{
    "alignment": {
        "circle_diameter": 3,
        "top_point": [
            0,
            -2.0000000000000018
        ]
    },
    "cutout": {
        "bottom": 2,
        "enabled": true,
        "left": 2,
        "right": 2,
        "side": "auto",
        "tab_width": 0.8,
        "tabs_enabled": true,
        "top": 2
    },
    "files": [
        {
            "layer": "bottom",
            "mirror_x": false,
            "mirror_y": false,
            "path": "OptoTest.GBL"
        },
        {
            "layer": "top",
            "mirror_x": false,
            "mirror_y": false,
            "path": "OptoTest.GTL"
        },
        {
            "layer": "drill",
            "mirror_x": false,
            "mirror_y": false,
            "path": "OptoTest.TXT"
        }
    ],
    "mirror": {
        "axis": "Y",
        "enabled": true,
        "left_reference_offset": -9,
        "point": [
            91,
            0
        ],
        "reference_distance": 200
    },
    "output_dir": "F:/Work/CNC/CNC Software/CNCGerber/cam-output",
    "settings": {
        "combine_top_and_cutout": false,
        "cut_depth_per_pass": 0.5,
        "cut_multidepth": false,
        "cut_z": -0.05,
        "drill_depth_per_pass": 0.5,
        "drill_diameter": 0.9,
        "drill_multidepth": false,
        "drill_side": "top",
        "drill_z": -2.3,
        "feedrate_rapid": 500,
        "feedrate_xy": 200,
        "feedrate_z": 100,
        "include_m_commands": false,
        "mill_diameter": 0.5,
        "mill_drills": true,
        "min_copper_strip_width": 0.5,
        "spindle_speed": 10000,
        "travel_z": 1,
        "units": "MM"
    },
    "type": "cncgerber-pcb-project",
    "version": 1
}
