127 lines
2.9 KiB
C
127 lines
2.9 KiB
C
#include "DSP281x_Examples.h" // DSP281x Examples Include File
|
||
#include "DSP281x_SWPrioritizedIsrLevels.h" // DSP281x Examples Include File
|
||
#include "DSP281x_Device.h"
|
||
|
||
#include <edrk_main.h>
|
||
#include "RS_Functions.h"
|
||
#include "xp_project.h"
|
||
#include "x_wdog.h"
|
||
|
||
void main()
|
||
{
|
||
// Step 1. Initialize System Control:
|
||
// PLL, WatchDog, enable Peripheral Clocks
|
||
// This example function is found in the DSP281x_SysCtrl.c file.
|
||
InitSysCtrl();
|
||
|
||
XintfZone0_Timing();//Xilinx Zone
|
||
XintfZone6_And7_Timing();//Flash Zone
|
||
XintfZone2_Timing();//External RAM Zone
|
||
|
||
// Step 2. Initalize GPIO:
|
||
// This example function is found in the DSP281x_Gpio.c file and
|
||
// illustrates how to set the GPIO to it's default state.
|
||
// InitGpio(); // Skipped for this example
|
||
|
||
// For this example use the following configuration:
|
||
//Gpio_select();
|
||
|
||
// Step 3. Clear all interrupts and initialize PIE vector table:
|
||
// Disable CPU interrupts
|
||
DINT;
|
||
|
||
// status_interrupts = __disable_interrupts();
|
||
|
||
// Initialize PIE control registers to their default state.
|
||
// The default state is all PIE interrupts disabled and flags
|
||
// are cleared.
|
||
// This function is found in the DSP281x_PieCtrl.c file.
|
||
|
||
InitPieCtrl();
|
||
|
||
// __disable_interrupts();
|
||
|
||
// Disable CPU interrupts and clear all CPU interrupt flags:
|
||
IER = 0x0000;
|
||
IFR = 0x0000;
|
||
|
||
// Initialize the PIE vector table with pointers to the shell Interrupt
|
||
// Service Routines (ISR).
|
||
// This will populate the entire table, even if the interrupt
|
||
// is not used in this example. This is useful for debug purposes.
|
||
// The shell ISR routines are found in DSP281x_DefaultIsr.c.
|
||
// This function is found in DSP281x_PieVect.c.
|
||
|
||
InitPieVectTable();
|
||
|
||
// Step 4. Initialize all the Device Peripherals:
|
||
// This function is found in DSP281x_InitPeripherals.c
|
||
// InitPeripherals(); // Not required for this example
|
||
|
||
FlashInit();
|
||
|
||
SetupLedsLine();
|
||
//while(1)
|
||
{
|
||
i_led2_on_off(0);
|
||
i_led1_on_off(1);
|
||
DELAY_US(500000);
|
||
i_led2_on_off(1);
|
||
i_led1_on_off(0);
|
||
DELAY_US(500000);
|
||
i_led2_on_off(0);
|
||
i_led1_on_off(0);
|
||
}
|
||
|
||
|
||
RS232_TuneUp(RS232_SPEED_A, RS232_SPEED_B);
|
||
|
||
KickDog();
|
||
|
||
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD> <20><><EFBFBD>!
|
||
edrk_init_before_main();
|
||
|
||
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> RS232
|
||
project.enable_all_interrupt();
|
||
|
||
|
||
DINT;
|
||
i_led2_on_off(1);
|
||
i_led1_on_off(1);
|
||
DELAY_US(500000);
|
||
i_led2_on_off(0);
|
||
i_led1_on_off(0);
|
||
DELAY_US(500000);
|
||
i_led2_on_off(1);
|
||
i_led1_on_off(1);
|
||
DELAY_US(500000);
|
||
i_led2_on_off(0);
|
||
i_led1_on_off(0);
|
||
DELAY_US(500000);
|
||
project.enable_all_interrupt();
|
||
|
||
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
edrk_init_before_loop();
|
||
|
||
// <20><><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD> main
|
||
for(;;)
|
||
{
|
||
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>, <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
|
||
edrk_go_main();
|
||
// <20><><EFBFBD><EFBFBD><EFBFBD> <20><> rs232
|
||
RS232_WorkingWith(1,0,0);
|
||
// static int fff=0;
|
||
// if (fff)
|
||
// {
|
||
// Answer(&rs_a, CMD_RS232_POKE);
|
||
// fff = 0;
|
||
// }
|
||
|
||
}
|
||
|
||
|
||
}
|
||
|
||
|