Добавить порт SETProtocol v2 для TMS320F2812

c/set-protocol/ports/tms320f2812/README.md

@@ -0,0 +1,23 @@
+# SETProtocol v2 firmware port for TMS320F2812
+
+`setp_tms2812_boot.c` implements the shared SETP v2 CAN firmware service for
+F2812 projects. It owns CAN reassembly, request/response framing, firmware state,
+idempotent blocks, CRC32 and SHA-256 verification. It does not include TI or
+board headers.
+
+The target application provides callbacks for classic-CAN transmission, Flash
+erase/program/read, optional signature authorization, and reset. Receive ISR
+code must only copy frames into a queue; call `setp_tms2812_boot_process()` from
+task context.
+
+Add these sources to a CCS project:
+
+- `c/set-protocol/src/set_protocol.c`
+- `c/set-protocol/src/set_can.c`
+- `c/set-protocol/src/set_firmware.c`
+- `c/set-protocol/ports/tms320f2812/setp_tms2812_boot.c`
+
+Add `c/set-protocol/include` and this directory to include paths. The port uses
+extended 29-bit SETP CAN identifiers and supports one firmware slot. A single
+slot has no power-loss rollback; production hardware should provide staging or
+A/B storage.