Andrey/Diod_Test
2
0
Fork 0
Code Issues 5 Pull Requests Actions Packages Projects Releases Wiki Activity

Добавлены библиотеки adc, modbus (его надо проверить)

Browse Source 
В библиотеке adc пока только сделана заготовка для считывания выброса, надо доделать:
Пока в main крутиться тест: формирование импульса ножкой светодиодом и считыание АЦП. Считывается этот импульс и определяется его пик (максимальное значение) и в районе этого пика беруться значения для расчета его амплитуды

Modbus добавлен но не проверен
This commit is contained in:
Razvalyaev 2024-12-17 18:24:41 +03:00
parent 580bac9f52
commit a2043006cc
35 changed files with 12115 additions and 85 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
diode_tester/.mxproject
View File

File diff suppressed because one or more lines are too long

2
diode_tester/Core/Inc/stm32f1xx_hal_conf.h
View File

@ -65,7 +65,7 @@
/*#define HAL_SPI_MODULE_ENABLED */ /*#define HAL_SPI_MODULE_ENABLED */
/*#define HAL_SRAM_MODULE_ENABLED */ /*#define HAL_SRAM_MODULE_ENABLED */
#define HAL_TIM_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED
/*#define HAL_UART_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED
/*#define HAL_USART_MODULE_ENABLED */ /*#define HAL_USART_MODULE_ENABLED */
/*#define HAL_WWDG_MODULE_ENABLED */ /*#define HAL_WWDG_MODULE_ENABLED */

2
diode_tester/Core/Inc/stm32f1xx_it.h
View File

@ -56,7 +56,9 @@ void DebugMon_Handler(void);
void PendSV_Handler(void); void PendSV_Handler(void);
void SysTick_Handler(void); void SysTick_Handler(void);
void DMA1_Channel1_IRQHandler(void); void DMA1_Channel1_IRQHandler(void);
void TIM2_IRQHandler(void);
void TIM3_IRQHandler(void); void TIM3_IRQHandler(void);
void USART1_IRQHandler(void);
/* USER CODE BEGIN EFP */ /* USER CODE BEGIN EFP */
/* USER CODE END EFP */ /* USER CODE END EFP */

3
diode_tester/Core/Inc/tim.h
View File

@ -32,12 +32,15 @@ extern "C" {
/* USER CODE END Includes */ /* USER CODE END Includes */
extern TIM_HandleTypeDef htim2;
extern TIM_HandleTypeDef htim3; extern TIM_HandleTypeDef htim3;
/* USER CODE BEGIN Private defines */ /* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */ /* USER CODE END Private defines */
void MX_TIM2_Init(void);
void MX_TIM3_Init(void); void MX_TIM3_Init(void);
/* USER CODE BEGIN Prototypes */ /* USER CODE BEGIN Prototypes */

52
diode_tester/Core/Inc/usart.h Normal file
View File

@ -0,0 +1,52 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file usart.h
* @brief This file contains all the function prototypes for
* the usart.c file
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USART_H__
#define __USART_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
extern UART_HandleTypeDef huart1;
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_USART1_UART_Init(void);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /* __USART_H__ */

116
diode_tester/Core/Interfaces/crc_algs.c Normal file
View File

@ -0,0 +1,116 @@
#include "crc_algs.h"
uint32_t CRC_calc;
uint32_t CRC_ref;
//uint16_t CRC_calc;
//uint16_t CRC_ref;
// left this global for debug
uint8_t uchCRCHi = 0xFF;
uint8_t uchCRCLo = 0xFF;
unsigned uIndex;
uint32_t crc32(uint8_t *data, uint32_t data_size)
{
static const unsigned int crc32_table[] =
{
0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
};
unsigned int crc = 0xFFFFFFFF;
while (data_size--)
{
crc = (crc >> 8) ^ crc32_table[(crc ^ *data) & 255];
data++;
}
return crc^0xFFFFFFFF;
}
uint16_t crc16(uint8_t *data, uint32_t data_size)
{
/*Table of CRC values for high order byte*/
static unsigned char auchCRCHi[]=
{
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,
0x00,0xC1,0x81,0x40,0x01,0xC0,0x80,0x41,0x01,0xC0,0x80,0x41,0x00,0xC1,0x81,0x40,
};
/*Table of CRC values for low order byte*/
static char auchCRCLo[] =
{
0x00,0xC0,0xC1,0x01,0xC3,0x03,0x02,0xC2,0xC6,0x06,0x07,0xC7,0x05,0xC5,0xC4,0x04,
0xCC,0x0C,0x0D,0xCD,0x0F,0xCF,0xCE,0x0E,0x0A,0xCA,0xCB,0x0B,0xC9,0x09,0x08,0xC8,
0xD8,0x18,0x19,0xD9,0x1B,0xDB,0xDA,0x1A,0x1E,0xDE,0xDF,0x1F,0xDD,0x1D,0x1C,0xDC,
0x14,0xD4,0xD5,0x15,0xD7,0x17,0x16,0xD6,0xD2,0x12,0x13,0xD3,0x11,0xD1,0xD0,0x10,
0xF0,0x30,0x31,0xF1,0x33,0xF3,0xF2,0x32,0x36,0xF6,0xF7,0x37,0xF5,0x35,0x34,0xF4,
0x3C,0xFC,0xFD,0x3D,0xFF,0x3F,0x3E,0xFE,0xFA,0x3A,0x3B,0xFB,0x39,0xF9,0xF8,0x38,
0x28,0xE8,0xE9,0x29,0xEB,0x2B,0x2A,0xEA,0xEE,0x2E,0x2F,0xEF,0x2D,0xED,0xEC,0x2C,
0xE4,0x24,0x25,0xE5,0x27,0xE7,0xE6,0x26,0x22,0xE2,0xE3,0x23,0xE1,0x21,0x20,0xE0,
0xA0,0x60,0x61,0xA1,0x63,0xA3,0xA2,0x62,0x66,0xA6,0xA7,0x67,0xA5,0x65,0x64,0xA4,
0x6C,0xAC,0xAD,0x6D,0xAF,0x6F,0x6E,0xAE,0xAA,0x6A,0x6B,0xAB,0x69,0xA9,0xA8,0x68,
0x78,0xB8,0xB9,0x79,0xBB,0x7B,0x7A,0xBA,0xBE,0x7E,0x7F,0xBF,0x7D,0xBD,0xBC,0x7C,
0xB4,0x74,0x75,0xB5,0x77,0xB7,0xB6,0x76,0x72,0xB2,0xB3,0x73,0xB1,0x71,0x70,0xB0,
0x50,0x90,0x91,0x51,0x93,0x53,0x52,0x92,0x96,0x56,0x57,0x97,0x55,0x95,0x94,0x54,
0x9C,0x5C,0x5D,0x9D,0x5F,0x9F,0x9E,0x5E,0x5A,0x9A,0x9B,0x5B,0x99,0x59,0x58,0x98,
0x88,0x48,0x49,0x89,0x4B,0x8B,0x8A,0x4A,0x4E,0x8E,0x8F,0x4F,0x8D,0x4D,0x4C,0x8C,
0x44,0x84,0x85,0x45,0x87,0x47,0x46,0x86,0x82,0x42,0x43,0x83,0x41,0x81,0x80,0x40,
};
uchCRCHi = 0xFF;
uchCRCLo = 0xFF;
/* CRC Generation Function */
while( data_size--) /* pass through message buffer */
{
uIndex = uchCRCHi ^ *data++; /* calculate the CRC */
uchCRCHi = uchCRCLo ^ auchCRCHi[uIndex];
uchCRCLo = auchCRCLo[uIndex];
}
return uchCRCHi | uchCRCLo<<8;
}

9
diode_tester/Core/Interfaces/crc_algs.h Normal file
View File

@ -0,0 +1,9 @@
#include "mylibs_include.h"
// extern here to use in bootloader.c
extern uint32_t CRC_calc;
extern uint32_t CRC_ref;
uint16_t crc16(uint8_t *data, uint32_t data_size);
uint32_t crc32(uint8_t *data, uint32_t data_size);

125
diode_tester/Core/Interfaces/interface_config.h Normal file
View File

@ -0,0 +1,125 @@
/**
**************************************************************************
* @file interface_config.h
* @brief Конфигурации для интерфейсов
**************************************************************************
* @defgroup INTERFACE_CONFIGS Configs for interfaces
* @brief Конфигурации для интерфейсов
* @details
@{
*************************************************************************/
#ifndef _INTERFACE_CONFIG_H_
#define _INTERFACE_CONFIG_H_
/**
* @addtogroup MODBUS_CONFIG Конфигурации для модбас
* @ingroup INTERFACE_CONFIGS
* @ingroup MODBUS
@{
*/
#define MODBUS_UART_NUMB 3 ///< Номер используемого UART, по нему выставляется дефайн USED_MB_UART = USARTx
#define MODBUS_SPEED 115200 ///< Скорость UART для модбас
#define MODBUS_GPIOX GPIOB ///< Порт для UART RX/TX
#define MODBUS_GPIO_PIN_RX GPIO_PIN_11 ///< Пин для UART RX
#define MODBUS_GPIO_PIN_TX GPIO_PIN_10 ///< Пин для UART TX
#define MODBUS_TIM_NUMB 7 ///< number of used tim, accord to this define sets define USED_MB_TIM = TIMx
#define MODBUS_TIM_AHB_FREQ 72 ///< TIM AHB Bus Freq
// defines for modbus behaviour
#define MODBUS_DEVICE_ID 1 ///< девайс текущего устройства
#define MODBUS_MAX_TIMEOUT 5000 ///< максимальнйы тайтаут MB is ms
#define RS_UART_Init MX_USART1_UART_Init
#define RS_UART_DeInit HAL_UART_MspDeInit
#define RS_TIM_Init MX_TIM2_Init
#define RS_TIM_DeInit HAL_TIM_Base_MspDeInit
#define rs_huart huart1
#define rs_htim htim2
/////////////////////////////////////////////////////////////////////
/////////////////////////---CALC DEFINES---//////////////////////////
/* set USART_TypeDef for choosen numb of usart */
#if (MODBUS_UART_NUMB == 1)
#define USED_MODBUS_UART USART1
#define USE_USART1
#elif (MODBUS_UART_NUMB == 2)
#define USED_MODBUS_UART USART2
#define USE_USART2
#elif (MODBUS_UART_NUMB == 3)
#define USED_MODBUS_UART USART3
#define USE_USART3
#elif (MODBUS_UART_NUMB == 4)
#define USED_MODBUS_UART UART4
#define USE_UART4
#elif (MODBUS_UART_NUMB == 5)
#define USED_MODBUS_UART UART5
#define USE_UART6
#elif (MODBUS_UART_NUMB == 6)
#define USED_MODBUS_UART USART6
#define USE_USART6
#endif
#if (MODBUS_TIM_NUMB == 1)
#define USED_MODBUS_TIM TIM1
#define USE_TIM1
#elif (MODBUS_TIM_NUMB == 2)
#define USED_MODBUS_TIM TIM2
#define USE_TIM2
#elif (MODBUS_TIM_NUMB == 3)
#define USED_MODBUS_TIM TIM3
#define USE_TIM3
#elif (MODBUS_TIM_NUMB == 4)
#define USED_MODBUS_TIM TIM4
#define USE_TIM4
#elif (MODBUS_TIM_NUMB == 5)
#define USED_MODBUS_TIM TIM5
#define USE_TIM5
#elif (MODBUS_TIM_NUMB == 6)
#define USED_MODBUS_TIM TIM6
#define USE_TIM6
#elif (MODBUS_TIM_NUMB == 7)
#define USED_MODBUS_TIM TIM7
#define USE_TIM7
#elif (MODBUS_TIM_NUMB == 8)
#define USED_MODBUS_TIM TIM8
#define USE_TIM8
#elif (MODBUS_TIM_NUMB == 9)
#define USED_MODBUS_TIM TIM9
#define USE_TIM9
#elif (MODBUS_TIM_NUMB == 10)
#define USED_MODBUS_TIM TIM10
#define USE_TIM10
#elif (MODBUS_TIM_NUMB == 11)
#define USED_MODBUS_TIM TIM11
#define USE_TIM11
#elif (MODBUS_TIM_NUMB == 12)
#define USED_MODBUS_TIM TIM12
#define USE_TIM12
#elif (MODBUS_TIM_NUMB == 13)
#define USED_MODBUS_TIM TIM13
#define USE_TIM13
#elif (MODBUS_TIM_NUMB == 14)
#define USED_MODBUS_TIM TIM14
#define USE_TIM14
#endif
/** MODBUS_CONFIG
* @}
*/
/** INTERFACE_CONFIGS
* @}
*/
#endif //_INTERFACE_CONFIG_H_

938
diode_tester/Core/Interfaces/modbus.c Normal file
View File

@ -0,0 +1,938 @@
/**
**************************************************************************
* @file modbus.c
* @brief Модуль для реализации MODBUS.
**************************************************************************
* @par Функции и дефайны
*
* Defines: data access
* - MB_Set_Coil_Local() - Выставление коила по локальному адресу относительно начала массива
* - MB_Reset_Coil_Local() - Сброс коила по локальному адресу относительно начала массива
* - MB_Toogle_Coil_Local() - Переключение коила по локальному адресу относительно начала массива
* - MB_Read_Coil_Local() - Чтение коила по локальному адресу относительно начала массива
*
* Functions: data access
* - MB_Write_Coil_Global() - Запись 0/1 в один коил по глобальному адресу
* - MB_Read_Coil_Global() - Чтение одного коила по глобальному адресу
*
* Functions: process message
* - MB_DefineRegistersAddress() - Определение "начального" адреса регистров
* - MB_DefineCoilsAddress() - Определение "начального" адреса коилов
* - MB_Check_Address_For_Arr() - Определение принадлежит ли адресс Addr конкретному массиву
* - Обработка команд модбас
* - MB_Read_Coils(),
* - MB_Read_Hold_Regs(),
* - MB_Write_Single_Coil()
* - MB_Write_Miltuple_Coils()
* - MB_Write_Miltuple_Regs()
*
* Functions: RS functions
* - RS_Parse_Message() / RS_Collect_Message() - Заполнение структуры сообщения и буфера
* - RS_Response() - Ответ на комманду
* - RS_Define_Size_of_RX_Message() - Определение размера принимаемых данных
* - RS_Init() - Инициализация периферии и modbus handler
*
* Functions: initialization
* - MODBUS_FirstInit() - Инициализация modbus
*
**************************************************************************
* @par Данные для модбас
*
* Holding/Input Registers
* - Регистры представляют собой 16-битные числа (слова). В обработке комманд
* находится адресс "начального" регистра и записывается в указатель. Доступ к
* остальным регистрам осуществляется через указатель. Таким образом, сами
* регистры могут представлять собой как массив так и структуру.
*
* Coils
* - Коилы представляют собой биты, упакованные в 16-битные регистры. В обработке
* комманд находится адресс "начального" регистра запрашиваемого коила. Доступ к
* остальным коилам осуществляется через маску и указатель. Таким образом, сами
* коилы могут представлять собой как массив так и структуру.
*
@verbatim
EXAMPLE: INIT SLAVE RECEIVE
//--------------Настройка модбас--------------//
// set up UART for modbus
modbus1_suart.huart.Instance = USED_MODBUS_UART;
modbus1_suart.huart.Init.BaudRate = PROJSET.MB_SPEED;
modbus1_suart.GPIOx = GPIOB;
modbus1_suart.GPIO_PIN_RX = GPIO_PIN_11;
modbus1_suart.GPIO_PIN_TX = GPIO_PIN_10;
// set up timeout TIM for modbus
modbus1_stim.htim.Instance = TIM7;
modbus1_stim.sTimAHBFreqMHz = 84;
modbus1_stim.sTimMode = TIM_IT_CONF;
// set up modbus: MB_RX_Size_NotConst and Timeout enable
hmodbus1.ID = 1;
hmodbus1.sRS_Timeout = 5000;
hmodbus1.sRS_Mode = SLAVE_ALWAYS_WAIT;
hmodbus1.sRS_RX_Size_Mode = RS_RX_Size_NotConst;
// INIT
hmodbus1.RS_STATUS = RS_Init(&hmodbus1, &modbus1_suart, &modbus1_stim, 0);
//----------------Прием модбас----------------//
RS_MsgTypeDef MODBUS_MSG;
RS_Receive_IT(&hmodbus1, &MODBUS_MSG);
@endverbatim
*************************************************************************/
#include "rs_message.h"
uint32_t dbg_temp, dbg_temp2, dbg_temp3; // for debug
/* MODBUS HANDLES */
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
UART_SettingsTypeDef modbus1_suart;
TIM_SettingsTypeDef modbus1_stim;
#else
extern UART_HandleTypeDef rs_huart;
extern TIM_HandleTypeDef rs_htim;
#endif
RS_HandleTypeDef hmodbus1;
/* DEFINE REGISTERS/COILS */
MB_DataStructureTypeDef MB_DATA;
RS_MsgTypeDef MODBUS_MSG;
uint32_t delay_scide = 1;
uint32_t numb_scide = 10;
//-------------------------------------------------------------------
//-----------------------------FOR USER------------------------------
/**
* @brief First set up of MODBUS.
* @details Первый инит модбас. Заполняет структуры и инициализирует таймер и юарт для общения по модбас.
* Скважность ШИМ меняется по закону синусоиды, каждый канал генерирует свой полупериод синуса (от -1 до 0 И от 0 до 1)
* ШИМ генерируется на одном канале.
* @note This called from main
*/
void MODBUS_FirstInit(void)
{
//-----------SETUP MODBUS-------------
// set up UART for modbus
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
modbus1_suart.huart.Instance = USED_MODBUS_UART;
modbus1_suart.huart.Init.BaudRate = MODBUS_SPEED;
modbus1_suart.GPIOx = MODBUS_GPIOX;
modbus1_suart.GPIO_PIN_RX = MODBUS_GPIO_PIN_RX;
modbus1_suart.GPIO_PIN_TX = MODBUS_GPIO_PIN_TX;
// set up timeout TIM for modbus
modbus1_stim.htim.Instance = USED_MODBUS_TIM;
modbus1_stim.sTimAHBFreqMHz = MODBUS_TIM_AHB_FREQ;
modbus1_stim.sTimMode = TIM_IT_CONF;
#endif
// set up modbus: MB_RX_Size_NotConst and Timeout enable
hmodbus1.ID = MODBUS_DEVICE_ID;
hmodbus1.sRS_Timeout = MODBUS_MAX_TIMEOUT;
hmodbus1.sRS_Mode = SLAVE_ALWAYS_WAIT;
hmodbus1.sRS_RX_Size_Mode = RS_RX_Size_NotConst;
// INIT
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
hmodbus1.RS_STATUS = RS_Init(&hmodbus1, &modbus1_suart, &modbus1_stim, 0);
#else
hmodbus1.RS_STATUS = RS_Init(&hmodbus1, &rs_huart, &rs_htim, 0);
#endif
RS_EnableReceive();
}
/**
* @brief Set or Reset Coil at its global address.
* @param Addr - адрес коила.
* @param WriteVal - Что записать в коил: 0 или 1.
* @return ExceptionCode - Код исключения если коила по адресу не существует, и NO_ERRORS если все ок.
*
* @details Позволяет обратиться к любому коилу по его глобальному адрессу.
Вне зависимости от того как коилы размещены в памяти.
*/
MB_ExceptionTypeDef MB_Write_Coil_Global(uint16_t Addr, MB_CoilsOpTypeDef WriteVal)
{
//---------CHECK FOR ERRORS----------
MB_ExceptionTypeDef Exception = NO_ERRORS;
uint16_t *coils;
uint16_t start_shift = 0; // shift in coils register
//------------WRITE COIL-------------
Exception = MB_DefineCoilsAddress(&coils, Addr, 1, &start_shift, 1);
if(Exception == NO_ERRORS)
{
switch(WriteVal)
{
case SET_COIL:
*coils |= (1<<start_shift);
break;
case RESET_COIL:
*coils &= ~(1<<start_shift);
break;
case TOOGLE_COIL:
*coils ^= (1<<start_shift);
break;
}
}
return Exception;
}
/**
* @brief Read Coil at its global address.
* @param Addr - адрес коила.
* @param Exception - Указатель на переменную для кода исключения, в случа неудачи при чтении.
* @return uint16_t - Возвращает весь регистр с маской на запрошенном коиле.
*
* @details Позволяет обратиться к любому коилу по его глобальному адрессу.
Вне зависимости от того как коилы размещены в памяти.
*/
uint16_t MB_Read_Coil_Global(uint16_t Addr, MB_ExceptionTypeDef *Exception)
{
//---------CHECK FOR ERRORS----------
MB_ExceptionTypeDef Exception_tmp;
if(Exception == NULL) // if exception is not given to func fill it
Exception = &Exception_tmp;
uint16_t *coils;
uint16_t start_shift = 0; // shift in coils register
//------------READ COIL--------------
*Exception = MB_DefineCoilsAddress(&coils, Addr, 1, &start_shift, 0);
if(*Exception == NO_ERRORS)
{
return ((*coils)&(1<<start_shift));
}
else
{
return 0;
}
}
//-------------------------------------------------------------------
//----------------FUNCTIONS FOR PROCESSING MESSAGE-------------------
/**
* @brief Check is address valid for certain array.
* @param Addr - начальный адресс.
* @param Qnt - количество запрашиваемых элементов.
* @param R_ARR_ADDR - начальный адресс массива R_ARR.
* @param R_ARR_NUMB - количество элементов в массиве R_ARR.
* @return ExceptionCode - ILLEGAL DATA ADRESS если адресс недействителен, и NO_ERRORS если все ок.
*
* @details Позволяет определить, принадлежит ли адресс Addr массиву R_ARR:
* Если адресс Addr находится в диапазоне адрессов массива R_ARR, то возвращаем NO_ERROR.
* Если адресс Addr находится за пределами адрессов массива R_ARR - ILLEGAL_DATA_ADDRESSю.
*/
MB_ExceptionTypeDef MB_Check_Address_For_Arr(uint16_t Addr, uint16_t Qnt, uint16_t R_ARR_ADDR, uint16_t R_ARR_NUMB)
{
// if address from this array
if(Addr >= R_ARR_ADDR)
{
// if quantity too big return error
if ((Addr - R_ARR_ADDR) + Qnt > R_ARR_NUMB)
{
return ILLEGAL_DATA_ADDRESS; // return exception code
}
// if all ok - return no errors
return NO_ERRORS;
}
// if address isnt from this array return error
else
return ILLEGAL_DATA_ADDRESS; // return exception code
}
/**
* @brief Define Address Origin for Input/Holding Registers
* @param pRegs - указатель на указатель регистров.
* @param Addr - адрес начального регистра.
* @param Qnt - количество запрашиваемых регистров.
* @param WriteFlag - флаг регистр нужны для чтения или записи.
* @return ExceptionCode - Код исключения если есть, и NO_ERRORS если нет.
*
* @details Определение адреса начального регистра.
* @note WriteFlag пока не используется.
*/
MB_ExceptionTypeDef MB_DefineRegistersAddress(uint16_t **pRegs, uint16_t Addr, uint16_t Qnt, uint8_t RegisterType)
{
/* check quantity error */
if (Qnt > 125)
{
return ILLEGAL_DATA_VALUE; // return exception code
}
if(RegisterType == RegisterType_Holding)
{
// Устаки для напряжений ТЭ: предупреждения аварии
if(MB_Check_Address_For_Arr(Addr, Qnt, R_SETPOINTS_ADDR, R_SETPOINTS_QNT) == NO_ERRORS)
{
*pRegs = MB_Set_Register_Ptr(&MB_DATA.HoldRegs, Addr); // начало регистров хранения/входных
}
// Устаки для настройки МЗКТЭ: запрет опроса и настройки общения (MODBUS/UART)
else if(MB_Check_Address_For_Arr(Addr, Qnt, R_SETTINGS_ADDR, R_SETTINGS_QNT) == NO_ERRORS)
{
*pRegs = MB_Set_Register_Ptr(&MB_DATA.HoldRegs, Addr); // начало регистров хранения/входных
}
// if address doesnt match any array - return illegal data address response
else
{
return ILLEGAL_DATA_ADDRESS;
}
}
else if(RegisterType == RegisterType_Input)
{
// Напряжения на ТЭ
if(MB_Check_Address_For_Arr(Addr, Qnt, R_TE_VOLTAGE_ADDR, R_TE_VOLTAGE_QNT) == NO_ERRORS)
{
*pRegs = MB_Set_Register_Ptr(&MB_DATA.InRegs, Addr); // начало регистров хранения/входных
}
// Статус регистр МЗКТЭ
else if(MB_Check_Address_For_Arr(Addr, Qnt, R_STATUS_REG_ADDR, R_STATUS_REG_QNT) == NO_ERRORS)
{
*pRegs = MB_Set_Register_Ptr(&MB_DATA.InRegs, Addr); // начало регистров хранения/входных
}
// if address doesnt match any array - return illegal data address response
else
{
return ILLEGAL_DATA_ADDRESS;
}
}
else
{
return ILLEGAL_FUNCTION;
}
// if found requeried array return no err
return NO_ERRORS; // return no errors
}
/**
* @brief Define Address Origin for coils
* @param pCoils - указатель на указатель коилов.
* @param Addr - адресс начального коила.
* @param Qnt - количество запрашиваемых коилов.
* @param start_shift - указатель на переменную содержащую сдвиг внутри регистра для начального коила.
* @param WriteFlag - флаг коилы нужны для чтения или записи.
* @return ExceptionCode - Код исключения если есть, и NO_ERRORS если нет.
*
* @details Определение адреса начального регистра запрашиваемых коилов.
* @note WriteFlag используется для определния регистров GPIO: ODR или IDR.
*/
MB_ExceptionTypeDef MB_DefineCoilsAddress(uint16_t **pCoils, uint16_t Addr, uint16_t Qnt, uint16_t *start_shift, uint8_t WriteFlag)
{
/* check quantity error */
if (Qnt > 2000)
{
return ILLEGAL_DATA_VALUE; // return exception code
}
// peripheral control coils
if(MB_Check_Address_For_Arr(Addr, Qnt, C_TE_EXCLUDE_ADDR, C_TE_EXCLUDE_QNT) == NO_ERRORS)
{
*pCoils = MB_Set_Coil_Reg_Ptr(&MB_DATA.Coils, Addr-C_TE_EXCLUDE_ADDR);
}
// if address doesnt match any array - return illegal data address response
else
{
return ILLEGAL_DATA_ADDRESS;
}
*start_shift = Addr % 16; // set shift to requested coil
// if found requeried array return no err
return NO_ERRORS; // return no errors
}
/**
* @brief Proccess command Read Coils (01 - 0x01).
* @param modbus_msg - указатель на структуру собщения modbus.
* @return fMessageHandled - статус о результате обработки комманды.
* @details Обработка команды Read Coils.
*/
uint8_t MB_Read_Coils(RS_MsgTypeDef *modbus_msg)
{
//---------CHECK FOR ERRORS----------
uint16_t *coils;
uint16_t start_shift = 0; // shift in coils register
modbus_msg->Except_Code = MB_DefineCoilsAddress(&coils, modbus_msg->Addr, modbus_msg->Qnt, &start_shift, 0);
if(modbus_msg->Except_Code != NO_ERRORS)
return 0;
//-----------READING COIL------------
// setup output message data size
modbus_msg->ByteCnt = Divide_Up(modbus_msg->Qnt, 8);
// create mask for coils
uint16_t mask_for_coils = 0; // mask for coils that've been chosen
uint16_t setted_coils = 0; // value of setted coils
uint16_t temp_reg = 0; // temp register for saving coils that hasnt been chosen
uint16_t coil_cnt = 0; // counter for processed coils
// cycle until all registers with requered coils would be processed
int shift = start_shift; // set shift to first coil in first register
int ind = 0; // index for coils registers and data
for(; ind <= Divide_Up(start_shift + modbus_msg->Qnt, 16); ind++)
{
//----SET MASK FOR COILS REGISTER----
mask_for_coils = 0;
for(; shift < 0x10; shift++)
{
mask_for_coils |= 1<<(shift); // choose certain coil
if(++coil_cnt >= modbus_msg->Qnt)
break;
}
shift = 0; // set shift to zero for the next step
//-----------READ COILS--------------
modbus_msg->DATA[ind] = (*(coils+ind)&mask_for_coils) >> start_shift;
if(ind > 0)
modbus_msg->DATA[ind-1] |= ((*(coils+ind)&mask_for_coils) << 16) >> start_shift;
}
// т.к. DATA 16-битная, для 8-битной передачи, надо поменять местами верхний и нижний байты
for(; ind >= 0; --ind)
modbus_msg->DATA[ind] = ByteSwap16(modbus_msg->DATA[ind]);
return 1;
}
/**
* @brief Proccess command Read Holding Registers (03 - 0x03).
* @param modbus_msg - указатель на структуру собщения modbus.
* @return fMessageHandled - статус о результате обработки комманды.
* @details Обработка команды Read Holding Registers.
*/
uint8_t MB_Read_Hold_Regs(RS_MsgTypeDef *modbus_msg)
{
//---------CHECK FOR ERRORS----------
// get origin address for data
uint16_t *pHoldRegs;
modbus_msg->Except_Code = MB_DefineRegistersAddress(&pHoldRegs, modbus_msg->Addr, modbus_msg->Qnt, RegisterType_Holding); // определение адреса регистров
if(modbus_msg->Except_Code != NO_ERRORS)
return 0;
//-----------READING REGS------------
// setup output message data size
modbus_msg->ByteCnt = modbus_msg->Qnt*2; // *2 because we transmit 8 bits, not 16 bits
// read data
int i;
for (i = 0; i<modbus_msg->Qnt; i++)
{
modbus_msg->DATA[i] = *(pHoldRegs++);
}
return 1;
}
/**
* @brief Proccess command Read Input Registers (04 - 0x04).
* @param modbus_msg - указатель на структуру собщения modbus.
* @return fMessageHandled - статус о результате обработки комманды.
* @details Обработка команды Read Input Registers.
*/
uint8_t MB_Read_Input_Regs(RS_MsgTypeDef *modbus_msg)
{
//---------CHECK FOR ERRORS----------
// get origin address for data
uint16_t *pInRegs;
modbus_msg->Except_Code = MB_DefineRegistersAddress(&pInRegs, modbus_msg->Addr, modbus_msg->Qnt, RegisterType_Input); // определение адреса регистров
if(modbus_msg->Except_Code != NO_ERRORS)
return 0;
//-----------READING REGS------------
// setup output message data size
modbus_msg->ByteCnt = modbus_msg->Qnt*2; // *2 because we transmit 8 bits, not 16 bits
// read data
int i;
for (i = 0; i<modbus_msg->Qnt; i++)
{
if(*((int16_t *)pInRegs) > 0)
modbus_msg->DATA[i] = (*pInRegs++);
else
modbus_msg->DATA[i] = (*pInRegs++);
}
return 1;
}
/**
* @brief Proccess command Write Single Coils (05 - 0x05).
* @param modbus_msg - указатель на структуру собщения modbus.
* @return fMessageHandled - статус о результате обработки комманды.
* @details Обработка команды Write Single Coils.
*/
uint8_t MB_Write_Single_Coil(RS_MsgTypeDef *modbus_msg)
{
//---------CHECK FOR ERRORS----------
if ((modbus_msg->Qnt != 0x0000) && (modbus_msg->Qnt != 0xFF00))
{
modbus_msg->Except_Code = ILLEGAL_DATA_VALUE;
return 0;
}
// define position of coil
uint16_t *coils;
uint16_t start_shift = 0; // shift in coils register
modbus_msg->Except_Code = MB_DefineCoilsAddress(&coils, modbus_msg->Addr, 0, &start_shift, 1);
if(modbus_msg->Except_Code != NO_ERRORS)
return 0;
//----------WRITTING COIL------------
if(modbus_msg->Qnt == 0xFF00)
*(coils) |= 1<<start_shift; // write flags corresponding to received data
else
*(coils) &= ~(1<<start_shift); // write flags corresponding to received data
return 1;
}
/**
* @brief Proccess command Write Single Register (06 - 0x06).
* @param modbus_msg - указатель на структуру собщения modbus.
* @return fMessageHandled - статус о результате обработки комманды.
* @details Обработка команды Write Single Register.
*/
uint8_t MB_Write_Single_Reg(RS_MsgTypeDef *modbus_msg)
{
// get origin address for data
uint16_t *pHoldRegs;
modbus_msg->Except_Code = MB_DefineRegistersAddress(&pHoldRegs, modbus_msg->Addr, 1, RegisterType_Holding); // определение адреса регистров
if(modbus_msg->Except_Code != NO_ERRORS)
return 0;
//-----------WRITTING REG------------
*(pHoldRegs) = modbus_msg->Qnt;
return 1;
}
/**
* @brief Proccess command Write Multiple Coils (15 - 0x0F).
* @param modbus_msg - указатель на структуру собщения modbus.
* @return fMessageHandled - статус о результате обработки комманды.
* @details Обработка команды Write Multiple Coils.
*/
uint8_t MB_Write_Miltuple_Coils(RS_MsgTypeDef *modbus_msg)
{
//---------CHECK FOR ERRORS----------
if (modbus_msg->ByteCnt != Divide_Up(modbus_msg->Qnt, 8))
{ // if quantity too large OR if quantity and bytes count arent match
modbus_msg->Except_Code = ILLEGAL_DATA_VALUE;
return 0;
}
// define position of coil
uint16_t *coils; // pointer to coils
uint16_t start_shift = 0; // shift in coils register
modbus_msg->Except_Code = MB_DefineCoilsAddress(&coils, modbus_msg->Addr, modbus_msg->Qnt, &start_shift, 1);
if(modbus_msg->Except_Code != NO_ERRORS)
return 0;
//----------WRITTING COILS-----------
// create mask for coils
uint16_t mask_for_coils = 0; // mask for coils that've been chosen
uint32_t setted_coils = 0; // value of setted coils
uint16_t temp_reg = 0; // temp register for saving coils that hasnt been chosen
uint16_t coil_cnt = 0; // counter for processed coils
// cycle until all registers with requered coils would be processed
int shift = start_shift; // set shift to first coil in first register
for(int ind = 0; ind <= Divide_Up(start_shift + modbus_msg->Qnt, 16); ind++)
{
//----SET MASK FOR COILS REGISTER----
mask_for_coils = 0;
for(; shift < 0x10; shift++)
{
mask_for_coils |= 1<<(shift); // choose certain coil
if(++coil_cnt >= modbus_msg->Qnt)
break;
}
shift = 0; // set shift to zero for the next step
//-----------WRITE COILS-------------
// get current coils
temp_reg = *(coils+ind);
// set coils
setted_coils = ByteSwap16(modbus_msg->DATA[ind]) << start_shift;
if(ind > 0)
{
setted_coils |= ((ByteSwap16(modbus_msg->DATA[ind-1]) << start_shift) >> 16);
}
// write coils
*(coils+ind) = setted_coils & mask_for_coils;
// restore untouched coils
*(coils+ind) |= temp_reg&(~mask_for_coils);
if(coil_cnt >= modbus_msg->Qnt) // if all coils written - break cycle
break; // *kind of unnecessary
}
return 1;
}
/**
* @brief Proccess command Write Multiple Registers (16 - 0x10).
* @param modbus_msg - указатель на структуру собщения modbus.
* @return fMessageHandled - статус о результате обработки комманды.
* @details Обработка команды Write Multiple Registers.
*/
uint8_t MB_Write_Miltuple_Regs(RS_MsgTypeDef *modbus_msg)
{
//---------CHECK FOR ERRORS----------
if (modbus_msg->Qnt*2 != modbus_msg->ByteCnt)
{ // if quantity and bytes count arent match
modbus_msg->Except_Code = 3;
return 0;
}
// get origin address for data
uint16_t *pHoldRegs;
modbus_msg->Except_Code = MB_DefineRegistersAddress(&pHoldRegs, modbus_msg->Addr, modbus_msg->Qnt, RegisterType_Holding); // определение адреса регистров
if(modbus_msg->Except_Code != NO_ERRORS)
return 0;
//-----------WRITTING REGS-----------
for (int i = 0; i<modbus_msg->Qnt; i++)
{
*(pHoldRegs++) = modbus_msg->DATA[i];
}
return 1;
}
/**
* @brief Respond accord to received message.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @return RS_RES - статус о результате ответа на комманду.
* @details Обработка принятой комманды и ответ на неё.
*/
RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hmodbus, RS_MsgTypeDef *modbus_msg)
{
RS_StatusTypeDef MB_RES = 0;
hmodbus->f.MessageHandled = 0;
hmodbus->f.EchoResponse = 0;
RS_Reset_TX_Flags(hmodbus); // reset flag for correct transmit
if(modbus_msg->Func_Code < ERR_VALUES_START)// if no errors after parsing
{
switch (modbus_msg->Func_Code)
{
// Read Coils
case MB_R_COILS:
hmodbus->f.MessageHandled = MB_Read_Coils(hmodbus->pMessagePtr);
break;
// Read Hodling Registers
case MB_R_HOLD_REGS:
hmodbus->f.MessageHandled = MB_Read_Hold_Regs(hmodbus->pMessagePtr);
break;
case MB_R_IN_REGS:
hmodbus->f.MessageHandled = MB_Read_Input_Regs(hmodbus->pMessagePtr);
break;
// Write Single Coils
case MB_W_COIL:
hmodbus->f.MessageHandled = MB_Write_Single_Coil(hmodbus->pMessagePtr);
if(hmodbus->f.MessageHandled)
{
hmodbus->f.EchoResponse = 1;
hmodbus->RS_Message_Size -= 2; // echo response if write ok (minus 2 cause of two CRC bytes)
}
break;
case MB_W_HOLD_REG:
hmodbus->f.MessageHandled = MB_Write_Single_Reg(hmodbus->pMessagePtr);
if(hmodbus->f.MessageHandled)
{
hmodbus->f.EchoResponse = 1;
hmodbus->RS_Message_Size -= 2; // echo response if write ok (minus 2 cause of two CRC bytes)
}
break;
// Write Multiple Coils
case MB_W_COILS:
hmodbus->f.MessageHandled = MB_Write_Miltuple_Coils(hmodbus->pMessagePtr);
if(hmodbus->f.MessageHandled)
{
hmodbus->f.EchoResponse = 1;
hmodbus->RS_Message_Size = 6; // echo response if write ok (withous data bytes)
}
break;
// Write Multiple Registers
case MB_W_HOLD_REGS:
hmodbus->f.MessageHandled = MB_Write_Miltuple_Regs(hmodbus->pMessagePtr);
if(hmodbus->f.MessageHandled)
{
hmodbus->f.EchoResponse = 1;
hmodbus->RS_Message_Size = 6; // echo response if write ok (withous data bytes)
}
break;
/* unknown func code */
default: modbus_msg->Except_Code = 0x01; /* set exception code: illegal function */
}
if(hmodbus->f.MessageHandled == 0)
{
TrackerCnt_Err(hmodbus->rs_err);
modbus_msg->Func_Code += ERR_VALUES_START;
}
else
{
TrackerCnt_Ok(hmodbus->rs_err);
}
}
// if we need response - check that transmit isnt busy
if( RS_Is_TX_Busy(hmodbus) )
RS_Abort(hmodbus, ABORT_TX); // if tx busy - set it free
// Transmit right there, or sets (fDeferredResponse) to transmit response in main code
MB_RES = RS_Handle_Transmit_Start(hmodbus, modbus_msg);
hmodbus->RS_STATUS = MB_RES;
return MB_RES;
}
/**
* @brief Collect message in buffer to transmit it.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @param msg_uart_buff - указатель на буффер UART.
* @return RS_RES - статус о результате заполнения буфера.
* @details Заполнение буффера UART из структуры сообщения.
*/
RS_StatusTypeDef RS_Collect_Message(RS_HandleTypeDef *hmodbus, RS_MsgTypeDef *modbus_msg, uint8_t *modbus_uart_buff)
{
int ind = 0; // ind for modbus-uart buffer
if(hmodbus->f.EchoResponse && hmodbus->f.MessageHandled) // if echo response need
ind = hmodbus->RS_Message_Size;
else
{
//------INFO ABOUT DATA/MESSAGE------
//-----------[first bytes]-----------
// set ID of message/user
modbus_uart_buff[ind++] = modbus_msg->MbAddr;
// set dat or err response
modbus_uart_buff[ind++] = modbus_msg->Func_Code;
if (modbus_msg->Func_Code < ERR_VALUES_START) // if no error occur
{
// set size of received data
if (modbus_msg->ByteCnt <= DATA_SIZE*2) // if ByteCnt less than DATA_SIZE
modbus_uart_buff[ind++] = modbus_msg->ByteCnt;
else // otherwise return data_size err
{
TrackerCnt_Err(hmodbus->rs_err);
return RS_COLLECT_MSG_ERR;
}
//---------------DATA----------------
//-----------[data bytes]------------
uint16_t *tmp_data_addr = (uint16_t *)modbus_msg->DATA;
for(int i = 0; i < modbus_msg->ByteCnt; i++) // filling buffer with data
{ // set data
if (i%2 == 0) // HI byte
modbus_uart_buff[ind++] = (*tmp_data_addr)>>8;
else // LO byte
{
modbus_uart_buff[ind++] = *tmp_data_addr;
tmp_data_addr++;
}
}
}
else // if some error occur
{ // send expection code
modbus_uart_buff[ind++] = modbus_msg->Except_Code;
}
}
//---------------CRC----------------
//---------[last 16 bytes]----------
// calc crc of received data
uint16_t CRC_VALUE = crc16(modbus_uart_buff, ind);
// write crc to message structure and modbus-uart buffer
modbus_msg->MB_CRC = CRC_VALUE;
modbus_uart_buff[ind++] = CRC_VALUE;
modbus_uart_buff[ind++] = CRC_VALUE >> 8;
hmodbus->RS_Message_Size = ind;
return RS_OK; // returns ok
}
/**
* @brief Parse message from buffer to process it.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @param msg_uart_buff - указатель на буффер UART.
* @return RS_RES - статус о результате заполнения структуры.
* @details Заполнение структуры сообщения из буффера UART.
*/
RS_StatusTypeDef RS_Parse_Message(RS_HandleTypeDef *hmodbus, RS_MsgTypeDef *modbus_msg, uint8_t *modbus_uart_buff)
{
uint32_t check_empty_buff;
int ind = 0; // ind for modbus-uart buffer
//-----INFO ABOUT DATA/MESSAGE-------
//-----------[first bits]------------
// get ID of message/user
modbus_msg->MbAddr = modbus_uart_buff[ind++];
if(modbus_msg->MbAddr != hmodbus->ID)
return RS_SKIP;
// get dat or err response
modbus_msg->Func_Code = modbus_uart_buff[ind++];
// get address from CMD
modbus_msg->Addr = modbus_uart_buff[ind++] << 8;
modbus_msg->Addr |= modbus_uart_buff[ind++];
// get address from CMD
modbus_msg->Qnt = modbus_uart_buff[ind++] << 8;
modbus_msg->Qnt |= modbus_uart_buff[ind++];
if(hmodbus->f.RX_Half == 0) // if all message received
{
//---------------DATA----------------
// (optional)
if (modbus_msg->ByteCnt != 0)
{
ind++; // increment ind for data_size byte
//check that data size is correct
if (modbus_msg->ByteCnt > DATA_SIZE*2)
{
TrackerCnt_Err(hmodbus->rs_err);
modbus_msg->Func_Code += ERR_VALUES_START;
return RS_PARSE_MSG_ERR;
}
uint16_t *tmp_data_addr = (uint16_t *)modbus_msg->DATA;
for(int i = 0; i < modbus_msg->ByteCnt; i++) // /2 because we transmit 8 bits, not 16 bits
{ // set data
if (i%2 == 0)
*tmp_data_addr = ((uint16_t)modbus_uart_buff[ind++] << 8);
else
{
*tmp_data_addr |= modbus_uart_buff[ind++];
tmp_data_addr++;
}
}
}
//---------------CRC----------------
//----------[last 16 bits]----------
// calc crc of received data
uint16_t CRC_VALUE = crc16(modbus_uart_buff, ind);
// get crc of received data
modbus_msg->MB_CRC = modbus_uart_buff[ind++];
modbus_msg->MB_CRC |= modbus_uart_buff[ind++] << 8;
// compare crc
if (modbus_msg->MB_CRC != CRC_VALUE)
{
TrackerCnt_Err(hmodbus->rs_err);
modbus_msg->Func_Code += ERR_VALUES_START;
}
// hmodbus->MB_RESPONSE = MB_CRC_ERR; // set func code - error about wrong crc
// check is buffer empty
check_empty_buff = 0;
for(int i=0; i<ind;i++)
check_empty_buff += modbus_uart_buff[i];
// if(check_empty_buff == 0)
// hmodbus->MB_RESPONSE = MB_EMPTY_MSG; //
}
return RS_OK;
}
/**
* @brief Define size of RX Message that need to be received.
* @param hRS - указатель на хендлер RS.
* @param rx_data_size - указатель на переменную для записи кол-ва байт для принятия.
* @return RS_RES - статус о корректности рассчета кол-ва байт для принятия.
* @details Определение сколько байтов надо принять по протоколу.
*/
RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hmodbus, uint32_t *rx_data_size)
{
RS_StatusTypeDef MB_RES = 0;
MB_RES = RS_Parse_Message(hmodbus, hmodbus->pMessagePtr, hmodbus->pBufferPtr);
if(MB_RES == RS_SKIP) // if message not for us
return MB_RES; // return
if ((hmodbus->pMessagePtr->Func_Code & ~ERR_VALUES_START) < 0x0F)
{
hmodbus->pMessagePtr->ByteCnt = 0;
*rx_data_size = 1;
}
else
{
hmodbus->pMessagePtr->ByteCnt = hmodbus->pBufferPtr[RX_FIRST_PART_SIZE-1]; // get numb of data in command
// +1 because that defines is size, not ind.
*rx_data_size = hmodbus->pMessagePtr->ByteCnt + 2;
}
hmodbus->RS_Message_Size = RX_FIRST_PART_SIZE + *rx_data_size; // size of whole message
return RS_OK;
}
//-----------------------------FOR USER------------------------------
//-------------------------------------------------------------------
//-------------------------------------------------------------------
//-------------------------HANDLERS FUNCTION-------------------------
#if (MODBUS_UART_NUMB == 1) // choose handler for UART
void USART1_IRQHandler(void)
#elif (MODBUS_UART_NUMB == 2)
void USART2_IRQHandler(void)
#elif (MODBUS_UART_NUMB == 3)
void USART3_IRQHandler(void)
#elif (MODBUS_UART_NUMB == 4)
void USART4_IRQHandler(void)
#elif (MODBUS_UART_NUMB == 5)
void USART5_IRQHandler(void)
#elif (MODBUS_UART_NUMB == 6)
void USART6_IRQHandler(void)
#endif
{
Trace_MB_UART_Enter();
RS_UART_Handler(&hmodbus1);
Trace_MB_UART_Exit();
}
#if (MODBUS_TIM_NUMB == 1) || (MODBUS_TIM_NUMB == 10) // choose handler for TIM
void TIM1_UP_TIM10_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 2)
void TIM2_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 3)
void TIM3_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 4)
void TIM4_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 5)
void TIM5_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 6)
void TIM6_DAC_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 7)
void TIM7_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 8) || (MODBUS_TIM_NUMB == 13)
void TIM8_UP_TIM13_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 1) || (MODBUS_TIM_NUMB == 9)
void TIM1_BRK_TIM9_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 1) || (MODBUS_TIM_NUMB == 11)
void TIM1_TRG_COM_TIM11_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 8) || (MODBUS_TIM_NUMB == 12)
void TIM8_BRK_TIM12_IRQHandler(void)
#elif (MODBUS_TIM_NUMB == 8) || (MODBUS_TIM_NUMB == 14)
void TIM8_TRG_COM_TIM14_IRQHandler(void)
#endif
{
Trace_MB_TIM_Enter();
RS_TIM_Handler(&hmodbus1);
Trace_MB_TIM_Exit();
}
//-------------------------HANDLERS FUNCTION-------------------------
//-------------------------------------------------------------------

325
diode_tester/Core/Interfaces/modbus.h Normal file
View File

@ -0,0 +1,325 @@
/**
**************************************************************************
* @file modbus.h
* @brief Заголовочный файл модуля MODBUS.
* @details Данный файл необходимо подключить в rs_message.h. После подключать
* rs_message.h к основному проекту.
*
* @defgroup MODBUS
* @brief Modbus stuff
*
*************************************************************************/
#ifndef __MODBUS_H_
#define __MODBUS_H_
#include "mylibs_include.h"
#include "modbus_data.h"
//#include "settings.h" // for modbus settings
/**
* @addtogroup MODBUS_SETTINGS
* @ingroup MODBUS
* @brief Some defines for modbus
@{
*/
/////////////////////////////////////////////////////////////////////
//////////////////////////---SETTINGS---/////////////////////////////
// USER SETTINGS FOR MODBUS IN interface_config.h
//////////////////////////---SETTINGS---/////////////////////////////
/////////////////////////////////////////////////////////////////////
/////////////////////---USER MESSAGE DEFINES---//////////////////////
//-------------DEFINES FOR STRUCTURE----------------
/* defines for structure of modbus message */
#define MbAddr_SIZE 1 ///< size of (MbAddr)
#define Func_Code_SIZE 1 ///< size of (Func_Code)
#define Addr_SIZE 2 ///< size of (Addr)
#define Qnt_SIZE 2 ///< size of (Qnt)
#define ByteCnt_SIZE 1 ///< size of (ByteCnt)
#define DATA_SIZE 125 ///< maximum number of data: DWORD (NOT MESSAGE SIZE)
#define CRC_SIZE 2 ///< size of (MB_CRC) in bytes
/** @brief Size of whole message */
#define INFO_SIZE_MAX (MbAddr_SIZE+Func_Code_SIZE+Addr_SIZE+Qnt_SIZE+ByteCnt_SIZE)
/** @brief Size of first part of message that will be received
first receive info part of message, than defines size of rest message*/
#define RX_FIRST_PART_SIZE INFO_SIZE_MAX
/** @brief Size of buffer: max size of whole message */
#define MSG_SIZE_MAX (INFO_SIZE_MAX + DATA_SIZE*2 + CRC_SIZE) // max possible size of message
/** @brief Structure for modbus exception codes */
typedef enum //MB_ExceptionTypeDef
{
// reading
NO_ERRORS = 0x00, ///< no errors
ILLEGAL_FUNCTION = 0x01, ///< Принятый код функции не может быть обработан
ILLEGAL_DATA_ADDRESS = 0x02, ///< Адрес данных, указанный в запросе, недоступен
ILLEGAL_DATA_VALUE = 0x03, ///< Значение, содержащееся в поле данных запроса, является недопустимой величиной
SLAVE_DEVICE_FAILURE = 0x04, ///< Невосстанавливаемая ошибка имела место, пока ведомое устройство пыталось выполнить затребованное действие
// ACKNOWLEDGE = 0x05, ///< idk
// SLAVE_DEVICE_BUSY = 0x06, ///< idk
// MEMORY_PARITY_ERROR = 0x08, ///< idk
}MB_ExceptionTypeDef;
#define ERR_VALUES_START 0x80U ///< from this value starts error func codes
/** @brief Structure for modbus func codes */
typedef enum //MB_FunctonTypeDef
{
/* COMMANDS */
// reading
MB_R_COILS = 0x01, ///< Чтение битовых ячеек
MB_R_DISC_IN = 0x02, ///< Чтение дискретных входов
#ifndef TESTER_MODBUS_SWITCH_COMMAND_R_IN_REGS_AND_R_HOLD_REGS
MB_R_HOLD_REGS = 0x03, ///< Чтение входных регистров
MB_R_IN_REGS = 0x04, ///< Чтение регистров хранения
#else
MB_R_HOLD_REGS = 0x04, ///< Чтение входных регистров
MB_R_IN_REGS = 0x03, ///< Чтение регистров хранения
#endif
// writting
MB_W_COIL = 0x05, ///< Запись битовой ячейки
MB_W_HOLD_REG = 0x06, ///< Запись одиночного регистра
MB_W_COILS = 0x0F, ///< Запись нескольких битовых ячеек
MB_W_HOLD_REGS = 0x10, ///< Запись нескольких регистров
/* ERRORS */
// error reading
MB_ERR_R_COILS = MB_R_COILS + ERR_VALUES_START, ///< Ошибка чтения битовых ячеек
MB_ERR_R_DISC_IN = MB_R_DISC_IN + ERR_VALUES_START, ///< Ошибка чтения дискретных входов
MB_ERR_R_IN_REGS = MB_R_IN_REGS + ERR_VALUES_START, ///< Ошибка чтения регистров хранения
MB_ERR_R_HOLD_REGS = MB_R_HOLD_REGS + ERR_VALUES_START, ///< Ошибка чтения входных регистров
// error writting
MB_ERR_W_COIL = MB_W_COIL + ERR_VALUES_START, ///< Ошибка записи битовой ячейки
MB_ERR_W_HOLD_REG = MB_W_HOLD_REG + ERR_VALUES_START, ///< Ошибка записи одиночного регистра
MB_ERR_W_COILS = MB_W_COILS + ERR_VALUES_START, ///< Ошибка записи нескольких битовых ячеек
MB_ERR_W_HOLD_REGS = MB_W_HOLD_REGS + ERR_VALUES_START, ///< Ошибка записи нескольких регистров
}MB_FunctonTypeDef;
/** @brief Structure for modbus messsage */
typedef struct // RS_MsgTypeDef
{
uint8_t MbAddr; ///< Modbus Slave Address
MB_FunctonTypeDef Func_Code; ///< Modbus Function Code
uint16_t Addr; ///< Modbus Address of data
uint16_t Qnt; ///< Quantity of modbus data
uint8_t ByteCnt; ///< Quantity of bytes of data in message to transmit/receive
uint16_t DATA[DATA_SIZE]; ///< Modbus Data
MB_ExceptionTypeDef Except_Code; ///< Exception Code for the command
uint16_t MB_CRC; ///< Modbus CRC
}RS_MsgTypeDef;
//--------------------------------------------------
extern RS_MsgTypeDef MODBUS_MSG;
/////////////////////---MODBUS USER SETTINGS---//////////////////////
/** MODBUS_SETTINGS
* @}
*/
/////////////////////////////////////////////////////////////////////
////////////////////---MODBUS MESSAGE DEFINES---/////////////////////
/**
* @addtogroup MODBUS_MESSAGE_DEFINES
* @ingroup MODBUS
* @brief Some defines for modbus
@{
*/
/** @brief Structure for coils operation */
typedef enum
{
SET_COIL,
RESET_COIL,
TOOGLE_COIL,
}MB_CoilsOpTypeDef;
//--------------------------------------------------
/**
* @brief Macros to set pointer to 16-bit array
* @param _arr_ - массив регистров (16-бит).
*/
#define MB_Set_Arr16_Ptr(_arr_) ((uint16_t*)(&(_arr_)))
/**
* @brief Macros to set pointer to register
* @param _parr_ - массив регистров.
* @param _addr_ - Номер регистра (его индекс) от начала массива _arr_.
*/
#define MB_Set_Register_Ptr(_parr_, _addr_) ((uint16_t *)(_parr_)+(_addr_))
/**
* @brief Macros to set pointer to a certain register that contains certain coil
* @param _parr_ - массив коилов.
* @param _coil_ - Номер коила от начала массива _arr_.
* @note Используется вместе с @ref MB_Set_Coil_Mask
@verbatim Пояснение выражений
(_coil_/16) - get index (address shift) of register that contain certain coil
Visual explanation: 30th coil in coils registers array
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxCx
|register[0]----| |register[1]----|
|skip this------| |get this-------|
|shift to 14 bit|
@endverbatim
*/
#define MB_Set_Coil_Reg_Ptr(_parr_, _coil_) ((uint16_t *)(_parr_)+((_coil_)/16))
/**
* @brief Macros to set mask to a certain bit in coils register
* @param _coil_ - Номер коила от начала массива _arr_.
* @note Используется вместе с @ref MB_Set_Coil_Reg_Ptr
@verbatim Пояснение выражений
(16*(_coil_/16) - how many coils we need to skip. e.g. (16*30/16) - skip 16 coils from first register
_coil_-(16*(_coil_/16)) - shift to certain coil in certain register
e.g. Coil(30) gets in register[1] (30/16 = 1) coil №14 (30 - (16*30/16) = 30 - 16 = 14)
Visual explanation: 30th coil in coils registers array
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxCx
|register[0]----| |register[1]----|
|skip this------| |get this-------|
|shift to 14 bit|
@endverbatim
*/
#define MB_Set_Coil_Mask(_coil_) (1 << ( _coil_ - (16*((_coil_)/16)) ))
/**
* @brief Read Coil at its local address.
* @param _parr_ - массив коилов.
* @param _coil_ - Номер коила от начала массива _arr_.
* @return uint16_t - Возвращает запрошенный коил на 0м бите.
*
* @details Позволяет обратиться к коилу по адресу относительно _arr_.
*/
#define MB_Read_Coil_Local(_parr_, _coil_) (( *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) & MB_Set_Coil_Mask(_coil_) ) >> (_coil_))
/**
* @brief Set Coil at its local address.
* @param _parr_ - указатель на массив коилов.
* @param _coil_ - Номер коила от начала массива _arr_.
*
* @details Позволяет обратиться к коилу по адресу относительно _arr_.
*/
#define MB_Set_Coil_Local(_parr_, _coil_) *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) |= MB_Set_Coil_Mask(_coil_)
/**
* @brief Reset Coil at its local address.
* @param _parr_ - указатель на массив коилов.
* @param _coil_ - Номер коила от начала массива _arr_.
*
* @details Позволяет обратиться к коилу по адресу относительно _arr_.
*/
#define MB_Reset_Coil_Local(_parr_, _coil_) *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) &= ~(MB_Set_Coil_Mask(_coil_))
/**
* @brief Set Coil at its local address.
* @param _parr_ - указатель на массив коилов.
* @param _coil_ - Номер коила от начала массива _arr_.
*
* @details Позволяет обратиться к коилу по адресу относительно _arr_.
*/
#define MB_Toogle_Coil_Local(_parr_, _coil_) *MB_Set_Coil_Reg_Ptr(_parr_, _coil_) ^= MB_Set_Coil_Mask(_coil_)
//--------------------------------------------------
//------------------OTHER DEFINES-------------------
#define RegisterType_Holding 0
#define RegisterType_Input 1
#define RegisterType_Discrete 2
// create hadnles and settings for uart, tim, rs with _modbus_ name
#define CONCAT(a,b) a##b
#define Create_MODBUS_Handles(_modbus_) \
UART_SettingsTypeDef CONCAT(_modbus_, _suart); \
UART_HandleTypeDef CONCAT(_modbus_, _huart); \
TIM_SettingsTypeDef CONCAT(_modbus_, _stim); \
TIM_HandleTypeDef CONCAT(_modbus_, _htim); \
RS_HandleTypeDef CONCAT(h, _modbus_)
//--------------------------------------------------
/** GENERAL_MODBUS_STUFF
* @}
*/
////////////////////---MODBUS MESSAGE DEFINES---/////////////////////
/////////////////////////////////////////////////////////////////////
/////////////////////////---FUNCTIONS---/////////////////////////////
/**
* @addtogroup MODBUS_FUNCTIONS
* @ingroup MODBUS
* @brief Function for controling modbus communication
*/
//----------------FUNCTIONS FOR USER----------------
/**
* @addtogroup MODBUS_DATA_ACCESS_FUNCTIONS
* @ingroup MODBUS_FUNCTIONS
* @brief Function for user use
@{
*/
/* First set up of MODBUS */
void MODBUS_FirstInit(void);
/* Set or Reset Coil at its global address */
MB_ExceptionTypeDef MB_Write_Coil_Global(uint16_t Addr, MB_CoilsOpTypeDef WriteVal);
/* Read Coil at its global address */
uint16_t MB_Read_Coil_Global(uint16_t Addr, MB_ExceptionTypeDef *Exception);
/** MODBUS_DATA_ACCESS_FUNCTIONS
* @}
*/
//---------PROCESS MODBUS COMMAND FUNCTIONS---------
/**
* @addtogroup MODBUS_CMD_PROCESS_FUNCTIONS
* @ingroup MODBUS_FUNCTIONS
* @brief Function process commands
@{
*/
/* Check is address valid for certain array */
MB_ExceptionTypeDef MB_Check_Address_For_Arr(uint16_t Addr, uint16_t Qnt, uint16_t R_ARR_ADDR, uint16_t R_ARR_NUMB);
/* Define Address Origin for Input/Holding Registers */
MB_ExceptionTypeDef MB_DefineRegistersAddress(uint16_t **pRegs, uint16_t Addr, uint16_t Qnt, uint8_t RegisterType);
/* Define Address Origin for coils */
MB_ExceptionTypeDef MB_DefineCoilsAddress(uint16_t **pCoils, uint16_t Addr, uint16_t Qnt, uint16_t *start_shift, uint8_t WriteFlag);
/* Proccess command Read Coils (01 - 0x01) */
uint8_t MB_Read_Coils(RS_MsgTypeDef *modbus_msg);
/* Proccess command Read Holding Registers (03 - 0x03) */
uint8_t MB_Read_Hold_Regs(RS_MsgTypeDef *modbus_msg);
/* Proccess command Read Input Registers (04 - 0x04) */
uint8_t MB_Read_Input_Regs(RS_MsgTypeDef *modbus_msg);
/* Proccess command Write Single Coils (05 - 0x05) */
uint8_t MB_Write_Single_Coil(RS_MsgTypeDef *modbus_msg);
/* Proccess command Write Multiple Coils (15 - 0x0F) */
uint8_t MB_Write_Miltuple_Coils(RS_MsgTypeDef *modbus_msg);
/* Proccess command Write Multiple Register (16 - 0x10) */
uint8_t MB_Write_Miltuple_Regs(RS_MsgTypeDef *modbus_msg);
/** MODBUS_DATA_ACCESS_FUNCTIONS
* @}
*/
/////////////////////////---FUNCTIONS---/////////////////////////////
/////////////////////////////////////////////////////////////////////
/////////////////////////---CALC DEFINES---//////////////////////////
// TRACES DEFINES
#ifndef Trace_MB_UART_Enter
#define Trace_MB_UART_Enter()
#endif //Trace_MB_UART_Enter
#ifndef Trace_MB_UART_Exit
#define Trace_MB_UART_Exit()
#endif //Trace_MB_UART_Exit
#ifndef Trace_MB_TIM_Enter
#define Trace_MB_TIM_Enter()
#endif //Trace_MB_TIM_Enter
#ifndef Trace_MB_TIM_Exit
#define Trace_MB_TIM_Exit()
#endif //Trace_MB_TIM_Exit
#endif //__MODBUS_H_

163
diode_tester/Core/Interfaces/modbus_data.h Normal file
View File

@ -0,0 +1,163 @@
/**
**************************************************************************
* @file modbus_data.h
* @brief Заголовочный файл с описанием даты MODBUS.
* @details Данный файл необходимо подключается в rs_message.h. После rs_message.h
* подключается к основному проекту.
*
* @defgroup MODBUS_DATA
* @ingroup MODBUS
* @brief Modbus data description
*
*************************************************************************/
#ifndef _MODBUS_DATA_H_
#define _MODBUS_DATA_H_
#include "stdint.h"
//--------------DEFINES FOR REGISTERS---------------
// DEFINES FOR ARRAYS
/**
* @addtogroup MODBUS_DATA_RERISTERS_DEFINES
* @ingroup MODBUS_DATA
* @brief Defines for registers
Структура дефайна адресов
@verbatim
Для массивов регистров:
R_<NAME_ARRAY>_ADDR - модбас адресс первого регистра в массиве
R_<NAME_ARRAY>_QNT - количество регистров в массиве
@endverbatim
* @{
*/
/**
* @brief Регистры хранения
*/
typedef struct //MB_DataInRegsTypeDef
{
unsigned DUMMY;
}MB_DataInRegsTypeDef;
/**
* @brief Входные регистры
*/
typedef struct //MB_DataInRegsTypeDef
{
unsigned DUMMY;
}MB_DataHoldRegsTypeDef;
// DEFINES FOR INPUT REGISTERS ARRAYS
#define R_TE_VOLTAGE_ADDR 0
#define R_TE_VOLTAGE_QNT 85
#define R_STATUS_REG_ADDR 85
#define R_STATUS_REG_QNT 1
// DEFINES FOR HOLDING REGISTERS ARRAYS
#define R_SETPOINTS_ADDR 0
#define R_SETPOINTS_QNT 170
#define R_SETTINGS_ADDR 170
#define R_SETTINGS_QNT 5
// DEFINES FOR REGISTERS LOCAL ADDRESSES
//#define R_SET_ERROR(_te_num_) 0
/** MODBUS_DATA_RERISTERS_DEFINES
* @}
*/
//----------------DEFINES FOR COILS-----------------
/**
* @addtogroup MODBUS_DATA_COILS_DEFINES
* @ingroup MODBUS_DATA
* @brief Defines for coils
@verbatim
Структура дефайна
Для массивов коилов:
C_<NAME_ARRAY>_ADDR - модбас адресс первого коила в массиве
C_<NAME_ARRAY>_QNT - количество коилов в массиве (минимум 16)
@endverbatim
* @{
*/
/**
* @brief Коилы
*/
typedef struct //MB_DataCoilsTypeDef
{
unsigned DUMMY;
}MB_DataCoilsTypeDef;
// DEFINES FOR COIL ARRAYS
#define C_TE_EXCLUDE_ADDR 0
#define C_TE_EXCLUDE_QNT 85
/** MODBUS_DATA_COILS_DEFINES
* @}
*/
//-----------MODBUS DEVICE DATA SETTING-------------
// MODBUS DATA STRUCTTURE
/**
* @brief Структура со всеми регистрами и коилами модбас
* @ingroup MODBUS_DATA
*/
typedef struct // tester modbus data
{
MB_DataInRegsTypeDef InRegs; ///< Modbus input registers @ref MB_DataInRegsTypeDef
MB_DataCoilsTypeDef Coils; ///< Modbus coils @ref MB_DataCoilsTypeDef
MB_DataHoldRegsTypeDef HoldRegs; ///< Modbus holding registers @ref MB_DataHoldRegsTypeDef
}MB_DataStructureTypeDef;
extern MB_DataStructureTypeDef MB_DATA;
#endif //_MODBUS_DATA_H_
/////////////////////////////////////////////////////////////
///////////////////////TEMP/OUTDATE/OTHER////////////////////
//typedef enum //MB_TESTERCommandsTypeDef
//{
// StandartMode = 0x00, ///< Стандартная работа
// Opros_TE_Disable = 0x01, ///< Запрет опроса ТЭ (активен только обмен с ЛСУ ЭС, ТЭ не контролируются)
//}MB_TESTERCommandsTypeDef;
///**
// * @brief Состояние МЗКТЭ
// */
//typedef enum //MB_TESTERErrStatusTypeDef
//{
// TESTER_OK = 0x0, ///< МЗКТЭ функционирует нормально. Идет опрос ТЭ.
// NonCritical_Err = 0x1, ///< Неисправность МЗКТЭ, при которой МЗКТЭ может выполнять свои основные функции (некоторые программные ошибки из @ref MB_TESTERTrackerTypeDef).
// Critical_Err = 0x2, ///< Неисправность МЗКТЭ, при которой выполнение основных функций не представляется возможным (ошибки 1-3 и некоторые программные ошибки из @ref MB_TESTERTrackerTypeDef)
//
//}MB_TESTERErrStatusTypeDef;
//typedef enum
//{
// TE_No_Err = 0x0, ///< Напряжения на всех ТЭ выше аварийных порогов, задаваемых уставками «Авария»
// TE_Err = 0x1, ///< Напряжение на одном или нескольких ТЭ достигло или ниже аварийного порога, задаваемого уставкой «Авария»
//}MB_TEErrActiveTypeDef;
//typedef enum
//{
// TE_No_Warn = 0x0, ///< Напряжения на всех ТЭ выше предупредительных порогов, задаваемых уставкой «Предупреждение»
// TE_Warn = 0x1, ///< Напряжение на одном или нескольких ТЭ достигло или ниже предупредительного порога, задаваемого уставкой «Предупреждение»
//}MB_TEWarnActiveTypeDef;
//typedef enum
//{
// OprosTE_Enable = 0x0, ///< Опрос ТЭ разрешен
// OprosTE_Disable = 0x1, ///< Опрос ТЭ запрещен (см. регистр хранения 170)
//}MB_OprosTETypeDef;

580
diode_tester/Core/Interfaces/rs_message.c Normal file
View File

@ -0,0 +1,580 @@
/**
**************************************************************************
* @file rs_message.c
* @brief Модуль для реализации протоколов по RS/UART.
**************************************************************************
@verbatim
//-------------------Функции-------------------//
Functions: users
- RS_Parse_Message/RS_Collect_Message Заполнение структуры сообщения и буфера
- RS_Response Ответ на сообщение
- RS_Define_Size_of_RX_Message Определение размера принимаемых данных
Functions: general
- RS_Receive_IT Ожидание комманды и ответ на неё
- RS_Transmit_IT Отправление комманды и ожидание ответа
- RS_Init Инициализация переферии и структуры для RS
- RS_ReInit_UART Реинициализация UART для RS
- RS_Abort Отмена приема/передачи по ЮАРТ
- RS_Init Инициализация периферии и modbus handler
Functions: callback/handler
- RS_Handle_Receive_Start Функция для запуска приема или остановки RS
- RS_Handle_Transmit_Start Функция для запуска передачи или остановки RS
- RS_UART_RxCpltCallback Коллбек при окончании приема или передачи
RS_UART_TxCpltCallback
- RS_UART_Handler Обработчик прерывания для UART
- RS_TIM_Handler Обработчик прерывания для TIM
Functions: uart initialize (это было в отдельных файлах, мб надо обратно разнести)
- UART_Base_Init Инициализация UART для RS
- RS_UART_GPIO_Init Инициализация GPIO для RS
- UART_DMA_Init Инициализация DMA для RS
- UART_MspInit Аналог HAL_MspInit для RS
- UART_MspDeInit Аналог HAL_MspDeInit для RS
@endverbatim
*************************************************************************/
#include "rs_message.h"
uint8_t RS_Buffer[MSG_SIZE_MAX]; // uart buffer
#ifndef INCLUDE_GENERAL_PERIPH_LIBS
extern void RS_UART_Init(void);
extern void RS_UART_DeInit(UART_HandleTypeDef *huart);
extern void RS_TIM_Init(void);
extern void RS_TIM_DeInit(TIM_HandleTypeDef *htim);
#endif
//-------------------------------------------------------------------
//-------------------------GENERAL FUNCTIONS-------------------------
/**
* @brief Start receive IT.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @return RS_RES - статус о состоянии RS после инициализации приема.
*/
RS_StatusTypeDef RS_Receive_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
{
RS_StatusTypeDef RS_RES = 0;
HAL_StatusTypeDef uart_res = 0;
//-------------CHECK RS LINE----------------
// check that receive isnt busy
if( RS_Is_RX_Busy(hRS) ) // if tx busy - return busy status
return RS_BUSY;
//-----------INITIALIZE RECEIVE-------------
// if all OK: start receiving
RS_EnableReceive();
RS_Set_Busy(hRS); // set RS busy
RS_Set_RX_Flags(hRS); // initialize flags for receive
hRS->pMessagePtr = RS_msg; // set pointer to message structire for filling it from UARTHandler fucntions
// start receiving
uart_res = HAL_UART_Receive_IT(hRS->huart, hRS->pBufferPtr, RX_FIRST_PART_SIZE); // receive until ByteCnt+1 byte,
// then in Callback restart receive for rest bytes
// if receive isnt started - abort RS
if(uart_res != HAL_OK)
{
RS_RES = RS_Abort(hRS, ABORT_RS);
printf_rs_err("\n%d: Error RS: Failed to start RS receiving...", uwTick);
TrackerCnt_Err(hRS->rs_err);
}
else
{
RS_RES = RS_OK;
printf_rs("\n%d: RS: Start Receiving...", uwTick);
TrackerCnt_Ok(hRS->rs_err);
}
hRS->RS_STATUS = RS_RES;
return RS_RES; // returns result of receive init
}
/**
* @brief Start transmit IT.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @return RS_RES - статус о состоянии RS после инициализации передачи.
*/
RS_StatusTypeDef RS_Transmit_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
{
RS_StatusTypeDef RS_RES = 0;
HAL_StatusTypeDef uart_res = 0;
//-------------CHECK RS LINE----------------
// check that transmit isnt busy
if( RS_Is_TX_Busy(hRS) ) // if tx busy - return busy status
return RS_BUSY;
// check receive line
//------------COLLECT MESSAGE---------------
RS_RES = RS_Collect_Message(hRS, RS_msg, hRS->pBufferPtr);
if (RS_RES != RS_OK) // if message isnt collect - stop RS and return error in RS_RES
{// need collect message status, so doesnt write abort to RS_RES
RS_Abort(hRS, ABORT_RS);
RS_Handle_Receive_Start(hRS, hRS->pMessagePtr); // restart receive
}
else // if collect successful
{
//----------INITIALIZE TRANSMIT-------------
RS_EnableTransmit();
// for(int i = 0; i < hRS->sRS_Timeout; i++);
RS_Set_Busy(hRS); // set RS busy
RS_Set_TX_Flags(hRS); // initialize flags for transmit IT
hRS->pMessagePtr = RS_msg; // set pointer for filling given structure from UARTHandler fucntion
// if all OK: start transmitting
uart_res = HAL_UART_Transmit_IT(hRS->huart, hRS->pBufferPtr, hRS->RS_Message_Size);
// if transmit isnt started - abort RS
if(uart_res != HAL_OK)
{
RS_RES = RS_Abort(hRS, ABORT_RS);
printf_rs_err("\n%d: Error RS: Failed to start RS transmitting...", uwTick);
TrackerCnt_Err(hRS->rs_err);
}
else
{
RS_RES = RS_OK;
printf_rs("\n%d: RS: Start Transmitting...", uwTick);
TrackerCnt_Ok(hRS->rs_err);
}
}
hRS->RS_STATUS = RS_RES;
return RS_RES; // returns result of transmit init
}
/**
* @brief Initialize UART and handle RS stucture.
* @param hRS - указатель на хендлер RS.
* @param suart - указатель на структуру с настройками UART.
* @param stim - указатель на структуру с настройками таймера.
* @param pRS_BufferPtr - указатель на буффер для приема-передачи по UART. Если он NULL, то поставиться библиотечный буфер.
* @return RS_RES - статус о состоянии RS после инициализации.
* @note Инициализация перефирии и структуры для приема-передачи по RS.
*/
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart, TIM_SettingsTypeDef *stim, uint8_t *pRS_BufferPtr)
#else
RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_HandleTypeDef *huart, TIM_HandleTypeDef *htim, uint8_t *pRS_BufferPtr)
#endif
{
// check that hRS is defined
if (hRS == NULL)
return RS_ERR;
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
// check that huart is defined
if ((suart->huart.Instance == NULL) || (suart->huart.Init.BaudRate == NULL))
return RS_ERR;
#else
// check that huart is defined
if (huart == NULL)
return RS_ERR;
#endif
// init uart
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
UART_Base_Init(suart);
hRS->huart = &suart->huart;
#else
RS_UART_Init();
hRS->huart = huart;
#endif
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
// check that timeout in interrupt needed
if (hRS->sRS_Timeout)
{
if (stim->htim.Instance == NULL) // check is timer defined
return RS_ERR;
// calc frequency corresponding to timeout and tims 1ms tickbase
stim->sTickBaseUS = TIM_TickBase_1MS;
stim->htim.Init.Period = hRS->sRS_Timeout;
TIM_Base_Init(stim);
hRS->htim = &stim->htim;
}
#else
RS_TIM_Init();
hRS->htim = htim;
#endif
if (hRS->sRS_RX_Size_Mode == NULL)
return RS_ERR;
// check that buffer is defined
if (hRS->pBufferPtr == NULL)
{
hRS->pBufferPtr = RS_Buffer; // if no - set default
}
else
hRS->pBufferPtr = pRS_BufferPtr; // if yes - set by user
return RS_OK;
}
/**
* @brief ReInitialize UART and RS receive.
* @param hRS - указатель на хендлер RS.
* @param suart - указатель на структуру с настройками UART.
* @return RS_RES - статус о состоянии RS после инициализации.
* @note Реинициализация UART и приема по RS.
*/
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart)
#else
HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_HandleTypeDef *huart)
#endif
{
HAL_StatusTypeDef RS_RES;
hRS->f.ReInit_UART = 0;
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
// check is settings are valid
if(Check_UART_Init_Struct(suart) != HAL_OK)
return HAL_ERROR;
RS_Abort(hRS, ABORT_RS);
UART_MspDeInit(&suart->huart);
RS_RES = UART_Base_Init(suart);
RS_RES = RS_UART_Init()
#else
// // check is settings are valid
// if(Check_UART_Init_Struct(suart) != HAL_OK)
// return HAL_ERROR;
RS_Abort(hRS, ABORT_RS);
RS_UART_DeInit(huart);
RS_UART_Init();
#endif
RS_Receive_IT(hRS, hRS->pMessagePtr);
return RS_RES;
}
/**
* @brief Abort RS/UART.
* @param hRS - указатель на хендлер RS.
* @param AbortMode - выбор, что надо отменить.
- ABORT_TX: Отмена передачи по ЮАРТ, с очищением флагов TX,
- ABORT_RX: Отмена приема по ЮАРТ, с очищением флагов RX,
- ABORT_RX_TX: Отмена приема и передачи по ЮАРТ,
- ABORT_RS: Отмена приема-передачи RS, с очищением всей структуры.
* @return RS_RES - статус о состоянии RS после аборта.
* @note Отмена работы UART в целом или отмена приема/передачи RS.
Также очищается хендл hRS.
*/
RS_StatusTypeDef RS_Abort(RS_HandleTypeDef *hRS, RS_AbortTypeDef AbortMode)
{
HAL_StatusTypeDef uart_res = 0;
hRS->htim->Instance->CNT = 0;
__HAL_TIM_CLEAR_IT(hRS->htim, TIM_IT_UPDATE);
if(hRS->sRS_Timeout) // if timeout setted
HAL_TIM_Base_Stop_IT(hRS->htim); // stop timeout
if((AbortMode&ABORT_RS) == 0x00)
{
if((AbortMode&ABORT_RX) == ABORT_RX)
{
uart_res = HAL_UART_AbortReceive(hRS->huart); // abort receive
RS_Reset_RX_Flags(hRS);
}
if((AbortMode&ABORT_TX) == ABORT_TX)
{
uart_res = HAL_UART_AbortTransmit(hRS->huart); // abort transmit
RS_Reset_TX_Flags(hRS);
}
}
else
{
uart_res = HAL_UART_Abort(hRS->huart);
RS_Clear_All(hRS);
}
hRS->RS_STATUS = RS_ABORTED;
return RS_ABORTED;
}
//-------------------------GENERAL FUNCTIONS-------------------------
//-------------------------------------------------------------------
//-------------------------------------------------------------------
//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
/**
* @brief Handle for starting receive.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @return RS_RES - статус о состоянии RS после инициализации приема или окончания общения.
* @note Определяет начинать прием команды/ответа или нет.
*/
RS_StatusTypeDef RS_Handle_Receive_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
{
RS_StatusTypeDef RS_RES = 0;
switch(hRS->sRS_Mode)
{
case SLAVE_ALWAYS_WAIT: // in slave mode with permanent waiting
RS_RES = RS_Receive_IT(hRS, RS_msg); break; // start receiving again
case SLAVE_TIMEOUT_WAIT: // in slave mode with timeout waiting (start receiving cmd by request)
RS_Set_Free(hRS); RS_RES = RS_OK; break; // end RS communication (set RS unbusy)
}
if(RS_RES != RS_OK)
{
TrackerCnt_Err(hRS->rs_err);
}
return RS_RES;
}
/**
* @brief Handle for starting transmit.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @return RS_RES - статус о состоянии RS после инициализации передачи.
* @note Определяет отвечать ли на команду или нет.
*/
RS_StatusTypeDef RS_Handle_Transmit_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
{
RS_StatusTypeDef RS_RES = 0;
switch(hRS->sRS_Mode)
{
case SLAVE_ALWAYS_WAIT: // in slave mode always response
case SLAVE_TIMEOUT_WAIT: // transmit response
RS_RES = RS_Transmit_IT(hRS, RS_msg); break;
}
if(RS_RES != RS_OK)
{
TrackerCnt_Err(hRS->rs_err);
}
return RS_RES;
}
/**
* @brief UART RX Callback: define behaviour after receiving parts of message.
* @param hRS - указатель на хендлер RS.
* @return RS_RES - статус о состоянии RS после обработки приема.
* @note Контролирует прием сообщения: определяет размер принимаемой посылки и обрабатывает его.
*/
RS_StatusTypeDef RS_UART_RxCpltCallback(RS_HandleTypeDef *hRS)
{
RS_StatusTypeDef RS_RES = 0;
HAL_StatusTypeDef uart_res = 0;
// if we had received bytes before ByteCnt
if((hRS->sRS_RX_Size_Mode == RS_RX_Size_NotConst) && (hRS->f.RX_Half == 0)) // if data size isnt constant and its first half, and
{ // First receive part of message, then define size of rest of message, and start receive it
hRS->f.RX_Half = 1;
//---------------FIND DATA SIZE-----------------
uint32_t NuRS_of_Rest_Bytes = 0;
RS_RES = RS_Define_Size_of_RX_Message(hRS, &NuRS_of_Rest_Bytes);
// if there is no bytes to receive OR we need to skip this message - restart receive
if ((NuRS_of_Rest_Bytes == 0) || (RS_RES == RS_SKIP))
{
TrackerCnt_Err(hRS->rs_err);
RS_Abort(hRS, ABORT_RX);
RS_RES = RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
return RS_RES;
}
//-------------START UART RECEIVE---------------
uart_res = HAL_UART_Receive_IT(hRS->huart, (hRS->pBufferPtr + RX_FIRST_PART_SIZE), NuRS_of_Rest_Bytes);
if(uart_res != HAL_OK)
{// need uart status, so doesnt write abort to RS_RES
TrackerCnt_Err(hRS->rs_err);
RS_RES = RS_Abort(hRS, ABORT_RS);
}
else
RS_RES = RS_OK;
}
else // if we had received whole message
{
hRS->f.RX_Half = 0;
//---------PROCESS DATA & ENDING RECEIVING--------
RS_Set_RX_End(hRS);
if(hRS->sRS_Timeout) // if timeout setted
HAL_TIM_Base_Stop_IT(hRS->htim); // stop timeout
// parse received data
RS_RES = RS_Parse_Message(hRS, hRS->pMessagePtr, hRS->pBufferPtr); // parse message
// RESPONSE
RS_RES = RS_Response(hRS, hRS->pMessagePtr);
}
return RS_RES;
}
/**
* @brief UART TX Callback: define behaviour after transmiting message.
* @param hRS - указатель на хендлер RS.
* @return RS_RES - статус о состоянии RS после обработки приема.
* @note Определяет поведение RS после передачи сообщения.
*/
RS_StatusTypeDef RS_UART_TxCpltCallback(RS_HandleTypeDef *hRS)
{
RS_StatusTypeDef RS_RES = RS_OK;
HAL_StatusTypeDef uart_res = 0;
//--------------ENDING TRANSMITTING-------------
RS_Set_TX_End(hRS);
RS_EnableReceive();
// for(int i = 0; i < hRS->sRS_Timeout; i++);
//-----------START RECEIVING or END RS----------
RS_RES = RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
return RS_RES;
}
/**
* @brief Handler for UART.
* @param hRS - указатель на хендлер RS.
* @note Обрабатывает ошибки если есть и вызывает RS Коллбеки.
* Добавить вызов этой функции в UARTx_IRQHandler().
*/
void RS_UART_Handler(RS_HandleTypeDef *hRS)
{
HAL_UART_IRQHandler(hRS->huart);
//-------------CALL RS CALLBACKS------------
/* IF NO ERROR OCCURS */
if(hRS->huart->ErrorCode == 0)
{
hRS->htim->Instance->CNT = 0; // reset cnt;
/* Start timeout */
if(hRS->sRS_Timeout) // if timeout setted
if((hRS->huart->RxXferCount+1 == hRS->huart->RxXferSize) && RS_Is_RX_Busy(hRS)) // if first byte is received and receive is active
{
HAL_TIM_Base_Start_IT(hRS->htim);
RS_Set_RX_Active_Flags(hRS);
}
/* RX Callback */
if (( hRS->huart->RxXferCount == 0U) && RS_Is_RX_Busy(hRS) && // if all bytes are received and receive is active
hRS->huart->RxState != HAL_UART_STATE_BUSY_RX) // also check that receive "REALLY" isnt busy
RS_UART_RxCpltCallback(hRS);
/* TX Callback */
if (( hRS->huart->TxXferCount == 0U) && RS_Is_TX_Busy(hRS) && // if all bytes are transmited and transmit is active
hRS->huart->gState != HAL_UART_STATE_BUSY_TX) // also check that receive "REALLY" isnt busy
RS_UART_TxCpltCallback(hRS);
}
//----------------ERRORS HANDLER----------------
else
{
TrackerCnt_Err(hRS->rs_err);
/* de-init uart transfer */
RS_Abort(hRS, ABORT_RS);
RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
// later, maybe, will be added specific handlers for err
}
}
/**
* @brief Handler for TIM.
* @param hRS - указатель на хендлер RS.
* @note Попадание сюда = таймаут и перезапуск RS приема
* Добавить вызов этой функции в TIMx_IRQHandler().
*/
void RS_TIM_Handler(RS_HandleTypeDef *hRS)
{
HAL_TIM_IRQHandler(hRS->htim);
HAL_TIM_Base_Stop_IT(hRS->htim);
RS_Abort(hRS, ABORT_RS);
RS_Handle_Receive_Start(hRS, hRS->pMessagePtr);
}
//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
//-------------------------------------------------------------------
//-------------------------------------------------------------------
//--------------WEAK PROTOTYPES FOR PROCESSING MESSAGE---------------
/**
* @brief Respond accord to received message.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @return RS_RES - статус о результате ответа на комманду.
* @note Обработка принятой комманды и ответ на неё.
*/
__weak RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg)
{
/* Redefine function for user purposes */
return RS_ERR;
}
/**
* @brief Collect message in buffer to transmit it.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @param msg_uart_buff - указатель на буффер UART.
* @return RS_RES - статус о результате заполнения буфера.
* @note Заполнение буффера UART из структуры сообщения.
*/
__weak RS_StatusTypeDef RS_Collect_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff)
{
/* Redefine function for user purposes */
return RS_ERR;
}
/**
* @brief Parse message from buffer to process it.
* @param hRS - указатель на хендлер RS.
* @param RS_msg - указатель на структуру сообщения.
* @param msg_uart_buff - указатель на буффер UART.
* @return RS_RES - статус о результате заполнения структуры.
* @note Заполнение структуры сообщения из буффера UART.
*/
__weak RS_StatusTypeDef RS_Parse_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff)
{
/* Redefine function for user purposes */
return RS_ERR;
}
/**
* @brief Define size of RX Message that need to be received.
* @param hRS - указатель на хендлер RS.
* @param rx_data_size - указатель на переменную для записи кол-ва байт для принятия.
* @return RS_RES - статус о корректности рассчета кол-ва байт для принятия.
* @note Определение сколько байтов надо принять по протоколу.
*/
__weak RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hRS, uint32_t *rx_data_size)
{
/* Redefine function for user purposes */
return RS_ERR;
}
//--------------WEAK PROTOTYPES FOR PROCESSING MESSAGE---------------
//-------------------------------------------------------------------

265
diode_tester/Core/Interfaces/rs_message.h Normal file
View File

@ -0,0 +1,265 @@
/**
**************************************************************************
* @file rs_message.h
* @brief Заголовочный файл для модуля реализации протоколов по RS/UART.
**************************************************************************
* @defgroup RS_TOOLS
* @brief Всякое для работы по UART/RS
**************************************************************************
@details
**************************************************************************
Для настройки RS/UART под нужный протокол, необходимо:
- Определить структуру сообщения RS_MsgTypeDef и
дефайны RX_FIRST_PART_SIZE и MSG_SIZE_MAX.
- Подключить этот файл в раздел rs_message.h.
- Определить функции для обработки сообщения: RS_Parse_Message(),
RS_Collect_Message(), RS_Response(), RS_Define_Size_of_RX_Message()
- Добавить UART/TIM Handler в Хендлер используемых UART/TIM.
Так же данный модуль использует счетчики
**************************************************************************
@verbatim
Визуальное описание. Форматирование сохраняется как в коде.
@endverbatim
*************************************************************************/
#ifndef __RS_LIB_H_
#define __RS_LIB_H_
#include "modbus.h"
#include "mylibs_include.h"
#include "crc_algs.h"
/////////////////////////////////////////////////////////////////////
////////////////////////////---DEFINES---////////////////////////////
/* Check that all defines required by RS are defined */
#ifndef MSG_SIZE_MAX
#error Define MSG_SIZE_MAX (Maximum size of message). This is necessary to create buffer for UART.
#endif
#ifndef RX_FIRST_PART_SIZE
#error Define RX_FIRST_PART_SIZE (Size of first part of message). This is necessary to receive the first part of the message, from which determine the size of the remaining part of the message.
#endif
/* Clear message-uart buffer */
#define RS_Clear_Buff(_buff_) for(int i=0; i<MSG_SIZE_MAX;i++) _buff_[i] = NULL
/* Set/Reset flags */
#define RS_Set_Free(_hRS_) _hRS_->f.RS_Busy = 0
#define RS_Set_Busy(_hRS_) _hRS_->f.RS_Busy = 1
#define RS_Set_RX_Flags(_hRS_) _hRS_->f.RX_Busy = 1; _hRS_->f.RX_Done = 0; _hRS_->f.RX_Half = 0
#define RS_Set_RX_Active_Flags(_hRS_) _hRS_->f.RX_Ongoing = 1
#define RS_Set_TX_Flags(_hRS_) _hRS_->f.TX_Busy = 1; _hRS_->f.TX_Done = 0
#define RS_Reset_RX_Active_Flags(_hRS_) _hRS_->f.RX_Ongoing = 0
#define RS_Reset_RX_Flags(_hRS_) RS_Reset_RX_Active_Flags(_hRS_); _hRS_->f.RX_Busy = 0; _hRS_->f.RX_Done = 0; _hRS_->f.RX_Half = 0
#define RS_Reset_TX_Flags(_hRS_) _hRS_->f.TX_Busy = 0; _hRS_->f.TX_Done = 0
#define RS_Set_RX_End_Flag(_hRS_) _hRS_->f.RX_Done = 1;
#define RS_Set_TX_End_Flag(_hRS_) _hRS_->f.TX_Done = 1
#define RS_Set_RX_End(_hRS_) RS_Reset_RX_Flags(_hRS_); RS_Set_RX_End_Flag(_hRS_)
#define RS_Set_TX_End(_hRS_) RS_Reset_TX_Flags(_hRS_); RS_Set_TX_End_Flag(_hRS_)
/* Clear all RS stuff */
#define RS_Clear_All(_hRS_) RS_Clear_Buff(_hRS_->pBufferPtr); RS_Reset_RX_Flags(_hRS_); RS_Reset_TX_Flags(_hRS_);
//#define MB_Is_RX_Busy(_hRS_) ((_hRS_->huart->gState&HAL_USART_STATE_BUSY_RX) == HAL_USART_STATE_BUSY_RX)
//#define MB_Is_TX_Busy(_hRS_) ((_hRS_->huart->gState&HAL_USART_STATE_BUSY_RX) == HAL_USART_STATE_BUSY_TX)
#define RS_Is_RX_Busy(_hRS_) (_hRS_->f.RX_Busy == 1)
#define RS_Is_TX_Busy(_hRS_) (_hRS_->f.TX_Busy == 1)
#ifndef RS_EnableReceive
#define RS_EnableReceive()
#endif
#ifndef RS_EnableTransmit
#define RS_EnableTransmit()
#endif
////////////////////////////---DEFINES---////////////////////////////
/////////////////////////////////////////////////////////////////////
///////////////////////---STRUCTURES & ENUMS---//////////////////////
//------------------ENUMERATIONS--------------------
/** @brief Enums for respond CMD about RS status */
typedef enum // RS_StatusTypeDef
{
/* IN-CODE STATUS (start from 0x01, and goes up)*/
/*0x01*/ RS_OK = 0x01,
/*0x02*/ RS_ERR,
/*0x03*/ RS_ABORTED,
/*0x04*/ RS_BUSY,
/*0x05*/ RS_SKIP,
/*0x06*/ RS_COLLECT_MSG_ERR,
/*0x07*/ RS_PARSE_MSG_ERR,
// reserved values
// /*0x00*/ RS_UNKNOWN_ERR = 0x00, ///< reserved for case, if no one error founded (nothing changed response from zero)
}RS_StatusTypeDef;
/** @brief Enums for RS Modes */
typedef enum // RS_ModeTypeDef
{
SLAVE_ALWAYS_WAIT = 0x01, ///< Slave mode with infinity waiting
SLAVE_TIMEOUT_WAIT = 0x02, ///< Slave mode with waiting with timeout
// MASTER = 0x03, ///< Master mode
}RS_ModeTypeDef;
/** @brief Enums for RS UART Modes */
typedef enum // RS_ITModeTypeDef
{
BLCK_MODE = 0x00, ///< Blocking mode
IT_MODE = 0x01, ///< Interrupt mode
}RS_ITModeTypeDef;
/** @brief Enums for Abort modes */
typedef enum // RS_AbortTypeDef
{
ABORT_TX = 0x01, ///< Abort transmit
ABORT_RX = 0x02, ///< Abort receive
ABORT_RX_TX = 0x03, ///< Abort receive and transmit
ABORT_RS = 0x04, ///< Abort uart and reset RS structure
}RS_AbortTypeDef;
/** @brief Enums for RX Size modes */
typedef enum // RS_RXSizeTypeDef
{
RS_RX_Size_Const = 0x01, ///< size of receiving message is constant
RS_RX_Size_NotConst = 0x02, ///< size of receiving message isnt constant
}RS_RXSizeTypeDef;
//-----------STRUCTURE FOR HANDLE RS------------
/** @brief Struct for flags RS */
typedef struct
{
unsigned RX_Half:1; ///< flag: 0 - receiving msg before ByteCnt, 0 - receiving msg after ByteCnt
unsigned RS_Busy:1; ///< flag: 1 - RS is busy, 0 - RS isnt busy
unsigned RX_Ongoing:1; ///< flag: 1 - receiving data right now, 0 - waiting for receiving data
unsigned RX_Busy:1; ///< flag: 1 - receiving is active, 0 - receiving isnt active
unsigned TX_Busy:1; ///< flag: 1 - transmiting is active, 0 - transmiting isnt active
unsigned RX_Done:1; ///< flag: 1 - receiving is done, 0 - receiving isnt done
unsigned TX_Done:1; ///< flag: 1 - transmiting is done, 0 - transmiting isnt done
// setted by user
unsigned MessageHandled:1; ///< flag: 1 - RS command is handled, 0 - RS command isnt handled yet
unsigned EchoResponse:1; ///< flag: 1 - response with received msg, 0 - response with own msg
unsigned DeferredResponse:1; ///< flag: 1 - response not in interrupt, 0 - response in interrupt
unsigned ReInit_UART:1; ///< flag: 1 - need to reinitialize uart, 0 - nothing
}RS_FlagsTypeDef;
/**
* @brief Handle for RS communication.
* @note Prefixes: h - handle, s - settings, f - flag
*/
typedef struct // RS_HandleTypeDef
{
/* MESSAGE */
uint8_t ID; ///< ID of RS "channel"
RS_MsgTypeDef *pMessagePtr; ///< pointer to message struct
uint8_t *pBufferPtr; ///< pointer to message buffer
uint32_t RS_Message_Size; ///< size of whole message, not only data
/* HANDLERS and SETTINGS */
UART_HandleTypeDef *huart; ///< handler for used uart
TIM_HandleTypeDef *htim; ///< handler for used tim
RS_ModeTypeDef sRS_Mode; ///< setting: slave or master @ref RS_ModeTypeDef
RS_ITModeTypeDef sRS_IT_Mode; ///< setting: 1 - IT mode, 0 - Blocking mode
uint16_t sRS_Timeout; ///< setting: timeout in ms
RS_RXSizeTypeDef sRS_RX_Size_Mode; ///< setting: 1 - not const, 0 - const
/* FLAGS */
RS_FlagsTypeDef f; ///< These flags for controling receive/transmit
/* RS STATUS */
RS_StatusTypeDef RS_STATUS; ///< RS status
RS_TrackerTypeDef rs_err;
}RS_HandleTypeDef;
extern RS_HandleTypeDef hmodbus1;
///////////////////////---STRUCTURES & ENUMS---//////////////////////
/////////////////////////////////////////////////////////////////////
///////////////////////////---FUNCTIONS---///////////////////////////
//----------------FUNCTIONS FOR PROCESSING MESSAGE-------------------
/*--------------------Defined by users purposes--------------------*/
/* Respond accord to received message */
RS_StatusTypeDef RS_Response(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
/* Collect message in buffer to transmit it */
RS_StatusTypeDef RS_Collect_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff);
/* Parse message from buffer to process it */
RS_StatusTypeDef RS_Parse_Message(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg, uint8_t *msg_uart_buff);
/* Define size of RX Message that need to be received */
RS_StatusTypeDef RS_Define_Size_of_RX_Message(RS_HandleTypeDef *hRS, uint32_t *rx_data_size);
//-------------------------GENERAL FUNCTIONS-------------------------
/*-----------------Should be called from main code-----------------*/
/* Start receive IT */
RS_StatusTypeDef RS_Receive_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
/* Start transmit IT */
RS_StatusTypeDef RS_Transmit_IT(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
/* Initialize UART and handle RS stucture */
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart, TIM_SettingsTypeDef *stim, uint8_t *pRS_BufferPtr);
#else
RS_StatusTypeDef RS_Init(RS_HandleTypeDef *hRS, UART_HandleTypeDef *huart, TIM_HandleTypeDef *htim, uint8_t *pRS_BufferPtr);
#endif
/* ReInitialize UART and RS receive */
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_SettingsTypeDef *suart);
#else
HAL_StatusTypeDef RS_ReInit_UART(RS_HandleTypeDef *hRS, UART_HandleTypeDef *suart);
#endif
/* Abort RS/UART */
RS_StatusTypeDef RS_Abort(RS_HandleTypeDef *hRS, RS_AbortTypeDef AbortMode);
//-------------------------GENERAL FUNCTIONS-------------------------
//-------------------------------------------------------------------
//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
/* Handle for starting receive */
RS_StatusTypeDef RS_Handle_Receive_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
/* Handle for starting transmit */
RS_StatusTypeDef RS_Handle_Transmit_Start(RS_HandleTypeDef *hRS, RS_MsgTypeDef *RS_msg);
/* UART RX Callback: define behaviour after receiving parts of message */
RS_StatusTypeDef RS_UART_RxCpltCallback(RS_HandleTypeDef *hRS);
/* UART TX Callback: define behaviour after transmiting message */
RS_StatusTypeDef RS_UART_TxCpltCallback(RS_HandleTypeDef *hRS);
/* Handler for UART */
void RS_UART_Handler(RS_HandleTypeDef *hRS);
/* Handler for TIM */
void RS_TIM_Handler(RS_HandleTypeDef *hRS);
//--------------------CALLBACK/HANDLER FUNCTIONS---------------------
///////////////////////////---FUNCTIONS---///////////////////////////
#ifndef printf_rs_err
#define printf_rs_err(...)
#endif
#ifndef printf_rs
#define printf_rs(...)
#endif
#endif // __RS_LIB_H_

249
diode_tester/Core/MyLibs/bit_access.h Normal file
View File

@ -0,0 +1,249 @@
/**
**************************************************************************
* @file mylibs_defs.h
* @brief Заголочный файл для дефайнов библиотеки MyLibsGeneral.
**************************************************************************
* @defgroup BIT_ACCESS_DEFINES Bit access defines
* @ingroup MYLIBS_DEFINES
* @brief Всякое для доступа к битам в unsigned
*************************************************************************/
#ifndef __BIT_ACCESS_H_
#define __BIT_ACCESS_H_
#include "mylibs_defs.h"
/**
* @addtogroup BIT_ACCESS_TYPEDEF Byte access typedefs
* @ingroup BIT_ACCESS_DEFINES
* @brief Дефайны юнионов для обращения к битам.
@{
*/
typedef union
{
uint8_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned reserved:4;
}bit;
}uint4_BitTypeDef;
typedef union
{
uint8_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned bit4:1;
unsigned reserved:3;
}bit;
}uint5_BitTypeDef;
typedef union
{
uint8_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned bit4:1;
unsigned bit5:1;
unsigned reserved:2;
}bit;
}uint6_BitTypeDef;
typedef union
{
uint8_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned bit4:1;
unsigned bit5:1;
unsigned bit6:1;
unsigned reserved:1;
}bit;
}uint7_BitTypeDef;
typedef union
{
uint8_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned bit4:1;
unsigned bit5:1;
unsigned bit6:1;
unsigned bit7:1;
}bit;
}uint8_BitTypeDef;
typedef union
{
uint16_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned bit4:1;
unsigned bit5:1;
unsigned bit6:1;
unsigned bit7:1;
unsigned bit8:1;
unsigned bit9:1;
unsigned bit10:1;
unsigned bit11:1;
unsigned bit12:1;
unsigned bit13:1;
unsigned bit14:1;
unsigned bit15:1;
}bit;
}uint16_BitTypeDef;
typedef union
{
uint32_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned bit4:1;
unsigned bit5:1;
unsigned bit6:1;
unsigned bit7:1;
unsigned bit8:1;
unsigned bit9:1;
unsigned bit10:1;
unsigned bit11:1;
unsigned bit12:1;
unsigned bit13:1;
unsigned bit14:1;
unsigned bit15:1;
unsigned bit16:1;
unsigned bit17:1;
unsigned bit18:1;
unsigned bit19:1;
unsigned bit20:1;
unsigned bit21:1;
unsigned bit22:1;
unsigned bit23:1;
unsigned bit24:1;
unsigned bit25:1;
unsigned bit26:1;
unsigned bit27:1;
unsigned bit28:1;
unsigned bit29:1;
unsigned bit30:1;
unsigned bit31:1;
}bit;
}uint32_BitTypeDef;
typedef union
{
uint64_t all;
struct
{
unsigned bit0:1;
unsigned bit1:1;
unsigned bit2:1;
unsigned bit3:1;
unsigned bit4:1;
unsigned bit5:1;
unsigned bit6:1;
unsigned bit7:1;
unsigned bit8:1;
unsigned bit9:1;
unsigned bit10:1;
unsigned bit11:1;
unsigned bit12:1;
unsigned bit13:1;
unsigned bit14:1;
unsigned bit15:1;
unsigned bit16:1;
unsigned bit17:1;
unsigned bit18:1;
unsigned bit19:1;
unsigned bit20:1;
unsigned bit21:1;
unsigned bit22:1;
unsigned bit23:1;
unsigned bit24:1;
unsigned bit25:1;
unsigned bit26:1;
unsigned bit27:1;
unsigned bit28:1;
unsigned bit29:1;
unsigned bit30:1;
unsigned bit31:1;
unsigned bit32:1;
unsigned bit33:1;
unsigned bit34:1;
unsigned bit35:1;
unsigned bit36:1;
unsigned bit37:1;
unsigned bit38:1;
unsigned bit39:1;
unsigned bit40:1;
unsigned bit41:1;
unsigned bit42:1;
unsigned bit43:1;
unsigned bit44:1;
unsigned bit45:1;
unsigned bit46:1;
unsigned bit47:1;
unsigned bit48:1;
unsigned bit49:1;
unsigned bit50:1;
unsigned bit51:1;
unsigned bit52:1;
unsigned bit53:1;
unsigned bit54:1;
unsigned bit55:1;
unsigned bit56:1;
unsigned bit57:1;
unsigned bit58:1;
unsigned bit59:1;
unsigned bit60:1;
unsigned bit61:1;
unsigned bit62:1;
unsigned bit63:1;
}bit;
}uint64_BitTypeDef;
/** BIT_ACCESS_TYPEDEF
* @}
*/
/**
* @addtogroup BIT_ACCESS_FUNCTIONS Byte access functions
* @ingroup BIT_ACCESS_DEFINES
* @brief Дефайны для обращения к битам в unsigned.
@{
*/
#define uint8_bit(_uint8_, _bit_) (*(uint8_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
#define uint16_bit(_uint8_, _bit_) (*(uint16_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
#define uint32_bit(_uint8_, _bit_) (*(uint32_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
#define uint64_bit(_uint8_, _bit_) (*(uint64_BitTypeDef *)(&(_uint8_))).bit.bit##_bit_
/** BIT_ACCESS_FUNCTIONS
* @}
*/
#endif //__BIT_ACCESS_H_

36
diode_tester/Core/MyLibs/mylibs_config.h Normal file
View File

@ -0,0 +1,36 @@
/**
**************************************************************************
* @file mylibs_config.h
* @brief Конфигурации для библиотек MyLibs
**************************************************************************
* @defgroup MYLIBS_CONFIG Configs My Libs
* @ingroup MYLIBS_ALL
* @brief Конфигурации для библиотек MyLibs
@{
*************************************************************************/
#ifndef __MYLIBS_CONFIG_H_
#define __MYLIBS_CONFIG_H_
#include "stm32f1xx_hal.h"
// user includes
#include "interface_config.h"
#include "tester_config.h"
#define RS_USER_VARS_NUMB 0
#define ADC_USER_VARS_NUMB 0
#define ADC_CH_USER_VARS_NUMB 0
#define INCLUDE_BIT_ACCESS_LIB
#define INCLUDE_TRACKERS_LIB
#define INCLUDE_TRACE_LIB
//#define INCLUDE_GENERAL_PERIPH_LIBS
//#define FREERTOS_DELAY
/** MYLIBS_CONFIG
* @}
*/
#endif //__MYLIBS_CONFIG_H_

106
diode_tester/Core/MyLibs/mylibs_defs.h Normal file
View File

@ -0,0 +1,106 @@
/**
**************************************************************************
* @file mylibs_defs.h
* @brief Заголочный файл для дефайнов библиотеки MyLibsGeneral.
**************************************************************************
* @defgroup MYLIBS_DEFINES My Libs defines
* @brief Базовые дефайны для всего проекта
*
*************************************************************************/
#ifndef __MYLIBS_DEFINES_H_
#define __MYLIBS_DEFINES_H_
#include "stm32f1xx_hal.h"
#include "mylibs_config.h"
/***************************************************************************
******************************ERROR_HANDLER********************************/
/**
* @addtogroup ERROR_HANDLER_DEFINES Error Handler defines
* @ingroup MYLIBS_DEFINES
* @brief Дефайны для определения функции обработки ошибок
@{
*/
/* extern Error_Handler from main.h */
extern void Error_Handler(void);
/* Define error handler for MyLibs */
#define MyLibs_Error_Handler(_params_) Error_Handler(_params_)
/* If error handler not defined - set void */
#ifndef MyLibs_Error_Handler
#define ((void)0U)
#endif // MyLibs_Error_Handler
/** ERROR_HANDLER_DEFINES
* @}
*/
/***************************************************************************
********************************ACCESS_DEFINES*****************************/
#define ClearStruct(_struct_) memset(&(_struct_), 0, sizeof(_struct_))
/***************************************************************************
******************************DELAYS_DEFINES*******************************/
/**
* @addtogroup DELAYS_DEFINES Delays defines
* @ingroup MYLIBS_DEFINES
* @brief Дефайны для реализации задержек
@{
*/
#ifdef FREERTOS_DELAY
#define msDelay(_ms_) osDelay(_ms_)
#else
#define msDelay(_ms_) HAL_Delay(_ms_)
#endif
/** DELAYS_DEFINES
* @}
*/
/***************************************************************************
*******************************MATH_DEFINES********************************/
/**
* @addtogroup MATH_DEFINES Math defines
* @ingroup MYLIBS_DEFINES
* @brief Дефайны для различных математических функций
@{
*/
/**
* @brief Calc dividing including remainder
* @param _val_ - делимое.
* @param _div_ - делитель.
* @details Если результат деления без остатка: он возвращается как есть
Если с остатком - округляется вверх
*/
//#define Divide_Up(_val_, _div_) (((_val_)%(_div_))? (_val_)/(_div_)+1 : (_val_)/_div_) /* через тернарный оператор */
#define Divide_Up(_val_, _div_) ((_val_ - 1) / _div_) + 1 /* через мат выражение */
/**
* @brief Swap between Little Endian and Big Endian
* @param v - Переменная для свапа.
* @return v (new) - Свапнутая переменная.
* @details Переключения между двумя типами хранения слова: HI-LO байты и LO-HI байты.
*/
#define ByteSwap16(v) (((v&0xFF00) >> (8)) | ((v&0x00FF) << (8)))
/**
* @brief Absolute
* @param x - Переменная для модудя.
* @return x (new) - Число по модулю.
* @details Берет число по модулю. Хз как работает библиотечный abs в stdlib.h, мб это быстрее, но вряд ли конечно.
*/
#define ABS(x) ( ((x) > 0)? (x) : -(x))?
/** MATH_DEFINES
* @}
*/
#endif //__MYLIBS_DEFINES_H_

79
diode_tester/Core/MyLibs/mylibs_include.h Normal file
View File

@ -0,0 +1,79 @@
/**
**************************************************************************
* @file mylibs_include.h
* @brief Заголочный файл для всех библиотек
**************************************************************************
@details
Здесь нужно собрать библиотеки и дефайны, которые должны быть видны во всем проекте,
чтобы не подключать 100 инклюдов в каждом ".c" файле
**************************************************************************
* @defgroup MYLIBS_ALL My Libs
* @brief Все используемые MyLibs библиотеки
*
*************************************************************************/
#ifndef __MYLIBS_INCLUDE_H_
#define __MYLIBS_INCLUDE_H_
#include "mylibs_defs.h"
#ifdef ARM_MATH_CM4
#include "arm_math.h"
#endif
#ifdef INCLUDE_BIT_ACCESS_LIB
#include "bit_access.h"
#endif
#ifdef INCLUDE_TRACKERS_LIB
#include "trackers.h"
#endif
#ifdef INCLUDE_TRACE_LIB
#include "trace.h"
#endif
#ifdef INCLUDE_GENERAL_PERIPH_LIBS
#include "general_flash.h"
#include "general_gpio.h"
#ifdef HAL_SPI_MODULE_ENABLED
#include "general_spi.h"
#endif
#ifdef HAL_UART_MODULE_ENABLED
#include "general_uart.h"
#endif
#ifdef HAL_TIM_MODULE_ENABLED
#include "general_tim.h"
#endif
#endif //INCLUDE_GENERAL_PERIPH_LIBS
/////////////////////////---USER SETTINGS---/////////////////////////
// user includes
#include "stdlib.h"
#include "string.h"
#include "stdio.h"
#include "math.h"
#include "main.h"
#include "modbus_data.h"
/** @brief Struct for trackers for Measure */
/** @brief Struct for trackers for RS */
typedef TrackerTypeDef(RS_USER_VARS_NUMB) RS_TrackerTypeDef;
/** @brief Struct for trackers for ADC */
typedef TrackerTypeDef(ADC_USER_VARS_NUMB) ADC_TrackerTypeDef;
/** @brief Struct for trackers for ADC Channel */
typedef TrackerTypeDef(ADC_CH_USER_VARS_NUMB) ADCChannel_TrackerTypeDef;
/////////////////////////---USER SETTINGS---/////////////////////////
#endif // __MYLIBS_INCLUDE_H_

80
diode_tester/Core/MyLibs/trace.h Normal file
View File

@ -0,0 +1,80 @@
/**
**************************************************************************
* @file trace.h
* @brief Заголочный файл для работы с трассировкой.
**************************************************************************
* @addtogroup TRACE Trace defines
* @ingroup MYLIBS_DEFINES
* @brief Дефайны для работы с трассировкой
*************************************************************************/
#ifndef __TRACE_H_
#define __TRACE_H_
#include "mylibs_defs.h"
/**
* @addtogroup TRACE_SERIAL Serial trace defines
* @ingroup TRACE
* @brief Дефайны для работы с serial трассировкой
* @details Определяется дефайн my_printf() для работы с serial трассировкой:
- для RTT это будет вызов функции SEGGER_RTT_printf(), с подключением библиотеки SEGGER_RTT.h
- для SWO это будет просто printf(), но библиотеку STDOUT надо подключить самостоятельно:
@verbatim
Manage Run-Time Environment -> Compiler -> I/O -> STDOUT
@endverbatim
- Если трассировка отключена, то все дефайны определяются как 'ничего' и на производительность кода не влияют
@{
*/
/* Выбор какой serial trace использовать */
#ifdef SERIAL_TRACE_ENABLE
#if defined(RTT_TRACE_ENABLE)
#undef SWO_TRACE_ENABLE
#include "SEGGER_RTT.h"
#define my_printf(...) SEGGER_RTT_printf(0, __VA_ARGS__)
#elif defined(SWO_TRACE_ENABLE)
#undef RTT_TRACE_ENABLE
#define my_printf(...) printf(__VA_ARGS__)
#else // NO_TRACE
#define my_printf(...)
#warning No trace is selected. Serial debug wont work.
#endif // RTT_TRACE_ENABLE/SWO_TRACE_ENABLE/NO_TRACE
#else //SERIAL_TRACE_ENABLE
#define my_printf(...)
#undef RTT_TRACE_ENABLE
#undef SWO_TRACE_ENABLE
#endif //SERIAL_TRACE_ENABLE
/** TRACE_SERIAL
* @}
*/
/**
* @addtogroup TRACE_GPIO GPIO trace defines
* @ingroup TRACE
* @brief Дефайны для работы с GPIO трассировкой
* @details Определяется дефайны для работы с GPIO трассировкой:
- TRACE_GPIO_RESET() - для сброса ножки GPIO (через BSRR)
- TRACE_GPIO_SET() - для выставления ножки GPIO (через BSRR)
- Если трассировка отключена, то все дефайны определяются как 'ничего' и на производительность кода не влияют
@{
*/
#ifndef GPIO_TRACE_ENABLE
#define TRACE_GPIO_RESET(_gpio_,_pin_)
#define TRACE_GPIO_SET(_gpio_,_pin_)
#else
#define TRACE_GPIO_RESET(_gpio_,_pin_) (_gpio_)->BSRR = ((_pin_)<<16)
#define TRACE_GPIO_SET(_gpio_,_pin_) (_gpio_)->BSRR = (((_pin_)))
#endif //GPIO_TRACE_ENABLE
/** TRACE_GPIO
* @}
*/
#endif //__TRACE_H_

141
diode_tester/Core/MyLibs/trackers.h Normal file
View File

@ -0,0 +1,141 @@
/**
**************************************************************************
* @file mylibs_defs.h
* @brief Заголочный файл для дефайнов библиотеки MyLibsGeneral.
**************************************************************************
* @defgroup MYLIBS_DEFINES My Libs defines
* @brief Базовые дефайны для всего проекта
*
*************************************************************************/
#ifndef __TRACKERS_H_
#define __TRACKERS_H_
#include "mylibs_defs.h"
/**
* @addtogroup TRACKERS Trackers defines
* @ingroup MYLIBS_DEFINES
* @brief Дефайны для работы с трекерами
* @details Есть дефайн для объявления структуры трекера: TrackerTypeDef(num_user_vars).
Структура состоит из следующих элементов:
- cnt_ok
- cnt_err
- cnt_warn
- user[num_user_vars]
Также есть ряд функций (дефайнов) для обращения к элементам этой структуры.
Если трассировка отключена, то все дефайны определяются как ничего и на производительность кода не влияют
@par Пример:
Определяем typedef трекера измерений @ref Measure_TrackerTypeDef
@verbatim
typedef TrackerTypeDef(MEASURE_USER_VARS_NUMB) Measure_TrackerTypeDef;
@endverbatim
И через @ref Measure_TrackerTypeDef структура подключается в @ref TESTER_MeasureHandleTypeDef, а также
если необхожимо в другие структуру, например в структуру всех ошибок через указатель @ref TESTER_TrackerTypeDef
@{
*/
#ifdef TRACKERS_ENABLE
/**
* @brief Структура для счетчиков отладки
* @param num_user_vars - количество пользовательских счетчиков
* @details Содержит счетчик для успешных событый (cnt_ok),
* счетчик для ошибок (cnt_err), счетчик для предупреждений (cnt_warn).
*
* Также есть возможность объявить пользовательские счетчики в
* количестве <num_user_vars> штук.
*
* Для работы с структурой можно использовать функции:
* - TrackerCnt_Ok()
* - TrackerCnt_Err()
* - TrackerCnt_Warn()
* - TrackerCnt_User()
* - TrackerWrite_User()
* - TrackerClear_All()
* - TrackerClear_Ok()
* - TrackerClear_Err()
* - TrackerClear_Warn()
* - TrackerClear_User()
* - TrackerClear_UserAll()
*/
#define TrackerTypeDef(num_user_vars) \
struct \
{ \
uint32_t cnt_ok; \
uint32_t cnt_err; \
uint32_t cnt_warn; \
uint32_t user[num_user_vars]; \
}
/** @brief Получить количетство пользовательских переменных */
#define num_of_usercnts(_user_) (sizeof(_user_) / sizeof(_user_[0]))
/** @brief Проверка существует ли указанная пользовательская переменная */
#define assert_usertracker(_cntstruct_, _uservarnumb_) ((_uservarnumb_) < num_of_usercnts((_cntstruct_).user))
/** @brief Условие для проверки существует ли указанная пользовательская переменная */
#define if_assert_usertracker(_cntstruct_, _uservarnumb_) if(assert_usertracker(_cntstruct_, _uservarnumb_))
/** @brief Тернарный оператор для проверки существует ли указанная пользовательская переменная */
#define tern_assert_usertracker(_cntstruct_, _uservarnumb_) (assert_usertracker(_cntstruct_, _uservarnumb_)) ? _uservarnumb_ : 0
/**
* @brief Запись числа в пользовательскую переменную
* @note Здесь нет проверки - существует ли пользовательская переменная!
* Есть возможность выйти за границы структуры!!!
* Чтобы этого избежать используете дефайн #ref assert_usertracker()
*/
#define TrackerGet_User(_cntstruct_, _uservarnumb_) (_cntstruct_).user[tern_assert_usertracker(_cntstruct_, _uservarnumb_)]
/** @brief Инкрементирование счетчика успешных событий */
#define TrackerCnt_Ok(_cntstruct_) (_cntstruct_).cnt_ok++
/** @brief Инкрементирование счетчика ошибок */
#define TrackerCnt_Err(_cntstruct_) (_cntstruct_).cnt_err++
/** @brief Инкрементирование счетчика предупреждений */
#define TrackerCnt_Warn(_cntstruct_) (_cntstruct_).cnt_warn++
/** @brief Инкрементирование пользовательской переменной */
#define TrackerCnt_User(_cntstruct_, _uservarnumb_) if_assert_usertracker(_cntstruct_, _uservarnumb_) (_cntstruct_).user[_uservarnumb_]++;
/** @brief Запись числа в пользовательскую переменную */
#define TrackerWrite_User(_cntstruct_, _uservarnumb_, _val_) if_assert_usertracker(_cntstruct_, _uservarnumb_) (_cntstruct_).user[_uservarnumb_] = (_val_)
/** @brief Очистка всей структуры */
#define TrackerClear_All(_cntstruct_) memset(&(_cntstruct_), 0, sizeof(_cntstruct_))
/** @brief Очистка счетчика успешных событий */
#define TrackerClear_Ok(_cntstruct_) (_cntstruct_).cnt_ok = 0
/** @brief Очистка счетчика ошибок */
#define TrackerClear_Err(_cntstruct_) (_cntstruct_).cnt_err = 0
/** @brief Очистка счетчика предупреждений */
#define TrackerClear_Warn(_cntstruct_) (_cntstruct_).cnt_warn = 0
/** @brief Очистка пользовательской переменной */
#define TrackerClear_User(_cntstruct_, _uservarnumb_) if_assert_usertracker(_cntstruct_, _uservarnumb_) (_cntstruct_).user[_uservarnumb_] = 0;
/** @brief Очистка всех пользовательских переменных */
#define TrackerClear_UserAll(_cntstruct_) memset(&(_cntstruct_).user, 0, sizeof((_cntstruct_).user))
#else //TRACKERS_ENABLE
#define TrackerTypeDef(num_user_vars) void *
#define num_of_usercnts(_user_)
#define assert_tracecnt(_cntstruct_, _uservarnumb_)
#define TrackerCnt_Ok(_cntstruct_)
#define TrackerCnt_Err(_cntstruct_)
#define TrackerCnt_Warn(_cntstruct_)
#define TrackerCnt_User(_cntstruct_, _uservarnumb_)
#define TrackerWrite_User(_cntstruct_, _uservarnumb_, _val_)
/** @brief Очистка всей структуры */
#define TrackerClear_All(_cntstruct_)
#define TrackerClear_Ok(_cntstruct_)
#define TrackerClear_Err(_cntstruct_)
#define TrackerClear_Warn(_cntstruct_)
#define TrackerClear_User(_cntstruct_)
#define TrackerClear_UserAll(_cntstruct_)
#endif //TRACKERS_ENABLE
#endif //__TRACKERS_H_

6
diode_tester/Core/Src/adc.c
View File

@ -45,9 +45,9 @@ void MX_ADC1_Init(void)
*/ */
hadc1.Instance = ADC1; hadc1.Instance = ADC1;
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc1.Init.ContinuousConvMode = DISABLE; hadc1.Init.ContinuousConvMode = ENABLE;
hadc1.Init.DiscontinuousConvMode = DISABLE; hadc1.Init.DiscontinuousConvMode = DISABLE;
hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T3_TRGO; hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc1.Init.NbrOfConversion = 1; hadc1.Init.NbrOfConversion = 1;
if (HAL_ADC_Init(&hadc1) != HAL_OK) if (HAL_ADC_Init(&hadc1) != HAL_OK)
@ -98,7 +98,7 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
hdma_adc1.Init.MemInc = DMA_MINC_ENABLE; hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD; hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD; hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
hdma_adc1.Init.Mode = DMA_NORMAL; hdma_adc1.Init.Mode = DMA_CIRCULAR;
hdma_adc1.Init.Priority = DMA_PRIORITY_LOW; hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
if (HAL_DMA_Init(&hdma_adc1) != HAL_OK) if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
{ {

13
diode_tester/Core/Src/gpio.c
View File

@ -42,10 +42,23 @@
void MX_GPIO_Init(void) void MX_GPIO_Init(void)
{ {
GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */ /* GPIO Ports Clock Enable */
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_RESET);
/*Configure GPIO pin : PC13 */
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
} }
/* USER CODE BEGIN 2 */ /* USER CODE BEGIN 2 */

24
diode_tester/Core/Src/main.c
View File

@ -21,11 +21,13 @@
#include "adc.h" #include "adc.h"
#include "dma.h" #include "dma.h"
#include "tim.h" #include "tim.h"
#include "usart.h"
#include "gpio.h" #include "gpio.h"
/* Private includes ----------------------------------------------------------*/ /* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "rs_message.h"
#include "tester_adc_func.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/ /* Private typedef -----------------------------------------------------------*/
@ -58,6 +60,10 @@ void SystemClock_Config(void);
/* Private user code ---------------------------------------------------------*/ /* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */ /* USER CODE BEGIN 0 */
int delay = 250;
int delay_en = 1;
int before_pulse_delay = 50;
int pulse_delay = 10;
/* USER CODE END 0 */ /* USER CODE END 0 */
/** /**
@ -92,14 +98,28 @@ int main(void)
MX_DMA_Init(); MX_DMA_Init();
MX_ADC1_Init(); MX_ADC1_Init();
MX_TIM3_Init(); MX_TIM3_Init();
MX_USART1_UART_Init();
MX_TIM2_Init();
/* USER CODE BEGIN 2 */ /* USER CODE BEGIN 2 */
// HAL_ADC_Start_DMA(&hadc1, (uint32_t *)buff, ADC_BUFF_SIZE);
// HAL_TIM_Base_Start_IT(&htim3);
TESTER_ADC_StructInit(&tester_adc);
/* USER CODE END 2 */ /* USER CODE END 2 */
/* Infinite loop */ /* Infinite loop */
/* USER CODE BEGIN WHILE */ /* USER CODE BEGIN WHILE */
while (1) while (1)
{ {
if(delay_en)
msDelay(delay);
// HAL_UART_Transmit(&huart1, (uint8_t *)"axaxa", 5, 100);
ADC_DMA_StartRead(&tester_adc);
for(int i = 0; i < before_pulse_delay; i++);
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, 1);
for(int i = 0; i < pulse_delay; i++);
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, 0);
ADC_DMA_ReadWhileDMA(&tester_adc, 1000);
/* USER CODE END WHILE */ /* USER CODE END WHILE */
/* USER CODE BEGIN 3 */ /* USER CODE BEGIN 3 */

36
diode_tester/Core/Src/stm32f1xx_it.c
View File

@ -22,6 +22,7 @@
#include "stm32f1xx_it.h" #include "stm32f1xx_it.h"
/* Private includes ----------------------------------------------------------*/ /* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "tester_adc_func.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/ /* Private typedef -----------------------------------------------------------*/
@ -56,9 +57,12 @@
/* External variables --------------------------------------------------------*/ /* External variables --------------------------------------------------------*/
extern DMA_HandleTypeDef hdma_adc1; extern DMA_HandleTypeDef hdma_adc1;
extern TIM_HandleTypeDef htim2;
extern TIM_HandleTypeDef htim3; extern TIM_HandleTypeDef htim3;
extern UART_HandleTypeDef huart1;
/* USER CODE BEGIN EV */ /* USER CODE BEGIN EV */
/* USER CODE END EV */ /* USER CODE END EV */
/******************************************************************************/ /******************************************************************************/
@ -205,7 +209,7 @@ void SysTick_Handler(void)
void DMA1_Channel1_IRQHandler(void) void DMA1_Channel1_IRQHandler(void)
{ {
/* USER CODE BEGIN DMA1_Channel1_IRQn 0 */ /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
ADC_DMA_Handler(&tester_adc);
/* USER CODE END DMA1_Channel1_IRQn 0 */ /* USER CODE END DMA1_Channel1_IRQn 0 */
HAL_DMA_IRQHandler(&hdma_adc1); HAL_DMA_IRQHandler(&hdma_adc1);
/* USER CODE BEGIN DMA1_Channel1_IRQn 1 */ /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
@ -213,13 +217,27 @@ void DMA1_Channel1_IRQHandler(void)
/* USER CODE END DMA1_Channel1_IRQn 1 */ /* USER CODE END DMA1_Channel1_IRQn 1 */
} }
/**
* @brief This function handles TIM2 global interrupt.
*/
void TIM2_IRQHandler(void)
{
/* USER CODE BEGIN TIM2_IRQn 0 */
/* USER CODE END TIM2_IRQn 0 */
HAL_TIM_IRQHandler(&htim2);
/* USER CODE BEGIN TIM2_IRQn 1 */
/* USER CODE END TIM2_IRQn 1 */
}
/** /**
* @brief This function handles TIM3 global interrupt. * @brief This function handles TIM3 global interrupt.
*/ */
void TIM3_IRQHandler(void) void TIM3_IRQHandler(void)
{ {
/* USER CODE BEGIN TIM3_IRQn 0 */ /* USER CODE BEGIN TIM3_IRQn 0 */
HAL_NVIC_ClearPendingIRQ(TIM3_IRQn);
/* USER CODE END TIM3_IRQn 0 */ /* USER CODE END TIM3_IRQn 0 */
HAL_TIM_IRQHandler(&htim3); HAL_TIM_IRQHandler(&htim3);
/* USER CODE BEGIN TIM3_IRQn 1 */ /* USER CODE BEGIN TIM3_IRQn 1 */
@ -227,6 +245,20 @@ void TIM3_IRQHandler(void)
/* USER CODE END TIM3_IRQn 1 */ /* USER CODE END TIM3_IRQn 1 */
} }
/**
* @brief This function handles USART1 global interrupt.
*/
void USART1_IRQHandler(void)
{
/* USER CODE BEGIN USART1_IRQn 0 */
/* USER CODE END USART1_IRQn 0 */
HAL_UART_IRQHandler(&huart1);
/* USER CODE BEGIN USART1_IRQn 1 */
/* USER CODE END USART1_IRQn 1 */
}
/* USER CODE BEGIN 1 */ /* USER CODE BEGIN 1 */
/* USER CODE END 1 */ /* USER CODE END 1 */

74
diode_tester/Core/Src/tim.c
View File

@ -24,8 +24,49 @@
/* USER CODE END 0 */ /* USER CODE END 0 */
TIM_HandleTypeDef htim2;
TIM_HandleTypeDef htim3; TIM_HandleTypeDef htim3;
/* TIM2 init function */
void MX_TIM2_Init(void)
{
/* USER CODE BEGIN TIM2_Init 0 */
/* USER CODE END TIM2_Init 0 */
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
/* USER CODE BEGIN TIM2_Init 1 */
/* USER CODE END TIM2_Init 1 */
htim2.Instance = TIM2;
htim2.Init.Prescaler = 0;
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
htim2.Init.Period = 65535;
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
{
Error_Handler();
}
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
{
Error_Handler();
}
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM2_Init 2 */
/* USER CODE END TIM2_Init 2 */
}
/* TIM3 init function */ /* TIM3 init function */
void MX_TIM3_Init(void) void MX_TIM3_Init(void)
{ {
@ -70,7 +111,22 @@ void MX_TIM3_Init(void)
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle) void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
{ {
if(tim_baseHandle->Instance==TIM3) if(tim_baseHandle->Instance==TIM2)
{
/* USER CODE BEGIN TIM2_MspInit 0 */
/* USER CODE END TIM2_MspInit 0 */
/* TIM2 clock enable */
__HAL_RCC_TIM2_CLK_ENABLE();
/* TIM2 interrupt Init */
HAL_NVIC_SetPriority(TIM2_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(TIM2_IRQn);
/* USER CODE BEGIN TIM2_MspInit 1 */
/* USER CODE END TIM2_MspInit 1 */
}
else if(tim_baseHandle->Instance==TIM3)
{ {
/* USER CODE BEGIN TIM3_MspInit 0 */ /* USER CODE BEGIN TIM3_MspInit 0 */
@ -90,7 +146,21 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle) void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
{ {
if(tim_baseHandle->Instance==TIM3) if(tim_baseHandle->Instance==TIM2)
{
/* USER CODE BEGIN TIM2_MspDeInit 0 */
/* USER CODE END TIM2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM2_CLK_DISABLE();
/* TIM2 interrupt Deinit */
HAL_NVIC_DisableIRQ(TIM2_IRQn);
/* USER CODE BEGIN TIM2_MspDeInit 1 */
/* USER CODE END TIM2_MspDeInit 1 */
}
else if(tim_baseHandle->Instance==TIM3)
{ {
/* USER CODE BEGIN TIM3_MspDeInit 0 */ /* USER CODE BEGIN TIM3_MspDeInit 0 */

122
diode_tester/Core/Src/usart.c Normal file
View File

@ -0,0 +1,122 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file usart.c
* @brief This file provides code for the configuration
* of the USART instances.
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "usart.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
UART_HandleTypeDef huart1;
/* USART1 init function */
void MX_USART1_UART_Init(void)
{
/* USER CODE BEGIN USART1_Init 0 */
/* USER CODE END USART1_Init 0 */
/* USER CODE BEGIN USART1_Init 1 */
/* USER CODE END USART1_Init 1 */
huart1.Instance = USART1;
huart1.Init.BaudRate = 115200;
huart1.Init.WordLength = UART_WORDLENGTH_8B;
huart1.Init.StopBits = UART_STOPBITS_1;
huart1.Init.Parity = UART_PARITY_NONE;
huart1.Init.Mode = UART_MODE_TX_RX;
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
if (HAL_UART_Init(&huart1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USART1_Init 2 */
/* USER CODE END USART1_Init 2 */
}
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(uartHandle->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspInit 0 */
/* USER CODE END USART1_MspInit 0 */
/* USART1 clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USART1 GPIO Configuration
PA9 ------> USART1_TX
PA10 ------> USART1_RX
*/
GPIO_InitStruct.Pin = GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_10;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USART1 interrupt Init */
HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART1_IRQn);
/* USER CODE BEGIN USART1_MspInit 1 */
/* USER CODE END USART1_MspInit 1 */
}
}
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
{
if(uartHandle->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspDeInit 0 */
/* USER CODE END USART1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART1_CLK_DISABLE();
/**USART1 GPIO Configuration
PA9 ------> USART1_TX
PA10 ------> USART1_RX
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
/* USART1 interrupt Deinit */
HAL_NVIC_DisableIRQ(USART1_IRQn);
/* USER CODE BEGIN USART1_MspDeInit 1 */
/* USER CODE END USART1_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

457
diode_tester/Core/Tester_main/tester_adc_func.c Normal file
View File

@ -0,0 +1,457 @@
#include "tester_adc_func.h"
#include "adc.h"
TESTER_ADCTypeDef tester_adc = {0};
uint16_t ADC_DMA_Buff[ADC_DMA_BUFF_SIZE];
uint16_t ADC_DMA_HalfBuff[ADC_DMA_BUFF_SIZE/2];
void ADC_DMA_Handler(TESTER_ADCTypeDef *adc)
{
int flag_parse_dma = 0;
int buff_start_ind = 0;
int buff_end_ind = 0;
if(adc->f.dmaHandlerbusy)
return;
adc->f.dmaHandlerbusy = 1;
__disable_irq();
if(DMA1->ISR & DMA_FLAG_HT1)
{
memcpy(ADC_DMA_HalfBuff, ADC_DMA_Buff, sizeof(ADC_DMA_HalfBuff));
adc->f.dmaBufferHalfDone = 1;
buff_start_ind = 0;
buff_end_ind = ADC_BUFF_SIZE/2;
flag_parse_dma = 1;
}
else if (DMA1->ISR & DMA_FLAG_TC1)
{
memcpy(ADC_DMA_HalfBuff, (ADC_DMA_Buff+ADC_DMA_BUFF_SIZE/2), sizeof(ADC_DMA_HalfBuff));
adc->f.dmaBufferHalfDone = 2;
buff_start_ind = ADC_BUFF_SIZE/2;
buff_end_ind = ADC_BUFF_SIZE;
flag_parse_dma = 1;
}
else
{
flag_parse_dma = 0;
TrackerCnt_Warn(adc->adc_err);
}
__enable_irq();
if(adc->f.enable_dmaBuffTransfer && flag_parse_dma)
{
int dma_ind = 0;
for(int buff_ind = buff_start_ind;
buff_ind < buff_end_ind;
buff_ind++)
{
adc->chAdc.ADC_Buff[buff_ind] = ADC_DMA_HalfBuff[dma_ind];
dma_ind += 1;
}
printf_adc_it("\n%d: ADC DMA IT Done %d-half", uwTick, adc->f.dmaBufferHalfDone);
adc->f.dmaHandlerbusy = 0;
TrackerCnt_Ok(adc->adc_err);
}
else
{
TrackerCnt_Warn(adc->adc_err);
}
}
void TESTER_ADC_StructInit(TESTER_ADCTypeDef *adc)
{
ClearStruct(*adc);
adc->hadc = &hadc1;
adc->chAdc.pulse_width = 4;
adc->filter.array_size = FOSTER_STUDENT_N;
adc->chAdc.ChMask = ADC_MEASURE_CHANNEL_0;
#ifdef FOSTER_STUDENT_USER_T_CRITICAL
adc->filter.t_critical = FOSTER_STUDENT_USER_T_CRITICAL;
#else
adc->filter.precise_table_ind = 2;
#endif
// adc->DMA_HalfBuff = ADC_DMA_HalfBuff;
// adc->DMA_Buff = ADC_DMA_Buff;
}
HAL_StatusTypeDef ADC_DMA_StartRead(TESTER_ADCTypeDef *adc)
{
HAL_StatusTypeDef res;
/* Очистка буферов каналов */
ClearStruct(adc->chAdc.ADC_Buff);
/* Очистка флага какая половина DMA уже готова */
adc->f.dmaBufferHalfDone = 0; // никакая, данные DMA пока не готовы в принципе
/* Разрешение заполнения буферов каналов */
adc->f.enable_dmaBuffTransfer = 1;
/* Выставления флага, что АЦП работает */
adc->f.adc_running = 1;
printf_adc("\n%d: ADC DMA Start", uwTick);
/* Старт АЦП с DMA */
res = HAL_ADC_Start_DMA(adc->hadc, (uint32_t *)ADC_DMA_Buff, ADC_DMA_BUFF_SIZE);
/* Если старт неудачен - запрет заполнения буферов каналов */
if(res != HAL_OK)
{
adc->f.enable_dmaBuffTransfer = 0;
adc->f.adc_running = 0;
}
return res;
}
HAL_StatusTypeDef ADC_DMA_StopRead(TESTER_ADCTypeDef *adc)
{
HAL_StatusTypeDef res;
if(adc->f.adc_running)
{
/* Остановка АЦП */
res = HAL_ADC_Stop_DMA(adc->hadc);
/* Очищение флагов АЦП */
adc->f.adc_running = 0;
adc->f.enable_dmaBuffTransfer = 0;
adc->f.dmaHandlerbusy = 0;
printf_adc("\n%d: ADC DMA Stop", uwTick);
}
return res;
}
void ADC_DMA_Fuel_Cell_Reset(TESTER_ADCChannelTypeDef *adc_fc)
{
adc_fc->ADC_Filtered = 0;
adc_fc->ADC_Max = 0;
adc_fc->ADC_Min = 0;
adc_fc->max_value_ind = 0;
adc_fc->state = 0;
}
void ADC_DMA_Channels_Prepare(TESTER_ADCChannelTypeDef *adc_fuel_cells, uint8_t MaskForChannels, uint8_t state)
{
for(int i = 0; i < 4; i++)
{
if(MaskForChannels&(1<<i))
{
ADC_DMA_Fuel_Cell_Reset(&adc_fuel_cells[i]);
adc_fuel_cells[i].state = state;
}
}
}
//uint8_t FosterStudent(TESTER_ADCChannelTypeDef *adc_fc, TESTER_ADCFilterTypeDef *Filter, uint32_t ind)
//{
//#ifndef FOSTER_STUDENT_USER_T_CRITICAL
// uint32_t t_critical[] = FOSTER_STUDENT_T_CRITICALS;
//#endif //FOSTER_STUDENT_USER_T_CRITICAL
// uint8_t res = 0;
//
// uint8_t m = 0;
// uint8_t l = 0;
//
// uint16_t max = adc_fc->ADC_Buff[ind];
// uint16_t min = adc_fc->ADC_Buff[ind];
//
// int16_t d_sum = 0;
// uint32_t t;
//
// uint16_t arr_size;
// if(ind < Filter->array_size)
// return 0xFF;
//
// for(int i = ind; i > ind - Filter->array_size; i--)
// {
//
// if(adc_fc->ADC_Buff[i] > max)
// {
// max = adc_fc->ADC_Buff[i];
// m = 1;
// }
// else
// m = 0;
// if(adc_fc->ADC_Buff[i] < min)
// {
// min = adc_fc->ADC_Buff[i];
// l = 1;
// }
// else
// l = 0;
// d_sum += (m-l);
// }
//
//#define fixed_base 1000
// if(d_sum < 0)
// d_sum = -d_sum;
// t = d_sum*fixed_base*fixed_base/FOSTER_STUDENT_MSE;
//
// Filter->t_current = t;
//#ifndef FOSTER_STUDENT_USER_T_CRITICAL
// Filter->t_critical = t_critical[Filter->precise_table_ind];
//#endif //FOSTER_STUDENT_USER_T_CRITICAL
//
//
// if(Filter->t_current > Filter->t_critical)
// {
// res = 1;
// }
// else
// {
// res = 0;
// }
//
//
//
// return res;
//}
void ADC_DMA_WaitForStableVoltage(TESTER_ADCChannelTypeDef *adc_fc, TESTER_ADCFilterTypeDef *Filter, uint32_t ind)
{
// if(FosterStudent(adc_fc, Filter, ind) == 0)
// {
// /* Сохраняем индекс еще стабильного напряжения */
// adc_fc->stable_start_ind = ind - Filter->array_size/2;
// /* Переключение на стабильное напряжение найдено */
// adc_fc->state = WAIT_FOR_DROP;
// }
}
void ADC_DMA_WaitForDropVoltage(TESTER_ADCChannelTypeDef *adc_fc, TESTER_ADCFilterTypeDef *Filter, uint32_t ind)
{
// if(FosterStudent(adc_fc, Filter, ind) == 1)
// {
// /* Сохраняем индекс еще стабильного напряжения */
// adc_fc->stable_end_ind = ind-Filter->array_size/2;
// /* Переключение на стабильное напряжение найдено */
// adc_fc->state = STABLE_FOUND;
// }
}
void ADC_DMA_CalcStabilized(TESTER_ADCChannelTypeDef *adc_fc)
{
uint16_t tmp_val = 0;
uint32_t val_sum = 0;
adc_fc->ADC_Max = 0;
adc_fc->ADC_Min = 0xFFFF;
/* Просмотр стабильных значений в буфере */
for(int i = 0; i < ADC_BUFF_SIZE; i++)
{
tmp_val = adc_fc->ADC_Buff[i];
/* Обновление максимального значения */
if(tmp_val > adc_fc->ADC_Max)
{
adc_fc->ADC_Max = tmp_val;
adc_fc->max_value_ind = i;
}
/* Обновление минимального значения */
if(tmp_val < adc_fc->ADC_Min)
{
adc_fc->ADC_Min = tmp_val;
}
}
/* Расчет среднего значения в пике */
for(int i = (adc_fc->max_value_ind - adc_fc->pulse_width)/2; i < (adc_fc->max_value_ind + adc_fc->pulse_width/2); i++)
{
tmp_val = adc_fc->ADC_Buff[i];
/* Накопление значений для расчета среднего */
val_sum += tmp_val;
}
adc_fc->ADC_Filtered = val_sum/(adc_fc->pulse_width);
}
void ADC_DMA_ProcessSingleBuffer(TESTER_ADCChannelTypeDef *adc_fc)
{
}
void ADC_DMA_ProcessBuffer(TESTER_ADCTypeDef *adc)
{
ADC_DMA_ProcessSingleBuffer(&adc->chAdc);
}
void ADC_DMA_BufferHandler(TESTER_ADCChannelTypeDef *adc_fc, TESTER_ADCFilterTypeDef *Filter, uint32_t ind)
{
// switch(adc_fc->state)
// {
// /* Канал не проверяется */
// case NOT_CHECKING:
// break;
//
// /* Пока на каналах не зарядится кондер */
// case WAIT_FOR_STABLE:
//// ADC_DMA_WaitForStableVoltage(adc_fc, Filter, ind);
// break;
//
// /* Проверка пока на первом канале не начнет разряжаться кондер */
// case WAIT_FOR_DROP:
//// ADC_DMA_WaitForDropVoltage(adc_fc, Filter, ind);
// break;
//
// /* Стабильное напряжение найдено */
// case STABLE_FOUND:
// /* Стабильное напряжение НЕ найдено */
// case STABLE_NOT_FOUND:
// /* Конец стабильного напряжения НЕ найден */
// case DROP_NOT_FOUND:
// break;
//
//
// /* Если состояние неопределенное */
// default:
// adc_fc->state = NOT_CHECKING;
// break;
//
// }
}
/**
* @brief Считывать АЦП до тех пор, пока буфер DMA не заполнится и не будет обработан
*/
HAL_StatusTypeDef ADC_DMA_ReadWhileDMA(TESTER_ADCTypeDef *adc, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
/* Проверка принятых параметров функции */
if(adc == 0)
{
ADC_DMA_StopRead(adc);
printf_adc_err("\n%d: Error ADC: Handle is NULL)", uwTick);
return HAL_ERROR;
}
if(Timeout == 0)
{
ADC_DMA_StopRead(adc);
printf_adc_err("\n%d: Error ADC: Read timeout is NULL)", uwTick);
return HAL_ERROR;
}
int adc_buff_ind = 1;
uint16_t filter_halfend = ADC_BUFF_SIZE/2;
uint16_t filter_end = ADC_BUFF_SIZE;
uint8_t run_adc_check = 0;
uint8_t expected_dmaBufferHalf = 1;
/* Обработка АЦП */
while(1)
{
/* Проверка на таймаут */
if(HAL_GetTick() - tickstart > Timeout)
{
ADC_DMA_StopRead(adc);
printf_adc_err("\n%d: Error ADC: Stable Not Found (Timeout)", uwTick);
return HAL_TIMEOUT;
}
/* Запуск обработки данных из DMA буфера, когда они готовы */
if( (expected_dmaBufferHalf == adc->f.dmaBufferHalfDone) && // Ожидаемая половина DMA буфера готова
(run_adc_check == 0)) // Обработка предыдущей половины не активна
{
run_adc_check = 1;
if(adc->f.dmaBufferHalfDone == 1)
printf_adc_processing("\n%d: ADC Processing DMA start...", uwTick);
else if(adc->f.dmaBufferHalfDone == 2)
printf_adc_processing("\n%d: ADC Processing DMA 2-half start...", uwTick);
}
/* Обработка буфера DMA */
if(run_adc_check)
{
/* Вызов обработчиков буфера DMA для каждого канала, если он выбран */
ADC_DMA_BufferHandler(&adc->chAdc, &adc->filter, adc_buff_ind);
/* Переход на следующие во времени значения каналов АЦП */
adc_buff_ind++;
/* если это первая половина DMA буфера */
if(expected_dmaBufferHalf == 1)
{
if(adc_buff_ind > filter_halfend) // Проверка первой половины закончена
{
adc_buff_ind = filter_halfend; // Выставляем индекс на вторую половину
run_adc_check = 0; // Сбрасываем флаг проверки каналов
expected_dmaBufferHalf = 2; // Устанавливаем ожидание готовности второй половины данных DMA буфера
printf_adc_processing("\n%d: ADC Processing 1-half DMA complete, wait for 2-half...", uwTick);
}
}
/* если это вторая половина DMA буфера */
else if(expected_dmaBufferHalf == 2)
{
/* Если АЦП работает - останавливаем его */
// note: пока без кольцевого режима, если за один цикл буфера ничего не удалось словить, вряд ли далее что-то появиться??
if(adc->f.adc_running)
{
ADC_DMA_StopRead(adc);
printf_adc_processing(": wait for processing complete...");
}
if(adc_buff_ind > filter_end) // Проверка первой половины закончена
{
adc_buff_ind = 0; // Выставляем индекс на первую половину
run_adc_check = 0; // Сбрасываем флаг проверки каналов
expected_dmaBufferHalf = 1; // Устанавливаем ожидание готовности первой половины данных DMA буфера
printf_adc_processing("\n%d: ADC Processing DMA complete", uwTick);
break;
}
}
/* если это "никакая" половина DMA буфера */
else
{ /* Сброс всего */
printf_adc_err("\n%d: ADC Processing DMA unexcpected half", uwTick);
adc_buff_ind = 0;
run_adc_check = 0;
expected_dmaBufferHalf = 1;
}
}
}
ADC_DMA_CalcStabilized(&adc->chAdc);
return HAL_OK;
}

156
diode_tester/Core/Tester_main/tester_adc_func.h Normal file
View File

@ -0,0 +1,156 @@
/**
**************************************************************************
* @file tester_func.h
* @brief Заголовочный файл для функций МЗКТ.
**************************************************************************
@details
*************************************************************************/
#ifndef _TESTER_ADC_FUNC_H_
#define _TESTER_ADC_FUNC_H_
#include "mylibs_include.h"
#define ADC_MEASURE_CHANNEL_0_Pos 0x00
#define ADC_MEASURE_CHANNEL_1_Pos 0x01
#define ADC_MEASURE_CHANNEL_2_Pos 0x02
#define ADC_MEASURE_CHANNEL_3_Pos 0x03
#define ADC_MEASURE_CHANNEL_0 (0x01 << ADC_MEASURE_CHANNEL_0_Pos)
#define ADC_MEASURE_CHANNEL_1 (0x01 << ADC_MEASURE_CHANNEL_1_Pos)
#define ADC_MEASURE_CHANNEL_2 (0x01 << ADC_MEASURE_CHANNEL_2_Pos)
#define ADC_MEASURE_CHANNEL_3 (0x01 << ADC_MEASURE_CHANNEL_3_Pos)
#define ADC_CH_IGNORE NULL // должно быть NULL!!!
#define Measure_Get_Channel(_chPtr_) (_chPtr_)->Tadc->chAdc
#define Measure_Get_Voltage(_chPtr_) ((_chPtr_)->Tadc->chAdc->U_Current)
#define Measure_Get_Zero(_chPtr_) ((_chPtr_)->Tadc->chAdc->refADC_zero)
#define Measure_Get_Calibr(_chPtr_) ((_chPtr_)->Tadc->chAdc->refADC_calibr)
#define Measure_Get_VoltStep(_chPtr_) ((_chPtr_)->Tadc->chAdc->refU_step)
#define Measure_Get_Filtered(_chPtr_) ((_chPtr_)->Tadc->chAdc->ADC_Filtered)
#define Measure_Calc_CalibrDiff(_chPtr_) abs((int)Measure_Get_Calibr(_chPtr_) - Measure_Get_Zero(_chPtr_))
#define Measure_Calc_FilterDiff(_chPtr_) abs((int)Measure_Get_Filtered(_chPtr_) - Measure_Get_Zero(_chPtr_))
#define Measure_Calc_Voltage(_chPtr_) ((float)Measure_Calc_FilterDiff(_chPtr_)*Measure_Get_VoltStep(_chPtr_))
//#define ADC_GetChannel(_AdcChPtr_) (_AdcChPtr_)->Tadc->chAdc
////#define Measure_Get_Voltage(_AdcChPtr_) ((_AdcChPtr_)->Tadc->chAdc->U_Current)
////#define Measure_Get_Zero(_AdcChPtr_) ((_AdcChPtr_)->Tadc->chAdc->refADC_zero)
////#define Measure_Get_Calibr(_AdcChPtr_) ((_AdcChPtr_)->Tadc->chAdc->refADC_calibr)
////#define Measure_Get_VoltStep(_AdcChPtr_) ((_AdcChPtr_)->Tadc->chAdc->refU_step)
////#define Measure_Get_Filtered(_AdcChPtr_) ((_AdcChPtr_)->Tadc->chAdc->ADC_Filtered)
//#define Channel_Calc_Diff(_AdcChPtr_, _value_) ((int)(_value_) - (_AdcChPtr_)->refADC_zero)
//#define Channel_Calc_CalibrValue(_AdcChPtr_) (abs(Channel_Calc_Diff((_AdcChPtr_), (_AdcChPtr_)->refADC_calibr)) )
//#define Channel_Calc_AdcValue(_AdcChPtr_) (abs(Channel_Calc_Diff((_AdcChPtr_), (_AdcChPtr_)->ADC_Filtered)) )
//#define Channel_Calc_Voltage(_AdcChPtr_) ((float)Channel_Calc_AdcValue(_AdcChPtr_)*(_AdcChPtr_)->refU_step)
typedef uint16_t ADC_BuffTypeDef[ADC_BUFF_SIZE];
typedef enum
{
ADC_DISABLED = 0,
WAIT_FOR_FIRST_HALF = 1,
PROCESSING_FIRST_HALF = 2,
WAIT_FOR_SECOND_HALF = 3,
PROCESSING_SECOND_HALF = 4,
ADC_DONE = 5,
}ADC_ChannelState;
typedef struct
{
ADC_BuffTypeDef ADC_Buff;
uint16_t ADC_Filtered;
float U_Current;
/* Parameter for calc voltage */
uint16_t refADC_zero;
uint16_t refADC_calibr;
float refU_step;
uint16_t ADC_Max;
uint16_t ADC_Min;
unsigned pulse_width;
unsigned max_value_ind;
uint8_t ChMask;
ADC_ChannelState state;
ADCChannel_TrackerTypeDef adc_ch_err;
}TESTER_ADCChannelTypeDef;
typedef struct
{
int32_t t_current;
int32_t t_critical;
#ifdef FOSTER_STUDENT_USER_T_CRITICAL
#else
uint8_t precise_table_ind;
#endif
uint16_t array_size;
}TESTER_ADCFilterTypeDef;
typedef struct
{
TESTER_ADCChannelTypeDef chAdc;
ADC_HandleTypeDef *hadc;
TESTER_ADCFilterTypeDef filter;
struct
{
unsigned adc_running:1;
unsigned enable_dmaBuffTransfer:1;
unsigned dmaBufferHalfDone:2;
unsigned dmaHandlerbusy:1;
}f;
ADC_TrackerTypeDef adc_err;
}TESTER_ADCTypeDef;
extern TESTER_ADCTypeDef tester_adc;
extern uint16_t ADC_DMA_Buff[ADC_DMA_BUFF_SIZE];
extern uint16_t ADC_DMA_HalfBuff[ADC_DMA_BUFF_SIZE/2];
void TESTER_ADC_StructInit(TESTER_ADCTypeDef *adc);
void ADC_DMA_Handler(TESTER_ADCTypeDef *adc);
void ADC_DMA_ProcessBuffer(TESTER_ADCTypeDef *adc);
void ADC_DMA_Channels_Prepare(TESTER_ADCChannelTypeDef *adc_fuel_cells, uint8_t MaskForChannels, uint8_t state);
HAL_StatusTypeDef ADC_DMA_StartRead(TESTER_ADCTypeDef *adc);
HAL_StatusTypeDef ADC_DMA_ReadWhileDMA(TESTER_ADCTypeDef *adc, uint32_t Timeout);
#ifndef printf_adc_result
#define printf_adc_result(...)
#endif
#ifndef printf_adc_processing
#define printf_adc_processing(...)
#endif
#ifndef printf_adc_err
#define printf_adc_err(...)
#endif
#ifndef printf_adc_it
#define printf_adc_it(...)
#endif
#ifndef printf_adc
#define printf_adc(...)
#endif
#endif //_TESTER_ADC_FUNC_H_

67
diode_tester/Core/Tester_main/tester_config.h Normal file
View File

@ -0,0 +1,67 @@
/**
**************************************************************************
* @file tester_config.h
* @brief Конфигурации для тестера диодов
**************************************************************************
* @defgroup TESTER_CONFIGS Configs for project
* @brief Конфигурации для тестера диодов
* @details
@{
*************************************************************************/
#ifndef _TESTER_CONFIG_H_
#define _TESTER_CONFIG_H_
/**
* @addtogroup TESTER_ADC_CONFIG Configs for ADC
* @ingroup TESTER_CONFIGS
* @brief Конфигурации для АЦП
@{
*/
#define ADC_BUFF_SIZE (500) ///< Размер буфера АЦП
#define ADC_DMA_BUFF_SIZE (ADC_BUFF_SIZE*4) ///< Размер буфера ДМА (4 канала)
#define ADC_U_CALIBR ((float)1.1) ///< Напряжение, которое подается при калибровке
#define ADC_READ_TIMEOUT_MS 20 ///< Таймаут на ожидание разрядки конденсатора
#define ADC_ZERO_WAIT_TIMEOUS_MS 100 ///< Таймаут на ожидание нуля (при калибровке)
#define FOSTER_STUDENT_N 40 ///< Выборка для определения начала разрядки конденсатора
#define FOSTER_STUDENT_MSE 2561 /*!< @brief Среднеквадратическая ошибка для выборки размером FOSTER_STUDENT_N, умноженная на 1000
@details Выражение для СКО: sqrt(2*ln(N) - 0,8456)
URL: https://old.stgau.ru/company/personal/user/7750/files/lib/%D0%A1%D1%82%D0%B0%D1%82%D0%B8%D1%81%D1%82%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%B8%D0%B5%20%D0%BC%D0%B5%D1%82%D0%BE%D0%B4%D1%8B%20%D0%BF%D1%80%D0%BE%D0%B3%D0%BD%D0%BE%D0%B7%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D1%8F/%D0%9F%D1%80%D0%B0%D0%BA%D1%82%D0%B8%D0%BA%D1%83%D0%BC_%D1%82%D0%B5%D0%BC%D0%B0%201.pdf
*/
/**
* @brief Критическое значение Стьюдента
* @details Используется для определения разрядки конденсатора.
* Записывается в единицах*1000
* @note Если закомментировать, то будет использоваться таблица указанная в @ref FOSTER_STUDENT_T_CRITICALS
с индексом, указанным в @ref precise_table_ind
*/
#define FOSTER_STUDENT_USER_T_CRITICAL 1600//2650//2500
/**
* @brief Критическое значение Стьюдента для калибровки
* @details Используется для определения разрядки конденсатора при калибровке.
* Записывается в единицах*1000
* @note Если закомментировать, то будет использоваться значение указанное в @ref FOSTER_STUDENT_USER_T_CRITICAL
*/
//#define FOSTER_STUDENT_USER_T_CRITICAL_CALIBR 2600//2650//2500
/**
* @brief Таблица критических значений Стьюдента с разной погрешностью
* @details Используется для определения разрядки конденсатора при закомментированном
* @ref FOSTER_STUDENT_USER_T_CRITICAL
*/
#define FOSTER_STUDENT_T_CRITICALS {257, 688, 1328, 1729, 2093, 2539}
/** TESTER_ADC_CONFIG
* @}
*/
/** TESTER_CONFIGS
* @}
*/
#endif //_TESTER_CONFIG_H_

915
diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h Normal file
View File

@ -0,0 +1,915 @@
/**
******************************************************************************
* @file stm32f1xx_hal_uart.h
* @author MCD Application Team
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_UART_H
#define __STM32F1xx_HAL_UART_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_def.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @addtogroup UART
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UART_Exported_Types UART Exported Types
* @{
*/
/**
* @brief UART Init Structure definition
*/
typedef struct
{
uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
The baud rate is computed using the following formula:
- IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate)))
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref UART_Word_Length */
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref UART_Stop_Bits */
uint32_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref UART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref UART_Mode */
uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
This parameter can be a value of @ref UART_Hardware_Flow_Control */
uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
This parameter can be a value of @ref UART_Over_Sampling. This feature is only available
on STM32F100xx family, so OverSampling parameter should always be set to 16. */
} UART_InitTypeDef;
/**
* @brief HAL UART State structures definition
* @note HAL UART State value is a combination of 2 different substates: gState and RxState.
* - gState contains UART state information related to global Handle management
* and also information related to Tx operations.
* gState value coding follow below described bitmap :
* b7-b6 Error information
* 00 : No Error
* 01 : (Not Used)
* 10 : Timeout
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
* 1 : Init done (Peripheral initialized. HAL UART Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
* 0 : Ready
* 1 : Busy (Peripheral busy with some configuration or internal operations)
* b1 (not used)
* x : Should be set to 0
* b0 Tx state
* 0 : Ready (no Tx operation ongoing)
* 1 : Busy (Tx operation ongoing)
* - RxState contains information related to Rx operations.
* RxState value coding follow below described bitmap :
* b7-b6 (not used)
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
* 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
* 0 : Ready (no Rx operation ongoing)
* 1 : Busy (Rx operation ongoing)
* b0 (not used)
* x : Should be set to 0.
*/
typedef enum
{
HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
Value is allowed for gState and RxState */
HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
Value is allowed for gState and RxState */
HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
Value is allowed for gState only */
HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
Value is allowed for gState only */
HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
Value is allowed for RxState only */
HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
Not to be used for neither gState nor RxState.
Value is result of combination (Or) between gState and RxState values */
HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
Value is allowed for gState only */
HAL_UART_STATE_ERROR = 0xE0U /*!< Error
Value is allowed for gState only */
} HAL_UART_StateTypeDef;
/**
* @brief HAL UART Reception type definition
* @note HAL UART Reception type value aims to identify which type of Reception is ongoing.
* This parameter can be a value of @ref UART_Reception_Type_Values :
* HAL_UART_RECEPTION_STANDARD = 0x00U,
* HAL_UART_RECEPTION_TOIDLE = 0x01U,
*/
typedef uint32_t HAL_UART_RxTypeTypeDef;
/**
* @brief HAL UART Rx Event type definition
* @note HAL UART Rx Event type value aims to identify which type of Event has occurred
* leading to call of the RxEvent callback.
* This parameter can be a value of @ref UART_RxEvent_Type_Values :
* HAL_UART_RXEVENT_TC = 0x00U,
* HAL_UART_RXEVENT_HT = 0x01U,
* HAL_UART_RXEVENT_IDLE = 0x02U,
*/
typedef uint32_t HAL_UART_RxEventTypeTypeDef;
/**
* @brief UART handle Structure definition
*/
typedef struct __UART_HandleTypeDef
{
USART_TypeDef *Instance; /*!< UART registers base address */
UART_InitTypeDef Init; /*!< UART communication parameters */
const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
uint16_t TxXferSize; /*!< UART Tx Transfer size */
__IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
uint16_t RxXferSize; /*!< UART Rx Transfer size */
__IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
__IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */
__IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */
DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
and also related to Tx operations.
This parameter can be a value of @ref HAL_UART_StateTypeDef */
__IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
This parameter can be a value of @ref HAL_UART_StateTypeDef */
__IO uint32_t ErrorCode; /*!< UART Error code */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */
void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */
void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */
void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */
void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */
void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */
void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */
void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */
void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */
void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */
void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
} UART_HandleTypeDef;
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/**
* @brief HAL UART Callback ID enumeration definition
*/
typedef enum
{
HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */
HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */
HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */
HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */
HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */
HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */
HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */
HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */
HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */
HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */
HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */
} HAL_UART_CallbackIDTypeDef;
/**
* @brief HAL UART Callback pointer definition
*/
typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UART_Exported_Constants UART Exported Constants
* @{
*/
/** @defgroup UART_Error_Code UART Error Code
* @{
*/
#define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */
#define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */
#define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */
#define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */
#define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
#define HAL_UART_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup UART_Word_Length UART Word Length
* @{
*/
#define UART_WORDLENGTH_8B 0x00000000U
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
/**
* @}
*/
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
* @{
*/
#define UART_STOPBITS_1 0x00000000U
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
/**
* @}
*/
/** @defgroup UART_Parity UART Parity
* @{
*/
#define UART_PARITY_NONE 0x00000000U
#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
/**
* @}
*/
/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
* @{
*/
#define UART_HWCONTROL_NONE 0x00000000U
#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
/**
* @}
*/
/** @defgroup UART_Mode UART Transfer Mode
* @{
*/
#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE | USART_CR1_RE))
/**
* @}
*/
/** @defgroup UART_State UART State
* @{
*/
#define UART_STATE_DISABLE 0x00000000U
#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
/**
* @}
*/
/** @defgroup UART_Over_Sampling UART Over Sampling
* @{
*/
#define UART_OVERSAMPLING_16 0x00000000U
#if defined(USART_CR1_OVER8)
#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
#endif /* USART_CR1_OVER8 */
/**
* @}
*/
/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
* @{
*/
#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
/**
* @}
*/
/** @defgroup UART_WakeUp_functions UART Wakeup Functions
* @{
*/
#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U
#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
/**
* @}
*/
/** @defgroup UART_Flags UART FLags
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the SR register
* @{
*/
#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
/**
* @}
*/
/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
* Elements values convention: 0xY000XXXX
* - XXXX : Interrupt mask (16 bits) in the Y register
* - Y : Interrupt source register (2bits)
* - 0001: CR1 register
* - 0010: CR2 register
* - 0011: CR3 register
* @{
*/
#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
/**
* @}
*/
/** @defgroup UART_Reception_Type_Values UART Reception type values
* @{
*/
#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */
#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */
/**
* @}
*/
/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values
* @{
*/
#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */
#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */
#define HAL_UART_RXEVENT_IDLE (0x00000002U)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup UART_Exported_Macros UART Exported Macros
* @{
*/
/** @brief Reset UART handle gstate & RxState
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0U)
#else
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
} while(0U)
#endif /*USE_HAL_UART_REGISTER_CALLBACKS */
/** @brief Flushes the UART DR register
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
*/
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
/** @brief Checks whether the specified UART flag is set or not.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
* @arg UART_FLAG_LBD: LIN Break detection flag
* @arg UART_FLAG_TXE: Transmit data register empty flag
* @arg UART_FLAG_TC: Transmission Complete flag
* @arg UART_FLAG_RXNE: Receive data register not empty flag
* @arg UART_FLAG_IDLE: Idle Line detection flag
* @arg UART_FLAG_ORE: Overrun Error flag
* @arg UART_FLAG_NE: Noise Error flag
* @arg UART_FLAG_FE: Framing Error flag
* @arg UART_FLAG_PE: Parity Error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/** @brief Clears the specified UART pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __FLAG__ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
* @arg UART_FLAG_LBD: LIN Break detection flag.
* @arg UART_FLAG_TC: Transmission Complete flag.
* @arg UART_FLAG_RXNE: Receive data register not empty flag.
*
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
* error) and IDLE (Idle line detected) flags are cleared by software
* sequence: a read operation to USART_SR register followed by a read
* operation to USART_DR register.
* @note RXNE flag can be also cleared by a read to the USART_DR register.
* @note TC flag can be also cleared by software sequence: a read operation to
* USART_SR register followed by a write operation to USART_DR register.
* @note TXE flag is cleared only by a write to the USART_DR register.
*
* @retval None
*/
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
/** @brief Clears the UART PE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
do{ \
__IO uint32_t tmpreg = 0x00U; \
tmpreg = (__HANDLE__)->Instance->SR; \
tmpreg = (__HANDLE__)->Instance->DR; \
UNUSED(tmpreg); \
} while(0U)
/** @brief Clears the UART FE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clears the UART NE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clears the UART ORE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Clears the UART IDLE pending flag.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @retval None
*/
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
/** @brief Enable the specified UART interrupt.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __INTERRUPT__ specifies the UART interrupt source to enable.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_PE: Parity Error interrupt
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
/** @brief Disable the specified UART interrupt.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __INTERRUPT__ specifies the UART interrupt source to disable.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_PE: Parity Error interrupt
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
/** @brief Checks whether the specified UART interrupt source is enabled or not.
* @param __HANDLE__ specifies the UART Handle.
* UART Handle selects the USARTx or UARTy peripheral
* (USART,UART availability and x,y values depending on device).
* @param __IT__ specifies the UART interrupt source to check.
* This parameter can be one of the following values:
* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
* @arg UART_IT_LBD: LIN Break detection interrupt
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
* @arg UART_IT_TC: Transmission complete interrupt
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
* @arg UART_IT_IDLE: Idle line detection interrupt
* @arg UART_IT_ERR: Error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
/** @brief Enable CTS flow control
* @note This macro allows to enable CTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
do{ \
ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
} while(0U)
/** @brief Disable CTS flow control
* @note This macro allows to disable CTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
do{ \
ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
} while(0U)
/** @brief Enable RTS flow control
* This macro allows to enable RTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
do{ \
ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
} while(0U)
/** @brief Disable RTS flow control
* This macro allows to disable RTS hardware flow control for a given UART instance,
* without need to call HAL_UART_Init() function.
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
* It is used to select the USART peripheral (USART availability and x value depending on device).
* @retval None
*/
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
do{ \
ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
} while(0U)
#if defined(USART_CR3_ONEBIT)
/** @brief Macro to enable the UART's one bit sample method
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
/** @brief Macro to disable the UART's one bit sample method
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\
&= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
#endif /* UART_ONE_BIT_SAMPLE_Feature */
/** @brief Enable UART
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
/** @brief Disable UART
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UART_Exported_Functions
* @{
*/
/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization/de-initialization functions **********************************/
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart);
void HAL_UART_MspInit(UART_HandleTypeDef *huart);
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID,
pUART_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
* @{
*/
/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
uint32_t Timeout);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart);
/* Transfer Abort functions */
HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size);
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
/**
* @}
*/
/** @addtogroup UART_Exported_Functions_Group4
* @{
*/
/* Peripheral State functions **************************************************/
HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart);
uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup UART_Private_Constants UART Private Constants
* @{
*/
/** @brief UART interruptions flag mask
*
*/
#define UART_IT_MASK 0x0000FFFFU
#define UART_CR1_REG_INDEX 1U
#define UART_CR2_REG_INDEX 2U
#define UART_CR3_REG_INDEX 3U
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UART_Private_Macros UART Private Macros
* @{
*/
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
((STOPBITS) == UART_STOPBITS_2))
#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
((PARITY) == UART_PARITY_EVEN) || \
((PARITY) == UART_PARITY_ODD))
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
(((CONTROL) == UART_HWCONTROL_NONE) || \
((CONTROL) == UART_HWCONTROL_RTS) || \
((CONTROL) == UART_HWCONTROL_CTS) || \
((CONTROL) == UART_HWCONTROL_RTS_CTS))
#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U))
#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
((STATE) == UART_STATE_ENABLE))
#if defined(USART_CR1_OVER8)
#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
((SAMPLING) == UART_OVERSAMPLING_8))
#endif /* USART_CR1_OVER8 */
#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 4500000U)
#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_)))
#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U)\
+ 50U) / 100U)
/* UART BRR = mantissa + overflow + fraction
= (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U)) + \
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(2U*(_BAUD_)))
#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U)\
+ 50U) / 100U)
/* UART BRR = mantissa + overflow + fraction
= (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U)) + \
(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup UART_Private_Functions UART Private Functions
* @{
*/
HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_UART_H */

2569
diode_tester/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usart.h Normal file
View File

File diff suppressed because it is too large Load Diff

3771
diode_tester/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c Normal file
View File

File diff suppressed because it is too large Load Diff

9
diode_tester/MDK-ARM/EventRecorderStub.scvd Normal file
View File

@ -0,0 +1,9 @@
<?xml version="1.0" encoding="utf-8"?>
<component_viewer schemaVersion="0.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="Component_Viewer.xsd">
<component name="EventRecorderStub" version="1.0.0"/> <!--name and version of the component-->
<events>
</events>
</component_viewer>

420
diode_tester/MDK-ARM/diode_tester.uvoptx
View File

@ -117,6 +117,26 @@
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon> <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
</DebugOpt> </DebugOpt>
<TargetDriverDllRegistry> <TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMRTXEVENTFLAGS</Key>
<Name>-L70 -Z18 -C0 -M0 -T1</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGTARM</Key>
<Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMDBGFLAGS</Key>
<Name></Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGUARM</Key>
<Name>(105=-1,-1,-1,-1,0)</Name>
</SetRegEntry>
<SetRegEntry> <SetRegEntry>
<Number>0</Number> <Number>0</Number>
<Key>UL2CM3</Key> <Key>UL2CM3</Key>
@ -125,10 +145,34 @@
<SetRegEntry> <SetRegEntry>
<Number>0</Number> <Number>0</Number>
<Key>ST-LINKIII-KEIL_SWO</Key> <Key>ST-LINKIII-KEIL_SWO</Key>
<Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL08000 -FP0($$Device:STM32F103C6$Flash\STM32F10x_128.FLM)</Name> <Name>-U53FF72064980555724221187 -O2254 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(1BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL08000 -FP0($$Device:STM32F103C6$Flash\STM32F10x_128.FLM) -WA0 -WE0 -WVCE4 -WS2710 -WM0 -WP2</Name>
</SetRegEntry> </SetRegEntry>
</TargetDriverDllRegistry> </TargetDriverDllRegistry>
<Breakpoint/> <Breakpoint/>
<WatchWindow1>
<Ww>
<count>0</count>
<WinNumber>1</WinNumber>
<ItemText>tester_adc,0x10</ItemText>
</Ww>
<Ww>
<count>1</count>
<WinNumber>1</WinNumber>
<ItemText>ADC_DMA_HalfBuff,0x0A</ItemText>
</Ww>
</WatchWindow1>
<WatchWindow2>
<Ww>
<count>0</count>
<WinNumber>2</WinNumber>
<ItemText>before_pulse_delay</ItemText>
</Ww>
<Ww>
<count>1</count>
<WinNumber>2</WinNumber>
<ItemText>pulse_delay</ItemText>
</Ww>
</WatchWindow2>
<Tracepoint> <Tracepoint>
<THDelay>0</THDelay> <THDelay>0</THDelay>
</Tracepoint> </Tracepoint>
@ -171,6 +215,24 @@
<pszMrulep></pszMrulep> <pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp> <pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp> <pMultCmdsp></pMultCmdsp>
<SystemViewers>
<Entry>
<Name>System Viewer\ADC1</Name>
<WinId>35903</WinId>
</Entry>
<Entry>
<Name>System Viewer\DMA1</Name>
<WinId>35902</WinId>
</Entry>
<Entry>
<Name>System Viewer\GPIOA</Name>
<WinId>35904</WinId>
</Entry>
<Entry>
<Name>System Viewer\GPIOC</Name>
<WinId>35905</WinId>
</Entry>
</SystemViewers>
<DebugDescription> <DebugDescription>
<Enable>1</Enable> <Enable>1</Enable>
<EnableFlashSeq>0</EnableFlashSeq> <EnableFlashSeq>0</EnableFlashSeq>
@ -182,14 +244,250 @@
</Target> </Target>
<Group> <Group>
<GroupName>Application/MDK-ARM</GroupName> <GroupName>Configs</GroupName>
<tvExp>0</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>1</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>1</FileNumber> <FileNumber>1</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\MyLibs\mylibs_config.h</PathWithFileName>
<FilenameWithoutPath>mylibs_config.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\interface_config.h</PathWithFileName>
<FilenameWithoutPath>interface_config.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\MyLibs\mylibs_include.h</PathWithFileName>
<FilenameWithoutPath>mylibs_include.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Tester_main\tester_config.h</PathWithFileName>
<FilenameWithoutPath>tester_config.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Tester Main</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Tester_main\tester_adc_func.c</PathWithFileName>
<FilenameWithoutPath>tester_adc_func.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Tester_main\tester_adc_func.h</PathWithFileName>
<FilenameWithoutPath>tester_adc_func.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Interfaces</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>7</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\crc_algs.c</PathWithFileName>
<FilenameWithoutPath>crc_algs.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>8</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\crc_algs.h</PathWithFileName>
<FilenameWithoutPath>crc_algs.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\modbus.c</PathWithFileName>
<FilenameWithoutPath>modbus.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>10</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\modbus.h</PathWithFileName>
<FilenameWithoutPath>modbus.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>11</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\modbus_data.h</PathWithFileName>
<FilenameWithoutPath>modbus_data.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>12</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\rs_message.c</PathWithFileName>
<FilenameWithoutPath>rs_message.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>13</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Interfaces\rs_message.h</PathWithFileName>
<FilenameWithoutPath>rs_message.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>MyLibs</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>14</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\MyLibs\bit_access.h</PathWithFileName>
<FilenameWithoutPath>bit_access.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>15</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\MyLibs\mylibs_defs.h</PathWithFileName>
<FilenameWithoutPath>mylibs_defs.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>16</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\MyLibs\trace.h</PathWithFileName>
<FilenameWithoutPath>trace.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>17</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\MyLibs\trackers.h</PathWithFileName>
<FilenameWithoutPath>trackers.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Application/MDK-ARM</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>18</FileNumber>
<FileType>2</FileType> <FileType>2</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -208,8 +506,8 @@
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>2</FileNumber> <FileNumber>19</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -220,8 +518,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>3</FileNumber> <FileNumber>20</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -232,8 +530,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>4</FileNumber> <FileNumber>21</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -244,8 +542,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>5</FileNumber> <FileNumber>22</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -256,8 +554,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>6</FileNumber> <FileNumber>23</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -268,8 +566,20 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>7</FileNumber> <FileNumber>24</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Core/Src/usart.c</PathWithFileName>
<FilenameWithoutPath>usart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>25</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -280,8 +590,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>6</GroupNumber>
<FileNumber>8</FileNumber> <FileNumber>26</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -300,8 +610,8 @@
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>9</FileNumber> <FileNumber>27</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -312,8 +622,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>10</FileNumber> <FileNumber>28</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -324,8 +634,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>11</FileNumber> <FileNumber>29</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -336,8 +646,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>12</FileNumber> <FileNumber>30</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -348,8 +658,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>13</FileNumber> <FileNumber>31</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -360,8 +670,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>14</FileNumber> <FileNumber>32</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -372,8 +682,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>15</FileNumber> <FileNumber>33</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -384,8 +694,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>16</FileNumber> <FileNumber>34</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -396,8 +706,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>17</FileNumber> <FileNumber>35</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -408,8 +718,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>18</FileNumber> <FileNumber>36</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -420,8 +730,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>19</FileNumber> <FileNumber>37</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -432,8 +742,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>20</FileNumber> <FileNumber>38</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -444,8 +754,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>21</FileNumber> <FileNumber>39</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -456,8 +766,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>22</FileNumber> <FileNumber>40</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -468,8 +778,8 @@
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>7</GroupNumber>
<FileNumber>23</FileNumber> <FileNumber>41</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
@ -479,6 +789,18 @@
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>42</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_uart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group> </Group>
<Group> <Group>
@ -488,8 +810,8 @@
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>8</GroupNumber>
<FileNumber>24</FileNumber> <FileNumber>43</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>

221
diode_tester/MDK-ARM/diode_tester.uvprojx
View File

@ -82,7 +82,7 @@
</BeforeMake> </BeforeMake>
<AfterMake> <AfterMake>
<RunUserProg1>0</RunUserProg1> <RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2> <RunUserProg2>1</RunUserProg2>
<UserProg1Name></UserProg1Name> <UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name> <UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
@ -341,7 +341,7 @@
<MiscControls></MiscControls> <MiscControls></MiscControls>
<Define>USE_HAL_DRIVER,STM32F103x6</Define> <Define>USE_HAL_DRIVER,STM32F103x6</Define>
<Undefine></Undefine> <Undefine></Undefine>
<IncludePath>../Core/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include</IncludePath> <IncludePath>../Core/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include;../Core/MyLibs;../Core/Interfaces;../Core/Tester_main</IncludePath>
</VariousControls> </VariousControls>
</Cads> </Cads>
<Aads> <Aads>
@ -382,6 +382,111 @@
</TargetArmAds> </TargetArmAds>
</TargetOption> </TargetOption>
<Groups> <Groups>
<Group>
<GroupName>Configs</GroupName>
<Files>
<File>
<FileName>mylibs_config.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\MyLibs\mylibs_config.h</FilePath>
</File>
<File>
<FileName>interface_config.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Interfaces\interface_config.h</FilePath>
</File>
<File>
<FileName>mylibs_include.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\MyLibs\mylibs_include.h</FilePath>
</File>
<File>
<FileName>tester_config.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Tester_main\tester_config.h</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Tester Main</GroupName>
<Files>
<File>
<FileName>tester_adc_func.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Tester_main\tester_adc_func.c</FilePath>
</File>
<File>
<FileName>tester_adc_func.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Tester_main\tester_adc_func.h</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Interfaces</GroupName>
<Files>
<File>
<FileName>crc_algs.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Interfaces\crc_algs.c</FilePath>
</File>
<File>
<FileName>crc_algs.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Interfaces\crc_algs.h</FilePath>
</File>
<File>
<FileName>modbus.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Interfaces\modbus.c</FilePath>
</File>
<File>
<FileName>modbus.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Interfaces\modbus.h</FilePath>
</File>
<File>
<FileName>modbus_data.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Interfaces\modbus_data.h</FilePath>
</File>
<File>
<FileName>rs_message.c</FileName>
<FileType>1</FileType>
<FilePath>..\Core\Interfaces\rs_message.c</FilePath>
</File>
<File>
<FileName>rs_message.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Interfaces\rs_message.h</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>MyLibs</GroupName>
<Files>
<File>
<FileName>bit_access.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\MyLibs\bit_access.h</FilePath>
</File>
<File>
<FileName>mylibs_defs.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\MyLibs\mylibs_defs.h</FilePath>
</File>
<File>
<FileName>trace.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\MyLibs\trace.h</FilePath>
</File>
<File>
<FileName>trackers.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\MyLibs\trackers.h</FilePath>
</File>
</Files>
</Group>
<Group> <Group>
<GroupName>Application/MDK-ARM</GroupName> <GroupName>Application/MDK-ARM</GroupName>
<Files> <Files>
@ -522,6 +627,62 @@
</FileArmAds> </FileArmAds>
</FileOption> </FileOption>
</File> </File>
<File>
<FileName>usart.c</FileName>
<FileType>1</FileType>
<FilePath>../Core/Src/usart.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>2</AlwaysBuild>
<GenerateAssemblyFile>2</GenerateAssemblyFile>
<AssembleAssemblyFile>2</AssembleAssemblyFile>
<PublicsOnly>2</PublicsOnly>
<StopOnExitCode>11</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<uGnu>2</uGnu>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
<File> <File>
<FileName>stm32f1xx_it.c</FileName> <FileName>stm32f1xx_it.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
@ -612,6 +773,62 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c</FilePath> <FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c</FilePath>
</File> </File>
<File>
<FileName>stm32f1xx_hal_uart.c</FileName>
<FileType>1</FileType>
<FilePath>../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c</FilePath>
<FileOption>
<CommonProperty>
<UseCPPCompiler>2</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>2</AlwaysBuild>
<GenerateAssemblyFile>2</GenerateAssemblyFile>
<AssembleAssemblyFile>2</AssembleAssemblyFile>
<PublicsOnly>2</PublicsOnly>
<StopOnExitCode>11</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<FileArmAds>
<Cads>
<interw>2</interw>
<Optim>0</Optim>
<oTime>2</oTime>
<SplitLS>2</SplitLS>
<OneElfS>2</OneElfS>
<Strict>2</Strict>
<EnumInt>2</EnumInt>
<PlainCh>2</PlainCh>
<Ropi>2</Ropi>
<Rwpi>2</Rwpi>
<wLevel>0</wLevel>
<uThumb>2</uThumb>
<uSurpInc>2</uSurpInc>
<uC99>2</uC99>
<uGnu>2</uGnu>
<useXO>2</useXO>
<v6Lang>0</v6Lang>
<v6LangP>0</v6LangP>
<vShortEn>2</vShortEn>
<vShortWch>2</vShortWch>
<v6Lto>2</v6Lto>
<v6WtE>2</v6WtE>
<v6Rtti>2</v6Rtti>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
</FileArmAds>
</FileOption>
</File>
</Files> </Files>
</Group> </Group>
<Group> <Group>

47
diode_tester/diode_tester.ioc
View File

@ -1,7 +1,8 @@
#MicroXplorer Configuration settings - do not modify #MicroXplorer Configuration settings - do not modify
ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_0 ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_0
ADC1.ExternalTrigConv=ADC_EXTERNALTRIGCONV_T3_TRGO ADC1.ContinuousConvMode=ENABLE
ADC1.IPParameters=Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,NbrOfConversionFlag,master,ExternalTrigConv ADC1.ExternalTrigConv=ADC_SOFTWARE_START
ADC1.IPParameters=Rank-3\#ChannelRegularConversion,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,NbrOfConversionFlag,master,ExternalTrigConv,ContinuousConvMode
ADC1.NbrOfConversionFlag=1 ADC1.NbrOfConversionFlag=1
ADC1.Rank-3\#ChannelRegularConversion=1 ADC1.Rank-3\#ChannelRegularConversion=1
ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5 ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
@ -13,7 +14,7 @@ Dma.ADC1.0.Direction=DMA_PERIPH_TO_MEMORY
Dma.ADC1.0.Instance=DMA1_Channel1 Dma.ADC1.0.Instance=DMA1_Channel1
Dma.ADC1.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD Dma.ADC1.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
Dma.ADC1.0.MemInc=DMA_MINC_ENABLE Dma.ADC1.0.MemInc=DMA_MINC_ENABLE
Dma.ADC1.0.Mode=DMA_NORMAL Dma.ADC1.0.Mode=DMA_CIRCULAR
Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
Dma.ADC1.0.PeriphInc=DMA_PINC_DISABLE Dma.ADC1.0.PeriphInc=DMA_PINC_DISABLE
Dma.ADC1.0.Priority=DMA_PRIORITY_LOW Dma.ADC1.0.Priority=DMA_PRIORITY_LOW
@ -30,18 +31,24 @@ Mcu.IP1=DMA
Mcu.IP2=NVIC Mcu.IP2=NVIC
Mcu.IP3=RCC Mcu.IP3=RCC
Mcu.IP4=SYS Mcu.IP4=SYS
Mcu.IP5=TIM3 Mcu.IP5=TIM2
Mcu.IPNb=6 Mcu.IP6=TIM3
Mcu.IP7=USART1
Mcu.IPNb=8
Mcu.Name=STM32F103C(4-6)Tx Mcu.Name=STM32F103C(4-6)Tx
Mcu.Package=LQFP48 Mcu.Package=LQFP48
Mcu.Pin0=PD0-OSC_IN Mcu.Pin0=PC13-TAMPER-RTC
Mcu.Pin1=PD1-OSC_OUT Mcu.Pin1=PD0-OSC_IN
Mcu.Pin2=PA0-WKUP Mcu.Pin10=VP_TIM3_VS_ClockSourceINT
Mcu.Pin3=PA13 Mcu.Pin2=PD1-OSC_OUT
Mcu.Pin4=PA14 Mcu.Pin3=PA0-WKUP
Mcu.Pin5=VP_SYS_VS_Systick Mcu.Pin4=PA9
Mcu.Pin6=VP_TIM3_VS_ClockSourceINT Mcu.Pin5=PA10
Mcu.PinsNb=7 Mcu.Pin6=PA13
Mcu.Pin7=PA14
Mcu.Pin8=VP_SYS_VS_Systick
Mcu.Pin9=VP_TIM2_VS_ClockSourceINT
Mcu.PinsNb=11
Mcu.ThirdPartyNb=0 Mcu.ThirdPartyNb=0
Mcu.UserConstants= Mcu.UserConstants=
Mcu.UserName=STM32F103C6Tx Mcu.UserName=STM32F103C6Tx
@ -58,13 +65,21 @@ NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
NVIC.TIM2_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.TIM3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true NVIC.TIM3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
PA0-WKUP.Signal=ADCx_IN0 PA0-WKUP.Signal=ADCx_IN0
PA10.Mode=Asynchronous
PA10.Signal=USART1_RX
PA13.Mode=Serial_Wire PA13.Mode=Serial_Wire
PA13.Signal=SYS_JTMS-SWDIO PA13.Signal=SYS_JTMS-SWDIO
PA14.Mode=Serial_Wire PA14.Mode=Serial_Wire
PA14.Signal=SYS_JTCK-SWCLK PA14.Signal=SYS_JTCK-SWCLK
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PC13-TAMPER-RTC.Locked=true
PC13-TAMPER-RTC.Signal=GPIO_Output
PD0-OSC_IN.Mode=HSE-External-Oscillator PD0-OSC_IN.Mode=HSE-External-Oscillator
PD0-OSC_IN.Signal=RCC_OSC_IN PD0-OSC_IN.Signal=RCC_OSC_IN
PD1-OSC_OUT.Mode=HSE-External-Oscillator PD1-OSC_OUT.Mode=HSE-External-Oscillator
@ -100,7 +115,7 @@ ProjectManager.ToolChainLocation=
ProjectManager.UAScriptAfterPath= ProjectManager.UAScriptAfterPath=
ProjectManager.UAScriptBeforePath= ProjectManager.UAScriptBeforePath=
ProjectManager.UnderRoot=false ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_USART1_UART_Init-USART1-false-HAL-true,7-MX_TIM2_Init-TIM2-false-HAL-true
RCC.ADCFreqValue=12000000 RCC.ADCFreqValue=12000000
RCC.ADCPresc=RCC_ADCPCLK2_DIV6 RCC.ADCPresc=RCC_ADCPCLK2_DIV6
RCC.AHBFreq_Value=72000000 RCC.AHBFreq_Value=72000000
@ -129,8 +144,12 @@ TIM3.IPParameters=Period,Prescaler,TIM_MasterOutputTrigger
TIM3.Period=8999 TIM3.Period=8999
TIM3.Prescaler=0 TIM3.Prescaler=0
TIM3.TIM_MasterOutputTrigger=TIM_TRGO_UPDATE TIM3.TIM_MasterOutputTrigger=TIM_TRGO_UPDATE
USART1.IPParameters=VirtualMode
USART1.VirtualMode=VM_ASYNC
VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_TIM2_VS_ClockSourceINT.Mode=Internal
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
VP_TIM3_VS_ClockSourceINT.Mode=Internal VP_TIM3_VS_ClockSourceINT.Mode=Internal
VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
board=custom board=custom