create new proj
This commit is contained in:
parent
3c669a811a
commit
4bf3fcd9ce
@ -42,9 +42,6 @@ void MX_CAN_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
void Setup_CAN_addr(uint8_t mode);
|
||||
int CAN_send(uint16_t data[], int Addr, int Qua);
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
|
||||
@ -1,10 +0,0 @@
|
||||
#include "stdint.h"
|
||||
|
||||
typedef unsigned short WORD;
|
||||
typedef unsigned char byte;
|
||||
|
||||
|
||||
unsigned int get_crc_ccitt(unsigned int crc, unsigned int *buf, unsigned long size );
|
||||
unsigned int get_crc_16(unsigned int crc,unsigned int *buf,unsigned long size );
|
||||
unsigned int get_crc_16b(unsigned int crc,unsigned int *buf,unsigned long size );
|
||||
int get_crc16(uint16_t *buf, int size );
|
||||
@ -1,20 +0,0 @@
|
||||
#ifndef __EEPROM_H
|
||||
#define __EEPROM_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "stm32f1xx_hal.h"
|
||||
|
||||
#define FLASH_EEPROM_BASE 0x0801F800
|
||||
#define FLASH_STARTO 0xBABEFACE
|
||||
|
||||
void putIntoEeprom(uint16_t, uint16_t*);
|
||||
uint16_t watInTheFlash(uint32_t);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __EEPROM_H */
|
||||
116
Core/Inc/gpio.h
116
Core/Inc/gpio.h
@ -33,122 +33,6 @@ extern "C" {
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
#define IN_01_Pin GPIO_PIN_3
|
||||
#define IN_01_GPIO_Port GPIOA
|
||||
#define IN_02_Pin GPIO_PIN_2
|
||||
#define IN_02_GPIO_Port GPIOA
|
||||
#define IN_03_Pin GPIO_PIN_1
|
||||
#define IN_03_GPIO_Port GPIOA
|
||||
#define IN_04_Pin GPIO_PIN_0
|
||||
#define IN_04_GPIO_Port GPIOA
|
||||
#define IN_05_Pin GPIO_PIN_15
|
||||
#define IN_05_GPIO_Port GPIOC
|
||||
#define IN_06_Pin GPIO_PIN_13
|
||||
#define IN_06_GPIO_Port GPIOC
|
||||
#define IN_07_Pin GPIO_PIN_15
|
||||
#define IN_07_GPIO_Port GPIOB
|
||||
#define IN_08_Pin GPIO_PIN_14
|
||||
#define IN_08_GPIO_Port GPIOB
|
||||
#define IN_09_Pin GPIO_PIN_13
|
||||
#define IN_09_GPIO_Port GPIOB
|
||||
#define IN_10_Pin GPIO_PIN_12
|
||||
#define IN_10_GPIO_Port GPIOB
|
||||
#define IN_11_Pin GPIO_PIN_1
|
||||
#define IN_11_GPIO_Port GPIOB
|
||||
#define IN_12_Pin GPIO_PIN_0
|
||||
#define IN_12_GPIO_Port GPIOB
|
||||
#define IN_13_Pin GPIO_PIN_5
|
||||
#define IN_13_GPIO_Port GPIOA
|
||||
#define IN_14_Pin GPIO_PIN_4
|
||||
#define IN_14_GPIO_Port GPIOA
|
||||
|
||||
#define J0_Pin GPIO_PIN_6
|
||||
#define J0_GPIO_Port GPIOA
|
||||
#define J1_Pin GPIO_PIN_7
|
||||
#define J1_GPIO_Port GPIOA
|
||||
#define J2_Pin GPIO_PIN_4
|
||||
#define J2_GPIO_Port GPIOC
|
||||
#define J3_Pin GPIO_PIN_5
|
||||
#define J3_GPIO_Port GPIOC
|
||||
#define Jselect_Pin GPIO_PIN_14
|
||||
#define Jselect_GPIO_Port GPIOC
|
||||
|
||||
#define LED0_Pin GPIO_PIN_5
|
||||
#define LED0_GPIO_Port GPIOB
|
||||
#define LED1_Pin GPIO_PIN_6
|
||||
#define LED1_GPIO_Port GPIOB
|
||||
#define LED2_Pin GPIO_PIN_2
|
||||
#define LED2_GPIO_Port GPIOC
|
||||
#define LED3_Pin GPIO_PIN_3
|
||||
#define LED3_GPIO_Port GPIOC
|
||||
|
||||
#define PVT4_Pin GPIO_PIN_6
|
||||
#define PVT4_GPIO_Port GPIOC
|
||||
#define PVT3_Pin GPIO_PIN_7
|
||||
#define PVT3_GPIO_Port GPIOC
|
||||
#define PVT2_Pin GPIO_PIN_8
|
||||
#define PVT2_GPIO_Port GPIOC
|
||||
#define PVT1_Pin GPIO_PIN_9
|
||||
#define PVT1_GPIO_Port GPIOC
|
||||
|
||||
#define BOOT1_Pin GPIO_PIN_2
|
||||
#define BOOT1_GPIO_Port GPIOB
|
||||
|
||||
#define LED_0_OFF HAL_GPIO_WritePin(LED0_GPIO_Port, LED0_Pin, GPIO_PIN_SET) //Set or clear the selected data port bit
|
||||
#define LED_0_ON HAL_GPIO_WritePin(LED0_GPIO_Port, LED0_Pin, GPIO_PIN_RESET) //??? ?????? ?? ??????????
|
||||
#define LED_0_TGL HAL_GPIO_TogglePin(LED0_GPIO_Port, LED0_Pin)
|
||||
|
||||
#define LED_1_OFF HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_SET) //Set or clear the selected data port bit
|
||||
#define LED_1_ON HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_RESET) //??? ?????? ?? ??????????
|
||||
#define LED_1_TGL HAL_GPIO_TogglePin(LED1_GPIO_Port, LED1_Pin)
|
||||
|
||||
#define LED_2_ON HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_SET) //Set or clear the selected data port bit
|
||||
#define LED_2_OFF HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_RESET) //??? ?????? ?? ??????????
|
||||
#define LED_2_TGL HAL_GPIO_TogglePin(LED2_GPIO_Port, LED2_Pin)
|
||||
|
||||
#define LED_3_ON HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_SET) //Set or clear the selected data port bit
|
||||
#define LED_3_OFF HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_RESET) //??? ?????? ?? ??????????
|
||||
#define LED_3_TGL HAL_GPIO_TogglePin(LED3_GPIO_Port, LED3_Pin)
|
||||
|
||||
#define Pvt1_ON HAL_GPIO_WritePin(PVT1_GPIO_Port, PVT1_Pin, GPIO_PIN_SET) //Set or clear the selected data port bit
|
||||
#define Pvt1_OFF HAL_GPIO_WritePin(PVT1_GPIO_Port, PVT1_Pin, GPIO_PIN_RESET) //??? ?????? ?? ??????????
|
||||
#define Pvt1_TGL HAL_GPIO_TogglePin(PVT1_GPIO_Port, PVT1_Pin)
|
||||
|
||||
#define Pvt2_ON HAL_GPIO_WritePin(PVT2_GPIO_Port, PVT2_Pin, GPIO_PIN_SET) //set - ????????????? ???, reset - ??????? ???
|
||||
#define Pvt2_OFF HAL_GPIO_WritePin(PVT2_GPIO_Port, PVT2_Pin, GPIO_PIN_RESET) //????? ??????? ? main.h ??????? ?????? ?????????????
|
||||
#define Pvt2_TGL HAL_GPIO_TogglePin(PVT2_GPIO_Port, PVT2_Pin)
|
||||
|
||||
#define Pvt3_ON HAL_GPIO_WritePin(PVT3_GPIO_Port, PVT3_Pin, GPIO_PIN_SET)
|
||||
#define Pvt3_OFF HAL_GPIO_WritePin(PVT3_GPIO_Port, PVT3_Pin, GPIO_PIN_RESET)
|
||||
#define Pvt3_TGL HAL_GPIO_TogglePin(PVT3_GPIO_Port, PVT3_Pin)
|
||||
|
||||
#define Pvt4_ON HAL_GPIO_WritePin(PVT4_GPIO_Port, PVT4_Pin, GPIO_PIN_SET)
|
||||
#define Pvt4_OFF HAL_GPIO_WritePin(PVT4_GPIO_Port, PVT4_Pin, GPIO_PIN_RESET)
|
||||
#define Pvt4_TGL HAL_GPIO_TogglePin(PVT4_GPIO_Port, PVT4_Pin)
|
||||
|
||||
#define IN_01 HAL_GPIO_ReadPin(IN_01_GPIO_Port, IN_01_Pin) // ???????? ??1 (??????? ???????????? ???????????)
|
||||
#define IN_02 HAL_GPIO_ReadPin(IN_02_GPIO_Port, IN_02_Pin) // ???????? ??2 (??????? ???????????? ?????????)
|
||||
#define IN_03 HAL_GPIO_ReadPin(IN_03_GPIO_Port, IN_03_Pin) // ???????? ??3 (??????? ??. ??????, ???? ?????????, ????)
|
||||
#define IN_04 HAL_GPIO_ReadPin(IN_04_GPIO_Port, IN_04_Pin) // ???????? ??4 (??????? ???????? ???? ? ?????????? +)
|
||||
#define IN_05 HAL_GPIO_ReadPin(IN_05_GPIO_Port, IN_05_Pin) // ???????? ??5 (??????? ???????? ???? ? ?????????? –)
|
||||
#define IN_06 HAL_GPIO_ReadPin(IN_06_GPIO_Port, IN_06_Pin) // ???????? ??6 (??????? ?????????)
|
||||
#define IN_07 HAL_GPIO_ReadPin(IN_07_GPIO_Port, IN_07_Pin) // ???????? 3? ??????? 380 ?
|
||||
|
||||
#define IN_08 HAL_GPIO_ReadPin(IN_08_GPIO_Port, IN_08_Pin) // ????? ??????????
|
||||
#define IN_09 HAL_GPIO_ReadPin(IN_09_GPIO_Port, IN_09_Pin) // ?????? ??????????
|
||||
#define IN_10 HAL_GPIO_ReadPin(IN_10_GPIO_Port, IN_10_Pin) // ?????? ? ???? 24 ?
|
||||
|
||||
#define IN_11 HAL_GPIO_ReadPin(IN_11_GPIO_Port, IN_11_Pin) // ???????? ??????? ???
|
||||
#define IN_12 HAL_GPIO_ReadPin(IN_12_GPIO_Port, IN_12_Pin) // ??????
|
||||
#define IN_13 HAL_GPIO_ReadPin(IN_13_GPIO_Port, IN_13_Pin) // ??????
|
||||
#define IN_14 HAL_GPIO_ReadPin(IN_14_GPIO_Port, IN_14_Pin) // ???????? ??????? ???
|
||||
|
||||
#define J0 HAL_GPIO_ReadPin(J0_GPIO_Port, J0_Pin) //Read the specified input port pin
|
||||
#define J1 HAL_GPIO_ReadPin(J1_GPIO_Port, J1_Pin)
|
||||
#define J2 HAL_GPIO_ReadPin(J2_GPIO_Port, J2_Pin)
|
||||
#define J3 HAL_GPIO_ReadPin(J3_GPIO_Port, J3_Pin)
|
||||
|
||||
#define Jselect HAL_GPIO_ReadPin(Jselect_GPIO_Port, Jselect_Pin)
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
|
||||
@ -1,30 +0,0 @@
|
||||
#ifndef __LAMPA_H
|
||||
#define __LAMPA_H
|
||||
|
||||
/*
|
||||
* Применяется метод Слой аппаратных абстракции(HAL) так он последний(модный),
|
||||
* тут описано библиотечные вызовы
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "main.h"
|
||||
#include "stdbool.h"
|
||||
|
||||
|
||||
#define Delay 1000
|
||||
#define numUno 1
|
||||
#define numNul 0
|
||||
|
||||
void ReadEnteres(void);
|
||||
uint16_t ReadJumpers(void);
|
||||
uint16_t TestJumper(void);
|
||||
void ReadSeanus(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -7,13 +7,12 @@
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2022 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
@ -32,7 +31,7 @@ extern "C" {
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
@ -42,18 +41,6 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t force_pause:1;
|
||||
uint32_t pause;
|
||||
|
||||
|
||||
|
||||
// uint8_t
|
||||
// uint16_t
|
||||
|
||||
}FLAG;
|
||||
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
@ -67,8 +54,6 @@ void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
void Millisecond(void);
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
@ -78,9 +63,9 @@ void Millisecond(void);
|
||||
#define SELEKT_PCH_GPIO_Port GPIOC
|
||||
#define IN_05_Pin GPIO_PIN_15
|
||||
#define IN_05_GPIO_Port GPIOC
|
||||
//#define LED1_Pin GPIO_PIN_2
|
||||
//#define LED1_GPIO_Port GPIOC
|
||||
//#define LED2_Pin GPIO_PIN_3
|
||||
#define LED1_Pin GPIO_PIN_2
|
||||
#define LED1_GPIO_Port GPIOC
|
||||
#define LED2_Pin GPIO_PIN_3
|
||||
#define LED2_GPIO_Port GPIOC
|
||||
#define IN_04_Pin GPIO_PIN_0
|
||||
#define IN_04_GPIO_Port GPIOA
|
||||
@ -94,19 +79,19 @@ void Millisecond(void);
|
||||
#define IN_14_GPIO_Port GPIOA
|
||||
#define IN_13_Pin GPIO_PIN_5
|
||||
#define IN_13_GPIO_Port GPIOA
|
||||
//#define J0_Pin GPIO_PIN_7
|
||||
#define J0_Pin GPIO_PIN_7
|
||||
#define J0_GPIO_Port GPIOA
|
||||
//#define J1_Pin GPIO_PIN_4
|
||||
//#define J1_GPIO_Port GPIOC
|
||||
//#define J2_Pin GPIO_PIN_5
|
||||
#define J1_Pin GPIO_PIN_4
|
||||
#define J1_GPIO_Port GPIOC
|
||||
#define J2_Pin GPIO_PIN_5
|
||||
#define J2_GPIO_Port GPIOC
|
||||
//#define J3_Pin GPIO_PIN_0
|
||||
//#define J3_GPIO_Port GPIOB
|
||||
//#define IN_12_Pin GPIO_PIN_1
|
||||
#define J3_Pin GPIO_PIN_0
|
||||
#define J3_GPIO_Port GPIOB
|
||||
#define IN_12_Pin GPIO_PIN_1
|
||||
#define IN_12_GPIO_Port GPIOB
|
||||
#define BOOT1_Pin GPIO_PIN_2
|
||||
#define BOOT1_GPIO_Port GPIOB
|
||||
//#define IN_11_Pin GPIO_PIN_10
|
||||
#define IN_11_Pin GPIO_PIN_10
|
||||
#define IN_11_GPIO_Port GPIOB
|
||||
#define IN_10_Pin GPIO_PIN_12
|
||||
#define IN_10_GPIO_Port GPIOB
|
||||
|
||||
@ -1,25 +0,0 @@
|
||||
#ifndef MESSAGE_H
|
||||
#define MESSAGE_H
|
||||
|
||||
#include "stdint.h"
|
||||
#include "struc.h"
|
||||
|
||||
typedef unsigned char CHAR;
|
||||
|
||||
#define Modbus_LEN 0x000080
|
||||
#define Modbus ((WORDE *)modbus)
|
||||
#define Params ((WORDE *)params)
|
||||
|
||||
extern uint16_t Mode;
|
||||
|
||||
extern uint16_t modbus[],params[],archiv[],county[],espero[];
|
||||
|
||||
extern LONGE* outputs;
|
||||
|
||||
extern uint16_t Maska[][8];
|
||||
|
||||
void Save_params(void);
|
||||
void Load_params(void);
|
||||
void Default_params(void);
|
||||
|
||||
#endif //MESSAGE_H
|
||||
@ -1,77 +0,0 @@
|
||||
#ifndef PACKAGE
|
||||
#define PACKAGE
|
||||
|
||||
#define PROTOKOL 3
|
||||
|
||||
#define m_FAST 0
|
||||
#define m_SLOW 1
|
||||
|
||||
|
||||
|
||||
#define keys 0x0 // адрес повтораемой посылки «keys»
|
||||
|
||||
#define Inputs Modbus[0x0]
|
||||
#define Alarms Modbus[0x1]
|
||||
#define Errors Modbus[0x2]
|
||||
|
||||
#define Alarm_mask Modbus[0x8]
|
||||
#define Error_mask Modbus[0x9]
|
||||
|
||||
#define Jumpers Modbus[0x10]
|
||||
#define Buttons Modbus[0x11]
|
||||
#define jumpers modbus[0x10]
|
||||
#define buttons modbus[0x11]
|
||||
|
||||
#define Squazh_U (modbus+0x18)
|
||||
|
||||
#define Sleep_time modbus[0x48]
|
||||
|
||||
#define Squazh_L (modbus+0x30)
|
||||
|
||||
#define Cancount (modbus+0x60) // пауза между посылками CAN
|
||||
#define CanWait (modbus+0x62) // пауза после прохождениа цикла
|
||||
#define CanRestart (modbus+0x64) // перезапуск посылки
|
||||
#define CanRptVez modbus[0x66] // кол-во повторений посылки «keys»
|
||||
#define CanRptLen modbus[0x67] // длина повтораемой посылки «keys»
|
||||
|
||||
#define Brightness modbus[0x68] // аркость сигнальной лампочки
|
||||
#define Lightness modbus[0x6A] // управление сигнальной лампочки
|
||||
|
||||
#define cancyclo 0x78 // его адрес
|
||||
#define CanCycle (modbus+0x78) // счетчик циклов CAN
|
||||
#define CanRound (modbus+0x7A) // счетчик еще более полных циклов CAN
|
||||
|
||||
#define Protokol modbus[125]
|
||||
#define LastMode modbus[126]
|
||||
#define Commands modbus[127]
|
||||
|
||||
#define command params[128]
|
||||
#define bit_command Params[128]
|
||||
|
||||
#define cTestLamp bit_command.bit.bit0
|
||||
#define cDefParam bit_command.bit.bit1
|
||||
#define cSaveParam bit_command.bit.bit2
|
||||
#define cLoadParam bit_command.bit.bit3
|
||||
#define cTermoCal bit_command.bit.bit4
|
||||
#define cKoefCalc bit_command.bit.bit5
|
||||
#define cSecretBt bit_command.bit.bit6
|
||||
#define cCanReset bit_command.bit.bit7
|
||||
#define cRawMeat bit_command.bit.bit8
|
||||
#define cCanReset bit_command.bit.bit7
|
||||
#define cReset bit_command.bit.bitF
|
||||
|
||||
/*
|
||||
#define cTestLamp Modbus[127].bit.bit0
|
||||
#define cDefParam Modbus[127].bit.bit1
|
||||
#define cSaveParam Modbus[127].bit.bit2
|
||||
#define cLoadParam Modbus[127].bit.bit3
|
||||
#define cTermoCal Modbus[127].bit.bit4
|
||||
#define cKoefCalc Modbus[127].bit.bit5
|
||||
#define cSecretBt Modbus[127].bit.bit6
|
||||
#define cCanReset Modbus[127].bit.bit7
|
||||
#define cRawMeat Modbus[127].bit.bit8
|
||||
#define cCanReset Modbus[127].bit.bit7
|
||||
#define cReset Modbus[127].bit.bitF
|
||||
*/
|
||||
#endif //PACKAGE
|
||||
|
||||
@ -1,391 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_HAL_CONF_H
|
||||
#define __STM32F1xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
/*#define HAL_ADC_MODULE_ENABLED */
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
#define HAL_CAN_MODULE_ENABLED
|
||||
/*#define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/*#define HAL_CEC_MODULE_ENABLED */
|
||||
/*#define HAL_CORTEX_MODULE_ENABLED */
|
||||
/*#define HAL_CRC_MODULE_ENABLED */
|
||||
/*#define HAL_DAC_MODULE_ENABLED */
|
||||
/*#define HAL_DMA_MODULE_ENABLED */
|
||||
/*#define HAL_ETH_MODULE_ENABLED */
|
||||
/*#define HAL_FLASH_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/*#define HAL_I2C_MODULE_ENABLED */
|
||||
/*#define HAL_I2S_MODULE_ENABLED */
|
||||
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||
#define HAL_IWDG_MODULE_ENABLED
|
||||
/*#define HAL_NOR_MODULE_ENABLED */
|
||||
/*#define HAL_NAND_MODULE_ENABLED */
|
||||
/*#define HAL_PCCARD_MODULE_ENABLED */
|
||||
/*#define HAL_PCD_MODULE_ENABLED */
|
||||
/*#define HAL_HCD_MODULE_ENABLED */
|
||||
/*#define HAL_PWR_MODULE_ENABLED */
|
||||
/*#define HAL_RCC_MODULE_ENABLED */
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
/*#define HAL_SD_MODULE_ENABLED */
|
||||
/*#define HAL_MMC_MODULE_ENABLED */
|
||||
/*#define HAL_SDRAM_MODULE_ENABLED */
|
||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/*#define HAL_SPI_MODULE_ENABLED */
|
||||
/*#define HAL_SRAM_MODULE_ENABLED */
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
/*#define HAL_UART_MODULE_ENABLED */
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority (lowest by default) */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 8U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32f1xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_HAL_CONF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@ -6,15 +6,14 @@
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2022 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
|
||||
153
Core/Inc/struc.h
153
Core/Inc/struc.h
@ -1,153 +0,0 @@
|
||||
#ifndef __STRUC_H
|
||||
#define __STRUC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
unsigned char bit0: 1;
|
||||
unsigned char bit1: 1;
|
||||
unsigned char bit2: 1;
|
||||
unsigned char bit3: 1;
|
||||
unsigned char bit4: 1;
|
||||
unsigned char bit5: 1;
|
||||
unsigned char bit6: 1;
|
||||
unsigned char bit7: 1;
|
||||
|
||||
} bit;
|
||||
|
||||
struct
|
||||
{
|
||||
unsigned char quad_0 :4;
|
||||
unsigned char quad_1 :4;
|
||||
|
||||
} qua;
|
||||
|
||||
unsigned char all;
|
||||
|
||||
} BAITE;
|
||||
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
unsigned short int bit0: 1;
|
||||
unsigned short int bit1: 1;
|
||||
unsigned short int bit2: 1;
|
||||
unsigned short int bit3: 1;
|
||||
unsigned short int bit4: 1;
|
||||
unsigned short int bit5: 1;
|
||||
unsigned short int bit6: 1;
|
||||
unsigned short int bit7: 1;
|
||||
unsigned short int bit8: 1;
|
||||
unsigned short int bit9: 1;
|
||||
unsigned short int bitA: 1;
|
||||
unsigned short int bitB: 1;
|
||||
unsigned short int bitC: 1;
|
||||
unsigned short int bitD: 1;
|
||||
unsigned short int bitE: 1;
|
||||
unsigned short int bitF: 1;
|
||||
|
||||
} bit;
|
||||
|
||||
struct
|
||||
{
|
||||
unsigned short int quad_0 :4;
|
||||
unsigned short int quad_1 :4;
|
||||
unsigned short int quad_2 :4;
|
||||
unsigned short int quad_3 :4;
|
||||
|
||||
} qua;
|
||||
|
||||
struct
|
||||
{
|
||||
unsigned short int byte_0 :8;
|
||||
unsigned short int byte_1 :8;
|
||||
|
||||
} byt;
|
||||
|
||||
unsigned short int all;
|
||||
|
||||
} WORDE;
|
||||
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
unsigned int bit00: 1;
|
||||
unsigned int bit01: 1;
|
||||
unsigned int bit02: 1;
|
||||
unsigned int bit03: 1;
|
||||
unsigned int bit04: 1;
|
||||
unsigned int bit05: 1;
|
||||
unsigned int bit06: 1;
|
||||
unsigned int bit07: 1;
|
||||
unsigned int bit08: 1;
|
||||
unsigned int bit09: 1;
|
||||
unsigned int bit0A: 1;
|
||||
unsigned int bit0B: 1;
|
||||
unsigned int bit0C: 1;
|
||||
unsigned int bit0D: 1;
|
||||
unsigned int bit0E: 1;
|
||||
unsigned int bit0F: 1;
|
||||
unsigned int bit10: 1;
|
||||
unsigned int bit11: 1;
|
||||
unsigned int bit12: 1;
|
||||
unsigned int bit13: 1;
|
||||
unsigned int bit14: 1;
|
||||
unsigned int bit15: 1;
|
||||
unsigned int bit16: 1;
|
||||
unsigned int bit17: 1;
|
||||
unsigned int bit18: 1;
|
||||
unsigned int bit19: 1;
|
||||
unsigned int bit1A: 1;
|
||||
unsigned int bit1B: 1;
|
||||
unsigned int bit1C: 1;
|
||||
unsigned int bit1D: 1;
|
||||
unsigned int bit1E: 1;
|
||||
unsigned int bit1F: 1;
|
||||
|
||||
} bit;
|
||||
|
||||
struct
|
||||
{
|
||||
unsigned int quad_0 :4;
|
||||
unsigned int quad_1 :4;
|
||||
unsigned int quad_2 :4;
|
||||
unsigned int quad_3 :4;
|
||||
unsigned int quad_4 :4;
|
||||
unsigned int quad_5 :4;
|
||||
unsigned int quad_6 :4;
|
||||
unsigned int quad_7 :4;
|
||||
|
||||
} qua;
|
||||
|
||||
struct
|
||||
{
|
||||
unsigned int byte_0 :8;
|
||||
unsigned int byte_1 :8;
|
||||
unsigned int byte_2 :8;
|
||||
unsigned int byte_3 :8;
|
||||
|
||||
} byt;
|
||||
|
||||
struct
|
||||
{
|
||||
unsigned int word_0 :16;
|
||||
unsigned int word_1 :16;
|
||||
|
||||
} wrd;
|
||||
|
||||
unsigned int all;
|
||||
|
||||
} LONGE;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
147
Core/Src/can.c
147
Core/Src/can.c
@ -22,29 +22,6 @@
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
#include "gpio.h"
|
||||
#include "message.h"
|
||||
|
||||
void CAN_filterConfig(void);
|
||||
|
||||
CAN_TxHeaderTypeDef TxHeader;
|
||||
CAN_RxHeaderTypeDef RxHeader;
|
||||
|
||||
CAN_FilterTypeDef sFilterConfig;
|
||||
|
||||
CAN_TxHeaderTypeDef msgHeaderSend;
|
||||
uint8_t msgDataSend[8];
|
||||
uint32_t mailBoxNum = 0;
|
||||
|
||||
uint8_t TxData[8];
|
||||
uint8_t RxData[8];
|
||||
uint32_t TxMailbox;
|
||||
|
||||
uint32_t TX_box_ID = 0;
|
||||
uint32_t RX_box_ID = 0;
|
||||
uint32_t BC_box_ID = 0;
|
||||
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
CAN_HandleTypeDef hcan;
|
||||
@ -61,7 +38,7 @@ void MX_CAN_Init(void)
|
||||
|
||||
/* USER CODE END CAN_Init 1 */
|
||||
hcan.Instance = CAN1;
|
||||
hcan.Init.Prescaler = 10;
|
||||
hcan.Init.Prescaler = 16;
|
||||
hcan.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan.Init.TimeSeg1 = CAN_BS1_13TQ;
|
||||
@ -77,31 +54,6 @@ void MX_CAN_Init(void)
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN_Init 2 */
|
||||
|
||||
CAN_filterConfig();
|
||||
|
||||
msgHeaderSend.StdId = 0x200;
|
||||
msgHeaderSend.ExtId = TX_box_ID;
|
||||
msgHeaderSend.DLC = 8;
|
||||
msgHeaderSend.TransmitGlobalTime = DISABLE;
|
||||
msgHeaderSend.RTR = CAN_RTR_DATA;
|
||||
msgHeaderSend.IDE = CAN_ID_EXT;
|
||||
|
||||
// CAN start
|
||||
if (HAL_CAN_Start(&hcan) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
// CAN notifications (interrupts)
|
||||
if (HAL_CAN_ActivateNotification(&hcan, CAN_IT_RX_FIFO0_MSG_PENDING | CAN_IT_TX_MAILBOX_EMPTY) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/* USER CODE END CAN_Init 2 */
|
||||
|
||||
@ -173,101 +125,4 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* canHandle)
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
void Setup_CAN_addr(uint8_t mode)
|
||||
{
|
||||
BC_box_ID = 0x9F<<20;
|
||||
RX_box_ID = (0x80+mode)<<20;
|
||||
TX_box_ID = RX_box_ID | (1L<<28);
|
||||
}
|
||||
|
||||
void CAN_filterConfig(void)
|
||||
{
|
||||
|
||||
sFilterConfig.FilterBank = 0;
|
||||
sFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK;
|
||||
sFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT;
|
||||
sFilterConfig.FilterIdHigh = 0x0000;
|
||||
sFilterConfig.FilterIdLow = 0x0000;
|
||||
sFilterConfig.FilterMaskIdHigh = 0x0000;
|
||||
sFilterConfig.FilterMaskIdLow = 0x0000;
|
||||
sFilterConfig.FilterFIFOAssignment = CAN_RX_FIFO0;
|
||||
sFilterConfig.FilterActivation = ENABLE;
|
||||
sFilterConfig.SlaveStartFilterBank = 14;
|
||||
|
||||
if (HAL_CAN_ConfigFilter(&hcan, &sFilterConfig) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
} }
|
||||
|
||||
void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan)
|
||||
{
|
||||
// HAL_GPIO_TogglePin(LED_2_GPIO_Port, LED_2_Pin);
|
||||
}
|
||||
|
||||
|
||||
void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan_i)
|
||||
{
|
||||
CAN_RxHeaderTypeDef msgHeader;
|
||||
uint8_t msgData[8];
|
||||
|
||||
unsigned int adr,qua;
|
||||
unsigned short Data[4];
|
||||
|
||||
if (HAL_CAN_GetRxMessage(hcan_i, CAN_RX_FIFO0, &msgHeader, msgData) != HAL_OK)
|
||||
{
|
||||
/* Reception Error */
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
if((msgHeader.ExtId & 0xFF00000) != RX_box_ID)
|
||||
if((msgHeader.ExtId & 0xFF00000) != BC_box_ID) return;
|
||||
|
||||
adr = msgHeader.ExtId & 0xFFFF;
|
||||
qua = msgHeader.DLC/2;
|
||||
|
||||
Data[0] = msgData[0]; Data[0] = (Data[0]<<8) | msgData[1];
|
||||
Data[1] = msgData[2]; Data[1] = (Data[1]<<8) | msgData[3];
|
||||
Data[2] = msgData[4]; Data[2] = (Data[2]<<8) | msgData[5];
|
||||
Data[3] = msgData[6]; Data[3] = (Data[3]<<8) | msgData[7];
|
||||
|
||||
if(qua ) if(adr < Modbus_LEN) modbus[adr] = Data[0]; adr++;
|
||||
if(qua>1) if(adr < Modbus_LEN) modbus[adr] = Data[1]; adr++;
|
||||
if(qua>2) if(adr < Modbus_LEN) modbus[adr] = Data[2]; adr++;
|
||||
if(qua>3) if(adr < Modbus_LEN) modbus[adr] = Data[3];
|
||||
|
||||
LED_1_TGL;
|
||||
}
|
||||
|
||||
int CAN_send(uint16_t data[], int Addr, int Qua)
|
||||
{
|
||||
int wait = 1000;
|
||||
|
||||
while(wait-- && (HAL_CAN_GetTxMailboxesFreeLevel(&hcan) == 0));
|
||||
|
||||
if (HAL_CAN_GetTxMailboxesFreeLevel(&hcan) != 0)
|
||||
{
|
||||
msgHeaderSend.ExtId = TX_box_ID | (Addr & 0xFFFF);
|
||||
msgHeaderSend.DLC = Qua*2;
|
||||
|
||||
msgDataSend[0] = (data[Addr ]>>8) & 0x00ff;
|
||||
msgDataSend[1] = (data[Addr ] ) & 0x00ff;
|
||||
msgDataSend[2] = (data[Addr+1]>>8) & 0x00ff;
|
||||
msgDataSend[3] = (data[Addr+1] ) & 0x00ff;
|
||||
msgDataSend[4] = (data[Addr+2]>>8) & 0x00ff;
|
||||
msgDataSend[5] = (data[Addr+2] ) & 0x00ff;
|
||||
msgDataSend[6] = (data[Addr+3]>>8) & 0x00ff;
|
||||
msgDataSend[7] = (data[Addr+3] ) & 0x00ff;
|
||||
|
||||
HAL_CAN_AddTxMessage(&hcan, &msgHeaderSend, msgDataSend, &mailBoxNum);
|
||||
|
||||
LED_0_TGL;
|
||||
return 1;
|
||||
}
|
||||
else
|
||||
{
|
||||
HAL_CAN_Stop(&hcan);
|
||||
HAL_CAN_Start(&hcan);
|
||||
return 0;
|
||||
} }
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
196
Core/Src/crc16.c
196
Core/Src/crc16.c
@ -1,196 +0,0 @@
|
||||
#include "crc16.h"
|
||||
#define MAKE_TABS 0 /* Builds tables below */
|
||||
#define FAST_CRC 1 /* If fast CRC should be used */
|
||||
#define ONLY_CRC16 1
|
||||
|
||||
#define Poln 0xA001
|
||||
|
||||
|
||||
#if FAST_CRC & !MAKE_TABS
|
||||
|
||||
#if !ONLY_CRC16
|
||||
|
||||
static WORD crc_ccitt_tab[] = {
|
||||
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
|
||||
0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
|
||||
0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
|
||||
0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
|
||||
0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
|
||||
0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
|
||||
0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
|
||||
0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
|
||||
0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
|
||||
0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
|
||||
0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
|
||||
0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
|
||||
0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
|
||||
0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
|
||||
0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
|
||||
0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
|
||||
0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
|
||||
0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
|
||||
0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
|
||||
0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
|
||||
0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
|
||||
0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
|
||||
0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
|
||||
0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
|
||||
0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
|
||||
0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
|
||||
0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
|
||||
0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
|
||||
0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
|
||||
0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
|
||||
0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
|
||||
0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
|
||||
};
|
||||
#endif
|
||||
|
||||
WORD crc_16_tab[] = {
|
||||
0x0000, 0xc0c1, 0xc181, 0x0140, 0xc301, 0x03c0, 0x0280, 0xc241,
|
||||
0xc601, 0x06c0, 0x0780, 0xc741, 0x0500, 0xc5c1, 0xc481, 0x0440,
|
||||
0xcc01, 0x0cc0, 0x0d80, 0xcd41, 0x0f00, 0xcfc1, 0xce81, 0x0e40,
|
||||
0x0a00, 0xcac1, 0xcb81, 0x0b40, 0xc901, 0x09c0, 0x0880, 0xc841,
|
||||
0xd801, 0x18c0, 0x1980, 0xd941, 0x1b00, 0xdbc1, 0xda81, 0x1a40,
|
||||
0x1e00, 0xdec1, 0xdf81, 0x1f40, 0xdd01, 0x1dc0, 0x1c80, 0xdc41,
|
||||
0x1400, 0xd4c1, 0xd581, 0x1540, 0xd701, 0x17c0, 0x1680, 0xd641,
|
||||
0xd201, 0x12c0, 0x1380, 0xd341, 0x1100, 0xd1c1, 0xd081, 0x1040,
|
||||
0xf001, 0x30c0, 0x3180, 0xf141, 0x3300, 0xf3c1, 0xf281, 0x3240,
|
||||
0x3600, 0xf6c1, 0xf781, 0x3740, 0xf501, 0x35c0, 0x3480, 0xf441,
|
||||
0x3c00, 0xfcc1, 0xfd81, 0x3d40, 0xff01, 0x3fc0, 0x3e80, 0xfe41,
|
||||
0xfa01, 0x3ac0, 0x3b80, 0xfb41, 0x3900, 0xf9c1, 0xf881, 0x3840,
|
||||
0x2800, 0xe8c1, 0xe981, 0x2940, 0xeb01, 0x2bc0, 0x2a80, 0xea41,
|
||||
0xee01, 0x2ec0, 0x2f80, 0xef41, 0x2d00, 0xedc1, 0xec81, 0x2c40,
|
||||
0xe401, 0x24c0, 0x2580, 0xe541, 0x2700, 0xe7c1, 0xe681, 0x2640,
|
||||
0x2200, 0xe2c1, 0xe381, 0x2340, 0xe101, 0x21c0, 0x2080, 0xe041,
|
||||
0xa001, 0x60c0, 0x6180, 0xa141, 0x6300, 0xa3c1, 0xa281, 0x6240,
|
||||
0x6600, 0xa6c1, 0xa781, 0x6740, 0xa501, 0x65c0, 0x6480, 0xa441,
|
||||
0x6c00, 0xacc1, 0xad81, 0x6d40, 0xaf01, 0x6fc0, 0x6e80, 0xae41,
|
||||
0xaa01, 0x6ac0, 0x6b80, 0xab41, 0x6900, 0xa9c1, 0xa881, 0x6840,
|
||||
0x7800, 0xb8c1, 0xb981, 0x7940, 0xbb01, 0x7bc0, 0x7a80, 0xba41,
|
||||
0xbe01, 0x7ec0, 0x7f80, 0xbf41, 0x7d00, 0xbdc1, 0xbc81, 0x7c40,
|
||||
0xb401, 0x74c0, 0x7580, 0xb541, 0x7700, 0xb7c1, 0xb681, 0x7640,
|
||||
0x7200, 0xb2c1, 0xb381, 0x7340, 0xb101, 0x71c0, 0x7080, 0xb041,
|
||||
0x5000, 0x90c1, 0x9181, 0x5140, 0x9301, 0x53c0, 0x5280, 0x9241,
|
||||
0x9601, 0x56c0, 0x5780, 0x9741, 0x5500, 0x95c1, 0x9481, 0x5440,
|
||||
0x9c01, 0x5cc0, 0x5d80, 0x9d41, 0x5f00, 0x9fc1, 0x9e81, 0x5e40,
|
||||
0x5a00, 0x9ac1, 0x9b81, 0x5b40, 0x9901, 0x59c0, 0x5880, 0x9841,
|
||||
0x8801, 0x48c0, 0x4980, 0x8941, 0x4b00, 0x8bc1, 0x8a81, 0x4a40,
|
||||
0x4e00, 0x8ec1, 0x8f81, 0x4f40, 0x8d01, 0x4dc0, 0x4c80, 0x8c41,
|
||||
0x4400, 0x84c1, 0x8581, 0x4540, 0x8701, 0x47c0, 0x4680, 0x8641,
|
||||
0x8201, 0x42c0, 0x4380, 0x8341, 0x4100, 0x81c1, 0x8081, 0x4040
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
#if !ONLY_CRC16
|
||||
|
||||
/* CRC-CCITT is based on the polynomial x^16 + x^12 + x^5 + 1. Bits */
|
||||
/* are sent MSB to LSB. */
|
||||
unsigned int get_crc_ccitt(unsigned int crc,unsigned int *buf,unsigned long size )
|
||||
{
|
||||
#if !(FAST_CRC & !MAKE_TABS)
|
||||
register int i;
|
||||
#endif
|
||||
|
||||
while (size--) {
|
||||
#if FAST_CRC & !MAKE_TABS
|
||||
crc = (crc << 8) ^ crc_ccitt_tab[ (crc >> 8) ^ *buf++ ];
|
||||
#else
|
||||
crc ^= (WORD)(*buf++) << 8;
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (crc & 0x8000)
|
||||
crc = (crc << 1) ^ 0x1021;
|
||||
else
|
||||
crc <<= 1;
|
||||
}
|
||||
#endif
|
||||
} return crc;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/* CRC-16 is based on the polynomial x^16 + x^15 + x^2 + 1. Bits are */
|
||||
/* sent LSB to MSB. */
|
||||
unsigned int get_crc_16(unsigned int crc,unsigned int *buf,unsigned long size )
|
||||
{
|
||||
#if !(FAST_CRC & !MAKE_TABS)
|
||||
register unsigned int i;
|
||||
register unsigned int ch;
|
||||
#endif
|
||||
|
||||
while (size--) {
|
||||
#if FAST_CRC & !MAKE_TABS
|
||||
|
||||
crc = (crc >> 8) ^ crc_16_tab[ (crc ^ *buf++) & 0xff ];
|
||||
crc = crc & 0xffff;
|
||||
#else
|
||||
ch = *buf++;
|
||||
for (i = 0; i < 8; i++) {
|
||||
if ((crc ^ ch) & 1)
|
||||
crc = (crc >> 1) ^ 0xa001;
|
||||
else
|
||||
crc >>= 1;
|
||||
ch >>= 1;
|
||||
}
|
||||
#endif
|
||||
} return (crc & 0xffff);
|
||||
}
|
||||
|
||||
|
||||
|
||||
unsigned int get_crc_16b(unsigned int crc,unsigned int *buf,unsigned long size )
|
||||
{
|
||||
|
||||
unsigned int x, dword, byte;
|
||||
unsigned long i;
|
||||
|
||||
|
||||
|
||||
for (i = 0; i < size; i++)
|
||||
{
|
||||
x = i % 2;
|
||||
|
||||
dword = buf[i/2];
|
||||
// dword = *buf;
|
||||
|
||||
|
||||
if (x == 0)
|
||||
{
|
||||
byte = ((dword >> 8)&0xFF);
|
||||
}
|
||||
|
||||
if (x == 1)
|
||||
{
|
||||
byte = (dword & 0xFF);
|
||||
}
|
||||
|
||||
crc = (crc >> 8) ^ crc_16_tab[ (crc ^ (byte) ) & 0xff ];
|
||||
crc = crc & 0xffff;
|
||||
|
||||
// crc = crc + ((byte) & 0xff);
|
||||
|
||||
}
|
||||
|
||||
return (crc & 0xffff);
|
||||
}
|
||||
|
||||
int get_crc16(uint16_t *buf, int size )
|
||||
{
|
||||
int crc16,i,j;
|
||||
|
||||
crc16=0xFFFF;
|
||||
for(i=0;i<size;i++)
|
||||
{
|
||||
crc16=crc16^(buf[i]&0xFF);
|
||||
for (j=0;j<8;j++)
|
||||
if(crc16&1) crc16=(crc16>>1)^Poln;
|
||||
else crc16=crc16>>1;
|
||||
|
||||
crc16=crc16^((buf[i]>>8)&0xFF);
|
||||
for (j=0;j<8;j++)
|
||||
if(crc16&1) crc16=(crc16>>1)^Poln;
|
||||
else crc16=crc16>>1;
|
||||
}
|
||||
return crc16;
|
||||
}
|
||||
@ -1,49 +0,0 @@
|
||||
#include "eeprom.h"
|
||||
|
||||
|
||||
void putIntoEeprom(uint16_t lenght, uint16_t* param)
|
||||
{
|
||||
uint32_t adr = FLASH_EEPROM_BASE;
|
||||
//uint32_t p = FLASH_STARTO;
|
||||
HAL_StatusTypeDef flash_ok = HAL_ERROR;
|
||||
|
||||
while(flash_ok != HAL_OK)
|
||||
{flash_ok = HAL_FLASH_Unlock();}
|
||||
|
||||
FLASH_EraseInitTypeDef erase;
|
||||
uint32_t pageError = 0x0;
|
||||
erase.TypeErase = FLASH_TYPEERASE_PAGES;
|
||||
erase.PageAddress = FLASH_EEPROM_BASE;
|
||||
erase.NbPages = 0x01;
|
||||
flash_ok = HAL_FLASHEx_Erase(&erase, &pageError);
|
||||
|
||||
flash_ok = HAL_ERROR;
|
||||
while(flash_ok != HAL_OK)
|
||||
{flash_ok = HAL_FLASH_Lock();}
|
||||
|
||||
|
||||
flash_ok = HAL_ERROR;
|
||||
while(flash_ok != HAL_OK)
|
||||
{flash_ok = HAL_FLASH_Unlock();}
|
||||
|
||||
flash_ok = HAL_ERROR;
|
||||
while(flash_ok != HAL_OK)
|
||||
{
|
||||
for(int i=0; i<(lenght); i++)
|
||||
{
|
||||
flash_ok = HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, adr, *param);
|
||||
param++;
|
||||
adr += 0x2;
|
||||
}
|
||||
}
|
||||
|
||||
flash_ok = HAL_ERROR;
|
||||
while(flash_ok != HAL_OK)
|
||||
{flash_ok = HAL_FLASH_Lock();}
|
||||
}
|
||||
|
||||
uint16_t watInTheFlash(uint32_t adress)
|
||||
{
|
||||
return (*(uint32_t*) adress);
|
||||
}
|
||||
|
||||
100
Core/Src/lampa.c
100
Core/Src/lampa.c
@ -1,100 +0,0 @@
|
||||
|
||||
#include "gpio.h"
|
||||
#include "lampa.h"
|
||||
#include "struc.h"
|
||||
#include "message.h"
|
||||
#include "package.h"
|
||||
|
||||
void ReadEnteres(void)
|
||||
{
|
||||
WORDE input, alarm, error;
|
||||
|
||||
input.bit.bit0 = !IN_06; // Контроль ИП1 (питание управляющего контроллера)
|
||||
input.bit.bit1 = !IN_05; // Контроль ИП2 (питание периферийных устройств)
|
||||
input.bit.bit2 = !IN_04; // Контроль ИП3 (питание эл. замков, ламп освещения, УКСИ)
|
||||
input.bit.bit3 = !IN_03; // Контроль ИП4 (питание датчиков тока и напряжения +)
|
||||
input.bit.bit4 = !IN_02; // Контроль ИП5 (питание датчиков тока и напряжения –)
|
||||
input.bit.bit5 = !IN_01; // Контроль ИП6 (питание драйверов)
|
||||
|
||||
input.bit.bit6 = !IN_07; // Контроль 3х фазного 380 В
|
||||
input.bit.bit7 = !IN_08; // Заряд накопителя
|
||||
input.bit.bit8 = !IN_09; // Разряд накопителя
|
||||
input.bit.bit9 = IN_10; // Авария в сети 24 В
|
||||
|
||||
input.bit.bitD = (Squazh_U[3] > Squazh_L[3]);
|
||||
input.bit.bitC = (Squazh_U[2] > Squazh_L[2]);
|
||||
input.bit.bitB = (Squazh_U[1] > Squazh_L[1]);
|
||||
input.bit.bitA = (Squazh_U[0] > Squazh_L[0]);
|
||||
/*
|
||||
input.bit.bitA = !IN_11; // Контроль питания ЛСУ
|
||||
input.bit.bitB = !IN_12; // Контроль питания СВО
|
||||
input.bit.bitC = !IN_13; // резерв
|
||||
input.bit.bitD = !IN_14; // Контроль питания СКК
|
||||
*/
|
||||
Inputs.all = input.all;
|
||||
|
||||
alarm.all = ~Inputs.all & Alarm_mask.all;
|
||||
alarm.bit.bit7 = 0; // Заряд накопителя
|
||||
alarm.bit.bit8 = Inputs.bit.bit8; // Разряд накопителя
|
||||
alarm.bit.bit9 = Inputs.bit.bit9; // Авария в сети 24 В
|
||||
Alarms = alarm;
|
||||
|
||||
error.all = ~Inputs.all & Error_mask.all;
|
||||
error.bit.bit9 = Inputs.bit.bit9; // Авария в сети 24 В
|
||||
Errors = error;
|
||||
}
|
||||
|
||||
uint16_t ReadJumpers(void)
|
||||
{
|
||||
WORDE input;
|
||||
|
||||
input.all = 0;
|
||||
|
||||
input.bit.bit0 = !J0;
|
||||
input.bit.bit1 = !J1;
|
||||
input.bit.bit2 = !J2;
|
||||
input.bit.bit3 = !J3;
|
||||
|
||||
return input.all;
|
||||
}
|
||||
|
||||
uint16_t TestJumper(void)
|
||||
{
|
||||
return !Jselect;
|
||||
}
|
||||
|
||||
void ReadSeanus(void)
|
||||
{
|
||||
static uint32_t cownt=0;
|
||||
static uint32_t sum_u[4];
|
||||
static float flt_u[4];
|
||||
static uint8_t Ist=1;
|
||||
uint8_t i;
|
||||
|
||||
if(Ist)
|
||||
{
|
||||
Ist=0;
|
||||
for(i=0;i<4;i++)
|
||||
{
|
||||
Squazh_U[i]=100;
|
||||
flt_u[i]=10000.0;
|
||||
sum_u[i]=0;
|
||||
} }
|
||||
|
||||
sum_u[0] += !IN_11;
|
||||
sum_u[1] += !IN_12;
|
||||
sum_u[2] += !IN_13;
|
||||
sum_u[3] += !IN_14;
|
||||
|
||||
if(++cownt>=10000)
|
||||
{
|
||||
cownt=0;
|
||||
|
||||
for(i=0;i<4;i++)
|
||||
{
|
||||
flt_u[i] +=((float)sum_u[i]-flt_u[i])/3+1;
|
||||
Squazh_U[i]=flt_u[i]/100;
|
||||
sum_u[i] = 0;
|
||||
} } }
|
||||
|
||||
|
||||
338
Core/Src/main.c
338
Core/Src/main.c
@ -6,13 +6,12 @@
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2022 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
@ -27,19 +26,16 @@
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
#include "package.h"
|
||||
#include "message.h"
|
||||
#include "lampa.h"
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
FLAG flag;
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
@ -51,9 +47,6 @@ FLAG flag;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
static long Falling_asleep;
|
||||
uint8_t CanGO=0, timGo=0;
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
@ -65,24 +58,6 @@ void SystemClock_Config(void);
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
int Isit(int num, int i, int z)
|
||||
{
|
||||
int res, pls;
|
||||
|
||||
if((num<0)||(num>=0x80)) return 0;
|
||||
res = Maska[i][num/0x10];
|
||||
res &= (1<<(num&0x0F));
|
||||
|
||||
if(z)
|
||||
{
|
||||
pls = (espero[num]>CanRestart[i]/2);
|
||||
pls = pls || county[num];
|
||||
res = res && pls;
|
||||
}
|
||||
|
||||
return res;
|
||||
}
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
@ -94,11 +69,6 @@ int main(void)
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
static int i,j,n,z,mask,qua;
|
||||
static int cancount[2]={1,2},cancell[2]={0,0},candid[2]={0,0};
|
||||
static unsigned int masca[8];
|
||||
static uint16_t precom=0;
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
@ -107,7 +77,7 @@ int main(void)
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
MX_IWDG_Init();
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
@ -124,302 +94,16 @@ int main(void)
|
||||
MX_IWDG_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
LED_0_ON;
|
||||
LED_1_OFF;
|
||||
LED_2_ON;
|
||||
LED_3_OFF;
|
||||
|
||||
for(i=0;i<10;i++)
|
||||
{
|
||||
LED_0_TGL;
|
||||
LED_1_TGL;
|
||||
LED_2_TGL;
|
||||
LED_3_TGL; HAL_Delay(50);
|
||||
}
|
||||
|
||||
Mode = ReadJumpers()+1;
|
||||
Setup_CAN_addr(Mode-1);
|
||||
Load_params();
|
||||
LastMode = Mode;
|
||||
Protokol = PROTOKOL;
|
||||
|
||||
command=0;
|
||||
|
||||
for(i=0;i<0x80;i++)
|
||||
county[i]=1;
|
||||
for(i=0;i<8;i++)
|
||||
masca[i]=0;
|
||||
for(i=0;i<2;i++)
|
||||
CanRound[i]=
|
||||
CanCycle[i]=0;
|
||||
|
||||
timGo=1;
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
if (flag.force_pause)
|
||||
{
|
||||
__disable_irq();
|
||||
for(int i=0;i<flag.pause;i++);
|
||||
__enable_irq();
|
||||
}
|
||||
|
||||
if( CanGO)
|
||||
{ CanGO=0;
|
||||
|
||||
for(i=0;i<0x80;i++)
|
||||
if(espero[i]<30000) espero[i]++;
|
||||
|
||||
for(i=0;i<2;i++)
|
||||
if(cancount[i]) cancount[i]--;
|
||||
else cancell[i] = 0;
|
||||
}
|
||||
|
||||
for(i=0;i<2;i++)
|
||||
if( Cancount[i])
|
||||
if(!cancount[i])
|
||||
{
|
||||
while(1)
|
||||
{
|
||||
if( cancell[i]>= 0x80)
|
||||
{ cancell[i]=0;
|
||||
|
||||
if( candid[i])
|
||||
{ candid[i]=0;
|
||||
CanCycle[i]++;
|
||||
cancount[i] = CanWait[i];
|
||||
goto Next;
|
||||
} }
|
||||
|
||||
mask = Maska[i][cancell[i]/0x10] >> (cancell[i]&0x0F);
|
||||
if(!mask) cancell[i] = (cancell[i] + 0x10) & 0xFFF0 ;
|
||||
else
|
||||
{
|
||||
while(!(mask & 1))
|
||||
{
|
||||
cancell[i]++; mask >>= 1;
|
||||
}
|
||||
break;
|
||||
} }
|
||||
|
||||
z=1;
|
||||
if(espero[cancell[i]]>CanRestart[i])
|
||||
{
|
||||
county[cancell[i]]=1;
|
||||
z=0;
|
||||
}
|
||||
|
||||
if(modbus[cancell[i]] != archiv[cancell[i]])
|
||||
{
|
||||
if(cancell[i]==keys)
|
||||
for(j=0;j<CanRptLen;j++)
|
||||
county[cancell[i]+j] = CanRptVez;
|
||||
else
|
||||
county[cancell[i]] = 1;
|
||||
}
|
||||
|
||||
if (county[cancell[i]])
|
||||
{
|
||||
for(j= 3; j>0 && !Isit(cancell[i]+j,i,z); j--);
|
||||
for(n=j-3; n<0 && !Isit(cancell[i]+n,i,1); n++);
|
||||
|
||||
qua = 1 + j - n;
|
||||
cancell[i]+= n;
|
||||
|
||||
for(j=0;j<qua;j++)
|
||||
{
|
||||
n=cancell[i]+j;
|
||||
archiv[n]= modbus[n];
|
||||
espero[n]= 0;
|
||||
|
||||
if( county[n])
|
||||
{ county[n]--;
|
||||
if(!county[n] && n != cancyclo+i) candid[i]=1;
|
||||
}
|
||||
if(!county[n]) masca[n/0x10] |= (1<<(n&0x0F));
|
||||
}
|
||||
|
||||
CAN_send(archiv,cancell[i],qua);
|
||||
|
||||
cancount[i] = Cancount[i];
|
||||
cancell[i]+=qua;
|
||||
|
||||
for(j=0;j<8;j++)
|
||||
if((masca[j] & Maska[i][j]) != Maska[i][j]) break;
|
||||
if(j==8)
|
||||
{
|
||||
for(j=0;j<8;j++) masca[j]&=~Maska[i][j];
|
||||
CanRound[i]++;
|
||||
}
|
||||
|
||||
if( Cancount[i]>1)
|
||||
if(!cancount[!i])
|
||||
cancount[!i]=1;
|
||||
}
|
||||
else
|
||||
cancell[i]++;
|
||||
}
|
||||
|
||||
Next:
|
||||
|
||||
ReadEnteres();
|
||||
|
||||
if(Errors.all|Alarms.all)
|
||||
Pvt4_OFF;
|
||||
else Pvt4_ON; // ñèãíàë "Ñèñòåìà ÂÝÏ â íîðìå"
|
||||
|
||||
if(Errors.all) Pvt3_ON; // ñèãíàë "Àâàðèÿ ñèñòåìû ÂÝÏ"
|
||||
else Pvt3_OFF;
|
||||
|
||||
if(Falling_asleep) Pvt2_ON; // Ïîêà íå ñïèì, ýòî çàìêíóòî
|
||||
else Pvt2_OFF; // ñèãíàë "Óïðàâëåíèå ñåòüþ 24Â"
|
||||
|
||||
|
||||
if(Commands!=precom)
|
||||
{
|
||||
command= (~precom|command) & Commands;
|
||||
}
|
||||
precom = Commands;
|
||||
|
||||
if(cDefParam)
|
||||
{
|
||||
cDefParam=0;
|
||||
Default_params();
|
||||
}
|
||||
|
||||
if(cSaveParam)
|
||||
{
|
||||
cSaveParam=0;
|
||||
Save_params();
|
||||
}
|
||||
|
||||
if(cLoadParam)
|
||||
{
|
||||
cLoadParam=0;
|
||||
Load_params();
|
||||
}
|
||||
|
||||
if(cCanReset)
|
||||
{
|
||||
cCanReset=0;
|
||||
|
||||
for(i=0;i<0x80;i++)
|
||||
county[i]=1;
|
||||
for(i=0;i<2;i++)
|
||||
CanCycle[i]=
|
||||
CanRound[i]=
|
||||
cancount[i]=
|
||||
cancell[i]=0;
|
||||
for(i=0;i<8;i++)
|
||||
masca[i]=0;
|
||||
} } }
|
||||
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
|
||||
void Millisecond()
|
||||
{
|
||||
static int CanPowse;
|
||||
|
||||
static unsigned int
|
||||
count_blink=0, count_bright=0, count_mode,
|
||||
blink_over, blink_alarm, power_lamp, work_diod, norm_diod;
|
||||
static int preTest;
|
||||
int TST;
|
||||
|
||||
#define CANPOWSE 10 // 10 msec
|
||||
#define BLINK_TIME 250 // .25 sec
|
||||
|
||||
if(!cReset)
|
||||
IWDG->KR = 0xAAAA;//HAL_IWDG_Refresh(&hiwdg);
|
||||
|
||||
if(!timGo) return;
|
||||
|
||||
Jumpers.byt.byte_1 = ReadJumpers();
|
||||
Jumpers.bit.bit0 =
|
||||
Buttons.bit.bit0 = TestJumper();
|
||||
|
||||
if(++CanPowse >= CANPOWSE)
|
||||
{
|
||||
CanPowse = 0; CanGO = 1;
|
||||
}
|
||||
|
||||
if(Alarms.bit.bit8) // Ðàçðÿä áàòàðåè
|
||||
{
|
||||
if (Falling_asleep) Falling_asleep--;
|
||||
}
|
||||
else Falling_asleep = 1000L * Sleep_time;
|
||||
|
||||
TST = TestJumper() | cTestLamp;
|
||||
|
||||
if(TST & !preTest)
|
||||
{
|
||||
count_blink = BLINK_TIME;
|
||||
count_mode = 0;
|
||||
}
|
||||
preTest = TST;
|
||||
|
||||
if(++count_blink >= BLINK_TIME)
|
||||
{
|
||||
count_blink=0;
|
||||
count_mode++;
|
||||
blink_over = (count_mode & 1)?1:0;
|
||||
blink_alarm = (count_mode & 7)?1:0;
|
||||
}
|
||||
|
||||
power_lamp= 1;
|
||||
norm_diod = 1;
|
||||
work_diod =!blink_over;
|
||||
|
||||
if(TST)
|
||||
{
|
||||
power_lamp = blink_over;
|
||||
norm_diod = blink_over;
|
||||
work_diod = blink_over;
|
||||
}
|
||||
else
|
||||
if(Lightness)
|
||||
{
|
||||
power_lamp = norm_diod = 0;
|
||||
if(Lightness==2) power_lamp = norm_diod = 1;
|
||||
if(Lightness==3) power_lamp = norm_diod = blink_over;
|
||||
if(Lightness==4) power_lamp = norm_diod = blink_alarm;
|
||||
if(Lightness==5) power_lamp = norm_diod = !blink_alarm;
|
||||
}
|
||||
else
|
||||
if(Errors.all)
|
||||
{
|
||||
power_lamp = blink_over;
|
||||
norm_diod = blink_over;
|
||||
}
|
||||
else
|
||||
if(Alarms.all)
|
||||
{
|
||||
power_lamp = blink_alarm;
|
||||
norm_diod = blink_alarm;
|
||||
}
|
||||
|
||||
if(++count_bright == 10) //maximum_bright
|
||||
{ count_bright = 0 ;
|
||||
|
||||
if(power_lamp) Pvt1_ON;
|
||||
else Pvt1_OFF;
|
||||
}
|
||||
|
||||
if(count_bright == Brightness)
|
||||
if(!TST) Pvt1_OFF; //îòêëþ÷åíèå ëàìïî÷êè
|
||||
|
||||
if(work_diod) LED_2_ON;
|
||||
else LED_2_OFF;
|
||||
|
||||
if(norm_diod) LED_3_ON;
|
||||
else LED_3_OFF;
|
||||
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
|
||||
@ -1,492 +0,0 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2022 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "can.h"
|
||||
#include "iwdg.h"
|
||||
#include "tim.h"
|
||||
#include "gpio.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
#include "package.h"
|
||||
#include "message.h"
|
||||
#include "lampa.h"
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
static long Falling_asleep;
|
||||
uint8_t CanGO=0, timGo=0;
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
int Isit(int num, int i, int z)
|
||||
{
|
||||
int res, pls;
|
||||
|
||||
if((num<0)||(num>=0x80)) return 0;
|
||||
res = Maska[i][num/0x10];
|
||||
res &= (1<<(num&0x0F));
|
||||
|
||||
if(z)
|
||||
{
|
||||
pls = (espero[num]>CanRestart[i]/2);
|
||||
pls = pls || county[num];
|
||||
res = res && pls;
|
||||
}
|
||||
|
||||
return res;
|
||||
}
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
static int i,j,n,z,mask,qua;
|
||||
static int cancount[2]={1,2},cancell[2]={0,0},candid[2]={0,0};
|
||||
static unsigned int masca[8];
|
||||
static uint16_t precom=0;
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_CAN_Init();
|
||||
MX_TIM4_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
LED_0_OFF;
|
||||
LED_1_OFF;
|
||||
LED_2_OFF;
|
||||
LED_3_OFF;
|
||||
|
||||
for(i=0;i<10;i++)
|
||||
{
|
||||
LED_0_TGL; HAL_Delay(15);
|
||||
LED_1_TGL; HAL_Delay(15);
|
||||
LED_2_TGL; HAL_Delay(15);
|
||||
LED_3_TGL; HAL_Delay(15);
|
||||
}
|
||||
|
||||
Mode = ReadJumpers()+1;
|
||||
Setup_CAN_addr(Mode-1);
|
||||
Load_params();
|
||||
LastMode = Mode;
|
||||
Protokol = PROTOKOL;
|
||||
|
||||
command=0;
|
||||
|
||||
for(i=0;i<0x80;i++)
|
||||
county[i]=1;
|
||||
for(i=0;i<8;i++)
|
||||
masca[i]=0;
|
||||
for(i=0;i<2;i++)
|
||||
CanRound[i]=
|
||||
CanCycle[i]=0;
|
||||
|
||||
timGo=1;
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
if( CanGO)
|
||||
{ CanGO=0;
|
||||
|
||||
for(i=0;i<0x80;i++)
|
||||
if(espero[i]<30000) espero[i]++;
|
||||
|
||||
for(i=0;i<2;i++)
|
||||
if(cancount[i]) cancount[i]--;
|
||||
else cancell[i] = 0;
|
||||
}
|
||||
|
||||
for(i=0;i<2;i++)
|
||||
if( Cancount[i])
|
||||
if(!cancount[i])
|
||||
{
|
||||
while(1)
|
||||
{
|
||||
if( cancell[i]>= 0x80)
|
||||
{ cancell[i]=0;
|
||||
|
||||
if( candid[i])
|
||||
{ candid[i]=0;
|
||||
CanCycle[i]++;
|
||||
cancount[i] = CanWait[i];
|
||||
goto Next;
|
||||
} }
|
||||
|
||||
mask = Maska[i][cancell[i]/0x10] >> (cancell[i]&0x0F);
|
||||
if(!mask) cancell[i] = (cancell[i] + 0x10) & 0xFFF0 ;
|
||||
else
|
||||
{
|
||||
while(!(mask & 1))
|
||||
{
|
||||
cancell[i]++; mask >>= 1;
|
||||
}
|
||||
break;
|
||||
} }
|
||||
|
||||
z=1;
|
||||
if(espero[cancell[i]]>CanRestart[i])
|
||||
{
|
||||
county[cancell[i]]=1;
|
||||
z=0;
|
||||
}
|
||||
|
||||
if(modbus[cancell[i]] != archiv[cancell[i]])
|
||||
{
|
||||
if(cancell[i]==keys)
|
||||
for(j=0;j<CanRptLen;j++)
|
||||
county[cancell[i]+j] = CanRptVez;
|
||||
else
|
||||
county[cancell[i]] = 1;
|
||||
}
|
||||
|
||||
if (county[cancell[i]])
|
||||
{
|
||||
for(j= 3; j>0 && !Isit(cancell[i]+j,i,z); j--);
|
||||
for(n=j-3; n<0 && !Isit(cancell[i]+n,i,1); n++);
|
||||
|
||||
qua = 1 + j - n;
|
||||
cancell[i]+= n;
|
||||
|
||||
for(j=0;j<qua;j++)
|
||||
{
|
||||
n=cancell[i]+j;
|
||||
archiv[n]= modbus[n];
|
||||
espero[n]= 0;
|
||||
|
||||
if( county[n])
|
||||
{ county[n]--;
|
||||
if(!county[n] && n != cancyclo+i) candid[i]=1;
|
||||
}
|
||||
if(!county[n]) masca[n/0x10] |= (1<<(n&0x0F));
|
||||
}
|
||||
|
||||
CAN_send(archiv,cancell[i],qua);
|
||||
|
||||
cancount[i] = Cancount[i];
|
||||
cancell[i]+=qua;
|
||||
|
||||
for(j=0;j<8;j++)
|
||||
if((masca[j] & Maska[i][j]) != Maska[i][j]) break;
|
||||
if(j==8)
|
||||
{
|
||||
for(j=0;j<8;j++) masca[j]&=~Maska[i][j];
|
||||
CanRound[i]++;
|
||||
}
|
||||
|
||||
if( Cancount[i]>1)
|
||||
if(!cancount[!i])
|
||||
cancount[!i]=1;
|
||||
}
|
||||
else
|
||||
cancell[i]++;
|
||||
}
|
||||
|
||||
Next:
|
||||
|
||||
ReadEnteres();
|
||||
|
||||
if(Errors.all|Alarms.all)
|
||||
Pvt4_OFF;
|
||||
else Pvt4_ON; // ñèãíàë "Ñèñòåìà ÂÝÏ â íîðìå"
|
||||
|
||||
if(Errors.all) Pvt3_ON; // ñèãíàë "Àâàðèÿ ñèñòåìû ÂÝÏ"
|
||||
else Pvt3_OFF;
|
||||
|
||||
if(Falling_asleep) Pvt2_ON; // Ïîêà íå ñïèì, ýòî çàìêíóòî
|
||||
else Pvt2_OFF; // ñèãíàë "Óïðàâëåíèå ñåòüþ 24Â"
|
||||
|
||||
|
||||
if(Commands!=precom)
|
||||
{
|
||||
command= (~precom|command) & Commands;
|
||||
modbus[23]=command;
|
||||
}
|
||||
precom = Commands;
|
||||
|
||||
if(cDefParam)
|
||||
{
|
||||
cDefParam=0;
|
||||
Default_params();
|
||||
}
|
||||
|
||||
if(cSaveParam)
|
||||
{
|
||||
cSaveParam=0;
|
||||
Save_params();
|
||||
}
|
||||
|
||||
if(cLoadParam)
|
||||
{
|
||||
cLoadParam=0;
|
||||
Load_params();
|
||||
}
|
||||
|
||||
if(cCanReset)
|
||||
{
|
||||
cCanReset=0;
|
||||
|
||||
for(i=0;i<0x80;i++)
|
||||
county[i]=1;
|
||||
for(i=0;i<2;i++)
|
||||
CanCycle[i]=
|
||||
CanRound[i]=
|
||||
cancount[i]=
|
||||
cancell[i]=0;
|
||||
for(i=0;i<8;i++)
|
||||
masca[i]=0;
|
||||
} } }
|
||||
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
|
||||
void Millisecond()
|
||||
{
|
||||
static int CanPowse;
|
||||
|
||||
static unsigned int
|
||||
count_blink=0, count_bright=0, count_mode,
|
||||
blink_over, blink_alarm, power_lamp, work_diod, norm_diod;
|
||||
static int preTest;
|
||||
int TST;
|
||||
|
||||
#define CANPOWSE 10 // 10 msec
|
||||
#define BLINK_TIME 250 // .25 sec
|
||||
|
||||
if(!cReset)
|
||||
HAL_IWDG_Refresh(&hiwdg);
|
||||
|
||||
if(!timGo) return;
|
||||
|
||||
Jumpers.byt.byte_1 = ReadJumpers();
|
||||
Jumpers.bit.bit0 =
|
||||
Buttons.bit.bit0 = TestJumper();
|
||||
|
||||
if(++CanPowse >= CANPOWSE)
|
||||
{
|
||||
CanPowse = 0; CanGO = 1;
|
||||
}
|
||||
|
||||
if(Alarms.bit.bit8) // Ðàçðÿä áàòàðåè
|
||||
{
|
||||
if (Falling_asleep) Falling_asleep--;
|
||||
}
|
||||
else Falling_asleep = 1000L * Sleep_time;
|
||||
|
||||
TST = TestJumper() | cTestLamp;
|
||||
|
||||
if(TST & !preTest)
|
||||
{
|
||||
count_blink = BLINK_TIME;
|
||||
count_mode = 0;
|
||||
}
|
||||
preTest = TST;
|
||||
|
||||
if(++count_blink >= BLINK_TIME)
|
||||
{
|
||||
count_blink=0;
|
||||
count_mode++;
|
||||
blink_over = (count_mode & 1)?1:0;
|
||||
blink_alarm = (count_mode & 7)?1:0;
|
||||
}
|
||||
|
||||
power_lamp= 1;
|
||||
norm_diod= 1;
|
||||
work_diod = 1;
|
||||
|
||||
if(TST)
|
||||
{
|
||||
power_lamp = blink_over;
|
||||
norm_diod = blink_over;
|
||||
work_diod =!blink_over;
|
||||
}
|
||||
else
|
||||
if(Lightness)
|
||||
{
|
||||
power_lamp = norm_diod = 0;
|
||||
if(Lightness==2) power_lamp = norm_diod = 1;
|
||||
if(Lightness==3) power_lamp = norm_diod = blink_over;
|
||||
if(Lightness==4) power_lamp = norm_diod = blink_alarm;
|
||||
if(Lightness==5) power_lamp = norm_diod = !blink_alarm;
|
||||
}
|
||||
else
|
||||
if(Errors.all)
|
||||
{
|
||||
power_lamp = blink_over;
|
||||
norm_diod = blink_over;
|
||||
}
|
||||
else
|
||||
if(Alarms.all)
|
||||
{
|
||||
power_lamp = blink_alarm;
|
||||
norm_diod = blink_alarm;
|
||||
}
|
||||
|
||||
if(++count_bright == 10) //maximum_bright
|
||||
{ count_bright = 0 ;
|
||||
|
||||
if(power_lamp) Pvt1_ON;
|
||||
else Pvt1_OFF;
|
||||
}
|
||||
|
||||
if(count_bright == Brightness)
|
||||
if(!TST) Pvt1_OFF; //îòêëþ÷åíèå ëàìïî÷êè
|
||||
|
||||
if(work_diod) LED_2_ON;
|
||||
else LED_2_OFF;
|
||||
|
||||
if(norm_diod) LED_3_ON;
|
||||
else LED_3_OFF;
|
||||
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL10;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
HAL_RCC_MCOConfig(RCC_MCO, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@ -1,129 +0,0 @@
|
||||
#include "stm32f1xx_hal.h"
|
||||
|
||||
#include "struc.h"
|
||||
#include "crc16.h"
|
||||
#include "package.h"
|
||||
#include "message.h"
|
||||
#include "eeprom.h"
|
||||
|
||||
uint16_t params[Modbus_LEN+1],
|
||||
modbus[Modbus_LEN],
|
||||
archiv[Modbus_LEN],
|
||||
county[Modbus_LEN],
|
||||
espero[Modbus_LEN];
|
||||
|
||||
uint16_t Mode;
|
||||
|
||||
LONGE* outputs;
|
||||
|
||||
void Init_packMask(void);
|
||||
|
||||
uint16_t Maska[2][8];
|
||||
|
||||
|
||||
void Default_params()
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
for(i=0;i<Modbus_LEN;i++)
|
||||
{
|
||||
modbus[i] = 0;
|
||||
}
|
||||
|
||||
Alarm_mask.all = 0x3FFF;
|
||||
Alarm_mask.bit.bit7 = 0; // Заряд накопителя
|
||||
Alarm_mask.bit.bitC = 0; // резерв
|
||||
|
||||
Error_mask.all = 0;
|
||||
Error_mask.bit.bit9 = 1; // Авария в сети 24 В
|
||||
|
||||
for(i=0;i<4;i++)
|
||||
Squazh_L[i] = 90;
|
||||
|
||||
LastMode = Mode;
|
||||
|
||||
Sleep_time = 60; // минута чтобы отключиться
|
||||
|
||||
Cancount[m_FAST] = 5; // * 10msec, пауза между посылками CAN
|
||||
Cancount[m_SLOW] = 100; // * 10msec, пауза между посылками CAN
|
||||
|
||||
CanWait[m_FAST] = 1; // * 10msec, пауза после цикла
|
||||
CanWait[m_SLOW] = 1; // * 10msec, пауза после цикла
|
||||
|
||||
CanRestart[m_FAST] = 500; // * 10msec, перезапуск посылки
|
||||
CanRestart[m_SLOW] = 1000; // * 10msec, перезапуск посылки
|
||||
|
||||
CanRptVez = 3; // кол-во повторений посылки «keys»
|
||||
CanRptLen = 3; // длина повтораемой посылки «keys»
|
||||
|
||||
Brightness = 10;
|
||||
|
||||
Protokol = PROTOKOL;
|
||||
}
|
||||
|
||||
void Load_params()
|
||||
{
|
||||
unsigned int i,crc;
|
||||
unsigned int adr = FLASH_EEPROM_BASE;
|
||||
|
||||
for(int j=0; j<Modbus_LEN+1; j+=1)
|
||||
{
|
||||
params[j] = watInTheFlash(adr) & 0xFFFF;
|
||||
adr += 0x2;
|
||||
}
|
||||
crc = get_crc16(params,Modbus_LEN);
|
||||
if( (crc==params[Modbus_LEN]) &&
|
||||
(crc !=0xFFFF) &&
|
||||
(Mode == params[126]))
|
||||
{
|
||||
for(i=0;i<Modbus_LEN;i++) modbus[i] = params[i];
|
||||
Commands=0;
|
||||
}
|
||||
else
|
||||
{
|
||||
Default_params();
|
||||
Save_params();
|
||||
}
|
||||
|
||||
Init_packMask();
|
||||
}
|
||||
|
||||
void Save_params()
|
||||
{
|
||||
unsigned int i,dif=0;
|
||||
|
||||
for(i=0;i<Modbus_LEN;i++)
|
||||
if(params[i] != modbus[i])
|
||||
{
|
||||
params[i] = modbus[i];
|
||||
dif=1;
|
||||
}
|
||||
if(dif)
|
||||
{
|
||||
params[Modbus_LEN] = get_crc16(params,Modbus_LEN);
|
||||
putIntoEeprom(Modbus_LEN+1, params);
|
||||
} }
|
||||
|
||||
void Init_packMask()
|
||||
{
|
||||
int i;
|
||||
|
||||
for(i=0;i<8;i++)
|
||||
{
|
||||
Maska[m_FAST][i] = 0;
|
||||
Maska[m_SLOW][i] = 0;
|
||||
}
|
||||
|
||||
Maska[m_FAST][0]|= 0x0007; // Дискретные входы, неисправности и аварии
|
||||
Maska[m_SLOW][0]|= 0x0300; // Маски на неисправности и аварии
|
||||
Maska[m_SLOW][1]|= 0x0003; // Состояние джамперов
|
||||
Maska[m_SLOW][1]|= 0x0F00; // Скважность датчика напряжения
|
||||
Maska[m_SLOW][3]|= 0x000F; // Аварийная уставка скважности
|
||||
Maska[m_SLOW][4]|= 0x0100; // Время автоматического отключения
|
||||
Maska[m_SLOW][6]|= 0x05FF; // Яркость лампы и периоды посылок
|
||||
Maska[m_FAST][7]|= 0x0100; // Счетчик посылок
|
||||
Maska[m_SLOW][7]|= 0x0E00; // Счетчик посылок
|
||||
Maska[m_SLOW][7]|= 0xE000; // Протокол, адрес, команды
|
||||
}
|
||||
|
||||
|
||||
@ -8,13 +8,12 @@
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2022 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
@ -6,13 +6,12 @@
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2022 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
@ -76,7 +75,7 @@ void NMI_Handler(void)
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1)
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
@ -254,7 +253,7 @@ void TIM8_UP_IRQHandler(void)
|
||||
/* USER CODE END TIM8_UP_IRQn 0 */
|
||||
HAL_TIM_IRQHandler(&htim8);
|
||||
/* USER CODE BEGIN TIM8_UP_IRQn 1 */
|
||||
Millisecond();
|
||||
|
||||
/* USER CODE END TIM8_UP_IRQn 1 */
|
||||
}
|
||||
|
||||
|
||||
@ -1,156 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file syscalls.c
|
||||
* @author Auto-generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE Minimal System calls file
|
||||
*
|
||||
* For more information about which c-functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the Newlib libc-manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <sys/stat.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <signal.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include <sys/times.h>
|
||||
|
||||
|
||||
/* Variables */
|
||||
extern int __io_putchar(int ch) __attribute__((weak));
|
||||
extern int __io_getchar(void) __attribute__((weak));
|
||||
|
||||
|
||||
char *__env[1] = { 0 };
|
||||
char **environ = __env;
|
||||
|
||||
|
||||
/* Functions */
|
||||
void initialise_monitor_handles()
|
||||
{
|
||||
}
|
||||
|
||||
int _getpid(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _kill(int pid, int sig)
|
||||
{
|
||||
errno = EINVAL;
|
||||
return -1;
|
||||
}
|
||||
|
||||
void _exit (int status)
|
||||
{
|
||||
_kill(status, -1);
|
||||
while (1) {} /* Make sure we hang here */
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _read(int file, char *ptr, int len)
|
||||
{
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
*ptr++ = __io_getchar();
|
||||
}
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _write(int file, char *ptr, int len)
|
||||
{
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
__io_putchar(*ptr++);
|
||||
}
|
||||
return len;
|
||||
}
|
||||
|
||||
int _close(int file)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
int _fstat(int file, struct stat *st)
|
||||
{
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _isatty(int file)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _lseek(int file, int ptr, int dir)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _open(char *path, int flags, ...)
|
||||
{
|
||||
/* Pretend like we always fail */
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _wait(int *status)
|
||||
{
|
||||
errno = ECHILD;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _unlink(char *name)
|
||||
{
|
||||
errno = ENOENT;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _times(struct tms *buf)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _stat(char *file, struct stat *st)
|
||||
{
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _link(char *old, char *new)
|
||||
{
|
||||
errno = EMLINK;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _fork(void)
|
||||
{
|
||||
errno = EAGAIN;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _execve(char *name, char **argv, char **env)
|
||||
{
|
||||
errno = ENOMEM;
|
||||
return -1;
|
||||
}
|
||||
@ -1,80 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sysmem.c
|
||||
* @author Generated by STM32CubeIDE
|
||||
* @brief STM32CubeIDE System Memory calls file
|
||||
*
|
||||
* For more information about which C functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the newlib libc manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <errno.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/**
|
||||
* Pointer to the current high watermark of the heap usage
|
||||
*/
|
||||
static uint8_t *__sbrk_heap_end = NULL;
|
||||
|
||||
/**
|
||||
* @brief _sbrk() allocates memory to the newlib heap and is used by malloc
|
||||
* and others from the C library
|
||||
*
|
||||
* @verbatim
|
||||
* ############################################################################
|
||||
* # .data # .bss # newlib heap # MSP stack #
|
||||
* # # # # Reserved by _Min_Stack_Size #
|
||||
* ############################################################################
|
||||
* ^-- RAM start ^-- _end _estack, RAM end --^
|
||||
* @endverbatim
|
||||
*
|
||||
* This implementation starts allocating at the '_end' linker symbol
|
||||
* The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
|
||||
* The implementation considers '_estack' linker symbol to be RAM end
|
||||
* NOTE: If the MSP stack, at any point during execution, grows larger than the
|
||||
* reserved size, please increase the '_Min_Stack_Size'.
|
||||
*
|
||||
* @param incr Memory size
|
||||
* @return Pointer to allocated memory
|
||||
*/
|
||||
void *_sbrk(ptrdiff_t incr)
|
||||
{
|
||||
extern uint8_t _end; /* Symbol defined in the linker script */
|
||||
extern uint8_t _estack; /* Symbol defined in the linker script */
|
||||
extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
|
||||
const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
|
||||
const uint8_t *max_heap = (uint8_t *)stack_limit;
|
||||
uint8_t *prev_heap_end;
|
||||
|
||||
/* Initialize heap end at first call */
|
||||
if (NULL == __sbrk_heap_end)
|
||||
{
|
||||
__sbrk_heap_end = &_end;
|
||||
}
|
||||
|
||||
/* Protect heap from growing into the reserved MSP stack */
|
||||
if (__sbrk_heap_end + incr > max_heap)
|
||||
{
|
||||
errno = ENOMEM;
|
||||
return (void *)-1;
|
||||
}
|
||||
|
||||
prev_heap_end = __sbrk_heap_end;
|
||||
__sbrk_heap_end += incr;
|
||||
|
||||
return (void *)prev_heap_end;
|
||||
}
|
||||
@ -33,13 +33,12 @@
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
@ -139,7 +138,7 @@
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
uint32_t SystemCoreClock = 8000000;
|
||||
const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
|
||||
@ -404,5 +403,4 @@ void SystemInit_ExtMemCtl(void)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
*/
|
||||
|
||||
@ -22,8 +22,6 @@
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
#include "lampa.h"
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
TIM_HandleTypeDef htim4;
|
||||
@ -64,11 +62,7 @@ void MX_TIM4_Init(void)
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN TIM4_Init 2 */
|
||||
|
||||
HAL_TIM_Base_MspInit(&htim4);
|
||||
|
||||
HAL_TIM_Base_Start_IT(&htim4);
|
||||
|
||||
|
||||
/* USER CODE END TIM4_Init 2 */
|
||||
|
||||
}
|
||||
@ -114,14 +108,4 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
//void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
|
||||
//{
|
||||
|
||||
// if(htim->Instance == TIM4) //check if the interrupt comes from TIM1
|
||||
|
||||
// ReadSeanus();
|
||||
//
|
||||
//}
|
||||
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
@ -1,468 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103xe.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F103xE Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Configure external SRAM mounted on STM3210E-EVAL board
|
||||
* to be used as data memory (optional, to be enabled by user)
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_IRQHandler
|
||||
.word TIM8_UP_IRQHandler
|
||||
.word TIM8_TRG_COM_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word FSMC_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_IRQHandler
|
||||
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_IRQHandler
|
||||
.thumb_set TIM8_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@ -1,83 +0,0 @@
|
||||
Apache License
|
||||
Version 2.0, January 2004
|
||||
http://www.apache.org/licenses/
|
||||
|
||||
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
|
||||
|
||||
1. Definitions.
|
||||
|
||||
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
|
||||
|
||||
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
|
||||
|
||||
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
|
||||
|
||||
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
|
||||
|
||||
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
|
||||
|
||||
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
|
||||
|
||||
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
|
||||
|
||||
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
|
||||
|
||||
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
|
||||
|
||||
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
|
||||
|
||||
2. Grant of Copyright License.
|
||||
|
||||
Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
|
||||
|
||||
3. Grant of Patent License.
|
||||
|
||||
Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
|
||||
|
||||
4. Redistribution.
|
||||
|
||||
You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
|
||||
1.You must give any other recipients of the Work or Derivative Works a copy of this License; and
|
||||
2.You must cause any modified files to carry prominent notices stating that You changed the files; and
|
||||
3.You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
|
||||
4.If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
|
||||
|
||||
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
|
||||
|
||||
5. Submission of Contributions.
|
||||
|
||||
Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
|
||||
|
||||
6. Trademarks.
|
||||
|
||||
This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
|
||||
|
||||
7. Disclaimer of Warranty.
|
||||
|
||||
Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
|
||||
|
||||
8. Limitation of Liability.
|
||||
|
||||
In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
|
||||
|
||||
9. Accepting Warranty or Additional Liability.
|
||||
|
||||
While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
|
||||
|
||||
END OF TERMS AND CONDITIONS
|
||||
|
||||
APPENDIX:
|
||||
|
||||
Copyright [2019] [STMicroelectronics]
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
@ -1,232 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_iwdg.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of IWDG HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F1xx_HAL_IWDG_H
|
||||
#define STM32F1xx_HAL_IWDG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f1xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F1xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG IWDG
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Types IWDG Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief IWDG Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
|
||||
This parameter can be a value of @ref IWDG_Prescaler */
|
||||
|
||||
uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
|
||||
|
||||
} IWDG_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief IWDG Handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
IWDG_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
IWDG_InitTypeDef Init; /*!< IWDG required parameters */
|
||||
} IWDG_HandleTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_Prescaler IWDG Prescaler
|
||||
* @{
|
||||
*/
|
||||
#define IWDG_PRESCALER_4 0x00000000U /*!< IWDG prescaler set to 4 */
|
||||
#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
|
||||
#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
|
||||
#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
|
||||
#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
|
||||
#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
|
||||
#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the IWDG peripheral.
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
|
||||
|
||||
/**
|
||||
* @brief Reload IWDG counter with value defined in the reload register
|
||||
* (write access to IWDG_PR and IWDG_RLR registers disabled).
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/Start functions ********************************************/
|
||||
HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Private_Constants IWDG Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief IWDG Key Register BitMask
|
||||
*/
|
||||
#define IWDG_KEY_RELOAD 0x000000AAU /*!< IWDG Reload Counter Enable */
|
||||
#define IWDG_KEY_ENABLE 0x000000CCU /*!< IWDG Peripheral Enable */
|
||||
#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00000055U /*!< IWDG KR Write Access Enable */
|
||||
#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */
|
||||
|
||||
//#define IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */
|
||||
//#define IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */
|
||||
//#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */
|
||||
//#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup IWDG_Private_Macros IWDG Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable write access to IWDG_PR and IWDG_RLR registers.
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
|
||||
|
||||
/**
|
||||
* @brief Disable write access to IWDG_PR and IWDG_RLR registers.
|
||||
* @param __HANDLE__ IWDG handle
|
||||
* @retval None
|
||||
*/
|
||||
#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
|
||||
|
||||
/**
|
||||
* @brief Check IWDG prescaler value.
|
||||
* @param __PRESCALER__ IWDG prescaler value
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_8) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_16) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_32) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_64) || \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_128)|| \
|
||||
((__PRESCALER__) == IWDG_PRESCALER_256))
|
||||
|
||||
/**
|
||||
* @brief Check IWDG reload value.
|
||||
* @param __RELOAD__ IWDG reload value
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F1xx_HAL_IWDG_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@ -1,3 +0,0 @@
|
||||
# Copyright (c) 2016 STMicroelectronics
|
||||
|
||||
This software component is licensed by STMicroelectronics under the **BSD 3-Clause** license. You may not use this file except in compliance with this license. You may obtain a copy of the license [here](https://opensource.org/licenses/BSD-3-Clause).
|
||||
7667
MDK-ARM/JLinkLog.txt
7667
MDK-ARM/JLinkLog.txt
File diff suppressed because it is too large
Load Diff
@ -15,6 +15,9 @@ OverrideMemMap = 0
|
||||
AllowSimulation = 1
|
||||
ScriptFile=""
|
||||
[FLASH]
|
||||
RMWThreshold = 0x400
|
||||
Loaders=""
|
||||
EraseType = 0x00
|
||||
CacheExcludeSize = 0x00
|
||||
CacheExcludeAddr = 0x00
|
||||
MinNumBytesFlashDL = 0
|
||||
@ -25,6 +28,7 @@ EnableFlashDL = 2
|
||||
Override = 0
|
||||
Device="ARM7"
|
||||
[GENERAL]
|
||||
MaxNumTransfers = 0x00
|
||||
WorkRAMSize = 0x00
|
||||
WorkRAMAddr = 0x00
|
||||
RAMUsageLimit = 0x00
|
||||
@ -37,3 +41,7 @@ RdOverrideAddr = 0xFFFFFFFF
|
||||
WrOverrideOrMask = 0x00
|
||||
WrOverrideAndMask = 0xFFFFFFFF
|
||||
WrOverrideAddr = 0xFFFFFFFF
|
||||
[RAM]
|
||||
VerifyDownload = 0x00
|
||||
[DYN_MEM_MAP]
|
||||
NumUserRegion = 0x00
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -14,13 +14,12 @@
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017 STMicroelectronics.
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
@ -353,4 +352,3 @@ __user_initial_stackheap
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
||||
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
@ -117,30 +117,10 @@
|
||||
<pMon>Segger\JL2CM3.dll</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>DLGUARM</Key>
|
||||
<Name></Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>ARMRTXEVENTFLAGS</Key>
|
||||
<Name>-L70 -Z18 -C0 -M0 -T1</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>DLGTARM</Key>
|
||||
<Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>ARMDBGFLAGS</Key>
|
||||
<Name></Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>JL2CM3</Key>
|
||||
<Name>-U60145543 -O14 -S3 -ZTIFSpeedSel3000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(4) -N01("Unknown JTAG device") -D01(06414041) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)</Name>
|
||||
<Name>-U60145543 -O14 -S10 -ZTIFSpeedSel25000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(4) -N01("Unknown JTAG device") -D01(06414041) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
@ -150,90 +130,10 @@
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>ST-LINKIII-KEIL_SWO</Key>
|
||||
<Name>-U52FF6D067188485535530767 -O2190 -SF268436581 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL040000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)</Name>
|
||||
<Name>-U-O142 -O2190 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL040000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint>
|
||||
<Bp>
|
||||
<Number>0</Number>
|
||||
<Type>0</Type>
|
||||
<LineNumber>240</LineNumber>
|
||||
<EnabledFlag>1</EnabledFlag>
|
||||
<Address>26</Address>
|
||||
<ByteObject>0</ByteObject>
|
||||
<HtxType>0</HtxType>
|
||||
<ManyObjects>0</ManyObjects>
|
||||
<SizeOfObject>0</SizeOfObject>
|
||||
<BreakByAccess>0</BreakByAccess>
|
||||
<BreakIfRCount>1</BreakIfRCount>
|
||||
<Filename>../Core/Src/system_stm32f1xx.c</Filename>
|
||||
<ExecCommand></ExecCommand>
|
||||
<Expression>\\uksvep_2_2_v1\../Core/Src/system_stm32f1xx.c\240</Expression>
|
||||
</Bp>
|
||||
<Bp>
|
||||
<Number>1</Number>
|
||||
<Type>0</Type>
|
||||
<LineNumber>107</LineNumber>
|
||||
<EnabledFlag>1</EnabledFlag>
|
||||
<Address>134235170</Address>
|
||||
<ByteObject>0</ByteObject>
|
||||
<HtxType>0</HtxType>
|
||||
<ManyObjects>0</ManyObjects>
|
||||
<SizeOfObject>0</SizeOfObject>
|
||||
<BreakByAccess>0</BreakByAccess>
|
||||
<BreakIfRCount>1</BreakIfRCount>
|
||||
<Filename>../Core/Src/main.c</Filename>
|
||||
<ExecCommand></ExecCommand>
|
||||
<Expression>\\uksvep_2_2_v1\../Core/Src/main.c\107</Expression>
|
||||
</Bp>
|
||||
</Breakpoint>
|
||||
<WatchWindow1>
|
||||
<Ww>
|
||||
<count>0</count>
|
||||
<WinNumber>1</WinNumber>
|
||||
<ItemText>CanGo</ItemText>
|
||||
</Ww>
|
||||
<Ww>
|
||||
<count>1</count>
|
||||
<WinNumber>1</WinNumber>
|
||||
<ItemText>cancell[i]</ItemText>
|
||||
</Ww>
|
||||
<Ww>
|
||||
<count>2</count>
|
||||
<WinNumber>1</WinNumber>
|
||||
<ItemText>hiwdg</ItemText>
|
||||
</Ww>
|
||||
<Ww>
|
||||
<count>3</count>
|
||||
<WinNumber>1</WinNumber>
|
||||
<ItemText>flag,0x0A</ItemText>
|
||||
</Ww>
|
||||
</WatchWindow1>
|
||||
<WatchWindow2>
|
||||
<Ww>
|
||||
<count>0</count>
|
||||
<WinNumber>2</WinNumber>
|
||||
<ItemText>modbus</ItemText>
|
||||
</Ww>
|
||||
<Ww>
|
||||
<count>1</count>
|
||||
<WinNumber>2</WinNumber>
|
||||
<ItemText>~precom</ItemText>
|
||||
</Ww>
|
||||
<Ww>
|
||||
<count>2</count>
|
||||
<WinNumber>2</WinNumber>
|
||||
<ItemText>params[128]</ItemText>
|
||||
</Ww>
|
||||
</WatchWindow2>
|
||||
<MemoryWindow1>
|
||||
<Mm>
|
||||
<WinNumber>1</WinNumber>
|
||||
<SubType>0</SubType>
|
||||
<ItemText>0</ItemText>
|
||||
<AccSizeX>0</AccSizeX>
|
||||
</Mm>
|
||||
</MemoryWindow1>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
@ -276,37 +176,19 @@
|
||||
<pszMrulep></pszMrulep>
|
||||
<pSingCmdsp></pSingCmdsp>
|
||||
<pMultCmdsp></pMultCmdsp>
|
||||
<SystemViewers>
|
||||
<Entry>
|
||||
<Name>System Viewer\DBG</Name>
|
||||
<WinId>35904</WinId>
|
||||
</Entry>
|
||||
<Entry>
|
||||
<Name>System Viewer\GPIOC</Name>
|
||||
<WinId>35903</WinId>
|
||||
</Entry>
|
||||
<Entry>
|
||||
<Name>System Viewer\IWDG</Name>
|
||||
<WinId>35905</WinId>
|
||||
</Entry>
|
||||
<Entry>
|
||||
<Name>System Viewer\RCC</Name>
|
||||
<WinId>35902</WinId>
|
||||
</Entry>
|
||||
</SystemViewers>
|
||||
<DebugDescription>
|
||||
<Enable>1</Enable>
|
||||
<EnableFlashSeq>0</EnableFlashSeq>
|
||||
<EnableLog>0</EnableLog>
|
||||
<Protocol>1</Protocol>
|
||||
<DbgClock>-2146358648</DbgClock>
|
||||
<Protocol>2</Protocol>
|
||||
<DbgClock>10000000</DbgClock>
|
||||
</DebugDescription>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
<Group>
|
||||
<GroupName>Application/MDK-ARM</GroupName>
|
||||
<tvExp>1</tvExp>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<cbSel>0</cbSel>
|
||||
<RteFlg>0</RteFlg>
|
||||
@ -326,7 +208,7 @@
|
||||
|
||||
<Group>
|
||||
<GroupName>Application/User/Core</GroupName>
|
||||
<tvExp>1</tvExp>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<cbSel>0</cbSel>
|
||||
<RteFlg>0</RteFlg>
|
||||
@ -337,54 +219,6 @@
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>..\Core\Src\crc16.c</PathWithFileName>
|
||||
<FilenameWithoutPath>crc16.c</FilenameWithoutPath>
|
||||
<RteFlg>0</RteFlg>
|
||||
<bShared>0</bShared>
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>3</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>..\Core\Src\eeprom.c</PathWithFileName>
|
||||
<FilenameWithoutPath>eeprom.c</FilenameWithoutPath>
|
||||
<RteFlg>0</RteFlg>
|
||||
<bShared>0</bShared>
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>4</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>..\Core\Src\lampa.c</PathWithFileName>
|
||||
<FilenameWithoutPath>lampa.c</FilenameWithoutPath>
|
||||
<RteFlg>0</RteFlg>
|
||||
<bShared>0</bShared>
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>5</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>..\Core\Src\message.c</PathWithFileName>
|
||||
<FilenameWithoutPath>message.c</FilenameWithoutPath>
|
||||
<RteFlg>0</RteFlg>
|
||||
<bShared>0</bShared>
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>6</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>../Core/Src/main.c</PathWithFileName>
|
||||
<FilenameWithoutPath>main.c</FilenameWithoutPath>
|
||||
<RteFlg>0</RteFlg>
|
||||
@ -392,9 +226,9 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>7</FileNumber>
|
||||
<FileNumber>3</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>1</tvExp>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>../Core/Src/gpio.c</PathWithFileName>
|
||||
@ -404,7 +238,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>8</FileNumber>
|
||||
<FileNumber>4</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -416,19 +250,19 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>9</FileNumber>
|
||||
<FileNumber>5</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>..\Core\Src\iwdg.c</PathWithFileName>
|
||||
<PathWithFileName>../Core/Src/iwdg.c</PathWithFileName>
|
||||
<FilenameWithoutPath>iwdg.c</FilenameWithoutPath>
|
||||
<RteFlg>0</RteFlg>
|
||||
<bShared>0</bShared>
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>10</FileNumber>
|
||||
<FileNumber>6</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -440,7 +274,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>11</FileNumber>
|
||||
<FileNumber>7</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -452,7 +286,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>12</FileNumber>
|
||||
<FileNumber>8</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -464,7 +298,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>2</GroupNumber>
|
||||
<FileNumber>13</FileNumber>
|
||||
<FileNumber>9</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -478,13 +312,13 @@
|
||||
|
||||
<Group>
|
||||
<GroupName>Drivers/STM32F1xx_HAL_Driver</GroupName>
|
||||
<tvExp>1</tvExp>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<cbSel>0</cbSel>
|
||||
<RteFlg>0</RteFlg>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>14</FileNumber>
|
||||
<FileNumber>10</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -496,7 +330,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>15</FileNumber>
|
||||
<FileNumber>11</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -508,7 +342,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>16</FileNumber>
|
||||
<FileNumber>12</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -520,7 +354,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>17</FileNumber>
|
||||
<FileNumber>13</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -532,7 +366,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>18</FileNumber>
|
||||
<FileNumber>14</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -544,7 +378,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>19</FileNumber>
|
||||
<FileNumber>15</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -556,7 +390,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>20</FileNumber>
|
||||
<FileNumber>16</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -568,7 +402,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>21</FileNumber>
|
||||
<FileNumber>17</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -580,7 +414,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>22</FileNumber>
|
||||
<FileNumber>18</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -592,7 +426,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>23</FileNumber>
|
||||
<FileNumber>19</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -604,7 +438,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>24</FileNumber>
|
||||
<FileNumber>20</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -616,7 +450,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>25</FileNumber>
|
||||
<FileNumber>21</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -628,19 +462,19 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>26</FileNumber>
|
||||
<FileNumber>22</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<bDave2>0</bDave2>
|
||||
<PathWithFileName>..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_iwdg.c</PathWithFileName>
|
||||
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c</PathWithFileName>
|
||||
<FilenameWithoutPath>stm32f1xx_hal_iwdg.c</FilenameWithoutPath>
|
||||
<RteFlg>0</RteFlg>
|
||||
<bShared>0</bShared>
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>27</FileNumber>
|
||||
<FileNumber>23</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -652,7 +486,7 @@
|
||||
</File>
|
||||
<File>
|
||||
<GroupNumber>3</GroupNumber>
|
||||
<FileNumber>28</FileNumber>
|
||||
<FileNumber>24</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
@ -672,7 +506,7 @@
|
||||
<RteFlg>0</RteFlg>
|
||||
<File>
|
||||
<GroupNumber>4</GroupNumber>
|
||||
<FileNumber>29</FileNumber>
|
||||
<FileNumber>25</FileNumber>
|
||||
<FileType>1</FileType>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
@ -28,5 +28,4 @@ uksvep_2_2_v1/can.o: ..\Core\Src\can.c ..\Core\Inc\can.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_iwdg.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_pwr.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h \
|
||||
..\Core\Inc\gpio.h ..\Core\Inc\message.h ..\Core\Inc\struc.h
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@ -1,2 +0,0 @@
|
||||
uksvep_2_2_v1/crc16.o: ..\Core\Src\crc16.c ..\Core\Inc\crc16.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h
|
||||
Binary file not shown.
Binary file not shown.
@ -1,37 +0,0 @@
|
||||
uksvep_2_2_v1\ecan.o: ..\Core\Src\ecan.c
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/stm32f1xx_hal_conf.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/CMSIS/Include/core_cm3.h
|
||||
uksvep_2_2_v1\ecan.o: d:\Keil\ARM\ARMCC\Bin\..\include\stdint.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/CMSIS/Include/cmsis_version.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
|
||||
uksvep_2_2_v1\ecan.o: d:\Keil\ARM\ARMCC\Bin\..\include\stddef.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h
|
||||
uksvep_2_2_v1\ecan.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/gpio.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/main.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/struc.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/package.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/ecan.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/message.h
|
||||
uksvep_2_2_v1\ecan.o: ../Core/Inc/lampa.h
|
||||
uksvep_2_2_v1\ecan.o: d:\Keil\ARM\ARMCC\Bin\..\include\stdbool.h
|
||||
Binary file not shown.
Binary file not shown.
@ -1,31 +0,0 @@
|
||||
uksvep_2_2_v1/eeprom.o: ..\Core\Src\eeprom.c ..\Core\Inc\eeprom.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal.h \
|
||||
..\Core\Inc\stm32f1xx_hal_conf.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_def.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f1xx.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f103xe.h \
|
||||
..\Drivers\CMSIS\Include\core_cm3.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_version.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_compiler.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_armclang.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\arm_compat.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\arm_acle.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\system_stm32f1xx.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stddef.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_exti.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_can.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_cortex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_iwdg.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_pwr.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,33 +0,0 @@
|
||||
uksvep_2_2_v1/lampa.o: ..\Core\Src\lampa.c ..\Core\Inc\gpio.h \
|
||||
..\Core\Inc\main.h ..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal.h \
|
||||
..\Core\Inc\stm32f1xx_hal_conf.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_def.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f1xx.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f103xe.h \
|
||||
..\Drivers\CMSIS\Include\core_cm3.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_version.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_compiler.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_armclang.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\arm_compat.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\arm_acle.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\system_stm32f1xx.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stddef.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_exti.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_can.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_cortex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_iwdg.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_pwr.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h \
|
||||
..\Core\Inc\lampa.h C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdbool.h \
|
||||
..\Core\Inc\struc.h ..\Core\Inc\message.h ..\Core\Inc\package.h
|
||||
Binary file not shown.
Binary file not shown.
@ -30,6 +30,4 @@ uksvep_2_2_v1/main.o: ..\Core\Src\main.c ..\Core\Inc\main.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h \
|
||||
..\Core\Inc\can.h ..\Core\Inc\iwdg.h ..\Core\Inc\tim.h \
|
||||
..\Core\Inc\gpio.h ..\Core\Inc\package.h ..\Core\Inc\message.h \
|
||||
..\Core\Inc\struc.h ..\Core\Inc\lampa.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdbool.h
|
||||
..\Core\Inc\gpio.h
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@ -1,33 +0,0 @@
|
||||
uksvep_2_2_v1/message.o: ..\Core\Src\message.c \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal.h \
|
||||
..\Core\Inc\stm32f1xx_hal_conf.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_def.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f1xx.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\stm32f103xe.h \
|
||||
..\Drivers\CMSIS\Include\core_cm3.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdint.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_version.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_compiler.h \
|
||||
..\Drivers\CMSIS\Include\cmsis_armclang.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\arm_compat.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\arm_acle.h \
|
||||
..\Drivers\CMSIS\Device\ST\STM32F1xx\Include\system_stm32f1xx.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h \
|
||||
C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stddef.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_rcc_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_gpio_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_exti.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_dma_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_can.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_cortex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_flash_ex.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_iwdg.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_pwr.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h \
|
||||
..\Core\Inc\struc.h ..\Core\Inc\crc16.h ..\Core\Inc\package.h \
|
||||
..\Core\Inc\message.h ..\Core\Inc\eeprom.h
|
||||
Binary file not shown.
@ -1 +0,0 @@
|
||||
uksvep_2_2_v1\startup_stm32f103xe.o: startup_stm32f103xe.s
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,30 +0,0 @@
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Core/Inc/stm32f1xx_hal_conf.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/CMSIS/Include/core_cm3.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: d:\Keil\ARM\ARMCC\Bin\..\include\stdint.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/CMSIS/Include/cmsis_version.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: d:\Keil\ARM\ARMCC\Bin\..\include\stddef.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h
|
||||
Binary file not shown.
Binary file not shown.
@ -1,30 +0,0 @@
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Core/Inc/stm32f1xx_hal_conf.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/CMSIS/Include/core_cm3.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: d:\Keil\ARM\ARMCC\Bin\..\include\stdint.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/CMSIS/Include/cmsis_version.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: d:\Keil\ARM\ARMCC\Bin\..\include\stddef.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_adc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,30 +0,0 @@
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Core/Inc/stm32f1xx_hal_conf.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/core_cm3.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: d:\Keil\ARM\ARMCC\Bin\..\include\stdint.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/cmsis_version.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: d:\Keil\ARM\ARMCC\Bin\..\include\stddef.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_can.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
|
||||
uksvep_2_2_v1\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -28,5 +28,4 @@ uksvep_2_2_v1/tim.o: ..\Core\Src\tim.c ..\Core\Inc\tim.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_iwdg.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_pwr.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim.h \
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h \
|
||||
..\Core\Inc\lampa.h C:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdbool.h
|
||||
..\Drivers\STM32F1xx_HAL_Driver\Inc\stm32f1xx_hal_tim_ex.h
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@ -27,16 +27,33 @@ Project File Date: 08/22/2025
|
||||
<h2>Output:</h2>
|
||||
*** Using Compiler 'V6.19', folder: 'C:\Keil_v5\ARM\ARMCLANG\Bin'
|
||||
Build target 'uksvep_2_2_v1'
|
||||
compiling lampa.c...
|
||||
compiling iwdg.c...
|
||||
compiling gpio.c...
|
||||
compiling can.c...
|
||||
compiling main.c...
|
||||
compiling iwdg.c...
|
||||
assembling startup_stm32f103xe.s...
|
||||
compiling tim.c...
|
||||
compiling stm32f1xx_hal_msp.c...
|
||||
compiling stm32f1xx_it.c...
|
||||
compiling stm32f1xx_hal_msp.c...
|
||||
compiling stm32f1xx_hal_timebase_tim.c...
|
||||
compiling stm32f1xx_hal_gpio_ex.c...
|
||||
compiling stm32f1xx_hal.c...
|
||||
compiling stm32f1xx_hal_rcc_ex.c...
|
||||
compiling stm32f1xx_hal_gpio.c...
|
||||
compiling stm32f1xx_hal_rcc.c...
|
||||
compiling stm32f1xx_hal_can.c...
|
||||
compiling stm32f1xx_hal_pwr.c...
|
||||
compiling stm32f1xx_hal_cortex.c...
|
||||
compiling stm32f1xx_hal_dma.c...
|
||||
compiling stm32f1xx_hal_flash.c...
|
||||
compiling stm32f1xx_hal_flash_ex.c...
|
||||
compiling stm32f1xx_hal_iwdg.c...
|
||||
compiling stm32f1xx_hal_exti.c...
|
||||
compiling system_stm32f1xx.c...
|
||||
compiling stm32f1xx_hal_tim_ex.c...
|
||||
compiling stm32f1xx_hal_tim.c...
|
||||
linking...
|
||||
Program Size: Code=20880 RO-data=380 RW-data=20 ZI-data=3932
|
||||
Program Size: Code=9984 RO-data=380 RW-data=12 ZI-data=2348
|
||||
FromELF: creating hex file...
|
||||
"uksvep_2_2_v1\uksvep_2_2_v1.axf" - 0 Error(s), 0 Warning(s).
|
||||
|
||||
@ -62,7 +79,7 @@ Package Vendor: Keil
|
||||
|
||||
* Component: ARM::CMSIS:CORE:5.6.0
|
||||
Include file: CMSIS/Core/Include/tz_context.h
|
||||
Build Time Elapsed: 00:00:01
|
||||
Build Time Elapsed: 00:00:02
|
||||
</pre>
|
||||
</body>
|
||||
</html>
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user