// TI File $Revision: /main/1 $
// Checkin $Date: August 18, 2006   13:45:39 $
//###########################################################################
//
// FILE:   DSP2833x_EPwm_defines.h
//
// TITLE:  #defines used in ePWM examples examples
// 
//###########################################################################
// $TI Release: DSP2833x/DSP2823x Header Files V1.20 $
// $Release Date: August 1, 2008 $
//###########################################################################

#ifndef DSP2833x_EPWM_DEFINES_H
#define DSP2833x_EPWM_DEFINES_H


#ifdef __cplusplus
extern "C" {
#endif

// TBCTL (Time-Base Control)
//==========================
// CTRMODE bits
#define	TB_COUNT_UP		0x0
#define	TB_COUNT_DOWN	0x1
#define	TB_COUNT_UPDOWN	0x2
#define	TB_FREEZE		0x3
// PHSEN bit
#define	TB_DISABLE		0x0
#define	TB_ENABLE		0x1
// PRDLD bit
#define	TB_SHADOW		0x0
#define	TB_IMMEDIATE	0x1
// SYNCOSEL bits
#define	TB_SYNC_IN		0x0
#define	TB_CTR_ZERO		0x1
#define	TB_CTR_CMPB		0x2
#define	TB_SYNC_DISABLE	0x3
// HSPCLKDIV and CLKDIV bits
#define	TB_DIV1			0x0
#define	TB_DIV2			0x1
#define	TB_DIV4			0x2
// PHSDIR bit
#define	TB_DOWN			0x0
#define	TB_UP			0x1

// CMPCTL (Compare Control)
//==========================
// LOADAMODE and LOADBMODE bits
#define	CC_CTR_ZERO		0x0
#define	CC_CTR_PRD		0x1
#define	CC_CTR_ZERO_PRD	0x2
#define	CC_LD_DISABLE	0x3
// SHDWAMODE and SHDWBMODE bits
#define	CC_SHADOW		0x0
#define	CC_IMMEDIATE	0x1

// AQCTLA and AQCTLB (Action Qualifier Control)
//=============================================
// ZRO, PRD, CAU, CAD, CBU, CBD bits
#define	AQ_NO_ACTION	0x0
#define	AQ_CLEAR		0x1
#define	AQ_SET			0x2
#define	AQ_TOGGLE		0x3

// DBCTL (Dead-Band Control)
//==========================
// OUT MODE bits
#define	DB_DISABLE		0x0
#define	DBA_ENABLE		0x1
#define	DBB_ENABLE		0x2
#define	DB_FULL_ENABLE	0x3
// POLSEL bits
#define	DB_ACTV_HI		0x0
#define	DB_ACTV_LOC		0x1
#define	DB_ACTV_HIC		0x2
#define	DB_ACTV_LO		0x3
// IN MODE
#define DBA_ALL         0x0
#define DBB_RED_DBA_FED 0x1
#define DBA_RED_DBB_FED 0x2
#define DBB_ALL         0x3

// CHPCTL (chopper control)
//==========================
// CHPEN bit
#define	CHP_DISABLE		0x0
#define	CHP_ENABLE		0x1
// CHPFREQ bits
#define	CHP_DIV1		0x0
#define	CHP_DIV2		0x1
#define	CHP_DIV3		0x2
#define	CHP_DIV4		0x3
#define	CHP_DIV5		0x4
#define	CHP_DIV6		0x5
#define	CHP_DIV7		0x6
#define	CHP_DIV8		0x7
// CHPDUTY bits
#define	CHP1_8TH		0x0
#define	CHP2_8TH		0x1
#define	CHP3_8TH		0x2
#define	CHP4_8TH		0x3
#define	CHP5_8TH		0x4
#define	CHP6_8TH		0x5
#define	CHP7_8TH		0x6

// TZSEL (Trip Zone Select)
//==========================
// CBCn and OSHTn bits
#define	TZ_DISABLE		0x0
#define	TZ_ENABLE		0x1

// TZCTL (Trip Zone Control)
//==========================
// TZA and TZB bits
#define	TZ_HIZ			0x0
#define	TZ_FORCE_HI		0x1
#define	TZ_FORCE_LO		0x2
#define	TZ_NO_CHANGE	0x3

// ETSEL (Event Trigger Select)
//=============================
#define	ET_CTR_ZERO		0x1
#define	ET_CTR_PRD		0x2
#define	ET_CTRU_CMPA	0x4
#define	ET_CTRD_CMPA	0x5
#define	ET_CTRU_CMPB	0x6
#define	ET_CTRD_CMPB	0x7

// ETPS (Event Trigger Pre-scale)
//===============================
// INTPRD, SOCAPRD, SOCBPRD bits
#define	ET_DISABLE		0x0
#define	ET_1ST			0x1
#define	ET_2ND			0x2
#define	ET_3RD			0x3


//--------------------------------
// HRPWM (High Resolution PWM)
//================================
// HRCNFG
#define	HR_Disable		0x0
#define	HR_REP			0x1
#define	HR_FEP			0x2
#define	HR_BEP			0x3

#define	HR_CMP			0x0
#define	HR_PHS			0x1

#define	HR_CTR_ZERO		0x0
#define	HR_CTR_PRD		0x1


#ifdef __cplusplus
}
#endif /* extern "C" */

#endif   // - end of DSP2833x_EPWM_DEFINES_H

//===========================================================================
// End of file.
//===========================================================================