Andrey
1e911e5250
Перейти на компактные 12-словные записи v4 и сохранять 10 процентов банка после отключения. Добавить трёхсекундное ожидание роста ЗПТ и настраиваемый лимит пусков. Явно инициализировать состояние UART и гарантировать публикацию параметров EEPROM перед запуском Timer2. Сохранить воспроизводимые сборки, регрессионные проверки, документацию и обновлённые результаты сборки; исключить временные артефакты.
8.4 KiB
8.4 KiB
Проверка комментариев и кодировки
Проверка относится к редактируемым исходникам C/H, ASM, CMD, тестовым INC и Python. Для каждой непустой строки кода проверяется русский текст на ней или непосредственно перед ней. Пустые строки, текст комментариев и содержимое многострочных строк данных не считаются кодом. Качество и достоверность пояснений этой проверкой не устанавливаются; совпадение возможно и в строковом литерале. Охват: исходники из Git-индекса. Сгенерированные файлы и подключённые соседние библиотеки проверяются отдельно. Исходные уведомления TI сохранены. JSON-паспорта, индексы IDE, таблицы XLS и двоичные результаты сборки не допускают исходных комментариев; их назначение описано в документации.
UTF-8 проверен в 157 текстовых файлах. Строк кода: 18866.
| Файл | Строк кода | С русским текстом рядом |
|---|---|---|
| Bin/EepromPublishFix/rebuild.py | 41 | 41 |
| Bin/StartupWait3s/rebuild.py | 41 | 41 |
| Bin/UartColdStart/rebuild.py | 41 | 41 |
| F28335.cmd | 69 | 69 |
| Source/External/v120/DSP2833x_common/include/DSP2833x_DefaultIsr.h | 89 | 89 |
| Source/External/v120/DSP2833x_common/include/DSP2833x_Dma_defines.h | 44 | 44 |
| Source/External/v120/DSP2833x_common/include/DSP2833x_EPwm_defines.h | 89 | 89 |
| Source/External/v120/DSP2833x_common/include/DSP2833x_Examples.h | 33 | 33 |
| Source/External/v120/DSP2833x_common/include/DSP2833x_GlobalPrototypes.h | 156 | 156 |
| Source/External/v120/DSP2833x_common/include/DSP2833x_I2c_defines.h | 58 | 58 |
| Source/External/v120/DSP2833x_common/include/DSP2833x_SWPrioritizedIsrLevels.h | 5097 | 5097 |
| Source/External/v120/DSP2833x_common/include/DSP28x_Project.h | 5 | 5 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_ADC_cal.asm | 8 | 8 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_Adc.c | 14 | 14 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_CpuTimers.c | 45 | 45 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_PieCtrl.c | 37 | 37 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_PieVect.c | 143 | 143 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_SWPrioritizedDefaultIsr.c | 1012 | 1012 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_SWPrioritizedPieVect.c | 392 | 392 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_SysCtrl.c | 188 | 188 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_Xintf.c | 123 | 123 |
| Source/External/v120/DSP2833x_common/source/DSP2833x_usDelay.asm | 7 | 7 |
| Source/External/v120/DSP2833x_headers/cmd/DSP2833x_Headers_BIOS.cmd | 107 | 107 |
| Source/External/v120/DSP2833x_headers/cmd/DSP2833x_Headers_nonBIOS.cmd | 108 | 108 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_Adc.h | 201 | 201 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_CpuTimers.h | 93 | 93 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_DMA.h | 142 | 142 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_DevEmu.h | 57 | 57 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_Device.h | 287 | 287 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_ECan.h | 948 | 948 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_ECap.h | 94 | 94 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_EPwm.h | 297 | 297 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_EQep.h | 165 | 165 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_Gpio.h | 320 | 320 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_I2c.h | 126 | 126 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_Mcbsp.h | 584 | 584 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_PieCtrl.h | 107 | 107 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_PieVect.h | 141 | 141 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_Sci.h | 142 | 142 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_Spi.h | 109 | 109 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_SysCtrl.h | 259 | 259 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_XIntrupt.h | 44 | 44 |
| Source/External/v120/DSP2833x_headers/include/DSP2833x_Xintf.h | 77 | 77 |
| Source/External/v120/DSP2833x_headers/source/DSP2833x_GlobalVariableDefs.c | 301 | 301 |
| Source/Internal/ADC.c | 244 | 244 |
| Source/Internal/DAC.c | 253 | 253 |
| Source/Internal/Include/ADC.h | 4 | 4 |
| Source/Internal/Include/DAC.h | 11 | 11 |
| Source/Internal/Include/GPIO_table.h | 329 | 329 |
| Source/Internal/Include/RS485.h | 84 | 84 |
| Source/Internal/Include/bios_dsp.h | 42 | 42 |
| Source/Internal/Include/caliber.h | 35 | 35 |
| Source/Internal/Include/cntrl_adr.h | 17 | 17 |
| Source/Internal/Include/crc16.h | 6 | 6 |
| Source/Internal/Include/ecan.h | 4 | 4 |
| Source/Internal/Include/eeprom_config.h | 9 | 9 |
| Source/Internal/Include/filter_bat2.h | 36 | 36 |
| Source/Internal/Include/gas167.h | 17 | 17 |
| Source/Internal/Include/kanal.h | 1 | 1 |
| Source/Internal/Include/log_to_mem.h | 36 | 36 |
| Source/Internal/Include/measure.h | 90 | 90 |
| Source/Internal/Include/message.h | 32 | 32 |
| Source/Internal/Include/package.h | 128 | 128 |
| Source/Internal/Include/peripher.h | 128 | 128 |
| Source/Internal/Include/pulto.h | 1 | 1 |
| Source/Internal/Include/spise2p.h | 74 | 74 |
| Source/Internal/Include/tools.h | 5 | 5 |
| Source/Internal/Include/ump_can_protocol.h | 8 | 8 |
| Source/Internal/RS485.c | 534 | 534 |
| Source/Internal/bios.c | 236 | 236 |
| Source/Internal/cntrl_adr.c | 17 | 17 |
| Source/Internal/crc16.c | 158 | 158 |
| Source/Internal/ecan.c | 236 | 236 |
| Source/Internal/filter_bat2.c | 12 | 12 |
| Source/Internal/gas167.c | 54 | 54 |
| Source/Internal/kanal.c | 153 | 153 |
| Source/Internal/log_to_mem.c | 217 | 217 |
| Source/Internal/main.c | 167 | 167 |
| Source/Internal/measure.c | 625 | 625 |
| Source/Internal/message.c | 293 | 293 |
| Source/Internal/peripher.c | 227 | 227 |
| Source/Internal/pulto.c | 88 | 88 |
| Source/Internal/shared_ump.c | 4 | 4 |
| Source/Internal/spise2p.c | 326 | 326 |
| Source/Internal/tools.c | 31 | 31 |
| UKSSTMS320F28335/28335_RAM_lnk.cmd | 58 | 58 |
| UKSSTMS320F28335/firmware_version.h | 6 | 6 |
| UKSSTMS320F28335/prepare_identity.py | 41 | 41 |
| tests/comments/run_test.py | 129 | 129 |
| tests/eeprom_profiles/check_publication.py | 18 | 18 |
| tests/eeprom_profiles/run_test.py | 20 | 20 |
| tests/eeprom_profiles/spi_test.c | 46 | 46 |
| tests/eeprom_profiles/stubs/DSP2833x_Device.h | 22 | 22 |
| tests/firmware_identity/check_build.py | 35 | 35 |
| tests/firmware_identity/port_test.c | 29 | 29 |
| tests/gas167/check_image.py | 44 | 44 |
| tests/gas167/gas167_test.c | 213 | 213 |
| tests/gas167/run_test.py | 49 | 49 |
| tests/load_control/load_control_test.c | 170 | 170 |
| tests/load_control/run_test.py | 15 | 15 |
| tests/load_control/stubs/DSP2833x_Device.h | 9 | 9 |
| tests/load_control/stubs/DSP2833x_SWPrioritizedIsrLevels.h | 0 | 0 |
| tests/load_control/stubs/RS485.h | 0 | 0 |
| tests/load_control/stubs/filter_bat2.h | 0 | 0 |
| tests/load_control/stubs/measure.h | 4 | 4 |
| tests/load_control/stubs/message.h | 1 | 1 |
| tests/load_control/stubs/package.h | 18 | 18 |
| tests/load_control/stubs/peripher.h | 14 | 14 |
| tests/load_control/stubs/tools.h | 0 | 0 |
| tests/rs232_fifo/model.inc | 122 | 122 |
| tests/rs232_fifo/run_test.py | 53 | 53 |
| tests/ump_logger/init_test.c | 44 | 44 |
| tests/ump_logger/recorder_test.c | 152 | 152 |
| tests/ump_logger/run_init_test.py | 30 | 30 |
| tests/ump_logger/run_test.py | 34 | 34 |
| tests/ump_logger/stubs/ADC.h | 1 | 1 |
| tests/ump_logger/stubs/DAC.h | 1 | 1 |
| tests/ump_logger/stubs/DSP2833x_Device.h | 9 | 9 |
| tests/ump_logger/stubs/RS485.h | 0 | 0 |
| tests/ump_logger/stubs/filter_bat2.h | 0 | 0 |
| tests/ump_logger/stubs/measure.h | 2 | 2 |
| tests/ump_logger/stubs/message.h | 0 | 0 |
| tests/ump_logger/stubs/package.h | 11 | 11 |
| tests/ump_logger/stubs/peripher.h | 0 | 0 |
| tests/ump_logger/test_firmware_image.py | 51 | 51 |
| tests/ump_logger/ti_syntax.h | 2 | 2 |