Всякие тесты неинтересные

.gitmodules

@@ -0,0 +1,4 @@
+[submodule "PCB_Charger"]
+	path = PCB_Charger
+	url = https://git.rd12.ru/Razvalyaev/Charger.git
+	branch = master

OpticalChannelTester/App.cpp

@@ -19,7 +19,7 @@ constexpr uint8_t MENU_OPTICAL_CALIBRATION_ITEM = 7;
 const char *uiFailName(FailReason reason);
 
 const char *appStateName(AppState state) {
-  static const char *names[] = {"IDLE", "MENU", "BOARD_TEST", "SOLO_MEASURE", "SOLO_DRIVER", "MASTER_DISCOVER",
+  static const char *names[] = {"IDLE", "MENU", "BOARD_TEST", "PWM_OUTPUT", "SOLO_MEASURE", "SOLO_DRIVER", "MASTER_DISCOVER",
     "MASTER_WAIT_READY", "MASTER_WAIT_RESULT", "MASTER_FINALIZE", "SLAVE_READY", "SLAVE_WAIT_START",
     "SLAVE_MEASURE", "SLAVE_WAIT_ACK", "FINISHED"};
   const uint8_t index = static_cast<uint8_t>(state);
@@ -250,9 +250,12 @@ uint8_t cycleIndex(uint8_t value, uint8_t first, uint8_t last, int direction) {
   return value <= first ? last : static_cast<uint8_t>(value - 1U);
 }
 
-uint8_t nextMenuItem(uint8_t current, TestGroup group) {
+uint8_t nextMenuItem(uint8_t current, TestGroup group, TestKind kind) {
   if (group == TestGroup::BOARD)
     return current == 0U ? MENU_OPTICAL_CALIBRATION_ITEM : 0U;
+  if (kind == TestKind::PWM_OUTPUT)
+    return current == 0U ? 1U : current == 1U ? 2U
+      : current == 2U ? MENU_OPTICAL_CALIBRATION_ITEM : 0U;
   return current >= MENU_OPTICAL_CALIBRATION_ITEM ? 0U
     : static_cast<uint8_t>(current + 1U);
 }
@@ -356,6 +359,12 @@ void App::update() {
     }
     return;
   }
+  if (state_ == AppState::PWM_OUTPUT) {
+    if (startEvent == ButtonEvent::LONG) stopPwmOutput();
+    else if (modeEvent != ButtonEvent::NONE)
+      Log::event("ACTION", "MODE ignored while PWM output is active");
+    return;
+  }
   if (state_ != AppState::IDLE && state_ != AppState::MENU && state_ != AppState::FINISHED &&
       startEvent == ButtonEvent::LONG) { abortTest(); return; }
   if (state_ != AppState::IDLE && state_ != AppState::MENU && state_ != AppState::FINISHED &&
@@ -399,7 +408,8 @@ void App::update() {
     if (modeEvent == ButtonEvent::SHORT) {
       leaveOpticalCalibration();
       menuItem_ = nextMenuItem(menuItem_,
-        static_cast<TestGroup>(settings_.testGroup));
+        static_cast<TestGroup>(settings_.testGroup),
+        static_cast<TestKind>(settings_.testKind));
       Log::printf("ACTION", "menu item selected index=%u", menuItem_);
       showMenu();
     }
@@ -529,12 +539,12 @@ void App::printSerialHelp() {
   Serial.println("  set group optics|board");
   Serial.println("  set boardtest adc|pwm|rx");
   Serial.println("  set role solo|master|slave");
-  Serial.println("  set test optical|driver");
+  Serial.println("  set test optical|driver|pwm   (driver/pwm: SOLO only)");
-  Serial.println("  set frequency 500|1000|2000|5000|10000|25000");
+  Serial.println("  set frequency 500|1000|2000|5000|10000");
-  Serial.println("  set max 2000|5000|10000|20000|50000|100000|200000|500000");
+  Serial.println("  set max 2000|5000|10000|50000|100000|500000 (PWM pulse in SOLO PWM)");
   Serial.println("  set min 250|500|1000|2000|5000|10000|50000");
   Serial.println("  set accuracy 1|2|5|10");
-  Serial.println("  set time 100|250|500|1000|2000|5000   (ms)");
+  Serial.println("  set time 100|250|500|1000|2000|5000|60000   (ms)");
   Serial.println("  set light HH|HL|LH|LL   (DRIVER only)");
 }
 
@@ -605,6 +615,9 @@ void App::handleSerialCommand(char *line) {
     else if (state_ == AppState::BOARD_TEST) {
       Serial.println("OK board test stopped");
       stopBoardTest();
+    } else if (state_ == AppState::PWM_OUTPUT) {
+      Serial.println("OK PWM output stopped");
+      stopPwmOutput();
     } else if (state_ == AppState::MENU) {
       leaveOpticalCalibration();
       state_ = AppState::IDLE; showIdle(); Serial.println("OK menu closed");
@@ -659,6 +672,9 @@ void App::handleSerialCommand(char *line) {
     else if (!strcmp(value, "driver") && !TARGET_IS_C3 &&
              static_cast<Role>(settings_.role) == Role::SOLO) {
       settings_.testKind = static_cast<uint8_t>(TestKind::DRIVER); accepted = true;
+    } else if (!strcmp(value, "pwm") &&
+               static_cast<Role>(settings_.role) == Role::SOLO) {
+      settings_.testKind = static_cast<uint8_t>(TestKind::PWM_OUTPUT); accepted = true;
     }
   } else if ((!strcmp(name, "frequency") || !strcmp(name, "freq")) && parseUnsigned(value, numeric)) {
     const int index = optionIndex(PWM_FREQUENCY_OPTIONS_HZ, numeric);
@@ -705,6 +721,8 @@ void App::cycleRunMode() {
   const TestKind kind = static_cast<TestKind>(settings_.testKind);
   if (role == Role::SOLO && kind == TestKind::OPTICAL && !TARGET_IS_C3) {
     settings_.testKind = static_cast<uint8_t>(TestKind::DRIVER);
+  } else if (role == Role::SOLO && kind != TestKind::PWM_OUTPUT) {
+    settings_.testKind = static_cast<uint8_t>(TestKind::PWM_OUTPUT);
   } else if (role == Role::SOLO) {
     settings_.role = static_cast<uint8_t>(Role::MASTER);
     settings_.testKind = static_cast<uint8_t>(TestKind::OPTICAL);
@@ -725,11 +743,12 @@ void App::sanitizeRange() {
     settings_.boardTest = static_cast<uint8_t>(defaultBoardTest());
   if (settings_.role > static_cast<uint8_t>(Role::SLAVE))
     settings_.role = static_cast<uint8_t>(Role::SOLO);
-  if (settings_.testKind > static_cast<uint8_t>(TestKind::DRIVER))
+  if (settings_.testKind > static_cast<uint8_t>(TestKind::PWM_OUTPUT))
     settings_.testKind = static_cast<uint8_t>(TestKind::OPTICAL);
   if (settings_.lightCode > static_cast<uint8_t>(LightCode::LL))
     settings_.lightCode = static_cast<uint8_t>(LightCode::HH);
-  if (settings_.role != static_cast<uint8_t>(Role::SOLO) ||
+  if ((settings_.role != static_cast<uint8_t>(Role::SOLO) &&
+       settings_.testKind != static_cast<uint8_t>(TestKind::OPTICAL)) ||
       (TARGET_IS_C3 && settings_.testKind == static_cast<uint8_t>(TestKind::DRIVER)))
     settings_.testKind = static_cast<uint8_t>(TestKind::OPTICAL);
   settings_.frequencyIndex %= countOf(PWM_FREQUENCY_OPTIONS_HZ);
@@ -760,8 +779,8 @@ void App::changeMenu(int d) {
   } else if (menuItem_ == 2) {
     const uint8_t last = lastValidMaxPulseIndex(
       PWM_FREQUENCY_OPTIONS_HZ[settings_.frequencyIndex]);
-    const uint8_t first = firstMaxPulseIndexAtLeast(
+    const uint8_t first = static_cast<TestKind>(settings_.testKind) == TestKind::PWM_OUTPUT
-      MIN_PULSE_OPTIONS_NS[settings_.minPulseIndex], last);
+      ? 0U : firstMaxPulseIndexAtLeast(MIN_PULSE_OPTIONS_NS[settings_.minPulseIndex], last);
     settings_.maxPulseIndex = cycleIndex(settings_.maxPulseIndex,
       first, last, d);
   } else if (menuItem_ == 3) {
@@ -811,7 +830,8 @@ void App::showMenu() {
       break;
     case 2:
       Display::formatPulse(params_.maxPulseNs, value, sizeof(value));
-      label = UiText::MENU_MAX_PULSE;
+      label = static_cast<TestKind>(settings_.testKind) == TestKind::PWM_OUTPUT
+        ? UiText::MENU_PWM_PULSE : UiText::MENU_MAX_PULSE;
       break;
     case 3:
       Display::formatPulse(params_.minPulseNs, value, sizeof(value));
@@ -847,7 +867,8 @@ void App::showMenu() {
     default: return;
   }
   formatMenuLine(label, value, one, sizeof(one));
-  if (static_cast<TestGroup>(settings_.testGroup) == TestGroup::BOARD)
+  if (static_cast<TestGroup>(settings_.testGroup) == TestGroup::BOARD ||
+      static_cast<TestKind>(settings_.testKind) == TestKind::PWM_OUTPUT)
     snprintf(total, sizeof(total), "%s", UiText::BOARD_READY);
   else
     formatMenuLine(UiText::MENU_TOTAL_TIME, all, total, sizeof(total));
@@ -900,6 +921,10 @@ void App::startTest() {
     startBoardTest();
     return;
   }
+  if (static_cast<TestKind>(settings_.testKind) == TestKind::PWM_OUTPUT) {
+    startPwmOutput();
+    return;
+  }
   params_ = store_.params(settings_); stageCount_ = pulseWidthPointCount(params_.maxPulseNs, params_.minPulseNs);
   stageIndex_ = 0; requestedHz_ = params_.frequencyHz; requestedPulseNs_ = 0; pendingReason_ = FailReason::NONE;
   havePeer_ = false; lastHeartbeatMs_ = 0; lastPeerSeenMs_ = 0;
@@ -1019,6 +1044,37 @@ void App::stopBoardTest() {
   showIdle();
 }
 
+void App::startPwmOutput() {
+  params_ = store_.params(settings_);
+  requestedHz_ = params_.frequencyHz;
+  requestedPulseNs_ = params_.maxPulseNs;
+  stageIndex_ = 0;
+  stageCount_ = 1;
+  pwm_.configureActiveLight(true);
+  if (!pwm_.start(requestedHz_, requestedPulseNs_, actual_)) {
+    Log::printf("PWM", "start failed: frequency=%luHz pulse=%luns",
+      requestedHz_, requestedPulseNs_);
+    finish(false, FailReason::RESOLUTION);
+    return;
+  }
+  state_ = AppState::PWM_OUTPUT;
+  char target[32], one[48];
+  formatTarget(actual_.actualHz, actual_.actualPulseNs, target, sizeof(target));
+  snprintf(one, sizeof(one), "%s: %s", uiTestName(TestKind::PWM_OUTPUT), target);
+  display_.show(one, UiText::BOARD_STOP);
+  Log::printf("PWM", "continuous output GPIO=%u requested=%luHz/%luns actual=%luHz/%luns duty=%.2f%%",
+    GPIO_PWM, requestedHz_, requestedPulseNs_, actual_.actualHz,
+    actual_.actualPulseNs, actual_.actualDutyPct);
+}
+
+void App::stopPwmOutput() {
+  Log::event("PWM", "continuous output stopped");
+  pwm_.stop();
+  state_ = AppState::IDLE;
+  setActivePerformance(false);
+  showIdle();
+}
+
 bool App::armSlave(bool preserveDisplay) {
   setActivePerformance(false);
   pwm_.stop();
@@ -1652,6 +1708,11 @@ void App::printConfiguration() {
   Serial.printf("MAC=%02X:%02X:%02X:%02X:%02X:%02X\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
   Serial.printf("GPIO PWM=%u RX=%u START=%u MODE=%u SDA=%u SCL=%u\n", GPIO_PWM, GPIO_RX,
     GPIO_BUTTON_START, GPIO_BUTTON_MODE, GPIO_SDA, GPIO_SCL);
+  if (static_cast<TestKind>(settings_.testKind) == TestKind::PWM_OUTPUT) {
+    Serial.printf("Continuous PWM output %lu Hz, pulse %lu ns; RX unused\n",
+      params_.frequencyHz, params_.maxPulseNs);
+    return;
+  }
   if (static_cast<TestKind>(settings_.testKind) == TestKind::DRIVER) {
     const char *code = lightCodeName(static_cast<LightCode>(settings_.lightCode));
     Serial.printf("Test %lu Hz, pulse %lu..%lu ns, accuracy %.2f%%, %lums, TX light=%c RX active light=%c\n",

OpticalChannelTester/App.h

@@ -9,7 +9,7 @@
 #include "SettingsStore.h"
 
 enum class AppState : uint8_t {
-  IDLE, MENU, BOARD_TEST, SOLO_MEASURE, SOLO_DRIVER, MASTER_DISCOVER, MASTER_WAIT_READY,
+  IDLE, MENU, BOARD_TEST, PWM_OUTPUT, SOLO_MEASURE, SOLO_DRIVER, MASTER_DISCOVER, MASTER_WAIT_READY,
   MASTER_WAIT_RESULT, MASTER_FINALIZE, SLAVE_READY, SLAVE_WAIT_START, SLAVE_MEASURE,
   SLAVE_WAIT_ACK, FINISHED
 };
@@ -33,6 +33,8 @@ class App {
   void startBoardTest();
   void updateBoardTest(uint32_t now);
   void stopBoardTest();
+  void startPwmOutput();
+  void stopPwmOutput();
   bool armSlave(bool preserveDisplay = false);
   bool prepareStage(bool showProgress = true);
   bool startLocalMeasurement(float hz, float duty);

OpticalChannelTester/Config.h

@@ -2,9 +2,13 @@
 
 #include <Arduino.h>
 
+// Uncomment to build the standalone PWM/RX pulse probe instead of the tester UI.
+#define SIGNAL_PROBE_FIRMWARE
+
 // ------------------------- Hardware configuration -------------------------
 // Enabled for the hand-wired prototype. Comment out for the production PCB.
 // Both profiles map S3 signals by physical header position with 5V/GND aligned.
+
 #define MAKETKA
 
 // Select exactly one populated receiver circuit. Use

OpticalChannelTester/Config_Text.h

@@ -18,7 +18,7 @@ constexpr const char *ROLE_NAMES[] = {
 };
 
 constexpr const char *TEST_NAMES[] = {
-  "ОПТИКА", "ДРАЙВЕР"
+  "ОПТИКА", "ДРАЙВЕР", "ШИМ"
 };
 
 constexpr const char *TEST_GROUP_NAMES[] = {
@@ -54,6 +54,7 @@ constexpr const char *START_RUN = "ГОТОВ К ЗАПУСКУ";
 constexpr const char *MENU_FREQUENCY = "ЧАСТОТА ШИМ:";
 constexpr const char *MENU_TEST_GROUP = "ГРУППА ТЕСТОВ:";
 constexpr const char *MENU_MAX_PULSE = "МАКС. ИМПУЛЬС:";
+constexpr const char *MENU_PWM_PULSE = "ИМПУЛЬС ШИМ:";
 constexpr const char *MENU_MIN_PULSE = "МИН. ИМПУЛЬС:";
 constexpr const char *MENU_ACCURACY = "ТОЧНОСТЬ:";
 constexpr const char *MENU_TEST_TIME = "ВРЕМЯ ВЫБОРКИ:";
@@ -97,7 +98,7 @@ constexpr const char *ROLE_NAMES[] = {
 };
 
 constexpr const char *TEST_NAMES[] = {
-  "OPTICAL", "DRIVER"
+  "OPTICAL", "DRIVER", "PWM"
 };
 
 constexpr const char *TEST_GROUP_NAMES[] = {
@@ -133,6 +134,7 @@ constexpr const char *START_RUN = "READY TO START";
 constexpr const char *MENU_FREQUENCY = "PWM FREQUENCY:";
 constexpr const char *MENU_TEST_GROUP = "TEST GROUP:";
 constexpr const char *MENU_MAX_PULSE = "MAX PULSE:";
+constexpr const char *MENU_PWM_PULSE = "PWM PULSE:";
 constexpr const char *MENU_MIN_PULSE = "MIN PULSE:";
 constexpr const char *MENU_ACCURACY = "ACCURACY:";
 constexpr const char *MENU_TEST_TIME = "TEST TIME:";

OpticalChannelTester/Core.cpp

@@ -16,9 +16,9 @@ const char *testGroupName(TestGroup group) {
 }
 
 const char *testKindName(TestKind kind) {
-  static const char *names[] = {"OPTICAL", "DRIVER"};
+  static const char *names[] = {"OPTICAL", "DRIVER", "PWM OUTPUT"};
   const uint8_t i = static_cast<uint8_t>(kind);
-  return i < 2 ? names[i] : "?";
+  return i < 3 ? names[i] : "?";
 }
 
 const char *boardTestName(BoardTest test) {

OpticalChannelTester/Core.h

@@ -5,7 +5,7 @@
 
 enum class Role : uint8_t { SOLO, MASTER, SLAVE };
 enum class TestGroup : uint8_t { OPTICS, BOARD };
-enum class TestKind : uint8_t { OPTICAL, DRIVER };
+enum class TestKind : uint8_t { OPTICAL, DRIVER, PWM_OUTPUT };
 enum class BoardTest : uint8_t { ADC, PWM_OUTPUT, RX_INPUT };
 enum class LightCode : uint8_t { HH, HL, LH, LL };
 enum class FailReason : uint8_t {

OpticalChannelTester/DriverTest.cpp

@@ -8,17 +8,29 @@
 #include <esp_task_wdt.h>
 #include <esp_timer.h>
 #include <esp32-hal-cpu.h>
-#include <soc/gpio_struct.h>
+#include <soc/gpio_reg.h>
+#include <soc/soc.h>
 #include <string.h>
+#if CONFIG_IDF_TARGET_ESP32C3
+#include <riscv/rv_utils.h>
+#endif
 
 static inline uint32_t IRAM_ATTR maskAllInterrupts() {
+#if CONFIG_IDF_TARGET_ESP32C3
+  return RV_CLEAR_CSR(mstatus, MSTATUS_MIE);
+#else
   uint32_t state;
   asm volatile("rsil %0, 15" : "=a"(state) :: "memory");
   return state;
+#endif
 }
 
 static inline void IRAM_ATTR restoreInterrupts(uint32_t state) {
+#if CONFIG_IDF_TARGET_ESP32C3
+  RV_SET_CSR(mstatus, state & MSTATUS_MIE);
+#else
   asm volatile("wsr %0, ps\nrsync" :: "a"(state) : "memory");
+#endif
 }
 
 void DriverEdgeStats::reset() {
@@ -193,7 +205,7 @@ void IRAM_ATTR DriverTest::pollTaskLoop() {
   constexpr uint32_t PIN_MASK = (1UL << GPIO_PWM) | (1UL << GPIO_RX);
   for (;;) {
     ulTaskNotifyTake(pdTRUE, portMAX_DELAY);
-    uint32_t levels = GPIO.in & PIN_MASK;
+    uint32_t levels = REG_READ(GPIO_IN_REG) & PIN_MASK;
     uint32_t nextStart = 0;
     uint32_t windowEnd = 0;
     uint32_t lastTxStart = 0;
@@ -205,7 +217,7 @@ void IRAM_ATTR DriverTest::pollTaskLoop() {
     uint32_t interruptState = 0;
 
     auto sampleOnce = [&]() {
-      const uint32_t current = GPIO.in & PIN_MASK;
+      const uint32_t current = REG_READ(GPIO_IN_REG) & PIN_MASK;
       if (current == levels) return;
       const uint32_t now = esp_cpu_get_cycle_count();
       const uint32_t changed = current ^ levels;
@@ -636,8 +648,7 @@ void IRAM_ATTR DriverTest::recordRaw(uint32_t tick, bool rising,
     return;
   }
   ring_[write] = {tick, rising, source};
-  asm volatile("memw" ::: "memory");
+  __atomic_store_n(&ringWrite_, next, __ATOMIC_RELEASE);
-  ringWrite_ = next;
 }
 
 size_t DriverTest::readRaw(TimedEvent *events, size_t capacity,

OpticalChannelTester/OpticalChannelTester.ino

@@ -1,5 +1,11 @@
+#include "Config.h"
+#ifdef SIGNAL_PROBE_FIRMWARE
+#include "SignalProbe.h"
+SignalProbe app;
+#else
 #include "App.h"
 App app;
+#endif
 
 void setup() { app.begin(); }
 void loop() { app.update(); }

OpticalChannelTester/Receiver.cpp

@@ -88,6 +88,19 @@ bool PulseReceiver::start(uint32_t expectedHz, float expectedDutyPct,
   return startCapture(false);
 }
 
+bool PulseReceiver::startRaw() {
+  if (!queue_ || running_) return false;
+#if OPTICAL_USE_MCPWM_CAPTURE
+  if (!captureTimer_) return false;
+#endif
+#if !OPTICAL_USE_MCPWM_CAPTURE
+  cpuTickHz_ = getCpuFrequencyMhz() * 1000000UL;
+  if (!cpuTickHz_) return false;
+#endif
+  resetStream();
+  return startCapture(false);
+}
+
 #if OPTICAL_USE_MCPWM_CAPTURE
 bool PulseReceiver::configureDriverTxCapture(bool risingEdge) {
   if (running_) return false;
@@ -376,6 +389,18 @@ size_t PulseReceiver::readPeriods(PulsePeriod *periods, size_t capacity,
   return count;
 }
 
+size_t PulseReceiver::readRawEdges(CaptureEvent *events, size_t capacity,
+                                   TickType_t waitTicks) {
+  if (!events || !capacity) return 0;
+  size_t count = 0;
+  Edge edge = {};
+  while (count < capacity && nextOrderedEdge(edge, count ? 0 : waitTicks)) {
+    const TimedEdge timed = extendEdge(edge);
+    events[count++] = {timed.tick, timed.rising, CaptureSource::RX};
+  }
+  return count;
+}
+
 size_t PulseReceiver::readEvents(CaptureEvent *events, size_t capacity,
                                  TickType_t waitTicks) {
   if (!events || capacity < 3U || !txCaptureEnabled_ || !driverPulseTicks_ ||

OpticalChannelTester/Receiver.h

@@ -24,11 +24,13 @@ class PulseReceiver {
  public:
   bool begin();
   bool start(uint32_t expectedHz, float expectedDutyPct, bool activeLightOn);
+  bool startRaw();
   bool startDriver(uint32_t frequencyHz, uint32_t pulseNs,
                    bool activeTxLightOn);
   void stop();
   void resetStream();
   size_t readPeriods(PulsePeriod *periods, size_t capacity, TickType_t waitTicks = 0);
+  size_t readRawEdges(CaptureEvent *events, size_t capacity, TickType_t waitTicks = 0);
   size_t readEvents(CaptureEvent *events, size_t capacity, TickType_t waitTicks = 0);
   uint32_t takeDroppedItems();
   uint32_t tickHz() const;

OpticalChannelTester/SettingsStore.cpp

@@ -8,10 +8,10 @@
 namespace { constexpr uint16_t SETTINGS_VERSION = 11; constexpr char NAMESPACE[] = "opt-test"; }
 
 void SettingsStore::defaults(Settings &s) const {
-  // 2 kHz, 200 us .. 2 us, 5%, 1 s.
+  // 2 kHz, 100 us .. 2 us, 5%, 1 s.
   s = {SETTINGS_VERSION, static_cast<uint8_t>(Role::SOLO),
     static_cast<uint8_t>(TestKind::OPTICAL), static_cast<uint8_t>(LightCode::HH),
-    2, 6, 3, 2, 3, static_cast<uint8_t>(TestGroup::OPTICS),
+    2, 4, 3, 2, 3, static_cast<uint8_t>(TestGroup::OPTICS),
     static_cast<uint8_t>(BoardTest::ADC), 0};
   s.checksum = settingsChecksum(s);
 }
@@ -20,9 +20,9 @@ bool SettingsStore::valid(const Settings &s) const {
   return s.version == SETTINGS_VERSION && s.role <= static_cast<uint8_t>(Role::SLAVE) &&
     s.testGroup <= static_cast<uint8_t>(TestGroup::BOARD) &&
     s.boardTest <= static_cast<uint8_t>(BoardTest::RX_INPUT) &&
-    s.testKind <= static_cast<uint8_t>(TestKind::DRIVER) &&
+    s.testKind <= static_cast<uint8_t>(TestKind::PWM_OUTPUT) &&
     s.lightCode <= static_cast<uint8_t>(LightCode::LL) &&
-    (s.testKind != static_cast<uint8_t>(TestKind::DRIVER) ||
+    (s.testKind == static_cast<uint8_t>(TestKind::OPTICAL) ||
       s.role == static_cast<uint8_t>(Role::SOLO)) &&
     s.frequencyIndex < countOf(PWM_FREQUENCY_OPTIONS_HZ) &&
     s.maxPulseIndex < countOf(MAX_PULSE_OPTIONS_NS) &&

OpticalChannelTester/SignalProbe.cpp

@@ -0,0 +1,236 @@
+#include "SignalProbe.h"
+#include "Config.h"
+#include <esp32-hal-cpu.h>
+
+namespace {
+constexpr uint32_t DISPLAY_INTERVAL_MS = 250;
+constexpr uint8_t PERIOD_TOLERANCE_PCT = 10;
+
+bool pwmPointAvailable(uint32_t frequencyHz, uint32_t pulseNs) {
+  return static_cast<uint64_t>(frequencyHz) * pulseNs < 1000000000ULL;
+}
+
+void formatWidth(uint64_t nanoseconds, char *out, size_t size) {
+  if (nanoseconds < 1000ULL)
+    snprintf(out, size, "%lluns", nanoseconds);
+  else if (nanoseconds < 1000000ULL)
+    snprintf(out, size, "%.2fus", nanoseconds / 1000.0);
+  else
+    snprintf(out, size, "%.2fms", nanoseconds / 1000000.0);
+}
+
+void formatPulseCount(uint64_t count, char *out, size_t size) {
+  if (count < 1000000ULL) snprintf(out, size, "%llu", count);
+  else if (count < 1000000000ULL) snprintf(out, size, "%lluM", count / 1000000ULL);
+  else snprintf(out, size, "%lluG", count / 1000000000ULL);
+}
+}
+
+SignalProbe::SignalProbe() : startButton_(GPIO_BUTTON_START),
+  modeButton_(GPIO_BUTTON_MODE) {}
+
+void SignalProbe::begin() {
+  Serial.begin(SERIAL_BAUD);
+#if ARDUINO_USB_CDC_ON_BOOT
+  Serial.setTxTimeoutMs(SERIAL_TX_TIMEOUT_MS);
+#endif
+  setCpuFrequencyMhz(160);
+  startButton_.begin();
+  modeButton_.begin();
+  pwm_.begin();
+  pwm_.configureActiveLight(true);
+  display_.begin();
+  receiverInitialized_ = receiver_.begin();
+  rxReady_ = receiverInitialized_ && captureStart();
+  applyPwm();
+  Serial.printf("Signal probe: MODE short=frequency, MODE long=pulse, START short=reset RX minimum, START long=PWM on/off, hold both=RX active level; RX=%s\n",
+    rxActiveHigh_ ? "HIGH" : "LOW");
+  show();
+}
+
+bool SignalProbe::captureStart() {
+  if (!receiver_.startRaw()) {
+    Serial.println("RX capture start failed");
+    return false;
+  }
+  havePulseStart_ = false;
+  havePulseEnd_ = false;
+  extraEdgeInPeriod_ = false;
+  return true;
+}
+
+void SignalProbe::resetMinimum() {
+  if (rxReady_) receiver_.stop();
+  rxReady_ = receiverInitialized_ && captureStart();
+  minTicks_ = UINT64_MAX;
+  pulseCount_ = 0;
+  edgeCount_ = 0;
+  rejectedPeriods_ = 0;
+  displayDirty_ = true;
+  Serial.println("RX minimum reset");
+}
+
+void SignalProbe::updateCapture() {
+  if (!rxReady_) return;
+  CaptureEvent edges[64];
+  for (uint8_t batch = 0; batch < 8; ++batch) {
+    const size_t count = receiver_.readRawEdges(edges, countOf(edges));
+    if (!count) break;
+    uint64_t batchMinimum = minTicks_;
+    uint64_t batchPulses = 0;
+    uint64_t batchRejected = 0;
+    const bool activeRising = rxActiveHigh_;
+    const uint32_t expectedHz = PWM_FREQUENCY_OPTIONS_HZ[frequencyIndex_];
+    const uint64_t expectedPeriod = receiver_.tickHz() / expectedHz;
+    for (size_t i = 0; i < count; ++i) {
+      if (edges[i].rising == activeRising) {
+        if (havePulseStart_) {
+          const uint64_t period = edges[i].tick - pulseStartTick_;
+          const uint64_t width = havePulseEnd_
+            ? pulseEndTick_ - pulseStartTick_ : 0;
+          const uint64_t error = period > expectedPeriod
+            ? period - expectedPeriod : expectedPeriod - period;
+          if (havePulseEnd_ && !extraEdgeInPeriod_ && period && width && width < period &&
+              error * 100U <= expectedPeriod * PERIOD_TOLERANCE_PCT) {
+            if (width < batchMinimum) batchMinimum = width;
+            ++batchPulses;
+          } else {
+            ++batchRejected;
+          }
+        }
+        pulseStartTick_ = edges[i].tick;
+        havePulseStart_ = true;
+        havePulseEnd_ = false;
+        extraEdgeInPeriod_ = false;
+      } else if (havePulseStart_ && !havePulseEnd_ &&
+                 edges[i].tick > pulseStartTick_) {
+        pulseEndTick_ = edges[i].tick;
+        havePulseEnd_ = true;
+      } else if (havePulseStart_) {
+        extraEdgeInPeriod_ = true;
+      }
+    }
+    const uint32_t dropped = receiver_.takeDroppedItems();
+    if (dropped) {
+      Serial.printf("RX capture overflow: %lu edges lost; restarting capture\n", dropped);
+      receiver_.stop();
+      rxReady_ = captureStart();
+      displayDirty_ = true;
+      return;
+    }
+    edgeCount_ += count;
+    pulseCount_ += batchPulses;
+    rejectedPeriods_ += batchRejected;
+    displayDirty_ = true;
+    if (batchMinimum < minTicks_) {
+      minTicks_ = batchMinimum;
+      displayDirty_ = true;
+    }
+  }
+}
+
+void SignalProbe::applyPwm() {
+  pwm_.stop();
+  if (!pwmEnabled_) {
+    Serial.println("PWM off");
+    displayDirty_ = true;
+    return;
+  }
+  const uint32_t frequency = PWM_FREQUENCY_OPTIONS_HZ[frequencyIndex_];
+  const uint32_t pulse = MAX_PULSE_OPTIONS_NS[pulseIndex_];
+  if (!pwm_.start(frequency, pulse, actual_)) {
+    Serial.printf("PWM start failed: %lu Hz, %lu ns\n", frequency, pulse);
+    pwmEnabled_ = false;
+  } else {
+    Serial.printf("PWM GPIO=%u requested=%luHz/%luns actual=%luHz/%luns\n",
+      GPIO_PWM, frequency, pulse, actual_.actualHz, actual_.actualPulseNs);
+  }
+  displayDirty_ = true;
+}
+
+void SignalProbe::advanceFrequency() {
+  const uint8_t count = static_cast<uint8_t>(countOf(PWM_FREQUENCY_OPTIONS_HZ));
+  for (uint8_t step = 0; step < count; ++step) {
+    frequencyIndex_ = static_cast<uint8_t>((frequencyIndex_ + 1U) % count);
+    if (pwmPointAvailable(PWM_FREQUENCY_OPTIONS_HZ[frequencyIndex_],
+                          MAX_PULSE_OPTIONS_NS[pulseIndex_])) break;
+  }
+  applyPwm();
+  resetMinimum();
+}
+
+void SignalProbe::advancePulse() {
+  const uint8_t count = static_cast<uint8_t>(countOf(MAX_PULSE_OPTIONS_NS));
+  for (uint8_t step = 0; step < count; ++step) {
+    pulseIndex_ = static_cast<uint8_t>((pulseIndex_ + 1U) % count);
+    if (pwmPointAvailable(PWM_FREQUENCY_OPTIONS_HZ[frequencyIndex_],
+                          MAX_PULSE_OPTIONS_NS[pulseIndex_])) break;
+  }
+  applyPwm();
+  resetMinimum();
+}
+
+void SignalProbe::show() {
+  char frequency[16], pulse[16], first[64], second[64];
+  const uint32_t shownFrequency = pwm_.running() ? actual_.actualHz
+    : PWM_FREQUENCY_OPTIONS_HZ[frequencyIndex_];
+  const uint32_t shownPulse = pwm_.running() ? actual_.actualPulseNs
+    : MAX_PULSE_OPTIONS_NS[pulseIndex_];
+  Display::formatPwmFrequency(shownFrequency,
+    frequency, sizeof(frequency));
+  Display::formatPulse(shownPulse, pulse, sizeof(pulse));
+  snprintf(first, sizeof(first), "PWM%s %s %s", pwmEnabled_ ? "" : " OFF",
+    frequency, pulse);
+  if (!rxReady_) {
+    snprintf(second, sizeof(second), "RX: ERROR");
+  } else if (minTicks_ == UINT64_MAX) {
+    snprintf(second, sizeof(second), "RX E:%llu BAD:%llu", edgeCount_, rejectedPeriods_);
+  } else {
+    char width[24], count[12];
+    const uint64_t nanoseconds =
+      (minTicks_ * 1000000000ULL + receiver_.tickHz() / 2U) / receiver_.tickHz();
+    formatWidth(nanoseconds, width, sizeof(width));
+    formatPulseCount(pulseCount_, count, sizeof(count));
+    snprintf(second, sizeof(second), "MIN:%s N:%s", width, count);
+    Serial.printf("RX minimum=%lluns, periods=%llu, rejected=%llu, edges=%llu\n",
+      nanoseconds, pulseCount_, rejectedPeriods_, edgeCount_);
+  }
+  display_.show(first, second, 0, 0, rxActiveHigh_ ? "H" : "L");
+  lastDisplayMs_ = millis();
+  displayDirty_ = false;
+}
+
+void SignalProbe::update() {
+  const uint32_t now = millis();
+  const ButtonEvent start = startButton_.update(now);
+  const ButtonEvent mode = modeButton_.update(now);
+  if (startButton_.pressed() && modeButton_.pressed()) {
+    if (!bothHeld_) {
+      bothHeld_ = true;
+      bothHeldSinceMs_ = now;
+      startButton_.suppressUntilRelease();
+      modeButton_.suppressUntilRelease();
+    }
+    if (!bothHeldHandled_ && now - bothHeldSinceMs_ >= BUTTON_LONG_PRESS_MS) {
+      rxActiveHigh_ = !rxActiveHigh_;
+      bothHeldHandled_ = true;
+      resetMinimum();
+      Serial.printf("RX active level=%s\n", rxActiveHigh_ ? "HIGH" : "LOW");
+    }
+  } else if (bothHeld_) {
+    if (!startButton_.pressed() && !modeButton_.pressed()) {
+      bothHeld_ = false;
+      bothHeldHandled_ = false;
+    }
+  } else {
+    if (mode == ButtonEvent::SHORT) advanceFrequency();
+    else if (mode == ButtonEvent::LONG) advancePulse();
+    if (start == ButtonEvent::SHORT) resetMinimum();
+    else if (start == ButtonEvent::LONG) {
+      pwmEnabled_ = !pwmEnabled_;
+      applyPwm();
+    }
+  }
+  updateCapture();
+  if (displayDirty_ && now - lastDisplayMs_ >= DISPLAY_INTERVAL_MS) show();
+}

OpticalChannelTester/SignalProbe.h

@@ -0,0 +1,49 @@
+#pragma once
+
+#include "Config.h"
+#include "Buttons.h"
+#include "Display.h"
+#include "Pwm.h"
+#include "Receiver.h"
+
+class SignalProbe {
+ public:
+  SignalProbe();
+  void begin();
+  void update();
+
+ private:
+  bool captureStart();
+  void resetMinimum();
+  void updateCapture();
+  void advanceFrequency();
+  void advancePulse();
+  void applyPwm();
+  void show();
+
+  Button startButton_, modeButton_;
+  Display display_;
+  PwmGenerator pwm_;
+  PulseReceiver receiver_;
+  ActualPwm actual_ = {};
+  uint8_t frequencyIndex_ = 2;
+  uint8_t pulseIndex_ = 0;
+  bool pwmEnabled_ = true;
+  bool rxActiveHigh_ = RX_LIGHT_ON_GPIO_LEVEL == HIGH;
+  bool receiverInitialized_ = false;
+  bool rxReady_ = false;
+  bool havePulseStart_ = false;
+  bool havePulseEnd_ = false;
+  bool extraEdgeInPeriod_ = false;
+  bool displayDirty_ = true;
+  uint64_t pulseStartTick_ = 0;
+  uint64_t pulseEndTick_ = 0;
+  uint64_t minTicks_ = UINT64_MAX;
+  uint64_t pulseCount_ = 0;
+  uint64_t edgeCount_ = 0;
+  uint64_t rejectedPeriods_ = 0;
+  uint32_t lastDisplayMs_ = 0;
+  uint32_t bothHeldSinceMs_ = 0;
+  bool bothHeld_ = false;
+  bool bothHeldHandled_ = false;
+};

PCB/OptoTest.PrjPcb

@@ -38,23 +38,6 @@ PrefsVaultGUID=
 PrefsRevisionGUID=
 
 [Document1]
-DocumentPath=..\..\..\..\SSSAlDataBaseLib\SssAccesDatbase.DbLib
-AnnotationEnabled=1
-AnnotateStartValue=1
-AnnotationIndexControlEnabled=0
-AnnotateSuffix=
-AnnotateScope=All
-AnnotateOrder=-1
-DoLibraryUpdate=1
-DoDatabaseUpdate=1
-ClassGenCCAutoEnabled=1
-ClassGenCCAutoRoomEnabled=1
-ClassGenNCAutoScope=None
-DItemRevisionGUID=
-GenerateClassCluster=0
-DocumentUniqueId=
-
-[Document2]
 DocumentPath=Libs\Sensor Light.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -71,7 +54,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=XHSRCRCV
 
-[Document3]
+[Document2]
 DocumentPath=Libs\ESP32-C3-SuperMini.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -86,9 +69,9 @@ ClassGenCCAutoRoomEnabled=1
 ClassGenNCAutoScope=None
 DItemRevisionGUID=
 GenerateClassCluster=0
-DocumentUniqueId=MKGCXBOF
+DocumentUniqueId=URAFKFNP
 
-[Document4]
+[Document3]
 DocumentPath=Libs\ESP32-S3-SuperMini.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -103,9 +86,9 @@ ClassGenCCAutoRoomEnabled=1
 ClassGenNCAutoScope=None
 DItemRevisionGUID=
 GenerateClassCluster=0
-DocumentUniqueId=XJEJLSFH
+DocumentUniqueId=KNRSSPNM
 
-[Document5]
+[Document4]
 DocumentPath=Libs\HFBR-1528Z_HFBR-2528Z.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -122,7 +105,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document6]
+[Document5]
 DocumentPath=OptoTest.PcbDoc
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -139,7 +122,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=VJUIGDUR
 
-[Document7]
+[Document6]
 DocumentPath=OptoTest.SchDoc
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -156,7 +139,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=OSZVBCBN
 
-[Document8]
+[Document7]
 DocumentPath=Libs\ESP32-C3-SuperMini.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -173,7 +156,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=SBGUKPNI
 
-[Document9]
+[Document8]
 DocumentPath=Libs\ESP32-S3-SuperMini.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -190,7 +173,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=BAPDEFTM
 
-[Document10]
+[Document9]
 DocumentPath=Libs\Switch Push Botton.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -207,7 +190,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document11]
+[Document10]
 DocumentPath=Libs\Switch Push Botton.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -224,7 +207,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=ITMPIRQI
 
-[Document12]
+[Document11]
 DocumentPath=Libs\MOD_OLED_0.91_128x32.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -241,7 +224,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document13]
+[Document12]
 DocumentPath=Libs\MOD_OLED_0.91_128x32.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -258,7 +241,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=UNSXUFGW
 
-[Document14]
+[Document13]
 DocumentPath=Libs\SN75451BP.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -273,9 +256,9 @@ ClassGenCCAutoRoomEnabled=1
 ClassGenNCAutoScope=None
 DItemRevisionGUID=
 GenerateClassCluster=0
-DocumentUniqueId=LJKXCWYK
+DocumentUniqueId=A8G5624N
 
-[Document15]
+[Document14]
 DocumentPath=Libs\SN75451BP.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -292,7 +275,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document16]
+[Document15]
 DocumentPath=Libs\J_ARK2.Schlib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -307,9 +290,9 @@ ClassGenCCAutoRoomEnabled=1
 ClassGenNCAutoScope=None
 DItemRevisionGUID=
 GenerateClassCluster=0
-DocumentUniqueId=KHNXINHC
+DocumentUniqueId=HIEGOULK
 
-[Document17]
+[Document16]
 DocumentPath=Libs\J_ARK2_2.54.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -326,7 +309,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document18]
+[Document17]
 DocumentPath=Libs\Sensor.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -343,7 +326,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=SCOMYVDB
 
-[Document19]
+[Document18]
 DocumentPath=Libs\BPW34.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -360,7 +343,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=DEJBNXAE
 
-[Document20]
+[Document19]
 DocumentPath=Libs\OPA380.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -377,7 +360,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=TPLFYPML
 
-[Document21]
+[Document20]
 DocumentPath=Libs\OPA380.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -392,9 +375,9 @@ ClassGenCCAutoRoomEnabled=1
 ClassGenNCAutoScope=None
 DItemRevisionGUID=
 GenerateClassCluster=0
-DocumentUniqueId=A8G5624N
+DocumentUniqueId=MBMSOHVF
 
-[Document22]
+[Document21]
 DocumentPath=Libs\J_ARK3_2.54.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -411,7 +394,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document23]
+[Document22]
 DocumentPath=Libs\J_ARK3.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -426,9 +409,9 @@ ClassGenCCAutoRoomEnabled=1
 ClassGenNCAutoScope=None
 DItemRevisionGUID=
 GenerateClassCluster=0
-DocumentUniqueId=HIEGOULK
+DocumentUniqueId=GMSJVYGO
 
-[Document24]
+[Document23]
 DocumentPath=Libs\POT.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -445,7 +428,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=JKPGHLQK
 
-[Document25]
+[Document24]
 DocumentPath=Libs\POT_RK09D1130C2P.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -462,7 +445,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document26]
+[Document25]
 DocumentPath=Libs\P_HEADER_1x5.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -479,7 +462,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=KQQWVKPH
 
-[Document27]
+[Document26]
 DocumentPath=Libs\P_HEADER_1x5_2.54_ANGLE.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -496,7 +479,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document28]
+[Document27]
 DocumentPath=Libs\1208YD.PcbLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -513,7 +496,7 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=
 
-[Document29]
+[Document28]
 DocumentPath=Libs\1208YD.SchLib
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -530,66 +513,6 @@ DItemRevisionGUID=
 GenerateClassCluster=0
 DocumentUniqueId=GVWJKGKK
 
-[GeneratedDocument1]
-DocumentPath=Project Outputs for OptoTest\OptoTest.DRR
-DItemRevisionGUID=
-
-[GeneratedDocument2]
-DocumentPath=Project Outputs for OptoTest\OptoTest.EXTREP
-DItemRevisionGUID=
-
-[GeneratedDocument3]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GBL
-DItemRevisionGUID=
-
-[GeneratedDocument4]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GBO
-DItemRevisionGUID=
-
-[GeneratedDocument5]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GBP
-DItemRevisionGUID=
-
-[GeneratedDocument6]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GBS
-DItemRevisionGUID=
-
-[GeneratedDocument7]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GKO
-DItemRevisionGUID=
-
-[GeneratedDocument8]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GTL
-DItemRevisionGUID=
-
-[GeneratedDocument9]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GTO
-DItemRevisionGUID=
-
-[GeneratedDocument10]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GTP
-DItemRevisionGUID=
-
-[GeneratedDocument11]
-DocumentPath=Project Outputs for OptoTest\OptoTest.GTS
-DItemRevisionGUID=
-
-[GeneratedDocument12]
-DocumentPath=Project Outputs for OptoTest\OptoTest.LDP
-DItemRevisionGUID=
-
-[GeneratedDocument13]
-DocumentPath=Project Outputs for OptoTest\OptoTest.REP
-DItemRevisionGUID=
-
-[GeneratedDocument14]
-DocumentPath=Project Outputs for OptoTest\OptoTest.RUL
-DItemRevisionGUID=
-
-[GeneratedDocument15]
-DocumentPath=Project Outputs for OptoTest\OptoTest.TXT
-DItemRevisionGUID=
-
 [Configuration1]
 Name=Sources
 ParameterCount=0
@@ -709,7 +632,7 @@ OutputDefault20=0
 [OutputGroup2]
 Name=Simulator Outputs
 Description=
-TargetPrinter=Microsoft Print to PDF
+TargetPrinter=Adobe PDF
 PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
 
 [OutputGroup3]

PCB_Multiboard/OptoTest.PrjMbd

@@ -0,0 +1,1096 @@
+[Design]
+Version=1.0
+HierarchyMode=0
+ChannelRoomNamingStyle=0
+ReleasesFolder=
+ChannelDesignatorFormatString=$Component_$RoomName
+ChannelRoomLevelSeperator=_
+OpenOutputs=1
+ArchiveProject=0
+TimestampOutput=0
+SeparateFolders=0
+TemplateLocationPath=
+PinSwapBy_Netlabel=1
+PinSwapBy_Pin=1
+AllowPortNetNames=0
+AllowSheetEntryNetNames=1
+AppendSheetNumberToLocalNets=0
+NetlistSinglePinNets=0
+DefaultConfiguration=Default - All Constraints
+UserID=0xFFFFFFFF
+DefaultPcbProtel=1
+DefaultPcbPcad=0
+ReorderDocumentsOnCompile=1
+NameNetsHierarchically=0
+PowerPortNamesTakePriority=0
+PushECOToAnnotationFile=1
+DItemRevisionGUID=
+ReportSuppressedErrorsInMessages=0
+FSMCodingStyle=eFMSDropDownList_OneProcess
+FSMEncodingStyle=eFMSDropDownList_OneHot
+OutputPath=
+LogFolderPath=
+ManagedProjectGUID=
+IncludeDesignInRelease=0
+
+[Preferences]
+PrefsVaultGUID=
+PrefsRevisionGUID=
+
+[Document1]
+DocumentPath=OptoTest.MbaDoc
+AnnotationEnabled=1
+AnnotateStartValue=1
+AnnotationIndexControlEnabled=0
+AnnotateSuffix=
+AnnotateScope=All
+AnnotateOrder=-1
+DoLibraryUpdate=1
+DoDatabaseUpdate=1
+ClassGenCCAutoEnabled=1
+ClassGenCCAutoRoomEnabled=1
+ClassGenNCAutoScope=None
+DItemRevisionGUID=
+GenerateClassCluster=0
+DocumentUniqueId=d82442d4-bc50-4074-9a5f-ab3433238eee
+
+[Document2]
+DocumentPath=OptoTest.MbsDoc
+AnnotationEnabled=1
+AnnotateStartValue=1
+AnnotationIndexControlEnabled=0
+AnnotateSuffix=
+AnnotateScope=All
+AnnotateOrder=-1
+DoLibraryUpdate=1
+DoDatabaseUpdate=1
+ClassGenCCAutoEnabled=1
+ClassGenCCAutoRoomEnabled=1
+ClassGenNCAutoScope=None
+DItemRevisionGUID=
+GenerateClassCluster=0
+DocumentUniqueId=8534167a-ea05-4508-a2d2-705219d53200
+
+[Document3]
+DocumentPath=..\PCB\OptoTest.PrjPcb
+AnnotationEnabled=1
+AnnotateStartValue=1
+AnnotationIndexControlEnabled=0
+AnnotateSuffix=
+AnnotateScope=All
+AnnotateOrder=-1
+DoLibraryUpdate=1
+DoDatabaseUpdate=1
+ClassGenCCAutoEnabled=1
+ClassGenCCAutoRoomEnabled=1
+ClassGenNCAutoScope=None
+DItemRevisionGUID=
+GenerateClassCluster=0
+DocumentUniqueId=
+
+[Document4]
+DocumentPath=..\PCB_Charger\J5019_HW357.PrjPcb
+AnnotationEnabled=1
+AnnotateStartValue=1
+AnnotationIndexControlEnabled=0
+AnnotateSuffix=
+AnnotateScope=All
+AnnotateOrder=-1
+DoLibraryUpdate=1
+DoDatabaseUpdate=1
+ClassGenCCAutoEnabled=1
+ClassGenCCAutoRoomEnabled=1
+ClassGenNCAutoScope=None
+DItemRevisionGUID=
+GenerateClassCluster=0
+DocumentUniqueId=
+
+[OutputGroup1]
+Name=Netlist Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=CadnetixNetlist
+OutputName1=Cadnetix Netlist
+OutputDocumentPath1=
+OutputVariantName1=
+OutputDefault1=0
+OutputType2=CalayNetlist
+OutputName2=Calay Netlist
+OutputDocumentPath2=
+OutputVariantName2=
+OutputDefault2=0
+OutputType3=EDIF
+OutputName3=EDIF for PCB
+OutputDocumentPath3=
+OutputVariantName3=
+OutputDefault3=0
+OutputType4=EESofNetlist
+OutputName4=EESof Netlist
+OutputDocumentPath4=
+OutputVariantName4=
+OutputDefault4=0
+OutputType5=IntergraphNetlist
+OutputName5=Intergraph Netlist
+OutputDocumentPath5=
+OutputVariantName5=
+OutputDefault5=0
+OutputType6=MentorBoardStationNetlist
+OutputName6=Mentor BoardStation Netlist
+OutputDocumentPath6=
+OutputVariantName6=
+OutputDefault6=0
+OutputType7=MultiWire
+OutputName7=MultiWire
+OutputDocumentPath7=
+OutputVariantName7=
+OutputDefault7=0
+OutputType8=OrCadPCB2Netlist
+OutputName8=Orcad/PCB2 Netlist
+OutputDocumentPath8=
+OutputVariantName8=
+OutputDefault8=0
+OutputType9=PADSNetlist
+OutputName9=PADS ASCII Netlist
+OutputDocumentPath9=
+OutputVariantName9=
+OutputDefault9=0
+OutputType10=Pcad
+OutputName10=Pcad for PCB
+OutputDocumentPath10=
+OutputVariantName10=
+OutputDefault10=0
+OutputType11=PCADNetlist
+OutputName11=PCAD Netlist
+OutputDocumentPath11=
+OutputVariantName11=
+OutputDefault11=0
+OutputType12=PCADnltNetlist
+OutputName12=PCADnlt Netlist
+OutputDocumentPath12=
+OutputVariantName12=
+OutputDefault12=0
+OutputType13=Protel2Netlist
+OutputName13=Protel2 Netlist
+OutputDocumentPath13=
+OutputVariantName13=
+OutputDefault13=0
+OutputType14=ProtelNetlist
+OutputName14=Protel
+OutputDocumentPath14=
+OutputVariantName14=
+OutputDefault14=0
+OutputType15=RacalNetlist
+OutputName15=Racal Netlist
+OutputDocumentPath15=
+OutputVariantName15=
+OutputDefault15=0
+OutputType16=RINFNetlist
+OutputName16=RINF Netlist
+OutputDocumentPath16=
+OutputVariantName16=
+OutputDefault16=0
+OutputType17=SciCardsNetlist
+OutputName17=SciCards Netlist
+OutputDocumentPath17=
+OutputVariantName17=
+OutputDefault17=0
+OutputType18=TangoNetlist
+OutputName18=Tango Netlist
+OutputDocumentPath18=
+OutputVariantName18=
+OutputDefault18=0
+OutputType19=TelesisNetlist
+OutputName19=Telesis Netlist
+OutputDocumentPath19=
+OutputVariantName19=
+OutputDefault19=0
+OutputType20=WireListNetlist
+OutputName20=WireList Netlist
+OutputDocumentPath20=
+OutputVariantName20=
+OutputDefault20=0
+
+[OutputGroup2]
+Name=Simulator Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+
+[OutputGroup3]
+Name=Documentation Outputs
+Description=
+TargetPrinter=Virtual Printer
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=Composite
+OutputName1=Composite Drawing
+OutputDocumentPath1=
+OutputVariantName1=
+OutputDefault1=0
+PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType2=PCB 3D Print
+OutputName2=PCB 3D Print
+OutputDocumentPath2=
+OutputVariantName2=[No Variations]
+OutputDefault2=0
+PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType3=PCB 3D Video
+OutputName3=PCB 3D Video
+OutputDocumentPath3=
+OutputVariantName3=[No Variations]
+OutputDefault3=0
+PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType4=PCB Print
+OutputName4=PCB Prints
+OutputDocumentPath4=
+OutputVariantName4=
+OutputDefault4=0
+PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType5=PCBDrawing
+OutputName5=Draftsman
+OutputDocumentPath5=
+OutputVariantName5=[No Variations]
+OutputDefault5=0
+PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType6=PCBLIB Print
+OutputName6=PCBLIB Prints
+OutputDocumentPath6=
+OutputVariantName6=
+OutputDefault6=0
+PageOptions6=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType7=PDF3D
+OutputName7=PDF3D
+OutputDocumentPath7=
+OutputVariantName7=[No Variations]
+OutputDefault7=0
+PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType8=Report Print
+OutputName8=Report Prints
+OutputDocumentPath8=
+OutputVariantName8=
+OutputDefault8=0
+PageOptions8=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType9=Schematic Print
+OutputName9=Schematic Prints
+OutputDocumentPath9=
+OutputVariantName9=
+OutputDefault9=0
+PageOptions9=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType10=SimView Print
+OutputName10=SimView Prints
+OutputDocumentPath10=
+OutputVariantName10=
+OutputDefault10=0
+PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+
+[OutputGroup4]
+Name=Assembly Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=Assembly
+OutputName1=Assembly Drawings
+OutputDocumentPath1=
+OutputVariantName1=[No Variations]
+OutputDefault1=0
+PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType2=Pick Place
+OutputName2=Generates pick and place files
+OutputDocumentPath2=
+OutputVariantName2=[No Variations]
+OutputDefault2=0
+OutputType3=Test Points For Assembly
+OutputName3=Test Point Report
+OutputDocumentPath3=
+OutputVariantName3=[No Variations]
+OutputDefault3=0
+
+[OutputGroup5]
+Name=Fabrication Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=Board Stack Report
+OutputName1=Report Board Stack
+OutputDocumentPath1=
+OutputVariantName1=
+OutputDefault1=0
+PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType2=CompositeDrill
+OutputName2=Composite Drill Drawing
+OutputDocumentPath2=
+OutputVariantName2=
+OutputDefault2=0
+PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType3=Drill
+OutputName3=Drill Drawing/Guides
+OutputDocumentPath3=
+OutputVariantName3=
+OutputDefault3=0
+PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType4=Final
+OutputName4=Final Artwork Prints
+OutputDocumentPath4=
+OutputVariantName4=[No Variations]
+OutputDefault4=0
+PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType5=Gerber
+OutputName5=Gerber Files
+OutputDocumentPath5=
+OutputVariantName5=[No Variations]
+OutputDefault5=0
+OutputType6=Gerber X2
+OutputName6=Gerber X2 Files
+OutputDocumentPath6=
+OutputVariantName6=
+OutputDefault6=0
+OutputType7=IPC2581
+OutputName7=IPC-2581 Files
+OutputDocumentPath7=
+OutputVariantName7=
+OutputDefault7=0
+OutputType8=Mask
+OutputName8=Solder/Paste Mask Prints
+OutputDocumentPath8=
+OutputVariantName8=
+OutputDefault8=0
+PageOptions8=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType9=NC Drill
+OutputName9=NC Drill Files
+OutputDocumentPath9=
+OutputVariantName9=
+OutputDefault9=0
+OutputType10=ODB
+OutputName10=ODB++ Files
+OutputDocumentPath10=
+OutputVariantName10=[No Variations]
+OutputDefault10=0
+OutputType11=Plane
+OutputName11=Power-Plane Prints
+OutputDocumentPath11=
+OutputVariantName11=
+OutputDefault11=0
+PageOptions11=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType12=Test Points
+OutputName12=Test Point Report
+OutputDocumentPath12=
+OutputVariantName12=
+OutputDefault12=0
+
+[OutputGroup6]
+Name=Report Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=BOM_PartType
+OutputName1=Bill of Materials
+OutputDocumentPath1=
+OutputVariantName1=[No Variations]
+OutputDefault1=0
+PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType2=ComponentCrossReference
+OutputName2=Component Cross Reference Report
+OutputDocumentPath2=
+OutputVariantName2=[No Variations]
+OutputDefault2=0
+OutputType3=ReportHierarchy
+OutputName3=Report Project Hierarchy
+OutputDocumentPath3=
+OutputVariantName3=[No Variations]
+OutputDefault3=0
+OutputType4=Script
+OutputName4=Script Output
+OutputDocumentPath4=
+OutputVariantName4=[No Variations]
+OutputDefault4=0
+OutputType5=SimpleBOM
+OutputName5=Simple BOM
+OutputDocumentPath5=
+OutputVariantName5=[No Variations]
+OutputDefault5=0
+OutputType6=SinglePinNetReporter
+OutputName6=Report Single Pin Nets
+OutputDocumentPath6=
+OutputVariantName6=[No Variations]
+OutputDefault6=0
+
+[OutputGroup7]
+Name=Other Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=Text Print
+OutputName1=Text Print
+OutputDocumentPath1=
+OutputVariantName1=
+OutputDefault1=0
+PageOptions1=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType2=Text Print
+OutputName2=Text Print
+OutputDocumentPath2=
+OutputVariantName2=
+OutputDefault2=0
+PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType3=Text Print
+OutputName3=Text Print
+OutputDocumentPath3=
+OutputVariantName3=
+OutputDefault3=0
+PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType4=Text Print
+OutputName4=Text Print
+OutputDocumentPath4=
+OutputVariantName4=
+OutputDefault4=0
+PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType5=Text Print
+OutputName5=Text Print
+OutputDocumentPath5=
+OutputVariantName5=
+OutputDefault5=0
+PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType6=Text Print
+OutputName6=Text Print
+OutputDocumentPath6=
+OutputVariantName6=
+OutputDefault6=0
+PageOptions6=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType7=Text Print
+OutputName7=Text Print
+OutputDocumentPath7=
+OutputVariantName7=
+OutputDefault7=0
+PageOptions7=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType8=Text Print
+OutputName8=Text Print
+OutputDocumentPath8=
+OutputVariantName8=
+OutputDefault8=0
+PageOptions8=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType9=Text Print
+OutputName9=Text Print
+OutputDocumentPath9=
+OutputVariantName9=
+OutputDefault9=0
+PageOptions9=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType10=Text Print
+OutputName10=Text Print
+OutputDocumentPath10=
+OutputVariantName10=
+OutputDefault10=0
+PageOptions10=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType11=Text Print
+OutputName11=Text Print
+OutputDocumentPath11=
+OutputVariantName11=
+OutputDefault11=0
+PageOptions11=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType12=Text Print
+OutputName12=Text Print
+OutputDocumentPath12=
+OutputVariantName12=
+OutputDefault12=0
+PageOptions12=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType13=Text Print
+OutputName13=Text Print
+OutputDocumentPath13=
+OutputVariantName13=
+OutputDefault13=0
+PageOptions13=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType14=Text Print
+OutputName14=Text Print
+OutputDocumentPath14=
+OutputVariantName14=
+OutputDefault14=0
+PageOptions14=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType15=Text Print
+OutputName15=Text Print
+OutputDocumentPath15=
+OutputVariantName15=
+OutputDefault15=0
+PageOptions15=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType16=Text Print
+OutputName16=Text Print
+OutputDocumentPath16=
+OutputVariantName16=
+OutputDefault16=0
+PageOptions16=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType17=Text Print
+OutputName17=Text Print
+OutputDocumentPath17=
+OutputVariantName17=
+OutputDefault17=0
+PageOptions17=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType18=Text Print
+OutputName18=Text Print
+OutputDocumentPath18=
+OutputVariantName18=
+OutputDefault18=0
+PageOptions18=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType19=Text Print
+OutputName19=Text Print
+OutputDocumentPath19=
+OutputVariantName19=
+OutputDefault19=0
+PageOptions19=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType20=Text Print
+OutputName20=Text Print
+OutputDocumentPath20=
+OutputVariantName20=
+OutputDefault20=0
+PageOptions20=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType21=Text Print
+OutputName21=Text Print
+OutputDocumentPath21=
+OutputVariantName21=
+OutputDefault21=0
+PageOptions21=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType22=Text Print
+OutputName22=Text Print
+OutputDocumentPath22=
+OutputVariantName22=
+OutputDefault22=0
+PageOptions22=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType23=Text Print
+OutputName23=Text Print
+OutputDocumentPath23=
+OutputVariantName23=
+OutputDefault23=0
+PageOptions23=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType24=Text Print
+OutputName24=Text Print
+OutputDocumentPath24=
+OutputVariantName24=
+OutputDefault24=0
+PageOptions24=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType25=Text Print
+OutputName25=Text Print
+OutputDocumentPath25=
+OutputVariantName25=
+OutputDefault25=0
+PageOptions25=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType26=Text Print
+OutputName26=Text Print
+OutputDocumentPath26=
+OutputVariantName26=
+OutputDefault26=0
+PageOptions26=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType27=Text Print
+OutputName27=Text Print
+OutputDocumentPath27=
+OutputVariantName27=
+OutputDefault27=0
+PageOptions27=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType28=Text Print
+OutputName28=Text Print
+OutputDocumentPath28=
+OutputVariantName28=
+OutputDefault28=0
+PageOptions28=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType29=Text Print
+OutputName29=Text Print
+OutputDocumentPath29=
+OutputVariantName29=
+OutputDefault29=0
+PageOptions29=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+
+[OutputGroup8]
+Name=Validation Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=BOM_Violations
+OutputName1=BOM Checks Report
+OutputDocumentPath1=
+OutputVariantName1=
+OutputDefault1=0
+OutputType2=Component states check
+OutputName2=Server's components states check
+OutputDocumentPath2=
+OutputVariantName2=
+OutputDefault2=0
+OutputType3=Configuration compliance
+OutputName3=Environment configuration compliance check
+OutputDocumentPath3=
+OutputVariantName3=
+OutputDefault3=0
+OutputType4=Design Rules Check
+OutputName4=Design Rules Check
+OutputDocumentPath4=
+OutputVariantName4=
+OutputDefault4=0
+PageOptions4=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType5=Differences Report
+OutputName5=Differences Report
+OutputDocumentPath5=
+OutputVariantName5=
+OutputDefault5=0
+PageOptions5=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType6=Electrical Rules Check
+OutputName6=Electrical Rules Check
+OutputDocumentPath6=
+OutputVariantName6=
+OutputDefault6=0
+PageOptions6=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+OutputType7=Footprint Comparison Report
+OutputName7=Footprint Comparison Report
+OutputDocumentPath7=
+OutputVariantName7=
+OutputDefault7=0
+
+[OutputGroup9]
+Name=Export Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=AutoCAD dwg/dxf PCB
+OutputName1=AutoCAD dwg/dxf File PCB
+OutputDocumentPath1=
+OutputVariantName1=
+OutputDefault1=0
+OutputType2=AutoCAD dwg/dxf Schematic
+OutputName2=AutoCAD dwg/dxf File Schematic
+OutputDocumentPath2=
+OutputVariantName2=
+OutputDefault2=0
+OutputType3=ExportIDF
+OutputName3=Export IDF
+OutputDocumentPath3=
+OutputVariantName3=
+OutputDefault3=0
+OutputType4=ExportPARASOLID
+OutputName4=Export PARASOLID
+OutputDocumentPath4=
+OutputVariantName4=[No Variations]
+OutputDefault4=0
+OutputType5=ExportSTEP
+OutputName5=Export STEP
+OutputDocumentPath5=
+OutputVariantName5=[No Variations]
+OutputDefault5=0
+OutputType6=ExportVRML
+OutputName6=Export VRML
+OutputDocumentPath6=
+OutputVariantName6=[No Variations]
+OutputDefault6=0
+OutputType7=MBAExportPARASOLID
+OutputName7=Export PARASOLID
+OutputDocumentPath7=
+OutputVariantName7=
+OutputDefault7=0
+OutputType8=MBAExportSTEP
+OutputName8=Export STEP
+OutputDocumentPath8=
+OutputVariantName8=
+OutputDefault8=0
+OutputType9=Save As/Export PCB
+OutputName9=Save As/Export PCB
+OutputDocumentPath9=
+OutputVariantName9=
+OutputDefault9=0
+OutputType10=Save As/Export Schematic
+OutputName10=Save As/Export Schematic
+OutputDocumentPath10=
+OutputVariantName10=
+OutputDefault10=0
+OutputType11=Specctra Design PCB
+OutputName11=Specctra Design PCB
+OutputDocumentPath11=
+OutputVariantName11=
+OutputDefault11=0
+
+[OutputGroup10]
+Name=PostProcess Outputs
+Description=
+TargetPrinter=Adobe PDF
+PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
+OutputType1=Copy Files
+OutputName1=Copy Files
+OutputDocumentPath1=
+OutputVariantName1=
+OutputDefault1=0
+
+[Modification Levels]
+Type1=1
+Type2=1
+Type3=1
+Type4=1
+Type5=1
+Type6=1
+Type7=1
+Type8=1
+Type9=1
+Type10=1
+Type11=1
+Type12=1
+Type13=1
+Type14=1
+Type15=1
+Type16=1
+Type17=1
+Type18=1
+Type19=1
+Type20=1
+Type21=1
+Type22=1
+Type23=1
+Type24=1
+Type25=1
+Type26=1
+Type27=1
+Type28=1
+Type29=1
+Type30=1
+Type31=1
+Type32=1
+Type33=1
+Type34=1
+Type35=1
+Type36=1
+Type37=1
+Type38=1
+Type39=1
+Type40=1
+Type41=1
+Type42=1
+Type43=1
+Type44=1
+Type45=1
+Type46=1
+Type47=1
+Type48=1
+Type49=1
+Type50=1
+Type51=1
+Type52=1
+Type53=1
+Type54=1
+Type55=1
+Type56=1
+Type57=1
+Type58=1
+Type59=1
+Type60=1
+Type61=1
+Type62=1
+Type63=1
+Type64=1
+Type65=1
+Type66=1
+Type67=1
+Type68=1
+Type69=1
+Type70=1
+Type71=1
+Type72=1
+Type73=1
+Type74=1
+Type75=1
+Type76=1
+Type77=1
+Type78=1
+Type79=1
+Type80=1
+Type81=1
+Type82=1
+Type83=1
+Type84=1
+Type85=1
+Type86=1
+Type87=1
+Type88=1
+Type89=1
+Type90=1
+Type91=1
+Type92=1
+Type93=1
+Type94=1
+Type95=1
+Type96=1
+Type97=1
+Type98=1
+Type99=1
+Type100=1
+Type101=1
+Type102=1
+Type103=1
+Type104=1
+Type105=1
+Type106=1
+Type107=1
+Type108=1
+Type109=1
+Type110=1
+Type111=1
+Type112=1
+Type113=1
+Type114=1
+Type115=1
+Type116=1
+Type117=1
+
+[Difference Levels]
+Type1=1
+Type2=1
+Type3=1
+Type4=1
+Type5=1
+Type6=1
+Type7=1
+Type8=1
+Type9=1
+Type10=1
+Type11=1
+Type12=1
+Type13=1
+Type14=1
+Type15=1
+Type16=1
+Type17=1
+Type18=1
+Type19=1
+Type20=1
+Type21=1
+Type22=1
+Type23=1
+Type24=1
+Type25=1
+Type26=1
+Type27=1
+Type28=1
+Type29=1
+Type30=1
+Type31=1
+Type32=1
+Type33=1
+Type34=1
+Type35=1
+Type36=1
+Type37=1
+Type38=1
+Type39=1
+Type40=1
+Type41=1
+Type42=1
+Type43=1
+Type44=1
+Type45=1
+Type46=1
+Type47=1
+Type48=1
+Type49=1
+Type50=1
+Type51=1
+Type52=1
+Type53=1
+Type54=1
+Type55=1
+Type56=1
+Type57=1
+Type58=1
+Type59=1
+Type60=1
+Type61=1
+Type62=1
+Type63=1
+Type64=1
+Type65=1
+Type66=1
+
+[Electrical Rules Check]
+Type1=1
+Type2=1
+Type3=2
+Type4=1
+Type5=2
+Type6=2
+Type7=1
+Type8=1
+Type9=1
+Type10=1
+Type11=2
+Type12=2
+Type13=2
+Type14=1
+Type15=1
+Type16=1
+Type17=1
+Type18=1
+Type19=1
+Type20=1
+Type21=1
+Type22=1
+Type23=1
+Type24=1
+Type25=2
+Type26=2
+Type27=2
+Type28=1
+Type29=1
+Type30=1
+Type31=1
+Type32=2
+Type33=2
+Type34=2
+Type35=1
+Type36=2
+Type37=1
+Type38=2
+Type39=2
+Type40=2
+Type41=0
+Type42=2
+Type43=1
+Type44=1
+Type45=2
+Type46=1
+Type47=2
+Type48=2
+Type49=1
+Type50=2
+Type51=1
+Type52=1
+Type53=1
+Type54=1
+Type55=1
+Type56=2
+Type57=1
+Type58=1
+Type59=2
+Type60=1
+Type61=2
+Type62=2
+Type63=1
+Type64=0
+Type65=2
+Type66=3
+Type67=2
+Type68=2
+Type69=2
+Type70=2
+Type71=2
+Type72=2
+Type73=2
+Type74=1
+Type75=2
+Type76=1
+Type77=1
+Type78=1
+Type79=1
+Type80=2
+Type81=3
+Type82=3
+Type83=3
+Type84=3
+Type85=3
+Type86=2
+Type87=2
+Type88=2
+Type89=1
+Type90=1
+Type91=3
+Type92=3
+Type93=2
+Type94=2
+Type95=2
+Type96=2
+Type97=2
+Type98=0
+Type99=1
+Type100=2
+Type101=1
+Type102=2
+Type103=2
+Type104=1
+Type105=2
+Type106=2
+Type107=2
+Type108=2
+Type109=1
+Type110=1
+Type111=1
+Type112=1
+Type113=1
+Type114=2
+Type115=2
+Type116=2
+Type117=3
+Type118=3
+Type119=3
+MultiChannelAlternate=2
+AlternateItemFail=3
+Type122=2
+
+[ERC Connection Matrix]
+L1=NNNNNNNNNNNWNNNWW
+L2=NNWNNNNWWWNWNWNWN
+L3=NWEENEEEENEWNEEWN
+L4=NNENNNWEENNWNENWN
+L5=NNNNNNNNNNNNNNNNN
+L6=NNENNNNEENNWNENWN
+L7=NNEWNNWEENNWNENWN
+L8=NWEENEENEEENNEENN
+L9=NWEENEEEENEWNEEWW
+L10=NWNNNNNENNEWNNEWN
+L11=NNENNNNEEENWNENWN
+L12=WWWWNWWNWWWNWWWNN
+L13=NNNNNNNNNNNWNNNWW
+L14=NWEENEEEENEWNEEWW
+L15=NNENNNNEEENWNENWW
+L16=WWWWNWWNWWWNWWWNW
+L17=WNNNNNNNWNNNWWWWN
+
+[Annotate]
+SortOrder=3
+SortLocation=0
+MatchParameter1=Comment
+MatchStrictly1=1
+MatchParameter2=Library Reference
+MatchStrictly2=1
+PhysicalNamingFormat=$Component_$RoomName
+GlobalIndexSortOrder=3
+GlobalIndexSortLocation=0
+
+[PrjClassGen]
+CompClassManualEnabled=0
+CompClassManualRoomEnabled=0
+NetClassAutoBusEnabled=1
+NetClassAutoCompEnabled=0
+NetClassAutoNamedHarnessEnabled=0
+NetClassManualEnabled=1
+NetClassSeparateForBusSections=0
+
+[LibraryUpdateOptions]
+SelectedOnly=0
+UpdateVariants=1
+PartTypes=0
+FullReplace=1
+UpdateDesignatorLock=1
+UpdatePartIDLock=1
+PreserveParameterLocations=1
+PreserveParameterVisibility=1
+DoGraphics=1
+DoParameters=1
+DoModels=1
+AddParameters=0
+RemoveParameters=0
+AddModels=1
+RemoveModels=1
+UpdateCurrentModels=1
+
+[DatabaseUpdateOptions]
+SelectedOnly=0
+UpdateVariants=1
+PartTypes=0
+
+[Comparison Options]
+ComparisonOptions0=Kind=Net|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0
+ComparisonOptions1=Kind=Net Class|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0
+ComparisonOptions2=Kind=Component Class|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0
+ComparisonOptions3=Kind=Rule|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0
+ComparisonOptions4=Kind=Differential Pair|MinPercent=50|MinMatch=1|ShowMatch=0|Confirm=0|UseName=0|InclAllRules=0
+ComparisonOptions5=Kind=Structure Class|MinPercent=75|MinMatch=3|ShowMatch=-1|Confirm=-1|UseName=-1|InclAllRules=0
+
+[SmartPDF]
+PageOptions=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+

PCB_Multiboard/OptoTest.PrjMbdStructure

@@ -0,0 +1,4 @@
+Record=DiagramHierarchy|SourceDocument=OptoTest.MbsDoc|Kind=Multi-board Schematic Module|Designator=1|Source=..\PCB\OptoTest.PrjPcb
+Record=SubProject|SourceDocument=OptoTest.MbsDoc|ProjectPath=..\PCB\OptoTest.PrjPcb
+Record=DiagramHierarchy|SourceDocument=OptoTest.MbsDoc|Kind=Multi-board Schematic Module|Designator=2|Source=..\PCB_Charger\J5019_HW357.PrjPcb
+Record=SubProject|SourceDocument=OptoTest.MbsDoc|ProjectPath=..\PCB_Charger\J5019_HW357.PrjPcb

README.md

@@ -6,8 +6,8 @@
 
 - неблокирующий конечный автомат без `pulseIn()` и длинных `delay()`;
 - общие для оптического и драйверного тестов частота PWM и диапазон импульсов;
-- четыре рабочих режима: `SOLO OPTICAL`, `SOLO DRIVER` (только S3),
+- пять рабочих режимов: `SOLO OPTICAL`, `SOLO DRIVER` (только S3),
-  `MASTER OPTICAL`, `SLAVE OPTICAL`;
+  `SOLO PWM`, `MASTER OPTICAL`, `SLAVE OPTICAL`;
 - настраиваемый для теста драйвера код `HH`, `HL`, `LH`, `LL`; в тесте
   оптики полярность входного сигнала определяется автоматически;
 - аппаратные LEDC (C3) и MCPWM (S3) с расчётом реально получившихся частоты и длительности импульса;
@@ -40,7 +40,8 @@ Arduino sketch находится в каталоге `OpticalChannelTester`:
 - `Receiver.*` — MCPWM Capture на S3 / совместимый GPIO fallback;
 - `Measurement.*` — строгая проверка периодов;
 - `Protocol.*`, `Radio.*` — ESP-NOW;
-- `App.*` — общий конечный автомат SOLO/MASTER/SLAVE.
+- `App.*` — общий конечный автомат SOLO/MASTER/SLAVE;
+- `SignalProbe.*` — тестовый вариант прошивки PWM/Rx.
 
 ## Требования Arduino IDE
 
@@ -187,11 +188,17 @@ MASTER <~~~~ ESP-NOW Wi-Fi channel 6 ~~~~> SLAVE
 
 В ожидании в группе `ОПТИКА` на S3:
 
-- MODE short: `SOLO ОПТИКА → SOLO ДРАЙВЕР → MASTER ОПТИКА → SLAVE ОПТИКА`;
+- MODE short: `SOLO ОПТИКА → SOLO ДРАЙВЕР → SOLO ШИМ → MASTER ОПТИКА → SLAVE ОПТИКА`;
 - MODE long: открыть настройки;
 - START short: начать тест;
 - START long во время теста: ABORT, PWM немедленно выключается.
 
+На C3 режим `SOLO ДРАЙВЕР` пропускается. В `SOLO ШИМ` выход непрерывно выдаёт
+выбранную частоту и длительность импульса без проверки Rx. Частота задаётся
+пунктом `ЧАСТОТА ШИМ`, длительность — пунктом `ИМПУЛЬС ШИМ` (общим с
+`МАКС. ИМПУЛЬС` остальных режимов). Удержание START или команда `stop` в
+Serial выключает выход.
+
 В ожидании в группе `ПЛАТА`:
 
 - MODE short для аналоговой платы: `АЦП ↔ ШИМ ВЫХОД`;
@@ -256,6 +263,36 @@ START и MODE будят устройство. Первое, пробуждаю
 5. время выборки.
 6. код света `HH`, `HL`, `LH`, `LL` — только для теста драйвера.
 
+В `SOLO ШИМ` меню показывает только частоту и длительность одного импульса.
+
+### Тестовая прошивка PWM/Rx
+
+Для отдельной проверки сигнала раскомментируйте `#define SIGNAL_PROBE_FIRMWARE`
+в `OpticalChannelTester/Config.h` и загрузите тот же скетч. Эта прошивка
+при включённом выходе выдаёт выбранный PWM на `GPIO_PWM` и независимо измеряет на
+`GPIO_RX` минимальную длительность активного импульса и число пойманных
+импульсов. Начальный активный уровень входа задаёт `RX_LIGHT_ON_GPIO_LEVEL`.
+Результат показывается на OLED и в Serial
+115200; при отсутствии OLED достаточно Serial.
+
+- MODE коротко: следующая частота из `PWM_FREQUENCY_OPTIONS_HZ`;
+- MODE удержать: следующая длительность из `MAX_PULSE_OPTIONS_NS`;
+- START коротко: сбросить найденный минимум и начать измерение заново;
+- START удержать: выключить или включить PWM;
+- START и MODE удержать вместе: переключить активный уровень Rx между HIGH и
+  LOW и сбросить накопленные измерения.
+
+Верхняя строка OLED показывает частоту и длительность импульса PWM; `OFF`
+означает выключенный выход. Буква `H` или `L` справа показывает текущий
+активный уровень Rx. Нижняя строка показывает минимум и число пойманных
+импульсов.
+
+Значения, при которых импульс не помещается в период, пропускаются. В статистику
+Rx попадают только полные периоды выбранной частоты; число фронтов и отброшенных
+периодов видно на экране, пока подходящие импульсы не найдены. Изменение PWM
+сбрасывает накопленные измерения. Для возврата к обычному тестеру закомментируйте
+`SIGNAL_PROBE_FIRMWARE` и загрузите скетч снова.
+
 Экран активного уровня:
 
 ```text