Добавлено тестировние платы в меню:

- Тест Tx Оптики
- Тест Rx Оптики
- Тест АЦП

OpticalChannelTester/Config_Text.h

@@ -21,6 +21,14 @@ constexpr const char *TEST_NAMES[] = {
   "ОПТИКА", "ДРАЙВЕР"
 };
 
+constexpr const char *TEST_GROUP_NAMES[] = {
+  "ОПТИКА", "ПЛАТА"
+};
+
+constexpr const char *BOARD_TEST_NAMES[] = {
+  "АЦП", "ШИМ ВЫХОД", "RX ВХОД"
+};
+
 constexpr const char *FAIL_NAMES[] = {
   "НЕТ ОШИБКИ",
   "НЕТ СИГНАЛА",
@@ -44,6 +52,7 @@ constexpr const char *MODE_PREFIX = "РЕЖИМ: ";
 constexpr const char *START_RUN = "ГОТОВ К ЗАПУСКУ";
 
 constexpr const char *MENU_FREQUENCY = "ЧАСТОТА ШИМ:";
+constexpr const char *MENU_TEST_GROUP = "ГРУППА ТЕСТОВ:";
 constexpr const char *MENU_MAX_PULSE = "МАКС. ИМПУЛЬС:";
 constexpr const char *MENU_MIN_PULSE = "МИН. ИМПУЛЬС:";
 constexpr const char *MENU_ACCURACY = "ТОЧНОСТЬ:";
@@ -53,6 +62,9 @@ constexpr const char *LIGHT_CODE_FORMAT = "TX:%c, RX:%c";
 constexpr const char *LIGHT_AUTO = "АВТО";
 constexpr const char *LIGHT_AUTO_FORMAT = "TX/RX: АВТО";
 constexpr const char *MENU_TOTAL_TIME = "ОБЩЕЕ ВРЕМЯ:";
+constexpr const char *BOARD_READY = "START: ЗАПУСК";
+constexpr const char *BOARD_STOP = "УДЕРЖ START: СТОП";
+constexpr const char *ADC_UNAVAILABLE = "АЦП НЕТ НА МАКЕТКЕ";
 constexpr const char *FREQUENCY_UNIT = " Гц";
 
 constexpr const char *SLAVE_READY = "СЛЕЙВ ГОТОВ";
@@ -87,6 +99,14 @@ constexpr const char *TEST_NAMES[] = {
   "OPTICAL", "DRIVER"
 };
 
+constexpr const char *TEST_GROUP_NAMES[] = {
+  "OPTICS", "BOARD"
+};
+
+constexpr const char *BOARD_TEST_NAMES[] = {
+  "ADC", "PWM OUTPUT", "RX INPUT"
+};
+
 constexpr const char *FAIL_NAMES[] = {
   "NONE",
   "NO SIGNAL",
@@ -110,6 +130,7 @@ constexpr const char *MODE_PREFIX = "MODE: ";
 constexpr const char *START_RUN = "READY TO START";
 
 constexpr const char *MENU_FREQUENCY = "PWM FREQUENCY:";
+constexpr const char *MENU_TEST_GROUP = "TEST GROUP:";
 constexpr const char *MENU_MAX_PULSE = "MAX PULSE:";
 constexpr const char *MENU_MIN_PULSE = "MIN PULSE:";
 constexpr const char *MENU_ACCURACY = "ACCURACY:";
@@ -119,6 +140,9 @@ constexpr const char *LIGHT_CODE_FORMAT = "TX:%c, RX:%c";
 constexpr const char *LIGHT_AUTO = "AUTO";
 constexpr const char *LIGHT_AUTO_FORMAT = "TX/RX: AUTO";
 constexpr const char *MENU_TOTAL_TIME = "TOTAL TIME:";
+constexpr const char *BOARD_READY = "START TO RUN";
+constexpr const char *BOARD_STOP = "HOLD START TO STOP";
+constexpr const char *ADC_UNAVAILABLE = "ADC ABSENT ON PROTOTYPE";
 constexpr const char *FREQUENCY_UNIT = " Hz";
 
 constexpr const char *SLAVE_READY = "SLAVE READY";