работает слейв и мастер

2026-05-28 03:20:13 +03:00
commit cbb571f124
191 changed files with 55316 additions and 0 deletions
--- a/docs/PROJECT_NOTES.md
+++ b/docs/PROJECT_NOTES.md
@@ -0,0 +1,300 @@
+# STM32WB55 Zigbee master/slave notes
+
+## Project files
+
+- Keil project: `MDK-ARM/Zigbee_OnOff_Server_Coord.uvprojx`
+- Main app config: `App/app_config.h`
+- Shared data types: `App/app_types.h`
+- GPIO/hardware layer: `App/hardware.c`
+- Slave input scan/debounce: `App/slave_inputs.c`
+- App role/process logic: `App/zigbee_app.c`
+- Zigbee adapter: `App/zigbee_port.c`
+- STM32_WPAN Zigbee implementation: `STM32_WPAN/App/app_zigbee.c`
+
+## Roles
+
+Role is selected at build time while role detect is disabled:
+
+```c
+#define APP_ROLE_DEFAULT        APP_ROLE_MASTER
+#define APP_ROLE_DETECT_ENABLED 0U
+```
+
+For the slave firmware build:
+
+```c
+#define APP_ROLE_DEFAULT        APP_ROLE_SLAVE
+```
+
+`APP_ROLE_MASTER` forms the Zigbee network as coordinator.
+`APP_ROLE_SLAVE` joins the coordinator network and sends input reports.
+
+## Pins
+
+Button inputs:
+
+| Signal | Port | Pin | Active level |
+| --- | --- | --- | --- |
+| Button 1 | GPIOB | GPIO_PIN_0 | 0 |
+| Button 2 | GPIOB | GPIO_PIN_1 | 0 |
+| Button 3 | GPIOB | GPIO_PIN_2 | 0 |
+
+Config:
+
+```c
+#define APP_BUTTON_ACTIVE_LEVEL 0U
+#define APP_BUTTON_DEBOUNCE_MS  20U
+#define APP_BUTTON_GPIO_PORT    GPIOB
+#define APP_BUTTON1_GPIO_PIN    GPIO_PIN_0
+#define APP_BUTTON2_GPIO_PIN    GPIO_PIN_1
+#define APP_BUTTON3_GPIO_PIN    GPIO_PIN_2
+```
+
+Role/status LED:
+
+| Signal | Port | Pin | Active level |
+| --- | --- | --- | --- |
+| APP_ROLE_LED | GPIOE | GPIO_PIN_4 | GPIO_PIN_SET |
+
+Config:
+
+```c
+#define APP_ROLE_LED_GPIO_PORT    GPIOE
+#define APP_ROLE_LED_GPIO_PIN     GPIO_PIN_4
+#define APP_ROLE_LED_ACTIVE_LEVEL GPIO_PIN_SET
+```
+
+Role detect pins are currently unused:
+
+```c
+#define APP_ROLE_DETECT_ENABLED      0U
+#define APP_ROLE_DETECT_GPIO_PORT    GPIOA
+#define APP_ROLE_DETECT_GPIO_PIN     GPIO_PIN_9
+#define APP_ROLE_DETECT_PULL         GPIO_PULLDOWN
+#define APP_ROLE_DETECT_MASTER_LEVEL GPIO_PIN_RESET
+```
+
+ADC is reserved in the app model, but `Hardware_ReadAnalogRaw()` currently returns `0`.
+
+## Zigbee network settings
+
+```c
+#define APP_ZIGBEE_ENDPOINT           10U
+#define APP_ZIGBEE_CLUSTER_INPUTS     0xFC10U
+#define APP_ZIGBEE_REPORT_PERIOD_MS   100U
+#define APP_ZIGBEE_CHANNEL            20U
+#define APP_ZIGBEE_PAN_ID             0x1234U
+#define APP_ZIGBEE_EXTENDED_PAN_ID    0x1122334455667788ULL
+#define APP_ZIGBEE_PERMIT_JOIN_SEC    0xFFU
+#define APP_ZIGBEE_PERMIT_REFRESH_MS  5000U
+#define APP_ZIGBEE_REJOIN_FAIL_COUNT  3U
+#define APP_ZIGBEE_REJOIN_RETRY_MS    15000U
+```
+
+Master opens permit-join and refreshes it every 5 seconds.
+Slave sends reports to coordinator short address `0x0000`, endpoint `APP_ZIGBEE_ENDPOINT`.
+
+Current slave TX options:
+
+```c
+ZB_APSDE_DATAREQ_TXOPTIONS_SECURITY | ZB_APSDE_DATAREQ_TXOPTIONS_ACK
+```
+
+ACK is enabled so slave can detect `ZB_APS_STATUS_NO_ACK` when master is missing.
+
+## Slave input data
+
+Local slave input state:
+
+```c
+typedef struct
+{
+    AppButton_t buttons[3];
+    AppAnalogChannel_t analog;
+    uint32_t sequence;
+} AppSlaveInputs_t;
+```
+
+Report sent over Zigbee:
+
+```c
+typedef struct
+{
+    uint32_t sequence;
+    uint8_t button_mask;
+    uint16_t analog_raw;
+    uint8_t analog_percent;
+} AppSlaveReport_t;
+```
+
+Button mask bits:
+
+| Bit | Button |
+| --- | --- |
+| bit0 | Button 1 |
+| bit1 | Button 2 |
+| bit2 | Button 3 |
+
+Examples:
+
+| button_mask | Meaning |
+| --- | --- |
+| 0 | No buttons pressed |
+| 1 | Button 1 |
+| 2 | Button 2 |
+| 4 | Button 3 |
+| 3 | Button 1 + Button 2 |
+| 7 | All 3 buttons |
+
+Wire payload, 8 bytes:
+
+| Byte | Field |
+| --- | --- |
+| 0..3 | sequence, little-endian |
+| 4 | button_mask |
+| 5..6 | analog_raw, little-endian |
+| 7 | analog_percent |
+
+Master stores the last received report here:
+
+```c
+g_app.master_node.last_report
+g_app.master_node.last_report.button_mask
+```
+
+## Connection behavior
+
+Master `APP_ZB_CONNECTED` means the coordinator formed its Zigbee network.
+It does not mean that slave is online.
+
+Slave is considered visible on master only after first report:
+
+```c
+g_app.master_node.online = true;
+watch_master_online = 1;
+watch_report_rx_count++;
+```
+
+When master is turned off while slave is running:
+
+1. Slave TX confirm starts returning `0xA7` (`ZB_APS_STATUS_NO_ACK`).
+2. `watch_report_tx_fail_streak` increases.
+3. After `APP_ZIGBEE_REJOIN_FAIL_COUNT` failures, slave resets local Zigbee stack with `ZbReset()`.
+4. Slave starts normal join again through `CFG_TASK_ZIGBEE_NETWORK_FORM`.
+
+When slave is reset while master is running:
+
+1. Master must keep permit-join open.
+2. Check `watch_permit_join_count`, `watch_permit_join_status`, and `watch_permit_join_duration` on master.
+3. Expected values: count increases, status `0`, duration `0xFF`.
+
+## LED status patterns
+
+LED: `APP_ROLE_LED` on GPIOE pin 4.
+
+Patterns are non-blocking and updated from `ZigbeeApp_UpdateStatusLed()`.
+
+| State | Pattern |
+| --- | --- |
+| DISCONNECTED | Short flash every 400 ms |
+| JOINING | Fast 80 ms on / 80 ms off |
+| ERROR | Very fast 50 ms on / 50 ms off |
+| CONNECTED master | One short flash every second |
+| CONNECTED slave | Two short flashes every second |
+
+## Useful watch variables
+
+Role/state:
+
+```c
+watch_role
+watch_is_master
+watch_is_slave
+watch_zigbee_state
+watch_zigbee_ready
+```
+
+Master receive:
+
+```c
+watch_master_online
+watch_master_last_seen_ms
+watch_master_last_sequence
+watch_master_button_mask
+watch_report_rx_count
+watch_report_rx_ind_count
+watch_report_rx_decode_fail_count
+watch_report_rx_last_cluster
+watch_report_rx_last_length
+```
+
+Slave transmit:
+
+```c
+watch_slave_sequence
+watch_slave_button_mask
+watch_report_tx_count
+watch_report_tx_attempt_count
+watch_report_tx_ok_count
+watch_report_tx_busy_count
+watch_report_tx_confirm_count
+watch_report_tx_confirm_status
+watch_report_tx_fail_streak
+```
+
+Rejoin/recovery:
+
+```c
+watch_rejoin_request_count
+watch_rejoin_success_count
+watch_rejoin_fail_count
+watch_rejoin_active
+watch_rejoin_last_status
+```
+
+Master permit-join:
+
+```c
+watch_permit_join_count
+watch_permit_join_status
+watch_permit_join_duration
+```
+
+## Common status codes
+
+| Code | Meaning |
+| --- | --- |
+| 0x00 | Success |
+| 0xA7 | `ZB_APS_STATUS_NO_ACK`, destination did not ACK |
+| 0xCA | `ZB_NWK_STATUS_NO_NETWORKS`, no matching network found |
+| 0xD0 | `ZB_NWK_STATUS_ROUTE_DISCOVERY_FAILED` |
+| 0xD1 | `ZB_NWK_STATUS_ROUTE_ERROR` |
+
+## Current debug checklist
+
+Master after startup:
+
+```text
+watch_is_master = 1
+watch_zigbee_state = 2
+watch_permit_join_count increasing
+watch_permit_join_status = 0
+watch_permit_join_duration = 0xFF
+```
+
+Slave after join:
+
+```text
+watch_is_slave = 1
+watch_zigbee_state = 2
+watch_zigbee_ready = 1
+watch_report_tx_confirm_status = 0
+```
+
+Master after receiving slave:
+
+```text
+watch_master_online = 1
+watch_report_rx_count increasing
+watch_master_button_mask follows slave buttons
+```