через дефайн убран поток приложения мк

App_Wrapper/main.c

@@ -152,7 +152,7 @@ void Periph_reInit(void)
   * @brief  The application entry point.
   * @retval int
   */
-int main(void)
+int main_init(void)
  {
   /* USER CODE BEGIN 1 */
 	__HAL_DBGMCU_FREEZE_TIM1();
@@ -212,14 +212,14 @@ int main(void)
 //	MODBUS_Transmit_IT(&hmodbus1, &MODBUS_MSG);		
 	//RS_Receive_IT(&hmodbus1, &MODBUS_MSG);
 
-  while (1)
-  {		
-    /* USER CODE END WHILE */		
-		Periph_reInit();
-    /* USER CODE BEGIN 3 */
-//		HAL_Delay(200);
-//		MB_Toogle_Coil_Local(&GPIOD->ODR, COIL_GPIOD_LED3);
-  }
+//  while (1)
+//  {		
+//    /* USER CODE END WHILE */		
+//		Periph_reInit();
+//    /* USER CODE BEGIN 3 */
+////		HAL_Delay(200);
+////		MB_Toogle_Coil_Local(&GPIOD->ODR, COIL_GPIOD_LED3);
+//  }
   /* USER CODE END 3 */
 }
 

MCU_STM32F4xx_Matlab/STM32F4xx_SIMULINK/stm32f4xx_matlab_tim.c

@@ -40,7 +40,6 @@ void TIM_Simulation(TIM_TypeDef *TIMx, struct TIM_Sim *TIMS)
             Channels_Simulation(TIMx, TIMS); // CaptureCompare and PWM channels simulation
             break;
 
-
         // включение слейв таймера по ивенту
         case(TIM_SLAVEMODE_TRIGGER): // SLAVE MODE: TRIGGER MODE
             Slave_Mode_Check_Source(TIMx, TIMS);
@@ -83,8 +82,23 @@ void Overflow_Check(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS)
     if ((TIMx->CR1 & TIM_CR1_UDIS) == 0) // UPDATE enable
     {
         if ((TIMx->CR1 & TIM_CR1_ARPE) == 0)  TIMS->RELOAD = TIMx->ARR; // PRELOAD disable - update ARR every itteration
+
         if (TIMS->tx_cnt > TIMS->RELOAD || TIMS->tx_cnt < 0) // OVERFLOW
         {
+
+            switch (TIMx->CR1 & TIM_CR1_CMS)
+            {
+            case TIM_COUNTERMODE_CENTERALIGNED1:
+            case TIM_COUNTERMODE_CENTERALIGNED2:
+            case TIM_COUNTERMODE_CENTERALIGNED3:
+                TIMx->CR1 ^= TIM_CR1_DIR;
+
+                if (TIMx->DIER & TIM_DIER_UIE) // if update interrupt enable
+                    call_IRQHandller(TIMx); // call HANDLER
+                break;
+
+            // default counting
+            default:
                 TIMS->RELOAD = TIMx->ARR; // RELOAD ARR
 
                 if (TIMS->tx_cnt > TIMx->ARR) // reset COUNTER
@@ -92,8 +106,10 @@ void Overflow_Check(TIM_TypeDef* TIMx, struct TIM_Sim* TIMS)
                 else if (TIMS->tx_cnt < 0)
                     TIMS->tx_cnt = TIMx->ARR;
 
-            if(TIMx->DIER & TIM_DIER_UIE) // if update interrupt enable
+                if (TIMx->DIER & TIM_DIER_UIE) // if update interrupt enable
                     call_IRQHandller(TIMx); // call HANDLER
+                    break;
+            }
         }
     }
 }

MCU_Wrapper/mcu_wrapper.c

@@ -21,6 +21,7 @@ SIM__MCUHandleTypeDef hmcu;         ///< Хендл для управления
 //-------------------------------------------------------------//
 //-----------------CONTROLLER SIMULATE FUNCTIONS---------------//
 /* THREAD FOR MCU APP */
+#ifdef RUN_APP_MAIN_FUNC_THREAD
 /**
   * @brief      Главная функция приложения МК.
   * @details    Функция с которой начинается выполнение кода МК. Выход из данной функции происходит только в конце симуляции @ref mdlTerminate
@@ -35,6 +36,7 @@ unsigned __stdcall MCU_App_Thread(void) {
     return 0;   // end thread
     // note: this return will reached only at the end of simulation, when all whiles will be skipped due to @ref sim_while
 }
+#endif //RUN_APP_MAIN_FUNC_THREAD
 /* SIMULATE MCU FOR ONE SIMULATION STEP */
 /**
   * @brief      Симуляция МК на один такт симуляции.
@@ -56,11 +58,15 @@ void MCU_Step_Simulation(SimStruct* S, time_T time)
 
     MCU_Periph_Simulation(); // simulate peripheral
 
+    extern void Periph_reInit(void);
+    Periph_reInit();
+#ifdef RUN_APP_MAIN_FUNC_THREAD
     ResumeThread(hmcu.hMCUThread);
     for (int i = DEKSTOP_CYCLES_FOR_MCU_APP; i > 0; i--)
     {
     }
     SuspendThread(hmcu.hMCUThread);
+#endif //RUN_APP_MAIN_FUNC_THREAD
 
     MCU_writeOutputs(S); // запись портов (по факту запись в буфер. запись в порты в mdlOutputs)
 }
@@ -142,13 +148,15 @@ void SIM_writeOutputs(SimStruct* S)
   */
 void SIM_Initialize_Simulation(void)
 {
+#ifdef RUN_APP_MAIN_FUNC_THREAD
     // инициализация потока, который будет выполнять код МК
     hmcu.hMCUThread = (HANDLE)CreateThread(NULL, 0, MCU_App_Thread, 0, CREATE_SUSPENDED, &hmcu.idMCUThread);
-
+#endif //RUN_APP_MAIN_FUNC_THREAD
 
     /* user initialization */
     Initialize_Periph_Sim();
-
+    extern int main_init(void);
+    main_init();
     /* wrapper initialization */
     hmcu.SystemClock_step = MCU_CORE_CLOCK * hmcu.SIM_Sample_Time;   // set system clock step
 }

MCU_Wrapper/mcu_wrapper_conf.h

@@ -21,8 +21,8 @@
 - для S-Function		"simstruc.h"
 - для потоков			<process.h>
 **************************************************************************/
-#ifndef _CONTROLLER_H_
-#define _CONTROLLER_H_
+#ifndef _WRAPPER_CONF_H_
+#define _WRAPPER_CONF_H_
 
 // Includes
 #include "stm32f4xx_matlab_conf.h"  // For stm simulate functions
@@ -44,12 +44,13 @@
     */
 
 // Parametrs of MCU simulator
-#define CREATE_SUSPENDED                0x00000004  ///< define from WinBase.h. We dont wanna include "Windows.h" or smth like this, because of HAL there are a lot of redefine errors.
-
+//#define RUN_APP_MAIN_FUNC_THREAD                    ///< Enable using thread for MCU main() func
 #define DEKSTOP_CYCLES_FOR_MCU_APP      0xFF      ///< number of for() cycles after which MCU thread would be suspended 
+#define MCU_CORE_CLOCK                  150000000   ///< MCU clock rate for simulation
+
+
 #define PORT_WIDTH                      16          ///< width of one port
 #define PORT_NUMB                       3           ///< amount of ports
-
 // Parameters of S_Function
 #define NPARAMS                 1                           ///< number of input parametrs (only Ts)
 #define IN_PORT_WIDTH           (9)                         ///< width of input ports
@@ -69,6 +70,14 @@
   * @{
   */
 
+// Fixed parameters(?) of S_Function
+#define NPARAMS                 1                               ///< number of input parametrs (only Ts)
+#define DISC_STATES_WIDTH       OUT_PORT_WIDTH*OUT_PORT_NUMB    ///< width of discrete states array (outbup buffer)
+/**
+  * @brief      Define for creating thread in suspended state.
+  * @details    Define from WinBase.h. We dont wanna include "Windows.h" or smth like this, because of HAL there are a lot of redefine errors.
+  */
+#define CREATE_SUSPENDED                0x00000004
 typedef void* HANDLE; ///< MCU handle typedef
 
 /**
@@ -92,6 +101,7 @@ extern SIM__MCUHandleTypeDef hmcu;              // extern для видимос
 
 //-------------------------------------------------------------//
 //------------------  SIMULINK WHILE DEFINES  -----------------//
+#ifdef RUN_APP_MAIN_FUNC_THREAD
 /* DEFINE TO WHILE WITH SIMULINK WHILE */
 /**
   * @brief      Redefine C while statement with sim_while() macro.
@@ -99,7 +109,7 @@ extern SIM__MCUHandleTypeDef hmcu;              // extern для видимос
   * @details    Это while который будет использоваться в симулинке @ref sim_while для подробностей.
   */
 #define while(_expression_)                          sim_while(_expression_) 
-
+#endif
 /* SIMULINK WHILE */
 /**
   * @brief      While statement for emulate MCU code in Simulink.
@@ -152,7 +162,7 @@ void SIM_writeOutput(SimStruct* S);
 /** MCU_WRAPPER
     * @}
     */
-#endif // _CONTROLLER_H_
+#endif // _WRAPPER_CONF_H_
 
 
 //-------------------------------------------------------------//