// TI File $Revision: /main/5 $
// Checkin $Date: October 23, 2007   13:34:09 $
//###########################################################################
//
// FILE:	DSP2833x_Adc.c
//
// TITLE:	DSP2833x ADC Initialization & Support Functions.
//
//###########################################################################
// $TI Release: DSP2833x/DSP2823x Header Files V1.20 $
// $Release Date: August 1, 2008 $
//###########################################################################

#include "DSP2833x_Device.h"     // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h"   // DSP2833x Examples Include File

#define ADC_usDELAY  5000L

//---------------------------------------------------------------------------
// InitAdc:
//---------------------------------------------------------------------------
// This function initializes ADC to a known state.
//
void InitAdc(void)
{
    extern void DSP28x_usDelay(Uint32 Count);


    // *IMPORTANT*
	// The ADC_cal function, which  copies the ADC calibration values from TI reserved
	// OTP into the ADCREFSEL and ADCOFFTRIM registers, occurs automatically in the
	// Boot ROM. If the boot ROM code is bypassed during the debug process, the
	// following function MUST be called for the ADC to function according
	// to specification. The clocks to the ADC MUST be enabled before calling this
	// function.
	// See the device data manual and/or the ADC Reference
	// Manual for more information.

	    EALLOW;
		SysCtrlRegs.PCLKCR0.bit.ADCENCLK = 1;
		ADC_cal();
		EDIS;




    // To powerup the ADC the ADCENCLK bit should be set first to enable
    // clocks, followed by powering up the bandgap, reference circuitry, and ADC core.
    // Before the first conversion is performed a 5ms delay must be observed
	// after power up to give all analog circuits time to power up and settle

    // Please note that for the delay function below to operate correctly the
	// CPU_RATE define statement in the DSP2833x_Examples.h file must
	// contain the correct CPU clock period in nanoseconds.

	AdcRegs.ADCREFSEL.bit.REF_SEL = 0x01;
    AdcRegs.ADCTRL3.all = 0x00E0;  // Power up bandgap/reference/ADC circuits
    DELAY_US(ADC_usDELAY);         // Delay before converting ADC channels
//pause_us(50L);
}


//===========================================================================
// End of file.
//===========================================================================