _rxMsg);
void CanRequestToModbusCoil(struct RXMsg _rxMsg);
void CanRequestToModbusDiscrete(struct RXMsg _rxMsg);
void CanRequestToModbusHolding(struct RXMsg _rxMsg);
void CanRequestToModbusInput(struct RXMsg _rxMsg);
void REQUESTER_RTC_SYNC(uint8_t *data);
void REQUESTER_Pulse_TIM_Handler(void);
void Boot_SystemClock_Config(void);
void REQUESTER_CAN_FILTERS(void);
#endif #endif

614
Core/Src/bootloader.c Normal file
View File

@ -0,0 +1,614 @@
#include "bootloader.h"
#include "custom_receive_and_write.h"
extern FLASH_EraseInitTypeDef EraseInitStruct;
struct flag FLAGS;
struct Bootloader_Errors_Counters BOOTLOADER_ERRORS_COUNTERS;
struct Bootloader_Errors BOOTLOADER_ERRORS;
uint32_t app_current_add; // address for writing pages
int cnt_tim_reset = 0; // WD Tim counter
uint8_t ReceiveDataUART[4]; // buffer for CMD
uint8_t Data2Write[PAGE_SIZE*2]; // DMA buffer for application
uint8_t CAN_Data[8];
CAN_TxHeaderTypeDef TxHeader;
CAN_RxHeaderTypeDef RxHeader;
uint32_t TxMailBox = 0; // num of used mail
extern UART_HandleTypeDef huart_boot; // uart handler for boot uart
extern DMA_HandleTypeDef hdma_usart_boot_rx; // dma handler for boot uart
struct UARTSettings UARTSet; // settings for uart
void Bootloader_Init(void)
{
HAL_Init();
Boot_SystemClock_Config();
MX_DMA_Init();
//Если используется ЮСАРТ - инициализация
#ifdef __USART_H__
UARTSet.UARTx = UART_BOOT;
UARTSet.UART_Speed = UART_SPEED;
UARTSet.GPIOx = UART_PORT;
UARTSet.GPIO_PIN_RX = UART_PIN_RX;
UARTSet.GPIO_PIN_TX = UART_PIN_TX;
UARTSet.DMAChannel = DMA_UART_Channel;
User_UART_Init(&huart_boot, &hdma_usart_boot_rx, &UARTSet);
#endif
//Если используется SD-карта - инициализация
#ifdef __SDIO_H__
BSP_SD_ITConfig();
#endif
#ifdef __CAN_H__
MX_CAN_Init();
#endif
//Инициализация светодиодов
MX_GPIO_Init();
MX_TIM7_Init();
}
HAL_StatusTypeDef res_hal;
void Bootloader_main(void) // main function, that defines bootloader behaviour
{
/*
// Настройка доступной переферии с помощью define
Bootloader_Init();
*/
/* START APPLICATION */
if (ReadKey() == BL_KEY_APP_WRITTEN)
{
// jump to main app
//Задаётся адрес программы со смещением от начала вектора прерываний
uint32_t app_jump_adr;
app_jump_adr=*((volatile uint32_t*)(MAIN_APP_START_ADR+4));
void(*GoToApp)(void);
//Деинициализация HAL
HAL_DeInit();
GoToApp = (void (*) (void)) app_jump_adr;
//Перенос вектора прерываний на начало зашитой программы
__disable_irq();
__set_MSP(*((volatile uint32_t*)MAIN_APP_START_ADR));
__enable_irq();
//Переход к выполнению зашитой программы
GoToApp();
}
else /* START PROGRAMMING MCU */
{
/* MCU Configuration for bootloader-------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash BootloaderCMD and the Systick. */
Bootloader_Init();
FLAGS.InitOrWait = 0;
// waif for commant for programming
do{
res_hal=HAL_UART_Receive_IT(&huart_boot, ReceiveDataUART, sizeof(ReceiveDataUART));
if(res_hal!=HAL_OK){
BOOTLOADER_ERRORS_COUNTERS.USART_RECEIVE++;
BOOTLOADER_ERRORS.USART_RECEIVE=1;
}
}while(res_hal!=HAL_OK); // if usart err - try start receive again
HAL_CAN_Start(&hcan);
HAL_CAN_ActivateNotification(&hcan, CAN_IT_RX_FIFO0_MSG_PENDING);
CAN_FilterTypeDef canFilterConfig;
canFilterConfig.FilterBank = 0;
canFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK;
canFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT;
canFilterConfig.FilterIdHigh = 0x0000;
canFilterConfig.FilterIdLow = 0x0000;
canFilterConfig.FilterMaskIdHigh = 0x0000;
canFilterConfig.FilterMaskIdLow = 0x0000;
canFilterConfig.FilterFIFOAssignment = CAN_RX_FIFO0;
canFilterConfig.FilterActivation = ENABLE;
canFilterConfig.SlaveStartFilterBank = 14;
HAL_CAN_ConfigFilter(&hcan, &canFilterConfig);
// FLAGS.StartInit=1;
// FLAGS.reInitMCU=1;
// FLAGS.BootloaderCMD = 2;
app_current_add = MAIN_APP_START_ADR;
// HAL_CAN_Start(&hcan);
/* Infinite loop */
while (1)
{
// HAL_Delay(10);
// HAL_UART_Transmit(&huart_boot, (uint8_t *)"000000", 6, HAL_MAX_DELAY);
// choose interface for programming
if (FLAGS.StartInit)
{
if (FLAGS.reInitMCU) // if its reInit request - erase outdate app
{
GPIOB->ODR^=0x2000;
res_hal=FLASH_Erase_App();
if(res_hal!=HAL_OK)
{
FLAGS.StartInit=1;
BOOTLOADER_ERRORS.FLASH_ERASE = 1;
continue;
}
BOOTLOADER_ERRORS.FLASH_ERASE = 0;
GPIOB->ODR^=0x2000;
FLAGS.reInitMCU = 0;
}
FLAGS.StartInit = 0;
HAL_UART_AbortReceive_IT(&huart_boot);
HAL_CAN_Stop(&hcan);
HAL_CAN_DeactivateNotification(&hcan, CAN_IT_RX_FIFO0_MSG_PENDING);
switch ((int)FLAGS.BootloaderCMD)
{
// UART
#ifdef __USART_H__
case 1:/* UART */
FLAGS.InitBootPeriph = 1;
// start receiving app.bin
res_hal = HAL_UART_Receive_DMA(&huart_boot, Data2Write, PAGE_SIZE*2);
if(res_hal!=HAL_OK)
{
FLAGS.StartInit=1;
BOOTLOADER_ERRORS_COUNTERS.USART_RECEIVE++;
BOOTLOADER_ERRORS.USART_RECEIVE = 1;
break;
}
// code of writing app in flash in callbacks functions:
// HAL_UART_RxHalfCpltCallback and HAL_UART_RxCpltCallback
break;
#endif
#ifdef __CAN_H__
// CAN
case 2: /* CAN */
// activate can and start receiving app.bin
FLAGS.InitOrWait=1;
res_hal = HAL_CAN_Start(&hcan);
res_hal = HAL_CAN_ActivateNotification(&hcan, CAN_IT_RX_FIFO0_MSG_PENDING | CAN_IT_ERROR | CAN_IT_BUSOFF | CAN_IT_LAST_ERROR_CODE);
// code of writing app in flash in callback functions:
// HAL_CAN_RxFifo0MsgPendingCallback
break;
#endif
// SD
#ifdef __SDIO_H__
case 3: /* SD */
if (FLAGS.SDCardIn==0) // wait for sd-card
{
FLAGS.StartInit=1; // if there is no card, exit programmator and go in again
BOOTLOADER_ERRORS.SD_CARD_NOT_INSERTED = 1;
//Ошибка SD карты. Начать приём новой cmd
break;
}
HAL_Delay(100); // wait for inputting SD Card
if (FLAGS.SDCardIn==0)
{
FLAGS.StartInit=1;
BOOTLOADER_ERRORS.SD_CARD_NOT_INSERTED = 1;
break;
}
FRESULT res_fresult;
SD_Programming(&res_fresult, &res_hal); // programming from sd card
// res_fresual - status for sd card read // res_hal - status for flash write
//Если всё удачно - выполнить код ниже. Если нет - StartInit = 1, break
if(res_fresult!=FR_OK || res_hal!=HAL_OK)
{
FLAGS.StartInit=1;
if(res_fresult!=FR_OK){
BOOTLOADER_ERRORS_COUNTERS.SD_CARD_READ++;
BOOTLOADER_ERRORS.SD_CARD_READ = 1;
}
if(res_hal!=HAL_OK){
BOOTLOADER_ERRORS_COUNTERS.FLASH_WRITE++;
BOOTLOADER_ERRORS.FLASH_WRITE = 1;
}
break;
}
// write Key: application in Flash, and reset MCU
{
ResetKey();
SetKey();
NVIC_SystemReset();
}// reset mcu
break;
#endif
default: // if command is incorrect - wait CMD
BOOTLOADER_ERRORS_COUNTERS.CMD_INVALID++; // uncorrect command
BOOTLOADER_ERRORS.CMD_INVALID=1;
do
{
res_hal=HAL_UART_Receive_IT(&huart_boot, ReceiveDataUART, sizeof(ReceiveDataUART));
if(res_hal!=HAL_OK){
BOOTLOADER_ERRORS_COUNTERS.USART_RECEIVE++; // err when initialize uart
BOOTLOADER_ERRORS.USART_RECEIVE=1;}
}while(res_hal!=HAL_OK);
HAL_CAN_Start(&hcan);
HAL_CAN_ActivateNotification(&hcan, CAN_IT_RX_FIFO0_MSG_PENDING);
}
}
// TxHeader.StdId = 0x200; // ID OF MESSAGE
// TxHeader.ExtId = 0; // STANDART FRAME (NOT EXTENTED)
// TxHeader.RTR = CAN_RTR_DATA; // TRANSMIT DATA OR
// TxHeader.IDE = CAN_ID_STD; // STANDART FRAME
// TxHeader.DLC = 8; // DATA SIZE
// TxHeader.TransmitGlobalTime = DISABLE; //THIS MODE IS NOT USED, SO DISABLE
// uint8_t asd[8] = "ABCDEFGL";
// while(HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0); // wait for free mail box
// res_hal = HAL_CAN_AddTxMessage(&hcan, &TxHeader, asd, &TxMailBox); // add to mail for transmit
// HAL_Delay(1000);
}
}
}
void SD_Programming(FRESULT *res_fresult, HAL_StatusTypeDef *res_hal)
{
// init peripth
MX_FATFS_Init();
MX_SDIO_SD_Init();
FIL MFile;
int SizeApp;
int AppCount;
// mount disk
uint8_t MOUNT=1;
*res_fresult = f_mount(&SDFatFS, (TCHAR const*)SDPath, 1);
if(*res_fresult != FR_OK) return;
// name of the application file
static char path[8] = "app.bin";
path[7] = '\0';
// OPEN AND READ
*res_fresult = f_open(&MFile, (const TCHAR*)path, FA_READ);
if (*res_fresult == FR_OK)
{
SizeApp = MFile.fsize;
AppCount = 0; // counter of written bytes
unsigned int bytesRead;
// reading and writing two pages
while(SizeApp - AppCount >= PAGE_SIZE*2) // read while count of rest bytes more than size of two pages
{
*res_fresult = f_read(&MFile, Data2Write, PAGE_SIZE*2, &bytesRead);
if(*res_fresult != FR_OK) return;
AppCount += PAGE_SIZE*2;
*res_hal = FLASH_Write_Page(&app_current_add, Data2Write, PAGE_SIZE*2);
if(*res_hal != HAL_OK) return;
GPIOB->ODR^=0x2000; // indicate written two pages
}
// reading and writing rest bytes (less than two pages)
if(SizeApp != AppCount)
{
int NumOfLastBytes = SizeApp - AppCount;
*res_fresult = f_read(&MFile, Data2Write, NumOfLastBytes, &bytesRead);
if(*res_fresult != FR_OK) return;
AppCount += PAGE_SIZE*2;
*res_hal = FLASH_Write_Page(&app_current_add, Data2Write, NumOfLastBytes);
if(*res_hal != HAL_OK) return;
GPIOB->ODR^=0x2000;
}
*res_fresult = f_close(&MFile); // indicate written two pages
}
}
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) // writing first half of dma buffer (1 page)
{
if (huart->Instance == UART_BOOT)
{
if (FLAGS.InitOrWait)
{
HAL_StatusTypeDef res_hal;
if (FLAGS.InitBootPeriph) // if its first received page
{
//HAL_TIM_Base_Start_IT(&htim_boot); // start "wd" timer
FLAGS.InitBootPeriph = 0; // 5 sec silent on RX - mcu reset
}
res_hal = FLASH_Write_Page(&app_current_add, Data2Write, PAGE_SIZE);
if (res_hal != HAL_OK)
{
BOOTLOADER_ERRORS_COUNTERS.FLASH_WRITE++; // err when initialize uart
BOOTLOADER_ERRORS.FLASH_WRITE=1;
}
// HAL_UART_DMAStop(&huart_boot);
// HAL_UART_AbortReceive_IT(&huart_boot);
// HAL_UART_AbortReceive(&huart_boot);
FLAGS.HalfOfWrite = 1; // switch unwritten half of DMA buffer
cnt_tim_reset = 0; // upd WD Tim
GPIOB->ODR^=0x2000; // indicate written page
}
}
}
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) // writing second half of dma buffer (1 page)
{
if (huart->Instance == UART_BOOT)
{
if (FLAGS.InitOrWait == 0) // if its wait mode (not writting app)
{
// set Init mode, start WDTim after receiving first page
Check_CMD_USART(ReceiveDataUART); // check received uart data
FLAGS.InitOrWait = 1;
FLAGS.StartInit = 1;
FLAGS.InitBootPeriph = 1;
app_current_add = MAIN_APP_START_ADR; // set adress for app
}
else
{
HAL_StatusTypeDef res_hal;
res_hal = FLASH_Write_Page(&app_current_add, Data2Write+PAGE_SIZE, PAGE_SIZE);
if (res_hal != HAL_OK)
{
BOOTLOADER_ERRORS_COUNTERS.FLASH_WRITE++; // err when initialize uart
BOOTLOADER_ERRORS.FLASH_WRITE=1;
}
FLAGS.HalfOfWrite = 0; // switch unwritten half of DMA buffer
cnt_tim_reset = 0; // upd WD Tim
GPIOB->ODR^=0x2000; // indicate written page
}
}
}
uint32_t temp_app_cur_add;
int app_size;
/*void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan)
{
if(HAL_CAN_GetRxMessage(hcan, CAN_RX_FIFO0, &RxHeader, CAN_Data) == HAL_OK)
{
#ifdef _CAN_PUSH_ID_TO_ADDR_
if(FLAGS.InitOrWait)
{ // if its 1 - Init: writting app.bin in flash
temp_app_cur_add = app_current_add+(RxHeader.ExtId&(0x0000FFFF));
FLASH_Write_Page(&temp_app_cur_add, CAN_Data, 8);
app_size-=8; // decrease app_size
if (app_size<=0) // when its gone - reset system and go to the app
{
__ASM("");
NVIC_SystemReset();
}
}
else
{ // if its 0 - Wait: parsing address to writting and size of app.bin
app_current_add = Data2Write[0]<<24 | Data2Write[1]<<16 | Data2Write[2]<<8 | Data2Write[3];
app_size = Data2Write[4]<<24 | Data2Write[5]<<16 | Data2Write[6]<<8 | Data2Write[7];
FLAGS.InitOrWait = 1; // switch to firmware (init)
}
#endif
if(FLAGS.InitOrWait)
{
if (FLAGS.InitBootPeriph) // if its first received page
{
HAL_TIM_Base_Start_IT(&htim_boot); // start "wd" timer
FLAGS.InitBootPeriph = 0; // 5 sec silent on RX - mcu reset
}
FLASH_Write_Page(&app_current_add, CAN_Data, 8);
cnt_tim_reset=0;
}
else
{
app_current_add = MAIN_APP_START_ADR; // set adress for app
Check_CMD_USART(CAN_Data);
FLAGS.InitBootPeriph=1;
FLAGS.InitOrWait = 1;
FLAGS.StartInit = 1;
}
}
}
*/
void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
{
uint32_t er;
er = HAL_CAN_GetError(hcan);
__ASM("");
}
void Bootloader_TIM_Handler(void) // reset mcu after writing application is done
{ // add this to the TIM handler that is used (TIMx is seting up in project_setup.h)
HAL_StatusTypeDef res_fresult;
cnt_tim_reset++;
if (cnt_tim_reset > 5) // writing is done if there is silence on Rx for 5 second
{
if(FLAGS.BootloaderCMD==1)
{
FLAGS.InitMCUReady = 1;
ResetKey();
SetKey(); // write key for going to application
int NumOfLastBytes = (PAGE_SIZE - DMA1_Channel3->CNDTR%PAGE_SIZE); // read size of new data in dma buffer
if (NumOfLastBytes != 0)
{
res_fresult = FLASH_Write_Page(&app_current_add, Data2Write+PAGE_SIZE*FLAGS.HalfOfWrite, NumOfLastBytes); // writing last data
}
NVIC_SystemReset(); // reset mcu
}
else if(FLAGS.BootloaderCMD==2)
{
FLAGS.InitMCUReady = 1;
ResetKey();
SetKey();
NVIC_SystemReset();
}
}
}
void Check_CMD_USART(uint8_t *DataUART) // choose CMD (interface)
{ // 4 byte: 0xFF - erase app, else - just write app
//USART
if ((DataUART[0]|
DataUART[1]<<8|
DataUART[2]<<16) == 0xFFFFFF)
{
FLAGS.BootloaderCMD = 1;
}
//CAN
else if ((DataUART[0]|
DataUART[1]<<8|
DataUART[2]<<16) == 0xAAAFFF)
{
FLAGS.BootloaderCMD = 2;
}
//SDIO
else if ((DataUART[0]|
DataUART[1]<<8|
DataUART[2]<<16) == 0xAAFAFF)
{
FLAGS.BootloaderCMD = 3;
BSP_SD_DetectIT();
}
if (DataUART[3]== 0xFF)
{
FLAGS.reInitMCU = 1;
}
else
{
FLAGS.reInitMCU = 0;
}
}
// reset/set key function
void SetKey(void)
{
HAL_FLASH_Unlock();
HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, BOOTLOADER_KEY_ADR, BL_KEY_APP_WRITTEN);
HAL_FLASH_Lock();
}
uint32_t ReadKey(void)
{
return (*(__IO uint32_t*)BOOTLOADER_KEY_ADR);
}
void ResetKey(void)
{
HAL_FLASH_Unlock();
uint32_t PageError = 0x00;
EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;// erase pages
EraseInitStruct.PageAddress = BOOTLOADER_KEY_ADR; //address
EraseInitStruct.NbPages = 0x01;// num of erased pages
HAL_FLASHEx_Erase(&EraseInitStruct, &PageError);
HAL_FLASH_Lock();
}
HAL_StatusTypeDef BSP_SD_ITConfig(void)
{
/* Code to be updated by the user or replaced by one from the FW pack (in a stmxxxx_sd.c file) */
GPIO_InitTypeDef gpio_init_structure;
/* Configure Interrupt mode for SD detection pin */
gpio_init_structure.Pin = SDIO_SDCard_In_PIN;
gpio_init_structure.Pull = GPIO_PULLUP;
gpio_init_structure.Speed = GPIO_SPEED_HIGH;
gpio_init_structure.Mode = GPIO_MODE_IT_RISING_FALLING;
HAL_GPIO_Init(SDIO_SDCard_In_PORT, &gpio_init_structure);
/* Enable and set SD detect EXTI Interrupt to the lowest priority */
HAL_NVIC_SetPriority((SDIO_SDCard_In_IRQn), 0x00, 0x00);
HAL_NVIC_EnableIRQ((SDIO_SDCard_In_IRQn));
return HAL_OK;
// return (uint8_t)0;
}
void BSP_SD_DetectIT(void)
{ // add this to the EXTI handler that is used (EXTIx (GPIO_PIN_x) is seting up in project_setup.h)
if(SDIO_SDCard_In_PORT->IDR&SDIO_SDCard_In_PIN)
FLAGS.SDCardIn = 0;
else
FLAGS.SDCardIn = 1;
}
void Boot_SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
Error_Handler();
}
HAL_RCC_MCOConfig(RCC_MCO, RCC_MCO1SOURCE_PLLCLK, RCC_MCODIV_1);
}

2
Core/Src/can.c
View File

@ -38,7 +38,7 @@ void MX_CAN_Init(void)
/* USER CODE END CAN_Init 1 */ /* USER CODE END CAN_Init 1 */
hcan.Instance = CAN1; hcan.Instance = CAN1;
hcan.Init.Prescaler = CAN_CURRENT_SPEED; hcan.Init.Prescaler = 2;
hcan.Init.Mode = CAN_MODE_NORMAL; hcan.Init.Mode = CAN_MODE_NORMAL;
hcan.Init.SyncJumpWidth = CAN_SJW_1TQ; hcan.Init.SyncJumpWidth = CAN_SJW_1TQ;
hcan.Init.TimeSeg1 = CAN_BS1_13TQ; hcan.Init.TimeSeg1 = CAN_BS1_13TQ;

94
Core/Src/custom_flash.c Normal file
View File

@ -0,0 +1,94 @@
#include "custom_flash.h"
#include "bootloader.h"
FLASH_EraseInitTypeDef EraseInitStruct;
//uint32_t PAGE_OFFSET = ((uint32_t)((4-1) * 0x0400));
uint32_t PAGE_NUMB = 127;
uint8_t *FLASH_Read(uint32_t add)
{
return (uint8_t *)add;
}
HAL_StatusTypeDef FLASH_Write_Word(uint32_t Address, uint64_t Data) //Куда записывать
{
HAL_StatusTypeDef res;
res = HAL_FLASH_Unlock();
if (res != HAL_OK) return res;
res = HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, Address, (uint32_t)(Data));
if (res != HAL_OK) return res;
res = HAL_FLASH_Lock();
return res;
}
uint32_t word_data;
HAL_StatusTypeDef FLASH_Write_Page(uint32_t *Address, uint8_t *Data, int Data_size)
{
//GPIOB->ODR^=(0x2000);
// GPIOB->ODR|=0x4000;
HAL_StatusTypeDef res;
int data_cnt = 0;
uint32_t adr;
res = HAL_FLASH_Unlock();
if (res != HAL_OK) return res;
for (adr = *Address; adr < *Address + Data_size; adr = adr+4)
{
word_data = (
Data[data_cnt]|
Data[data_cnt+1]<<8|
Data[data_cnt+2]<<16|
Data[data_cnt+3]<<24);
res = HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, adr, word_data);
if (res != HAL_OK) return res;
data_cnt +=4;
}
*Address += Data_size;
res = HAL_FLASH_Lock();
return res;
}
HAL_StatusTypeDef FLASH_Erase_App(void) //
{
HAL_StatusTypeDef res;
uint32_t PageError = 0x00;
res = HAL_FLASH_Unlock();
if (res != HAL_OK) return res;
EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES;// erase pages
EraseInitStruct.Banks = 1;
EraseInitStruct.PageAddress = MAIN_APP_START_ADR; //address
EraseInitStruct.NbPages = MAIN_APP_NUM_OF_PAGE;// num of erased pages
res = HAL_FLASHEx_Erase(&EraseInitStruct, &PageError);
if (res != HAL_OK) return res;
res = HAL_FLASH_Lock();
return res;
}

105
Core/Src/custom_receive_and_write.c Normal file
View File

@ -0,0 +1,105 @@
#include "custom_receive_and_write.h"
extern UART_HandleTypeDef huart3;
struct flags flags_UART_FATFS;
extern FIL SDFile;
uint8_t bytescnt;
char Char_Shift = 0x41;
FIL MFile;
uint8_t Message[sizebuff] = "";
uint8_t path_uart[5] = "A.txt";
//void MountSD(void)
//{
// if((f_mount(&SDFatFS, (TCHAR const*)SDPath, MOUNT)) ==FR_OK)
// {
// for (int i=0;i<5;i++)
// {
// GPIOB->ODR^=1<<14;
// HAL_Delay(500);
// }
// GPIOB->ODR&=~(1<<14); \
// }
//}
FRESULT CreateAndOpenMessageFile(FIL *MessageFile, const TCHAR* Path)
{
return f_open(MessageFile, Path, FA_WRITE | FA_CREATE_ALWAYS);
}
FRESULT OpenMessageFile(FIL *MessageFile, const TCHAR* Path)
{
return f_open(MessageFile, Path, FA_READ);
}
FRESULT WriteMessage(FIL *MessageFile, char *Message, UINT SizeOfMessage)
{
FRESULT ResultOfOperation;
uint32_t WrittenBytes;
ResultOfOperation = f_lseek(MessageFile,f_size(MessageFile));
ResultOfOperation = f_write(MessageFile, Message, SizeOfMessage, &WrittenBytes);
if (WrittenBytes!=SizeOfMessage) return FR_INVALID_PARAMETER;
//GPIOB->ODR^=0xf000;
return ResultOfOperation;
}
FRESULT CloseMessageFile(FIL *MessageFile)
{
return f_close(MessageFile);
}
void WriteFile(char *Data, int Num_of_Data)
{
static int FileOpen = 0;
OpenMessageFile(&MFile, (const TCHAR*)path_uart);
WriteMessage(&MFile, Data, Num_of_Data);
CloseMessageFile(&MFile);
// Char_Shift++;
// path_uart[0] = (char)Char_Shift;
}
void Check_USART(void)
{
uint8_t res;
static FIL MessageFile;
if (flags_UART_FATFS.writting==0)
{ switch((int)Message[0])
{
case 1:
flags_UART_FATFS.writting = 1;
Message[bytescnt] = '\0';
res = CreateAndOpenMessageFile(&MessageFile, (const TCHAR*)(Message+1));
break;
case 2:
flags_UART_FATFS.writting = 1;
res = OpenMessageFile(&MessageFile, (const TCHAR*)path_uart);
break;
}
}
else
{
if (Message[0] == 0x03)
{
flags_UART_FATFS.writting = 0;
res = CloseMessageFile(&MessageFile);
}
else
{
res = WriteMessage(&MessageFile, (char *)Message, bytescnt);
}
}
HAL_UART_AbortReceive_IT(&huart3);
HAL_UART_Receive_IT(&huart3, Message, sizeof(Message));
bytescnt = 0;
for(int i = 0; i<sizebuff; i++)
{
Message[i] = 0x00;
}
}

125
Core/Src/custom_usart.c Normal file
View File

@ -0,0 +1,125 @@
#ifndef _CUSTOM_USART_
#define _CUSTOM_USART_
#include "custom_usart.h"
UART_HandleTypeDef huart_boot;
DMA_HandleTypeDef hdma_usart_boot_rx;
// CUSTOM UART INIT
// DMA INIT (RCC, NVIC) SHOULD BE ADDED IN DMA.C
void User_UART_Init(UART_HandleTypeDef* huart, DMA_HandleTypeDef *DMAhuart, struct UARTSettings *uuart)
{ // function takes uart handler, dma handler and setting structure for init
// get setting for uart from UARTSettings structure
huart->Instance = uuart->UARTx;
huart->Init.BaudRate = uuart->UART_Speed;
// everything else is default (for now, maybe this settings would be added in UARTSettings structure later)
huart->Init.WordLength = UART_WORDLENGTH_8B;
huart->Init.StopBits = UART_STOPBITS_1;
huart->Init.Parity = UART_PARITY_NONE;
huart->Init.Mode = UART_MODE_TX_RX;
huart->Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart->Init.OverSampling = UART_OVERSAMPLING_16;
if (HAL_UART_Init(huart) != HAL_OK)
{
Error_Handler();
}
// init gpio from UARTSettings structure
UART_GPIO_Init(uuart->GPIOx, uuart->GPIO_PIN_RX, uuart->GPIO_PIN_TX);
// init dma from UARTSettings structure if need
if (uuart->DMAChannel != 0)
UART_DMA_Init(huart, DMAhuart, uuart->DMAChannel);
}
void UART_GPIO_Init(GPIO_TypeDef *GPIOx, uint16_t GPIO_PIN_RX, uint16_t GPIO_PIN_TX)
{ // function takes port and pins (for rx and tx)
GPIO_InitTypeDef GPIO_InitStruct = {0};
// choose port for enable clock
if (GPIOx==GPIOA)
__HAL_RCC_GPIOA_CLK_ENABLE();
else if (GPIOx==GPIOB)
__HAL_RCC_GPIOB_CLK_ENABLE();
else if (GPIOx==GPIOC)
__HAL_RCC_GPIOC_CLK_ENABLE();
else if (GPIOx==GPIOD)
__HAL_RCC_GPIOD_CLK_ENABLE();
// USART3 GPIO Configuration
//GPIO_PIN_TX ------> USART_TX
GPIO_InitStruct.Pin = GPIO_PIN_TX;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);
// GPIO_PIN_RX ------> USART_RX
GPIO_InitStruct.Pin = GPIO_PIN_RX;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);
}
void UART_DMA_Init(UART_HandleTypeDef *huart, DMA_HandleTypeDef *hdma_rx, DMA_Channel_TypeDef *DMAhuart)
{ // function takes uart and dma handlers and dmachannel for uart
// for now only dma rx is supported, tx maybe later if needed
/* USART3 DMA Init */
/* USART3_RX Init */
hdma_rx->Instance = DMAhuart;
hdma_rx->Init.Direction = DMA_PERIPH_TO_MEMORY;
hdma_rx->Init.PeriphInc = DMA_PINC_DISABLE;
hdma_rx->Init.MemInc = DMA_MINC_ENABLE;
hdma_rx->Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
hdma_rx->Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
hdma_rx->Init.Mode = DMA_CIRCULAR;
hdma_rx->Init.Priority = DMA_PRIORITY_LOW;
if (HAL_DMA_Init(hdma_rx) != HAL_OK)
{
Error_Handler();
}
__USER_LINKDMA(huart,hdmarx,hdma_rx);
// __USER_LINKDMA is need because __HAL_LINKDMA is written for global defined hdma_rx
// so you get error because hal uses . insted of ->
}
void HAL_UART_MspInit(UART_HandleTypeDef* huart) // redefine hal function
{ // left only rcc and interrupt init for USART_1,2,3 (maybe UART_4,5 need to be added)
// GPIO and DMA init was move to their own functions
if(huart->Instance==USART3)
{
/* USART3 clock enable */
__HAL_RCC_USART3_CLK_ENABLE();
/* USART3 interrupt Init */
HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART3_IRQn);
}
else if(huart->Instance==USART2)
{
/* USART3 clock enable */
__HAL_RCC_USART2_CLK_ENABLE();
/* USART3 interrupt Init */
HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART2_IRQn);
}
else if(huart->Instance==USART1)
{
/* USART3 clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
/* USART3 interrupt Init */
HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART1_IRQn);
}
}
#endif

15
Core/Src/main.c
View File

@ -23,13 +23,14 @@
/* Private includes ----------------------------------------------------------*/ /* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "custom_flash.h"
#include "gpio.h" #include "gpio.h"
//#include "bootloader.h" //#include "bootloader.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/ /* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */ /* USER CODE BEGIN PTD */
int friman=0;
/* USER CODE END PTD */ /* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/
@ -56,7 +57,19 @@
/* Private user code ---------------------------------------------------------*/ /* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */ /* USER CODE BEGIN 0 */
//uint32_t programBytes2Read;
//uint32_t programBytesCounter;
//uint32_t currentAddress;
//UINT readBytes;
//FRESULT result;
//extern uint8_t ReceiveDataUART[4];
//extern uint8_t Data2Write[PAGE_SIZE*2];
//extern struct flag FLAGS;
//uint8_t *FLASH_Read(uint32_t add)
//{
// return (uint8_t *)add;
//}
/* USER CODE END 0 */ /* USER CODE END 0 */
/** /**

794
Core/Src/requester.c
View File

@ -13,10 +13,6 @@ struct data Data;
struct controlflags ControlFlags; struct controlflags ControlFlags;
struct received_request ReceivedRequest; struct received_request ReceivedRequest;
uint8_t CurrentStep = 0;
uint8_t LastStep = 0;
struct RXMsg rxMsg[CAN_RX_BUFFER_SIZE];
#define MAX_NUM_OF_DEVICES_PER_LINE 4 #define MAX_NUM_OF_DEVICES_PER_LINE 4
#define MAX_NUM_OF_REGISTERS_IN_DEVICE 255 #define MAX_NUM_OF_REGISTERS_IN_DEVICE 255
@ -30,11 +26,6 @@ _Bool IsLeapYear(uint8_t year)
return (year%400==0)||((year%4==0)&&(year%100!=0)); return (year%400==0)||((year%4==0)&&(year%100!=0));
} }
uint16_t AvailableCanRxMsg(void)
{
return ((uint16_t)(CAN_RX_BUFFER_SIZE + LastStep - CurrentStep))%CAN_RX_BUFFER_SIZE;
}
/** /**
* @brief Инициализация переферии * @brief Инициализация переферии
* @details Инициализация HAL, CAN, TIM7, RTC. * @details Инициализация HAL, CAN, TIM7, RTC.
@ -44,9 +35,9 @@ void REQUESTER_Init(void)
{ {
HAL_Init(); HAL_Init();
MX_CAN_Init(); MX_CAN_Init();
HAL_CAN_Start(&_HCAN); HAL_CAN_Start(&hcan);
REQUESTER_CAN_FILTERS(); REQUESTER_CAN_FILTERS();
HAL_CAN_ActivateNotification(&_HCAN, CAN_IT_RX_FIFO0_MSG_PENDING); HAL_CAN_ActivateNotification(&hcan, CAN_IT_RX_FIFO0_MSG_PENDING);
ControlFlags.IsPulse = 1; ControlFlags.IsPulse = 1;
MX_TIM7_Init(); MX_TIM7_Init();
MX_RTC_Init(); MX_RTC_Init();
@ -86,59 +77,45 @@ void REQUESTER_MainWhile(void)
CAN_TxHeaderTypeDef TxHeader; CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0; uint32_t TxMailBox = 0;
uint8_t data[8]; uint8_t data[8];
extID eID; union ext_ID eID;
eID.BitAll = 0; eID.Fields.DeviceID = 16;
eID.StandardFields.DeviceID = 2; eID.Fields.DataType = DATA_TYPE_ANALOG;
eID.StandardFields.DataType = DATA_TYPE_ANALOG; eID.Fields.SensorType = 0x1F;
eID.StandardFields.SensorType = 0x1F; eID.Fields.SensorID = 0;
eID.StandardFields.SensorID = 0; eID.Fields.Route = ROUTE_SLAVE;
eID.StandardFields.Route = ROUTE_SLAVE;
TxHeader.IDE = CAN_ID_EXT;
TxHeader.TransmitGlobalTime = DISABLE; TxHeader.TransmitGlobalTime = DISABLE;
TxHeader.RTR = CAN_RTR_DATA; TxHeader.RTR = CAN_RTR_DATA;
TxHeader.ExtId = eID.BitAll;
int TxTest = 0; int TxTest = 0;
HAL_TIM_Base_Start_IT(&htim7); HAL_TIM_Base_Start_IT(&htim7);
while(1) while(1)
{ {
if(AvailableCanRxMsg()) if(ReceivedRequest.AnalogFlags.AllFlags)
{ {
if(rxMsg[CurrentStep].eID.StandardFields.DataType == DATA_TYPE_ANALOG) REQUESTER_AnalogProcessing();
{ }
REQUESTER_AnalogProcessing(rxMsg[CurrentStep]); if(ReceivedRequest.BroadcastFlags.AllFlags)
} {
else if(rxMsg[CurrentStep].eID.StandardFields.DataType == DATA_TYPE_BROADCAST) REQUESTER_BroadcastProcessing();
{ }
REQUESTER_BroadcastProcessing(rxMsg[CurrentStep]); if(ReceivedRequest.DiscreticFlags.AllFlags)
} {
else if(rxMsg[CurrentStep].eID.StandardFields.DataType == DATA_TYPE_DISCRETE) REQUESTER_DiscreticProcessing();
{ }
REQUESTER_DiscreticProcessing(rxMsg[CurrentStep]); if(ReceivedRequest.ModbusFlags.AllFlags)
} {
else if(rxMsg[CurrentStep].eID.StandardFields.DataType == DATA_TYPE_MODBUS_COIL || REQUESTER_ModbusProcessing();
rxMsg[CurrentStep].eID.StandardFields.DataType == DATA_TYPE_MODBUS_DISCRETE ||
rxMsg[CurrentStep].eID.StandardFields.DataType == DATA_TYPE_MODBUS_HOLDING ||
rxMsg[CurrentStep].eID.StandardFields.DataType == DATA_TYPE_MODBUS_INPUT)
{
REQUESTER_ModbusProcessing(rxMsg[CurrentStep]);
}
CurrentStep = (uint16_t)(CurrentStep + 1) % CAN_RX_BUFFER_SIZE;
} }
/*
while(HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0); while(HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0);
TxHeader.ExtId = eID.BitAll;
if(HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox)!= HAL_OK) if(HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox)!= HAL_OK)
{ {
ProverkaArbitors++; ProverkaArbitors++;
} }
*/ eID.Fields.SensorID++;
// eID.Fields.SensorID++; if(eID.Fields.SensorID>100)
// if(eID.Fields.SensorID>10) {
//{ eID.Fields.SensorID = 0;
// eID.Fields.SensorID = 0; }
// }
} }
} }
@ -146,250 +123,92 @@ void REQUESTER_MainWhile(void)
* @brief Функция обработки аналоговых запросов. * @brief Функция обработки аналоговых запросов.
* @details Функция, формирующая и отправляющая ответ на запросы. Типы запросов: Универсальный, Уставки, Напряжение, Ток, Температура * @details Функция, формирующая и отправляющая ответ на запросы. Типы запросов: Универсальный, Уставки, Напряжение, Ток, Температура
*/ */
void REQUESTER_AnalogProcessing(struct RXMsg _rxMsg) void REQUESTER_AnalogProcessing()
{ {
switch (_rxMsg.eID.StandardFields.SensorType) CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
if(ReceivedRequest.AnalogFlags.AnalogType.Request_Universal_Sens)
{ {
case SENSOR_TYPE_ANALOG_UNIVERSAL: ReceivedRequest.AnalogFlags.AnalogType.Request_Universal_Sens = 0;
{ }
CanRequestToAnalogUniversal(_rxMsg); if(ReceivedRequest.AnalogFlags.AnalogType.Request_U_Sens)
break; {
} //Запрос на данные датчика напряжения.
case SENSOR_TYPE_ANALOG_USTAVKI: //В дальнейшем реализовать отправку настоящих данных.
{ //А пока - тестовое сообщение, нужное для отладки.
CanRequestToAnalogUSTAVKI(_rxMsg); //Расширенный ID
break; TxHeader.IDE=CAN_ID_EXT;
} //Ответ на запрос осуществляется по тому-же ID,
case SENSOR_TYPE_ANALOG_U: //с которым был отправлен запрос.
{ union ext_ID eID;
CanRequestToAnalogUSens(_rxMsg); eID.BitAll = ReceivedRequest.RequestedExtID.BitAll;
break; eID.Fields.Route = ROUTE_SLAVE;
} TxHeader.ExtId = eID.BitAll;
case SENSOR_TYPE_ANALOG_I: //Выставляется количество передаваемых байтов. (Макс. 8)
{ TxHeader.DLC = 6;
CanRequestToAnalogISens(_rxMsg); data[0] = 'U';
break; data[1] = ' ';
} data[2] = 's';
case SENSOR_TYPE_ANALOG_T: data[3] = 'e';
{ data[4] = 'n';
CanRequestToAnalogTSens(_rxMsg); data[5] = 's';
break; HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox);
} ReceivedRequest.AnalogFlags.AnalogType.Request_U_Sens=0;
default: }
//RESERVE SENSOR TYPE if(ReceivedRequest.AnalogFlags.AnalogType.Request_I_Sens)
break; {
TxHeader.IDE=CAN_ID_EXT;
union ext_ID eID;
eID.BitAll = ReceivedRequest.RequestedExtID.BitAll;
eID.Fields.Route = ROUTE_SLAVE;
TxHeader.ExtId = eID.BitAll;
TxHeader.DLC = 6;
data[0] = 'I';
data[1] = ' ';
data[2] = 's';
data[3] = 'e';
data[4] = 'n';
data[5] = 's';
HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox);
ReceivedRequest.AnalogFlags.AnalogType.Request_I_Sens=0;
}
if(ReceivedRequest.AnalogFlags.AnalogType.Request_T_Sens)
{
TxHeader.IDE=CAN_ID_EXT;
union ext_ID eID;
eID.BitAll = ReceivedRequest.RequestedExtID.BitAll;
eID.Fields.Route = ROUTE_SLAVE;
TxHeader.ExtId = eID.BitAll;
TxHeader.DLC = 6;
data[0] = 'T';
data[1] = ' ';
data[2] = 's';
data[3] = 'e';
data[4] = 'n';
data[5] = 's';
HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox);
ReceivedRequest.AnalogFlags.AnalogType.Request_T_Sens=0;
} }
}
__weak HAL_StatusTypeDef CanRequestToAnalogUniversal(struct RXMsg _rxMsg)
{
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
TxHeader.IDE = CAN_ID_EXT;
TxHeader.TransmitGlobalTime = DISABLE;
TxHeader.RTR = CAN_RTR_DATA;
extID tmp_eID;
tmp_eID.BitAll = _rxMsg.eID.BitAll;
tmp_eID.StandardFields.Route = ROUTE_SLAVE;
TxHeader.ExtId = tmp_eID.BitAll;
TxHeader.DLC = 6;
data[0] = 'U';
data[1] = 'N';
data[2] = 'I';
data[3] = 'V';
data[4] = 'E';
data[5] = 'R';
return HAL_CAN_AddTxMessage(&_HCAN, &TxHeader, data, &TxMailBox);
}
__weak HAL_StatusTypeDef CanRequestToAnalogUSTAVKI(struct RXMsg _rxMsg)
{
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
TxHeader.IDE = CAN_ID_EXT;
TxHeader.TransmitGlobalTime = DISABLE;
TxHeader.RTR = CAN_RTR_DATA;
extID tmp_eID;
tmp_eID.BitAll = _rxMsg.eID.BitAll;
tmp_eID.StandardFields.Route = ROUTE_SLAVE;
TxHeader.ExtId = tmp_eID.BitAll;
TxHeader.DLC = 7;
data[0] = 'U';
data[1] = 'S';
data[2] = 'T';
data[3] = 'A';
data[4] = 'V';
data[5] = 'K';
data[6] = 'I';
return HAL_CAN_AddTxMessage(&_HCAN, &TxHeader, data, &TxMailBox);
}
__weak HAL_StatusTypeDef CanRequestToAnalogUSens(struct RXMsg _rxMsg)
{
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
TxHeader.IDE = CAN_ID_EXT;
TxHeader.TransmitGlobalTime = DISABLE;
TxHeader.RTR = CAN_RTR_DATA;
extID tmp_eID;
tmp_eID.BitAll = _rxMsg.eID.BitAll;
tmp_eID.StandardFields.Route = ROUTE_SLAVE;
TxHeader.ExtId = tmp_eID.BitAll;
TxHeader.DLC = 6;
data[0] = 'U';
data[1] = ' ';
data[2] = 's';
data[3] = 'e';
data[4] = 'n';
data[5] = 's';
return HAL_CAN_AddTxMessage(&_HCAN, &TxHeader, data, &TxMailBox);
}
__weak HAL_StatusTypeDef CanRequestToAnalogISens(struct RXMsg _rxMsg)
{
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
TxHeader.IDE = CAN_ID_EXT;
TxHeader.TransmitGlobalTime = DISABLE;
TxHeader.RTR = CAN_RTR_DATA;
extID tmp_eID;
tmp_eID.BitAll = _rxMsg.eID.BitAll;
tmp_eID.StandardFields.Route = ROUTE_SLAVE;
TxHeader.ExtId = tmp_eID.BitAll;
TxHeader.DLC = 6;
data[0] = 'I';
data[1] = ' ';
data[2] = 's';
data[3] = 'e';
data[4] = 'n';
data[5] = 's';
return HAL_CAN_AddTxMessage(&_HCAN, &TxHeader, data, &TxMailBox);
}
__weak HAL_StatusTypeDef CanRequestToAnalogTSens(struct RXMsg _rxMsg)
{
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
TxHeader.IDE = CAN_ID_EXT;
TxHeader.TransmitGlobalTime = DISABLE;
TxHeader.RTR = CAN_RTR_DATA;
extID tmp_eID;
tmp_eID.BitAll = _rxMsg.eID.BitAll;
tmp_eID.StandardFields.Route = ROUTE_SLAVE;
TxHeader.ExtId = tmp_eID.BitAll;
TxHeader.DLC = 6;
data[0] = 'T';
data[1] = ' ';
data[2] = 's';
data[3] = 'e';
data[4] = 'n';
data[5] = 's';
return HAL_CAN_AddTxMessage(&_HCAN, &TxHeader, data, &TxMailBox);
} }
/** /**
* @brief Функция обработки широковещательных запросов. * @brief Функция обработки широковещательных запросов.
* @details Функция, выполняющая команды, переданные в широковещательном формате с головного (master) устройства. Типы команд: Запрос статуса, запрос на включение или выключение, рестарт устройств, установка времени. * @details Функция, выполняющая команды, переданные в широковещательном формате с головного (master) устройства. Типы команд: Запрос статуса, запрос на включение или выключение, рестарт устройств, установка времени.
*/ */
void REQUESTER_BroadcastProcessing(struct RXMsg _rxMsg) void REQUESTER_BroadcastProcessing()
{ {
switch(_rxMsg.eID.StandardFields.SensorType) if(ReceivedRequest.BroadcastFlags.BroadcastType.Request_OnOff)
{ {
case SENSOR_TYPE_BROADCAST_STATUS: //Обработка запроса на вкл/выкл
{ ControlFlags.IsPulse = !ControlFlags.IsPulse;
//Обработка запроса статуса устройства ReceivedRequest.BroadcastFlags.BroadcastType.Request_OnOff = 0;
CanRequestToBroadcastStatus(_rxMsg);
break;
}
case SENSOR_TYPE_BROADCAST_ONOFF:
{
//Обработка запроса на вкл/выкл
CanRequestToBroadcastOnOff(_rxMsg);
break;
}
case SENSOR_TYPE_BROADCAST_RESTARTDEVICE:
{
CanRequestToBroadcastRestart(_rxMsg);
break;
}
case SENSOR_TYPE_BROADCAST_RTCSETUP:
{
//Обработка запроса на синхронизацию времени
//С головным устройством
CanRequestToBroadcastRtcSetup(_rxMsg);
break;;
}
default:
//RESERVE SENSOR TYPE.
break;
} }
} if(ReceivedRequest.BroadcastFlags.BroadcastType.Request_RTC_Setup)
__weak HAL_StatusTypeDef CanRequestToBroadcastStatus(struct RXMsg _rxMsg)
{
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
TxHeader.IDE = CAN_ID_EXT;
TxHeader.DLC = 7;
TxHeader.TransmitGlobalTime = DISABLE;
TxHeader.RTR = CAN_RTR_DATA;
extID tmp_eID;
tmp_eID.BitAll = _rxMsg.eID.BitAll;
tmp_eID.StandardFields.Route = ROUTE_SLAVE;
tmp_eID.StandardFields.DeviceID = CURRENT_ID_DEVICE;
TxHeader.ExtId = tmp_eID.BitAll;
RTC_TimeTypeDef sTime = {0};
HAL_RTC_GetTime(&hrtc, &sTime, RTC_FORMAT_BIN);
data[0] = sTime.Hours;
data[1] = sTime.Minutes;
data[2] = sTime.Seconds;
RTC_DateTypeDef DateToUpdate = {0};
HAL_RTC_GetDate(&hrtc, &DateToUpdate, RTC_FORMAT_BIN);
data[3] = DateToUpdate.Year;
data[4] = DateToUpdate.Month;
data[5] = DateToUpdate.Date;
data[6] = DateToUpdate.WeekDay;
return HAL_CAN_AddTxMessage(&_HCAN, &TxHeader, data, &TxMailBox);
}
__weak void CanRequestToBroadcastOnOff(struct RXMsg _rxMsg)
{
ControlFlags.IsPulse = !ControlFlags.IsPulse;
}
__weak void CanRequestToBroadcastRestart(struct RXMsg _rxMsg)
{
if(_rxMsg.DLC == 0)
{ {
return; //Обработка запроса на синхронизацию времени
} //С головным устройством
if(_rxMsg.eID.StandardFields.SensorID == (CURRENT_ID_DEVICE / (_rxMsg.DLC*8))) if(ReceivedRequest.RequestedDLC > 7)
{
uint64_t page = 0;
for(int i = 0; i < _rxMsg.DLC; i++)
{
page+=(_rxMsg.Data[i]<<(i*8));
}
if((page>>CURRENT_ID_DEVICE)&0b1)
{
NVIC_SystemReset();
}
}
return;
}
__weak void CanRequestToBroadcastRtcSetup(struct RXMsg _rxMsg)
{
if(_rxMsg.DLC > 7)
{ {
//ERROR //ERROR
} }
@ -397,21 +216,52 @@ __weak void CanRequestToBroadcastRtcSetup(struct RXMsg _rxMsg)
{ {
int DaysCount_Normal[2][12] = {{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}, int DaysCount_Normal[2][12] = {{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31},
{31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}}; {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}};
if (_rxMsg.Data[0]>23 || if (ReceivedRequest.RxData[0]>23 ||
_rxMsg.Data[1]>59 || ReceivedRequest.RxData[1]>59 ||
_rxMsg.Data[2]>59 || ReceivedRequest.RxData[2]>59 ||
_rxMsg.Data[3]>99 || ReceivedRequest.RxData[3]>99 ||
_rxMsg.Data[4]>12 || ReceivedRequest.RxData[4]>12 ||
_rxMsg.Data[5] > DaysCount_Normal[IsLeapYear(_rxMsg.Data[3])][_rxMsg.Data[4]] || ReceivedRequest.RxData[5] > DaysCount_Normal[IsLeapYear(ReceivedRequest.RxData[3])][ReceivedRequest.RxData[4]] ||
_rxMsg.Data[6]>6) ReceivedRequest.RxData[6]>6)
{ {
//ERROR //ERROR
} }
else else
{ {
REQUESTER_RTC_SYNC(_rxMsg.Data); REQUESTER_RTC_SYNC(ReceivedRequest.RxData);
} }
} }
ReceivedRequest.BroadcastFlags.BroadcastType.Request_RTC_Setup = 0;
}
if(ReceivedRequest.BroadcastFlags.BroadcastType.Request_Status)
{
//Обработка запроса статуса устройства
RTC_TimeTypeDef sTime = {0};
RTC_DateTypeDef DateToUpdate = {0};
HAL_RTC_GetTime(&hrtc, &sTime, RTC_FORMAT_BIN);
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0;
uint8_t data[8];
TxHeader.IDE=CAN_ID_EXT;
union ext_ID eID;
eID.BitAll = ReceivedRequest.RequestedExtID.BitAll;
eID.Fields.Route = ROUTE_SLAVE;
TxHeader.ExtId = eID.BitAll;
TxHeader.DLC = 7;
data[0] = sTime.Hours;
data[1] = sTime.Minutes;
data[2] = sTime.Seconds;
HAL_RTC_GetDate(&hrtc, &DateToUpdate, RTC_FORMAT_BIN);
data[3] = DateToUpdate.Year;
data[4] = DateToUpdate.Month;
data[5] = DateToUpdate.Date;
data[6] = DateToUpdate.WeekDay;
HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox);
ReceivedRequest.AnalogFlags.AnalogType.Request_T_Sens=0;
ReceivedRequest.BroadcastFlags.BroadcastType.Request_Status = 0;
}
} }
/** /**
@ -419,136 +269,51 @@ __weak void CanRequestToBroadcastRtcSetup(struct RXMsg _rxMsg)
* @details Функция, формирующая и отправляющая ответ на запросы. Типы запросов: Аварии, Предупреждения, Управляющие сигналы, Флаги, Рестарт устройства, Изменение режима работы устройства, Запрос на устройство. * @details Функция, формирующая и отправляющая ответ на запросы. Типы запросов: Аварии, Предупреждения, Управляющие сигналы, Флаги, Рестарт устройства, Изменение режима работы устройства, Запрос на устройство.
* @note Запрос на устройство. Головное (master) устройство запрашивает некоторое колличество параметров. В Data - 64 битовых адресса параметров, тип которых задаётся в Sensor ID. Имеется возможность запрашивать непоследовательные параметры. * @note Запрос на устройство. Головное (master) устройство запрашивает некоторое колличество параметров. В Data - 64 битовых адресса параметров, тип которых задаётся в Sensor ID. Имеется возможность запрашивать непоследовательные параметры.
*/ */
void REQUESTER_DiscreticProcessing(struct RXMsg _rxMsg) void REQUESTER_DiscreticProcessing()
{ {
switch(_rxMsg.eID.StandardFields.SensorType){ if(ReceivedRequest.DiscreticFlags.DiscreticType.Request_Accident)
case SENSOR_TYPE_DISCRETE_ACCIDENT: {
{ ReceivedRequest.DiscreticFlags.DiscreticType.Request_Accident = 0;
CanRequestToDiscreteAccident(_rxMsg); }
break; if(ReceivedRequest.DiscreticFlags.DiscreticType.Request_Control_Signals)
} {
case SENSOR_TYPE_DISCRETE_WARNING: ReceivedRequest.DiscreticFlags.DiscreticType.Request_Control_Signals = 0;
{ }
CanRequestToDiscreteWarning(_rxMsg); if(ReceivedRequest.DiscreticFlags.DiscreticType.Request_Flags)
break; {
} ReceivedRequest.DiscreticFlags.DiscreticType.Request_Flags = 0;
case SENSOR_TYPE_DISCRETE_CONTROL_SIGNALS: }
{ if(ReceivedRequest.DiscreticFlags.DiscreticType.Request_Warning)
CanRequestToDiscreteControlSignals(_rxMsg); {
break; ReceivedRequest.DiscreticFlags.DiscreticType.Request_Warning = 0;
} }
case SENSOR_TYPE_DISCRETE_FLAGS: if(ReceivedRequest.DiscreticFlags.DiscreticType.Request_Reset)
{ {
CanRequestToDiscreteFlags(_rxMsg); ReceivedRequest.DiscreticFlags.DiscreticType.Request_Reset = 0;
break; NVIC_SystemReset();
} }
case SENSOR_TYPE_DISCRETE_RESET: if(ReceivedRequest.DiscreticFlags.DiscreticType.Request_List_of_Parameters)
{ {
CanRequestToDiscreteReset(_rxMsg); ReceivedRequest.DiscreticFlags.DiscreticType.Request_List_of_Parameters = 0;
break; for(int Current_byte = 0; Current_byte < 8; Current_byte++)
} {
case SENSOR_TYPE_DISCRETE_CHANGE_MODE: for(int Current_bit = 0; Current_bit < 8; Current_bit++)
{ {
CanRequestToDiscreteChangeMode(_rxMsg); if((ReceivedRequest.RxData[Current_byte]>>Current_bit)&0b1)
break; {
} _GET_MODBUS_ADR(ReceivedRequest.RequestedExtID.Fields.SensorID, Current_byte, Current_bit);
case SENSOR_TYPE_DISCRETE_REQUEST_LIST_OF_PARAMETERS: }
{ }
CanRequestToDiscreteRequestListOfParameters(_rxMsg); }
break;
}
default:
//RESERVE SENSOR TYPE.
break;
} }
}
__weak void CanRequestToDiscreteAccident(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToDiscreteWarning(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToDiscreteControlSignals(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToDiscreteFlags(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToDiscreteReset(struct RXMsg _rxMsg)
{
NVIC_SystemReset();
}
__weak void CanRequestToDiscreteChangeMode(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToDiscreteRequestListOfParameters(struct RXMsg _rxMsg)
{
return;
} }
/** /**
* @brief Функция обработки Modbus запросов. * @brief Функция обработки Modbus запросов.
* @details Функция, формирующая и отправляющая ответ на запросы. * @details Функция, формирующая и отправляющая ответ на запросы.
*/ */
void REQUESTER_ModbusProcessing(struct RXMsg _rxMsg) void REQUESTER_ModbusProcessing()
{ {
switch(_rxMsg.eID.ModbusFields.DataType)
{
case DATA_TYPE_MODBUS_COIL:
{
CanRequestToModbusCoil(_rxMsg);
break;
}
case DATA_TYPE_MODBUS_DISCRETE:
{
CanRequestToModbusDiscrete(_rxMsg);
break;
}
case DATA_TYPE_MODBUS_HOLDING:
{
CanRequestToModbusHolding(_rxMsg);
break;
}
case DATA_TYPE_MODBUS_INPUT:
{
CanRequestToModbusInput(_rxMsg);
break;
}
default:
//ERROR
break;
}
}
__weak void CanRequestToModbusCoil(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToModbusDiscrete(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToModbusHolding(struct RXMsg _rxMsg)
{
return;
}
__weak void CanRequestToModbusInput(struct RXMsg _rxMsg)
{
return;
}
/* СТАРЫЙ УЖАСНЫЙ МОДБАС
if((ReceivedRequest.SensorToModbus.Modbus.StrAdr>=0) && (ReceivedRequest.SensorToModbus.Modbus.StrAdr<=127)) if((ReceivedRequest.SensorToModbus.Modbus.StrAdr>=0) && (ReceivedRequest.SensorToModbus.Modbus.StrAdr<=127))
{ {
//Обращение к существующему в устройстве модбас регистру //Обращение к существующему в устройстве модбас регистру
@ -567,11 +332,11 @@ __weak void CanRequestToModbusInput(struct RXMsg _rxMsg)
) )
{ {
TxHeader.DLC = 0; TxHeader.DLC = 0;
extID eID; union ext_ID eID;
eID.BitAll = ReceivedRequest.RequestedExtID.BitAll; eID.BitAll = ReceivedRequest.RequestedExtID.BitAll;
eID.StandardFields.Route = ROUTE_SLAVE; eID.Fields.Route = ROUTE_SLAVE;
eID.StandardFields.SensorType = RequestFromDLC>>11; eID.Fields.SensorType = RequestFromDLC>>11;
eID.StandardFields.SensorID = RequestFromDLC; eID.Fields.SensorID = RequestFromDLC;
TxHeader.ExtId = eID.BitAll; TxHeader.ExtId = eID.BitAll;
for(int DataFor = 0; DataFor < 8; DataFor+=2) for(int DataFor = 0; DataFor < 8; DataFor+=2)
{ {
@ -588,17 +353,16 @@ __weak void CanRequestToModbusInput(struct RXMsg _rxMsg)
while(HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0); while(HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0);
HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox); HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox);
} }
extID emID; union ext_ID_Modbus extID;
emID.BitAll = 0; extID.Fields.DeviceID = CURRENT_ID_DEVICE;
emID.ModbusFields.DeviceID = CURRENT_ID_DEVICE; extID.Fields.DataType = DATA_TYPE_ERROR;
emID.ModbusFields.DataType = DATA_TYPE_ERROR; extID.Fields.CountReg = NONEXISTENT_ELEMENT;
emID.ModbusFields.CountReg = NONEXISTENT_ELEMENT; extID.Fields.Route = ROUTE_SLAVE;
emID.ModbusFields.Route = ROUTE_SLAVE;
TxHeader.DLC = 0; TxHeader.DLC = 0;
for(;(RequestFromDLC-ReceivedRequest.SensorToModbus.Modbus.StrAdr)<ReceivedRequest.SensorToModbus.Modbus.Count; RequestFromDLC++) for(;(RequestFromDLC-ReceivedRequest.SensorToModbus.Modbus.StrAdr)<ReceivedRequest.SensorToModbus.Modbus.Count; RequestFromDLC++)
{ {
emID.ModbusFields.StrAdr = RequestFromDLC; extID.Fields.StrAdr = RequestFromDLC;
TxHeader.ExtId = emID.BitAll; TxHeader.ExtId = extID.BitAll;
while(HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0); while(HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0);
HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox); HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox);
} }
@ -606,26 +370,8 @@ __weak void CanRequestToModbusInput(struct RXMsg _rxMsg)
return; return;
} }
ReceivedRequest.ModbusFlags.AllFlags = 0; ReceivedRequest.ModbusFlags.AllFlags = 0;
*/
void TakeRxMsgToBuffer(extID tmp_eID, uint32_t tmp_IDE, uint32_t tmp_RTR, uint32_t tmp_DLC, uint8_t *tmp_DATA, uint16_t tmp_LastStep)
{
rxMsg[tmp_LastStep].eID.BitAll = tmp_eID.BitAll;
rxMsg[tmp_LastStep].info.EXT = tmp_IDE;
rxMsg[tmp_LastStep].info.RTR = tmp_RTR;
rxMsg[tmp_LastStep].DLC = tmp_DLC;
for(int i = 0; i < tmp_DLC; i++)
{
rxMsg[tmp_LastStep].Data[i] = tmp_DATA[i];
}
LastStep = tmp_LastStep;
} }
/**
* @brief Callback-Функция обработки приёма.
* @details Функция, сигнализирующая через флаги в бесконечный цикл REQUESTER_MainWhile о приёме запроса.
*/
void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan) void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan)
{ {
CAN_RxHeaderTypeDef RxHeader; CAN_RxHeaderTypeDef RxHeader;
@ -634,62 +380,131 @@ void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan)
//Расширенный ID //Расширенный ID
if(RxHeader.IDE == CAN_ID_EXT) if(RxHeader.IDE == CAN_ID_EXT)
{ {
uint16_t tmp_LastStep = (uint16_t)(LastStep + 1) % CAN_RX_BUFFER_SIZE; union ext_ID ExtID_Of_RX_MSG;
if(tmp_LastStep == CurrentStep)
{
return;
}
extID ExtID_Of_RX_MSG;
ExtID_Of_RX_MSG.BitAll = RxHeader.ExtId; ExtID_Of_RX_MSG.BitAll = RxHeader.ExtId;
//Полученное сообщение - широковещательное //Полученное сообщение - широковещательное
if (ExtID_Of_RX_MSG.StandardFields.DeviceID == ID_MAIN_DEVICE) if (ExtID_Of_RX_MSG.Fields.DeviceID == ID_MAIN_DEVICE)
{ {
if(ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_BROADCAST) if(ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_BROADCAST)
{ {
TakeRxMsgToBuffer(ExtID_Of_RX_MSG, RxHeader.IDE, RxHeader.RTR, RxHeader.DLC, RCAN_Data, tmp_LastStep); switch(ExtID_Of_RX_MSG.Fields.SensorType)
{
case SENSOR_TYPE_STATUS:
ReceivedRequest.BroadcastFlags.BroadcastType.Request_Status = 1;
break;
case SENSOR_TYPE_ONOFF:
ReceivedRequest.BroadcastFlags.BroadcastType.Request_OnOff = 1;
break;
case SENSOR_TYPE_RTCSETUP:
ReceivedRequest.RequestedDLC = RxHeader.DLC;
ReceivedRequest.RxData[0] = RCAN_Data[0];
ReceivedRequest.RxData[1] = RCAN_Data[1];
ReceivedRequest.RxData[2] = RCAN_Data[2];
ReceivedRequest.RxData[3] = RCAN_Data[3];
ReceivedRequest.RxData[4] = RCAN_Data[4];
ReceivedRequest.RxData[5] = RCAN_Data[5];
ReceivedRequest.RxData[6] = RCAN_Data[6];
ReceivedRequest.BroadcastFlags.BroadcastType.Request_RTC_Setup = 1;
break;
default:
break;
}
return; return;
} }
} }
//Если ID запроса соответствует ID устройства //Если ID запроса соответствует ID устройства
if(ExtID_Of_RX_MSG.StandardFields.DeviceID == (CURRENT_ID_DEVICE)) if(ExtID_Of_RX_MSG.Fields.DeviceID == (CURRENT_ID_DEVICE))
{ {
if(ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_DISCRETE) if(ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_DISCRETE)
{ {
TakeRxMsgToBuffer(ExtID_Of_RX_MSG, RxHeader.IDE, RxHeader.RTR, RxHeader.DLC, RCAN_Data, tmp_LastStep); switch(ExtID_Of_RX_MSG.Fields.SensorType)
return; {
case SENSOR_TYPE_ACCIDENT:
break;
case SENSOR_TYPE_WARNING:
break;
case SENSOR_TYPE_CONTROL_SIGNALS:
break;
case SENSOR_TYPE_FLAGS:
break;
case SENSOR_TYPE_RESET:
ReceivedRequest.DiscreticFlags.DiscreticType.Request_Reset = 1;
break;
case SENSOR_TYPE_CHANGE_MODE:
ControlFlags.IsRtrMode = !ControlFlags.IsRtrMode;
break;
case SENSOR_TYPE_REQUEST_LIST_OF_PARAMETERS:
ReceivedRequest.DiscreticFlags.DiscreticType.Request_List_of_Parameters = 1;
break;
}
} }
if(ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_ANALOG) if(ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_ANALOG)
{ {
//Является ли полученное сообщение - запросом //Является ли полученное сообщение - запросом
if(RxHeader.RTR) if(RxHeader.RTR)
{ {
TakeRxMsgToBuffer(ExtID_Of_RX_MSG, RxHeader.IDE, RxHeader.RTR, RxHeader.DLC, RCAN_Data, tmp_LastStep); ReceivedRequest.RequestedExtID.BitAll = ExtID_Of_RX_MSG.BitAll;
return; ReceivedRequest.RequestedDLC = RxHeader.DLC;
//Определяется запрашиваемая информация
switch(ExtID_Of_RX_MSG.Fields.SensorType)
{
case SENSOR_TYPE_UNIVERSAL:
{
ReceivedRequest.AnalogFlags.AnalogType.Request_Universal_Sens=1;
break;
}
case SENSOR_TYPE_U:
{
ReceivedRequest.AnalogFlags.AnalogType.Request_U_Sens=1;
break;
}
case SENSOR_TYPE_I:
{
ReceivedRequest.AnalogFlags.AnalogType.Request_I_Sens=1;
break;
}
case SENSOR_TYPE_T:
{
ReceivedRequest.AnalogFlags.AnalogType.Request_T_Sens=1;
break;
}
}
} }
} }
if(ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_MODBUS_COIL || if(ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_MODBUS_COIL)
ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_MODBUS_DISCRETE ||
ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_MODBUS_HOLDING ||
ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_MODBUS_INPUT)
{ {
TakeRxMsgToBuffer(ExtID_Of_RX_MSG, RxHeader.IDE, RxHeader.RTR, RxHeader.DLC, RCAN_Data, tmp_LastStep); ReceivedRequest.RequestedExtID.BitAll = ExtID_Of_RX_MSG.BitAll;
return; ReceivedRequest.SensorToModbus.Sensor = SensorToModbusRegister(ReceivedRequest.RequestedExtID.Fields.SensorType, ReceivedRequest.RequestedExtID.Fields.SensorID);
ReceivedRequest.ModbusFlags.ModbusType.Coil = 1;
}
if(ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_MODBUS_DISCRETE)
{
ReceivedRequest.RequestedExtID.BitAll = ExtID_Of_RX_MSG.BitAll;
ReceivedRequest.SensorToModbus.Sensor = SensorToModbusRegister(ReceivedRequest.RequestedExtID.Fields.SensorType, ReceivedRequest.RequestedExtID.Fields.SensorID);
ReceivedRequest.ModbusFlags.ModbusType.Discrete = 1;
}
if(ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_MODBUS_HOLDING)
{
ReceivedRequest.RequestedExtID.BitAll = ExtID_Of_RX_MSG.BitAll;
ReceivedRequest.SensorToModbus.Sensor = SensorToModbusRegister(ReceivedRequest.RequestedExtID.Fields.SensorType, ReceivedRequest.RequestedExtID.Fields.SensorID);
ReceivedRequest.ModbusFlags.ModbusType.Holding = 1;
}
if(ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_MODBUS_INPUT)
{
ReceivedRequest.RequestedExtID.BitAll = ExtID_Of_RX_MSG.BitAll;
ReceivedRequest.SensorToModbus.Sensor = SensorToModbusRegister(ReceivedRequest.RequestedExtID.Fields.SensorType, ReceivedRequest.RequestedExtID.Fields.SensorID);
ReceivedRequest.ModbusFlags.ModbusType.Input = 1;
} }
} }
//Полученное сообщение - пульс устройств в сети //Полученное сообщение - пульс устройств в сети
if (ExtID_Of_RX_MSG.StandardFields.DataType == DATA_TYPE_PULSE) if (ExtID_Of_RX_MSG.Fields.DataType == DATA_TYPE_PULSE)
{ {
Device_on_the_Network[ExtID_Of_RX_MSG.StandardFields.DeviceID].Status = ONLINE; Device_on_the_Network[ExtID_Of_RX_MSG.Fields.DeviceID].Status = ONLINE;
Device_on_the_Network[ExtID_Of_RX_MSG.StandardFields.DeviceID].TimeFromLastPulse = 0; Device_on_the_Network[ExtID_Of_RX_MSG.Fields.DeviceID].TimeFromLastPulse = 0;
} }
} }
} }
/**
* @brief Функция отправки пульса устройства.
* @details Пульс устройства. Есть возможность отключить пульс по запросу.
*/
void REQUESTER_Pulse_TIM_Handler() void REQUESTER_Pulse_TIM_Handler()
{ {
if(ControlFlags.IsPulse) if(ControlFlags.IsPulse)
@ -697,11 +512,11 @@ void REQUESTER_Pulse_TIM_Handler()
static unsigned PulseStage = 0; static unsigned PulseStage = 0;
CAN_TxHeaderTypeDef TxHeader; CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailBox = 0; uint32_t TxMailBox = 0;
extID currentID; union ext_ID currentID;
currentID.BitAll = 0; currentID.BitAll = 0;
currentID.StandardFields.DeviceID = CURRENT_ID_DEVICE; currentID.Fields.DeviceID = CURRENT_ID_DEVICE;
currentID.StandardFields.DataType = DATA_TYPE_PULSE; currentID.Fields.DataType = DATA_TYPE_PULSE;
currentID.StandardFields.Route = ROUTE_SLAVE; currentID.Fields.Route = ROUTE_SLAVE;
TxHeader.ExtId = currentID.BitAll; TxHeader.ExtId = currentID.BitAll;
uint8_t data[8]; uint8_t data[8];
TxHeader.IDE = CAN_ID_EXT; TxHeader.IDE = CAN_ID_EXT;
@ -713,14 +528,10 @@ void REQUESTER_Pulse_TIM_Handler()
PulseStage = 0; PulseStage = 0;
} }
data[0] = PulseStage++; data[0] = PulseStage++;
HAL_CAN_AddTxMessage(&_HCAN, &TxHeader, data, &TxMailBox); HAL_CAN_AddTxMessage(&hcan, &TxHeader, data, &TxMailBox);
} }
} }
/**
* @brief Функция установки в RTC полученной даты/время из запроса.
* @param Байтовый массив, 7 элементов. [0] - Часы. [1] - Минуты. [2] - Секунды. [3] - Год. [4] - Месяц. [5] - Дата. [6] - День недели.
*/
void REQUESTER_RTC_SYNC(uint8_t *data) void REQUESTER_RTC_SYNC(uint8_t *data)
{ {
__HAL_RTC_WRITEPROTECTION_DISABLE(&hrtc); __HAL_RTC_WRITEPROTECTION_DISABLE(&hrtc);
@ -747,10 +558,6 @@ void REQUESTER_RTC_SYNC(uint8_t *data)
__HAL_RTC_WRITEPROTECTION_ENABLE(&hrtc); __HAL_RTC_WRITEPROTECTION_ENABLE(&hrtc);
} }
/**
* @brief Функция настройки фильтров CAN.
* @details Настройка фильтров. Фильр для приёма сообщений с главного устройства. Фильтр для приёма на текущее устройство. Фильтр для приёма пульса других устройств в сети.
*/
void REQUESTER_CAN_FILTERS() void REQUESTER_CAN_FILTERS()
{ {
//MAIN DEVICE //MAIN DEVICE
@ -768,7 +575,7 @@ void REQUESTER_CAN_FILTERS()
canFilterConfig.FilterFIFOAssignment = CAN_RX_FIFO0; canFilterConfig.FilterFIFOAssignment = CAN_RX_FIFO0;
canFilterConfig.FilterActivation = ENABLE; canFilterConfig.FilterActivation = ENABLE;
canFilterConfig.SlaveStartFilterBank = 14; canFilterConfig.SlaveStartFilterBank = 14;
if(HAL_CAN_ConfigFilter(&_HCAN, &canFilterConfig) != HAL_OK) if(HAL_CAN_ConfigFilter(&hcan, &canFilterConfig) != HAL_OK)
{ {
Error_Handler(); Error_Handler();
} }
@ -782,7 +589,7 @@ void REQUESTER_CAN_FILTERS()
/*Маска 1.1111.1110.<...>. Нули - любые символы. Единицы - точное соответствие фильтру выше.*/ /*Маска 1.1111.1110.<...>. Нули - любые символы. Единицы - точное соответствие фильтру выше.*/
canFilterConfig.FilterMaskIdHigh = (uint16_t)(CAN_DEVICE_ID_FILTER>>13); canFilterConfig.FilterMaskIdHigh = (uint16_t)(CAN_DEVICE_ID_FILTER>>13);
canFilterConfig.FilterMaskIdLow = (uint16_t)(CAN_DEVICE_ID_FILTER<<3) | CAN_IDE_32; canFilterConfig.FilterMaskIdLow = (uint16_t)(CAN_DEVICE_ID_FILTER<<3) | CAN_IDE_32;
if(HAL_CAN_ConfigFilter(&_HCAN, &canFilterConfig) != HAL_OK) if(HAL_CAN_ConfigFilter(&hcan, &canFilterConfig) != HAL_OK)
{ {
Error_Handler(); Error_Handler();
} }
@ -793,7 +600,7 @@ void REQUESTER_CAN_FILTERS()
canFilterConfig.FilterIdLow = (uint16_t)(0x03000000<<5) | CAN_IDE_32; canFilterConfig.FilterIdLow = (uint16_t)(0x03000000<<5) | CAN_IDE_32;
canFilterConfig.FilterMaskIdHigh = (uint16_t)(CAN_DATA_TYPE_FILTER>>13); // we're checking only high 13 bits, that contained "key" canFilterConfig.FilterMaskIdHigh = (uint16_t)(CAN_DATA_TYPE_FILTER>>13); // we're checking only high 13 bits, that contained "key"
canFilterConfig.FilterMaskIdLow = (uint16_t)(CAN_DATA_TYPE_FILTER<<3) | CAN_IDE_32; // 1<<2 - set IDE bit canFilterConfig.FilterMaskIdLow = (uint16_t)(CAN_DATA_TYPE_FILTER<<3) | CAN_IDE_32; // 1<<2 - set IDE bit
if(HAL_CAN_ConfigFilter(&_HCAN, &canFilterConfig) != HAL_OK) if(HAL_CAN_ConfigFilter(&hcan, &canFilterConfig) != HAL_OK)
{ {
Error_Handler(); Error_Handler();
} }
@ -805,18 +612,7 @@ void REQUESTER_CAN_FILTERS()
canFilterConfig.FilterIdLow = (uint16_t)(HighIdFilter(DATA_TYPE_PULSE)<<5) | CAN_IDE_32; canFilterConfig.FilterIdLow = (uint16_t)(HighIdFilter(DATA_TYPE_PULSE)<<5) | CAN_IDE_32;
canFilterConfig.FilterMaskIdHigh = (uint16_t)(CAN_DATA_TYPE_FILTER>>13); // we're checking only high 13 bits, that contained "key" canFilterConfig.FilterMaskIdHigh = (uint16_t)(CAN_DATA_TYPE_FILTER>>13); // we're checking only high 13 bits, that contained "key"
canFilterConfig.FilterMaskIdLow = (uint16_t)(CAN_DATA_TYPE_FILTER<<3) | CAN_IDE_32; // 1<<2 - set IDE bit canFilterConfig.FilterMaskIdLow = (uint16_t)(CAN_DATA_TYPE_FILTER<<3) | CAN_IDE_32; // 1<<2 - set IDE bit
if(HAL_CAN_ConfigFilter(&_HCAN, &canFilterConfig) != HAL_OK) if(HAL_CAN_ConfigFilter(&hcan, &canFilterConfig) != HAL_OK)
{
Error_Handler();
}
//DEBUG FILTER "ALL IDE WELCOME"
canFilterConfig.FilterBank = 4;
canFilterConfig.FilterIdHigh = (uint16_t)(HighIdFilter(0)>>13);
canFilterConfig.FilterIdLow = (uint16_t)(HighIdFilter(0)<<5) | CAN_IDE_32;
canFilterConfig.FilterMaskIdHigh = (uint16_t)(0>>13); // we're checking only high 13 bits, that contained "key"
canFilterConfig.FilterMaskIdLow = (uint16_t)(0<<3) | CAN_IDE_32; // 1<<2 - set IDE bit
if(HAL_CAN_ConfigFilter(&_HCAN, &canFilterConfig) != HAL_OK)
{ {
Error_Handler(); Error_Handler();
} }

6
Core/Src/stm32f1xx_it.c
View File

@ -22,6 +22,7 @@
#include "stm32f1xx_it.h" #include "stm32f1xx_it.h"
/* Private includes ----------------------------------------------------------*/ /* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "custom_flash.h"
#include "requester.h" #include "requester.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
@ -64,7 +65,10 @@ extern UART_HandleTypeDef huart3;
extern TIM_HandleTypeDef htim8; extern TIM_HandleTypeDef htim8;
/* USER CODE BEGIN EV */ /* USER CODE BEGIN EV */
extern uint8_t Data2Write[PAGE_SIZE*2];
extern uint8_t ReceiveDataUART[4];
extern struct flag FLAGS;
extern int cnt_tim_reset;
/* USER CODE END EV */ /* USER CODE END EV */
/******************************************************************************/ /******************************************************************************/

776
MDK-ARM/CAN_Request-Response_protocol.uvoptx
View File

@ -1,776 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
<SchemaVersion>1.0</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Extensions>
<cExt>*.c</cExt>
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>
<DaveTm>
<dwLowDateTime>0</dwLowDateTime>
<dwHighDateTime>0</dwHighDateTime>
</DaveTm>
<Target>
<TargetName>CAN_Request-Response_protocol</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<CLKADS>8000000</CLKADS>
<OPTTT>
<gFlags>1</gFlags>
<BeepAtEnd>1</BeepAtEnd>
<RunSim>0</RunSim>
<RunTarget>1</RunTarget>
<RunAbUc>0</RunAbUc>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
<FlashByte>65535</FlashByte>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
</OPTHX>
<OPTLEX>
<PageWidth>79</PageWidth>
<PageLength>66</PageLength>
<TabStop>8</TabStop>
<ListingPath></ListingPath>
</OPTLEX>
<ListingPage>
<CreateCListing>1</CreateCListing>
<CreateAListing>1</CreateAListing>
<CreateLListing>1</CreateLListing>
<CreateIListing>0</CreateIListing>
<AsmCond>1</AsmCond>
<AsmSymb>1</AsmSymb>
<AsmXref>0</AsmXref>
<CCond>1</CCond>
<CCode>0</CCode>
<CListInc>0</CListInc>
<CSymb>0</CSymb>
<LinkerCodeListing>0</LinkerCodeListing>
</ListingPage>
<OPTXL>
<LMap>1</LMap>
<LComments>1</LComments>
<LGenerateSymbols>1</LGenerateSymbols>
<LLibSym>1</LLibSym>
<LLines>1</LLines>
<LLocSym>1</LLocSym>
<LPubSym>1</LPubSym>
<LXref>0</LXref>
<LExpSel>0</LExpSel>
</OPTXL>
<OPTFL>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>1</IsCurrentTarget>
</OPTFL>
<CpuCode>18</CpuCode>
<DebugOpt>
<uSim>0</uSim>
<uTrg>1</uTrg>
<sLdApp>1</sLdApp>
<sGomain>1</sGomain>
<sRbreak>1</sRbreak>
<sRwatch>1</sRwatch>
<sRmem>1</sRmem>
<sRfunc>1</sRfunc>
<sRbox>1</sRbox>
<tLdApp>1</tLdApp>
<tGomain>1</tGomain>
<tRbreak>1</tRbreak>
<tRwatch>1</tRwatch>
<tRmem>1</tRmem>
<tRfunc>1</tRfunc>
<tRbox>1</tRbox>
<tRtrace>1</tRtrace>
<sRSysVw>1</sRSysVw>
<tRSysVw>1</tRSysVw>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>4</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
<sDlgPa></sDlgPa>
<sIfile></sIfile>
<tDll></tDll>
<tDllPa></tDllPa>
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMRTXEVENTFLAGS</Key>
<Name>-L70 -Z18 -C0 -M0 -T1</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGTARM</Key>
<Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMDBGFLAGS</Key>
<Name></Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>JL2CM3</Key>
<Name>-U -O14 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(4BA00477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F103RG$Flash\STM32F10x_1024.FLM)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGUARM</Key>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>UL2CM3</Key>
<Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F103RG$Flash\STM32F10x_1024.FLM))</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>ST-LINKIII-KEIL_SWO</Key>
<Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F103RG$Flash\STM32F10x_1024.FLM)</Name>
</SetRegEntry>
</TargetDriverDllRegistry>
<Breakpoint/>
<Tracepoint>
<THDelay>0</THDelay>
</Tracepoint>
<DebugFlag>
<trace>0</trace>
<periodic>1</periodic>
<aLwin>1</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
<aPa>0</aPa>
<viewmode>1</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>0</aTbox>
<AscS1>0</AscS1>
<AscS2>0</AscS2>
<AscS3>0</AscS3>
<aSer3>0</aSer3>
<eProf>0</eProf>
<aLa>0</aLa>
<aPa1>0</aPa1>
<AscS4>0</AscS4>
<aSer4>0</aSer4>
<StkLoc>1</StkLoc>
<TrcWin>0</TrcWin>
<newCpu>0</newCpu>
<uProt>0</uProt>
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
<bLintAuto>0</bLintAuto>
<bAutoGenD>0</bAutoGenD>
<LntExFlags>0</LntExFlags>
<pMisraName></pMisraName>
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
<DebugDescription>
<Enable>1</Enable>
<EnableFlashSeq>1</EnableFlashSeq>
<EnableLog>0</EnableLog>
<Protocol>2</Protocol>
<DbgClock>10000000</DbgClock>
</DebugDescription>
</TargetOption>
</Target>
<Group>
<GroupName>Application/MDK-ARM</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>1</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>startup_stm32f103xg.s</PathWithFileName>
<FilenameWithoutPath>startup_stm32f103xg.s</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Application/User/Core</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/main.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/gpio.c</PathWithFileName>
<FilenameWithoutPath>gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/can.c</PathWithFileName>
<FilenameWithoutPath>can.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/dma.c</PathWithFileName>
<FilenameWithoutPath>dma.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/rtc.c</PathWithFileName>
<FilenameWithoutPath>rtc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>7</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/sdio.c</PathWithFileName>
<FilenameWithoutPath>sdio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>8</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/tim.c</PathWithFileName>
<FilenameWithoutPath>tim.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/usart.c</PathWithFileName>
<FilenameWithoutPath>usart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>10</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/stm32f1xx_it.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_it.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>11</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/stm32f1xx_hal_msp.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_msp.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>12</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/stm32f1xx_hal_timebase_tim.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_timebase_tim.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>13</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Src\requester.c</PathWithFileName>
<FilenameWithoutPath>requester.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>14</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Inc\requester.h</PathWithFileName>
<FilenameWithoutPath>requester.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Application/User/FATFS/Target</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>15</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../FATFS/Target/bsp_driver_sd.c</PathWithFileName>
<FilenameWithoutPath>bsp_driver_sd.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>16</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../FATFS/Target/fatfs_platform.c</PathWithFileName>
<FilenameWithoutPath>fatfs_platform.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Application/User/FATFS/App</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>17</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../FATFS/App/fatfs.c</PathWithFileName>
<FilenameWithoutPath>fatfs.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Drivers/STM32F1xx_HAL_Driver</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>18</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_gpio_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>19</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_can.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_can.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>20</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>21</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_rcc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>22</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_rcc_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>23</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>24</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_dma.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>25</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_cortex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>26</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_pwr.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>27</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_flash.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>28</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_flash_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>29</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_exti.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>30</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_rtc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>31</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_rtc_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>32</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_sdmmc.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_ll_sdmmc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>33</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_sd.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>34</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_tim.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>35</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_tim_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>36</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_uart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Drivers/CMSIS</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>37</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/system_stm32f1xx.c</PathWithFileName>
<FilenameWithoutPath>system_stm32f1xx.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Middlewares/FatFs</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Middlewares/Third_Party/FatFs/src/diskio.c</PathWithFileName>
<FilenameWithoutPath>diskio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>39</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Middlewares/Third_Party/FatFs/src/ff.c</PathWithFileName>
<FilenameWithoutPath>ff.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>40</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Middlewares/Third_Party/FatFs/src/ff_gen_drv.c</PathWithFileName>
<FilenameWithoutPath>ff_gen_drv.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>41</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Middlewares/Third_Party/FatFs/src/option/syscall.c</PathWithFileName>
<FilenameWithoutPath>syscall.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>42</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Middlewares/Third_Party/FatFs/src/drivers/sd_diskio.c</PathWithFileName>
<FilenameWithoutPath>sd_diskio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>::CMSIS</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>1</RteFlg>
</Group>
</ProjectOpt>

650
MDK-ARM/CAN_Request-Response_protocol.uvprojx
View File

@ -1,650 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
<SchemaVersion>2.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>CAN_Request-Response_protocol</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<pArmCC>6190000::V6.19::ARMCLANG</pArmCC>
<pCCUsed>6190000::V6.19::ARMCLANG</pCCUsed>
<uAC6>1</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>STM32F103RG</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32F1xx_DFP.2.4.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IRAM(0x20000000-0x20017FFF) IROM(0x8000000-0x80FFFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") TZ</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashDriverDll></FlashDriverDll>
<DeviceId>0</DeviceId>
<RegisterFile></RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>$$Device:STM32F103RG$SVD\STM32F103xx.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
<ButtonStop>0</ButtonStop>
<NotGenerated>0</NotGenerated>
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>CAN_Request-Response_protocol\</OutputDirectory>
<OutputName>CAN_Request-Response_protocol</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>1</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>1</BrowseInformation>
<ListingPath></ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
<CreateBatchFile>0</CreateBatchFile>
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
<nStopU2X>0</nStopU2X>
</BeforeCompile>
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
<nStopB2X>0</nStopB2X>
</BeforeMake>
<AfterMake>
<RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf.exe --bin --output .\Listings\@L.bin !L</UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X>
</AfterMake>
<SelectedForBatchBuild>1</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString>
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>0</ComprImg>
</CommonProperty>
<DllOption>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments>-REMAP</SimDllArguments>
<SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM3</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments></TargetDllArguments>
<TargetDlgDll>TCM.DLL</TargetDlgDll>
<TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
</DllOption>
<DebugOption>
<OPTHX>
<HexSelection>1</HexSelection>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
<Oh166RecLen>16</Oh166RecLen>
</OPTHX>
</DebugOption>
<Utilities>
<Flash1>
<UseTargetDll>1</UseTargetDll>
<UseExternalTool>0</UseExternalTool>
<RunIndependent>0</RunIndependent>
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
<Capability>1</Capability>
<DriverSelection>4101</DriverSelection>
</Flash1>
<bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2V8M.DLL</Flash2>
<Flash3>"" ()</Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
<ArmAdsMisc>
<GenerateListings>0</GenerateListings>
<asHll>1</asHll>
<asAsm>1</asAsm>
<asMacX>1</asMacX>
<asSyms>1</asSyms>
<asFals>1</asFals>
<asDbgD>1</asDbgD>
<asForm>1</asForm>
<ldLst>0</ldLst>
<ldmm>1</ldmm>
<ldXref>1</ldXref>
<BigEnd>0</BigEnd>
<AdsALst>1</AdsALst>
<AdsACrf>1</AdsACrf>
<AdsANop>0</AdsANop>
<AdsANot>0</AdsANot>
<AdsLLst>1</AdsLLst>
<AdsLmap>1</AdsLmap>
<AdsLcgr>1</AdsLcgr>
<AdsLsym>1</AdsLsym>
<AdsLszi>1</AdsLszi>
<AdsLtoi>1</AdsLtoi>
<AdsLsun>1</AdsLsun>
<AdsLven>1</AdsLven>
<AdsLsxf>1</AdsLsxf>
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M3"</AdsCpuType>
<RvctDeviceName></RvctDeviceName>
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
<hadIROM>1</hadIROM>
<hadIRAM>1</hadIRAM>
<hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam>
<RvdsVP>0</RvdsVP>
<RvdsMve>0</RvdsMve>
<RvdsCdeCp>0</RvdsCdeCp>
<nBranchProt>0</nBranchProt>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>0</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<nSecure>0</nSecure>
<RoSelD>3</RoSelD>
<RwSelD>4</RwSelD>
<CodeSel>0</CodeSel>
<OptFeed>0</OptFeed>
<NoZi1>0</NoZi1>
<NoZi2>0</NoZi2>
<NoZi3>0</NoZi3>
<NoZi4>0</NoZi4>
<NoZi5>0</NoZi5>
<Ro1Chk>0</Ro1Chk>
<Ro2Chk>0</Ro2Chk>
<Ro3Chk>0</Ro3Chk>
<Ir1Chk>1</Ir1Chk>
<Ir2Chk>0</Ir2Chk>
<Ra1Chk>0</Ra1Chk>
<Ra2Chk>0</Ra2Chk>
<Ra3Chk>0</Ra3Chk>
<Im1Chk>1</Im1Chk>
<Im2Chk>1</Im2Chk>
<OnChipMemories>
<Ocm1>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm1>
<Ocm2>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm2>
<Ocm3>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm3>
<Ocm4>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm4>
<Ocm5>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm5>
<Ocm6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm6>
<IRAM>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x18000</Size>
</IRAM>
<IROM>
<Type>1</Type>
<StartAddress>0x8000000</StartAddress>
<Size>0x100000</Size>
</IROM>
<XRAM>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</XRAM>
<OCR_RVCT1>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT1>
<OCR_RVCT2>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT2>
<OCR_RVCT3>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT3>
<OCR_RVCT4>
<Type>1</Type>
<StartAddress>0x8000000</StartAddress>
<Size>0x400000</Size>
</OCR_RVCT4>
<OCR_RVCT5>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT5>
<OCR_RVCT6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT6>
<OCR_RVCT7>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT7>
<OCR_RVCT8>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT8>
<OCR_RVCT9>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x18000</Size>
</OCR_RVCT9>
<OCR_RVCT10>
<Type>0</Type>
<StartAddress>0x20018000</StartAddress>
<Size>0x1000</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector></RvctStartVector>
</ArmAdsMisc>
<Cads>
<interw>1</interw>
<Optim>1</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>1</OneElfS>
<Strict>0</Strict>
<EnumInt>0</EnumInt>
<PlainCh>0</PlainCh>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<wLevel>3</wLevel>
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>1</uC99>
<uGnu>0</uGnu>
<useXO>1</useXO>
<v6Lang>3</v6Lang>
<v6LangP>5</v6LangP>
<vShortEn>1</vShortEn>
<vShortWch>1</vShortWch>
<v6Lto>0</v6Lto>
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls></MiscControls>
<Define>USE_HAL_DRIVER,STM32F103xG</Define>
<Undefine></Undefine>
<IncludePath>../Core/Inc;../FATFS/Target;../FATFS/App;../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Middlewares/Third_Party/FatFs/src;../Middlewares/Third_Party/FatFs/src/drivers;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include</IncludePath>
</VariousControls>
</Cads>
<Aads>
<interw>1</interw>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<thumb>0</thumb>
<SplitLS>0</SplitLS>
<SwStkChk>0</SwStkChk>
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<ClangAsOpt>1</ClangAsOpt>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
<umfTarg>1</umfTarg>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<noStLib>0</noStLib>
<RepFail>1</RepFail>
<useFile>0</useFile>
<TextAddressRange></TextAddressRange>
<DataAddressRange></DataAddressRange>
<pXoBase></pXoBase>
<ScatterFile></ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc></Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
<Groups>
<Group>
<GroupName>Application/MDK-ARM</GroupName>
<Files>
<File>
<FileName>startup_stm32f103xg.s</FileName>
<FileType>2</FileType>
<FilePath>startup_stm32f103xg.s</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Application/User/Core</GroupName>
<Files>
<File>
<FileName>main.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/main.c</FilePath>
</File>
<File>
<FileName>gpio.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/gpio.c</FilePath>
</File>
<File>
<FileName>can.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/can.c</FilePath>
</File>
<File>
<FileName>dma.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/dma.c</FilePath>
</File>
<File>
<FileName>rtc.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/rtc.c</FilePath>
</File>
<File>
<FileName>sdio.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/sdio.c</FilePath>
</File>
<File>
<FileName>tim.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/tim.c</FilePath>
</File>
<File>
<FileName>usart.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/usart.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_it.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/stm32f1xx_it.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/stm32f1xx_hal_msp.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_timebase_tim.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/stm32f1xx_hal_timebase_tim.c</FilePath>
</File>
<File>
<FileName>requester.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\requester.c</FilePath>
</File>
<File>
<FileName>requester.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Inc\requester.h</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Application/User/FATFS/Target</GroupName>
<Files>
<File>
<FileName>bsp_driver_sd.c</FileName>
<FileType>1</FileType>
<FilePath>../FATFS/Target/bsp_driver_sd.c</FilePath>
</File>
<File>
<FileName>fatfs_platform.c</FileName>
<FileType>1</FileType>
<FilePath>../FATFS/Target/fatfs_platform.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Application/User/FATFS/App</GroupName>
<Files>
<File>
<FileName>fatfs.c</FileName>
<FileType>1</FileType>
<FilePath>../FATFS/App/fatfs.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers/STM32F1xx_HAL_Driver</GroupName>
<Files>
<File>
<FileName>stm32f1xx_hal_gpio_ex.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_can.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_can.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_rcc.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_rcc_ex.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_dma.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_cortex.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_pwr.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_flash.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_flash_ex.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_exti.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_rtc.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_rtc_ex.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_ll_sdmmc.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_sdmmc.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_sd.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_tim.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_tim_ex.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_uart.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers/CMSIS</GroupName>
<Files>
<File>
<FileName>system_stm32f1xx.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/system_stm32f1xx.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Middlewares/FatFs</GroupName>
<Files>
<File>
<FileName>diskio.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/Third_Party/FatFs/src/diskio.c</FilePath>
</File>
<File>
<FileName>ff.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/Third_Party/FatFs/src/ff.c</FilePath>
</File>
<File>
<FileName>ff_gen_drv.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/Third_Party/FatFs/src/ff_gen_drv.c</FilePath>
</File>
<File>
<FileName>syscall.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/Third_Party/FatFs/src/option/syscall.c</FilePath>
</File>
<File>
<FileName>sd_diskio.c</FileName>
<FileType>1</FileType>
<FilePath>../Middlewares/Third_Party/FatFs/src/drivers/sd_diskio.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>::CMSIS</GroupName>
</Group>
</Groups>
</Target>
</Targets>
<RTE>
<apis/>
<components>
<component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.6.0" condition="ARMv6_7_8-M Device">
<package name="CMSIS" schemaVersion="1.7.7" url="http://www.keil.com/pack/" vendor="ARM" version="5.9.0"/>
<targetInfos>
<targetInfo name="CAN_Request-Response_protocol"/>
</targetInfos>
</component>
</components>
<files/>
</RTE>
</Project>

19
MDK-ARM/CAN_Request-Response_protocol/CAN_Request-Response_protocol.sct
View File

@ -1,19 +0,0 @@
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08000000 0x00400000 { ; load region size_region
ER_IROM1 0x08000000 0x00400000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
.ANY (+XO)
}
RW_IRAM1 0x20000000 0x00018000 { ; RW data
.ANY (+RW +ZI)
}
RW_IRAM2 0x20018000 0x00001000 {
.ANY (+RW +ZI)
}
}

36
MDK-ARM/DebugConfig/CAN_Request-Response_protocol_STM32F103RG_1.0.0.dbgconf
View File

@ -1,36 +0,0 @@
// File: STM32F101_102_103_105_107.dbgconf
// Version: 1.0.0
// Note: refer to STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx Reference manual (RM0008)
// STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx datasheets
// <<< Use Configuration Wizard in Context Menu >>>
// <h> Debug MCU configuration register (DBGMCU_CR)
// <i> Reserved bits must be kept at reset value
// <o.30> DBG_TIM11_STOP <i> TIM11 counter stopped when core is halted
// <o.29> DBG_TIM10_STOP <i> TIM10 counter stopped when core is halted
// <o.28> DBG_TIM9_STOP <i> TIM9 counter stopped when core is halted
// <o.27> DBG_TIM14_STOP <i> TIM14 counter stopped when core is halted
// <o.26> DBG_TIM13_STOP <i> TIM13 counter stopped when core is halted
// <o.25> DBG_TIM12_STOP <i> TIM12 counter stopped when core is halted
// <o.21> DBG_CAN2_STOP <i> Debug CAN2 stopped when core is halted
// <o.20> DBG_TIM7_STOP <i> TIM7 counter stopped when core is halted
// <o.19> DBG_TIM6_STOP <i> TIM6 counter stopped when core is halted
// <o.18> DBG_TIM5_STOP <i> TIM5 counter stopped when core is halted
// <o.17> DBG_TIM8_STOP <i> TIM8 counter stopped when core is halted
// <o.16> DBG_I2C2_SMBUS_TIMEOUT <i> SMBUS timeout mode stopped when core is halted
// <o.15> DBG_I2C1_SMBUS_TIMEOUT <i> SMBUS timeout mode stopped when core is halted
// <o.14> DBG_CAN1_STOP <i> Debug CAN1 stopped when Core is halted
// <o.13> DBG_TIM4_STOP <i> TIM4 counter stopped when core is halted
// <o.12> DBG_TIM3_STOP <i> TIM3 counter stopped when core is halted
// <o.11> DBG_TIM2_STOP <i> TIM2 counter stopped when core is halted
// <o.10> DBG_TIM1_STOP <i> TIM1 counter stopped when core is halted
// <o.9> DBG_WWDG_STOP <i> Debug window watchdog stopped when core is halted
// <o.8> DBG_IWDG_STOP <i> Debug independent watchdog stopped when core is halted
// <o.2> DBG_STANDBY <i> Debug standby mode
// <o.1> DBG_STOP <i> Debug stop mode
// <o.0> DBG_SLEEP <i> Debug sleep mode
// </h>
DbgMCU_CR = 0x00000007;
// <<< end of configuration section >>>

36
MDK-ARM/DebugConfig/stm32f103rgtx_CAN_Request_Response_protocol_STM32F103RG_1.0.0.dbgconf
View File

@ -1,36 +0,0 @@
// File: STM32F101_102_103_105_107.dbgconf
// Version: 1.0.0
// Note: refer to STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx Reference manual (RM0008)
// STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx datasheets
// <<< Use Configuration Wizard in Context Menu >>>
// <h> Debug MCU configuration register (DBGMCU_CR)
// <i> Reserved bits must be kept at reset value
// <o.30> DBG_TIM11_STOP <i> TIM11 counter stopped when core is halted
// <o.29> DBG_TIM10_STOP <i> TIM10 counter stopped when core is halted
// <o.28> DBG_TIM9_STOP <i> TIM9 counter stopped when core is halted
// <o.27> DBG_TIM14_STOP <i> TIM14 counter stopped when core is halted
// <o.26> DBG_TIM13_STOP <i> TIM13 counter stopped when core is halted
// <o.25> DBG_TIM12_STOP <i> TIM12 counter stopped when core is halted
// <o.21> DBG_CAN2_STOP <i> Debug CAN2 stopped when core is halted
// <o.20> DBG_TIM7_STOP <i> TIM7 counter stopped when core is halted
// <o.19> DBG_TIM6_STOP <i> TIM6 counter stopped when core is halted
// <o.18> DBG_TIM5_STOP <i> TIM5 counter stopped when core is halted
// <o.17> DBG_TIM8_STOP <i> TIM8 counter stopped when core is halted
// <o.16> DBG_I2C2_SMBUS_TIMEOUT <i> SMBUS timeout mode stopped when core is halted
// <o.15> DBG_I2C1_SMBUS_TIMEOUT <i> SMBUS timeout mode stopped when core is halted
// <o.14> DBG_CAN1_STOP <i> Debug CAN1 stopped when Core is halted
// <o.13> DBG_TIM4_STOP <i> TIM4 counter stopped when core is halted
// <o.12> DBG_TIM3_STOP <i> TIM3 counter stopped when core is halted
// <o.11> DBG_TIM2_STOP <i> TIM2 counter stopped when core is halted
// <o.10> DBG_TIM1_STOP <i> TIM1 counter stopped when core is halted
// <o.9> DBG_WWDG_STOP <i> Debug window watchdog stopped when core is halted
// <o.8> DBG_IWDG_STOP <i> Debug independent watchdog stopped when core is halted
// <o.2> DBG_STANDBY <i> Debug standby mode
// <o.1> DBG_STOP <i> Debug stop mode
// <o.0> DBG_SLEEP <i> Debug sleep mode
// </h>
DbgMCU_CR = 0x00000007;
// <<< end of configuration section >>>

21
MDK-ARM/RTE/_CAN_Request-Response_protocol/RTE_Components.h
View File

@ -1,21 +0,0 @@
/*
* Auto generated Run-Time-Environment Configuration File
* *** Do not modify ! ***
*
* Project: 'CAN_Request-Response_protocol'
* Target: 'CAN_Request-Response_protocol'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "stm32f10x.h"
#endif /* RTE_COMPONENTS_H */

21
MDK-ARM/RTE/_stm32f103rgtx_CAN_Request_Response_protocol/RTE_Components.h
View File

@ -1,21 +0,0 @@
/*
* Auto generated Run-Time-Environment Configuration File
* *** Do not modify ! ***
*
* Project: 'stm32f103rgtx_bootloader'
* Target: 'stm32f103rgtx_CAN_Request_Response_protocol'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "stm32f10x.h"
#endif /* RTE_COMPONENTS_H */

120
MDK-ARM/stm32f103rgtx_bootloader.uvoptx
View File

@ -22,7 +22,7 @@
</DaveTm> </DaveTm>
<Target> <Target>
<TargetName>stm32f103rgtx_CAN_Request_Response_protocol</TargetName> <TargetName>stm32f103rgtx_bootloader</TargetName>
<ToolsetNumber>0x4</ToolsetNumber> <ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName> <ToolsetName>ARM-ADS</ToolsetName>
<TargetOption> <TargetOption>
@ -327,6 +327,42 @@
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>2</FileNumber> <FileNumber>2</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Src\custom_flash.c</PathWithFileName>
<FilenameWithoutPath>custom_flash.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Inc\custom_flash.h</PathWithFileName>
<FilenameWithoutPath>custom_flash.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Inc\boot_project_setup.h</PathWithFileName>
<FilenameWithoutPath>boot_project_setup.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>5</FileType> <FileType>5</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -338,7 +374,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>3</FileNumber> <FileNumber>6</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -350,9 +386,9 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>4</FileNumber> <FileNumber>7</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>1</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>../Core/Src/main.c</PathWithFileName> <PathWithFileName>../Core/Src/main.c</PathWithFileName>
@ -362,7 +398,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber> <FileNumber>8</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -374,7 +410,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>6</FileNumber> <FileNumber>9</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -386,7 +422,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>7</FileNumber> <FileNumber>10</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -398,7 +434,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>8</FileNumber> <FileNumber>11</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -410,7 +446,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>9</FileNumber> <FileNumber>12</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -422,7 +458,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>10</FileNumber> <FileNumber>13</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -434,7 +470,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>11</FileNumber> <FileNumber>14</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -446,7 +482,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>12</FileNumber> <FileNumber>15</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -458,7 +494,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>13</FileNumber> <FileNumber>16</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -470,7 +506,7 @@
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>14</FileNumber> <FileNumber>17</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -490,7 +526,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>15</FileNumber> <FileNumber>18</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -502,7 +538,7 @@
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>16</FileNumber> <FileNumber>19</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -522,7 +558,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>4</GroupNumber>
<FileNumber>17</FileNumber> <FileNumber>20</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -542,7 +578,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>18</FileNumber> <FileNumber>21</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -554,7 +590,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>19</FileNumber> <FileNumber>22</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -566,7 +602,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>20</FileNumber> <FileNumber>23</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -578,7 +614,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>21</FileNumber> <FileNumber>24</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -590,7 +626,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>22</FileNumber> <FileNumber>25</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -602,7 +638,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>23</FileNumber> <FileNumber>26</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -614,7 +650,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>24</FileNumber> <FileNumber>27</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -626,7 +662,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>25</FileNumber> <FileNumber>28</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -638,7 +674,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>26</FileNumber> <FileNumber>29</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -650,7 +686,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>27</FileNumber> <FileNumber>30</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -662,7 +698,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>28</FileNumber> <FileNumber>31</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -674,7 +710,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>29</FileNumber> <FileNumber>32</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -686,7 +722,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>30</FileNumber> <FileNumber>33</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -698,7 +734,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>31</FileNumber> <FileNumber>34</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -710,7 +746,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>32</FileNumber> <FileNumber>35</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -722,7 +758,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>33</FileNumber> <FileNumber>36</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -734,7 +770,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>34</FileNumber> <FileNumber>37</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -746,7 +782,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>35</FileNumber> <FileNumber>38</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -758,7 +794,7 @@
</File> </File>
<File> <File>
<GroupNumber>5</GroupNumber> <GroupNumber>5</GroupNumber>
<FileNumber>36</FileNumber> <FileNumber>39</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -778,7 +814,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>6</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>37</FileNumber> <FileNumber>40</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -798,7 +834,7 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>38</FileNumber> <FileNumber>41</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -810,7 +846,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>39</FileNumber> <FileNumber>42</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -822,7 +858,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>40</FileNumber> <FileNumber>43</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -834,7 +870,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>41</FileNumber> <FileNumber>44</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -846,7 +882,7 @@
</File> </File>
<File> <File>
<GroupNumber>7</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>42</FileNumber> <FileNumber>45</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>

19
MDK-ARM/stm32f103rgtx_bootloader.uvprojx
View File

@ -7,7 +7,7 @@
<Targets> <Targets>
<Target> <Target>
<TargetName>stm32f103rgtx_CAN_Request_Response_protocol</TargetName> <TargetName>stm32f103rgtx_bootloader</TargetName>
<ToolsetNumber>0x4</ToolsetNumber> <ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName> <ToolsetName>ARM-ADS</ToolsetName>
<pArmCC>6190000::V6.19::ARMCLANG</pArmCC> <pArmCC>6190000::V6.19::ARMCLANG</pArmCC>
@ -395,6 +395,21 @@
<Group> <Group>
<GroupName>Application/User/Core</GroupName> <GroupName>Application/User/Core</GroupName>
<Files> <Files>
<File>
<FileName>custom_flash.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Src\custom_flash.c</FilePath>
</File>
<File>
<FileName>custom_flash.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Inc\custom_flash.h</FilePath>
</File>
<File>
<FileName>boot_project_setup.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Inc\boot_project_setup.h</FilePath>
</File>
<File> <File>
<FileName>requester.h</FileName> <FileName>requester.h</FileName>
<FileType>5</FileType> <FileType>5</FileType>
@ -844,7 +859,7 @@
<component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.6.0" condition="ARMv6_7_8-M Device"> <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.6.0" condition="ARMv6_7_8-M Device">
<package name="CMSIS" schemaVersion="1.7.7" url="http://www.keil.com/pack/" vendor="ARM" version="5.9.0"/> <package name="CMSIS" schemaVersion="1.7.7" url="http://www.keil.com/pack/" vendor="ARM" version="5.9.0"/>
<targetInfos> <targetInfos>
<targetInfo name="stm32f103rgtx_CAN_Request_Response_protocol"/> <targetInfo name="stm32f103rgtx_bootloader"/>
</targetInfos> </targetInfos>
</component> </component>
</components> </components>

2
README.md
View File

@ -1,2 +1,2 @@
# CAN_Request-Response_protocol # stm32f103rgtx

62
extID_type/extID_type_from_new_can_protocol.h
View File

@ -1,62 +0,0 @@
#ifndef _new_can_protocol_ID_struct
#define _new_can_protocol_ID_struct
//Route mode
#define ROUTE_MASTER 0
#define ROUTE_SLAVE 1
//Data Types
#define DATA_TYPE_BROADCAST 0b0000
#define DATA_TYPE_DISCRETE 0b0001
#define DATA_TYPE_ANALOG 0b0010
#define DATA_TYPE_MODBUS_COIL 0b0011
#define DATA_TYPE_MODBUS_DISCRETE 0b0100
#define DATA_TYPE_MODBUS_HOLDING 0b0101
#define DATA_TYPE_MODBUS_INPUT 0b0110
#define DATA_TYPE_ERROR 0b0111
#define DATA_TYPE_PULSE 0b1111
//Sensor Types for DATA_TYPE_BROADCAST
#define SENSOR_TYPE_BROADCAST_STATUS 0b00000
#define SENSOR_TYPE_BROADCAST_ONOFF 0b00001
#define SENSOR_TYPE_BROADCAST_RESTARTDEVICE 0b00010
#define SENSOR_TYPE_BROADCAST_RTCSETUP 0b00011
//Sensor Types for DATA_TYPE_DISCRETE
#define SENSOR_TYPE_DISCRETE_ACCIDENT 0b00000
#define SENSOR_TYPE_DISCRETE_WARNING 0b00001
#define SENSOR_TYPE_DISCRETE_CONTROL_SIGNALS 0b00010
#define SENSOR_TYPE_DISCRETE_FLAGS 0b00011
#define SENSOR_TYPE_DISCRETE_RESET 0b00100
#define SENSOR_TYPE_DISCRETE_CHANGE_MODE 0b00101
#define SENSOR_TYPE_DISCRETE_REQUEST_LIST_OF_PARAMETERS 0b00110
//Sensor Types for DATA_TYPE_ANALOG
#define SENSOR_TYPE_ANALOG_UNIVERSAL 0b00000
#define SENSOR_TYPE_ANALOG_USTAVKI 0b00001
#define SENSOR_TYPE_ANALOG_U 0b00010
#define SENSOR_TYPE_ANALOG_I 0b00011
#define SENSOR_TYPE_ANALOG_T 0b00100
//Error Code
#define NONEXISTENT_ELEMENT 0x01
typedef union _extID{
struct extID_Standard_Fields{
unsigned DeviceID:8;
unsigned SensorID:11;
unsigned SensorType:5;
unsigned DataType:4;
unsigned Route:1;
}StandardFields;
struct extID_Modbus_Fields{
unsigned DeviceID:8;
unsigned CountReg:8;
unsigned StrAdr:8;
unsigned DataType:4;
unsigned Route:1;
}ModbusFields;
unsigned int BitAll:29;
}extID;
#endif

16
CAN_Request-Response_protocol.ioc → stm32f103rgtx_bootloader.ioc
View File

@ -5,12 +5,12 @@ CAD.provider=
CAN.ABOM=ENABLE CAN.ABOM=ENABLE
CAN.BS1=CAN_BS1_13TQ CAN.BS1=CAN_BS1_13TQ
CAN.BS2=CAN_BS2_2TQ CAN.BS2=CAN_BS2_2TQ
CAN.CalculateBaudRate=1000000 CAN.CalculateBaudRate=50000
CAN.CalculateTimeBit=1000 CAN.CalculateTimeBit=20000
CAN.CalculateTimeQuantum=62.5 CAN.CalculateTimeQuantum=1250.0
CAN.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,Prescaler,BS2,BS1,SJW,ABOM,TXFP,Mode CAN.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,Prescaler,BS2,BS1,SJW,ABOM,TXFP,Mode
CAN.Mode=CAN_MODE_LOOPBACK CAN.Mode=CAN_MODE_LOOPBACK
CAN.Prescaler=2 CAN.Prescaler=40
CAN.SJW=CAN_SJW_1TQ CAN.SJW=CAN_SJW_1TQ
CAN.TXFP=ENABLE CAN.TXFP=ENABLE
Dma.Request0=SDIO Dma.Request0=SDIO
@ -169,8 +169,8 @@ ProjectManager.MainLocation=Core/Src
ProjectManager.NoMain=false ProjectManager.NoMain=false
ProjectManager.PreviousToolchain= ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=CAN_Request-Response_protocol.ioc ProjectManager.ProjectFileName=stm32f103rgtx_bootloader.ioc
ProjectManager.ProjectName=CAN_Request-Response_protocol ProjectManager.ProjectName=stm32f103rgtx_bootloader
ProjectManager.ProjectStructure= ProjectManager.ProjectStructure=
ProjectManager.RegisterCallBack= ProjectManager.RegisterCallBack=
ProjectManager.StackSize=0x400 ProjectManager.StackSize=0x400
@ -209,8 +209,8 @@ RTC.IPParameters=Format,AutoPrediv
SDIO.ClockDiv=4 SDIO.ClockDiv=4
SDIO.IPParameters=ClockDiv SDIO.IPParameters=ClockDiv
TIM7.IPParameters=Prescaler,Period TIM7.IPParameters=Prescaler,Period
TIM7.Period=1000 TIM7.Period=3000
TIM7.Prescaler=64000-1 TIM7.Prescaler=8000-1
USART3.BaudRate=9600*2 USART3.BaudRate=9600*2
USART3.IPParameters=VirtualMode,BaudRate USART3.IPParameters=VirtualMode,BaudRate
USART3.VirtualMode=VM_ASYNC USART3.VirtualMode=VM_ASYNC