# SETProtocol v2 firmware port for TMS320F2812

`setp_tms2812_boot.c` implements the shared SETP v2 CAN firmware service for
F2812 projects. It owns CAN reassembly, request/response framing, firmware state,
idempotent blocks, CRC32 and SHA-256 verification. It does not include TI or
board headers.

The target application provides callbacks for classic-CAN transmission, Flash
erase/program/read, optional signature authorization, and reset. Receive ISR
code must only copy frames into a queue; call `setp_tms2812_boot_process()` from
task context.

Add these sources to a CCS project:

- `c/set-protocol/src/set_protocol.c`
- `c/set-protocol/src/set_can.c`
- `c/set-protocol/src/set_firmware.c`
- `c/set-protocol/ports/tms320f2812/setp_tms2812_boot.c`

Add `c/set-protocol/include` and this directory to include paths. The port uses
extended 29-bit SETP CAN identifiers and supports one firmware slot. A single
slot has no power-loss rollback; production hardware should provide staging or
A/B storage.